Skip to contentSkip to conversation

Support Andes PMU extension

PATCH Applied Yu Chien Peter Lin 6 participants 23 messages Feb 22, 2024 – Mar 14, 2024

Subsystems (9)
lore
Share & tools
lore
#0 lore raw

v9 cover Support Andes PMU extension

Hi All,

This patch series introduces the Andes PMU extension, which serves the same purpose as Sscofpmf and Smcntrpmf. Its non-standard local interrupt is assigned to bit 18 in the custom S-mode local interrupt enable and pending registers (slie/slip), while the interrupt cause is (256 + 18).

The series can be found on Andes Technology GitHub:
- https://github.com/andestech/linux/commits/andes-pmu-support-v9

The PMU device tree node used on AX45MP:
- https://github.com/riscv-software-src/opensbi/blob/master/docs/pmu_support.md#example-3

Locus Wei-Han Chen (1):
riscv: andes: Support specifying symbolic firmware and hardware raw
events

Yu Chien Peter Lin (9):
riscv: errata: Rename defines for Andes irqchip/riscv-intc: Allow large non-standard interrupt number irqchip/riscv-intc: Introduce Andes hart-level interrupt controller
dt-bindings: riscv: Add Andes interrupt controller compatible string
riscv: dts: renesas: r9a07g043f: Update compatible string to use Andes
INTC
perf: RISC-V: Eliminate redundant interrupt enable/disable operations
perf: RISC-V: Introduce Andes PMU to support perf event sampling
dt-bindings: riscv: Add Andes PMU extension description
riscv: dts: renesas: Add Andes PMU extension for r9a07g043f

 .../devicetree/bindings/riscv/cpus.yaml       |   6 +-
 .../devicetree/bindings/riscv/extensions.yaml |   7 +
 arch/riscv/boot/dts/renesas/r9a07g043f.dtsi   |   4 +-
 arch/riscv/errata/andes/errata.c              |  10 +-
 arch/riscv/include/asm/errata_list.h          |  13 +-
 arch/riscv/include/asm/hwcap.h                |   1 +
 arch/riscv/include/asm/vendorid_list.h        |   2 +-
 arch/riscv/kernel/alternative.c               |   2 +-
 arch/riscv/kernel/cpufeature.c                |   1 +
 drivers/irqchip/irq-riscv-intc.c              |  82 +++++++++--
 drivers/perf/Kconfig                          |  14 ++
 drivers/perf/riscv_pmu_sbi.c                  |  37 ++++-
 include/linux/soc/andes/irq.h                 |  18 +++
 .../arch/riscv/andes/ax45/firmware.json       |  68 ++++++++++
 .../arch/riscv/andes/ax45/instructions.json   | 127 ++++++++++++++++++
 .../arch/riscv/andes/ax45/memory.json         |  57 ++++++++
 .../arch/riscv/andes/ax45/microarch.json      |  77 +++++++++++
 tools/perf/pmu-events/arch/riscv/mapfile.csv  |   1 +
 18 files changed, 488 insertions(+), 39 deletions(-)
 create mode 100644 include/linux/soc/andes/irq.h
 create mode 100644 tools/perf/pmu-events/arch/riscv/andes/ax45/firmware.json
 create mode 100644 tools/perf/pmu-events/arch/riscv/andes/ax45/instructions.json
 create mode 100644 tools/perf/pmu-events/arch/riscv/andes/ax45/memory.json
 create mode 100644 tools/perf/pmu-events/arch/riscv/andes/ax45/microarch.json
Signature · 1 line
2.34.1
#1 lore raw

PATCH v9 1/10 riscv: errata: Rename defines for Andes

Use "ANDES" rather than "ANDESTECH" to unify the naming convention with directory, file names, Kconfig options and other definitions.

---
Changes v1 -> v2:
- No change
Changes v2 -> v3:
- Rewrite commit message (suggested by Conor)
Changes v3 -> v4:
- Include Conor's Acked-by tag
Changes v4 -> v5:
- Include Prabhakar's RB tag
Changes v5 -> v6:
- No change
Changes v6 -> v7:
- No change
Changes v7 -> v8:
- No change
Changes v8 -> v9:
- No change

---
 arch/riscv/errata/andes/errata.c       | 10 +++++-----
 arch/riscv/include/asm/errata_list.h   |  4 ++--
 arch/riscv/include/asm/vendorid_list.h |  2 +-
 arch/riscv/kernel/alternative.c        |  2 +-
 4 files changed, 9 insertions(+), 9 deletions(-)
arch/riscv/errata/andes/errata.c +5 -5
index 17a904869724..f2708a9494a1 100644
@@ -18,9 +18,9 @@
 #include <asm/sbi.h>
 #include <asm/vendorid_list.h>
 
-#define ANDESTECH_AX45MP_MARCHID	0x8000000000008a45UL
-#define ANDESTECH_AX45MP_MIMPID		0x500UL
-#define ANDESTECH_SBI_EXT_ANDES		0x0900031E
+#define ANDES_AX45MP_MARCHID		0x8000000000008a45UL
+#define ANDES_AX45MP_MIMPID		0x500UL
+#define ANDES_SBI_EXT_ANDES		0x0900031E
 
 #define ANDES_SBI_EXT_IOCP_SW_WORKAROUND	1
 
@@ -32,7 +32,7 @@ static long ax45mp_iocp_sw_workaround(void)
 	 * ANDES_SBI_EXT_IOCP_SW_WORKAROUND SBI EXT checks if the IOCP is missing and
 	 * cache is controllable only then CMO will be applied to the platform.
 	 */
-	ret = sbi_ecall(ANDESTECH_SBI_EXT_ANDES, ANDES_SBI_EXT_IOCP_SW_WORKAROUND,
+	ret = sbi_ecall(ANDES_SBI_EXT_ANDES, ANDES_SBI_EXT_IOCP_SW_WORKAROUND,
 			0, 0, 0, 0, 0, 0);
 
 	return ret.error ? 0 : ret.value;
@@ -50,7 +50,7 @@ static void errata_probe_iocp(unsigned int stage, unsigned long arch_id, unsigne
 
 	done = true;
 
-	if (arch_id != ANDESTECH_AX45MP_MARCHID || impid != ANDESTECH_AX45MP_MIMPID)
+	if (arch_id != ANDES_AX45MP_MARCHID || impid != ANDES_AX45MP_MIMPID)
 		return;
 
 	if (!ax45mp_iocp_sw_workaround())
arch/riscv/include/asm/errata_list.h +2 -2
index ea33288f8a25..96025eec5631 100644
@@ -12,8 +12,8 @@
 #include <asm/vendorid_list.h>
 
 #ifdef CONFIG_ERRATA_ANDES
-#define ERRATA_ANDESTECH_NO_IOCP	0
-#define ERRATA_ANDESTECH_NUMBER		1
+#define ERRATA_ANDES_NO_IOCP 0
+#define ERRATA_ANDES_NUMBER 1
 #endif
 
 #ifdef CONFIG_ERRATA_SIFIVE
arch/riscv/include/asm/vendorid_list.h +1 -1
index e55407ace0c3..2f2bb0c84f9a 100644
@@ -5,7 +5,7 @@
 #ifndef ASM_VENDOR_LIST_H
 #define ASM_VENDOR_LIST_H
 
-#define ANDESTECH_VENDOR_ID	0x31e
+#define ANDES_VENDOR_ID		0x31e
 #define SIFIVE_VENDOR_ID	0x489
 #define THEAD_VENDOR_ID		0x5b7
 
arch/riscv/kernel/alternative.c +1 -1
index 319a1da0358b..0128b161bfda 100644
@@ -43,7 +43,7 @@ static void riscv_fill_cpu_mfr_info(struct cpu_manufacturer_info_t *cpu_mfr_info
 
 	switch (cpu_mfr_info->vendor_id) {
 #ifdef CONFIG_ERRATA_ANDES
-	case ANDESTECH_VENDOR_ID:
+	case ANDES_VENDOR_ID:
 		cpu_mfr_info->patch_func = andes_errata_patch_func;
 		break;
 #endif
Signature · 1 line
2.34.1
#2 lore raw

PATCH v9 2/10 irqchip/riscv-intc: Allow large non-standard interrupt number

In reply to Yu Chien Peter Lin

Currently, the implementation of the RISC-V INTC driver uses the interrupt cause as the hardware interrupt number, with a maximum of 64 interrupts. However, the platform can expand the interrupt number further for custom local interrupts.

To fully utilize the available local interrupt sources, switch to using irq_domain_create_tree() that creates the radix tree map, add global variables (riscv_intc_nr_irqs, riscv_intc_custom_base and riscv_intc_custom_nr_irqs) to determine the valid range of local interrupt number (hwirq).

---
Changes v1 -> v2:
- Fixed irq mapping failure checking (suggested by Clément and Anup)
Changes v2 -> v3:
- No change
Changes v3 -> v4: (Suggested by Thomas [1])
- Use pr_warn_ratelimited instead
- Fix coding style and commit message
Changes v4 -> v5: (Suggested by Thomas)
- Fix commit message
Changes v5 -> v6: (Suggested by Anup [2])
- Add riscv_intc_* global variables for checking the range of valid interrupt number in riscv_intc_domain_alloc()
- Advertise the number of interrupts allowed
Changes v6 -> v7:
- No functional change
Changes v7 -> v8:
- Include Reviewed-by tags from Anup and Atish
Changes v8 -> v9 (Suggested by Thomas [3]):
- Fix coding style
- Update hwirq range checks
- Update riscv_intc_* global variables initialization

[1] https://patchwork.kernel.org/project/linux-riscv/patch/[email protected]/#25573085
[2] https://patchwork.kernel.org/project/linux-riscv/patch/[email protected]/#25636589
[3] https://patchwork.kernel.org/project/linux-riscv/patch/[email protected]/#25710584

---
 drivers/irqchip/irq-riscv-intc.c | 26 +++++++++++++++++++-------
 1 file changed, 19 insertions(+), 7 deletions(-)
drivers/irqchip/irq-riscv-intc.c +19 -7
index e8d01b14ccdd..684875c39728 100644
@@ -19,15 +19,16 @@
 #include <linux/smp.h>
 
 static struct irq_domain *intc_domain;
+static unsigned int riscv_intc_nr_irqs __ro_after_init = BITS_PER_LONG;
+static unsigned int riscv_intc_custom_base __ro_after_init = BITS_PER_LONG;
+static unsigned int riscv_intc_custom_nr_irqs __ro_after_init;
 
 static asmlinkage void riscv_intc_irq(struct pt_regs *regs)
 {
 	unsigned long cause = regs->cause & ~CAUSE_IRQ_FLAG;
 
-	if (unlikely(cause >= BITS_PER_LONG))
-		panic("unexpected interrupt cause");
-
-	generic_handle_domain_irq(intc_domain, cause);
+	if (generic_handle_domain_irq(intc_domain, cause))
+		pr_warn_ratelimited("Failed to handle interrupt (cause: %ld)\n", cause);
 }
 
 /*
@@ -93,6 +94,14 @@ static int riscv_intc_domain_alloc(struct irq_domain *domain,
 	if (ret)
 		return ret;
 
+	/*
+	 * Only allow hwirq for which we have corresponding standard or
+	 * custom interrupt enable register.
+	 */
+	if ((hwirq >= riscv_intc_nr_irqs && hwirq < riscv_intc_custom_base) ||
+	    (hwirq >= riscv_intc_custom_base + riscv_intc_custom_nr_irqs))
+		return -EINVAL;
+
 	for (i = 0; i < nr_irqs; i++) {
 		ret = riscv_intc_domain_map(domain, virq + i, hwirq + i);
 		if (ret)
@@ -117,8 +126,7 @@ static int __init riscv_intc_init_common(struct fwnode_handle *fn)
 {
 	int rc;
 
-	intc_domain = irq_domain_create_linear(fn, BITS_PER_LONG,
-					       &riscv_intc_domain_ops, NULL);
+	intc_domain = irq_domain_create_tree(fn, &riscv_intc_domain_ops, NULL);
 	if (!intc_domain) {
 		pr_err("unable to add IRQ domain\n");
 		return -ENXIO;
@@ -132,7 +140,11 @@ static int __init riscv_intc_init_common(struct fwnode_handle *fn)
 
 	riscv_set_intc_hwnode_fn(riscv_intc_hwnode);
 
-	pr_info("%d local interrupts mapped\n", BITS_PER_LONG);
+	pr_info("%d local interrupts mapped\n", riscv_intc_nr_irqs);
+	if (riscv_intc_custom_nr_irqs) {
+		pr_info("%d custom local interrupts mapped\n",
+			riscv_intc_custom_nr_irqs);
+	}
 
 	return 0;
 }
Signature · 1 line
2.34.1
Reviewed-by on v9 2/10
#3 lore raw

Re: [PATCH v9 02/10] irqchip/riscv-intc: Allow large non-standard interrupt number

Quoted 11 lines · Yu Chien Peter Lin

Currently, the implementation of the RISC-V INTC driver uses the interrupt cause as the hardware interrupt number, with a maximum of 64 interrupts. However, the platform can expand the interrupt number further for custom local interrupts.

To fully utilize the available local interrupt sources, switch to using irq_domain_create_tree() that creates the radix tree map, add global variables (riscv_intc_nr_irqs, riscv_intc_custom_base and riscv_intc_custom_nr_irqs) to determine the valid range of local interrupt number (hwirq).

Quoted 4 lines
#4 lore raw

[tip: irq/msi] irqchip/riscv-intc: Allow large non-standard interrupt number

In reply to Yu Chien Peter Lin
The following commit has been merged into the irq/msi branch of tip:

The following commit has been merged into the irq/msi branch of tip:

Commit-ID:     96303bcb401c21dc1426d8d9bb1fc74aae5c02a9
Gitweb:        https://git.kernel.org/tip/96303bcb401c21dc1426d8d9bb1fc74aae5c02a9
Author:        Yu Chien Peter Lin <[email protected]>
AuthorDate:    Thu, 22 Feb 2024 16:39:38 +08:00
Committer:     Thomas Gleixner <[email protected]>
CommitterDate: Fri, 23 Feb 2024 09:57:42 +01:00

irqchip/riscv-intc: Allow large non-standard interrupt number

Currently, the implementation of the RISC-V INTC driver uses the interrupt cause as the hardware interrupt number, with a maximum of 64 interrupts. However, the platform can expand the interrupt number further for custom local interrupts.

To fully utilize the available local interrupt sources, switch to using irq_domain_create_tree() that creates the radix tree map, add global variables (riscv_intc_nr_irqs, riscv_intc_custom_base and riscv_intc_custom_nr_irqs) to determine the valid range of local interrupt number (hwirq).

---
 drivers/irqchip/irq-riscv-intc.c | 26 +++++++++++++++++++-------
 1 file changed, 19 insertions(+), 7 deletions(-)
drivers/irqchip/irq-riscv-intc.c +19 -7
index e8d01b1..684875c 100644
@@ -19,15 +19,16 @@
 #include <linux/smp.h>
 
 static struct irq_domain *intc_domain;
+static unsigned int riscv_intc_nr_irqs __ro_after_init = BITS_PER_LONG;
+static unsigned int riscv_intc_custom_base __ro_after_init = BITS_PER_LONG;
+static unsigned int riscv_intc_custom_nr_irqs __ro_after_init;
 
 static asmlinkage void riscv_intc_irq(struct pt_regs *regs)
 {
 	unsigned long cause = regs->cause & ~CAUSE_IRQ_FLAG;
 
-	if (unlikely(cause >= BITS_PER_LONG))
-		panic("unexpected interrupt cause");
-
-	generic_handle_domain_irq(intc_domain, cause);
+	if (generic_handle_domain_irq(intc_domain, cause))
+		pr_warn_ratelimited("Failed to handle interrupt (cause: %ld)\n", cause);
 }
 
 /*
@@ -93,6 +94,14 @@ static int riscv_intc_domain_alloc(struct irq_domain *domain,
 	if (ret)
 		return ret;
 
+	/*
+	 * Only allow hwirq for which we have corresponding standard or
+	 * custom interrupt enable register.
+	 */
+	if ((hwirq >= riscv_intc_nr_irqs && hwirq < riscv_intc_custom_base) ||
+	    (hwirq >= riscv_intc_custom_base + riscv_intc_custom_nr_irqs))
+		return -EINVAL;
+
 	for (i = 0; i < nr_irqs; i++) {
 		ret = riscv_intc_domain_map(domain, virq + i, hwirq + i);
 		if (ret)
@@ -117,8 +126,7 @@ static int __init riscv_intc_init_common(struct fwnode_handle *fn)
 {
 	int rc;
 
-	intc_domain = irq_domain_create_linear(fn, BITS_PER_LONG,
-					       &riscv_intc_domain_ops, NULL);
+	intc_domain = irq_domain_create_tree(fn, &riscv_intc_domain_ops, NULL);
 	if (!intc_domain) {
 		pr_err("unable to add IRQ domain\n");
 		return -ENXIO;
@@ -132,7 +140,11 @@ static int __init riscv_intc_init_common(struct fwnode_handle *fn)
 
 	riscv_set_intc_hwnode_fn(riscv_intc_hwnode);
 
-	pr_info("%d local interrupts mapped\n", BITS_PER_LONG);
+	pr_info("%d local interrupts mapped\n", riscv_intc_nr_irqs);
+	if (riscv_intc_custom_nr_irqs) {
+		pr_info("%d custom local interrupts mapped\n",
+			riscv_intc_custom_nr_irqs);
+	}
 
 	return 0;
 }
#5 lore raw

PATCH v9 3/10 irqchip/riscv-intc: Introduce Andes hart-level interrupt controller

In reply to Yu Chien Peter Lin

Add support for the Andes hart-level interrupt controller. This controller provides interrupt mask/unmask functions to access the custom register (SLIE) where the non-standard S-mode local interrupt enable bits are located. The base of custom interrupt number is set to 256.

To share the riscv_intc_domain_map() with the generic RISC-V INTC and ACPI, add a chip parameter to riscv_intc_init_common(), so it can be passed to the irq_domain_set_info() as a private data.

Andes hart-level interrupt controller requires the "andestech,cpu-intc" compatible string to be present in interrupt-controller of cpu node to enable the use of custom local interrupt source.
e.g.,

  cpu0: cpu@0 {
      compatible = "andestech,ax45mp", "riscv";
      ...
      cpu0-intc: interrupt-controller {
          #interrupt-cells = <0x01>;
          compatible = "andestech,cpu-intc", "riscv,cpu-intc";
          interrupt-controller;
      };
  };

---
Changes v1 -> v2:
- New patch
Changes v2 -> v3:
- Return -ENXIO if no valid compatible INTC found
- Allow falling back to generic RISC-V INTC
Changes v3 -> v4: (Suggested by Thomas [1])
- Add comment to andes irq chip function
- Refine code flow to share with generic RISC-V INTC and ACPI
- Move Andes specific definitions to include/linux/soc/andes/irq.h
Changes v4 -> v5: (Suggested by Thomas)
- Fix commit message
- Subtract ANDES_SLI_CAUSE_BASE from d->hwirq to calculate the value of mask
- Do not set chip_data to the chip itself with irq_domain_set_info()
- Follow reverse fir tree order variable declarations
Changes v5 -> v6:
- To follow the naming on datasheet, rename ANDES_RV_IRQ_PMU to ANDES_RV_IRQ_PMOVI
- Initialize the riscv_intc_* global variables for Andes INTC (Suggested by Anup)
- Use BITS_PER_LONG to compute the bit mask of SIE/SLIE as they are 64-bit registers (32-bit for RV32)
Changes v6 -> v7:
- No change
Changes v7 -> v8:
- Include Reviewed-by tags from Anup
Changes v8 -> v9:
- No functional change

[1] https://patchwork.kernel.org/project/linux-riscv/patch/[email protected]/

---
 drivers/irqchip/irq-riscv-intc.c | 58 ++++++++++++++++++++++++++++----
 include/linux/soc/andes/irq.h    | 18 ++++++++++
 2 files changed, 69 insertions(+), 7 deletions(-)
 create mode 100644 include/linux/soc/andes/irq.h
drivers/irqchip/irq-riscv-intc.c +51 -7
index 684875c39728..0cd6b48a5dbf 100644
@@ -17,6 +17,7 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/smp.h>
+#include <linux/soc/andes/irq.h>
 
 static struct irq_domain *intc_domain;
 static unsigned int riscv_intc_nr_irqs __ro_after_init = BITS_PER_LONG;
@@ -48,6 +49,31 @@ static void riscv_intc_irq_unmask(struct irq_data *d)
 	csr_set(CSR_IE, BIT(d->hwirq));
 }
 
+static void andes_intc_irq_mask(struct irq_data *d)
+{
+	/*
+	 * Andes specific S-mode local interrupt causes (hwirq)
+	 * are defined as (256 + n) and controlled by n-th bit
+	 * of SLIE.
+	 */
+	unsigned int mask = BIT(d->hwirq % BITS_PER_LONG);
+
+	if (d->hwirq < ANDES_SLI_CAUSE_BASE)
+		csr_clear(CSR_IE, mask);
+	else
+		csr_clear(ANDES_CSR_SLIE, mask);
+}
+
+static void andes_intc_irq_unmask(struct irq_data *d)
+{
+	unsigned int mask = BIT(d->hwirq % BITS_PER_LONG);
+
+	if (d->hwirq < ANDES_SLI_CAUSE_BASE)
+		csr_set(CSR_IE, mask);
+	else
+		csr_set(ANDES_CSR_SLIE, mask);
+}
+
 static void riscv_intc_irq_eoi(struct irq_data *d)
 {
 	/*
@@ -71,12 +97,21 @@ static struct irq_chip riscv_intc_chip = {
 	.irq_eoi = riscv_intc_irq_eoi,
 };
 
+static struct irq_chip andes_intc_chip = {
+	.name		= "RISC-V INTC",
+	.irq_mask	= andes_intc_irq_mask,
+	.irq_unmask	= andes_intc_irq_unmask,
+	.irq_eoi	= riscv_intc_irq_eoi,
+};
+
 static int riscv_intc_domain_map(struct irq_domain *d, unsigned int irq,
 				 irq_hw_number_t hwirq)
 {
+	struct irq_chip *chip = d->host_data;
+
 	irq_set_percpu_devid(irq);
-	irq_domain_set_info(d, irq, hwirq, &riscv_intc_chip, d->host_data,
-			    handle_percpu_devid_irq, NULL, NULL);
+	irq_domain_set_info(d, irq, hwirq, chip, NULL, handle_percpu_devid_irq,
+			    NULL, NULL);
 
 	return 0;
 }
@@ -122,11 +157,12 @@ static struct fwnode_handle *riscv_intc_hwnode(void)
 	return intc_domain->fwnode;
 }
 
-static int __init riscv_intc_init_common(struct fwnode_handle *fn)
+static int __init riscv_intc_init_common(struct fwnode_handle *fn,
+					 struct irq_chip *chip)
 {
 	int rc;
 
-	intc_domain = irq_domain_create_tree(fn, &riscv_intc_domain_ops, NULL);
+	intc_domain = irq_domain_create_tree(fn, &riscv_intc_domain_ops, chip);
 	if (!intc_domain) {
 		pr_err("unable to add IRQ domain\n");
 		return -ENXIO;
@@ -152,8 +188,9 @@ static int __init riscv_intc_init_common(struct fwnode_handle *fn)
 static int __init riscv_intc_init(struct device_node *node,
 				  struct device_node *parent)
 {
-	int rc;
+	struct irq_chip *chip = &riscv_intc_chip;
 	unsigned long hartid;
+	int rc;
 
 	rc = riscv_of_parent_hartid(node, &hartid);
 	if (rc < 0) {
@@ -178,10 +215,17 @@ static int __init riscv_intc_init(struct device_node *node,
 		return 0;
 	}
 
-	return riscv_intc_init_common(of_node_to_fwnode(node));
+	if (of_device_is_compatible(node, "andestech,cpu-intc")) {
+		riscv_intc_custom_base = ANDES_SLI_CAUSE_BASE;
+		riscv_intc_custom_nr_irqs = ANDES_RV_IRQ_LAST;
+		chip = &andes_intc_chip;
+	}
+
+	return riscv_intc_init_common(of_node_to_fwnode(node), chip);
 }
 
 IRQCHIP_DECLARE(riscv, "riscv,cpu-intc", riscv_intc_init);
+IRQCHIP_DECLARE(andes, "andestech,cpu-intc", riscv_intc_init);
 
 #ifdef CONFIG_ACPI
 
@@ -208,7 +252,7 @@ static int __init riscv_intc_acpi_init(union acpi_subtable_headers *header,
 		return -ENOMEM;
 	}
 
-	return riscv_intc_init_common(fn);
+	return riscv_intc_init_common(fn, &riscv_intc_chip);
 }
 
 IRQCHIP_ACPI_DECLARE(riscv_intc, ACPI_MADT_TYPE_RINTC, NULL,
include/linux/soc/andes/irq.h new file +18 -0
new file mode 100644
index 000000000000..edc3182d6e66
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2023 Andes Technology Corporation
+ */
+#ifndef __ANDES_IRQ_H
+#define __ANDES_IRQ_H
+
+/* Andes PMU irq number */
+#define ANDES_RV_IRQ_PMOVI		18
+#define ANDES_RV_IRQ_LAST		ANDES_RV_IRQ_PMOVI
+#define ANDES_SLI_CAUSE_BASE		256
+
+/* Andes PMU related registers */
+#define ANDES_CSR_SLIE			0x9c4
+#define ANDES_CSR_SLIP			0x9c5
+#define ANDES_CSR_SCOUNTEROF		0x9d4
+
+#endif /* __ANDES_IRQ_H */
Signature · 1 line
2.34.1
Reviewed-by on v9 3/10
#6 lore raw

Re: [PATCH v9 03/10] irqchip/riscv-intc: Introduce Andes hart-level interrupt controller

Quoted 25 lines · Yu Chien Peter Lin

Add support for the Andes hart-level interrupt controller. This controller provides interrupt mask/unmask functions to access the custom register (SLIE) where the non-standard S-mode local interrupt enable bits are located. The base of custom interrupt number is set to 256.

To share the riscv_intc_domain_map() with the generic RISC-V INTC and ACPI, add a chip parameter to riscv_intc_init_common(), so it can be passed to the irq_domain_set_info() as a private data.

Andes hart-level interrupt controller requires the "andestech,cpu-intc" compatible string to be present in interrupt-controller of cpu node to enable the use of custom local interrupt source.
e.g.,

  cpu0: cpu@0 {
      compatible = "andestech,ax45mp", "riscv";
      ...
      cpu0-intc: interrupt-controller {
          #interrupt-cells = <0x01>;
          compatible = "andestech,cpu-intc", "riscv,cpu-intc";
          interrupt-controller;
      };
  };
Quoted 3 lines

Palmer, feel free to take this through the riscv tree. I have no other changes pending against that driver.

Thanks,

tglx

#7 lore raw

Re: [PATCH v9 03/10] irqchip/riscv-intc: Introduce Andes hart-level interrupt controller

Quoted 2 lines · Thomas Gleixner

Palmer, feel free to take this through the riscv tree. I have no other changes pending against that driver.

Aargh. Spoken too early. This conflicts with Anups AIA series.

https://lore.kernel.org/all/[email protected]

So I rather take the pile through my tree and deal with the conflicts localy than inflicting it on next.

Palmer?

Thanks,

tglx

#8 lore raw

Re: [PATCH v9 03/10] irqchip/riscv-intc: Introduce Andes hart-level interrupt controller

Quoted 4 lines · Thomas Gleixner
Quoted 2 lines · Thomas Gleixner

Palmer, feel free to take this through the riscv tree. I have no other changes pending against that driver.

Quoted 8 lines

Aargh. Spoken too early. This conflicts with Anups AIA series.

https://lore.kernel.org/all/[email protected]

So I rather take the pile through my tree and deal with the conflicts localy than inflicting it on next.

Palmer?

Nah. I just apply the two intc patches localy and give you a tag to pull from so we carry both the same commits. Then I can deal with the conflicts on my side trivially.

Thanks,

tglx

#9 lore raw

Re: [PATCH v9 03/10] irqchip/riscv-intc: Introduce Andes hart-level interrupt controller

Quoted 9 lines · Thomas Gleixner
Quoted 8 lines · Thomas Gleixner
Quoted 2 lines · Thomas Gleixner

Palmer, feel free to take this through the riscv tree. I have no other changes pending against that driver.

Aargh. Spoken too early. This conflicts with Anups AIA series.

https://lore.kernel.org/all/[email protected]

Quoted 8 lines
Quoted 4 lines

So I rather take the pile through my tree and deal with the conflicts localy than inflicting it on next.

Palmer?

Nah. I just apply the two intc patches localy and give you a tag to pull from so we carry both the same commits. Then I can deal with the conflicts on my side trivially.

Here you go:

git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq-for-riscv-02-23-24

Contains:

f4cc33e78ba8 ("irqchip/riscv-intc: Introduce Andes hart-level interrupt controller") 96303bcb401c ("irqchip/riscv-intc: Allow large non-standard interrupt number")

on top of v6.8-rc1

Thanks,

tglx

maintainer
#10 lore raw

Re: [PATCH v9 03/10] irqchip/riscv-intc: Introduce Andes hart-level interrupt controller

Quoted 21 lines · On Fri, 23 Feb 2024 01:06:44 PST (-0800), [email protected] wrote:
Quoted 9 lines · Thomas Gleixner
Quoted 8 lines · Thomas Gleixner
Quoted 2 lines · Thomas Gleixner

Palmer, feel free to take this through the riscv tree. I have no other changes pending against that driver.

Aargh. Spoken too early. This conflicts with Anups AIA series.

https://lore.kernel.org/all/[email protected]

Quoted 8 lines
Quoted 4 lines

So I rather take the pile through my tree and deal with the conflicts localy than inflicting it on next.

Palmer?

Nah. I just apply the two intc patches localy and give you a tag to pull from so we carry both the same commits. Then I can deal with the conflicts on my side trivially.

Here you go:

Quoted 8 lines

git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq-for-riscv-02-23-24

Contains:

f4cc33e78ba8 ("irqchip/riscv-intc: Introduce Andes hart-level interrupt controller") 96303bcb401c ("irqchip/riscv-intc: Allow large non-standard interrupt number")

on top of v6.8-rc1

Sorry I missed this. I just merged this into my testing tree, it might take a bit to show up because I've managed to break my VPN so I can't poke the tester box right now...

Quoted 4 lines

Thanks,

tglx

#11 lore raw

Re: [PATCH v9 03/10] irqchip/riscv-intc: Introduce Andes hart-level interrupt controller

Quoted 11 lines · Palmer Dabbelt
Quoted 6 lines · On Fri, 23 Feb 2024 01:06:44 PST (-0800), [email protected] wrote:

Contains:

f4cc33e78ba8 ("irqchip/riscv-intc: Introduce Andes hart-level interrupt controller") 96303bcb401c ("irqchip/riscv-intc: Allow large non-standard interrupt number")

on top of v6.8-rc1

Sorry I missed this. I just merged this into my testing tree, it might take a bit to show up because I've managed to break my VPN so I can't poke the tester box right now...

Alternatively you can just rebase on Linus tree. The interrupt changes are already merged.

#12 lore raw

[tip: irq/msi] irqchip/riscv-intc: Introduce Andes hart-level interrupt controller

In reply to Yu Chien Peter Lin
The following commit has been merged into the irq/msi branch of tip:

The following commit has been merged into the irq/msi branch of tip:

Commit-ID:     f4cc33e78ba8624a79ba8dea98ce5c85aa9ca33c
Gitweb:        https://git.kernel.org/tip/f4cc33e78ba8624a79ba8dea98ce5c85aa9ca33c
Author:        Yu Chien Peter Lin <[email protected]>
AuthorDate:    Thu, 22 Feb 2024 16:39:39 +08:00
Committer:     Thomas Gleixner <[email protected]>
CommitterDate: Fri, 23 Feb 2024 09:57:42 +01:00

irqchip/riscv-intc: Introduce Andes hart-level interrupt controller

Add support for the Andes hart-level interrupt controller. This controller provides interrupt mask/unmask functions to access the custom register (SLIE) where the non-standard S-mode local interrupt enable bits are located. The base of custom interrupt number is set to 256.

To share the riscv_intc_domain_map() with the generic RISC-V INTC and ACPI, add a chip parameter to riscv_intc_init_common(), so it can be passed to the irq_domain_set_info() as a private data.

Andes hart-level interrupt controller requires the "andestech,cpu-intc" compatible string to be present in interrupt-controller of cpu node to enable the use of custom local interrupt source.
e.g.,

  cpu0: cpu@0 {
      compatible = "andestech,ax45mp", "riscv";
      ...
      cpu0-intc: interrupt-controller {
          #interrupt-cells = <0x01>;
          compatible = "andestech,cpu-intc", "riscv,cpu-intc";
          interrupt-controller;
      };
  };
---
 drivers/irqchip/irq-riscv-intc.c | 58 +++++++++++++++++++++++++++----
 include/linux/soc/andes/irq.h    | 18 ++++++++++-
 2 files changed, 69 insertions(+), 7 deletions(-)
 create mode 100644 include/linux/soc/andes/irq.h
drivers/irqchip/irq-riscv-intc.c +51 -7
index 684875c..0cd6b48 100644
@@ -17,6 +17,7 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/smp.h>
+#include <linux/soc/andes/irq.h>
 
 static struct irq_domain *intc_domain;
 static unsigned int riscv_intc_nr_irqs __ro_after_init = BITS_PER_LONG;
@@ -48,6 +49,31 @@ static void riscv_intc_irq_unmask(struct irq_data *d)
 	csr_set(CSR_IE, BIT(d->hwirq));
 }
 
+static void andes_intc_irq_mask(struct irq_data *d)
+{
+	/*
+	 * Andes specific S-mode local interrupt causes (hwirq)
+	 * are defined as (256 + n) and controlled by n-th bit
+	 * of SLIE.
+	 */
+	unsigned int mask = BIT(d->hwirq % BITS_PER_LONG);
+
+	if (d->hwirq < ANDES_SLI_CAUSE_BASE)
+		csr_clear(CSR_IE, mask);
+	else
+		csr_clear(ANDES_CSR_SLIE, mask);
+}
+
+static void andes_intc_irq_unmask(struct irq_data *d)
+{
+	unsigned int mask = BIT(d->hwirq % BITS_PER_LONG);
+
+	if (d->hwirq < ANDES_SLI_CAUSE_BASE)
+		csr_set(CSR_IE, mask);
+	else
+		csr_set(ANDES_CSR_SLIE, mask);
+}
+
 static void riscv_intc_irq_eoi(struct irq_data *d)
 {
 	/*
@@ -71,12 +97,21 @@ static struct irq_chip riscv_intc_chip = {
 	.irq_eoi = riscv_intc_irq_eoi,
 };
 
+static struct irq_chip andes_intc_chip = {
+	.name		= "RISC-V INTC",
+	.irq_mask	= andes_intc_irq_mask,
+	.irq_unmask	= andes_intc_irq_unmask,
+	.irq_eoi	= riscv_intc_irq_eoi,
+};
+
 static int riscv_intc_domain_map(struct irq_domain *d, unsigned int irq,
 				 irq_hw_number_t hwirq)
 {
+	struct irq_chip *chip = d->host_data;
+
 	irq_set_percpu_devid(irq);
-	irq_domain_set_info(d, irq, hwirq, &riscv_intc_chip, d->host_data,
-			    handle_percpu_devid_irq, NULL, NULL);
+	irq_domain_set_info(d, irq, hwirq, chip, NULL, handle_percpu_devid_irq,
+			    NULL, NULL);
 
 	return 0;
 }
@@ -122,11 +157,12 @@ static struct fwnode_handle *riscv_intc_hwnode(void)
 	return intc_domain->fwnode;
 }
 
-static int __init riscv_intc_init_common(struct fwnode_handle *fn)
+static int __init riscv_intc_init_common(struct fwnode_handle *fn,
+					 struct irq_chip *chip)
 {
 	int rc;
 
-	intc_domain = irq_domain_create_tree(fn, &riscv_intc_domain_ops, NULL);
+	intc_domain = irq_domain_create_tree(fn, &riscv_intc_domain_ops, chip);
 	if (!intc_domain) {
 		pr_err("unable to add IRQ domain\n");
 		return -ENXIO;
@@ -152,8 +188,9 @@ static int __init riscv_intc_init_common(struct fwnode_handle *fn)
 static int __init riscv_intc_init(struct device_node *node,
 				  struct device_node *parent)
 {
-	int rc;
+	struct irq_chip *chip = &riscv_intc_chip;
 	unsigned long hartid;
+	int rc;
 
 	rc = riscv_of_parent_hartid(node, &hartid);
 	if (rc < 0) {
@@ -178,10 +215,17 @@ static int __init riscv_intc_init(struct device_node *node,
 		return 0;
 	}
 
-	return riscv_intc_init_common(of_node_to_fwnode(node));
+	if (of_device_is_compatible(node, "andestech,cpu-intc")) {
+		riscv_intc_custom_base = ANDES_SLI_CAUSE_BASE;
+		riscv_intc_custom_nr_irqs = ANDES_RV_IRQ_LAST;
+		chip = &andes_intc_chip;
+	}
+
+	return riscv_intc_init_common(of_node_to_fwnode(node), chip);
 }
 
 IRQCHIP_DECLARE(riscv, "riscv,cpu-intc", riscv_intc_init);
+IRQCHIP_DECLARE(andes, "andestech,cpu-intc", riscv_intc_init);
 
 #ifdef CONFIG_ACPI
 
@@ -208,7 +252,7 @@ static int __init riscv_intc_acpi_init(union acpi_subtable_headers *header,
 		return -ENOMEM;
 	}
 
-	return riscv_intc_init_common(fn);
+	return riscv_intc_init_common(fn, &riscv_intc_chip);
 }
 
 IRQCHIP_ACPI_DECLARE(riscv_intc, ACPI_MADT_TYPE_RINTC, NULL,
include/linux/soc/andes/irq.h new file +18 -0
new file mode 100644
index 0000000..edc3182
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2023 Andes Technology Corporation
+ */
+#ifndef __ANDES_IRQ_H
+#define __ANDES_IRQ_H
+
+/* Andes PMU irq number */
+#define ANDES_RV_IRQ_PMOVI		18
+#define ANDES_RV_IRQ_LAST		ANDES_RV_IRQ_PMOVI
+#define ANDES_SLI_CAUSE_BASE		256
+
+/* Andes PMU related registers */
+#define ANDES_CSR_SLIE			0x9c4
+#define ANDES_CSR_SLIP			0x9c5
+#define ANDES_CSR_SCOUNTEROF		0x9d4
+
+#endif /* __ANDES_IRQ_H */
#13 lore raw

PATCH v9 4/10 dt-bindings: riscv: Add Andes interrupt controller compatible string

In reply to Yu Chien Peter Lin

Add "andestech,cpu-intc" compatible string to indicate that Andes specific local interrupt is supported on the core, e.g. AX45MP cores have 3 types of non-standard local interrupt which can be handled in supervisor mode:

- Slave port ECC error interrupt
- Bus write transaction error interrupt
- Performance monitor overflow interrupt

These interrupts are enabled/disabled via a custom register SLIE instead of the standard interrupt enable register SIE.

---
Changes v1 -> v2:
- New patch
Changes v2 -> v3:
- Updated commit message
- Fixed possible compatibles for Andes INTC
Changes v3 -> v4:
- Add const entry instead of enum (Suggested by Conor)
Changes v4 -> v5:
- Include Conor's Acked-by
- Include Prabhakar's Reviewed-by
Changes v5 -> v6:
- No change
Changes v6 -> v7:
- No change
Changes v7 -> v8:
- No change
Changes v8 -> v9:
- No change

---
 Documentation/devicetree/bindings/riscv/cpus.yaml | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/riscv/cpus.yaml +5 -1
index 9d8670c00e3b..6ccd75cbbc59 100644
@@ -106,7 +106,11 @@ properties:
         const: 1
 
       compatible:
-        const: riscv,cpu-intc
+        oneOf:
+          - items:
+              - const: andestech,cpu-intc
+              - const: riscv,cpu-intc
+          - const: riscv,cpu-intc
 
       interrupt-controller: true
 
Signature · 1 line
2.34.1
#14 lore raw

PATCH v9 5/10 riscv: dts: renesas: r9a07g043f: Update compatible string to use Andes INTC

In reply to Yu Chien Peter Lin

The Andes hart-level interrupt controller (Andes INTC) allows AX45MP cores to handle custom local interrupts, such as the performance counter overflow interrupt.

---
Changes v1 -> v2:
- New patch
Changes v2 -> v3:
- Fixed possible compatibles for Andes INTC
Changes v3 -> v4:
- No change
Changes v4 -> v5:
- Include Geert's Reviewed-by
- Include Prabhakar's Reviewed/Tested-by
Changes v5 -> v6:
- No change
Changes v6 -> v7:
- No change
Changes v7 -> v8:
- No change
Changes v8 -> v9:
- No change

---
 arch/riscv/boot/dts/renesas/r9a07g043f.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/riscv/boot/dts/renesas/r9a07g043f.dtsi +1 -1
index a92cfcfc021b..099f3df75b42 100644
@@ -39,7 +39,7 @@ cpu0: cpu@0 {
 
 			cpu0_intc: interrupt-controller {
 				#interrupt-cells = <1>;
-				compatible = "riscv,cpu-intc";
+				compatible = "andestech,cpu-intc", "riscv,cpu-intc";
 				interrupt-controller;
 			};
 		};
Signature · 1 line
2.34.1
Acked-by on v9 5/10
#15 lore raw

Re: [PATCH v9 05/10] riscv: dts: renesas: r9a07g043f: Update compatible string to use Andes INTC

Quoted 18 lines · Yu Chien Peter Lin

The Andes hart-level interrupt controller (Andes INTC) allows AX45MP cores to handle custom local interrupts, such as the performance counter overflow interrupt.

---
Changes v1 -> v2:
- New patch
Changes v2 -> v3:
- Fixed possible compatibles for Andes INTC
Changes v3 -> v4:
- No change
Changes v4 -> v5:
- Include Geert's Reviewed-by
- Include Prabhakar's Reviewed/Tested-by

Quoted 8 lines

Changes v5 -> v6:
- No change
Changes v6 -> v7:
- No change
Changes v7 -> v8:
- No change
Changes v8 -> v9:
- No change

so Palmer can pick it up with the rest of the series (the Renesas tree imerge window for v6.9 has closed)

Gr{oetje,eeting}s,

Geert

Signature · 5 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
#16 lore raw

PATCH v9 6/10 perf: RISC-V: Eliminate redundant interrupt enable/disable operations

In reply to Yu Chien Peter Lin

The interrupt enable/disable operations are already performed by the IRQ chip functions riscv_intc_irq_unmask()/riscv_intc_irq_mask() during enable_percpu_irq()/disable_percpu_irq(). It can be done only once.

---
This patch allows us to drop unnecessary ALT_SBI_PMU_OVF_{DISABLE,ENABLE} in the initial PATCH3 [1].

[1] https://patchwork.kernel.org/project/linux-riscv/patch/[email protected]/

Changes v1 -> v2:
- New patch
Changes v2 -> v3:
- No change
Changes v3 -> v4:
- No change
Changes v4 -> v5:
- No change
Changes v5 -> v6:
- No change
Changes v6 -> v7:
- No change
Changes v7 -> v8:
- Include Reviewed-by tags from Atish
Changes v8 -> v9:
- No change

---
 drivers/perf/riscv_pmu_sbi.c | 2 --
 1 file changed, 2 deletions(-)
drivers/perf/riscv_pmu_sbi.c +0 -2
index 16acd4dcdb96..2edbc37abadf 100644
@@ -781,7 +781,6 @@ static int pmu_sbi_starting_cpu(unsigned int cpu, struct hlist_node *node)
 	if (riscv_pmu_use_irq) {
 		cpu_hw_evt->irq = riscv_pmu_irq;
 		csr_clear(CSR_IP, BIT(riscv_pmu_irq_num));
-		csr_set(CSR_IE, BIT(riscv_pmu_irq_num));
 		enable_percpu_irq(riscv_pmu_irq, IRQ_TYPE_NONE);
 	}
 
@@ -792,7 +791,6 @@ static int pmu_sbi_dying_cpu(unsigned int cpu, struct hlist_node *node)
 {
 	if (riscv_pmu_use_irq) {
 		disable_percpu_irq(riscv_pmu_irq);
-		csr_clear(CSR_IE, BIT(riscv_pmu_irq_num));
 	}
 
 	/* Disable all counters access for user mode now */
Signature · 1 line
2.34.1
#17 lore raw

PATCH v9 7/10 perf: RISC-V: Introduce Andes PMU to support perf event sampling

In reply to Yu Chien Peter Lin

Assign riscv_pmu_irq_num the value of (256 + 18) for the custome PMU and add SSCOUNTOVF and SIP alternatives to ALT_SBI_PMU_OVERFLOW() and ALT_SBI_PMU_OVF_CLEAR_PENDING() macros, respectively.

To make use of Andes PMU extension, "xandespmu" needs to be appended to the riscv,isa-extensions for each cpu node in device-tree, and make sure CONFIG_ANDES_CUSTOM_PMU is enabled.

---
Changes v1 -> v2:
- New patch
Changes v2 -> v3:
- Reordered list in riscv_isa_ext[]
- Removed mvendorid check in pmu_sbi_setup_irqs()
Changes v3 -> v4:
- No change
Changes v4 -> v5:
- Let ANDES_CUSTOM_PMU depend on ARCH_RENESAS
- Include Prabhakar's Reviewed/Tested-by
Changes v5 -> v6:
- No change
Changes v6 -> v7:
- No change
Changes v7 -> v8:
- No change
Changes v8 -> v9:
- No change

---
 arch/riscv/include/asm/errata_list.h |  9 -------
 arch/riscv/include/asm/hwcap.h       |  1 +
 arch/riscv/kernel/cpufeature.c       |  1 +
 drivers/perf/Kconfig                 | 14 +++++++++++
 drivers/perf/riscv_pmu_sbi.c         | 35 +++++++++++++++++++++++++---
 5 files changed, 48 insertions(+), 12 deletions(-)
arch/riscv/include/asm/errata_list.h +0 -9
index 96025eec5631..1f2dbfb8a8bf 100644
@@ -112,15 +112,6 @@ asm volatile(ALTERNATIVE(						\
 #define THEAD_C9XX_RV_IRQ_PMU			17
 #define THEAD_C9XX_CSR_SCOUNTEROF		0x5c5
 
-#define ALT_SBI_PMU_OVERFLOW(__ovl)					\
-asm volatile(ALTERNATIVE(						\
-	"csrr %0, " __stringify(CSR_SSCOUNTOVF),			\
-	"csrr %0, " __stringify(THEAD_C9XX_CSR_SCOUNTEROF),		\
-		THEAD_VENDOR_ID, ERRATA_THEAD_PMU,			\
-		CONFIG_ERRATA_THEAD_PMU)				\
-	: "=r" (__ovl) :						\
-	: "memory")
-
 #endif /* __ASSEMBLY__ */
 
 #endif
arch/riscv/include/asm/hwcap.h +1 -0
index 5340f818746b..bae7eac76c18 100644
@@ -80,6 +80,7 @@
 #define RISCV_ISA_EXT_ZFA		71
 #define RISCV_ISA_EXT_ZTSO		72
 #define RISCV_ISA_EXT_ZACAS		73
+#define RISCV_ISA_EXT_XANDESPMU		74
 
 #define RISCV_ISA_EXT_MAX		128
 #define RISCV_ISA_EXT_INVALID		U32_MAX
arch/riscv/kernel/cpufeature.c +1 -0
index 89920f84d0a3..0c7688fa8376 100644
@@ -307,6 +307,7 @@ const struct riscv_isa_ext_data riscv_isa_ext[] = {
 	__RISCV_ISA_EXT_DATA(svinval, RISCV_ISA_EXT_SVINVAL),
 	__RISCV_ISA_EXT_DATA(svnapot, RISCV_ISA_EXT_SVNAPOT),
 	__RISCV_ISA_EXT_DATA(svpbmt, RISCV_ISA_EXT_SVPBMT),
+	__RISCV_ISA_EXT_DATA(xandespmu, RISCV_ISA_EXT_XANDESPMU),
 };
 
 const size_t riscv_isa_ext_count = ARRAY_SIZE(riscv_isa_ext);
drivers/perf/Kconfig +14 -0
index ec6e0d9194a1..564e813d8c69 100644
@@ -86,6 +86,20 @@ config RISCV_PMU_SBI
 	  full perf feature support i.e. counter overflow, privilege mode
 	  filtering, counter configuration.
 
+config ANDES_CUSTOM_PMU
+	bool "Andes custom PMU support"
+	depends on ARCH_RENESAS && RISCV_ALTERNATIVE && RISCV_PMU_SBI
+	default y
+	help
+	  The Andes cores implement the PMU overflow extension very
+	  similar to the standard Sscofpmf and Smcntrpmf extension.
+
+	  This will patch the overflow and pending CSRs and handle the
+	  non-standard behaviour via the regular SBI PMU driver and
+	  interface.
+
+	  If you don't know what to do here, say "Y".
+
 config ARM_PMU_ACPI
 	depends on ARM_PMU && ACPI
 	def_bool y
drivers/perf/riscv_pmu_sbi.c +32 -3
index 2edbc37abadf..bbd6fe021b3a 100644
@@ -19,11 +19,33 @@
 #include <linux/of.h>
 #include <linux/cpu_pm.h>
 #include <linux/sched/clock.h>
+#include <linux/soc/andes/irq.h>
 
 #include <asm/errata_list.h>
 #include <asm/sbi.h>
 #include <asm/cpufeature.h>
 
+#define ALT_SBI_PMU_OVERFLOW(__ovl)					\
+asm volatile(ALTERNATIVE_2(						\
+	"csrr %0, " __stringify(CSR_SSCOUNTOVF),			\
+	"csrr %0, " __stringify(THEAD_C9XX_CSR_SCOUNTEROF),		\
+		THEAD_VENDOR_ID, ERRATA_THEAD_PMU,			\
+		CONFIG_ERRATA_THEAD_PMU,				\
+	"csrr %0, " __stringify(ANDES_CSR_SCOUNTEROF),			\
+		0, RISCV_ISA_EXT_XANDESPMU,				\
+		CONFIG_ANDES_CUSTOM_PMU)				\
+	: "=r" (__ovl) :						\
+	: "memory")
+
+#define ALT_SBI_PMU_OVF_CLEAR_PENDING(__irq_mask)			\
+asm volatile(ALTERNATIVE(						\
+	"csrc " __stringify(CSR_IP) ", %0\n\t",				\
+	"csrc " __stringify(ANDES_CSR_SLIP) ", %0\n\t",			\
+		0, RISCV_ISA_EXT_XANDESPMU,				\
+		CONFIG_ANDES_CUSTOM_PMU)				\
+	: : "r"(__irq_mask)						\
+	: "memory")
+
 #define SYSCTL_NO_USER_ACCESS	0
 #define SYSCTL_USER_ACCESS	1
 #define SYSCTL_LEGACY		2
@@ -61,6 +83,7 @@ static int sysctl_perf_user_access __read_mostly = SYSCTL_USER_ACCESS;
 static union sbi_pmu_ctr_info *pmu_ctr_list;
 static bool riscv_pmu_use_irq;
 static unsigned int riscv_pmu_irq_num;
+static unsigned int riscv_pmu_irq_mask;
 static unsigned int riscv_pmu_irq;
 
 /* Cache the available counters in a bitmask */
@@ -694,7 +717,7 @@ static irqreturn_t pmu_sbi_ovf_handler(int irq, void *dev)
 
 	event = cpu_hw_evt->events[fidx];
 	if (!event) {
-		csr_clear(CSR_SIP, BIT(riscv_pmu_irq_num));
+		ALT_SBI_PMU_OVF_CLEAR_PENDING(riscv_pmu_irq_mask);
 		return IRQ_NONE;
 	}
 
@@ -708,7 +731,7 @@ static irqreturn_t pmu_sbi_ovf_handler(int irq, void *dev)
 	 * Overflow interrupt pending bit should only be cleared after stopping
 	 * all the counters to avoid any race condition.
 	 */
-	csr_clear(CSR_SIP, BIT(riscv_pmu_irq_num));
+	ALT_SBI_PMU_OVF_CLEAR_PENDING(riscv_pmu_irq_mask);
 
 	/* No overflow bit is set */
 	if (!overflow)
@@ -780,7 +803,7 @@ static int pmu_sbi_starting_cpu(unsigned int cpu, struct hlist_node *node)
 
 	if (riscv_pmu_use_irq) {
 		cpu_hw_evt->irq = riscv_pmu_irq;
-		csr_clear(CSR_IP, BIT(riscv_pmu_irq_num));
+		ALT_SBI_PMU_OVF_CLEAR_PENDING(riscv_pmu_irq_mask);
 		enable_percpu_irq(riscv_pmu_irq, IRQ_TYPE_NONE);
 	}
 
@@ -814,8 +837,14 @@ static int pmu_sbi_setup_irqs(struct riscv_pmu *pmu, struct platform_device *pde
 		   riscv_cached_mimpid(0) == 0) {
 		riscv_pmu_irq_num = THEAD_C9XX_RV_IRQ_PMU;
 		riscv_pmu_use_irq = true;
+	} else if (riscv_isa_extension_available(NULL, XANDESPMU) &&
+		   IS_ENABLED(CONFIG_ANDES_CUSTOM_PMU)) {
+		riscv_pmu_irq_num = ANDES_SLI_CAUSE_BASE + ANDES_RV_IRQ_PMOVI;
+		riscv_pmu_use_irq = true;
 	}
 
+	riscv_pmu_irq_mask = BIT(riscv_pmu_irq_num % BITS_PER_LONG);
+
 	if (!riscv_pmu_use_irq)
 		return -EOPNOTSUPP;
 
Signature · 1 line
2.34.1
#18 lore raw

PATCH v9 8/10 dt-bindings: riscv: Add Andes PMU extension description

In reply to Yu Chien Peter Lin

Document the ISA string for Andes Technology performance monitor extension which provides counter overflow interrupt and mode filtering mechanisms.

---
Changes v2 -> v3:
- New patch
Changes v3 -> v4:
- Include Conor's Acked-by
Changes v4 -> v5:
- Include Prabhakar's Reviewed-by
Changes v5 -> v6:
- No change
Changes v6 -> v7:
- No change
Changes v7 -> v8:
- No change
Changes v8 -> v9:
- No change

---
 Documentation/devicetree/bindings/riscv/extensions.yaml | 7 +++++++
 1 file changed, 7 insertions(+)
Documentation/devicetree/bindings/riscv/extensions.yaml +7 -0
index 63d81dc895e5..468c646247aa 100644
@@ -477,5 +477,12 @@ properties:
             latency, as ratified in commit 56ed795 ("Update
             riscv-crypto-spec-vector.adoc") of riscv-crypto.
 
+        - const: xandespmu
+          description:
+            The Andes Technology performance monitor extension for counter overflow
+            and privilege mode filtering. For more details, see Counter Related
+            Registers in the AX45MP datasheet.
+            https://www.andestech.com/wp-content/uploads/AX45MP-1C-Rev.-5.0.0-Datasheet.pdf
+
 additionalProperties: true
 ...
Signature · 1 line
2.34.1
#19 lore raw

PATCH v9 9/10 riscv: dts: renesas: Add Andes PMU extension for r9a07g043f

In reply to Yu Chien Peter Lin

xandespmu stands for Andes Performance Monitor Unit extension. Based on the added Andes PMU ISA string, the SBI PMU driver will make use of the non-standard irq source.

---
Changes v1 -> v2:
- New patch
Changes v2 -> v3:
- No change
Changes v3 -> v4:
- No change
Changes v4 -> v5:
- Include Geert's Reviewed-by
- Include Prabhakar's Reviewed/Tested-by
Changes v5 -> v6:
- Include Conor's Acked-by
Changes v6 -> v7:
- No change
Changes v7 -> v8:
- No change
Changes v8 -> v9:
- No change

---
 arch/riscv/boot/dts/renesas/r9a07g043f.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/riscv/boot/dts/renesas/r9a07g043f.dtsi +1 -1
index 099f3df75b42..d7a66043f13b 100644
@@ -27,7 +27,7 @@ cpu0: cpu@0 {
 			riscv,isa-base = "rv64i";
 			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
 					       "zicntr", "zicsr", "zifencei",
-					       "zihpm";
+					       "zihpm", "xandespmu";
 			mmu-type = "riscv,sv39";
 			i-cache-size = <0x8000>;
 			i-cache-line-size = <0x40>;
Signature · 1 line
2.34.1
Acked-by on v9 9/10
#20 lore raw

Re: [PATCH v9 09/10] riscv: dts: renesas: Add Andes PMU extension for r9a07g043f

Quoted 19 lines · Yu Chien Peter Lin

xandespmu stands for Andes Performance Monitor Unit extension. Based on the added Andes PMU ISA string, the SBI PMU driver will make use of the non-standard irq source.

---
Changes v1 -> v2:
- New patch
Changes v2 -> v3:
- No change
Changes v3 -> v4:
- No change
Changes v4 -> v5:
- Include Geert's Reviewed-by
- Include Prabhakar's Reviewed/Tested-by

Quoted 8 lines

Changes v5 -> v6:
- Include Conor's Acked-by
Changes v6 -> v7:
- No change
Changes v7 -> v8:
- No change
Changes v8 -> v9:
- No change

so Palmer can pick it up with the rest of the series (the Renesas tree merge window for v6.9 has closed)

Gr{oetje,eeting}s,

Geert

Signature · 5 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
#21 lore raw

PATCH v9 10/10 riscv: andes: Support specifying symbolic firmware and hardware raw events

In reply to Yu Chien Peter Lin

From: Locus Wei-Han Chen <[email protected]>

Add the Andes AX45 JSON files that allows specifying symbolic event names for the raw PMU events.

---
Changes v1 -> v2:
- No change
Changes v2 -> v3:
- No change
Changes v3 -> v4:
- No change
Changes v4 -> v5:
- Include Prabhakar's Tested-by
Changes v5 -> v6:
- No change
Changes v6 -> v7:
- No change
Changes v7 -> v8:
- Include Atish's Acked-by
Changes v8 -> v9:
- Include Ian's Acked-by

---
 .../arch/riscv/andes/ax45/firmware.json       |  68 ++++++++++
 .../arch/riscv/andes/ax45/instructions.json   | 127 ++++++++++++++++++
 .../arch/riscv/andes/ax45/memory.json         |  57 ++++++++
 .../arch/riscv/andes/ax45/microarch.json      |  77 +++++++++++
 tools/perf/pmu-events/arch/riscv/mapfile.csv  |   1 +
 5 files changed, 330 insertions(+)
 create mode 100644 tools/perf/pmu-events/arch/riscv/andes/ax45/firmware.json
 create mode 100644 tools/perf/pmu-events/arch/riscv/andes/ax45/instructions.json
 create mode 100644 tools/perf/pmu-events/arch/riscv/andes/ax45/memory.json
 create mode 100644 tools/perf/pmu-events/arch/riscv/andes/ax45/microarch.json
tools/perf/pmu-events/arch/riscv/andes/ax45/firmware.json new file +68 -0
new file mode 100644
index 000000000000..9b4a032186a7
@@ -0,0 +1,68 @@
+[
+  {
+    "ArchStdEvent": "FW_MISALIGNED_LOAD"
+  },
+  {
+    "ArchStdEvent": "FW_MISALIGNED_STORE"
+  },
+  {
+    "ArchStdEvent": "FW_ACCESS_LOAD"
+  },
+  {
+    "ArchStdEvent": "FW_ACCESS_STORE"
+  },
+  {
+    "ArchStdEvent": "FW_ILLEGAL_INSN"
+  },
+  {
+    "ArchStdEvent": "FW_SET_TIMER"
+  },
+  {
+    "ArchStdEvent": "FW_IPI_SENT"
+  },
+  {
+    "ArchStdEvent": "FW_IPI_RECEIVED"
+  },
+  {
+    "ArchStdEvent": "FW_FENCE_I_SENT"
+  },
+  {
+    "ArchStdEvent": "FW_FENCE_I_RECEIVED"
+  },
+  {
+    "ArchStdEvent": "FW_SFENCE_VMA_SENT"
+  },
+  {
+    "ArchStdEvent": "FW_SFENCE_VMA_RECEIVED"
+  },
+  {
+    "ArchStdEvent": "FW_SFENCE_VMA_RECEIVED"
+  },
+  {
+    "ArchStdEvent": "FW_SFENCE_VMA_ASID_RECEIVED"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_GVMA_SENT"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_GVMA_RECEIVED"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_GVMA_VMID_SENT"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_GVMA_VMID_RECEIVED"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_VVMA_SENT"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_VVMA_RECEIVED"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_VVMA_ASID_SENT"
+  },
+  {
+    "ArchStdEvent": "FW_HFENCE_VVMA_ASID_RECEIVED"
+  }
+]
tools/perf/pmu-events/arch/riscv/andes/ax45/instructions.json new file +127 -0

127 lines not on this page · raw message

tools/perf/pmu-events/arch/riscv/andes/ax45/memory.json new file +57 -0

57 lines not on this page · raw message

tools/perf/pmu-events/arch/riscv/andes/ax45/microarch.json new file +77 -0

77 lines not on this page · raw message

tools/perf/pmu-events/arch/riscv/mapfile.csv +1 -0
index cfc449b19810..3d3a809a5446 100644
@@ -17,3 +17,4 @@
 0x489-0x8000000000000007-0x[[:xdigit:]]+,v1,sifive/u74,core
 0x5b7-0x0-0x0,v1,thead/c900-legacy,core
 0x67e-0x80000000db0000[89]0-0x[[:xdigit:]]+,v1,starfive/dubhe-80,core
+0x31e-0x8000000000008a45-0x[[:xdigit:]]+,v1,andes/ax45,core
Signature · 1 line
2.34.1
#22 lore raw
In reply to Yu Chien Peter Lin
This series was applied to riscv/linux.git (for-next) by Palmer Dabbelt <[email protected]>:

Hello:

This series was applied to riscv/linux.git (for-next) by Palmer Dabbelt <[email protected]>:

Quoted 8 lines · On Thu, 22 Feb 2024 16:39:36 +0800 you wrote:

Hi All,

This patch series introduces the Andes PMU extension, which serves the same purpose as Sscofpmf and Smcntrpmf. Its non-standard local interrupt is assigned to bit 18 in the custom S-mode local interrupt enable and pending registers (slie/slip), while the interrupt cause is (256 + 18).

[...]

Here is the summary with links:
- [v9,01/10] riscv: errata: Rename defines for Andes

    https://git.kernel.org/riscv/c/be5e8872b3fb
  - [v9,02/10] irqchip/riscv-intc: Allow large non-standard interrupt number
    https://git.kernel.org/riscv/c/96303bcb401c
  - [v9,03/10] irqchip/riscv-intc: Introduce Andes hart-level interrupt controller
    https://git.kernel.org/riscv/c/f4cc33e78ba8
  - [v9,04/10] dt-bindings: riscv: Add Andes interrupt controller compatible string
    https://git.kernel.org/riscv/c/b88727d554f0
  - [v9,05/10] riscv: dts: renesas: r9a07g043f: Update compatible string to use Andes INTC
    https://git.kernel.org/riscv/c/95113bb70515
  - [v9,06/10] perf: RISC-V: Eliminate redundant interrupt enable/disable operations
    https://git.kernel.org/riscv/c/ea0e0178e101
  - [v9,07/10] perf: RISC-V: Introduce Andes PMU to support perf event sampling
    https://git.kernel.org/riscv/c/bc969d6cc96a
  - [v9,08/10] dt-bindings: riscv: Add Andes PMU extension description
    https://git.kernel.org/riscv/c/61609bf2b29d
  - [v9,09/10] riscv: dts: renesas: Add Andes PMU extension for r9a07g043f
    https://git.kernel.org/riscv/c/270fc77e7b0e
  - [v9,10/10] riscv: andes: Support specifying symbolic firmware and hardware raw events
    https://git.kernel.org/riscv/c/f5102e31c209

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html