clk: qcom: fix frequency table termination in several drivers
Subsystems (3)
cover clk: qcom: fix frequency table termination in several drivers
Add missing terminating entry to frequency table arrays in several drivers. There are separate independent patches for each affected driver.
The series is based on v6.8-rc6.
---
Gabor Juhos (7):
clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays
clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays
clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays
clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays
clk: qcom: camcc-sc8280xp: fix terminating of frequency table arrays
clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays
clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays
drivers/clk/qcom/camcc-sc8280xp.c | 21 +++++++++++++++++++++ drivers/clk/qcom/gcc-ipq5018.c | 3 +++ drivers/clk/qcom/gcc-ipq6018.c | 2 ++ drivers/clk/qcom/gcc-ipq8074.c | 2 ++ drivers/clk/qcom/gcc-ipq9574.c | 1 + drivers/clk/qcom/mmcc-apq8084.c | 2 ++ drivers/clk/qcom/mmcc-msm8974.c | 2 ++ 7 files changed, 33 insertions(+)
---
base-commit: d206a76d7d2726f3b096037f2079ce0bd3ba329b
change-id: 20240223-freq-table-terminator-f78760e7b5e0
Best regards,
Signature · 1 line
Gabor Juhos <[email protected]>
PATCH 1/7 clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays
The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like qcom_find_freq() or qcom_find_freq_floor().
--- drivers/clk/qcom/gcc-ipq5018.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/clk/qcom/gcc-ipq5018.c +3 -0
@@ -857,6 +857,7 @@ static struct clk_rcg2 lpass_sway_clk_src = {static const struct freq_tbl ftbl_pcie0_aux_clk_src[] = {F (2000000 ,P_XO ,12 ,0 ,0 ), + { } };static struct clk_rcg2 pcie0_aux_clk_src = {
@@ -1099,6 +1100,7 @@ static const struct freq_tbl ftbl_qpic_io_macro_clk_src[] = {F (100000000 ,P_GPLL0 ,8 ,0 ,0 ),F (200000000 ,P_GPLL0 ,4 ,0 ,0 ), F(320000000, P_GPLL0, 2.5, 0, 0), + { } }; static struct clk_rcg2 qpic_io_macro_clk_src = {
@@ -1194,6 +1196,7 @@ static struct clk_rcg2 ubi0_axi_clk_src = {static const struct freq_tbl ftbl_ubi0_core_clk_src[] = {F (850000000 ,P_UBI32_PLL ,1 ,0 ,0 ),F (1000000000 ,P_UBI32_PLL ,1 ,0 ,0 ), + { } };static struct clk_rcg2 ubi0_core_clk_src = {
Signature · 1 line
2.44.0
Re: [PATCH 1/7] clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays
Quoting Gabor Juhos (2024-02-29 10:07:46)
Quoted 9 lines
The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like
qcom_find_freq()orqcom_find_freq_floor().Fixes e3fdbef1bab8 ("clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018")Signed-off-by Gabor Juhos <[email protected]>---
Re: [PATCH 1/7] clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays
In reply to Gabor JuhosQuoted 7 lines · Gabor Juhos
The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like
qcom_find_freq()orqcom_find_freq_floor().Fixes e3fdbef1bab8 ("clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018")
Good find!
Looks like these should be backported to the stable kernels as well so someone should add:
to all patches except possibly the sc8280xp one (that camera clock controller was added in 6.8-rc1 so that patch does not need it in case you can these fixes in before 6.8 is released).
Johan
Re: [PATCH 1/7] clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays
Hi Johan,
2024. 03. 01. 10:40 keltezéssel, Johan Hovold írta:
Quoted 11 lines · Gabor Juhos
Quoted 7 lines
The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like
qcom_find_freq()orqcom_find_freq_floor().Fixes e3fdbef1bab8 ("clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018")Good find!
Quoted 8 lines
Looks like these should be backported to the stable kernels as well so someone should add:
to all patches except possibly the sc8280xp one (that camera clock controller was added in 6.8-rc1 so that patch does not need it in case you can these fixes in before 6.8 is released).
You are right maybe, although I did not find strong enough reasons for adding the stable tags.
Only the changes of the gcc-ipq5018 driver has been tested on real hardware the others are not. So those does not fit into the "It must be obviously correct and tested." rule.
Since the support for the IPQ5018 platform is quite incomplete as several drivers are missing even in 6.8-rc6, it is quite unlikely that anyone uses a stable kernel for something serious on such boards. Hence backporting the gcc-ipq5018 changes would not help too much in itself.
Regards,
Gabor
Re: [PATCH 1/7] clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays
Quoted 23 lines · Gabor Juhos
Hi Johan,
2024. 03. 01. 10:40 keltezéssel, Johan Hovold írta:
Quoted 11 lines · Gabor Juhos
Quoted 7 lines
The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like
qcom_find_freq()orqcom_find_freq_floor().Fixes e3fdbef1bab8 ("clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018")Good find!
Quoted 8 lines
Looks like these should be backported to the stable kernels as well so someone should add:
to all patches except possibly the sc8280xp one (that camera clock controller was added in 6.8-rc1 so that patch does not need it in case you can these fixes in before 6.8 is released).
Quoted 6 lines
You are right maybe, although I did not find strong enough reasons for adding the stable tags.
Only the changes of the gcc-ipq5018 driver has been tested on real hardware the others are not. So those does not fit into the "It must be obviously correct and tested." rule.
Since this looks like a straight-forward and obviously correct fix for a bug which could have bad consequences, not being able to test each patch on actual hardware is not a problem.
Johan
Bjorn Andersson
maintainerRe: [PATCH 1/7] clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays
Quoted 27 lines · Johan Hovold
Quoted 26 lines · Gabor Juhos
Hi Johan,
2024. 03. 01. 10:40 keltezéssel, Johan Hovold írta:
Quoted 11 lines · Gabor Juhos
Quoted 7 lines
The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like
qcom_find_freq()orqcom_find_freq_floor().Fixes e3fdbef1bab8 ("clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018")Good find!
Quoted 8 lines
Looks like these should be backported to the stable kernels as well so someone should add:
to all patches except possibly the sc8280xp one (that camera clock controller was added in 6.8-rc1 so that patch does not need it in case you can these fixes in before 6.8 is released).
You are right maybe, although I did not find strong enough reasons for adding the stable tags.
Quoted 8 lines
Quoted 3 lines
Only the changes of the gcc-ipq5018 driver has been tested on real hardware the others are not. So those does not fit into the "It must be obviously correct and tested." rule.
Since this looks like a straight-forward and obviously correct fix for a bug which could have bad consequences, not being able to test each patch on actual hardware is not a problem.
I agree, and I'm adding the Cc: stable while applying the patches.
Thanks,
Bjorn
PATCH 2/7 clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays
In reply to Gabor JuhosThe frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like qcom_find_freq() or qcom_find_freq_floor().
Only compile tested.
--- drivers/clk/qcom/gcc-ipq6018.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/clk/qcom/gcc-ipq6018.c +2 -0
@@ -1554,6 +1554,7 @@ static struct clk_regmap_div nss_ubi0_div_clk_src = {static const struct freq_tbl ftbl_pcie_aux_clk_src[] = {F (24000000 ,P_XO ,1 ,0 ,0 ), + { } };static const struct clk_parent_data gcc_xo_gpll0_core_pi_sleep_clk[] = {
@@ -1734,6 +1735,7 @@ static const struct freq_tbl ftbl_sdcc_ice_core_clk_src[] = {F (160000000 ,P_GPLL0 ,5 ,0 ,0 ),F (216000000 ,P_GPLL6 ,5 ,0 ,0 ), F(308570000, P_GPLL6, 3.5, 0, 0), + { } }; static const struct clk_parent_data gcc_xo_gpll0_gpll6_gpll0_div2[] = {
Signature · 1 line
2.44.0
Re: [PATCH 2/7] clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays
Quoting Gabor Juhos (2024-02-29 10:07:47)
Quoted 11 lines
The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like
qcom_find_freq()orqcom_find_freq_floor().Only compile tested.
Fixes d9db07f088af ("clk: qcom: Add ipq6018 Global Clock Controller support")Signed-off-by Gabor Juhos <[email protected]>---
PATCH 3/7 clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays
In reply to Gabor JuhosThe frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like qcom_find_freq() or qcom_find_freq_floor().
Only compile tested.
--- drivers/clk/qcom/gcc-ipq8074.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/clk/qcom/gcc-ipq8074.c +2 -0
@@ -644,6 +644,7 @@ static struct clk_rcg2 pcie0_axi_clk_src = {static const struct freq_tbl ftbl_pcie_aux_clk_src[] = {F (19200000 ,P_XO ,1 ,0 ,0 ), + { } };static const struct clk_parent_data gcc_xo_gpll0_sleep_clk[] = {
@@ -795,6 +796,7 @@ static const struct freq_tbl ftbl_sdcc_ice_core_clk_src[] = {F (19200000 ,P_XO ,1 ,0 ,0 ),F (160000000 ,P_GPLL0 ,5 ,0 ,0 ), F(308570000, P_GPLL6, 3.5, 0, 0), + { } }; static const struct clk_parent_data gcc_xo_gpll0_gpll6_gpll0_div2[] = {
Signature · 1 line
2.44.0
Re: [PATCH 3/7] clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays
Quoting Gabor Juhos (2024-02-29 10:07:48)
Quoted 11 lines
The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like
qcom_find_freq()orqcom_find_freq_floor().Only compile tested.
Fixes 9607f6224b39 ("clk: qcom: ipq8074: add PCIE, USB and SDCC clocks")Signed-off-by Gabor Juhos <[email protected]>---
PATCH 4/7 clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays
In reply to Gabor JuhosThe frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like qcom_find_freq() or qcom_find_freq_floor().
Only compile tested.
--- drivers/clk/qcom/gcc-ipq9574.c | 1 + 1 file changed, 1 insertion(+)
drivers/clk/qcom/gcc-ipq9574.c +1 -0
@@ -2082,6 +2082,7 @@ static struct clk_branch gcc_sdcc1_apps_clk = {static const struct freq_tbl ftbl_sdcc_ice_core_clk_src[] = {F (150000000 ,P_GPLL4 ,8 ,0 ,0 ),F (300000000 ,P_GPLL4 ,4 ,0 ,0 ), + { } };static struct clk_rcg2 sdcc1_ice_core_clk_src = {
Signature · 1 line
2.44.0
Re: [PATCH 4/7] clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays
Quoting Gabor Juhos (2024-02-29 10:07:49)
Quoted 11 lines
The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like
qcom_find_freq()orqcom_find_freq_floor().Only compile tested.
Fixes d75b82cff488 ("clk: qcom: Add Global Clock Controller driver for IPQ9574")Signed-off-by Gabor Juhos <[email protected]>---
PATCH 5/7 clk: qcom: camcc-sc8280xp: fix terminating of frequency table arrays
In reply to Gabor JuhosThe frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like qcom_find_freq() or qcom_find_freq_floor().
Only compile tested.
--- drivers/clk/qcom/camcc-sc8280xp.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
drivers/clk/qcom/camcc-sc8280xp.c +21 -0
@@ -630,6 +630,7 @@ static const struct freq_tbl ftbl_camcc_bps_clk_src[] = {F (480000000 ,P_CAMCC_PLL7_OUT_EVEN ,1 ,0 ,0 ),F (600000000 ,P_CAMCC_PLL0_OUT_MAIN ,2 ,0 ,0 ), F(760000000, P_CAMCC_PLL3_OUT_EVEN, 1, 0, 0), + { } }; static struct clk_rcg2 camcc_bps_clk_src = {
@@ -654,6 +655,7 @@ static const struct freq_tbl ftbl_camcc_camnoc_axi_clk_src[] = {F (320000000 ,P_CAMCC_PLL7_OUT_ODD ,1 ,0 ,0 ),F (400000000 ,P_CAMCC_PLL0_OUT_ODD ,1 ,0 ,0 ), F(480000000, P_CAMCC_PLL7_OUT_EVEN, 1, 0, 0), + { } }; static struct clk_rcg2 camcc_camnoc_axi_clk_src = {
@@ -673,6 +675,7 @@ static struct clk_rcg2 camcc_camnoc_axi_clk_src = {static const struct freq_tbl ftbl_camcc_cci_0_clk_src[] = {F (19200000 ,P_BI_TCXO ,1 ,0 ,0 ),F (37500000 ,P_CAMCC_PLL0_OUT_EVEN ,16 ,0 ,0 ), + { } };static struct clk_rcg2 camcc_cci_0_clk_src = {
@@ -735,6 +738,7 @@ static const struct freq_tbl ftbl_camcc_cphy_rx_clk_src[] = {F (19200000 ,P_BI_TCXO ,1 ,0 ,0 ),F (240000000 ,P_CAMCC_PLL0_OUT_EVEN ,2.5 ,0 ,0 ), F(400000000, P_CAMCC_PLL0_OUT_ODD, 1, 0, 0), + { } }; static struct clk_rcg2 camcc_cphy_rx_clk_src = {
@@ -754,6 +758,7 @@ static struct clk_rcg2 camcc_cphy_rx_clk_src = {static const struct freq_tbl ftbl_camcc_csi0phytimer_clk_src[] = {F (19200000 ,P_BI_TCXO ,1 ,0 ,0 ),F (300000000 ,P_CAMCC_PLL0_OUT_EVEN ,2 ,0 ,0 ), + { } };static struct clk_rcg2 camcc_csi0phytimer_clk_src = {
@@ -818,6 +823,7 @@ static const struct freq_tbl ftbl_camcc_fast_ahb_clk_src[] = {F (200000000 ,P_CAMCC_PLL0_OUT_EVEN ,3 ,0 ,0 ),F (300000000 ,P_CAMCC_PLL0_OUT_MAIN ,4 ,0 ,0 ), F(400000000, P_CAMCC_PLL0_OUT_MAIN, 3, 0, 0), + { } }; static struct clk_rcg2 camcc_fast_ahb_clk_src = {
@@ -838,6 +844,7 @@ static const struct freq_tbl ftbl_camcc_icp_clk_src[] = {F (19200000 ,P_BI_TCXO ,1 ,0 ,0 ),F (400000000 ,P_CAMCC_PLL0_OUT_ODD ,1 ,0 ,0 ), F(600000000, P_CAMCC_PLL0_OUT_MAIN, 2, 0, 0), + { } }; static struct clk_rcg2 camcc_icp_clk_src = {
@@ -860,6 +867,7 @@ static const struct freq_tbl ftbl_camcc_ife_0_clk_src[] = {F (558000000 ,P_CAMCC_PLL3_OUT_EVEN ,1 ,0 ,0 ),F (637000000 ,P_CAMCC_PLL3_OUT_EVEN ,1 ,0 ,0 ), F(760000000, P_CAMCC_PLL3_OUT_EVEN, 1, 0, 0), + { } }; static struct clk_rcg2 camcc_ife_0_clk_src = {
@@ -883,6 +891,7 @@ static const struct freq_tbl ftbl_camcc_ife_0_csid_clk_src[] = {F (400000000 ,P_CAMCC_PLL0_OUT_ODD ,1 ,0 ,0 ),F (480000000 ,P_CAMCC_PLL7_OUT_EVEN ,1 ,0 ,0 ), F(600000000, P_CAMCC_PLL0_OUT_MAIN, 2, 0, 0), + { } }; static struct clk_rcg2 camcc_ife_0_csid_clk_src = {
@@ -905,6 +914,7 @@ static const struct freq_tbl ftbl_camcc_ife_1_clk_src[] = {F (558000000 ,P_CAMCC_PLL4_OUT_EVEN ,1 ,0 ,0 ),F (637000000 ,P_CAMCC_PLL4_OUT_EVEN ,1 ,0 ,0 ), F(760000000, P_CAMCC_PLL4_OUT_EVEN, 1, 0, 0), + { } }; static struct clk_rcg2 camcc_ife_1_clk_src = {
@@ -941,6 +951,7 @@ static const struct freq_tbl ftbl_camcc_ife_2_clk_src[] = {F (558000000 ,P_CAMCC_PLL5_OUT_EVEN ,1 ,0 ,0 ),F (637000000 ,P_CAMCC_PLL5_OUT_EVEN ,1 ,0 ,0 ), F(760000000, P_CAMCC_PLL5_OUT_EVEN, 1, 0, 0), + { } }; static struct clk_rcg2 camcc_ife_2_clk_src = {
@@ -962,6 +973,7 @@ static const struct freq_tbl ftbl_camcc_ife_2_csid_clk_src[] = {F (400000000 ,P_CAMCC_PLL0_OUT_ODD ,1 ,0 ,0 ),F (480000000 ,P_CAMCC_PLL7_OUT_EVEN ,1 ,0 ,0 ), F(600000000, P_CAMCC_PLL0_OUT_MAIN, 2, 0, 0), + { } }; static struct clk_rcg2 camcc_ife_2_csid_clk_src = {
@@ -984,6 +996,7 @@ static const struct freq_tbl ftbl_camcc_ife_3_clk_src[] = {F (558000000 ,P_CAMCC_PLL6_OUT_EVEN ,1 ,0 ,0 ),F (637000000 ,P_CAMCC_PLL6_OUT_EVEN ,1 ,0 ,0 ), F(760000000, P_CAMCC_PLL6_OUT_EVEN, 1, 0, 0), + { } }; static struct clk_rcg2 camcc_ife_3_clk_src = {
@@ -1020,6 +1033,7 @@ static const struct freq_tbl ftbl_camcc_ife_lite_0_clk_src[] = {F (400000000 ,P_CAMCC_PLL0_OUT_ODD ,1 ,0 ,0 ),F (480000000 ,P_CAMCC_PLL7_OUT_EVEN ,1 ,0 ,0 ), F(600000000, P_CAMCC_PLL0_OUT_MAIN, 2, 0, 0), + { } }; static struct clk_rcg2 camcc_ife_lite_0_clk_src = {
@@ -1140,6 +1154,7 @@ static const struct freq_tbl ftbl_camcc_ipe_0_clk_src[] = {F (475000000 ,P_CAMCC_PLL1_OUT_EVEN ,1 ,0 ,0 ),F (520000000 ,P_CAMCC_PLL1_OUT_EVEN ,1 ,0 ,0 ), F(600000000, P_CAMCC_PLL1_OUT_EVEN, 1, 0, 0), + { } }; static struct clk_rcg2 camcc_ipe_0_clk_src = {
@@ -1163,6 +1178,7 @@ static const struct freq_tbl ftbl_camcc_jpeg_clk_src[] = {F (400000000 ,P_CAMCC_PLL0_OUT_ODD ,1 ,0 ,0 ),F (480000000 ,P_CAMCC_PLL7_OUT_EVEN ,1 ,0 ,0 ), F(600000000, P_CAMCC_PLL0_OUT_MAIN, 2, 0, 0), + { } }; static struct clk_rcg2 camcc_jpeg_clk_src = {
@@ -1184,6 +1200,7 @@ static const struct freq_tbl ftbl_camcc_lrme_clk_src[] = {F (300000000 ,P_CAMCC_PLL0_OUT_EVEN ,2 ,0 ,0 ),F (320000000 ,P_CAMCC_PLL7_OUT_ODD ,1 ,0 ,0 ), F(400000000, P_CAMCC_PLL0_OUT_MAIN, 3, 0, 0), + { } }; static struct clk_rcg2 camcc_lrme_clk_src = {
@@ -1204,6 +1221,7 @@ static const struct freq_tbl ftbl_camcc_mclk0_clk_src[] = {F (19200000 ,P_BI_TCXO ,1 ,0 ,0 ),F (24000000 ,P_CAMCC_PLL2_OUT_EARLY ,10 ,1 ,4 ), F(64000000, P_CAMCC_PLL2_OUT_EARLY, 15, 0, 0), + { } }; static struct clk_rcg2 camcc_mclk0_clk_src = {
@@ -1320,6 +1338,7 @@ static struct clk_rcg2 camcc_mclk7_clk_src = {static const struct freq_tbl ftbl_camcc_sleep_clk_src[] = {F (32000 ,P_SLEEP_CLK ,1 ,0 ,0 ), + { } };static struct clk_rcg2 camcc_sleep_clk_src = {
@@ -1339,6 +1358,7 @@ static struct clk_rcg2 camcc_sleep_clk_src = {static const struct freq_tbl ftbl_camcc_slow_ahb_clk_src[] = {F (19200000 ,P_BI_TCXO ,1 ,0 ,0 ),F (80000000 ,P_CAMCC_PLL7_OUT_EVEN ,6 ,0 ,0 ), + { } };static struct clk_rcg2 camcc_slow_ahb_clk_src = {
@@ -1357,6 +1377,7 @@ static struct clk_rcg2 camcc_slow_ahb_clk_src = {static const struct freq_tbl ftbl_camcc_xo_clk_src[] = {F (19200000 ,P_BI_TCXO ,1 ,0 ,0 ), + { } };static struct clk_rcg2 camcc_xo_clk_src = {
Signature · 1 line
2.44.0
Re: [PATCH 5/7] clk: qcom: camcc-sc8280xp: fix terminating of frequency table arrays
Quoting Gabor Juhos (2024-02-29 10:07:50)
Quoted 11 lines
The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like
qcom_find_freq()orqcom_find_freq_floor().Only compile tested.
Fixes ff93872a9c61 ("clk: qcom: camcc-sc8280xp: Add sc8280xp CAMCC")Signed-off-by Gabor Juhos <[email protected]>---
PATCH 6/7 clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays
In reply to Gabor JuhosThe frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like qcom_find_freq() or qcom_find_freq_floor().
Only compile tested.
--- drivers/clk/qcom/mmcc-apq8084.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/clk/qcom/mmcc-apq8084.c +2 -0
@@ -348,6 +348,7 @@ static struct freq_tbl ftbl_mmss_axi_clk[] = {F (333430000 ,P_MMPLL1 ,3.5 ,0 ,0 ),F (400000000 ,P_MMPLL0 ,2 ,0 ,0 ), F(466800000, P_MMPLL1, 2.5, 0, 0), + { } }; static struct clk_rcg2 mmss_axi_clk_src = {
@@ -372,6 +373,7 @@ static struct freq_tbl ftbl_ocmemnoc_clk[] = {F (150000000 ,P_GPLL0 ,4 ,0 ,0 ),F (228570000 ,P_MMPLL0 ,3.5 ,0 ,0 ), F(320000000, P_MMPLL0, 2.5, 0, 0), + { } }; static struct clk_rcg2 ocmemnoc_clk_src = {
Signature · 1 line
2.44.0
Re: [PATCH 6/7] clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays
Quoting Gabor Juhos (2024-02-29 10:07:51)
Quoted 11 lines
The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like
qcom_find_freq()orqcom_find_freq_floor().Only compile tested.
Fixes 2b46cd23a5a2 ("clk: qcom: Add APQ8084 Multimedia Clock Controller (MMCC) support")Signed-off-by Gabor Juhos <[email protected]>---
PATCH 7/7 clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays
In reply to Gabor JuhosThe frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like qcom_find_freq() or qcom_find_freq_floor().
Only compile tested.
--- drivers/clk/qcom/mmcc-msm8974.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/clk/qcom/mmcc-msm8974.c +2 -0
@@ -290,6 +290,7 @@ static struct freq_tbl ftbl_mmss_axi_clk[] = {F (291750000 ,P_MMPLL1 ,4 ,0 ,0 ),F (400000000 ,P_MMPLL0 ,2 ,0 ,0 ), F(466800000, P_MMPLL1, 2.5, 0, 0), + { } }; static struct clk_rcg2 mmss_axi_clk_src = {
@@ -314,6 +315,7 @@ static struct freq_tbl ftbl_ocmemnoc_clk[] = {F (150000000 ,P_GPLL0 ,4 ,0 ,0 ),F (291750000 ,P_MMPLL1 ,4 ,0 ,0 ), F(400000000, P_MMPLL0, 2, 0, 0), + { } }; static struct clk_rcg2 ocmemnoc_clk_src = {
Signature · 1 line
2.44.0
Re: [PATCH 7/7] clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays
Quoting Gabor Juhos (2024-02-29 10:07:52)
Quoted 11 lines
The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like
qcom_find_freq()orqcom_find_freq_floor().Only compile tested.
Fixes d8b212014e69 ("clk: qcom: Add support for MSM8974's multimedia clock controller (MMCC)")Signed-off-by Gabor Juhos <[email protected]>---
Quoted 8 lines · Gabor Juhos
Add missing terminating entry to frequency table arrays in several drivers. There are separate independent patches for each affected driver.
The series is based on v6.8-rc6.
[...]
Applied, thanks!
[1/7] clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays
commit: 90ad946fff70f312b8d23226afc38c13ddd88c4b
[2/7] clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays
commit: cdbc6e2d8108bc47895e5a901cfcaf799b00ca8d
[3/7] clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays
commit: 1040ef5ed95d6fd2628bad387d78a61633e09429
[4/7] clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays
commit: bd2b6395671d823caa38d8e4d752de2448ae61e1
[5/7] clk: qcom: camcc-sc8280xp: fix terminating of frequency table arrays
commit: 6a3d70f7802a98e6c28a74f997a264118b9f50cd
[6/7] clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays
commit: a903cfd38d8dee7e754fb89fd1bebed99e28003d
[7/7] clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays
commit: e2c02a85bf53ae86d79b5fccf0a75ac0b78e0c96Best regards,
Signature · 1 line
Bjorn Andersson <[email protected]>