power: supply: bq2415x_charger: report online status
Subsystems (2)
PATCH v3 1/1 power: supply: bq2415x_charger: report online status
Provide the Online property. This chip does not have specific flags to indicate the presence of an input voltage, but this is implied by all valid charging states. Fault states also only occur when VBUS is present, so set Online true for those as well.
--- drivers/power/supply/bq2415x_charger.c | 11 +++++++++++ 1 file changed, 11 insertions(+)
drivers/power/supply/bq2415x_charger.c +11 -0
@@ -991,6 +991,7 @@ static enum power_supply_property bq2415x_power_supply_props[] = {/* TODO: maybe add more power supply properties */ POWER_SUPPLY_PROP_STATUS ,POWER_SUPPLY_PROP_MODEL_NAME , + POWER_SUPPLY_PROP_ONLINE, }; static int bq2415x_power_supply_get_property(struct power_supply *psy,
@@ -1017,6 +1018,16 @@ static int bq2415x_power_supply_get_property(struct power_supply *psy,case POWER_SUPPLY_PROP_MODEL_NAME : val->strval = bq->model;break ; +case POWER_SUPPLY_PROP_ONLINE : +/* VBUS is present for all charging and fault states, +* except the 'Ready' state. +*/ + ret =bq2415x_exec_command (bq,BQ2415X_CHARGE_STATUS ); +if (ret <0 ) +return ret; +else + val->intval = ret >0 ; +break ;default :return -EINVAL ; }
Signature · 1 line
2.43.0
Sebastian Reichel
AppliedQuoted 6 lines · Sicelo A. Mhlongo
Provide the Online property. This chip does not have specific flags to indicate the presence of an input voltage, but this is implied by all valid charging states. Fault states also only occur when VBUS is present, so set Online true for those as well.
Applied, thanks!
[1/1] power: supply: bq2415x_charger: report online status
commit: 9a451f1b028e116d037a93bf13eb8f8620994205
Best regards,
Signature · 1 line
Sebastian Reichel <[email protected]>
Hi,
drivers/power/supply/bq2415x_charger.c static int bq2415x_power_supply_get_property(struct power_supply *psy, · line 1028
Quoted 4 lines · Sicelo A. Mhlongo
drivers/power/supply/bq2415x_charger.c +4
-0+ ret =bq2415x_exec_command (bq,BQ2415X_CHARGE_STATUS ); +if (ret <0 ) +return ret; +else
The else is not needed, since the if returns. I dropped it while applying.
Greetings,
-- Sebastian