Skip to contentSkip to conversation

cxl: Remove checking of iter in cxl_endpoint_get_perf_coordinates()

PATCH Superseded Dave Jiang 2 participants 3 messages Feb 29, 2024 – Mar 6, 2024 CXL

v2 of 7 Superseded Latest is v7 →

lore
Share & tools
lore

Dave Jiang

author maintainer
#0 lore raw

PATCH v2 1/2 cxl: Remove checking of iter in cxl_endpoint_get_perf_coordinates()

The while() loop in cxl_endpoint_get_perf_coordinates() checks to see if 'iter' is valid as part of the condition breaking out of the loop. However, iter is being used before the check at the end of the while loop before the next iteration starts. Given that the loop doesn't expect the iter to be NULL because it stops before the root port, remove the iter check.

The presence of the iter or removing the iter does not impact the behavior of the code. This is a code clean up and not a bug fix.

---
v2:
- Add explanation of not a bug fix in commit log. (Dan)

---
 drivers/cxl/core/port.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/cxl/core/port.c +1 -1
index e59d9d37aa65..e1d30a885700 100644
@@ -2142,7 +2142,7 @@ int cxl_endpoint_get_perf_coordinates(struct cxl_port *port,
 	 * port each iteration. If the parent is cxl root then there is
 	 * nothing to gather.
 	 */
-	while (iter && !is_cxl_root(to_cxl_port(iter->dev.parent))) {
+	while (!is_cxl_root(to_cxl_port(iter->dev.parent))) {
 		combine_coordinates(&c, &dport->sw_coord);
 		c.write_latency += dport->link_latency;
 		c.read_latency += dport->link_latency;
Signature · 1 line
2.43.0
author maintainer
#1 lore raw

PATCH v2 2/2 cxl: Add checks to access_coordinate calculation to fail missing data

Jonathan noted that when the coordinates for host bridge and switches can be 0s if no actual data are retrieved and the calculation continues. The resulting number would be inaccurate. Add checks to ensure that the calculation would complete only if the numbers are valid.

The issue of bad data showing up from ACPI or CDAT currently is not expected to show up on production systems or endpoint devices. The changes in this commit are code enhancement and not bug fixes.

---
v2:
- Add explanation of not a bug fix in commit log. (Dan)

---
 drivers/cxl/core/port.c | 31 +++++++++++++++++++++++++++----
 1 file changed, 27 insertions(+), 4 deletions(-)
drivers/cxl/core/port.c +27 -4
index e1d30a885700..2c82fe24b789 100644
@@ -2110,6 +2110,20 @@ static void combine_coordinates(struct access_coordinate *c1,
 		c1->read_latency += c2->read_latency;
 }
 
+static bool coordinates_invalid(struct access_coordinate *c)
+{
+	if (!c->read_bandwidth && !c->write_bandwidth &&
+	    !c->read_latency && !c->write_latency)
+		return true;
+
+	return false;
+}
+
+static bool parent_port_is_cxl_root(struct cxl_port *port)
+{
+	return is_cxl_root(to_cxl_port(port->dev.parent));
+}
+
 /**
  * cxl_endpoint_get_perf_coordinates - Retrieve performance numbers stored in dports
  *				   of CXL path
@@ -2142,16 +2156,25 @@ int cxl_endpoint_get_perf_coordinates(struct cxl_port *port,
 	 * port each iteration. If the parent is cxl root then there is
 	 * nothing to gather.
 	 */
-	while (!is_cxl_root(to_cxl_port(iter->dev.parent))) {
-		combine_coordinates(&c, &dport->sw_coord);
+	while (!parent_port_is_cxl_root(iter)) {
+		iter = to_cxl_port(iter->dev.parent);
+
+		/* There's no CDAT for the host bridge, so skip if so. */
+		if (!parent_port_is_cxl_root(iter)) {
+			if (coordinates_invalid(&dport->sw_coord))
+				return -EINVAL;
+
+			combine_coordinates(&c, &dport->sw_coord);
+		}
+
 		c.write_latency += dport->link_latency;
 		c.read_latency += dport->link_latency;
-
-		iter = to_cxl_port(iter->dev.parent);
 		dport = iter->parent_dport;
 	}
 
 	/* Augment with the generic port (host bridge) perf data */
+	if (coordinates_invalid(&dport->hb_coord))
+		return -EINVAL;
 	combine_coordinates(&c, &dport->hb_coord);
 
 	/* Get the calculated PCI paths bandwidth */
Signature · 1 line
2.43.0
Reviewed-by on v2 1/2
#2 lore raw
In reply to Dave Jiang
Quoted 10 lines · On Thu, 29 Feb 2024 13:30:39 -0700 Dave Jiang <[email protected]> wrote:

The while() loop in cxl_endpoint_get_perf_coordinates() checks to see if 'iter' is valid as part of the condition breaking out of the loop. However, iter is being used before the check at the end of the while loop before the next iteration starts. Given that the loop doesn't expect the iter to be NULL because it stops before the root port, remove the iter check.

The presence of the iter or removing the iter does not impact the behavior of the code. This is a code clean up and not a bug fix.

Quoted 20 lines

---
v2:
- Add explanation of not a bug fix in commit log. (Dan)

---
 drivers/cxl/core/port.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/cxl/core/port.c +1 -1
index e59d9d37aa65..e1d30a885700 100644
@@ -2142,7 +2142,7 @@ int cxl_endpoint_get_perf_coordinates(struct cxl_port *port,
 	 * port each iteration. If the parent is cxl root then there is
 	 * nothing to gather.
 	 */
-	while (iter && !is_cxl_root(to_cxl_port(iter->dev.parent))) {
+	while (!is_cxl_root(to_cxl_port(iter->dev.parent))) {
 		combine_coordinates(&c, &dport->sw_coord);
 		c.write_latency += dport->link_latency;
 		c.read_latency += dport->link_latency;