Skip to contentSkip to conversation

iio: adc: twl4030-madc: Make use of device properties

PATCH Superseded Andy Shevchenko 2 participants 2 messages Feb 28, 2024 – Mar 3, 2024 IIO

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 iio: adc: twl4030-madc: Make use of device properties

Convert the module to be property provider agnostic and allow it to be used on non-OF platforms.

Include mod_devicetable.h explicitly to replace the dropped of.h which included mod_devicetable.h indirectly.

---
 drivers/iio/adc/twl4030-madc.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)
drivers/iio/adc/twl4030-madc.c +6 -8
index 4a247ca25a44..a7b6b81014de 100644
@@ -19,10 +19,12 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/slab.h>
 #include <linux/mfd/twl.h>
-#include <linux/module.h>
 #include <linux/stddef.h>
 #include <linux/mutex.h>
 #include <linux/bitops.h>
@@ -30,7 +32,6 @@
 #include <linux/types.h>
 #include <linux/gfp.h>
 #include <linux/err.h>
-#include <linux/of.h>
 #include <linux/regulator/consumer.h>
 
 #include <linux/iio/iio.h>
@@ -746,7 +747,6 @@ static int twl4030_madc_probe(struct platform_device *pdev)
 {
 	struct twl4030_madc_data *madc;
 	struct twl4030_madc_platform_data *pdata = dev_get_platdata(&pdev->dev);
-	struct device_node *np = pdev->dev.of_node;
 	int irq, ret;
 	u8 regval;
 	struct iio_dev *iio_dev = NULL;
@@ -779,7 +779,7 @@ static int twl4030_madc_probe(struct platform_device *pdev)
 	if (pdata)
 		madc->use_second_irq = (pdata->irq_line != 1);
 	else
-		madc->use_second_irq = of_property_read_bool(np,
+		madc->use_second_irq = device_property_read_bool(&pdev->dev,
 				       "ti,system-uses-second-madc-irq");
 
 	madc->imr = madc->use_second_irq ? TWL4030_MADC_IMR2 :
@@ -905,20 +905,18 @@ static void twl4030_madc_remove(struct platform_device *pdev)
 	regulator_disable(madc->usb3v1);
 }
 
-#ifdef CONFIG_OF
 static const struct of_device_id twl_madc_of_match[] = {
 	{ .compatible = "ti,twl4030-madc", },
-	{ },
+	{ }
 };
 MODULE_DEVICE_TABLE(of, twl_madc_of_match);
-#endif
 
 static struct platform_driver twl4030_madc_driver = {
 	.probe = twl4030_madc_probe,
 	.remove_new = twl4030_madc_remove,
 	.driver = {
 		   .name = "twl4030_madc",
-		   .of_match_table = of_match_ptr(twl_madc_of_match),
+		   .of_match_table = twl_madc_of_match,
 	},
 };
 
Signature · 1 line
2.43.0.rc1.1.gbec44491f096
maintainer
#1 lore raw
Quoted 5 lines · On Wed, 28 Feb 2024 22:59:27 +0200 Andy Shevchenko…

Convert the module to be property provider agnostic and allow it to be used on non-OF platforms.

Include mod_devicetable.h explicitly to replace the dropped of.h which included mod_devicetable.h indirectly.

It seems fairly implausible anyone will use this ancient device with any other firmware, but as conversion is trivial and provides one less place for people to copy of specific handling from i tried applying it.

However it doesn't build...

drivers/iio/adc/twl4030-madc.c:754:24: error: ‘np’ undeclared (first use in this function); did you mean ‘up’?

  754 |         if (!pdata && !np) {
      |                        ^~
      |                        up

I guess !dev_fwnode(dev) instead?

Jonathan

Quoted 72 lines
---
 drivers/iio/adc/twl4030-madc.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)
drivers/iio/adc/twl4030-madc.c +6 -8
index 4a247ca25a44..a7b6b81014de 100644
@@ -19,10 +19,12 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/slab.h>
 #include <linux/mfd/twl.h>
-#include <linux/module.h>
 #include <linux/stddef.h>
 #include <linux/mutex.h>
 #include <linux/bitops.h>
@@ -30,7 +32,6 @@
 #include <linux/types.h>
 #include <linux/gfp.h>
 #include <linux/err.h>
-#include <linux/of.h>
 #include <linux/regulator/consumer.h>
 
 #include <linux/iio/iio.h>
@@ -746,7 +747,6 @@ static int twl4030_madc_probe(struct platform_device *pdev)
 {
 	struct twl4030_madc_data *madc;
 	struct twl4030_madc_platform_data *pdata = dev_get_platdata(&pdev->dev);
-	struct device_node *np = pdev->dev.of_node;
 	int irq, ret;
 	u8 regval;
 	struct iio_dev *iio_dev = NULL;
@@ -779,7 +779,7 @@ static int twl4030_madc_probe(struct platform_device *pdev)
 	if (pdata)
 		madc->use_second_irq = (pdata->irq_line != 1);
 	else
-		madc->use_second_irq = of_property_read_bool(np,
+		madc->use_second_irq = device_property_read_bool(&pdev->dev,
 				       "ti,system-uses-second-madc-irq");
 
 	madc->imr = madc->use_second_irq ? TWL4030_MADC_IMR2 :
@@ -905,20 +905,18 @@ static void twl4030_madc_remove(struct platform_device *pdev)
 	regulator_disable(madc->usb3v1);
 }
 
-#ifdef CONFIG_OF
 static const struct of_device_id twl_madc_of_match[] = {
 	{ .compatible = "ti,twl4030-madc", },
-	{ },
+	{ }
 };
 MODULE_DEVICE_TABLE(of, twl_madc_of_match);
-#endif
 
 static struct platform_driver twl4030_madc_driver = {
 	.probe = twl4030_madc_probe,
 	.remove_new = twl4030_madc_remove,
 	.driver = {
 		   .name = "twl4030_madc",
-		   .of_match_table = of_match_ptr(twl_madc_of_match),
+		   .of_match_table = twl_madc_of_match,
 	},
 };