FAILED: patch "[PATCH] mmc: sdhci-xenon: fix PHY init clock stability" failed to apply to 4.19-stable tree

The patch below does not apply to the 4.19-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-4.19.y
git checkout FETCH_HEAD
git cherry-pick -x 8e9f25a290ae0016353c9ea13314c95fb3207812
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2024030401-cushy-sterility-1d74@gregkh' --subject-prefix 'PATCH 4.19.y' HEAD^..

Possible dependencies:

8e9f25a290ae ("mmc: sdhci-xenon: fix PHY init clock stability")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 8e9f25a290ae0016353c9ea13314c95fb3207812 Mon Sep 17 00:00:00 2001
From: Elad Nachman <[email protected]>
Date: Thu, 22 Feb 2024 22:09:30 +0200
Subject: [PATCH] mmc: sdhci-xenon: fix PHY init clock stability

Each time SD/mmc phy is initialized, at times, in some of the attempts, phy fails to completes its initialization which results into timeout error. Per the HW spec, it is a pre-requisite to ensure a stable SD clock before a phy initialization is attempted.

index 8cf3a375de65..c3096230a969 100644
@@ -11,6 +11,7 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/ktime.h>
+#include <linux/iopoll.h>
 #include <linux/of_address.h>
 
 #include "sdhci-pltfm.h"

@@ -216,6 +217,19 @@ static int xenon_alloc_emmc_phy(struct sdhci_host *host)
 	return 0;
 }
 
+static int xenon_check_stability_internal_clk(struct sdhci_host *host)
+{
+	u32 reg;
+	int err;
+
+	err = read_poll_timeout(sdhci_readw, reg, reg & SDHCI_CLOCK_INT_STABLE,
+				1100, 20000, false, host, SDHCI_CLOCK_CONTROL);
+	if (err)
+		dev_err(mmc_dev(host->mmc), "phy_init: Internal clock never stabilized.\n");
+
+	return err;
+}
+
 /*
  * eMMC 5.0/5.1 PHY init/re-init.
  * eMMC PHY init should be executed after:

@@ -232,6 +246,11 @@ static int xenon_emmc_phy_init(struct sdhci_host *host)
 	struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
 	struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
 
+	int ret = xenon_check_stability_internal_clk(host);
+
+	if (ret)
+		return ret;
+
 	reg = sdhci_readl(host, phy_regs->timing_adj);
 	reg |= XENON_PHY_INITIALIZAION;
 	sdhci_writel(host, reg, phy_regs->timing_adj);