Skip to contentSkip to conversation

ASoC: nau8325: Modify driver code and dtschema.

PATCH Superseded Seven Lee 2 participants 7 messages Mar 4, 2024 – Mar 12, 2024

Subsystems (3)

v3 of 6 Superseded Latest is v6 →

lore
Share & tools
lore

Seven Lee

author
#0 lore raw

v3 cover ASoC: nau8325: Modify driver code and dtschema.

Modify properties of "nuvoton,dac-vref" in dtschema. For driver code, changed dev_err() to dev_dbg().

Change:
V1 -> V2:
- Revise the driver description part for the C++ comment.
- In the nau8325_clkdet_put function, modify the max variable to hard code.
- Removed "Clock Detection" switch control.
- modify the "ALC Enable" switch name.
- Revise the dtschema for "nuvoton,dac-vref".

V2 -> V3:
- Properties use standard unit suffixes.
- Modify the enum definition.
- Driver code should be used dev_dbg().

Seven Lee (2):
ASoC: dt-bindings: Added schema for "nuvoton,nau8325"
ASoC: nau8325: new driver

 .../bindings/sound/nuvoton,nau8325.yaml       |  74 ++
 sound/soc/codecs/nau8325.c                    | 856 ++++++++++++++++++
 sound/soc/codecs/nau8325.h                    | 391 ++++++++
 3 files changed, 1321 insertions(+)
 create mode 100755 Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml
 create mode 100755 sound/soc/codecs/nau8325.c
 create mode 100644 sound/soc/codecs/nau8325.h
Signature · 1 line
2.25.1
author
#1 lore raw

PATCH v3 1/2 ASoC: dt-bindings: Added schema for "nuvoton,nau8325"

Added a DT schema for describing nau8325 audio amplifiers.

---
 .../bindings/sound/nuvoton,nau8325.yaml       | 74 +++++++++++++++++++
 1 file changed, 74 insertions(+)
 create mode 100755 Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml
Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml new file +74 -0
new file mode 100755
index 000000000000..297d29462812
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nuvoton,nau8325.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NAU8325 audio Amplifier
+
+maintainers:
+  - Seven Lee <[email protected]>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: nuvoton,nau8325
+
+  reg:
+    maxItems: 1
+
+  nuvoton,vref-impedance:
+    description:
+      VREF impedance selection.
+    enum: ["Open", "25kOhm", "125kOhm", "2.5kOhm"]
+
+
+  nuvoton,dac-vref:
+    description: DAC Reference Voltage Setting.
+    enum: ["External VDDA", "1.5V", "1.6V", "1.7V"]
+
+
+  nuvoton,alc-enable:
+    description:
+      Enable digital automatic level control (ALC) function.
+    type: boolean
+
+  nuvoton,clock-detection-disable:
+    description:
+      When clock detection is enabled, it will detect whether MCLK
+      and FS are within the range. MCLK range is from 2.048MHz to 24.576MHz.
+      FS range is from 8kHz to 96kHz. And also needs to detect the ratio
+      MCLK_SRC/LRCK of 256, 400 or 500, and needs to detect the BCLK
+      to make sure data is present. There needs to be at least 8 BCLK
+      cycles per Frame Sync.
+    type: boolean
+
+  nuvoton,clock-det-data:
+    description:
+      Request clock detection to require 2048 non-zero samples before enabling
+      the audio paths. If set then non-zero samples is required, otherwise it
+      doesn't matter.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        codec@21 {
+            compatible = "nuvoton,nau8325";
+            reg = <0x21>;
+            nuvoton,vref-impedance = "125kOhm";
+            nuvoton,dac-vref = "1.6V";
+            nuvoton,alc-enable;
+            nuvoton,clock-det-data;
+        };
+    };
Signature · 1 line
2.25.1
maintainer
#2 lore raw

Re: [PATCH v3 1/2] ASoC: dt-bindings: Added schema for "nuvoton,nau8325"

Quoted 8 lines · Seven Lee

Added a DT schema for describing nau8325 audio amplifiers.

---
 .../bindings/sound/nuvoton,nau8325.yaml       | 74 +++++++++++++++++++
 1 file changed, 74 insertions(+)
 create mode 100755 Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml:25:12: [error] string value is redundantly quoted with any quotes (quoted-strings) ./Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml:25:20: [error] string value is redundantly quoted with any quotes (quoted-strings) ./Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml:25:30: [error] string value is redundantly quoted with any quotes (quoted-strings) ./Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml:25:41: [error] string value is redundantly quoted with any quotes (quoted-strings) ./Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml:30:12: [error] string value is redundantly quoted with any quotes (quoted-strings) ./Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml:30:29: [error] string value is redundantly quoted with any quotes (quoted-strings) ./Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml:30:37: [error] string value is redundantly quoted with any quotes (quoted-strings) ./Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml:30:45: [error] string value is redundantly quoted with any quotes (quoted-strings)

dtschema/dtc warnings/errors:

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/[email protected]

The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.

maintainer
#3 lore raw

Re: [PATCH v3 1/2] ASoC: dt-bindings: Added schema for "nuvoton,nau8325"

In reply to Seven Lee
Quoted 1 line · Seven Lee

Added a DT schema for describing nau8325 audio amplifiers.

Present tense: Add a ...

Please say more about this device. Features, link to datasheet, etc.

Quoted 6 lines
---
 .../bindings/sound/nuvoton,nau8325.yaml       | 74 +++++++++++++++++++
 1 file changed, 74 insertions(+)
 create mode 100755 Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml

Schemas aren't executable. checkpatch.pl will tell you this.

Quoted 22 lines
Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml new file +15 -0
new file mode 100755
index 000000000000..297d29462812
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nuvoton,nau8325.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NAU8325 audio Amplifier
+
+maintainers:
+  - Seven Lee <[email protected]>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:

Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml line 25

Quoted 10 lines
Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml new file +10 -0
+  compatible:
+    const: nuvoton,nau8325
+
+  reg:
+    maxItems: 1
+
+  nuvoton,vref-impedance:
+    description:
+      VREF impedance selection.
+    enum: ["Open", "25kOhm", "125kOhm", "2.5kOhm"]

Use standard units (-ohms), not strings. For "open", just omit the property.

Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml line 30

Quoted 5 lines
Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml new file +5 -0
+
+
+  nuvoton,dac-vref:
+    description: DAC Reference Voltage Setting.
+    enum: ["External VDDA", "1.5V", "1.6V", "1.7V"]

Use standard units.

Quoted 47 lines
Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml new file +44 -0
+
+
+  nuvoton,alc-enable:
+    description:
+      Enable digital automatic level control (ALC) function.
+    type: boolean
+
+  nuvoton,clock-detection-disable:
+    description:
+      When clock detection is enabled, it will detect whether MCLK
+      and FS are within the range. MCLK range is from 2.048MHz to 24.576MHz.
+      FS range is from 8kHz to 96kHz. And also needs to detect the ratio
+      MCLK_SRC/LRCK of 256, 400 or 500, and needs to detect the BCLK
+      to make sure data is present. There needs to be at least 8 BCLK
+      cycles per Frame Sync.
+    type: boolean
+
+  nuvoton,clock-det-data:
+    description:
+      Request clock detection to require 2048 non-zero samples before enabling
+      the audio paths. If set then non-zero samples is required, otherwise it
+      doesn't matter.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        codec@21 {
+            compatible = "nuvoton,nau8325";
+            reg = <0x21>;
+            nuvoton,vref-impedance = "125kOhm";
+            nuvoton,dac-vref = "1.6V";
+            nuvoton,alc-enable;
+            nuvoton,clock-det-data;
+        };
+    };
Signature · 1 line
2.25.1
author
#4 lore raw

Re: [PATCH v3 1/2] ASoC: dt-bindings: Added schema for "nuvoton,nau8325"

Rob Herring 於 3/4/2024 9:37 PM 寫道:

Quoted 8 lines

CAUTION - External Email: Do not click links or open attachments unless you acknowledge the sender and content.

Quoted 1 line · Seven Lee

Added a DT schema for describing nau8325 audio amplifiers.

Present tense: Add a ...

Please say more about this device. Features, link to datasheet, etc.

okay. I will.

Quoted 7 lines
Quoted 6 lines
---
  .../bindings/sound/nuvoton,nau8325.yaml       | 74 +++++++++++++++++++
  1 file changed, 74 insertions(+)

create mode 100755 Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml

Schemas aren't executable. checkpatch.pl will tell you this.

okay, I will use the checkpatch.pl.

Quoted 26 lines
Quoted 26 lines
Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml new file +19 -0
new file mode 100755
index 000000000000..297d29462812
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nuvoton,nau8325.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NAU8325 audio Amplifier
+
+maintainers:
+  - Seven Lee <[email protected]>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: nuvoton,nau8325
+
+  reg:
Quoted 8 lines

Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml line 25

Quoted 6 lines
Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml new file +6 -0
+    maxItems: 1
+
+  nuvoton,vref-impedance:
+    description:
+      VREF impedance selection.
+    enum: ["Open", "25kOhm", "125kOhm", "2.5kOhm"]

Use standard units (-ohms), not strings. For "open", just omit the property.

okay, I will.

Quoted 7 lines

Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml line 30

Quoted 6 lines
Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml new file +5 -0
+
+
+  nuvoton,dac-vref:
+    description: DAC Reference Voltage Setting.
+    enum: ["External VDDA", "1.5V", "1.6V", "1.7V"]

Use standard units.

okay, I will use standard units.

Quoted 40 lines
Quoted 40 lines
Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml new file +39 -0
+
+
+  nuvoton,alc-enable:
+    description:
+      Enable digital automatic level control (ALC) function.
+    type: boolean
+
+  nuvoton,clock-detection-disable:
+    description:
+      When clock detection is enabled, it will detect whether MCLK
+      and FS are within the range. MCLK range is from 2.048MHz to 24.576MHz.
+      FS range is from 8kHz to 96kHz. And also needs to detect the ratio
+      MCLK_SRC/LRCK of 256, 400 or 500, and needs to detect the BCLK
+      to make sure data is present. There needs to be at least 8 BCLK
+      cycles per Frame Sync.
+    type: boolean
+
+  nuvoton,clock-det-data:
+    description:
+      Request clock detection to require 2048 non-zero samples before enabling
+      the audio paths. If set then non-zero samples is required, otherwise it
+      doesn't matter.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        codec@21 {
+            compatible = "nuvoton,nau8325";
+            reg = <0x21>;
+            nuvoton,vref-impedance = "125kOhm";
Quoted 8 lines
Quoted 8 lines
Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml new file +5 -1
+            nuvoton,dac-vref = "1.6V";
+            nuvoton,alc-enable;
+            nuvoton,clock-det-data;
+        };
+    };
--

2.25.1

________________________________
________________________________
The privileged confidential information contained in this email is intended for use only by the addressees as indicated by the original sender of this email. If you are not the addressee indicated in this email or are not responsible for delivery of the email to such a person, please kindly reply to the sender indicating this fact and delete all copies of it from your computer and network server immediately. Your cooperation is highly appreciated. It is advised that any unauthorized use of confidential information of Nuvoton is strictly prohibited; and any information in this email irrelevant to the official business of Nuvoton shall be deemed as neither given nor endorsed by Nuvoton.

author
#5 lore raw

Re: [PATCH v3 1/2] ASoC: dt-bindings: Added schema for "nuvoton,nau8325"

In reply to Rob Herring

Rob Herring 於 3/4/2024 9:37 PM 寫道:

Quoted 8 lines

CAUTION - External Email: Do not click links or open attachments unless you acknowledge the sender and content.

Quoted 1 line · Seven Lee

Added a DT schema for describing nau8325 audio amplifiers.

Present tense: Add a ...

Please say more about this device. Features, link to datasheet, etc.

Are the following revisions correct?
Add a DT schema for describing nau8325 audio amplifiers. The key features are as follows:
- Low SPK_VDD Quiescent Current
- Gain Setting with 2-wire interface
- Powerful Stereo Class-D Amplifier
- Low Output Noise
- Low Current Shutdown Mode
- Click-and Pop Suppression

More resources :
https://www.nuvoton.com/products/smart-home-audio/audio-amplifiers/class-d-series/nau8325yg/

Quoted 7 lines
Quoted 6 lines
---
  .../bindings/sound/nuvoton,nau8325.yaml       | 74 +++++++++++++++++++
  1 file changed, 74 insertions(+)

create mode 100755 Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml

Schemas aren't executable. checkpatch.pl will tell you this.

yes, I will.

Quoted 26 lines
Quoted 26 lines
Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml new file +19 -0
new file mode 100755
index 000000000000..297d29462812
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nuvoton,nau8325.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NAU8325 audio Amplifier
+
+maintainers:
+  - Seven Lee <[email protected]>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: nuvoton,nau8325
+
+  reg:
Quoted 8 lines

Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml line 25

Quoted 6 lines
Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml new file +6 -0
+    maxItems: 1
+
+  nuvoton,vref-impedance:
+    description:
+      VREF impedance selection.
+    enum: ["Open", "25kOhm", "125kOhm", "2.5kOhm"]

Use standard units (-ohms), not strings. For "open", just omit the property.

Is the description of the following modification correct? nuvoton,vref-impedance:
$ref: /schemas/types.yaml#/definitions/uint32
description:
The vref impedance to be used in KOhms. Voltage Reference impedance selection. VREF impedance selection.
enum:
- 0 # Disable tie off resistance
- 1 # 25KOhms
- 2 # 125KOhms
- 3 # 2.5kOhms
default: 2

Quoted 7 lines

Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml line 30

Quoted 6 lines
Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml new file +5 -0
+
+
+  nuvoton,dac-vref:
+    description: DAC Reference Voltage Setting.
+    enum: ["External VDDA", "1.5V", "1.6V", "1.7V"]

Use standard units.

Is the description of the following modification correct?
nuvoton,dac-vref:
$ref: /schemas/types.yaml#/definitions/uint32
description:
The dac vref to be used in voltage. DAC reference voltage setting.
enum:
- 0 # VDDA
- 1 # VDDA*1.5
- 2 # VDDA*1.6
- 3 # VDDA*1.7
default: 2

Quoted 40 lines
Quoted 40 lines
Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml new file +39 -0
+
+
+  nuvoton,alc-enable:
+    description:
+      Enable digital automatic level control (ALC) function.
+    type: boolean
+
+  nuvoton,clock-detection-disable:
+    description:
+      When clock detection is enabled, it will detect whether MCLK
+      and FS are within the range. MCLK range is from 2.048MHz to 24.576MHz.
+      FS range is from 8kHz to 96kHz. And also needs to detect the ratio
+      MCLK_SRC/LRCK of 256, 400 or 500, and needs to detect the BCLK
+      to make sure data is present. There needs to be at least 8 BCLK
+      cycles per Frame Sync.
+    type: boolean
+
+  nuvoton,clock-det-data:
+    description:
+      Request clock detection to require 2048 non-zero samples before enabling
+      the audio paths. If set then non-zero samples is required, otherwise it
+      doesn't matter.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        codec@21 {
+            compatible = "nuvoton,nau8325";
+            reg = <0x21>;
+            nuvoton,vref-impedance = "125kOhm";
Quoted 8 lines
Quoted 8 lines
Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml new file +5 -1
+            nuvoton,dac-vref = "1.6V";
+            nuvoton,alc-enable;
+            nuvoton,clock-det-data;
+        };
+    };
--

2.25.1

________________________________
________________________________
The privileged confidential information contained in this email is intended for use only by the addressees as indicated by the original sender of this email. If you are not the addressee indicated in this email or are not responsible for delivery of the email to such a person, please kindly reply to the sender indicating this fact and delete all copies of it from your computer and network server immediately. Your cooperation is highly appreciated. It is advised that any unauthorized use of confidential information of Nuvoton is strictly prohibited; and any information in this email irrelevant to the official business of Nuvoton shall be deemed as neither given nor endorsed by Nuvoton.

author
#6 lore raw

PATCH v3 2/2 ASoC: nau8325: new driver

In reply to Seven Lee

The driver is for amplifiers NAU8325 of Nuvoton Technology Corporation. The NAU8325 is a stereo high efficiency filter-free Class-D audio amplifier, which is capable of driving a 4ohm load with up to 3W output power.

---
 sound/soc/codecs/nau8325.c | 856 +++++++++++++++++++++++++++++++++++++
 sound/soc/codecs/nau8325.h | 391 +++++++++++++++++
 2 files changed, 1247 insertions(+)
 create mode 100755 sound/soc/codecs/nau8325.c
 create mode 100644 sound/soc/codecs/nau8325.h
sound/soc/codecs/nau8325.c new file +856 -0
new file mode 100755
index 000000000000..93dee6dc1ee4
@@ -0,0 +1,856 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// nau8325.c -- Nuvoton NAU8325 audio codec driver
+//
+// Copyright 2023 Nuvoton Technology Crop.
+// Author: Seven Lee <[email protected]>
+//	   David Lin <[email protected]>
+//
+
+#include <linux/clk.h>
+#include <sound/core.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <sound/initval.h>
+#include <linux/module.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <sound/soc.h>
+#include <sound/tlv.h>
+#include "nau8325.h"
+
+/* Range of Master Clock MCLK (Hz) */
+#define MASTER_CLK_MAX 49152000
+#define MASTER_CLK_MIN 2048000
+
+/* scaling for MCLK source */
+#define CLK_PROC_BYPASS (-1)
+
+/* the maximum CLK_DAC */
+#define CLK_DA_AD_MAX 6144000
+
+/* from MCLK input */
+#define MCLK_SRC 4
+
+static const struct nau8325_src_attr mclk_n1_div[] = {
+	{ 1, 0x0 },
+	{ 2, 0x1 },
+	{ 3, 0x2 },
+};
+
+/* over sampling rate */
+static const struct nau8325_osr_attr osr_dac_sel[] = {
+	{ 64, 2 },	/* OSR 64, SRC 1/4 */
+	{ 256, 0 },	/* OSR 256, SRC 1 */
+	{ 128, 1 },	/* OSR 128, SRC 1/2 */
+	{ 0, 0 },
+	{ 32, 3 },	/* OSR 32, SRC 1/8 */
+};
+
+static const struct nau8325_src_attr mclk_n2_div[] = {
+	{ 0, 0x0 },
+	{ 1, 0x1 },
+	{ 2, 0x2 },
+	{ 3, 0x3 },
+	{ 4, 0x4 },
+};
+
+static const struct nau8325_src_attr mclk_n3_mult[] = {
+	{ 0, 0x1 },
+	{ 1, 0x2 },
+	{ 2, 0x3 },
+	{ 3, 0x4 },
+};
+
+/* Sample Rate and MCLK_SRC selections */
+static const struct nau8325_srate_attr target_srate_table[] = {
+	/* { FS, range, max, { MCLK source }} */
+	{ 48000, 2, true, { 12288000, 19200000, 24000000 } },
+	{ 16000, 1, false, { 4096000, 6400000, 8000000 } },
+	{ 8000, 0, false, { 2048000, 3200000, 4000000 }},
+	{ 44100, 2, true, { 11289600, 17640000, 22050000 }},
+	{ 64000, 3, false, { 16384000, 25600000, 32000000 } },
+	{ 96000, 3, true, { 24576000, 38400000, 48000000 } },
+	{ 12000, 0, true, { 3072000, 4800000, 6000000 } },
+	{ 24000, 1, true, { 6144000, 9600000, 12000000 } },
+	{ 32000, 2, false, { 8192000, 12800000, 16000000 } },
+};
+
+static const struct reg_default nau8325_reg_defaults[] = {
+	{ NAU8325_R00_HARDWARE_RST, 0x0000 },
+	{ NAU8325_R01_SOFTWARE_RST, 0x0000 },
+	{ NAU8325_R03_CLK_CTRL, 0x0000 },
+	{ NAU8325_R04_ENA_CTRL, 0x0000 },
+	{ NAU8325_R05_INTERRUPT_CTRL, 0x007f },
+	{ NAU8325_R09_IRQOUT, 0x0000 },
+	{ NAU8325_R0A_IO_CTRL, 0x0000 },
+	{ NAU8325_R0B_PDM_CTRL, 0x0000 },
+	{ NAU8325_R0C_TDM_CTRL, 0x0000 },
+	{ NAU8325_R0D_I2S_PCM_CTRL1, 0x000a },
+	{ NAU8325_R0E_I2S_PCM_CTRL2, 0x0000 },
+	{ NAU8325_R0F_L_TIME_SLOT, 0x0000 },
+	{ NAU8325_R10_R_TIME_SLOT, 0x0000 },
+	{ NAU8325_R11_HPF_CTRL, 0x0000 },
+	{ NAU8325_R12_MUTE_CTRL, 0x0000 },
+	{ NAU8325_R13_DAC_VOLUME, 0xf3f3 },
+	{ NAU8325_R29_DAC_CTRL1, 0x0081 },
+	{ NAU8325_R2A_DAC_CTRL2, 0x0000 },
+	{ NAU8325_R2C_ALC_CTRL1, 0x000e },
+	{ NAU8325_R2D_ALC_CTRL2, 0x8400 },
+	{ NAU8325_R2E_ALC_CTRL3, 0x0000 },
+	{ NAU8325_R2F_ALC_CTRL4, 0x003f },
+	{ NAU8325_R40_CLK_DET_CTRL, 0xa801 },
+	{ NAU8325_R50_MIXER_CTRL, 0x0000 },
+	{ NAU8325_R55_MISC_CTRL, 0x0000 },
+	{ NAU8325_R60_BIAS_ADJ, 0x0000 },
+	{ NAU8325_R61_ANALOG_CONTROL_1, 0x0000 },
+	{ NAU8325_R62_ANALOG_CONTROL_2, 0x0000 },
+	{ NAU8325_R63_ANALOG_CONTROL_3, 0x0000 },
+	{ NAU8325_R64_ANALOG_CONTROL_4, 0x0000 },
+	{ NAU8325_R65_ANALOG_CONTROL_5, 0x0000 },
+	{ NAU8325_R66_ANALOG_CONTROL_6, 0x0000 },
+	{ NAU8325_R69_CLIP_CTRL, 0x0000 },
+	{ NAU8325_R73_RDAC, 0x0008 },
+};
+
+static bool nau8325_readable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case NAU8325_R02_DEVICE_ID ... NAU8325_R06_INT_CLR_STATUS:
+	case NAU8325_R09_IRQOUT ... NAU8325_R13_DAC_VOLUME:
+	case NAU8325_R1D_DEBUG_READ1:
+	case NAU8325_R1F_DEBUG_READ2:
+	case NAU8325_R22_DEBUG_READ3:
+	case NAU8325_R29_DAC_CTRL1 ... NAU8325_R2A_DAC_CTRL2:
+	case NAU8325_R2C_ALC_CTRL1 ... NAU8325_R2F_ALC_CTRL4:
+	case NAU8325_R40_CLK_DET_CTRL:
+	case NAU8325_R49_TEST_STATUS ... NAU8325_R4A_ANALOG_READ:
+	case NAU8325_R50_MIXER_CTRL:
+	case NAU8325_R55_MISC_CTRL:
+	case NAU8325_R60_BIAS_ADJ ... NAU8325_R66_ANALOG_CONTROL_6:
+	case NAU8325_R69_CLIP_CTRL:
+	case NAU8325_R73_RDAC:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool nau8325_writeable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case NAU8325_R00_HARDWARE_RST:
+	case NAU8325_R03_CLK_CTRL ... NAU8325_R06_INT_CLR_STATUS:
+	case NAU8325_R09_IRQOUT ... NAU8325_R13_DAC_VOLUME:
+	case NAU8325_R29_DAC_CTRL1 ... NAU8325_R2A_DAC_CTRL2:
+	case NAU8325_R2C_ALC_CTRL1 ... NAU8325_R2F_ALC_CTRL4:
+	case NAU8325_R40_CLK_DET_CTRL:
+	case NAU8325_R50_MIXER_CTRL:
+	case NAU8325_R55_MISC_CTRL:
+	case NAU8325_R60_BIAS_ADJ ... NAU8325_R66_ANALOG_CONTROL_6:
+	case NAU8325_R69_CLIP_CTRL:
+	case NAU8325_R73_RDAC:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool nau8325_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case NAU8325_R00_HARDWARE_RST ... NAU8325_R02_DEVICE_ID:
+	case NAU8325_R06_INT_CLR_STATUS:
+	case NAU8325_R1D_DEBUG_READ1:
+	case NAU8325_R1F_DEBUG_READ2:
+	case NAU8325_R22_DEBUG_READ3:
+	case NAU8325_R4A_ANALOG_READ:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const char * const nau8325_dac_oversampl[] = {
+	"64", "256", "128", "", "32" };
+
+static const struct soc_enum nau8325_dac_oversampl_enum =
+	SOC_ENUM_SINGLE(NAU8325_R29_DAC_CTRL1, NAU8325_DAC_OVERSAMPLE_SFT,
+			ARRAY_SIZE(nau8325_dac_oversampl),
+			nau8325_dac_oversampl);
+
+static const DECLARE_TLV_DB_MINMAX_MUTE(dac_vol_tlv, -8000, 600);
+
+static const struct snd_kcontrol_new nau8325_snd_controls[] = {
+	SOC_ENUM("DAC Oversampling Rate", nau8325_dac_oversampl_enum),
+	SOC_DOUBLE_TLV("Speaker Volume", NAU8325_R13_DAC_VOLUME,
+		       NAU8325_DAC_VOLUME_L_SFT, NAU8325_DAC_VOLUME_R_SFT,
+		       NAU8325_DAC_VOLUME_R_EN, 0, dac_vol_tlv),
+	SOC_SINGLE("ALC Max Gain", NAU8325_R2C_ALC_CTRL1,
+		   NAU8325_ALC_MAXGAIN_SFT, NAU8325_ALC_MAXGAIN_MAX, 0),
+	SOC_SINGLE("ALC Min Gain", NAU8325_R2C_ALC_CTRL1,
+		   NAU8325_ALC_MINGAIN_SFT, NAU8325_ALC_MINGAIN_MAX, 0),
+	SOC_SINGLE("ALC Decay Timer", NAU8325_R2D_ALC_CTRL2,
+		   NAU8325_ALC_DCY_SFT, NAU8325_ALC_DCY_MAX, 0),
+	SOC_SINGLE("ALC Attack Timer", NAU8325_R2D_ALC_CTRL2,
+		   NAU8325_ALC_ATK_SFT, NAU8325_ALC_ATK_MAX, 0),
+	SOC_SINGLE("ALC Hold Time", NAU8325_R2D_ALC_CTRL2,
+		   NAU8325_ALC_HLD_SFT, NAU8325_ALC_HLD_MAX, 0),
+	SOC_SINGLE("ALC Target Level", NAU8325_R2D_ALC_CTRL2,
+		   NAU8325_ALC_LVL_SFT, NAU8325_ALC_LVL_MAX, 0),
+	SOC_SINGLE("ALC Enable Switch", NAU8325_R2E_ALC_CTRL3,
+		   NAU8325_ALC_EN_SFT, 1, 0),
+};
+
+static int nau8325_dac_event(struct snd_soc_dapm_widget *w,
+			     struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_component *component =
+		snd_soc_dapm_to_component(w->dapm);
+	struct nau8325 *nau8325 = snd_soc_component_get_drvdata(component);
+
+	switch (event) {
+	case SND_SOC_DAPM_POST_PMU:
+		regmap_update_bits(nau8325->regmap, NAU8325_R12_MUTE_CTRL,
+				   NAU8325_SOFT_MUTE, 0);
+		msleep(30);
+		break;
+	case SND_SOC_DAPM_PRE_PMD:
+		/* Soft mute the output to prevent the pop noise. */
+		regmap_update_bits(nau8325->regmap, NAU8325_R12_MUTE_CTRL,
+				   NAU8325_SOFT_MUTE, NAU8325_SOFT_MUTE);
+		msleep(30);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int nau8325_powerup_event(struct snd_soc_dapm_widget *w,
+				 struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_component *component =
+		snd_soc_dapm_to_component(w->dapm);
+	struct nau8325 *nau8325 = snd_soc_component_get_drvdata(component);
+
+	if (nau8325->clock_detection)
+		return 0;
+
+	switch (event) {
+	case SND_SOC_DAPM_POST_PMU:
+		regmap_update_bits(nau8325->regmap, NAU8325_R40_CLK_DET_CTRL,
+				   NAU8325_PWRUP_DFT, NAU8325_PWRUP_DFT);
+		break;
+	case SND_SOC_DAPM_POST_PMD:
+		regmap_update_bits(nau8325->regmap, NAU8325_R40_CLK_DET_CTRL,
+				   NAU8325_PWRUP_DFT, 0);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct snd_soc_dapm_widget nau8325_dapm_widgets[] = {
+	SND_SOC_DAPM_SUPPLY("Power Up", SND_SOC_NOPM, 0, 0,
+			    nau8325_powerup_event, SND_SOC_DAPM_POST_PMU |
+			    SND_SOC_DAPM_POST_PMD),
+	SND_SOC_DAPM_DAC_E("DACL", NULL, NAU8325_R04_ENA_CTRL,
+			   NAU8325_DAC_LEFT_CH_EN_SFT, 0, nau8325_dac_event,
+			   SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+	SND_SOC_DAPM_DAC_E("DACR", NULL, NAU8325_R04_ENA_CTRL,
+			   NAU8325_DAC_RIGHT_CH_EN_SFT, 0, nau8325_dac_event,
+			   SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+	SND_SOC_DAPM_AIF_IN("AIFRX", "Playback", 0, SND_SOC_NOPM, 0, 0),
+
+	SND_SOC_DAPM_OUTPUT("SPKL"),
+	SND_SOC_DAPM_OUTPUT("SPKR"),
+};
+
+static const struct snd_soc_dapm_route nau8325_dapm_routes[] = {
+	{ "DACL", NULL, "Power Up" },
+	{ "DACR", NULL, "Power Up" },
+
+	{ "DACL", NULL, "AIFRX" },
+	{ "DACR", NULL, "AIFRX" },
+	{ "SPKL", NULL, "DACL" },
+	{ "SPKR", NULL, "DACR" },
+};
+
+static int nau8325_srate_clk_apply(struct nau8325 *nau8325,
+				   const struct nau8325_srate_attr *srate_table,
+				   int n1_sel, int mclk_mult_sel, int n2_sel)
+{
+	if (!srate_table || n2_sel < 0 || n2_sel >= ARRAY_SIZE(mclk_n2_div) ||
+	    n1_sel < 0 || n1_sel >= ARRAY_SIZE(mclk_n1_div)) {
+		dev_dbg(nau8325->dev, "The CLK isn't supported.");
+		return -EINVAL;
+	}
+
+	regmap_update_bits(nau8325->regmap, NAU8325_R40_CLK_DET_CTRL,
+			   NAU8325_REG_SRATE_MASK | NAU8325_REG_DIV_MAX,
+			   (srate_table->range << NAU8325_REG_SRATE_SFT) |
+			   (srate_table->max ? NAU8325_REG_DIV_MAX : 0));
+	regmap_update_bits(nau8325->regmap, NAU8325_R03_CLK_CTRL,
+			   NAU8325_MCLK_SRC_MASK, mclk_n2_div[n2_sel].val);
+	regmap_update_bits(nau8325->regmap, NAU8325_R03_CLK_CTRL,
+			   NAU8325_CLK_MUL_SRC_MASK,
+			   mclk_n1_div[n1_sel].val << NAU8325_CLK_MUL_SRC_SFT);
+
+	if (mclk_mult_sel != CLK_PROC_BYPASS) {
+		regmap_update_bits(nau8325->regmap, NAU8325_R03_CLK_CTRL,
+				   NAU8325_MCLK_SEL_MASK,
+				   mclk_n3_mult[mclk_mult_sel].val <<
+				   NAU8325_MCLK_SEL_SFT);
+	} else {
+		regmap_update_bits(nau8325->regmap, NAU8325_R03_CLK_CTRL,
+				   NAU8325_MCLK_SEL_MASK, 0);
+	}
+
+	switch (mclk_mult_sel) {
+	case 2:
+		regmap_update_bits(nau8325->regmap, NAU8325_R65_ANALOG_CONTROL_5,
+				   NAU8325_MCLK4XEN_EN, NAU8325_MCLK4XEN_EN);
+		break;
+	case 3:
+		regmap_update_bits(nau8325->regmap, NAU8325_R65_ANALOG_CONTROL_5,
+				   NAU8325_MCLK4XEN_EN | NAU8325_MCLK8XEN_EN,
+				   NAU8325_MCLK4XEN_EN | NAU8325_MCLK8XEN_EN);
+		break;
+	default:
+		regmap_update_bits(nau8325->regmap, NAU8325_R65_ANALOG_CONTROL_5,
+				   NAU8325_MCLK4XEN_EN | NAU8325_MCLK8XEN_EN, 0);
+		break;
+	}
+
+	return 0;
+}
+
+static int nau8325_clksrc_n2(struct nau8325 *nau8325,
+			     const struct nau8325_srate_attr *srate_table,
+			     int mclk, int *n2_sel)
+{
+	int i, mclk_src, ratio;
+
+	ratio = NAU8325_MCLK_FS_RATIO_NUM;
+	for (i = 0; i < ARRAY_SIZE(mclk_n2_div); i++) {
+		mclk_src = mclk >> mclk_n2_div[i].param;
+		if (srate_table->mclk_src[NAU8325_MCLK_FS_RATIO_256] == mclk_src) {
+			ratio = NAU8325_MCLK_FS_RATIO_256;
+			break;
+		} else if (srate_table->mclk_src[NAU8325_MCLK_FS_RATIO_400] == mclk_src) {
+			ratio = NAU8325_MCLK_FS_RATIO_400;
+			break;
+		} else if (srate_table->mclk_src[NAU8325_MCLK_FS_RATIO_500] == mclk_src) {
+			ratio = NAU8325_MCLK_FS_RATIO_500;
+			break;
+		}
+	}
+	if (ratio != NAU8325_MCLK_FS_RATIO_NUM)
+		*n2_sel = i;
+
+	return ratio;
+}
+
+static const struct nau8325_srate_attr *target_srate_attribute(int srate)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(target_srate_table); i++)
+		if (target_srate_table[i].fs == srate)
+			break;
+
+	if (i == ARRAY_SIZE(target_srate_table))
+		goto proc_err;
+
+	return &target_srate_table[i];
+
+proc_err:
+	return NULL;
+}
+
+static int nau8325_clksrc_choose(struct nau8325 *nau8325,
+				 const struct nau8325_srate_attr **srate_table,
+				 int *n1_sel, int *mult_sel, int *n2_sel)
+{
+	int i, j, mclk, mclk_max, ratio, ratio_sel, n2_max;
+
+	if (!nau8325->mclk || !nau8325->fs)
+		goto proc_err;
+
+	/* select sampling rate and MCLK_SRC */
+	*srate_table = target_srate_attribute(nau8325->fs);
+	if (!*srate_table)
+		goto proc_err;
+
+	/* First check clock from MCLK directly, decide N2 for MCLK_SRC.
+	 * If not good, consider 1/N1 and Multiplier.
+	 */
+	ratio = nau8325_clksrc_n2(nau8325, *srate_table, nau8325->mclk, n2_sel);
+	if (ratio != NAU8325_MCLK_FS_RATIO_NUM) {
+		*n1_sel = 0;
+		*mult_sel = CLK_PROC_BYPASS;
+		*n2_sel = MCLK_SRC;
+		goto proc_done;
+	}
+
+	/* Get MCLK_SRC through 1/N, Multiplier, and then 1/N2. */
+	mclk_max = 0;
+	for (i = 0; i < ARRAY_SIZE(mclk_n1_div); i++) {
+		for (j = 0; j < ARRAY_SIZE(mclk_n3_mult); j++) {
+			mclk = nau8325->mclk << mclk_n3_mult[j].param;
+			mclk = mclk / mclk_n1_div[i].param;
+			ratio = nau8325_clksrc_n2(nau8325,
+						  *srate_table, mclk, n2_sel);
+			if (ratio != NAU8325_MCLK_FS_RATIO_NUM &&
+			    (mclk_max < mclk || i > *n1_sel)) {
+				mclk_max = mclk;
+				n2_max = *n2_sel;
+				*n1_sel = i;
+				*mult_sel = j;
+				ratio_sel = ratio;
+					goto proc_done;
+			}
+		}
+	}
+	if (mclk_max) {
+		*n2_sel = n2_max;
+		ratio = ratio_sel;
+		goto proc_done;
+	}
+
+proc_err:
+	dev_dbg(nau8325->dev, "The MCLK %d is invalid. It can't get MCLK_SRC of 256/400/500 FS (%d)",
+		nau8325->mclk, nau8325->fs);
+	return -EINVAL;
+proc_done:
+	dev_dbg(nau8325->dev, "nau8325->fs=%d,range=0x%x, %s, (n1,mu,n2,dmu):(%d,%d,%d), MCLK_SRC=%uHz (%d)",
+		nau8325->fs, (*srate_table)->range,
+		(*srate_table)->max ? "MAX" : "MIN",
+		*n1_sel == CLK_PROC_BYPASS ?
+		CLK_PROC_BYPASS : mclk_n1_div[*n1_sel].param,
+		*mult_sel == CLK_PROC_BYPASS ?
+		CLK_PROC_BYPASS : 1 << mclk_n3_mult[*mult_sel].param,
+		1 << mclk_n2_div[*n2_sel].param,
+		(*srate_table)->mclk_src[ratio],
+		(*srate_table)->mclk_src[ratio] / nau8325->fs);
+
+	return 0;
+}
+
+static int nau8325_clock_config(struct nau8325 *nau8325)
+{
+	const struct nau8325_srate_attr *srate_table;
+	int ret, n1_sel, mult_sel, n2_sel;
+
+	ret = nau8325_clksrc_choose(nau8325, &srate_table,
+				    &n1_sel, &mult_sel, &n2_sel);
+	if (ret)
+		goto err;
+
+	ret = nau8325_srate_clk_apply(nau8325, srate_table,
+				      n1_sel, mult_sel, n2_sel);
+	if (ret)
+		goto err;
+
+	return 0;
+err:
+	return ret;
+}
+
+static const struct nau8325_osr_attr *nau8325_get_osr(struct nau8325 *nau8325)
+{
+	unsigned int osr;
+
+	regmap_read(nau8325->regmap, NAU8325_R29_DAC_CTRL1, &osr);
+	osr &= NAU8325_DAC_OVERSAMPLE_MASK;
+	if (osr >= ARRAY_SIZE(osr_dac_sel))
+		return NULL;
+
+	return &osr_dac_sel[osr];
+}
+
+static int nau8325_dai_startup(struct snd_pcm_substream *substream,
+			       struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	struct nau8325 *nau8325 = snd_soc_component_get_drvdata(component);
+	const struct nau8325_osr_attr *osr;
+
+	osr = nau8325_get_osr(nau8325);
+	if (!osr || !osr->osr)
+		return -EINVAL;
+
+	return snd_pcm_hw_constraint_minmax(substream->runtime,
+					    SNDRV_PCM_HW_PARAM_RATE,
+					    0, CLK_DA_AD_MAX / osr->osr);
+}
+
+static int nau8325_hw_params(struct snd_pcm_substream *substream,
+			     struct snd_pcm_hw_params *params,
+			     struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	struct nau8325 *nau8325 = snd_soc_component_get_drvdata(component);
+	unsigned int val_len = 0;
+	const struct nau8325_osr_attr *osr;
+	int ret;
+
+	nau8325->fs = params_rate(params);
+	osr = nau8325_get_osr(nau8325);
+	if (!osr || !osr->osr || nau8325->fs * osr->osr > CLK_DA_AD_MAX) {
+		ret = -EINVAL;
+		goto err;
+	}
+	regmap_update_bits(nau8325->regmap, NAU8325_R03_CLK_CTRL,
+			   NAU8325_CLK_DAC_SRC_MASK,
+			   osr->clk_src << NAU8325_CLK_DAC_SRC_SFT);
+
+	ret = nau8325_clock_config(nau8325);
+	if (ret)
+		goto err;
+
+	switch (params_width(params)) {
+	case 16:
+		val_len |= NAU8325_I2S_DL_16;
+		break;
+	case 20:
+		val_len |= NAU8325_I2S_DL_20;
+		break;
+	case 24:
+		val_len |= NAU8325_I2S_DL_24;
+		break;
+	case 32:
+		val_len |= NAU8325_I2S_DL_32;
+		break;
+	default:
+		ret = -EINVAL;
+		goto err;
+	}
+
+	regmap_update_bits(nau8325->regmap, NAU8325_R0D_I2S_PCM_CTRL1,
+			   NAU8325_I2S_DL_MASK, val_len);
+
+	return 0;
+
+err:
+	return ret;
+}
+
+static int nau8325_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
+{
+	struct snd_soc_component *component = dai->component;
+	struct nau8325 *nau8325 = snd_soc_component_get_drvdata(component);
+	unsigned int ctrl1_val = 0;
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBC_CFC:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		ctrl1_val |= NAU8325_I2S_BP_INV;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		ctrl1_val |= NAU8325_I2S_DF_I2S;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		ctrl1_val |= NAU8325_I2S_DF_LEFT;
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		ctrl1_val |= NAU8325_I2S_DF_RIGTH;
+		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		ctrl1_val |= NAU8325_I2S_DF_PCM_AB;
+		break;
+	case SND_SOC_DAIFMT_DSP_B:
+		ctrl1_val |= NAU8325_I2S_DF_PCM_AB;
+		ctrl1_val |= NAU8325_I2S_PCMB_EN;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	regmap_update_bits(nau8325->regmap, NAU8325_R0D_I2S_PCM_CTRL1,
+			   NAU8325_I2S_DF_MASK | NAU8325_I2S_BP_MASK |
+			   NAU8325_I2S_PCMB_EN, ctrl1_val);
+
+	return 0;
+}
+
+static int nau8325_set_sysclk(struct snd_soc_component *component, int clk_id,
+			      int source, unsigned int freq, int dir)
+{
+	struct nau8325 *nau8325 = snd_soc_component_get_drvdata(component);
+
+	if (freq < MASTER_CLK_MIN || freq > MASTER_CLK_MAX) {
+		dev_dbg(nau8325->dev, "MCLK exceeds the range, MCLK:%d", freq);
+		return -EINVAL;
+	}
+
+	nau8325->mclk = freq;
+	dev_dbg(nau8325->dev, "MCLK %dHz", nau8325->mclk);
+
+	return 0;
+}
+
+static const struct snd_soc_component_driver nau8325_component_driver = {
+	.set_sysclk = nau8325_set_sysclk,
+	.suspend_bias_off = true,
+	.controls = nau8325_snd_controls,
+	.num_controls = ARRAY_SIZE(nau8325_snd_controls),
+	.dapm_widgets = nau8325_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(nau8325_dapm_widgets),
+	.dapm_routes = nau8325_dapm_routes,
+	.num_dapm_routes = ARRAY_SIZE(nau8325_dapm_routes),
+};
+
+static const struct snd_soc_dai_ops nau8325_dai_ops = {
+	.startup = nau8325_dai_startup,
+	.hw_params = nau8325_hw_params,
+	.set_fmt = nau8325_set_fmt,
+};
+
+#define NAU8325_RATES SNDRV_PCM_RATE_8000_96000
+#define NAU8325_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE \
+	 | SNDRV_PCM_FMTBIT_S24_3LE)
+
+static struct snd_soc_dai_driver nau8325_dai = {
+	.name = NAU8325_CODEC_DAI,
+	.playback = {
+		.stream_name = "Playback",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = NAU8325_RATES,
+		.formats = NAU8325_FORMATS,
+	},
+	.ops = &nau8325_dai_ops,
+};
+
+static const struct regmap_config nau8325_regmap_config = {
+	.reg_bits = NAU8325_REG_ADDR_LEN,
+	.val_bits = NAU8325_REG_DATA_LEN,
+
+	.max_register = NAU8325_REG_MAX,
+	.readable_reg = nau8325_readable_reg,
+	.writeable_reg = nau8325_writeable_reg,
+	.volatile_reg = nau8325_volatile_reg,
+
+	.cache_type = REGCACHE_RBTREE,
+	.reg_defaults = nau8325_reg_defaults,
+	.num_reg_defaults = ARRAY_SIZE(nau8325_reg_defaults),
+};
+
+static void nau8325_reset_chip(struct regmap *regmap)
+{
+	regmap_write(regmap, NAU8325_R00_HARDWARE_RST, 0x0001);
+	regmap_write(regmap, NAU8325_R00_HARDWARE_RST, 0x0000);
+}
+
+static void nau8325_init_regs(struct nau8325 *nau8325)
+{
+	struct regmap *regmap = nau8325->regmap;
+
+	/* set ALC parameters */
+	regmap_update_bits(regmap, NAU8325_R2C_ALC_CTRL1,
+			   NAU8325_ALC_MAXGAIN_MASK,
+			   0x7 << NAU8325_ALC_MAXGAIN_SFT);
+	regmap_update_bits(regmap, NAU8325_R2D_ALC_CTRL2,
+			   NAU8325_ALC_DCY_MASK | NAU8325_ALC_ATK_MASK |
+			   NAU8325_ALC_HLD_MASK, (0x5 << NAU8325_ALC_DCY_SFT) |
+			   (0x3 << NAU8325_ALC_ATK_SFT) |
+			   (0x5 << NAU8325_ALC_HLD_SFT));
+	/* Enable ALC to avoid signal distortion when battery low. */
+	if (nau8325->alc_enable)
+		regmap_update_bits(regmap, NAU8325_R2E_ALC_CTRL3,
+				   NAU8325_ALC_EN, NAU8325_ALC_EN);
+	if (nau8325->clock_detection)
+		regmap_update_bits(regmap, NAU8325_R40_CLK_DET_CTRL,
+				   NAU8325_CLKPWRUP_DIS |
+				   NAU8325_PWRUP_DFT, 0);
+	else
+		regmap_update_bits(regmap, NAU8325_R40_CLK_DET_CTRL,
+				   NAU8325_CLKPWRUP_DIS | NAU8325_PWRUP_DFT,
+				   NAU8325_CLKPWRUP_DIS);
+	if (nau8325->clock_det_data)
+		regmap_update_bits(regmap, NAU8325_R40_CLK_DET_CTRL,
+				   NAU8325_APWRUP_EN, NAU8325_APWRUP_EN);
+	else
+		regmap_update_bits(regmap, NAU8325_R40_CLK_DET_CTRL,
+				   NAU8325_APWRUP_EN, 0);
+
+	/* DAC Reference Voltage Setting */
+	regmap_update_bits(regmap, NAU8325_R73_RDAC,
+			   NAU8325_DACVREFSEL_MASK,
+			   nau8325->dac_vref << NAU8325_DACVREFSEL_SFT);
+	/* DAC Reference Voltage Decoupling Capacitors. */
+	regmap_update_bits(regmap, NAU8325_R63_ANALOG_CONTROL_3,
+			   NAU8325_CLASSD_COARSE_GAIN_MASK, 0x4);
+	/* Auto-Att Min Gain 0dB, Class-D N Driver Slew Rate -25%. */
+	regmap_update_bits(regmap, NAU8325_R64_ANALOG_CONTROL_4,
+			   NAU8325_CLASSD_SLEWN_MASK, 0x7);
+
+	/* VMID Tieoff (VMID Resistor Selection) */
+	regmap_update_bits(regmap, NAU8325_R60_BIAS_ADJ,
+			   NAU8325_BIAS_VMID_SEL_MASK,
+			   nau8325->vref_impedance <<
+			   NAU8325_BIAS_VMID_SEL_SFT);
+
+	/* enable VMID, BIAS, DAC, DCA CLOCK, Voltage/Current Amps
+	 */
+	regmap_update_bits(regmap, NAU8325_R61_ANALOG_CONTROL_1,
+			   NAU8325_DACEN_MASK | NAU8325_DACCLKEN_MASK |
+			   NAU8325_DACEN_R_MASK | NAU8325_DACCLKEN_R_MASK |
+			   NAU8325_CLASSDEN_MASK | NAU8325_VMDFSTENB_MASK |
+			   NAU8325_BIASEN_MASK | NAU8325_VMIDEN_MASK,
+			   (0x1 << NAU8325_DACEN_SFT) |
+			   (0x1 << NAU8325_DACCLKEN_SFT) |
+			   (0x1 << NAU8325_DACEN_R_SFT) |
+			   (0x1 << NAU8325_DACCLKEN_R_SFT) |
+			   (0x1 << NAU8325_CLASSDEN_SFT) |
+			   (0x1 << NAU8325_VMDFSTENB_SFT) |
+			   (0x1 << NAU8325_BIASEN_SFT) | 0x3);
+
+	/* Enable ALC to avoid signal distortion when battery low. */
+	if (nau8325->alc_enable)
+		regmap_update_bits(regmap, NAU8325_R2E_ALC_CTRL3,
+				   NAU8325_ALC_EN, NAU8325_ALC_EN);
+	if (nau8325->clock_det_data)
+		regmap_update_bits(regmap, NAU8325_R40_CLK_DET_CTRL,
+				   NAU8325_APWRUP_EN, NAU8325_APWRUP_EN);
+	else
+		regmap_update_bits(regmap, NAU8325_R40_CLK_DET_CTRL,
+				   NAU8325_APWRUP_EN, 0);
+	if (nau8325->clock_detection)
+		regmap_update_bits(regmap, NAU8325_R40_CLK_DET_CTRL,
+				   NAU8325_CLKPWRUP_DIS |
+				   NAU8325_PWRUP_DFT, 0);
+	else
+		regmap_update_bits(regmap, NAU8325_R40_CLK_DET_CTRL,
+				   NAU8325_CLKPWRUP_DIS | NAU8325_PWRUP_DFT,
+				   NAU8325_CLKPWRUP_DIS);
+	regmap_update_bits(regmap, NAU8325_R29_DAC_CTRL1,
+			   NAU8325_DAC_OVERSAMPLE_MASK,
+			   NAU8325_DAC_OVERSAMPLE_128);
+}
+
+static void nau8325_print_device_properties(struct nau8325 *nau8325)
+{
+	struct device *dev = nau8325->dev;
+
+	dev_dbg(dev, "vref-impedance:          %d", nau8325->vref_impedance);
+	dev_dbg(dev, "dac-vref:                %d", nau8325->dac_vref);
+	dev_dbg(dev, "alc-enable:              %d", nau8325->alc_enable);
+	dev_dbg(dev, "clock-det-data:          %d", nau8325->clock_det_data);
+	dev_dbg(dev, "clock-detection-disable: %d", nau8325->clock_detection);
+}
+
+static int nau8325_read_device_properties(struct device *dev,
+					  struct nau8325 *nau8325)
+{
+	int ret;
+
+	nau8325->alc_enable =
+		device_property_read_bool(dev, "nuvoton,alc-enable");
+	nau8325->clock_det_data =
+		device_property_read_bool(dev, "nuvoton,clock-det-dataEnable VMID, BIAS");
+	nau8325->clock_detection =
+		!device_property_read_bool(dev,	"nuvoton,clock-detection-disable");
+
+	ret = device_property_read_u32(dev, "nuvoton,vref-impedance",
+				       &nau8325->vref_impedance);
+	if (ret)
+		nau8325->vref_impedance = 2;
+	ret = device_property_read_u32(dev, "nuvoton,dac-vref",
+				       &nau8325->dac_vref);
+	if (ret)
+		nau8325->dac_vref = 2;
+
+	return 0;
+}
+
+static int nau8325_i2c_probe(struct i2c_client *i2c,
+			     const struct i2c_device_id *id)
+{
+	struct device *dev = &i2c->dev;
+	struct nau8325 *nau8325 = dev_get_platdata(dev);
+	int ret, value;
+
+	if (!nau8325) {
+		nau8325 = devm_kzalloc(dev, sizeof(*nau8325), GFP_KERNEL);
+		if (!nau8325) {
+			ret = -ENOMEM;
+			goto err;
+		}
+		ret = nau8325_read_device_properties(dev, nau8325);
+		if (ret)
+			goto err;
+	}
+	i2c_set_clientdata(i2c, nau8325);
+
+	nau8325->regmap = devm_regmap_init_i2c(i2c, &nau8325_regmap_config);
+	if (IS_ERR(nau8325->regmap)) {
+		ret = PTR_ERR(nau8325->regmap);
+		goto err;
+	}
+	nau8325->dev = dev;
+	nau8325_print_device_properties(nau8325);
+
+	nau8325_reset_chip(nau8325->regmap);
+	ret = regmap_read(nau8325->regmap, NAU8325_R02_DEVICE_ID, &value);
+	if (ret) {
+		dev_dbg(dev, "Failed to read device id (%d)", ret);
+		goto err;
+	}
+	nau8325_init_regs(nau8325);
+
+	ret = devm_snd_soc_register_component(dev, &nau8325_component_driver,
+					      &nau8325_dai, 1);
+err:
+	return ret;
+}
+
+static const struct i2c_device_id nau8325_i2c_ids[] = {
+	{ "nau8325", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, nau8325_i2c_ids);
+
+#ifdef CONFIG_OF
+static const struct of_device_id nau8325_of_ids[] = {
+	{ .compatible = "nuvoton,nau8325", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, nau8325_of_ids);
+#endif
+
+static struct i2c_driver nau8325_i2c_driver = {
+	.driver = {
+		.name = "nau8325",
+		.of_match_table = of_match_ptr(nau8325_of_ids),
+	},
+	.probe = nau8325_i2c_probe,
+	.id_table = nau8325_i2c_ids,
+};
+module_i2c_driver(nau8325_i2c_driver);
+
+MODULE_DESCRIPTION("ASoC NAU8325 driver");
+MODULE_AUTHOR("Seven Lee <[email protected]>");
+MODULE_AUTHOR("David Lin <[email protected]>");
+MODULE_LICENSE("GPL");
sound/soc/codecs/nau8325.h new file +391 -0

391 lines not on this page · raw message

Signature · 1 line
2.25.1