Skip to contentSkip to conversation

dt-bindings: interrupt-controller: fsl,irqsteer: Allow Power Domains

PATCH In review Adam Ford 2 participants 2 messages Mar 5, 2024

Subsystems (2)
Device tree bindings irqchip drivers
lore
Share & tools
lore

Adam Ford

author
#0 lore raw

PATCH 1/1 dt-bindings: interrupt-controller: fsl,irqsteer: Allow Power Domains

The i.MX8MP HDMI irqsteer depends on the HDMI power domain, so add power-domains to the list of items which may be in the device tree.

Signed-off-by Adam Ford <[email protected]>
Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml +3 -0
index 20ad4ad82ad6..7ccbb96434a4 100644
@@ -59,6 +59,9 @@ properties:
       u32 value representing the number of input interrupts of this channel,
       should be multiple of 32 input interrupts and up to 512 interrupts.
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
Signature · 1 line
2.43.0
#1 lore raw
Quoted 2 lines · Adam Ford

The i.MX8MP HDMI irqsteer depends on the HDMI power domain, so add power-domains to the list of items which may be in the device tree.

What about the other irqsteers? If they don't all support power domains, then please restrict this property to the imx8mp.

Thanks,
Conor.

Quoted 20 lines
Signed-off-by Adam Ford <[email protected]>
Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml +3 -0
index 20ad4ad82ad6..7ccbb96434a4 100644
@@ -59,6 +59,9 @@ properties:
       u32 value representing the number of input interrupts of this channel,
       should be multiple of 32 input interrupts and up to 512 interrupts.
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
Signature · 1 line
2.43.0