dev-manual: Convert to 'bmaptool-native'
PATCH v2 1/1 dev-manual: Convert to 'bmaptool-native'
Since commit 7a036b1a1ec7 ("bmaptool: now part of Yocto Project") 'bmap-tools-native' has been renamed as 'bmaptool-native'.
Adjust the references in the documentation accordingly.
Suggested-by Khem Raj <[email protected]>
Signed-off-by Fabio Estevam <[email protected]>
---
Changes since v1:
- Add [email protected] on Cc
documentation/dev-manual/bmaptool.rst | 6 +++--- documentation/dev-manual/wic.rst | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-)
documentation/dev-manual/bmaptool.rst +3 -3
@@ -22,7 +22,7 @@ system image files much faster. - If you are unable to install the ``bmap-tools`` package, you will need to build Bmaptool before using it. Use the following command:: - $ bitbake bmap-tools-native + $ bitbake bmaptool-native Following, is an example that shows how to flash a Wic image. Realize that while this example uses a Wic image, you can use Bmaptool to flash
@@ -45,13 +45,13 @@ any type of image. Use these steps to flash an image using Bmaptool: - If you have write access to the media, use this command form:: - $ oe-run-native bmap-tools-native bmaptool copy build-directory/tmp/deploy/images/machine/image.wic /dev/sdX + $ oe-run-native bmaptool-native bmaptool copy build-directory/tmp/deploy/images/machine/image.wic /dev/sdX - If you do not have write access to the media, set your permissions first and then use the same command form:: $ sudo chmod 666 /dev/sdX - $ oe-run-native bmap-tools-native bmaptool copy build-directory/tmp/deploy/images/machine/image.wic /dev/sdX + $ oe-run-native bmaptool-native bmaptool copy build-directory/tmp/deploy/images/machine/image.wic /dev/sdX For help on the ``bmaptool`` command, use the following command::
documentation/dev-manual/wic.rst +1 -1
@@ -503,7 +503,7 @@ Continuing with the example, you can now write the image from the built your image, and boot from the media. You can write the image by using ``bmaptool`` or ``dd``:: - $ oe-run-native bmap-tools-native bmaptool copy mkefidisk-201804191017-sda.direct /dev/sdX + $ oe-run-native bmaptool-native bmaptool copy mkefidisk-201804191017-sda.direct /dev/sdX or ::
Signature · 1 line
2.34.1
Hi Fabio
Quoted 7 lines · Fabio Estevam
Since commit
7a036b1a1ec7("bmaptool: now part of Yocto Project") 'bmap-tools-native' has been renamed as 'bmaptool-native'.Adjust the references in the documentation accordingly.
Suggested-by Khem Raj <[email protected]>Signed-off-by Fabio Estevam <[email protected]>
Many thanks for the patch!
However, I eventually took Trevor's version, which was more exhaustive than yours...
Funny to have two competing patches :-)
Thanks anyway
Cheers
Michael.
Signature · 3 lines
Michael Opdenacker, Bootlin Embedded Linux and Kernel engineering https://bootlin.com