pinctrl: aw9523: number of cleanups
Subsystems (2)
cover pinctrl: aw9523: number of cleanups
Just noticed that the newly introduced driver has some leftovers or unneeded customisation. Hence this series. It may (or may not :-) be sent as an update after v6.9-rc1 for v6.9 cycle, but TBH there is nothing functional critical.
Andy Shevchenko (11):
pinctrl: aw9523: Destroy mutex on ->remove()
pinctrl: aw9523: Use correct error code for not supported
functionality
pinctrl: aw9523: Always try both ports in aw9523_gpio_set_multiple()
pinctrl: aw9523: Make use of struct pinfunction and
PINCTRL_PINFUNCTION()
pinctrl: aw9523: Use temporary variable for HW IRQ number
pinctrl: aw9523: Get rid of redundant ' & U8_MAX' pieces
pinctrl: aw9523: Remove unused irqchip field in struct aw9523_irq
pinctrl: aw9523: Make use of dev_err_probe()
pinctrl: aw9523: Sort headers and group pinctrl/*
pinctrl: aw9523: Fix indentation in a few places
pinctrl: aw9523: Remove redundant dependency to OF
drivers/pinctrl/Kconfig | 2 +- drivers/pinctrl/pinctrl-aw9523.c | 132 +++++++++++-------------------- 2 files changed, 48 insertions(+), 86 deletions(-)
Signature · 1 line
2.44.0
PATCH 1/11 pinctrl: aw9523: Destroy mutex on ->remove()
If aw9523_hw_init() fails on ->remove() the mutex left alive. Destroy it in that case as well. While at it, remove never true check at the beginning of the function.
--- drivers/pinctrl/pinctrl-aw9523.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-)
drivers/pinctrl/pinctrl-aw9523.c +1 -7
@@ -1067,10 +1067,6 @@ static int aw9523_probe(struct i2c_client *client)static void aw9523_remove (struct i2c_client *client) {struct aw9523 *awi =i2c_get_clientdata (client); -int ret; - -if (!awi) -return ;/* * If the chip VIO is connected to a regulator that we can turn
@@ -1082,10 +1078,8 @@ static void aw9523_remove(struct i2c_client *client)regulator_disable (awi->vio_vreg); }else {mutex_lock (&awi->i2c_lock); - ret =aw9523_hw_init (awi); +aw9523_hw_init (awi);mutex_unlock (&awi->i2c_lock); -if (ret) -return ; }mutex_destroy (&awi->i2c_lock);
Signature · 1 line
2.44.0
PATCH 2/11 pinctrl: aw9523: Use correct error code for not supported functionality
In reply to Andy ShevchenkoThe pin control subsystem internally uses ENOTSUPP for the not supported functionality. The checkpatch is false positive about this error code.
--- drivers/pinctrl/pinctrl-aw9523.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
drivers/pinctrl/pinctrl-aw9523.c +5 -4
@@ -6,6 +6,7 @@*/ #include <linux/bitfield.h> +#include <linux/errno.h> #include <linux/gpio/consumer.h> #include <linux/gpio/driver.h> #include <linux/i2c.h>
@@ -239,7 +240,7 @@ static int aw9523_pcfg_param_to_reg(enum pin_config_param pcp, int pin, u8 *r) reg =AW9523_REG_OUT_STATE (pin);break ;default : -return -EOPNOTSUPP ; +return -ENOTSUPP ; } *r = reg;
@@ -290,7 +291,7 @@ static int aw9523_pconf_get(struct pinctrl_dev *pctldev, unsigned int pin, val =FIELD_GET (AW9523_GCR_GPOMD_MASK , val);break ;default : -return -EOPNOTSUPP ; +return -ENOTSUPP ; }if (val <1 )return -EINVAL ;
@@ -344,7 +345,7 @@ static int aw9523_pconf_set(struct pinctrl_dev *pctldev, unsigned int pin,case PIN_CONFIG_DRIVE_OPEN_DRAIN :/* Open-Drain is supported only on port 0 */ if (pin >=AW9523_PINS_PER_PORT ) { - rc = -EOPNOTSUPP ; + rc = -ENOTSUPP ; goto end; } mask =AW9523_GCR_GPOMD_MASK ;
@@ -361,7 +362,7 @@ static int aw9523_pconf_set(struct pinctrl_dev *pctldev, unsigned int pin, val =AW9523_GCR_GPOMD_MASK ;break ;default : - rc = -EOPNOTSUPP ; + rc = -ENOTSUPP ; goto end; }
Signature · 1 line
2.44.0
PATCH 3/11 pinctrl: aw9523: Always try both ports in aw9523_gpio_set_multiple()
In reply to Andy ShevchenkoThe ports are equivalent from the user's point of view. Don't limit trying them both if writing to one fails.
--- drivers/pinctrl/pinctrl-aw9523.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)
drivers/pinctrl/pinctrl-aw9523.c +2 -5
@@ -653,7 +653,7 @@ static void aw9523_gpio_set_multiple(struct gpio_chip *chip,struct aw9523 *awi =gpiochip_get_data (chip);u8 mask_lo, mask_hi, bits_lo, bits_hi;unsigned int reg; -int ret =0 ; +int ret; mask_lo = *mask &U8_MAX ; mask_hi = (*mask >>8 ) &U8_MAX ;
@@ -663,10 +663,8 @@ static void aw9523_gpio_set_multiple(struct gpio_chip *chip, bits_hi = (*bits >>8 ) &U8_MAX ; ret =regmap_write_bits (awi->regmap, reg, mask_hi, bits_hi); -if (ret) { +if (ret)dev_warn (awi->dev,"Cannot write port1 out level\n" ); - goto out; - } }if (mask_lo) { reg =AW9523_REG_OUT_STATE (0 );
@@ -675,7 +673,6 @@ static void aw9523_gpio_set_multiple(struct gpio_chip *chip,if (ret)dev_warn (awi->dev,"Cannot write port0 out level\n" ); } -out:mutex_unlock (&awi->i2c_lock); }
Signature · 1 line
2.44.0
PATCH 4/11 pinctrl: aw9523: Make use of struct pinfunction and PINCTRL_PINFUNCTION()
In reply to Andy ShevchenkoFrom: Andy Shevchenko <[email protected]>
Since pin control provides a generic data type and a macro for the pin function definition, use them in the driver.
--- drivers/pinctrl/pinctrl-aw9523.c | 32 ++++++-------------------------- 1 file changed, 6 insertions(+), 26 deletions(-)
drivers/pinctrl/pinctrl-aw9523.c +6 -26
@@ -66,18 +66,6 @@ struct aw9523_irq {u16 cached_gpio; }; -/* -* struct aw9523_pinmux - Pin mux params -* @name: Name of the mux -* @grps: Groups of the mux -* @num_grps: Number of groups (sizeof array grps) -*/ -struct aw9523_pinmux { -const char *name; -const char *const *grps; -const u8 num_grps; -}; -/* * struct aw9523 - Main driver structure * @dev: device handle
@@ -158,17 +146,9 @@ static const char * const gpio_pwm_groups[] = { };/* Warning: Do NOT reorder this array */ -static const struct aw9523_pinmux aw9523_pmx[] = { - { - .name ="pwm" , - .grps = gpio_pwm_groups, - .num_grps =ARRAY_SIZE (gpio_pwm_groups), - }, - { - .name ="gpio" , - .grps = gpio_pwm_groups, - .num_grps =ARRAY_SIZE (gpio_pwm_groups), - }, +static const struct pinfunction aw9523_pmx[] = { +PINCTRL_PINFUNCTION ("pwm" , gpio_pwm_groups,ARRAY_SIZE (gpio_pwm_groups)), +PINCTRL_PINFUNCTION ("gpio" , gpio_pwm_groups,ARRAY_SIZE (gpio_pwm_groups)), };static int aw9523_pmx_get_funcs_count (struct pinctrl_dev *pctl)
@@ -184,10 +164,10 @@ static const char *aw9523_pmx_get_fname(struct pinctrl_dev *pctl,static int aw9523_pmx_get_groups (struct pinctrl_dev *pctl,unsigned int sel,const char *const **groups, -unsigned int *const num_groups) +unsigned int *const ngroups) { - *groups = aw9523_pmx[sel].grps; - *num_groups = aw9523_pmx[sel].num_grps; + *groups = aw9523_pmx[sel].groups; + *ngroups = aw9523_pmx[sel].ngrpoups;return 0 ; }
Signature · 1 line
2.44.0
kernel test robot
build botRe: [PATCH v1 04/11] pinctrl: aw9523: Make use of struct pinfunction and PINCTRL_PINFUNCTION()
kernel test robot noticed the following build errors:
Hi Andy,
kernel test robot noticed the following build errors:
[auto build test ERROR on linusw-pinctrl/devel]
[also build test ERROR on linusw-pinctrl/for-next linus/master next-20240314] [cannot apply to v6.8]
[If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Andy-Shevchenko/pinctrl-aw9523-Destroy-mutex-on-remove/20240314-075853 base: https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git devel patch link: https://lore.kernel.org/r/20240313235422.180075-5-andy.shevchenko%40gmail.com patch subject: [PATCH v1 04/11] pinctrl: aw9523: Make use of struct pinfunction and PINCTRL_PINFUNCTION() config: alpha-allyesconfig (https://download.01.org/0day-ci/archive/20240315/[email protected]/config) compiler: alpha-linux-gcc (GCC) 13.2.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240315/[email protected]/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
All errors (new ones prefixed by >>):
drivers/pinctrl/pinctrl-aw9523.c: In function 'aw9523_pmx_get_groups':
>> drivers/pinctrl/pinctrl-aw9523.c:170:36: error: 'const struct pinfunction' has no member named 'ngrpoups'; did you mean 'ngroups'?
170 | *ngroups = aw9523_pmx[sel].ngrpoups;
| ^~~~~~~~
| ngroupsvim +170 drivers/pinctrl/pinctrl-aw9523.c
164
165 static int aw9523_pmx_get_groups(struct pinctrl_dev *pctl, unsigned int sel,
166 const char * const **groups,
167 unsigned int * const ngroups)
168 {
169 *groups = aw9523_pmx[sel].groups;
> 170 *ngroups = aw9523_pmx[sel].ngrpoups;
171 return 0;
172 }
173
Signature · 2 lines
0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki
kernel test robot
build botRe: [PATCH v1 04/11] pinctrl: aw9523: Make use of struct pinfunction and PINCTRL_PINFUNCTION()
In reply to Andy Shevchenkokernel test robot noticed the following build errors:
Hi Andy,
kernel test robot noticed the following build errors:
[auto build test ERROR on linusw-pinctrl/devel]
[also build test ERROR on linusw-pinctrl/for-next linus/master next-20240314] [cannot apply to v6.8]
[If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Andy-Shevchenko/pinctrl-aw9523-Destroy-mutex-on-remove/20240314-075853 base: https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git devel patch link: https://lore.kernel.org/r/20240313235422.180075-5-andy.shevchenko%40gmail.com patch subject: [PATCH v1 04/11] pinctrl: aw9523: Make use of struct pinfunction and PINCTRL_PINFUNCTION() config: hexagon-allmodconfig (https://download.01.org/0day-ci/archive/20240315/[email protected]/config) compiler: clang version 19.0.0git (https://github.com/llvm/llvm-project 503c55e17037436dcd45ac69dea8967e67e3f5e8) reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240315/[email protected]/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
All errors (new ones prefixed by >>):
In file included from drivers/pinctrl/pinctrl-aw9523.c:11:
In file included from include/linux/gpio/driver.h:8:
In file included from include/linux/irqchip/chained_irq.h:10:
In file included from include/linux/irq.h:20:
In file included from include/linux/io.h:13:
In file included from arch/hexagon/include/asm/io.h:328:
include/asm-generic/io.h:547:31: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
547 | val = __raw_readb(PCI_IOBASE + addr);
| ~~~~~~~~~~ ^
include/asm-generic/io.h:560:61: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
560 | val = __le16_to_cpu((__le16 __force)__raw_readw(PCI_IOBASE + addr));
| ~~~~~~~~~~ ^
include/uapi/linux/byteorder/little_endian.h:37:51: note: expanded from macro '__le16_to_cpu'
37 | #define __le16_to_cpu(x) ((__force __u16)(__le16)(x))
| ^
In file included from drivers/pinctrl/pinctrl-aw9523.c:11:
In file included from include/linux/gpio/driver.h:8:
In file included from include/linux/irqchip/chained_irq.h:10:
In file included from include/linux/irq.h:20:
In file included from include/linux/io.h:13:
In file included from arch/hexagon/include/asm/io.h:328:
include/asm-generic/io.h:573:61: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
573 | val = __le32_to_cpu((__le32 __force)__raw_readl(PCI_IOBASE + addr));
| ~~~~~~~~~~ ^
include/uapi/linux/byteorder/little_endian.h:35:51: note: expanded from macro '__le32_to_cpu'
35 | #define __le32_to_cpu(x) ((__force __u32)(__le32)(x))
| ^
In file included from drivers/pinctrl/pinctrl-aw9523.c:11:
In file included from include/linux/gpio/driver.h:8:
In file included from include/linux/irqchip/chained_irq.h:10:
In file included from include/linux/irq.h:20:
In file included from include/linux/io.h:13:
In file included from arch/hexagon/include/asm/io.h:328:
include/asm-generic/io.h:584:33: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
584 | __raw_writeb(value, PCI_IOBASE + addr);
| ~~~~~~~~~~ ^
include/asm-generic/io.h:594:59: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
594 | __raw_writew((u16 __force)cpu_to_le16(value), PCI_IOBASE + addr);
| ~~~~~~~~~~ ^
include/asm-generic/io.h:604:59: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
604 | __raw_writel((u32 __force)cpu_to_le32(value), PCI_IOBASE + addr);
| ~~~~~~~~~~ ^
In file included from drivers/pinctrl/pinctrl-aw9523.c:12:
In file included from include/linux/i2c.h:19:
In file included from include/linux/regulator/consumer.h:35:
In file included from include/linux/suspend.h:5:
In file included from include/linux/swap.h:9:
In file included from include/linux/memcontrol.h:20:
In file included from include/linux/mm.h:2188:
include/linux/vmstat.h:522:36: warning: arithmetic between different enumeration types ('enum node_stat_item' and 'enum lru_list') [-Wenum-enum-conversion]
522 | return node_stat_name(NR_LRU_BASE + lru) + 3; // skip "nr_"
| ~~~~~~~~~~~ ^ ~~~
>> drivers/pinctrl/pinctrl-aw9523.c:170:29: error: no member named 'ngrpoups' in 'struct pinfunction'; did you mean 'ngroups'?
170 | *ngroups = aw9523_pmx[sel].ngrpoups;
| ^~~~~~~~
| ngroups
include/linux/pinctrl/pinctrl.h:218:9: note: 'ngroups' declared here
218 | size_t ngroups;
| ^7 warnings and 1 error generated.
vim +170 drivers/pinctrl/pinctrl-aw9523.c
164
165 static int aw9523_pmx_get_groups(struct pinctrl_dev *pctl, unsigned int sel,
166 const char * const **groups,
167 unsigned int * const ngroups)
168 {
169 *groups = aw9523_pmx[sel].groups;
> 170 *ngroups = aw9523_pmx[sel].ngrpoups;
171 return 0;
172 }
173
Signature · 2 lines
0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki
PATCH 5/11 pinctrl: aw9523: Use temporary variable for HW IRQ number
In reply to Andy ShevchenkoThere are two different ways on how to get HW IRQ number in some functions. Unify that by using temporary variable and irqd_to_hwirq() call.
--- drivers/pinctrl/pinctrl-aw9523.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
drivers/pinctrl/pinctrl-aw9523.c +8 -8
@@ -428,12 +428,12 @@ static int aw9523_gpio_irq_type(struct irq_data *d, unsigned int type)static void aw9523_irq_mask (struct irq_data *d) {struct aw9523 *awi =gpiochip_get_data (irq_data_get_irq_chip_data (d)); -unsigned int n = d->hwirq %AW9523_PINS_PER_PORT ; +irq_hw_number_t hwirq =irqd_to_hwirq (d); +unsigned int n = hwirq %AW9523_PINS_PER_PORT ; -regmap_update_bits (awi->regmap, -AW9523_REG_INTR_DIS (d->hwirq), +regmap_update_bits (awi->regmap,AW9523_REG_INTR_DIS (hwirq),BIT (n),BIT (n)); -gpiochip_disable_irq (&awi->gpio,irqd_to_hwirq (d)); +gpiochip_disable_irq (&awi->gpio, hwirq); }/*
@@ -446,11 +446,11 @@ static void aw9523_irq_mask(struct irq_data *d)static void aw9523_irq_unmask (struct irq_data *d) {struct aw9523 *awi =gpiochip_get_data (irq_data_get_irq_chip_data (d)); -unsigned int n = d->hwirq %AW9523_PINS_PER_PORT ; +irq_hw_number_t hwirq =irqd_to_hwirq (d); +unsigned int n = hwirq %AW9523_PINS_PER_PORT ; -gpiochip_enable_irq (&awi->gpio,irqd_to_hwirq (d)); -regmap_update_bits (awi->regmap, -AW9523_REG_INTR_DIS (d->hwirq), +gpiochip_enable_irq (&awi->gpio, hwirq); +regmap_update_bits (awi->regmap,AW9523_REG_INTR_DIS (hwirq),BIT (n),0 ); }
Signature · 1 line
2.44.0
PATCH 6/11 pinctrl: aw9523: Get rid of redundant ' & U8_MAX' pieces
In reply to Andy ShevchenkoWhen the variable is declared as u8, no need to perform ' & U8_MAX' as it's implied anyway.
--- drivers/pinctrl/pinctrl-aw9523.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/pinctrl/pinctrl-aw9523.c +7 -7
@@ -603,7 +603,7 @@ static int aw9523_gpio_get_multiple(struct gpio_chip *chip,mutex_lock (&awi->i2c_lock);/* Port 0 (gpio 0-7) */ - m = *mask &U8_MAX ; + m = *mask;if (m) { ret =_aw9523_gpio_get_multiple (awi,0 , &state, m);if (ret)
@@ -612,7 +612,7 @@ static int aw9523_gpio_get_multiple(struct gpio_chip *chip, *bits = state;/* Port 1 (gpio 8-15) */ - m = (*mask >>8 ) &U8_MAX ; + m = *mask >>8 ;if (m) { ret =_aw9523_gpio_get_multiple (awi,AW9523_PINS_PER_PORT , &state, m);
@@ -635,20 +635,20 @@ static void aw9523_gpio_set_multiple(struct gpio_chip *chip,unsigned int reg;int ret; - mask_lo = *mask &U8_MAX ; - mask_hi = (*mask >>8 ) &U8_MAX ; + mask_lo = *mask; + mask_hi = *mask >>8 ; + bits_lo = *bits; + bits_hi = *bits >>8 ; +mutex_lock (&awi->i2c_lock);if (mask_hi) { reg =AW9523_REG_OUT_STATE (AW9523_PINS_PER_PORT ); - bits_hi = (*bits >>8 ) &U8_MAX ; - ret =regmap_write_bits (awi->regmap, reg, mask_hi, bits_hi);if (ret)dev_warn (awi->dev,"Cannot write port1 out level\n" ); }if (mask_lo) { reg =AW9523_REG_OUT_STATE (0 ); - bits_lo = *bits &U8_MAX ; ret =regmap_write_bits (awi->regmap, reg, mask_lo, bits_lo);if (ret)dev_warn (awi->dev,"Cannot write port0 out level\n" );
Signature · 1 line
2.44.0
PATCH 7/11 pinctrl: aw9523: Remove unused irqchip field in struct aw9523_irq
In reply to Andy ShevchenkoThe irqchip field is allocated, assigned but never used. Remove it.
--- drivers/pinctrl/pinctrl-aw9523.c | 8 -------- 1 file changed, 8 deletions(-)
drivers/pinctrl/pinctrl-aw9523.c +0 -8
@@ -57,12 +57,10 @@/* * struct aw9523_irq - Interrupt controller structure * @lock: mutex locking for the irq bus -* @irqchip: structure holding irqchip params * @cached_gpio: stores the previous gpio status for bit comparison */ struct aw9523_irq {struct mutex lock; -struct irq_chip *irqchip;u16 cached_gpio; };
@@ -805,21 +803,15 @@ static int aw9523_init_irq(struct aw9523 *awi, int irq) {struct device *dev = awi->dev;struct gpio_irq_chip *girq; -struct irq_chip *irqchip;int ret;if (!device_property_read_bool (dev,"interrupt-controller" ))return 0 ; - irqchip =devm_kzalloc (dev,sizeof (*irqchip),GFP_KERNEL ); -if (!irqchip) -return -ENOMEM ; - awi->irq =devm_kzalloc (dev,sizeof (*awi->irq),GFP_KERNEL );if (!awi->irq)return -ENOMEM ; - awi->irq->irqchip = irqchip;mutex_init (&awi->irq->lock); ret = devm_request_threaded_irq(dev, irq, NULL, aw9523_irq_thread_func,
Signature · 1 line
2.44.0
PATCH 8/11 pinctrl: aw9523: Make use of dev_err_probe()
In reply to Andy ShevchenkoFrom: Andy Shevchenko <[email protected]>
Simplify the error handling in probe function by switching from dev_err() to dev_err_probe().
--- drivers/pinctrl/pinctrl-aw9523.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-)
drivers/pinctrl/pinctrl-aw9523.c +3 -6
@@ -816,10 +816,8 @@ static int aw9523_init_irq(struct aw9523 *awi, int irq) ret =devm_request_threaded_irq (dev, irq,NULL , aw9523_irq_thread_func,IRQF_ONESHOT ,dev_name (dev), awi); -if (ret) { -dev_err (dev,"Failed to request irq %d\n" , irq); -return ret; - } +if (ret) +return dev_err_probe (dev, ret,"Failed to request irq %d\n" , irq); girq = &awi->gpio.irq;gpio_irq_chip_set_chip (girq, &aw9523_irq_chip);
@@ -1016,8 +1014,7 @@ static int aw9523_probe(struct i2c_client *client) awi->pctl =devm_pinctrl_register (dev, pdesc, awi);if (IS_ERR (awi->pctl)) { - ret =PTR_ERR (awi->pctl); -dev_err (dev,"Cannot register pinctrl: %d" , ret); + ret =dev_err_probe (dev,PTR_ERR (awi->pctl),"Cannot register pinctrl" ); goto err_disable_vregs; }
Signature · 1 line
2.44.0
PATCH 9/11 pinctrl: aw9523: Sort headers and group pinctrl/*
In reply to Andy ShevchenkoOne header was misplaced and group pinctrl/* ones to show the relation with the pin control subsystem.
--- drivers/pinctrl/pinctrl-aw9523.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
drivers/pinctrl/pinctrl-aw9523.c +6 -5
@@ -13,17 +13,18 @@#include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> -#include <linux/mutex.h> #include <linux/module.h> -#include <linux/pinctrl/pinconf.h> -#include <linux/pinctrl/pinctrl.h> -#include <linux/pinctrl/pinmux.h> -#include <linux/pinctrl/pinconf-generic.h> +#include <linux/mutex.h> #include <linux/property.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> #include <linux/slab.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinmux.h> +#define AW9523_MAX_FUNCS 2#define AW9523_NUM_PORTS 2#define AW9523_PINS_PER_PORT 8
Signature · 1 line
2.44.0
PATCH 10/11 pinctrl: aw9523: Fix indentation in a few places
In reply to Andy ShevchenkoIn the comment, function prototype, and array of strings indentation is kinda broken. Reindent that.
--- drivers/pinctrl/pinctrl-aw9523.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-)
drivers/pinctrl/pinctrl-aw9523.c +8 -9
@@ -1,8 +1,7 @@// SPDX-License-Identifier: GPL-2.0-only /* * Awinic AW9523B i2c pin controller driver -* Copyright (c) 2020, AngeloGioacchino Del Regno -* <[email protected]> +* Copyright (c) 2020, AngeloGioacchino Del Regno <[email protected]> */ #include <linux/bitfield.h>
@@ -139,9 +138,10 @@ static const struct pinctrl_ops aw9523_pinctrl_ops = { };static const char *const gpio_pwm_groups[] = { -"gpio0" ,"gpio1" ,"gpio2" ,"gpio3" ,"gpio4" ,"gpio5" , -"gpio6" ,"gpio7" ,"gpio8" ,"gpio9" ,"gpio10" ,"gpio11" , -"gpio12" ,"gpio13" ,"gpio14" ,"gpio15" +"gpio0" ,"gpio1" ,"gpio2" ,"gpio3" ,/* 0-3 */ +"gpio4" ,"gpio5" ,"gpio6" ,"gpio7" ,/* 4-7 */ +"gpio8" ,"gpio9" ,"gpio10" ,"gpio11" ,/* 8-11 */ +"gpio12" ,"gpio13" ,"gpio14" ,"gpio15" ,/* 11-15 */ };/* Warning: Do NOT reorder this array */
@@ -388,8 +388,8 @@ static int aw9523_get_pin_direction(struct regmap *regmap, u8 pin, u8 n)* * Return: Zero for success or negative number for error */ -static int aw9523_get_port_state (struct regmap *regmap,u8 pin, -u8 regbit,unsigned int *state) +static int aw9523_get_port_state (struct regmap *regmap,u8 pin,u8 regbit, +unsigned int *state) {u8 reg;int dir;
@@ -984,8 +984,7 @@ static int aw9523_probe(struct i2c_client *client) }mutex_init (&awi->i2c_lock); -lockdep_set_subclass (&awi->i2c_lock, -i2c_adapter_depth (client->adapter)); +lockdep_set_subclass (&awi->i2c_lock,i2c_adapter_depth (client->adapter)); pdesc =devm_kzalloc (dev,sizeof (*pdesc),GFP_KERNEL );if (!pdesc)
Signature · 1 line
2.44.0
PATCH 11/11 pinctrl: aw9523: Remove redundant dependency to OF
In reply to Andy ShevchenkoDriver does not dependent on OF, remove it.
While here, add missing mod_devicetable.h.
--- drivers/pinctrl/Kconfig | 2 +- drivers/pinctrl/pinctrl-aw9523.c | 1 + 2 files changed, 2 insertions(+), 1 deletion(-)
drivers/pinctrl/Kconfig +1 -1
@@ -129,7 +129,7 @@ config PINCTRL_AXP209 config PINCTRL_AW9523 tristate "Awinic AW9523/AW9523B I2C GPIO expander pinctrl driver" - depends on OF && I2C + depends on I2C select PINMUX select PINCONF select GENERIC_PINCONF
drivers/pinctrl/pinctrl-aw9523.c +1 -0
@@ -12,6 +12,7 @@#include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/mod_devicetable.h> #include <linux/module.h> #include <linux/mutex.h> #include <linux/property.h>
Signature · 1 line
2.44.0
Quoted 4 lines · Andy Shevchenko
Just noticed that the newly introduced driver has some leftovers or unneeded customisation. Hence this series. It may (or may not :-) be sent as an update after v6.9-rc1 for v6.9 cycle, but TBH there is nothing functional critical.
regards,
dan carpenter
Quoted 3 lines · Andy Shevchenko
Just noticed that the newly introduced driver has some leftovers or unneeded customisation. Hence this series. It may (or may not :-) be sent as an update after v6.9-rc1 for v6.9 cycle, but TBH there is nothing functional critical.
There is some speling mistake making patch 4 fail according to kernelbot, if you rebase on v6.9-rc1 and fix patch 4 I think I can just apply the lot.
Thanks!
Linus Walleij
Quoted 10 lines · Linus Walleij
Quoted 3 lines · Andy Shevchenko
Just noticed that the newly introduced driver has some leftovers or unneeded customisation. Hence this series. It may (or may not :-) be sent as an update after v6.9-rc1 for v6.9 cycle, but TBH there is nothing functional critical.
There is some speling mistake making patch 4 fail according to kernelbot, if you rebase on v6.9-rc1 and fix patch 4 I think I can just apply the lot.
Yeah, I will do it soon.
Signature · 2 lines
With Best Regards, Andy Shevchenko