Skip to contentSkip to conversation

bpf,arm64: Add support for BPF Arena

PATCH Superseded Puranjay Mohan 3 participants 7 messages Mar 14, 2024 – Mar 15, 2024

Subsystems (5)
Kselftest BPF arm64 BPF selftests +1 more subsystems

v1 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

cover bpf,arm64: Add support for BPF Arena

This series adds the support for PROBE_MEM32 and bpf_addr_space_cast instructions to the ARM64 BPF JIT. These two instructions allow the enablement of BPF Arena.

All arena related selftests are passing.

[root@ip-172-31-6-62 bpf]# ./test_progs -a "*arena*"

  #3/1     arena_htab/arena_htab_llvm:OK
  #3/2     arena_htab/arena_htab_asm:OK
  #3       arena_htab:OK
  #4/1     arena_list/arena_list_1:OK
  #4/2     arena_list/arena_list_1000:OK
  #4       arena_list:OK
  #434/1   verifier_arena/basic_alloc1:OK
  #434/2   verifier_arena/basic_alloc2:OK
  #434/3   verifier_arena/basic_alloc3:OK
  #434/4   verifier_arena/iter_maps1:OK
  #434/5   verifier_arena/iter_maps2:OK
  #434/6   verifier_arena/iter_maps3:OK
  #434     verifier_arena:OK

Summary: 3/10 PASSED, 0 SKIPPED, 0 FAILED

The implementation of bpf_addr_space_cast can be optimised by using ROR (immediate) and CSEL instructions. Currently, lib/insn.c doesn't have APIs to generate these intructions. I will send subsequent patches to implement the APIs and then use these instructions in the JIT.

Puranjay Mohan (2):
bpf: Add arm64 JIT support for PROBE_MEM32 pseudo instructions.
bpf: Add arm64 JIT support for bpf_addr_space_cast instruction.

 arch/arm64/net/bpf_jit.h                     |   1 +
 arch/arm64/net/bpf_jit_comp.c                | 105 +++++++++++++++++--
 tools/testing/selftests/bpf/DENYLIST.aarch64 |   2 -
 3 files changed, 96 insertions(+), 12 deletions(-)
Signature · 1 line
2.40.1
#1 lore raw

PATCH 1/2 bpf: Add arm64 JIT support for PROBE_MEM32 pseudo instructions.

Add support for [LDX | STX | ST], PROBE_MEM32, [B | H | W | DW] instructions. They are similar to PROBE_MEM instructions with the following differences:
- PROBE_MEM32 supports store.
- PROBE_MEM32 relies on the verifier to clear upper 32-bit of the src/dst register
- PROBE_MEM32 adds 64-bit kern_vm_start address (which is stored in R28 in the prologue). Due to bpf_arena constructions such R28 + reg + off16 access is guaranteed to be within arena virtual range, so no address check at run-time.
- PROBE_MEM32 allows STX and ST. If they fault the store is a nop. When LDX faults the destination register is zeroed.

To support these on arm64, we do tmp2 = R28 + src/dst reg and then use tmp2 as the new src/dst register. This allows us to reuse most of the code for normal [LDX | STX | ST].

---
 arch/arm64/net/bpf_jit_comp.c | 70 ++++++++++++++++++++++++++++++-----
 1 file changed, 60 insertions(+), 10 deletions(-)
arch/arm64/net/bpf_jit_comp.c +60 -10
index c5b461dda438..ce66c17b73a0 100644
@@ -29,6 +29,7 @@
 #define TCALL_CNT (MAX_BPF_JIT_REG + 2)
 #define TMP_REG_3 (MAX_BPF_JIT_REG + 3)
 #define FP_BOTTOM (MAX_BPF_JIT_REG + 4)
+#define PROBE_MEM32_BASE (MAX_BPF_JIT_REG + 5)
 
 #define check_imm(bits, imm) do {				\
 	if ((((imm) > 0) && ((imm) >> (bits))) ||		\
@@ -67,6 +68,8 @@ static const int bpf2a64[] = {
 	/* temporary register for blinding constants */
 	[BPF_REG_AX] = A64_R(9),
 	[FP_BOTTOM] = A64_R(27),
+	/* callee saved register for kern_vm_start address */
+	[PROBE_MEM32_BASE] = A64_R(28),
 };
 
 struct jit_ctx {
@@ -295,7 +298,7 @@ static bool is_lsi_offset(int offset, int scale)
 #define PROLOGUE_OFFSET (BTI_INSNS + 2 + PAC_INSNS + 8)
 
 static int build_prologue(struct jit_ctx *ctx, bool ebpf_from_cbpf,
-			  bool is_exception_cb)
+			  bool is_exception_cb, u64 arena_vm_start)
 {
 	const struct bpf_prog *prog = ctx->prog;
 	const bool is_main_prog = !bpf_is_subprog(prog);
@@ -306,6 +309,7 @@ static int build_prologue(struct jit_ctx *ctx, bool ebpf_from_cbpf,
 	const u8 fp = bpf2a64[BPF_REG_FP];
 	const u8 tcc = bpf2a64[TCALL_CNT];
 	const u8 fpb = bpf2a64[FP_BOTTOM];
+	const u8 pb = bpf2a64[PROBE_MEM32_BASE];
 	const int idx0 = ctx->idx;
 	int cur_offset;
 
@@ -411,6 +415,10 @@ static int build_prologue(struct jit_ctx *ctx, bool ebpf_from_cbpf,
 
 	/* Set up function call stack */
 	emit(A64_SUB_I(1, A64_SP, A64_SP, ctx->stack_size), ctx);
+
+	if (arena_vm_start)
+		emit_a64_mov_i64(pb, arena_vm_start, ctx);
+
 	return 0;
 }
 
@@ -738,6 +746,7 @@ static void build_epilogue(struct jit_ctx *ctx, bool is_exception_cb)
 
 #define BPF_FIXUP_OFFSET_MASK	GENMASK(26, 0)
 #define BPF_FIXUP_REG_MASK	GENMASK(31, 27)
+#define DONT_CLEAR 32
 
 bool ex_handler_bpf(const struct exception_table_entry *ex,
 		    struct pt_regs *regs)
@@ -745,7 +754,8 @@ bool ex_handler_bpf(const struct exception_table_entry *ex,
 	off_t offset = FIELD_GET(BPF_FIXUP_OFFSET_MASK, ex->fixup);
 	int dst_reg = FIELD_GET(BPF_FIXUP_REG_MASK, ex->fixup);
 
-	regs->regs[dst_reg] = 0;
+	if (dst_reg != DONT_CLEAR)
+		regs->regs[dst_reg] = 0;
 	regs->pc = (unsigned long)&ex->fixup - offset;
 	return true;
 }
@@ -765,7 +775,8 @@ static int add_exception_handler(const struct bpf_insn *insn,
 		return 0;
 
 	if (BPF_MODE(insn->code) != BPF_PROBE_MEM &&
-		BPF_MODE(insn->code) != BPF_PROBE_MEMSX)
+		BPF_MODE(insn->code) != BPF_PROBE_MEMSX &&
+			BPF_MODE(insn->code) != BPF_PROBE_MEM32)
 		return 0;
 
 	if (!ctx->prog->aux->extable ||
@@ -810,6 +821,9 @@ static int add_exception_handler(const struct bpf_insn *insn,
 
 	ex->insn = ins_offset;
 
+	if (BPF_CLASS(insn->code) != BPF_LDX)
+		dst_reg = DONT_CLEAR;
+
 	ex->fixup = FIELD_PREP(BPF_FIXUP_OFFSET_MASK, fixup_offset) |
 		    FIELD_PREP(BPF_FIXUP_REG_MASK, dst_reg);
 
@@ -829,12 +843,13 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
 		      bool extra_pass)
 {
 	const u8 code = insn->code;
-	const u8 dst = bpf2a64[insn->dst_reg];
-	const u8 src = bpf2a64[insn->src_reg];
+	u8 dst = bpf2a64[insn->dst_reg];
+	u8 src = bpf2a64[insn->src_reg];
 	const u8 tmp = bpf2a64[TMP_REG_1];
 	const u8 tmp2 = bpf2a64[TMP_REG_2];
 	const u8 fp = bpf2a64[BPF_REG_FP];
 	const u8 fpb = bpf2a64[FP_BOTTOM];
+	const u8 pb = bpf2a64[PROBE_MEM32_BASE];
 	const s16 off = insn->off;
 	const s32 imm = insn->imm;
 	const int i = insn - ctx->prog->insnsi;
@@ -1237,7 +1252,15 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
 	case BPF_LDX | BPF_PROBE_MEMSX | BPF_B:
 	case BPF_LDX | BPF_PROBE_MEMSX | BPF_H:
 	case BPF_LDX | BPF_PROBE_MEMSX | BPF_W:
-		if (ctx->fpb_offset > 0 && src == fp) {
+	case BPF_LDX | BPF_PROBE_MEM32 | BPF_B:
+	case BPF_LDX | BPF_PROBE_MEM32 | BPF_H:
+	case BPF_LDX | BPF_PROBE_MEM32 | BPF_W:
+	case BPF_LDX | BPF_PROBE_MEM32 | BPF_DW:
+		if (BPF_MODE(insn->code) == BPF_PROBE_MEM32) {
+			emit(A64_ADD(1, tmp2, src, pb), ctx);
+			src = tmp2;
+		}
+		if (ctx->fpb_offset > 0 && src == fp && BPF_MODE(insn->code) != BPF_PROBE_MEM32) {
 			src_adj = fpb;
 			off_adj = off + ctx->fpb_offset;
 		} else {
@@ -1322,7 +1345,15 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
 	case BPF_ST | BPF_MEM | BPF_H:
 	case BPF_ST | BPF_MEM | BPF_B:
 	case BPF_ST | BPF_MEM | BPF_DW:
-		if (ctx->fpb_offset > 0 && dst == fp) {
+	case BPF_ST | BPF_PROBE_MEM32 | BPF_B:
+	case BPF_ST | BPF_PROBE_MEM32 | BPF_H:
+	case BPF_ST | BPF_PROBE_MEM32 | BPF_W:
+	case BPF_ST | BPF_PROBE_MEM32 | BPF_DW:
+		if (BPF_MODE(insn->code) == BPF_PROBE_MEM32) {
+			emit(A64_ADD(1, tmp2, dst, pb), ctx);
+			dst = tmp2;
+		}
+		if (ctx->fpb_offset > 0 && dst == fp && BPF_MODE(insn->code) != BPF_PROBE_MEM32) {
 			dst_adj = fpb;
 			off_adj = off + ctx->fpb_offset;
 		} else {
@@ -1365,6 +1396,10 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
 			}
 			break;
 		}
+
+		ret = add_exception_handler(insn, ctx, dst);
+		if (ret)
+			return ret;
 		break;
 
 	/* STX: *(size *)(dst + off) = src */
@@ -1372,7 +1407,15 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
 	case BPF_STX | BPF_MEM | BPF_H:
 	case BPF_STX | BPF_MEM | BPF_B:
 	case BPF_STX | BPF_MEM | BPF_DW:
-		if (ctx->fpb_offset > 0 && dst == fp) {
+	case BPF_STX | BPF_PROBE_MEM32 | BPF_B:
+	case BPF_STX | BPF_PROBE_MEM32 | BPF_H:
+	case BPF_STX | BPF_PROBE_MEM32 | BPF_W:
+	case BPF_STX | BPF_PROBE_MEM32 | BPF_DW:
+		if (BPF_MODE(insn->code) == BPF_PROBE_MEM32) {
+			emit(A64_ADD(1, tmp2, dst, pb), ctx);
+			dst = tmp2;
+		}
+		if (ctx->fpb_offset > 0 && dst == fp && BPF_MODE(insn->code) != BPF_PROBE_MEM32) {
 			dst_adj = fpb;
 			off_adj = off + ctx->fpb_offset;
 		} else {
@@ -1413,6 +1456,10 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
 			}
 			break;
 		}
+
+		ret = add_exception_handler(insn, ctx, dst);
+		if (ret)
+			return ret;
 		break;
 
 	case BPF_STX | BPF_ATOMIC | BPF_W:
@@ -1594,6 +1641,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 	bool tmp_blinded = false;
 	bool extra_pass = false;
 	struct jit_ctx ctx;
+	u64 arena_vm_start;
 	u8 *image_ptr;
 	u8 *ro_image_ptr;
 
@@ -1611,6 +1659,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 		prog = tmp;
 	}
 
+	arena_vm_start = bpf_arena_get_kern_vm_start(prog->aux->arena);
 	jit_data = prog->aux->jit_data;
 	if (!jit_data) {
 		jit_data = kzalloc(sizeof(*jit_data), GFP_KERNEL);
@@ -1648,7 +1697,8 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 	 * BPF line info needs ctx->offset[i] to be the offset of
 	 * instruction[i] in jited image, so build prologue first.
 	 */
-	if (build_prologue(&ctx, was_classic, prog->aux->exception_cb)) {
+	if (build_prologue(&ctx, was_classic, prog->aux->exception_cb,
+			   arena_vm_start)) {
 		prog = orig_prog;
 		goto out_off;
 	}
@@ -1696,7 +1746,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 	ctx.idx = 0;
 	ctx.exentry_idx = 0;
 
-	build_prologue(&ctx, was_classic, prog->aux->exception_cb);
+	build_prologue(&ctx, was_classic, prog->aux->exception_cb, arena_vm_start);
 
 	if (build_body(&ctx, extra_pass)) {
 		prog = orig_prog;
Signature · 1 line
2.40.1
#2 lore raw

Re: [PATCH bpf-next 1/2] bpf: Add arm64 JIT support for PROBE_MEM32 pseudo instructions.

Quoted 14 lines · Puranjay Mohan

Add support for [LDX | STX | ST], PROBE_MEM32, [B | H | W | DW] instructions. They are similar to PROBE_MEM instructions with the following differences:
- PROBE_MEM32 supports store.
- PROBE_MEM32 relies on the verifier to clear upper 32-bit of the src/dst register
- PROBE_MEM32 adds 64-bit kern_vm_start address (which is stored in R28 in the prologue). Due to bpf_arena constructions such R28 + reg + off16 access is guaranteed to be within arena virtual range, so no address check at run-time.
- PROBE_MEM32 allows STX and ST. If they fault the store is a nop. When LDX faults the destination register is zeroed.

Quoted 6 lines

To support these on arm64, we do tmp2 = R28 + src/dst reg and then use tmp2 as the new src/dst register. This allows us to reuse most of the code for normal [LDX | STX | ST].

---

Hi Alexei,
Puranjay and I were discussing this stuff off list and noticed that atomic instructions are not handled.
It turns out that will cause a kernel crash right now because the 32-bit offset into arena will be dereferenced directly.

e.g. something like this:

@@ -55,6 +56,7 @@ int arena_list_add(void *ctx)

                test_val++;
                n->value = i;
                arena_sum += i;
+               __sync_fetch_and_add(&arena_sum, 0);
                list_add_head(&n->node, list_head);
        }

#else

I will try to prepare a fix for the x86 JIT. Puranjay will do the same for his set.

#3 lore raw

Re: [PATCH bpf-next 1/2] bpf: Add arm64 JIT support for PROBE_MEM32 pseudo instructions.

Quoted 39 lines · Kumar Kartikeya Dwivedi
Quoted 14 lines · Puranjay Mohan

Add support for [LDX | STX | ST], PROBE_MEM32, [B | H | W | DW] instructions. They are similar to PROBE_MEM instructions with the following differences:
- PROBE_MEM32 supports store.
- PROBE_MEM32 relies on the verifier to clear upper 32-bit of the src/dst register
- PROBE_MEM32 adds 64-bit kern_vm_start address (which is stored in R28 in the prologue). Due to bpf_arena constructions such R28 + reg + off16 access is guaranteed to be within arena virtual range, so no address check at run-time.
- PROBE_MEM32 allows STX and ST. If they fault the store is a nop. When LDX faults the destination register is zeroed.

Quoted 6 lines

To support these on arm64, we do tmp2 = R28 + src/dst reg and then use tmp2 as the new src/dst register. This allows us to reuse most of the code for normal [LDX | STX | ST].

---

Hi Alexei,
Puranjay and I were discussing this stuff off list and noticed that atomic instructions are not handled.
It turns out that will cause a kernel crash right now because the 32-bit offset into arena will be dereferenced directly.

e.g. something like this:

(quoted diff) +1 -0
@@ -55,6 +56,7 @@ int arena_list_add(void *ctx)
                test_val++;
                n->value = i;
                arena_sum += i;
+               __sync_fetch_and_add(&arena_sum, 0);
                list_add_head(&n->node, list_head);
        }
 #else
Quoted 2 lines

I will try to prepare a fix for the x86 JIT. Puranjay will do the same for his set.

Yes, testing the change mentioned by Kumar on ARM64 causes a crashes as well:

bpf_testmod: loading out-of-tree module taints kernel.
bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel

 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
 Mem abort info:
   ESR = 0x0000000096000006
   EC = 0x25: DABT (current EL), IL = 32 bits
   SET = 0, FnV = 0
   EA = 0, S1PTW = 0
   FSC = 0x06: level 2 translation fault
 Data abort info:
   ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000
   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
 user pgtable: 4k pages, 48-bit VAs, pgdp=00000004043cc000
 [0000000000000010] pgd=0800000410d8f003, p4d=0800000410d8f003, pud=0800000405972003, pmd=0000000000000000
 Internal error: Oops: 0000000096000006 [#1] SMP
 Modules linked in: bpf_testmod(OE) nls_ascii nls_cp437 sunrpc vfat fat aes_ce_blk aes_ce_cipher ghash_ce sha1_ce button sch_fq_codel dm_mod dax configfs dmi_sysfs sha2_ce sha256_arm64 efivarfs
 CPU: 8 PID: 5631 Comm: test_progs Tainted: G           OE      6.8.0+ #2
 Hardware name: Amazon EC2 c6g.16xlarge/, BIOS 1.0 11/1/2018
 pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
 pc : bpf_prog_8771c336cb6a18eb_arena_list_add+0x204/0x2b8
 lr : bpf_prog_8771c336cb6a18eb_arena_list_add+0x144/0x2b8
 sp : ffff80008b84bc30
 x29: ffff80008b84bca0 x28: ffff8000a5008000 x27: ffff80008b84bc38
 x26: 0000000000000000 x25: ffff80008b84bc60 x24: 0000000000000000
 x23: 0000000000000000 x22: 0000000000000058 x21: 0000000000000838
 x20: 0000000000000000 x19: 0000000100001fe0 x18: 0000000000000000
 x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffcc66d2c8
 x14: 0000000000000000 x13: 0000000000000000 x12: 000000000004058c
 x11: ffff8000a5008010 x10: 00000000ffffffff x9 : 00000000000002cf
 x8 : ffff800082ff4ab8 x7 : 0000000100001000 x6 : 0000000000000001
 x5 : 0000000010e5e3fd x4 : 000000003619b978 x3 : 0000000000000010
 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000001fe0
 Call trace:
  bpf_prog_8771c336cb6a18eb_arena_list_add+0x204/0x2b8
  bpf_prog_test_run_syscall+0x100/0x340
  __sys_bpf+0x8e8/0xa20
  __arm64_sys_bpf+0x2c/0x48
  invoke_syscall+0x50/0x128
  el0_svc_common.constprop.0+0x48/0xf8
  do_el0_svc+0x28/0x40
  el0_svc+0x58/0x190
  el0t_64_sync_handler+0x13c/0x158
  el0t_64_sync+0x1a8/0x1b0
 Code: 8b010042 8b1c006b f9000162 d2800001 (f821307f)
 ---[ end trace 0000000000000000 ]---
 Kernel panic - not syncing: Oops: Fatal exception
 SMP: stopping secondary CPUs
 Kernel Offset: disabled
 CPU features: 0x0,00000120,7002014a,21407a0b
 Memory Limit: none
 Rebooting in 5 seconds..

I will send v2 with the arm64 JIT fix, but I guess verifier has to be modified as well to add BPF_PROBE_MEM32 to atomic instructions.

Thanks,
Puranjay

#4 lore raw

Re: [PATCH bpf-next 1/2] bpf: Add arm64 JIT support for PROBE_MEM32 pseudo instructions.

Quoted 100 lines · Puranjay Mohan
Quoted 39 lines · Kumar Kartikeya Dwivedi
Quoted 14 lines · Puranjay Mohan

Add support for [LDX | STX | ST], PROBE_MEM32, [B | H | W | DW] instructions. They are similar to PROBE_MEM instructions with the following differences:
- PROBE_MEM32 supports store.
- PROBE_MEM32 relies on the verifier to clear upper 32-bit of the src/dst register
- PROBE_MEM32 adds 64-bit kern_vm_start address (which is stored in R28 in the prologue). Due to bpf_arena constructions such R28 + reg + off16 access is guaranteed to be within arena virtual range, so no address check at run-time.
- PROBE_MEM32 allows STX and ST. If they fault the store is a nop. When LDX faults the destination register is zeroed.

Quoted 6 lines

To support these on arm64, we do tmp2 = R28 + src/dst reg and then use tmp2 as the new src/dst register. This allows us to reuse most of the code for normal [LDX | STX | ST].

---

Hi Alexei,
Puranjay and I were discussing this stuff off list and noticed that atomic instructions are not handled.
It turns out that will cause a kernel crash right now because the 32-bit offset into arena will be dereferenced directly.

e.g. something like this:

(quoted diff) +1 -0
@@ -55,6 +56,7 @@ int arena_list_add(void *ctx)
                test_val++;
                n->value = i;
                arena_sum += i;
+               __sync_fetch_and_add(&arena_sum, 0);
                list_add_head(&n->node, list_head);
        }
 #else
Quoted 2 lines

I will try to prepare a fix for the x86 JIT. Puranjay will do the same for his set.

Yes, testing the change mentioned by Kumar on ARM64 causes a crashes as well:

bpf_testmod: loading out-of-tree module taints kernel.
bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel

 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
 Mem abort info:
   ESR = 0x0000000096000006
   EC = 0x25: DABT (current EL), IL = 32 bits
   SET = 0, FnV = 0
   EA = 0, S1PTW = 0
   FSC = 0x06: level 2 translation fault
 Data abort info:
   ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000
   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
 user pgtable: 4k pages, 48-bit VAs, pgdp=00000004043cc000
 [0000000000000010] pgd=0800000410d8f003, p4d=0800000410d8f003, pud=0800000405972003, pmd=0000000000000000
 Internal error: Oops: 0000000096000006 [#1] SMP
 Modules linked in: bpf_testmod(OE) nls_ascii nls_cp437 sunrpc vfat fat aes_ce_blk aes_ce_cipher ghash_ce sha1_ce button sch_fq_codel dm_mod dax configfs dmi_sysfs sha2_ce sha256_arm64 efivarfs
 CPU: 8 PID: 5631 Comm: test_progs Tainted: G           OE      6.8.0+ #2
 Hardware name: Amazon EC2 c6g.16xlarge/, BIOS 1.0 11/1/2018
 pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
 pc : bpf_prog_8771c336cb6a18eb_arena_list_add+0x204/0x2b8
 lr : bpf_prog_8771c336cb6a18eb_arena_list_add+0x144/0x2b8
 sp : ffff80008b84bc30
 x29: ffff80008b84bca0 x28: ffff8000a5008000 x27: ffff80008b84bc38
 x26: 0000000000000000 x25: ffff80008b84bc60 x24: 0000000000000000
 x23: 0000000000000000 x22: 0000000000000058 x21: 0000000000000838
 x20: 0000000000000000 x19: 0000000100001fe0 x18: 0000000000000000
 x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffcc66d2c8
 x14: 0000000000000000 x13: 0000000000000000 x12: 000000000004058c
 x11: ffff8000a5008010 x10: 00000000ffffffff x9 : 00000000000002cf
 x8 : ffff800082ff4ab8 x7 : 0000000100001000 x6 : 0000000000000001
 x5 : 0000000010e5e3fd x4 : 000000003619b978 x3 : 0000000000000010
 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000001fe0
 Call trace:
  bpf_prog_8771c336cb6a18eb_arena_list_add+0x204/0x2b8
  bpf_prog_test_run_syscall+0x100/0x340
  __sys_bpf+0x8e8/0xa20
  __arm64_sys_bpf+0x2c/0x48
  invoke_syscall+0x50/0x128
  el0_svc_common.constprop.0+0x48/0xf8
  do_el0_svc+0x28/0x40
  el0_svc+0x58/0x190
  el0t_64_sync_handler+0x13c/0x158
  el0t_64_sync+0x1a8/0x1b0
 Code: 8b010042 8b1c006b f9000162 d2800001 (f821307f)
 ---[ end trace 0000000000000000 ]---
 Kernel panic - not syncing: Oops: Fatal exception
 SMP: stopping secondary CPUs
 Kernel Offset: disabled
 CPU features: 0x0,00000120,7002014a,21407a0b
 Memory Limit: none
 Rebooting in 5 seconds..
Quoted 2 lines

I will send v2 with the arm64 JIT fix, but I guess verifier has to be modified as well to add BPF_PROBE_MEM32 to atomic instructions.

The JIT and the verifier changes for atomics might be too big. Let's disable atomics in arena in the verifier for now. Pls send a patch.

#5 lore raw

Re: [PATCH bpf-next 1/2] bpf: Add arm64 JIT support for PROBE_MEM32 pseudo instructions.

Quoted 102 lines · Alexei Starovoitov
Quoted 100 lines · Puranjay Mohan
Quoted 39 lines · Kumar Kartikeya Dwivedi
Quoted 14 lines · Puranjay Mohan

Add support for [LDX | STX | ST], PROBE_MEM32, [B | H | W | DW] instructions. They are similar to PROBE_MEM instructions with the following differences:
- PROBE_MEM32 supports store.
- PROBE_MEM32 relies on the verifier to clear upper 32-bit of the src/dst register
- PROBE_MEM32 adds 64-bit kern_vm_start address (which is stored in R28 in the prologue). Due to bpf_arena constructions such R28 + reg + off16 access is guaranteed to be within arena virtual range, so no address check at run-time.
- PROBE_MEM32 allows STX and ST. If they fault the store is a nop. When LDX faults the destination register is zeroed.

Quoted 6 lines

To support these on arm64, we do tmp2 = R28 + src/dst reg and then use tmp2 as the new src/dst register. This allows us to reuse most of the code for normal [LDX | STX | ST].

---

Hi Alexei,
Puranjay and I were discussing this stuff off list and noticed that atomic instructions are not handled.
It turns out that will cause a kernel crash right now because the 32-bit offset into arena will be dereferenced directly.

e.g. something like this:

(quoted diff) +1 -0
@@ -55,6 +56,7 @@ int arena_list_add(void *ctx)
                test_val++;
                n->value = i;
                arena_sum += i;
+               __sync_fetch_and_add(&arena_sum, 0);
                list_add_head(&n->node, list_head);
        }
 #else
Quoted 2 lines

I will try to prepare a fix for the x86 JIT. Puranjay will do the same for his set.

Yes, testing the change mentioned by Kumar on ARM64 causes a crashes as well:

bpf_testmod: loading out-of-tree module taints kernel.
bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel

 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
 Mem abort info:
   ESR = 0x0000000096000006
   EC = 0x25: DABT (current EL), IL = 32 bits
   SET = 0, FnV = 0
   EA = 0, S1PTW = 0
   FSC = 0x06: level 2 translation fault
 Data abort info:
   ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000
   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
 user pgtable: 4k pages, 48-bit VAs, pgdp=00000004043cc000
 [0000000000000010] pgd=0800000410d8f003, p4d=0800000410d8f003, pud=0800000405972003, pmd=0000000000000000
 Internal error: Oops: 0000000096000006 [#1] SMP
 Modules linked in: bpf_testmod(OE) nls_ascii nls_cp437 sunrpc vfat fat aes_ce_blk aes_ce_cipher ghash_ce sha1_ce button sch_fq_codel dm_mod dax configfs dmi_sysfs sha2_ce sha256_arm64 efivarfs
 CPU: 8 PID: 5631 Comm: test_progs Tainted: G           OE      6.8.0+ #2
 Hardware name: Amazon EC2 c6g.16xlarge/, BIOS 1.0 11/1/2018
 pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
 pc : bpf_prog_8771c336cb6a18eb_arena_list_add+0x204/0x2b8
 lr : bpf_prog_8771c336cb6a18eb_arena_list_add+0x144/0x2b8
 sp : ffff80008b84bc30
 x29: ffff80008b84bca0 x28: ffff8000a5008000 x27: ffff80008b84bc38
 x26: 0000000000000000 x25: ffff80008b84bc60 x24: 0000000000000000
 x23: 0000000000000000 x22: 0000000000000058 x21: 0000000000000838
 x20: 0000000000000000 x19: 0000000100001fe0 x18: 0000000000000000
 x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffcc66d2c8
 x14: 0000000000000000 x13: 0000000000000000 x12: 000000000004058c
 x11: ffff8000a5008010 x10: 00000000ffffffff x9 : 00000000000002cf
 x8 : ffff800082ff4ab8 x7 : 0000000100001000 x6 : 0000000000000001
 x5 : 0000000010e5e3fd x4 : 000000003619b978 x3 : 0000000000000010
 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000001fe0
 Call trace:
  bpf_prog_8771c336cb6a18eb_arena_list_add+0x204/0x2b8
  bpf_prog_test_run_syscall+0x100/0x340
  __sys_bpf+0x8e8/0xa20
  __arm64_sys_bpf+0x2c/0x48
  invoke_syscall+0x50/0x128
  el0_svc_common.constprop.0+0x48/0xf8
  do_el0_svc+0x28/0x40
  el0_svc+0x58/0x190
  el0t_64_sync_handler+0x13c/0x158
  el0t_64_sync+0x1a8/0x1b0
 Code: 8b010042 8b1c006b f9000162 d2800001 (f821307f)
 ---[ end trace 0000000000000000 ]---
 Kernel panic - not syncing: Oops: Fatal exception
 SMP: stopping secondary CPUs
 Kernel Offset: disabled
 CPU features: 0x0,00000120,7002014a,21407a0b
 Memory Limit: none
 Rebooting in 5 seconds..
Quoted 6 lines
Quoted 2 lines

I will send v2 with the arm64 JIT fix, but I guess verifier has to be modified as well to add BPF_PROBE_MEM32 to atomic instructions.

The JIT and the verifier changes for atomics might be too big. Let's disable atomics in arena in the verifier for now. Pls send a patch.

As atomics are disabled in the Arena now, this series will not require any changes.
Looking forward to the reviews.

Thanks,
Puranjay

#6 lore raw

PATCH 2/2 bpf: Add arm64 JIT support for bpf_addr_space_cast instruction.

In reply to Puranjay Mohan

LLVM generates bpf_addr_space_cast instruction while translating pointers between native (zero) address space and __attribute__((address_space(N))). The addr_space=1 is reserved as bpf_arena address space.

rY = addr_space_cast(rX, 0, 1) is processed by the verifier and converted to normal 32-bit move: wX = wY

rY = addr_space_cast(rX, 1, 0) has to be converted by JIT:

Here I explain using symbolic language what the JIT is supposed to do:
We have:

	src = [src_upper32][src_lower32] // 64 bit src kernel pointer
	uvm = [uvm_upper32][uvm_lower32] // 64 bit user_vm_start

The JIT has to make the dst reg like following

	dst = [uvm_upper32][src_lower32] // if src_lower32 != 0
	dst = [00000000000][00000000000] // if src_lower32 == 0
---
 arch/arm64/net/bpf_jit.h                     |  1 +
 arch/arm64/net/bpf_jit_comp.c                | 35 ++++++++++++++++++++
 tools/testing/selftests/bpf/DENYLIST.aarch64 |  2 --
 3 files changed, 36 insertions(+), 2 deletions(-)
arch/arm64/net/bpf_jit.h +1 -0
index 23b1b34db088..813c3c428fde 100644
@@ -238,6 +238,7 @@
 #define A64_LSLV(sf, Rd, Rn, Rm) A64_DATA2(sf, Rd, Rn, Rm, LSLV)
 #define A64_LSRV(sf, Rd, Rn, Rm) A64_DATA2(sf, Rd, Rn, Rm, LSRV)
 #define A64_ASRV(sf, Rd, Rn, Rm) A64_DATA2(sf, Rd, Rn, Rm, ASRV)
+#define A64_RORV(sf, Rd, Rn, Rm) A64_DATA2(sf, Rd, Rn, Rm, RORV)
 
 /* Data-processing (3 source) */
 /* Rd = Ra + Rn * Rm */
arch/arm64/net/bpf_jit_comp.c +35 -0
index ce66c17b73a0..e12e0df3ad1a 100644
@@ -82,6 +82,7 @@ struct jit_ctx {
 	__le32 *ro_image;
 	u32 stack_size;
 	int fpb_offset;
+	u64 user_vm_start;
 };
 
 struct bpf_plt {
@@ -868,6 +869,34 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
 	/* dst = src */
 	case BPF_ALU | BPF_MOV | BPF_X:
 	case BPF_ALU64 | BPF_MOV | BPF_X:
+		if (insn->off == BPF_ADDR_SPACE_CAST &&
+		    insn->imm == 1U << 16) {
+			/* Zero out tmp2 */
+			emit(A64_EOR(1, tmp2, tmp2, tmp2), ctx);
+
+			/* Move lo_32_bits(src) to dst */
+			if (dst != src)
+				emit(A64_MOV(0, dst, src), ctx);
+
+			/* Logical shift left by 32 bits */
+			emit(A64_LSL(1, dst, dst, 32), ctx);
+
+			/* Get upper 32 bits of user_vm_start in tmp */
+			emit_a64_mov_i(0, tmp, ctx->user_vm_start >> 32, ctx);
+
+			/* dst |= up_32_bits(user_vm_start) */
+			emit(A64_ORR(1, dst, dst, tmp), ctx);
+
+			/* Rotate by 32 bits to get final result */
+			emit_a64_mov_i(0, tmp, 32, ctx);
+			emit(A64_RORV(1, dst, dst, tmp), ctx);
+
+			/* If lo_32_bits(dst) == 0, set dst = tmp2(0) */
+			emit(A64_CBZ(0, dst, 2), ctx);
+			emit(A64_MOV(1, tmp2, dst), ctx);
+			emit(A64_MOV(1, dst, tmp2), ctx);
+		break;
+		}
 		switch (insn->off) {
 		case 0:
 			emit(A64_MOV(is64, dst, src), ctx);
@@ -1690,6 +1719,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 	}
 
 	ctx.fpb_offset = find_fpb_offset(prog);
+	ctx.user_vm_start = bpf_arena_get_user_vm_start(prog->aux->arena);
 
 	/*
 	 * 1. Initial fake pass to compute ctx->idx and ctx->offset.
@@ -2514,6 +2544,11 @@ bool bpf_jit_supports_exceptions(void)
 	return true;
 }
 
+bool bpf_jit_supports_arena(void)
+{
+	return true;
+}
+
 void bpf_jit_free(struct bpf_prog *prog)
 {
 	if (prog->jited) {
tools/testing/selftests/bpf/DENYLIST.aarch64 +0 -2
index d8ade15e2789..0445ac38bc07 100644
@@ -10,5 +10,3 @@ fill_link_info/kprobe_multi_link_info            # bpf_program__attach_kprobe_mu
 fill_link_info/kretprobe_multi_link_info         # bpf_program__attach_kprobe_multi_opts unexpected error: -95
 fill_link_info/kprobe_multi_invalid_ubuff        # bpf_program__attach_kprobe_multi_opts unexpected error: -95
 missed/kprobe_recursion                          # missed_kprobe_recursion__attach unexpected error: -95 (errno 95)
-verifier_arena                                   # JIT does not support arena
-arena_htab                                       # JIT does not support arena
Signature · 1 line
2.40.1