Skip to contentSkip to conversation

mm: zswap: fix kernel BUG in sg_init_one

PATCH Applied Barry Song 4 participants 5 messages Mar 18, 2024 – Mar 19, 2024

Subsystems (2)
lore
Share & tools
lore

Barry Song

author
#0 lore raw

PATCH v2 1/1 mm: zswap: fix kernel BUG in sg_init_one

From: Barry Song <[email protected]>

sg_init_one() relies on linearly mapped low memory for the safe utilization of virt_to_page(). Otherwise, we trigger a kernel BUG,

kernel BUG at include/linux/scatterlist.h:187!

Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 2997 Comm: syz-executor198 Not tainted 6.8.0-syzkaller #0
Hardware name: ARM-Versatile Express
PC is at sg_set_buf include/linux/scatterlist.h:187 [inline]
PC is at sg_init_one+0x9c/0xa8 lib/scatterlist.c:143
LR is at sg_init_table+0x2c/0x40 lib/scatterlist.c:128
Backtrace: 
[<807e16ac>] (sg_init_one) from [<804c1824>] (zswap_decompress+0xbc/0x208 mm/zswap.c:1089)
 r7:83471c80 r6:def6d08c r5:844847d0 r4:ff7e7ef4
[<804c1768>] (zswap_decompress) from [<804c4468>] (zswap_load+0x15c/0x198 mm/zswap.c:1637)
 r9:8446eb80 r8:8446eb80 r7:8446eb84 r6:def6d08c r5:00000001 r4:844847d0
[<804c430c>] (zswap_load) from [<804b9644>] (swap_read_folio+0xa8/0x498 mm/page_io.c:518)
 r9:844ac800 r8:835e6c00 r7:00000000 r6:df955d4c r5:00000001 r4:def6d08c
[<804b959c>] (swap_read_folio) from [<804bb064>] (swap_cluster_readahead+0x1c4/0x34c mm/swap_state.c:684)
 r10:00000000 r9:00000007 r8:df955d4b r7:00000000 r6:00000000 r5:00100cca
 r4:00000001
[<804baea0>] (swap_cluster_readahead) from [<804bb3b8>] (swapin_readahead+0x68/0x4a8 mm/swap_state.c:904)
 r10:df955eb8 r9:00000000 r8:00100cca r7:84476480 r6:00000001 r5:00000000
 r4:00000001
[<804bb350>] (swapin_readahead) from [<8047cde0>] (do_swap_page+0x200/0xcc4 mm/memory.c:4046)
 r10:00000040 r9:00000000 r8:844ac800 r7:84476480 r6:00000001 r5:00000000
 r4:df955eb8

[<8047cbe0>] (do_swap_page) from [<8047e6c4>] (handle_pte_fault mm/memory.c:5301 [inline]) [<8047cbe0>] (do_swap_page) from [<8047e6c4>] (__handle_mm_fault mm/memory.c:5439 [inline]) [<8047cbe0>] (do_swap_page) from [<8047e6c4>] (handle_mm_fault+0x3d8/0x12b8 mm/memory.c:5604)
r10:00000040 r9:842b3900 r8:7eb0d000 r7:84476480 r6:7eb0d000 r5:835e6c00
r4:00000254
[<8047e2ec>] (handle_mm_fault) from [<80215d28>] (do_page_fault+0x148/0x3a8 arch/arm/mm/fault.c:326)
r10:00000007 r9:842b3900 r8:7eb0d000 r7:00000207 r6:00000254 r5:7eb0d9b4
r4:df955fb0
[<80215be0>] (do_page_fault) from [<80216170>] (do_DataAbort+0x38/0xa8 arch/arm/mm/fault.c:558)
r10:7eb0da7c r9:00000000 r8:80215be0 r7:df955fb0 r6:7eb0d9b4 r5:00000207
r4:8261d0e0
[<80216138>] (do_DataAbort) from [<80200e3c>] (__dabt_usr+0x5c/0x60 arch/arm/kernel/entry-armv.S:427)

Exception stack(0xdf955fb0 to 0xdf955ff8)

5fa0: 00000000 00000000 22d5f800 0008d158
5fc0: 00000000 7eb0d9a4 00000000 00000109 00000000 00000000 7eb0da7c 7eb0da3c 5fe0: 00000000 7eb0d9a0 00000001 00066bd4 00000010 ffffffff
r8:824a9044 r7:835e6c00 r6:ffffffff r5:00000010 r4:00066bd4

Code: 1a000004 e1822003 e8860094 e89da8f0 (e7f001f2) 
---[ end trace 0000000000000000 ]---
----------------
Code disassembly (best guess):
   0:	1a000004 	bne	0x18
   4:	e1822003 	orr	r2, r2, r3
   8:	e8860094 	stm	r6, {r2, r4, r7}
   c:	e89da8f0 	ldm	sp, {r4, r5, r6, r7, fp, sp, pc}
* 10:	e7f001f2 	udf	#18 <-- trapping instruction

Consequently, we have two choices: either employ kmap_to_page() alongside sg_set_page(), or resort to copying high memory contents to a temporary buffer residing in low memory. However, considering the introduction of the WARN_ON_ONCE in commit ef6e06b2ef870 ("highmem: fix kmap_to_page() for kmap_local_page() addresses"), which specifically addresses high memory concerns, it appears that memcpy remains the sole viable option.

Reported-and-tested-by [email protected]
Fixes 270700dd06ca ("mm/zswap: remove the memcpy if acomp is not sleepable")

---
-v2:
add comments according to Yosry

 mm/zswap.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)
mm/zswap.c +12 -2
index 9dec853647c8..dbd9f745fa8f 100644
@@ -1080,7 +1080,17 @@ static void zswap_decompress(struct zswap_entry *entry, struct page *page)
 	mutex_lock(&acomp_ctx->mutex);
 
 	src = zpool_map_handle(zpool, entry->handle, ZPOOL_MM_RO);
-	if (acomp_ctx->is_sleepable && !zpool_can_sleep_mapped(zpool)) {
+	/*
+	 * If zpool_map_handle is atomic, we cannot reliably utilize its mapped buffer
+	 * to do crypto_acomp_decompress() which might sleep. In such cases, we must
+	 * resort to copying the buffer to a temporary one.
+	 * Meanwhile, zpool_map_handle() might return a non-linearly mapped buffer,
+	 * such as a kmap address of high memory or even ever a vmap address.
+	 * However, sg_init_one is only equipped to handle linearly mapped low memory.
+	 * In such cases, we also must copy the buffer to a temporary and lowmem one.
+	 */
+	if ((acomp_ctx->is_sleepable && !zpool_can_sleep_mapped(zpool)) ||
+	    !virt_addr_valid(src)) {
 		memcpy(acomp_ctx->buffer, src, entry->length);
 		src = acomp_ctx->buffer;
 		zpool_unmap_handle(zpool, entry->handle);
@@ -1094,7 +1104,7 @@ static void zswap_decompress(struct zswap_entry *entry, struct page *page)
 	BUG_ON(acomp_ctx->req->dlen != PAGE_SIZE);
 	mutex_unlock(&acomp_ctx->mutex);
 
-	if (!acomp_ctx->is_sleepable || zpool_can_sleep_mapped(zpool))
+	if (src != acomp_ctx->buffer)
 		zpool_unmap_handle(zpool, entry->handle);
 }
 
Signature · 1 line
2.34.1
Acked-by on v2 1/1
#1 lore raw
Quoted 84 lines · Barry Song

From: Barry Song <[email protected]>

sg_init_one() relies on linearly mapped low memory for the safe utilization of virt_to_page(). Otherwise, we trigger a kernel BUG,

kernel BUG at include/linux/scatterlist.h:187!

Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 2997 Comm: syz-executor198 Not tainted 6.8.0-syzkaller #0
Hardware name: ARM-Versatile Express
PC is at sg_set_buf include/linux/scatterlist.h:187 [inline]
PC is at sg_init_one+0x9c/0xa8 lib/scatterlist.c:143
LR is at sg_init_table+0x2c/0x40 lib/scatterlist.c:128
Backtrace: 
[<807e16ac>] (sg_init_one) from [<804c1824>] (zswap_decompress+0xbc/0x208 mm/zswap.c:1089)
 r7:83471c80 r6:def6d08c r5:844847d0 r4:ff7e7ef4
[<804c1768>] (zswap_decompress) from [<804c4468>] (zswap_load+0x15c/0x198 mm/zswap.c:1637)
 r9:8446eb80 r8:8446eb80 r7:8446eb84 r6:def6d08c r5:00000001 r4:844847d0
[<804c430c>] (zswap_load) from [<804b9644>] (swap_read_folio+0xa8/0x498 mm/page_io.c:518)
 r9:844ac800 r8:835e6c00 r7:00000000 r6:df955d4c r5:00000001 r4:def6d08c
[<804b959c>] (swap_read_folio) from [<804bb064>] (swap_cluster_readahead+0x1c4/0x34c mm/swap_state.c:684)
 r10:00000000 r9:00000007 r8:df955d4b r7:00000000 r6:00000000 r5:00100cca
 r4:00000001
[<804baea0>] (swap_cluster_readahead) from [<804bb3b8>] (swapin_readahead+0x68/0x4a8 mm/swap_state.c:904)
 r10:df955eb8 r9:00000000 r8:00100cca r7:84476480 r6:00000001 r5:00000000
 r4:00000001
[<804bb350>] (swapin_readahead) from [<8047cde0>] (do_swap_page+0x200/0xcc4 mm/memory.c:4046)
 r10:00000040 r9:00000000 r8:844ac800 r7:84476480 r6:00000001 r5:00000000
 r4:df955eb8

[<8047cbe0>] (do_swap_page) from [<8047e6c4>] (handle_pte_fault mm/memory.c:5301 [inline]) [<8047cbe0>] (do_swap_page) from [<8047e6c4>] (__handle_mm_fault mm/memory.c:5439 [inline]) [<8047cbe0>] (do_swap_page) from [<8047e6c4>] (handle_mm_fault+0x3d8/0x12b8 mm/memory.c:5604)
r10:00000040 r9:842b3900 r8:7eb0d000 r7:84476480 r6:7eb0d000 r5:835e6c00
r4:00000254
[<8047e2ec>] (handle_mm_fault) from [<80215d28>] (do_page_fault+0x148/0x3a8 arch/arm/mm/fault.c:326)
r10:00000007 r9:842b3900 r8:7eb0d000 r7:00000207 r6:00000254 r5:7eb0d9b4
r4:df955fb0
[<80215be0>] (do_page_fault) from [<80216170>] (do_DataAbort+0x38/0xa8 arch/arm/mm/fault.c:558)
r10:7eb0da7c r9:00000000 r8:80215be0 r7:df955fb0 r6:7eb0d9b4 r5:00000207
r4:8261d0e0
[<80216138>] (do_DataAbort) from [<80200e3c>] (__dabt_usr+0x5c/0x60 arch/arm/kernel/entry-armv.S:427)

Exception stack(0xdf955fb0 to 0xdf955ff8)

5fa0: 00000000 00000000 22d5f800 0008d158
5fc0: 00000000 7eb0d9a4 00000000 00000109 00000000 00000000 7eb0da7c 7eb0da3c 5fe0: 00000000 7eb0d9a0 00000001 00066bd4 00000010 ffffffff
r8:824a9044 r7:835e6c00 r6:ffffffff r5:00000010 r4:00066bd4

Code: 1a000004 e1822003 e8860094 e89da8f0 (e7f001f2) 
---[ end trace 0000000000000000 ]---
----------------
Code disassembly (best guess):
   0:	1a000004 	bne	0x18
   4:	e1822003 	orr	r2, r2, r3
   8:	e8860094 	stm	r6, {r2, r4, r7}
   c:	e89da8f0 	ldm	sp, {r4, r5, r6, r7, fp, sp, pc}
* 10:	e7f001f2 	udf	#18 <-- trapping instruction

Consequently, we have two choices: either employ kmap_to_page() alongside sg_set_page(), or resort to copying high memory contents to a temporary buffer residing in low memory. However, considering the introduction of the WARN_ON_ONCE in commit ef6e06b2ef870 ("highmem: fix kmap_to_page() for kmap_local_page() addresses"), which specifically addresses high memory concerns, it appears that memcpy remains the sole viable option.

Reported-and-tested-by [email protected]
Fixes 270700dd06ca ("mm/zswap: remove the memcpy if acomp is not sleepable")

---
-v2:
add comments according to Yosry

 mm/zswap.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)
mm/zswap.c +0 -0
index 9dec853647c8..dbd9f745fa8f 100644
@@ -1080,7 +1080,17 @@ static void zswap_decompress(struct zswap_entry *entry, struct page *page)
 	mutex_lock(&acomp_ctx->mutex);
 
 	src = zpool_map_handle(zpool, entry->handle, ZPOOL_MM_RO);

mm/zswap.c static void zswap_decompress(struct zswap_entry *entry, struct page *page) · line 1091

Quoted 10 lines
mm/zswap.c +9 -1
-	if (acomp_ctx->is_sleepable && !zpool_can_sleep_mapped(zpool)) {
+	/*
+	 * If zpool_map_handle is atomic, we cannot reliably utilize its mapped buffer
+	 * to do crypto_acomp_decompress() which might sleep. In such cases, we must
+	 * resort to copying the buffer to a temporary one.
+	 * Meanwhile, zpool_map_handle() might return a non-linearly mapped buffer,
+	 * such as a kmap address of high memory or even ever a vmap address.
+	 * However, sg_init_one is only equipped to handle linearly mapped low memory.
+	 * In such cases, we also must copy the buffer to a temporary and lowmem one.
+	 */

Can I interest you in something simpler? :)

/*
* There are two cases where we cannot directly use the pointer returned
* by zpool_map_handle() during decompression and use a buffer instead:
* 1. zpool_map_handle() is atomic but crypto_acomp_decompress() is not.
* 2. The pointer is not in the direct map, so it cannot be used by
* sg_init_one().
*/

Whether you take it or not, feel free to add:

author
#2 lore raw
Quoted 107 lines · Yosry Ahmed
Quoted 84 lines · Barry Song

From: Barry Song <[email protected]>

sg_init_one() relies on linearly mapped low memory for the safe utilization of virt_to_page(). Otherwise, we trigger a kernel BUG,

kernel BUG at include/linux/scatterlist.h:187!

Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 2997 Comm: syz-executor198 Not tainted 6.8.0-syzkaller #0
Hardware name: ARM-Versatile Express
PC is at sg_set_buf include/linux/scatterlist.h:187 [inline]
PC is at sg_init_one+0x9c/0xa8 lib/scatterlist.c:143
LR is at sg_init_table+0x2c/0x40 lib/scatterlist.c:128
Backtrace:
[<807e16ac>] (sg_init_one) from [<804c1824>] (zswap_decompress+0xbc/0x208 mm/zswap.c:1089)
 r7:83471c80 r6:def6d08c r5:844847d0 r4:ff7e7ef4
[<804c1768>] (zswap_decompress) from [<804c4468>] (zswap_load+0x15c/0x198 mm/zswap.c:1637)
 r9:8446eb80 r8:8446eb80 r7:8446eb84 r6:def6d08c r5:00000001 r4:844847d0
[<804c430c>] (zswap_load) from [<804b9644>] (swap_read_folio+0xa8/0x498 mm/page_io.c:518)
 r9:844ac800 r8:835e6c00 r7:00000000 r6:df955d4c r5:00000001 r4:def6d08c
[<804b959c>] (swap_read_folio) from [<804bb064>] (swap_cluster_readahead+0x1c4/0x34c mm/swap_state.c:684)
 r10:00000000 r9:00000007 r8:df955d4b r7:00000000 r6:00000000 r5:00100cca
 r4:00000001
[<804baea0>] (swap_cluster_readahead) from [<804bb3b8>] (swapin_readahead+0x68/0x4a8 mm/swap_state.c:904)
 r10:df955eb8 r9:00000000 r8:00100cca r7:84476480 r6:00000001 r5:00000000
 r4:00000001
[<804bb350>] (swapin_readahead) from [<8047cde0>] (do_swap_page+0x200/0xcc4 mm/memory.c:4046)
 r10:00000040 r9:00000000 r8:844ac800 r7:84476480 r6:00000001 r5:00000000
 r4:df955eb8

[<8047cbe0>] (do_swap_page) from [<8047e6c4>] (handle_pte_fault mm/memory.c:5301 [inline]) [<8047cbe0>] (do_swap_page) from [<8047e6c4>] (__handle_mm_fault mm/memory.c:5439 [inline]) [<8047cbe0>] (do_swap_page) from [<8047e6c4>] (handle_mm_fault+0x3d8/0x12b8 mm/memory.c:5604)
r10:00000040 r9:842b3900 r8:7eb0d000 r7:84476480 r6:7eb0d000 r5:835e6c00
r4:00000254
[<8047e2ec>] (handle_mm_fault) from [<80215d28>] (do_page_fault+0x148/0x3a8 arch/arm/mm/fault.c:326)
r10:00000007 r9:842b3900 r8:7eb0d000 r7:00000207 r6:00000254 r5:7eb0d9b4
r4:df955fb0
[<80215be0>] (do_page_fault) from [<80216170>] (do_DataAbort+0x38/0xa8 arch/arm/mm/fault.c:558)
r10:7eb0da7c r9:00000000 r8:80215be0 r7:df955fb0 r6:7eb0d9b4 r5:00000207
r4:8261d0e0
[<80216138>] (do_DataAbort) from [<80200e3c>] (__dabt_usr+0x5c/0x60 arch/arm/kernel/entry-armv.S:427)

Exception stack(0xdf955fb0 to 0xdf955ff8)

5fa0: 00000000 00000000 22d5f800 0008d158
5fc0: 00000000 7eb0d9a4 00000000 00000109 00000000 00000000 7eb0da7c 7eb0da3c 5fe0: 00000000 7eb0d9a0 00000001 00066bd4 00000010 ffffffff
r8:824a9044 r7:835e6c00 r6:ffffffff r5:00000010 r4:00066bd4

Code: 1a000004 e1822003 e8860094 e89da8f0 (e7f001f2)
---[ end trace 0000000000000000 ]---
----------------
Code disassembly (best guess):
   0: 1a000004        bne     0x18
   4: e1822003        orr     r2, r2, r3
   8: e8860094        stm     r6, {r2, r4, r7}
   c: e89da8f0        ldm     sp, {r4, r5, r6, r7, fp, sp, pc}

* 10: e7f001f2 udf #18 <-- trapping instruction

Consequently, we have two choices: either employ kmap_to_page() alongside sg_set_page(), or resort to copying high memory contents to a temporary buffer residing in low memory. However, considering the introduction of the WARN_ON_ONCE in commit ef6e06b2ef870 ("highmem: fix kmap_to_page() for kmap_local_page() addresses"), which specifically addresses high memory concerns, it appears that memcpy remains the sole viable option.

Reported-and-tested-by [email protected]
Fixes 270700dd06ca ("mm/zswap: remove the memcpy if acomp is not sleepable")

---
-v2:
add comments according to Yosry

 mm/zswap.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)
mm/zswap.c +0 -0
index 9dec853647c8..dbd9f745fa8f 100644
@@ -1080,7 +1080,17 @@ static void zswap_decompress(struct zswap_entry *entry, struct page *page)
      mutex_lock(&acomp_ctx->mutex);
 
      src = zpool_map_handle(zpool, entry->handle, ZPOOL_MM_RO);

mm/zswap.c static void zswap_decompress(struct zswap_entry *entry, struct page *page) · line 1091

Quoted 10 lines
mm/zswap.c +9 -1
-     if (acomp_ctx->is_sleepable && !zpool_can_sleep_mapped(zpool)) {
+     /*
+      * If zpool_map_handle is atomic, we cannot reliably utilize its mapped buffer
+      * to do crypto_acomp_decompress() which might sleep. In such cases, we must
+      * resort to copying the buffer to a temporary one.
+      * Meanwhile, zpool_map_handle() might return a non-linearly mapped buffer,
+      * such as a kmap address of high memory or even ever a vmap address.
+      * However, sg_init_one is only equipped to handle linearly mapped low memory.
+      * In such cases, we also must copy the buffer to a temporary and lowmem one.
+      */

Can I interest you in something simpler? :)

/*
* There are two cases where we cannot directly use the pointer returned
* by zpool_map_handle() during decompression and use a buffer instead:
* 1. zpool_map_handle() is atomic but crypto_acomp_decompress() is not.
* 2. The pointer is not in the direct map, so it cannot be used by
* sg_init_one().
*/

Quoted 1 line

Whether you take it or not, feel free to add:

I prefer to retain my version as it focuses more on the explanation of why something occurs :-)

Quoted 2 lines

Thanks!

maintainer Reviewed-by on v2 1/1
#3 lore raw
In reply to Barry Song
Quoted 82 lines · Barry Song

From: Barry Song <[email protected]>

sg_init_one() relies on linearly mapped low memory for the safe utilization of virt_to_page(). Otherwise, we trigger a kernel BUG,

kernel BUG at include/linux/scatterlist.h:187!

Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 2997 Comm: syz-executor198 Not tainted 6.8.0-syzkaller #0
Hardware name: ARM-Versatile Express
PC is at sg_set_buf include/linux/scatterlist.h:187 [inline]
PC is at sg_init_one+0x9c/0xa8 lib/scatterlist.c:143
LR is at sg_init_table+0x2c/0x40 lib/scatterlist.c:128
Backtrace:
[<807e16ac>] (sg_init_one) from [<804c1824>] (zswap_decompress+0xbc/0x208 mm/zswap.c:1089)
 r7:83471c80 r6:def6d08c r5:844847d0 r4:ff7e7ef4
[<804c1768>] (zswap_decompress) from [<804c4468>] (zswap_load+0x15c/0x198 mm/zswap.c:1637)
 r9:8446eb80 r8:8446eb80 r7:8446eb84 r6:def6d08c r5:00000001 r4:844847d0
[<804c430c>] (zswap_load) from [<804b9644>] (swap_read_folio+0xa8/0x498 mm/page_io.c:518)
 r9:844ac800 r8:835e6c00 r7:00000000 r6:df955d4c r5:00000001 r4:def6d08c
[<804b959c>] (swap_read_folio) from [<804bb064>] (swap_cluster_readahead+0x1c4/0x34c mm/swap_state.c:684)
 r10:00000000 r9:00000007 r8:df955d4b r7:00000000 r6:00000000 r5:00100cca
 r4:00000001
[<804baea0>] (swap_cluster_readahead) from [<804bb3b8>] (swapin_readahead+0x68/0x4a8 mm/swap_state.c:904)
 r10:df955eb8 r9:00000000 r8:00100cca r7:84476480 r6:00000001 r5:00000000
 r4:00000001
[<804bb350>] (swapin_readahead) from [<8047cde0>] (do_swap_page+0x200/0xcc4 mm/memory.c:4046)
 r10:00000040 r9:00000000 r8:844ac800 r7:84476480 r6:00000001 r5:00000000
 r4:df955eb8

[<8047cbe0>] (do_swap_page) from [<8047e6c4>] (handle_pte_fault mm/memory.c:5301 [inline]) [<8047cbe0>] (do_swap_page) from [<8047e6c4>] (__handle_mm_fault mm/memory.c:5439 [inline]) [<8047cbe0>] (do_swap_page) from [<8047e6c4>] (handle_mm_fault+0x3d8/0x12b8 mm/memory.c:5604)
r10:00000040 r9:842b3900 r8:7eb0d000 r7:84476480 r6:7eb0d000 r5:835e6c00
r4:00000254
[<8047e2ec>] (handle_mm_fault) from [<80215d28>] (do_page_fault+0x148/0x3a8 arch/arm/mm/fault.c:326)
r10:00000007 r9:842b3900 r8:7eb0d000 r7:00000207 r6:00000254 r5:7eb0d9b4
r4:df955fb0
[<80215be0>] (do_page_fault) from [<80216170>] (do_DataAbort+0x38/0xa8 arch/arm/mm/fault.c:558)
r10:7eb0da7c r9:00000000 r8:80215be0 r7:df955fb0 r6:7eb0d9b4 r5:00000207
r4:8261d0e0
[<80216138>] (do_DataAbort) from [<80200e3c>] (__dabt_usr+0x5c/0x60 arch/arm/kernel/entry-armv.S:427)

Exception stack(0xdf955fb0 to 0xdf955ff8)

5fa0: 00000000 00000000 22d5f800 0008d158
5fc0: 00000000 7eb0d9a4 00000000 00000109 00000000 00000000 7eb0da7c 7eb0da3c 5fe0: 00000000 7eb0d9a0 00000001 00066bd4 00000010 ffffffff
r8:824a9044 r7:835e6c00 r6:ffffffff r5:00000010 r4:00066bd4

Code: 1a000004 e1822003 e8860094 e89da8f0 (e7f001f2)
---[ end trace 0000000000000000 ]---
----------------
Code disassembly (best guess):
   0:   1a000004        bne     0x18
   4:   e1822003        orr     r2, r2, r3
   8:   e8860094        stm     r6, {r2, r4, r7}
   c:   e89da8f0        ldm     sp, {r4, r5, r6, r7, fp, sp, pc}

* 10: e7f001f2 udf #18 <-- trapping instruction

Consequently, we have two choices: either employ kmap_to_page() alongside sg_set_page(), or resort to copying high memory contents to a temporary buffer residing in low memory. However, considering the introduction of the WARN_ON_ONCE in commit ef6e06b2ef870 ("highmem: fix kmap_to_page() for kmap_local_page() addresses"), which specifically addresses high memory concerns, it appears that memcpy remains the sole viable option.

Reported-and-tested-by [email protected]
Fixes 270700dd06ca ("mm/zswap: remove the memcpy if acomp is not sleepable")

---
-v2:
add comments according to Yosry

 mm/zswap.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)
mm/zswap.c +0 -0
index 9dec853647c8..dbd9f745fa8f 100644

mm/zswap.c static void zswap_decompress(struct zswap_entry *entry, struct page *page) · line 1087

Quoted 9 lines
mm/zswap.c +5 -1
@@ -1080,7 +1080,17 @@ static void zswap_decompress(struct zswap_entry *entry, struct page *page)
        mutex_lock(&acomp_ctx->mutex);
 
        src = zpool_map_handle(zpool, entry->handle, ZPOOL_MM_RO);
-       if (acomp_ctx->is_sleepable && !zpool_can_sleep_mapped(zpool)) {
+       /*
+        * If zpool_map_handle is atomic, we cannot reliably utilize its mapped buffer
+        * to do crypto_acomp_decompress() which might sleep. In such cases, we must
+        * resort to copying the buffer to a temporary one.
+        * Meanwhile, zpool_map_handle() might return a non-linearly mapped buffer,

nit: /s/Meanwhile/In addition

Very insignificant though - please disregard unless you submit a new version :)

mm/zswap.c static void zswap_decompress(struct zswap_entry *entry, struct page *page) · line 1091

Quoted 4 lines
mm/zswap.c +4 -0
+        * such as a kmap address of high memory or even ever a vmap address.
+        * However, sg_init_one is only equipped to handle linearly mapped low memory.
+        * In such cases, we also must copy the buffer to a temporary and lowmem one.
+        */

I like this extensive comment - this will be useful for beginners who are not familiar with the underlying machinery (read: me).

mm/zswap.c static void zswap_decompress(struct zswap_entry *entry, struct page *page) · line 1093

Quoted 2 lines
mm/zswap.c +2 -0
+       if ((acomp_ctx->is_sleepable && !zpool_can_sleep_mapped(zpool)) ||
+           !virt_addr_valid(src)) {

Nice! You and Yosry beat me to it - I was staring at the same piece of zsmalloc code.

It's somewhat serendipitous (albeit anti-climatic) when the fix is simply checking for the BUG_ON condition. Thanks for the fix and the detailed explanation, Barry!

maintainer Acked-by on v2 1/1
#4 lore raw
In reply to Barry Song
Quoted 65 lines · Barry Song

From: Barry Song <[email protected]>

sg_init_one() relies on linearly mapped low memory for the safe utilization of virt_to_page(). Otherwise, we trigger a kernel BUG,

kernel BUG at include/linux/scatterlist.h:187!

Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 2997 Comm: syz-executor198 Not tainted 6.8.0-syzkaller #0
Hardware name: ARM-Versatile Express
PC is at sg_set_buf include/linux/scatterlist.h:187 [inline]
PC is at sg_init_one+0x9c/0xa8 lib/scatterlist.c:143
LR is at sg_init_table+0x2c/0x40 lib/scatterlist.c:128
Backtrace: 
[<807e16ac>] (sg_init_one) from [<804c1824>] (zswap_decompress+0xbc/0x208 mm/zswap.c:1089)
 r7:83471c80 r6:def6d08c r5:844847d0 r4:ff7e7ef4
[<804c1768>] (zswap_decompress) from [<804c4468>] (zswap_load+0x15c/0x198 mm/zswap.c:1637)
 r9:8446eb80 r8:8446eb80 r7:8446eb84 r6:def6d08c r5:00000001 r4:844847d0
[<804c430c>] (zswap_load) from [<804b9644>] (swap_read_folio+0xa8/0x498 mm/page_io.c:518)
 r9:844ac800 r8:835e6c00 r7:00000000 r6:df955d4c r5:00000001 r4:def6d08c
[<804b959c>] (swap_read_folio) from [<804bb064>] (swap_cluster_readahead+0x1c4/0x34c mm/swap_state.c:684)
 r10:00000000 r9:00000007 r8:df955d4b r7:00000000 r6:00000000 r5:00100cca
 r4:00000001
[<804baea0>] (swap_cluster_readahead) from [<804bb3b8>] (swapin_readahead+0x68/0x4a8 mm/swap_state.c:904)
 r10:df955eb8 r9:00000000 r8:00100cca r7:84476480 r6:00000001 r5:00000000
 r4:00000001
[<804bb350>] (swapin_readahead) from [<8047cde0>] (do_swap_page+0x200/0xcc4 mm/memory.c:4046)
 r10:00000040 r9:00000000 r8:844ac800 r7:84476480 r6:00000001 r5:00000000
 r4:df955eb8

[<8047cbe0>] (do_swap_page) from [<8047e6c4>] (handle_pte_fault mm/memory.c:5301 [inline]) [<8047cbe0>] (do_swap_page) from [<8047e6c4>] (__handle_mm_fault mm/memory.c:5439 [inline]) [<8047cbe0>] (do_swap_page) from [<8047e6c4>] (handle_mm_fault+0x3d8/0x12b8 mm/memory.c:5604)
r10:00000040 r9:842b3900 r8:7eb0d000 r7:84476480 r6:7eb0d000 r5:835e6c00
r4:00000254
[<8047e2ec>] (handle_mm_fault) from [<80215d28>] (do_page_fault+0x148/0x3a8 arch/arm/mm/fault.c:326)
r10:00000007 r9:842b3900 r8:7eb0d000 r7:00000207 r6:00000254 r5:7eb0d9b4
r4:df955fb0
[<80215be0>] (do_page_fault) from [<80216170>] (do_DataAbort+0x38/0xa8 arch/arm/mm/fault.c:558)
r10:7eb0da7c r9:00000000 r8:80215be0 r7:df955fb0 r6:7eb0d9b4 r5:00000207
r4:8261d0e0
[<80216138>] (do_DataAbort) from [<80200e3c>] (__dabt_usr+0x5c/0x60 arch/arm/kernel/entry-armv.S:427)

Exception stack(0xdf955fb0 to 0xdf955ff8)

5fa0: 00000000 00000000 22d5f800 0008d158
5fc0: 00000000 7eb0d9a4 00000000 00000109 00000000 00000000 7eb0da7c 7eb0da3c 5fe0: 00000000 7eb0d9a0 00000001 00066bd4 00000010 ffffffff
r8:824a9044 r7:835e6c00 r6:ffffffff r5:00000010 r4:00066bd4

Code: 1a000004 e1822003 e8860094 e89da8f0 (e7f001f2) 
---[ end trace 0000000000000000 ]---
----------------
Code disassembly (best guess):
   0:	1a000004 	bne	0x18
   4:	e1822003 	orr	r2, r2, r3
   8:	e8860094 	stm	r6, {r2, r4, r7}
   c:	e89da8f0 	ldm	sp, {r4, r5, r6, r7, fp, sp, pc}
* 10:	e7f001f2 	udf	#18 <-- trapping instruction

Consequently, we have two choices: either employ kmap_to_page() alongside sg_set_page(), or resort to copying high memory contents to a temporary buffer residing in low memory. However, considering the introduction of the WARN_ON_ONCE in commit ef6e06b2ef870 ("highmem: fix kmap_to_page() for kmap_local_page() addresses"), which specifically addresses high memory concerns, it appears that memcpy remains the sole viable option.

Quoted 4 lines
Reported-and-tested-by [email protected]
Fixes 270700dd06ca ("mm/zswap: remove the memcpy if acomp is not sleepable")

Making highmem more efficient isn't much of a priority, but I would still be curious to hear Ira's thought on that WARN_ON_ONCE().