Support IGT in display driver
Subsystems (3)
v6 cover Support IGT in display driver
From: Hsiao Chien Sung <[email protected]>
This series is based on [email protected].
This series adds support for running IGT (Intel GPU Tool) tests with MediaTek display driver. The following changes will be applied:
1. Add a new API for creating GCE thread loop to retrieve CRCs from the hardware component
2. Support hardware CRC calculation in both VDOSYS0 and VDOSYS1
3. Support alpha blending in both VDOSYS0 and VDOSYS1
Changes in v6:
- Use drm_vblank_work to deffer the CRC work into bottom halves
- Separate the patches for "Premultiplied" and "None" alpha blending
Changes in v5:
- Add more descriptions to the codes
- Add DRM mode configs to the driver data
- Squash and rearrange the commits
Changes in v4:
- Separate the patch into smaller ones
- Change the title of some patches
- Revert the changes that are not related to the series
Changes in v3:
- Modify the dt-binding document of Mediatek OVL
- Set DRM mode configs accroding to the hardware capabilities
- Replace cmdq_pkt_jump_absolute() with cmdq_pkt_jump()
Changes in v2:
- Simplify CMDQ by adding commands that are currently used only
- Integrate CRC related codes into new APIs for Mixer and OVL to reuse
- Add CPU version CRC retrieval when CMDQ is disabled
Hsiao Chien Sung (14):
soc: mediatek: Disable 9-bit alpha in ETHDR drm/mediatek: Add OVL compatible name for MT8195 drm/mediatek: Add missing plane settings when async update drm/mediatek: Add DRM_MODE_ROTATE_0 to rotation property drm/mediatek: Set DRM mode configs accordingly drm/mediatek: Turn off the layers with zero width or height drm/mediatek: Support alpha blending in display driver drm/mediatek: Support "Pre-multiplied" alpha blending in OVL drm/mediatek: Support "Pre-multiplied" alpha blending in Mixer drm/mediatek: Support "None" alpha blending in OVL drm/mediatek: Support "None" alpha blending in Mixer drm/mediatek: Support CRC in display driver drm/mediatek: Support CRC in OVL
drm/mediatek: Support CRC in OVL adaptor
drivers/gpu/drm/mediatek/mtk_crtc.c | 260 +++++++++++++++ drivers/gpu/drm/mediatek/mtk_crtc.h | 38 +++ drivers/gpu/drm/mediatek/mtk_ddp_comp.c | 6 + drivers/gpu/drm/mediatek/mtk_ddp_comp.h | 9 +- drivers/gpu/drm/mediatek/mtk_disp_drv.h | 6 + drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 304 ++++++++++++++++-- .../gpu/drm/mediatek/mtk_disp_ovl_adaptor.c | 23 +- drivers/gpu/drm/mediatek/mtk_drm_drv.c | 24 ++ drivers/gpu/drm/mediatek/mtk_drm_drv.h | 3 + drivers/gpu/drm/mediatek/mtk_ethdr.c | 94 +++++- drivers/gpu/drm/mediatek/mtk_ethdr.h | 5 + drivers/gpu/drm/mediatek/mtk_plane.c | 15 +- drivers/soc/mediatek/mtk-mmsys.c | 1 + 13 files changed, 744 insertions(+), 44 deletions(-)
--
2.18.0
PATCH v6 1/14 soc: mediatek: Disable 9-bit alpha in ETHDR
From: Hsiao Chien Sung <[email protected]>
ETHDR 9-bit alpha should be disabled by default,
otherwise alpha blending will not work.
--- drivers/soc/mediatek/mtk-mmsys.c | 1 + 1 file changed, 1 insertion(+)
drivers/soc/mediatek/mtk-mmsys.c +1 -0
@@ -236,6 +236,7 @@ void mtk_mmsys_mixer_in_config(struct device *dev, int idx, bool alpha_sel, u16mtk_mmsys_update_bits (mmsys,MT8195_VDO1_MIXER_IN1_ALPHA + (idx -1 ) *4 , ~0 , alpha <<16 | alpha, cmdq_pkt); +mtk_mmsys_update_bits (mmsys,MT8195_VDO1_HDR_TOP_CFG ,BIT (15 + idx),0 , cmdq_pkt);mtk_mmsys_update_bits (mmsys,MT8195_VDO1_HDR_TOP_CFG ,BIT (19 + idx), alpha_sel << (19 + idx), cmdq_pkt); mtk_mmsys_update_bits(mmsys, MT8195_VDO1_MIXER_IN1_PAD + (idx - 1) * 4,
Signature · 1 line
2.18.0
PATCH v6 2/14 drm/mediatek: Add OVL compatible name for MT8195
In reply to Shawn SungFrom: Hsiao Chien Sung <[email protected]>
Add OVL compatible name for MT8195.
Without this commit, DRM won't work after modifying the device tree.
--- drivers/gpu/drm/mediatek/mtk_drm_drv.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/gpu/drm/mediatek/mtk_drm_drv.c +2 -0
@@ -761,6 +761,8 @@ static const struct of_device_id mtk_ddp_comp_dt_ids[] = { .data = (void *)MTK_DISP_OVL }, { .compatible = "mediatek,mt8192-disp-ovl", .data = (void *)MTK_DISP_OVL }, + { .compatible = "mediatek,mt8195-disp-ovl", + .data = (void *)MTK_DISP_OVL }, { .compatible = "mediatek,mt8183-disp-ovl-2l", .data = (void *)MTK_DISP_OVL_2L }, { .compatible = "mediatek,mt8192-disp-ovl-2l",
Signature · 1 line
2.18.0
PATCH v6 3/14 drm/mediatek: Add missing plane settings when async update
In reply to Shawn SungFrom: Hsiao Chien Sung <[email protected]>
Fix an issue that plane coordinate was not saved when calling async update.
--- drivers/gpu/drm/mediatek/mtk_plane.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/gpu/drm/mediatek/mtk_plane.c +2 -0
@@ -227,6 +227,8 @@ static void mtk_plane_atomic_async_update(struct drm_plane *plane, plane->state->src_y = new_state->src_y; plane->state->src_h = new_state->src_h; plane->state->src_w = new_state->src_w; + plane->state->dst.x1 = new_state->dst.x1; + plane->state->dst.y1 = new_state->dst.y1;mtk_plane_update_new_state (new_state, new_plane_state);swap (plane->state->fb, new_state->fb);
Signature · 1 line
2.18.0
PATCH v6 4/14 drm/mediatek: Add DRM_MODE_ROTATE_0 to rotation property
In reply to Shawn SungFrom: Hsiao Chien Sung <[email protected]>
Always add DRM_MODE_ROTATE_0 to rotation property to meet IGT's (Intel GPU Tools) requirement.
--- drivers/gpu/drm/mediatek/mtk_ddp_comp.h | 6 +++++- drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 21 +++++++++------------ drivers/gpu/drm/mediatek/mtk_plane.c | 2 +- 3 files changed, 15 insertions(+), 14 deletions(-)
drivers/gpu/drm/mediatek/mtk_ddp_comp.h +5 -1
@@ -192,7 +192,11 @@ unsigned int mtk_ddp_comp_supported_rotations(struct mtk_ddp_comp *comp)if (comp->funcs && comp->funcs->supported_rotations)return comp->funcs->supported_rotations (comp->dev); -return 0 ; +/* +* In order to pass IGT tests, DRM_MODE_ROTATE_0 is required when +* rotation is not supported. +*/ +return DRM_MODE_ROTATE_0 ; }static inline unsigned int mtk_ddp_comp_layer_nr (struct mtk_ddp_comp *comp)
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +9 -12
@@ -288,6 +288,10 @@ unsigned int mtk_ovl_layer_nr(struct device *dev)unsigned int mtk_ovl_supported_rotations (struct device *dev) { +/* +* although currently OVL can only do reflection, +* reflect x + reflect y = rotate 180 +*/ return DRM_MODE_ROTATE_0 |DRM_MODE_ROTATE_180 |DRM_MODE_REFLECT_X |DRM_MODE_REFLECT_Y ; }
@@ -296,27 +300,20 @@ int mtk_ovl_layer_check(struct device *dev, unsigned int idx, struct mtk_plane_state *mtk_state) {struct drm_plane_state *state = &mtk_state->base; -unsigned int rotation =0 ; - rotation =drm_rotation_simplify (state->rotation, -DRM_MODE_ROTATE_0 | -DRM_MODE_REFLECT_X | -DRM_MODE_REFLECT_Y ); - rotation &= ~DRM_MODE_ROTATE_0 ; - -/* We can only do reflection, not rotation */ -if ((rotation &DRM_MODE_ROTATE_MASK ) !=0 ) +/* check if any unsupported rotation is set */ +if (state->rotation & ~mtk_ovl_supported_rotations (dev))return -EINVAL ;/* * TODO: Rotating/reflecting YUV buffers is not supported at this time. * Only RGB[AX] variants are supported. +* Since DRM_MODE_ROTATE_0 means "no rotation", we should not +* reject layers with this property. */ -if (state->fb->format->is_yuv && rotation !=0 ) +if (state->fb->format->is_yuv && (state->rotation & ~DRM_MODE_ROTATE_0 ))return -EINVAL ; - state->rotation = rotation; -return 0 ; }
drivers/gpu/drm/mediatek/mtk_plane.c +1 -1
@@ -338,7 +338,7 @@ int mtk_plane_init(struct drm_device *dev, struct drm_plane *plane,return err; } -if (supported_rotations & ~DRM_MODE_ROTATE_0 ) { +if (supported_rotations) { err =drm_plane_create_rotation_property (plane,DRM_MODE_ROTATE_0 , supported_rotations);
Signature · 1 line
2.18.0
Re: [PATCH v6 04/14] drm/mediatek: Add DRM_MODE_ROTATE_0 to rotation property
Hi, Shawn:
Quoted 4 lines · Shawn Sung
From: Hsiao Chien Sung <[email protected]>
Always add
DRM_MODE_ROTATE_0to rotation property to meet IGT's (Intel GPU Tools) requirement.
Quoted 102 lines
Reviewed-by: AngeloGioacchino Del Regno <
[email protected]>Signed-off-by Hsiao Chien Sung <[email protected]>--- drivers/gpu/drm/mediatek/mtk_ddp_comp.h | 6 +++++- drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 21 +++++++++------------ drivers/gpu/drm/mediatek/mtk_plane.c | 2 +- 3 files changed, 15 insertions(+), 14 deletions(-)drivers/gpu/drm/mediatek/mtk_ddp_comp.h +2
-1@@ -192,7 +192,11 @@ unsigned int mtk_ddp_comp_supported_rotations(struct mtk_ddp_comp *comp) if (comp->funcs && comp->funcs->supported_rotations) return comp->funcs->supported_rotations(comp->dev); -return 0 ; +/* +* In order to pass IGT tests, DRM_MODE_ROTATE_0 is required when
drivers/gpu/drm/mediatek/mtk_ddp_comp.h +3
-0+* rotation is not supported. +*/ +return DRM_MODE_ROTATE_0 ; } static inline unsigned int mtk_ddp_comp_layer_nr(struct mtk_ddp_comp*comp)
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +4
-0@@ -288,6 +288,10 @@ unsigned int mtk_ovl_layer_nr(struct device *dev)unsigned int mtk_ovl_supported_rotations (struct device *dev) { +/* +* although currently OVL can only do reflection, +* reflect x + reflect y = rotate 180 +*/ return DRM_MODE_ROTATE_0 |DRM_MODE_ROTATE_180 |DRM_MODE_REFLECT_X |DRM_MODE_REFLECT_Y ;}
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +2
-9@@ -296,27 +300,20 @@ int mtk_ovl_layer_check(struct device *dev,unsigned int idx, struct mtk_plane_state *mtk_state) { struct drm_plane_state *state = &mtk_state->base; -unsigned int rotation =0 ; - rotation =drm_rotation_simplify (state->rotation, -DRM_MODE_ROTATE_0 | -DRM_MODE_REFLECT_X | -DRM_MODE_REFLECT_Y ); - rotation &= ~DRM_MODE_ROTATE_0 ; - -/* We can only do reflection, not rotation */ -if ((rotation &DRM_MODE_ROTATE_MASK ) !=0 ) +/* check if any unsupported rotation is set */ +if (state->rotation & ~mtk_ovl_supported_rotations (dev))return -EINVAL ;/* * TODO: Rotating/reflecting YUV buffers is not supported at this time.
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +1
-0* Only RGB[AX] variants are supported. +* Since DRM_MODE_ROTATE_0 means "no rotation", we should not
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +2
-1+* reject layers with this property. */ -if (state->fb->format->is_yuv && rotation !=0 ) + if (state->fb->format->is_yuv && (state->rotation &~DRM_MODE_ROTATE_0))
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +0
-2return -EINVAL ; - state->rotation = rotation; -return 0 ; }drivers/gpu/drm/mediatek/mtk_plane.c +1
-1@@ -338,7 +338,7 @@ int mtk_plane_init(struct drm_device *dev, structdrm_plane *plane, return err; } -if (supported_rotations & ~DRM_MODE_ROTATE_0 ) { +if (supported_rotations) { err =drm_plane_create_rotation_property (plane, DRM_MODE_ROTAT
E_0,
supported_rota
tions);
CK Hu (胡俊光)
Reviewed-byRe: [PATCH v6 04/14] drm/mediatek: Add DRM_MODE_ROTATE_0 to rotation property
Hi, Shawn:
Quoted 50 lines · CK Hu
Hi, Shawn:
Quoted 4 lines · Shawn Sung
From: Hsiao Chien Sung <[email protected]>
Always add
DRM_MODE_ROTATE_0to rotation property to meet IGT's (Intel GPU Tools) requirement.Reviewed-by CK Hu <[email protected]>Quoted 40 lines
Reviewed-by: AngeloGioacchino Del Regno <
[email protected]>Signed-off-by Hsiao Chien Sung <[email protected]>--- drivers/gpu/drm/mediatek/mtk_ddp_comp.h | 6 +++++- drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 21 +++++++++------------ drivers/gpu/drm/mediatek/mtk_plane.c | 2 +- 3 files changed, 15 insertions(+), 14 deletions(-)drivers/gpu/drm/mediatek/mtk_ddp_comp.h +2
-1@@ -192,7 +192,11 @@ unsigned int mtk_ddp_comp_supported_rotations(struct mtk_ddp_comp *comp) if (comp->funcs && comp->funcs->supported_rotations) return comp->funcs->supported_rotations(comp->dev); -return 0 ; +/* +* In order to pass IGT tests, DRM_MODE_ROTATE_0 is required when
drivers/gpu/drm/mediatek/mtk_ddp_comp.h +3
-0+* rotation is not supported. +*/ +return DRM_MODE_ROTATE_0 ; } static inline unsigned int mtk_ddp_comp_layer_nr(struct
mtk_ddp_comp
*comp)drivers/gpu/drm/mediatek/mtk_disp_ovl.c +0
-0@@ -288,6 +288,10 @@ unsigned int mtk_ovl_layer_nr(struct device *dev)
Quoted 6 lines
drivers/gpu/drm/mediatek/mtk_disp_ovl.c unsigned int mtk_ovl_layer_nr(struct device *dev) · line 294
Quoted 6 lines
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +4
-0unsigned int mtk_ovl_supported_rotations (struct device *dev) { +/* +* although currently OVL can only do reflection, +* reflect x + reflect y = rotate 180 +*/
Sorry, this comment is not related to DRM_MODE_ROTATE_0, so after removing this comment,
Quoted 58 lines
Quoted 58 lines
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +0
-0return DRM_MODE_ROTATE_0 |DRM_MODE_ROTATE_180 |DRM_MODE_REFLECT_X |DRM_MODE_REFLECT_Y ;}
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +2
-9@@ -296,27 +300,20 @@ int mtk_ovl_layer_check(struct device *dev,unsigned int idx, struct mtk_plane_state *mtk_state) { struct drm_plane_state *state = &mtk_state->base; -unsigned int rotation =0 ; - rotation =drm_rotation_simplify (state->rotation, -DRM_MODE_ROTATE_0 | -DRM_MODE_REFLECT_X | -DRM_MODE_REFLECT_Y ); - rotation &= ~DRM_MODE_ROTATE_0 ; - -/* We can only do reflection, not rotation */ -if ((rotation &DRM_MODE_ROTATE_MASK ) !=0 ) +/* check if any unsupported rotation is set */ +if (state->rotation & ~mtk_ovl_supported_rotations (dev))return -EINVAL ;/* * TODO: Rotating/reflecting YUV buffers is not supported at this time.
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +1
-0* Only RGB[AX] variants are supported. +* Since DRM_MODE_ROTATE_0 means "no rotation", we should not
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +2
-1+* reject layers with this property. */ -if (state->fb->format->is_yuv && rotation !=0 ) + if (state->fb->format->is_yuv && (state->rotation &~DRM_MODE_ROTATE_0))
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +0
-2return -EINVAL ; - state->rotation = rotation; -return 0 ; }drivers/gpu/drm/mediatek/mtk_plane.c +0
-0@@ -338,7 +338,7 @@ int mtk_plane_init(struct drm_device *dev,struct
drm_plane*plane,drivers/gpu/drm/mediatek/mtk_plane.c +1
-1return err; } -if (supported_rotations & ~DRM_MODE_ROTATE_0 ) { +if (supported_rotations) { err =drm_plane_create_rotation_property (plane, DRM_MODE_ROTAT
E_0,
supported_rota
tions);
Re: [PATCH v6 04/14] drm/mediatek: Add DRM_MODE_ROTATE_0 to rotation property
Hi CK,
Quoted 19 lines · CK Hu (胡俊光)
Quoted 9 lines
Quoted 9 lines
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +0
-0@@ -288,6 +288,10 @@ unsigned int mtk_ovl_layer_nr(struct device *dev)Quoted 6 lines
drivers/gpu/drm/mediatek/mtk_disp_ovl.c unsigned int mtk_ovl_layer_nr(struct device *dev) · line 294
Quoted 6 lines
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +4
-0unsigned int mtk_ovl_supported_rotations (struct device *dev) { +/* +* although currently OVL can only do reflection, +* reflect x + reflect y = rotate 180 +*/ Sorry, this comment is not related to
DRM_MODE_ROTATE_0, so after removing this comment,
Quoted 2 lines
Reviewed-by CK Hu <[email protected]>
Got it. No problem. Will remove it from this series.
Thanks,
Shawn
PATCH v6 5/14 drm/mediatek: Set DRM mode configs accordingly
In reply to Shawn SungFrom: Hsiao Chien Sung <[email protected]>
Set DRM mode configs limitation according to the hardware capabilities and pass the IGT checks as below:
- The test "graphics.IgtKms.kms_plane" requires a frame buffer with width of 4512 pixels (> 4096).
- The test "graphics.IgtKms.kms_cursor_crc" checks if the cursor size is defined, and run the test with cursor size from 1x1 to 512x512.
Please notice that the test conditions may change as IGT is updated.
--- drivers/gpu/drm/mediatek/mtk_drm_drv.c | 22 ++++++++++++++++++++++ drivers/gpu/drm/mediatek/mtk_drm_drv.h | 3 +++ 2 files changed, 25 insertions(+)
drivers/gpu/drm/mediatek/mtk_drm_drv.c +22 -0
@@ -296,6 +296,9 @@ static const struct mtk_mmsys_driver_data mt8188_vdosys0_driver_data = { .conn_routes = mt8188_mtk_ddp_main_routes, .num_conn_routes = ARRAY_SIZE(mt8188_mtk_ddp_main_routes), .mmsys_dev_num = 2, + .max_width = 8191, + .min_width = 1, + .min_height = 1, };static const struct mtk_mmsys_driver_data mt8192_mmsys_driver_data = {
@@ -310,6 +313,9 @@ static const struct mtk_mmsys_driver_data mt8195_vdosys0_driver_data = { .main_path = mt8195_mtk_ddp_main, .main_len = ARRAY_SIZE(mt8195_mtk_ddp_main), .mmsys_dev_num = 2, + .max_width = 8191, + .min_width = 1, + .min_height = 1, };static const struct mtk_mmsys_driver_data mt8195_vdosys1_driver_data = {
@@ -317,6 +323,9 @@ static const struct mtk_mmsys_driver_data mt8195_vdosys1_driver_data = { .ext_len = ARRAY_SIZE(mt8195_mtk_ddp_ext), .mmsys_id = 1, .mmsys_dev_num = 2, + .max_width = 8191, + .min_width = 2, /* 2-pixel align when ethdr is bypassed */ + .min_height = 1, };static const struct of_device_id mtk_drm_of_ids[] = {
@@ -495,6 +504,15 @@ static int mtk_drm_kms_init(struct drm_device *drm)for (j =0 ; j < private->data->mmsys_dev_num; j++) { priv_n = private->all_drm_private[j]; +if (priv_n->data->max_width) + drm->mode_config.max_width = priv_n->data->max_width; + +if (priv_n->data->min_width) + drm->mode_config.min_width = priv_n->data->min_width; + +if (priv_n->data->min_height) + drm->mode_config.min_height = priv_n->data->min_height; +if (i ==CRTC_MAIN && priv_n->data->main_len) { ret = mtk_crtc_create(drm, priv_n->data->main_path, priv_n->data->main_len, j,
@@ -522,6 +540,10 @@ static int mtk_drm_kms_init(struct drm_device *drm) } } +/* IGT will check if the cursor size is configured */ + drm->mode_config.cursor_width = drm->mode_config.max_width; + drm->mode_config.cursor_height = drm->mode_config.max_height; +/* Use OVL device for all DMA memory allocations */ crtc =drm_crtc_from_index (drm,0 );if (crtc)
drivers/gpu/drm/mediatek/mtk_drm_drv.h +3 -0
@@ -46,6 +46,9 @@ struct mtk_mmsys_driver_data {bool shadow_register;unsigned int mmsys_id;unsigned int mmsys_dev_num; + +int max_width; +int min_width, min_height; };struct mtk_drm_private {
Signature · 1 line
2.18.0
Re: [PATCH v6 05/14] drm/mediatek: Set DRM mode configs accordingly
Hi, Hsiao-chien:
Quoted 61 lines · Shawn Sung
From: Hsiao Chien Sung <[email protected]>
Set DRM mode configs limitation according to the hardware capabilities
and pass the IGT checks as below:- The test "graphics.IgtKms.kms_plane" requires a frame buffer with width of 4512 pixels (> 4096).
- The test "graphics.IgtKms.kms_cursor_crc" checks if the cursor size is
defined, and run the test with cursor size from 1x1 to 512x512.Please notice that the test conditions may change as IGT is updated.
Signed-off-by Hsiao Chien Sung <[email protected]>--- drivers/gpu/drm/mediatek/mtk_drm_drv.c | 22 ++++++++++++++++++++++ drivers/gpu/drm/mediatek/mtk_drm_drv.h | 3 +++ 2 files changed, 25 insertions(+)drivers/gpu/drm/mediatek/mtk_drm_drv.c +3
-0@@ -296,6 +296,9 @@ static const struct mtk_mmsys_driver_data mt8188_vdosys0_driver_data = { .conn_routes = mt8188_mtk_ddp_main_routes, .num_conn_routes = ARRAY_SIZE(mt8188_mtk_ddp_main_routes), .mmsys_dev_num = 2, + .max_width = 8191, + .min_width = 1, + .min_height = 1, };static const struct
mtk_mmsys_driver_datamt8192_mmsys_driver_data=
{drivers/gpu/drm/mediatek/mtk_drm_drv.c +3
-0@@ -310,6 +313,9 @@ static const struct mtk_mmsys_driver_data mt8195_vdosys0_driver_data = { .main_path = mt8195_mtk_ddp_main, .main_len = ARRAY_SIZE(mt8195_mtk_ddp_main), .mmsys_dev_num = 2, + .max_width = 8191, + .min_width = 1, + .min_height = 1, };static const struct
mtk_mmsys_driver_datamt8195_vdosys1_driver_data
= {drivers/gpu/drm/mediatek/mtk_drm_drv.c +3
-0@@ -317,6 +323,9 @@ static const struct mtk_mmsys_driver_data mt8195_vdosys1_driver_data = { .ext_len = ARRAY_SIZE(mt8195_mtk_ddp_ext), .mmsys_id = 1, .mmsys_dev_num = 2, + .max_width = 8191, + .min_width = 2, /* 2-pixel align when ethdr is bypassed */ + .min_height = 1, };static const struct
of_device_idmtk_drm_of_ids[] = {
drivers/gpu/drm/mediatek/mtk_drm_drv.c static int mtk_drm_kms_init(struct drm_device · line 510
Quoted 7 lines
drivers/gpu/drm/mediatek/mtk_drm_drv.c +2
-0@@ -495,6 +504,15 @@ static int mtk_drm_kms_init(struct drm_device *drm)for (j =0 ; j < private->data->mmsys_dev_num; j++) { priv_n = private->all_drm_private[j]; +if (priv_n->data->max_width) + drm->mode_config.max_width = priv_n- >data->max_width;
Remove one extra space before '='.
Quoted 32 lines
drivers/gpu/drm/mediatek/mtk_drm_drv.c +6
-0+ +if (priv_n->data->min_width) + drm->mode_config.min_width = priv_n- >data->min_width; + +if (priv_n->data->min_height) + drm->mode_config.min_height = priv_n-Quoted 1 line
data->min_height;drivers/gpu/drm/mediatek/mtk_drm_drv.c +1
-0+if (i ==CRTC_MAIN && priv_n->data->main_len) { ret = mtk_crtc_create(drm, priv_n-Quoted 1 line
data->main_path,priv_n->data-
Quoted 1 line
main_len, j,drivers/gpu/drm/mediatek/mtk_drm_drv.c +4
-0@@ -522,6 +540,10 @@ static int mtk_drm_kms_init(struct drm_device *drm) } } +/* IGT will check if the cursor size is configured */ + drm->mode_config.cursor_width = drm->mode_config.max_width; + drm->mode_config.cursor_height = drm->mode_config.max_height; +/* Use OVL device for all DMA memory allocations */ crtc =drm_crtc_from_index (drm,0 );drivers/gpu/drm/mediatek/mtk_drm_drv.c +0
-0if (crtc)drivers/gpu/drm/mediatek/mtk_drm_drv.h +0
-0
drivers/gpu/drm/mediatek/mtk_drm_drv.h struct mtk_mmsys_driver_data { · line 51
Quoted 6 lines
drivers/gpu/drm/mediatek/mtk_drm_drv.h +3
-0@@ -46,6 +46,9 @@ struct mtk_mmsys_driver_data {bool shadow_register;unsigned int mmsys_id;unsigned int mmsys_dev_num; + +int max_width; +int min_width, min_height;
I would like to be different line:
int min_width;
int min_height;
Regards,
CK
Quoted 3 lines
drivers/gpu/drm/mediatek/mtk_drm_drv.h +0
-0};struct mtk_drm_private {
PATCH v6 6/14 drm/mediatek: Turn off the layers with zero width or height
In reply to Shawn SungFrom: Hsiao Chien Sung <[email protected]>
We found that IGT (Intel GPU Tool) will try to commit layers with zero width or height and lead to undefined behaviors in hardware. Disable the layers in such a situation.
--- drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c | 2 +- drivers/gpu/drm/mediatek/mtk_ethdr.c | 7 ++++++- 2 files changed, 7 insertions(+), 2 deletions(-)
drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c +1 -1
@@ -158,7 +158,7 @@ void mtk_ovl_adaptor_layer_config(struct device *dev, unsigned int idx, merge = ovl_adaptor->ovl_adaptor_comp[OVL_ADAPTOR_MERGE0 + idx]; ethdr = ovl_adaptor->ovl_adaptor_comp[OVL_ADAPTOR_ETHDR0 ]; -if (!pending->enable) { +if (!pending->enable || !pending->width || !pending->height) {mtk_merge_stop_cmdq (merge, cmdq_pkt);mtk_mdp_rdma_stop (rdma_l, cmdq_pkt);mtk_mdp_rdma_stop (rdma_r, cmdq_pkt);
drivers/gpu/drm/mediatek/mtk_ethdr.c +6 -1
@@ -160,7 +160,12 @@ void mtk_ethdr_layer_config(struct device *dev, unsigned int idx,if (idx >=4 )return ; -if (!pending->enable) { +if (!pending->enable || !pending->width || !pending->height) { +/* +* instead of disabling layer with MIX_SRC_CON directly +* set the size to 0 to avoid screen shift due to mixer +* mode switch (hardware behavior) +*/ mtk_ddp_write (cmdq_pkt,0 , &mixer->cmdq_base, mixer->regs,MIX_L_SRC_SIZE (idx));return ; }
--
2.18.0
PATCH v6 7/14 drm/mediatek: Support alpha blending in display driver
In reply to Shawn SungFrom: Hsiao Chien Sung <[email protected]>
Support "Pre-multiplied" and "None" blend mode on MediaTek's chips by adding correct blend mode property when the planes init. Before this patch, only the "Coverage" mode (default) is supported.
For more information, there are three pixel blend modes in DRM driver:
"None", "Pre-multiplied", and "Coverage".
To understand the difference between these modes, let's take a look at the following two approaches to do alpha blending:
1. Straight:
dst.RGB = src.RGB * src.A + dst.RGB * (1 - src.A)
This is straightforward and easy to understand, when the source layer is compositing with the destination layer, it's alpha will affect the result. This is also known as "post-multiplied", or "Coverage" mode.
2. Pre-multiplied:
dst.RGB = src.RGB + dst.RGB * (1 - src.A)
Since the source RGB have already multiplied its alpha, only destination RGB need to multiply it. This is the "Pre-multiplied" mode in DRM.
For the "None" blend mode in DRM, it means the pixel alpha is ignored when compositing the layers, only the constant alpha for the composited layer will take effects.
--- drivers/gpu/drm/mediatek/mtk_plane.c | 11 +++++++++++ 1 file changed, 11 insertions(+)
drivers/gpu/drm/mediatek/mtk_plane.c +11 -0
@@ -346,6 +346,17 @@ int mtk_plane_init(struct drm_device *dev, struct drm_plane *plane,DRM_INFO ("Create rotation property failed\n" ); } + err =drm_plane_create_alpha_property (plane); +if (err) +DRM_ERROR ("failed to create property: alpha\n" ); + + err =drm_plane_create_blend_mode_property (plane, +BIT (DRM_MODE_BLEND_PREMULTI ) | +BIT (DRM_MODE_BLEND_COVERAGE ) | +BIT (DRM_MODE_BLEND_PIXEL_NONE )); +if (err) +DRM_ERROR ("failed to create property: blend_mode\n" ); +drm_plane_helper_add (plane, &mtk_plane_helper_funcs);return 0 ;
Signature · 1 line
2.18.0
Re: [PATCH v6 07/14] drm/mediatek: Support alpha blending in display driver
Hi, Shawn:
Quoted 60 lines · Shawn Sung
From: Hsiao Chien Sung <[email protected]>
Support "Pre-multiplied" and "None" blend mode on MediaTek's chips by adding correct blend mode property when the planes init. Before this patch, only the "Coverage" mode (default) is supported.
For more information, there are three pixel blend modes in DRM driver:
"None", "Pre-multiplied", and "Coverage".To understand the difference between these modes, let's take a look at
the following two approaches to do alpha blending:1. Straight:
dst.RGB = src.RGB * src.A + dst.RGB * (1 - src.A)
This is straightforward and easy to understand, when the source layer is
compositing with the destination layer, it's alpha will affect the result. This is also known as "post-multiplied", or "Coverage" mode.2. Pre-multiplied:
dst.RGB = src.RGB + dst.RGB * (1 - src.A)
Since the source RGB have already multiplied its alpha, only destination
RGB need to multiply it. This is the "Pre-multiplied" mode in DRM.For the "None" blend mode in DRM, it means the pixel alpha is ignored when compositing the layers, only the constant alpha for the composited
layer will take effects.Reviewed-by: AngeloGioacchino Del Regno <
[email protected]>Reviewed-by CK Hu <[email protected]>Signed-off-by Hsiao Chien Sung <[email protected]>--- drivers/gpu/drm/mediatek/mtk_plane.c | 11 +++++++++++ 1 file changed, 11 insertions(+)drivers/gpu/drm/mediatek/mtk_plane.c +6
-0@@ -346,6 +346,17 @@ int mtk_plane_init(struct drm_device *dev, struct drm_plane *plane, DRM_INFO("Create rotation property failed\n"); } + err =drm_plane_create_alpha_property (plane); +if (err) +DRM_ERROR ("failed to create property: alpha\n" ); + + err = drm_plane_create_blend_mode_property(plane, + BIT(DRM_MODE_BLEND_PREMULTI) |
drivers/gpu/drm/mediatek/mtk_plane.c +1
-0+ BIT(DRM_MODE_BLEND_COVERAGE) |
drivers/gpu/drm/mediatek/mtk_plane.c +1
-0+ BIT(DRM_MODE_BLEND_P
Quoted 1 line
IXEL_NONE));
After all sub driver support these function, then create blend property. So move this patch after all sub driver support these blend mode.
Regards,
CK
Quoted 6 lines
drivers/gpu/drm/mediatek/mtk_plane.c +3
-0+if (err) +DRM_ERROR ("failed to create property: blend_mode\n" ); +drm_plane_helper_add (plane, &mtk_plane_helper_funcs);return 0 ;
Re: [PATCH v6 07/14] drm/mediatek: Support alpha blending in display driver
Hi CK,
Quoted 10 lines · CK Hu (胡俊光)
Quoted 10 lines
drivers/gpu/drm/mediatek/mtk_plane.c +0
-0@@ -346,6 +346,17 @@ int mtk_plane_init(struct drm_device *dev, struct drm_plane *plane, DRM_INFO("Create rotation property failed\n"); }
Quoted 16 lines
Quoted 11 lines
drivers/gpu/drm/mediatek/mtk_plane.c +6
-0+ err =drm_plane_create_alpha_property (plane); +if (err) +DRM_ERROR ("failed to create property: alpha\n" ); + + err = drm_plane_create_blend_mode_property(plane, + BIT(DRM_MODE_BLEND_PREMULTI) |
drivers/gpu/drm/mediatek/mtk_plane.c +1
-0+ BIT(DRM_MODE_BLEND_COVERAGE) |
drivers/gpu/drm/mediatek/mtk_plane.c +1
-0+ BIT(DRM_MODE_BLEND_P
IXEL_NONE));After all sub driver support these function, then create blend property. So move this patch after all sub driver support these blend mode.
Got it. Will rearrange the patches in the next version
Thanks,
Shawn
PATCH v6 8/14 drm/mediatek: Support "Pre-multiplied" alpha blending in OVL
In reply to Shawn SungFrom: Hsiao Chien Sung <[email protected]>
Support "Pre-multiplied" blend mode on MediaTek's chips. Before this patch, only the "coverage" mode is supported.
Please refer to the description of the commit "drm/mediatek: Support alpha blending in display driver" for more information.
--- drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 84 +++++++++++++++++++++---- 1 file changed, 73 insertions(+), 11 deletions(-)
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +73 -11
@@ -38,6 +38,7 @@#define DISP_REG_OVL_PITCH_MSB (n) (0x0040 + 0x20 * (n))#define OVL_PITCH_MSB_2ND_SUBBUF BIT(16)#define DISP_REG_OVL_PITCH (n) (0x0044 + 0x20 * (n)) +#define OVL_CONST_BLEND BIT(28)#define DISP_REG_OVL_RDMA_CTRL (n) (0x00c0 + 0x20 * (n))#define DISP_REG_OVL_RDMA_GMC (n) (0x00c8 + 0x20 * (n))#define DISP_REG_OVL_ADDR_MT2701 0x0040
@@ -51,13 +52,16 @@#define GMC_THRESHOLD_HIGH ((1 << GMC_THRESHOLD_BITS) / 4)#define GMC_THRESHOLD_LOW ((1 << GMC_THRESHOLD_BITS) / 8) +#define OVL_CON_CLRFMT_MAN BIT(23)#define OVL_CON_BYTE_SWAP BIT(24) -#define OVL_CON_MTX_YUV_TO_RGB (6 << 16) +#define OVL_CON_RGB_SWAP BIT(25)#define OVL_CON_CLRFMT_RGB (1 << 12)#define OVL_CON_CLRFMT_RGBA8888 (2 << 12)#define OVL_CON_CLRFMT_ARGB8888 (3 << 12)#define OVL_CON_CLRFMT_UYVY (4 << 12)#define OVL_CON_CLRFMT_YUYV (5 << 12) +#define OVL_CON_MTX_YUV_TO_RGB (6 << 16) +#define OVL_CON_CLRFMT_PARGB8888 (OVL_CON_CLRFMT_ARGB8888 | OVL_CON_CLRFMT_MAN)#define OVL_CON_CLRFMT_RGB565 (ovl) ((ovl)->data->fmt_rgb565_is_0 ? \ 0 : OVL_CON_CLRFMT_RGB)#define OVL_CON_CLRFMT_RGB888 (ovl) ((ovl)->data->fmt_rgb565_is_0 ? \
@@ -71,6 +75,24 @@#define OVL_CON_VIRT_FLIP BIT(9)#define OVL_CON_HORZ_FLIP BIT(10) +#define OVL_COLOR_ALPHA GENMASK(31, 24) + +static inline bool is_10bit_rgb (u32 fmt) +{ +switch (fmt) { +case DRM_FORMAT_XRGB2101010 : +case DRM_FORMAT_ARGB2101010 : +case DRM_FORMAT_RGBX1010102 : +case DRM_FORMAT_RGBA1010102 : +case DRM_FORMAT_XBGR2101010 : +case DRM_FORMAT_ABGR2101010 : +case DRM_FORMAT_BGRX1010102 : +case DRM_FORMAT_BGRA1010102 : +return true; + } +return false; +} +static const u32 mt8173_formats[] = {DRM_FORMAT_XRGB8888 ,DRM_FORMAT_ARGB8888 ,
@@ -88,12 +110,20 @@ static const u32 mt8173_formats[] = {static const u32 mt8195_formats[] = {DRM_FORMAT_XRGB8888 ,DRM_FORMAT_ARGB8888 , +DRM_FORMAT_XRGB2101010 ,DRM_FORMAT_ARGB2101010 ,DRM_FORMAT_BGRX8888 ,DRM_FORMAT_BGRA8888 , +DRM_FORMAT_BGRX1010102 ,DRM_FORMAT_BGRA1010102 ,DRM_FORMAT_ABGR8888 ,DRM_FORMAT_XBGR8888 , +DRM_FORMAT_XBGR2101010 , +DRM_FORMAT_ABGR2101010 , +DRM_FORMAT_RGBX8888 , +DRM_FORMAT_RGBA8888 , +DRM_FORMAT_RGBX1010102 , +DRM_FORMAT_RGBA1010102 ,DRM_FORMAT_RGB888 ,DRM_FORMAT_BGR888 ,DRM_FORMAT_RGB565 ,
@@ -253,9 +283,7 @@ static void mtk_ovl_set_bit_depth(struct device *dev, int idx, u32 format, reg =readl (ovl->regs +DISP_REG_OVL_CLRFMT_EXT ); reg &= ~OVL_CON_CLRFMT_BIT_DEPTH_MASK (idx); -if (format ==DRM_FORMAT_RGBA1010102 || - format ==DRM_FORMAT_BGRA1010102 || - format ==DRM_FORMAT_ARGB2101010 ) +if (is_10bit_rgb (format)) bit_depth =OVL_CON_CLRFMT_10_BIT ; reg |=OVL_CON_CLRFMT_BIT_DEPTH (bit_depth, idx);
@@ -273,7 +301,13 @@ void mtk_ovl_config(struct device *dev, unsigned int w,if (w !=0 && h !=0 )mtk_ddp_write_relaxed (cmdq_pkt, h <<16 | w, &ovl->cmdq_reg, ovl->regs,DISP_REG_OVL_ROI_SIZE ); -mtk_ddp_write_relaxed (cmdq_pkt,0x0 , &ovl->cmdq_reg, ovl->regs,DISP_REG_OVL_ROI_BGCLR ); + +/* +* The background color should be opaque black (ARGB), +* otherwise there will be no effect with alpha blend +*/ +mtk_ddp_write_relaxed (cmdq_pkt,OVL_COLOR_ALPHA , &ovl->cmdq_reg, + ovl->regs,DISP_REG_OVL_ROI_BGCLR );mtk_ddp_write (cmdq_pkt,0x1 , &ovl->cmdq_reg, ovl->regs,DISP_REG_OVL_RST );mtk_ddp_write (cmdq_pkt,0x0 , &ovl->cmdq_reg, ovl->regs,DISP_REG_OVL_RST );
@@ -353,7 +387,8 @@ void mtk_ovl_layer_off(struct device *dev, unsigned int idx, DISP_REG_OVL_RDMA_CTRL(idx)); } -static unsigned int ovl_fmt_convert (struct mtk_disp_ovl *ovl,unsigned int fmt) +static unsigned int ovl_fmt_convert (struct mtk_disp_ovl *ovl,unsigned int fmt, +unsigned int blend_mode) {/* The return value in switch "MEM_MODE_INPUT_FORMAT_XXX" * is defined in mediatek HW data sheet.
@@ -372,17 +407,37 @@ static unsigned int ovl_fmt_convert(struct mtk_disp_ovl *ovl, unsigned int fmt)return OVL_CON_CLRFMT_RGB888 (ovl) |OVL_CON_BYTE_SWAP ;case DRM_FORMAT_RGBX8888 :case DRM_FORMAT_RGBA8888 : +return blend_mode ==DRM_MODE_BLEND_COVERAGE ? +OVL_CON_CLRFMT_ARGB8888 : +OVL_CON_CLRFMT_PARGB8888 ; +case DRM_FORMAT_RGBX1010102 : +case DRM_FORMAT_RGBA1010102 :return OVL_CON_CLRFMT_ARGB8888 ;case DRM_FORMAT_BGRX8888 :case DRM_FORMAT_BGRA8888 : +return OVL_CON_BYTE_SWAP | + (blend_mode ==DRM_MODE_BLEND_COVERAGE ? +OVL_CON_CLRFMT_ARGB8888 : +OVL_CON_CLRFMT_PARGB8888 ); +case DRM_FORMAT_BGRX1010102 :case DRM_FORMAT_BGRA1010102 :return OVL_CON_CLRFMT_ARGB8888 |OVL_CON_BYTE_SWAP ;case DRM_FORMAT_XRGB8888 :case DRM_FORMAT_ARGB8888 : +return blend_mode ==DRM_MODE_BLEND_COVERAGE ? +OVL_CON_CLRFMT_RGBA8888 : +OVL_CON_CLRFMT_PARGB8888 ; +case DRM_FORMAT_XRGB2101010 :case DRM_FORMAT_ARGB2101010 :return OVL_CON_CLRFMT_RGBA8888 ;case DRM_FORMAT_XBGR8888 :case DRM_FORMAT_ABGR8888 : +return OVL_CON_RGB_SWAP | + (blend_mode ==DRM_MODE_BLEND_COVERAGE ? +OVL_CON_CLRFMT_RGBA8888 : +OVL_CON_CLRFMT_PARGB8888 ); +case DRM_FORMAT_XBGR2101010 : +case DRM_FORMAT_ABGR2101010 :return OVL_CON_CLRFMT_RGBA8888 |OVL_CON_BYTE_SWAP ;case DRM_FORMAT_UYVY :return OVL_CON_CLRFMT_UYVY |OVL_CON_MTX_YUV_TO_RGB ;
@@ -404,6 +459,8 @@ void mtk_ovl_layer_config(struct device *dev, unsigned int idx,unsigned int fmt = pending->format;unsigned int offset = (pending->y <<16 ) | pending->x;unsigned int src_size = (pending->height <<16 ) | pending->width; +unsigned int blend_mode = state->base.pixel_blend_mode; +unsigned int ignore_pixel_alpha =0 ;unsigned int con;bool is_afbc = pending->modifier !=DRM_FORMAT_MOD_LINEAR ;union overlay_pitch {
@@ -421,9 +478,14 @@ void mtk_ovl_layer_config(struct device *dev, unsigned int idx,return ; } - con =ovl_fmt_convert (ovl, fmt); -if (state->base.fb && state->base.fb->format->has_alpha) - con |=OVL_CON_AEN |OVL_CON_ALPHA ; + con =ovl_fmt_convert (ovl, fmt, blend_mode); +if (state->base.fb) { + con |=OVL_CON_AEN ; + con |= state->base.alpha &OVL_CON_ALPHA ; + } + +if (state->base.fb && !state->base.fb->format->has_alpha) + ignore_pixel_alpha =OVL_CONST_BLEND ;if (pending->rotation &DRM_MODE_REFLECT_Y ) { con |=OVL_CON_VIRT_FLIP ;
@@ -440,8 +502,8 @@ void mtk_ovl_layer_config(struct device *dev, unsigned int idx,mtk_ddp_write_relaxed (cmdq_pkt, con, &ovl->cmdq_reg, ovl->regs,DISP_REG_OVL_CON (idx)); -mtk_ddp_write_relaxed (cmdq_pkt, overlay_pitch.split_pitch.lsb, &ovl->cmdq_reg, ovl->regs, -DISP_REG_OVL_PITCH (idx)); +mtk_ddp_write_relaxed (cmdq_pkt, overlay_pitch.split_pitch.lsb | ignore_pixel_alpha, + &ovl->cmdq_reg, ovl->regs,DISP_REG_OVL_PITCH (idx));mtk_ddp_write_relaxed (cmdq_pkt, src_size, &ovl->cmdq_reg, ovl->regs,DISP_REG_OVL_SRC_SIZE (idx)); mtk_ddp_write_relaxed(cmdq_pkt, offset, &ovl->cmdq_reg, ovl->regs,
Signature · 1 line
2.18.0
Re: [PATCH v6 08/14] drm/mediatek: Support "Pre-multiplied" alpha blending in OVL
Hi, Shawn:
Quoted 76 lines · Shawn Sung
From: Hsiao Chien Sung <[email protected]>
Support "Pre-multiplied" blend mode on MediaTek's chips. Before this patch, only the "coverage" mode is supported.
Please refer to the description of the commit "drm/mediatek: Support alpha blending in display driver" for more information.
Signed-off-by Hsiao Chien Sung <[email protected]>--- drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 84 +++++++++++++++++++++ ---- 1 file changed, 73 insertions(+), 11 deletions(-)drivers/gpu/drm/mediatek/mtk_disp_ovl.c +1
-0@@ -38,6 +38,7 @@#define DISP_REG_OVL_PITCH_MSB (n) (0x0040 + 0x20 * (n))#define OVL_PITCH_MSB_2ND_SUBBUF BIT(16)#define DISP_REG_OVL_PITCH (n) (0x0044 + 0x20 * (n)) +#define OVL_CONST_BLEND BIT(28)#define DISP_REG_OVL_RDMA_CTRL (n) (0x00c0 + 0x20 * (n))#define DISP_REG_OVL_RDMA_GMC (n) (0x00c8 + 0x20 * (n))#define
DISP_REG_OVL_ADDR_MT27010x0040drivers/gpu/drm/mediatek/mtk_disp_ovl.c +4
-1@@ -51,13 +52,16 @@#define GMC_THRESHOLD_HIGH ((1 << GMC_THRESHOLD_BITS) / 4)#define GMC_THRESHOLD_LOW ((1 << GMC_THRESHOLD_BITS) / 8) +#define OVL_CON_CLRFMT_MAN BIT(23)#define OVL_CON_BYTE_SWAP BIT(24) -#define OVL_CON_MTX_YUV_TO_RGB (6 << 16) +#define OVL_CON_RGB_SWAP BIT(25)#define OVL_CON_CLRFMT_RGB (1 << 12)#define OVL_CON_CLRFMT_RGBA8888 (2 << 12)#define OVL_CON_CLRFMT_ARGB8888 (3 << 12)#define OVL_CON_CLRFMT_UYVY (4 << 12)#define OVL_CON_CLRFMT_YUYV (5 << 12) +#define OVL_CON_MTX_YUV_TO_RGB (6 << 16) +#define OVL_CON_CLRFMT_PARGB8888 (OVL_CON_CLRFMT_ARGB8888 | OVL_CON_CLRFMT_MAN)#define OVL_CON_CLRFMT_RGB565 (ovl) ((ovl)->data->fmt_rgb565_is_0 ? \0 :
OVL_CON_CLRFMT_RGB)
#defineOVL_CON_CLRFMT_RGB888(ovl)((ovl)->data->fmt_rgb565_is_0 ?
\drivers/gpu/drm/mediatek/mtk_disp_ovl.c +18
-0@@ -71,6 +75,24 @@#define OVL_CON_VIRT_FLIP BIT(9)#define OVL_CON_HORZ_FLIP BIT(10) +#define OVL_COLOR_ALPHA GENMASK(31, 24) + +static inline bool is_10bit_rgb (u32 fmt) +{ +switch (fmt) { +case DRM_FORMAT_XRGB2101010 : +case DRM_FORMAT_ARGB2101010 : +case DRM_FORMAT_RGBX1010102 : +case DRM_FORMAT_RGBA1010102 : +case DRM_FORMAT_XBGR2101010 : +case DRM_FORMAT_ABGR2101010 : +case DRM_FORMAT_BGRX1010102 : +case DRM_FORMAT_BGRA1010102 : +return true; + } +return false; +} +static const u32 mt8173_formats[] = {DRM_FORMAT_XRGB8888 ,DRM_FORMAT_ARGB8888 ,
drivers/gpu/drm/mediatek/mtk_disp_ovl.c static const u32 mt8173_formats[] = { · line 113
Quoted 4 lines
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +1
-0@@ -88,12 +110,20 @@ static const u32 mt8173_formats[] = {static const u32 mt8195_formats[] = {DRM_FORMAT_XRGB8888 ,DRM_FORMAT_ARGB8888 , +DRM_FORMAT_XRGB2101010 ,
As I know, the 'X' in XRGB means garbage data. It's not alpha. And pre- multiplied alpha formula is:
result = source RGB + (destination RGB * (1 - source alpha))
So pre-multiplied alpha need source alpha. I think XRGB is not related to pre-multiplied alpha. So separate X-related format to another patch.
drivers/gpu/drm/mediatek/mtk_disp_ovl.c static const u32 mt8173_formats[] = { · line 122
Quoted 9 lines
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +3
-0DRM_FORMAT_ARGB2101010 ,DRM_FORMAT_BGRX8888 ,DRM_FORMAT_BGRA8888 , +DRM_FORMAT_BGRX1010102 ,DRM_FORMAT_BGRA1010102 ,DRM_FORMAT_ABGR8888 ,DRM_FORMAT_XBGR8888 , +DRM_FORMAT_XBGR2101010 , + DRM_FORMAT_ABGR2101010,
It seems 10 bits format has no pre-multiplied alpha function. So separate 10 bits format modification to another patch.
drivers/gpu/drm/mediatek/mtk_disp_ovl.c static const u32 mt8173_formats[] = { · line 124
Quoted 2 lines
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +2
-0+DRM_FORMAT_RGBX8888 , + DRM_FORMAT_RGBA8888,
For RGBA8888, it both has coverage mode and pre-multiplied mode, so it's not strongly related to pre-multiplied alpha. Separate this to another patch which add support this new format.
Quoted 32 lines
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +3
-3+DRM_FORMAT_RGBX1010102 , +DRM_FORMAT_RGBA1010102 ,DRM_FORMAT_RGB888 ,DRM_FORMAT_BGR888 , DRM_FORMAT_RGB565,@@ -253,9 +283,7 @@ static void mtk_ovl_set_bit_depth(struct device *dev, int idx, u32 format, reg =readl (ovl->regs +DISP_REG_OVL_CLRFMT_EXT ); reg &= ~OVL_CON_CLRFMT_BIT_DEPTH_MASK (idx); -if (format ==DRM_FORMAT_RGBA1010102 || - format ==DRM_FORMAT_BGRA1010102 || - format ==DRM_FORMAT_ARGB2101010 ) +if (is_10bit_rgb (format)) bit_depth =OVL_CON_CLRFMT_10_BIT ;drivers/gpu/drm/mediatek/mtk_disp_ovl.c +6
-1reg |=OVL_CON_CLRFMT_BIT_DEPTH (bit_depth, idx);@@ -273,7 +301,13 @@ void mtk_ovl_config(struct device *dev, unsigned int w, if (w != 0 && h != 0) mtk_ddp_write_relaxed(cmdq_pkt, h << 16 | w, &ovl- >cmdq_reg, ovl->regs, DISP_REG_OVL_ROI_SIZE); -mtk_ddp_write_relaxed (cmdq_pkt,0x0 , &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_ROI_BGCLR); + +/* +* The background color should be opaque black (ARGB), +* otherwise there will be no effect with alpha blend +*/ + mtk_ddp_write_relaxed(cmdq_pkt, OVL_COLOR_ALPHA, &ovl-Quoted 1 line
cmdq_reg,
drivers/gpu/drm/mediatek/mtk_disp_ovl.c void mtk_ovl_config(struct device *dev, unsigned int w, · line 310
Quoted 1 line
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +1
-0+ ovl->regs, DISP_REG_OVL_ROI_BGCLR);
The pre-multiplied alpha formula is:
result = source RGB + (destination RGB * (1 - source alpha))
It does not care destination alpha. Background color is the destination, so describe more detail why need this modification. For example, how does hardware calculate with back ground color?
Quoted 70 lines
mtk_ddp_write(cmdq_pkt,
0x1,&ovl->cmdq_reg,ovl->regs,DISP_REG_OVL_RST);
mtk_ddp_write(cmdq_pkt,0x0,&ovl->cmdq_reg,ovl->regs,DISP_REG_OVL_RST);drivers/gpu/drm/mediatek/mtk_disp_ovl.c +2
-1@@ -353,7 +387,8 @@ void mtk_ovl_layer_off(struct device *dev,unsigned int idx, DISP_REG_OVL_RDMA_CTRL(idx)); } -static unsigned int ovl_fmt_convert(struct mtk_disp_ovl *ovl, unsigned int fmt) +static unsigned int ovl_fmt_convert (struct mtk_disp_ovl *ovl,unsigned int fmt, +unsigned int blend_mode){
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +20
-0/* The return value in switch "MEM_MODE_INPUT_FORMAT_XXX" * is defined in mediatek HW data sheet. @@ -372,17 +407,37 @@ static unsigned int ovl_fmt_convert(struct mtk_disp_ovl *ovl, unsigned int fmt) return OVL_CON_CLRFMT_RGB888(ovl) | OVL_CON_BYTE_SWAP;case DRM_FORMAT_RGBX8888 :case DRM_FORMAT_RGBA8888 : +return blend_mode ==DRM_MODE_BLEND_COVERAGE ? +OVL_CON_CLRFMT_ARGB8888 : +OVL_CON_CLRFMT_PARGB8888 ; +case DRM_FORMAT_RGBX1010102 : +case DRM_FORMAT_RGBA1010102 :return OVL_CON_CLRFMT_ARGB8888 ;case DRM_FORMAT_BGRX8888 :case DRM_FORMAT_BGRA8888 : +return OVL_CON_BYTE_SWAP | + (blend_mode ==DRM_MODE_BLEND_COVERAGE ? +OVL_CON_CLRFMT_ARGB8888 : +OVL_CON_CLRFMT_PARGB8888 ); +case DRM_FORMAT_BGRX1010102 :case DRM_FORMAT_BGRA1010102 :return OVL_CON_CLRFMT_ARGB8888 |OVL_CON_BYTE_SWAP ;case DRM_FORMAT_XRGB8888 :case DRM_FORMAT_ARGB8888 : +return blend_mode ==DRM_MODE_BLEND_COVERAGE ? +OVL_CON_CLRFMT_RGBA8888 : +OVL_CON_CLRFMT_PARGB8888 ; +case DRM_FORMAT_XRGB2101010 :case DRM_FORMAT_ARGB2101010 :return OVL_CON_CLRFMT_RGBA8888 ;case DRM_FORMAT_XBGR8888 :case DRM_FORMAT_ABGR8888 : +return OVL_CON_RGB_SWAP | + (blend_mode ==DRM_MODE_BLEND_COVERAGE ? +OVL_CON_CLRFMT_RGBA8888 : +OVL_CON_CLRFMT_PARGB8888 ); +case DRM_FORMAT_XBGR2101010 : +case DRM_FORMAT_ABGR2101010 :return OVL_CON_CLRFMT_RGBA8888 |OVL_CON_BYTE_SWAP ;case DRM_FORMAT_UYVY :drivers/gpu/drm/mediatek/mtk_disp_ovl.c +2
-0return OVL_CON_CLRFMT_UYVY |OVL_CON_MTX_YUV_TO_RGB ;@@ -404,6 +459,8 @@ void mtk_ovl_layer_config(struct device *dev,unsigned int idx, unsigned int fmt = pending->format;unsigned int offset = (pending->y <<16 ) | pending->x;unsigned int src_size = (pending->height <<16 ) | pending- >width; +unsigned int blend_mode = state->base.pixel_blend_mode; +unsigned int ignore_pixel_alpha =0 ;unsigned int con;drivers/gpu/drm/mediatek/mtk_disp_ovl.c +0
-0bool is_afbc = pending->modifier !=DRM_FORMAT_MOD_LINEAR ;union overlay_pitch {@@ -421,9 +478,14 @@ void mtk_ovl_layer_config(struct device *dev, unsigned int idx,
drivers/gpu/drm/mediatek/mtk_disp_ovl.c void mtk_ovl_layer_config(struct device *dev, · line 485
Quoted 10 lines
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +4
-3return ; } - con =ovl_fmt_convert (ovl, fmt); -if (state->base.fb && state->base.fb->format->has_alpha) - con |=OVL_CON_AEN |OVL_CON_ALPHA ; + con =ovl_fmt_convert (ovl, fmt, blend_mode); +if (state->base.fb) { + con |=OVL_CON_AEN ; + con |= state->base.alpha &OVL_CON_ALPHA ;
Now support pixel alpha, and this seems to support plane alpha. So separate this to another patch. If possible, describe how plane alpha calculate with pixel alpha.
drivers/gpu/drm/mediatek/mtk_disp_ovl.c void mtk_ovl_layer_config(struct device *dev, unsigned int idx, · line 488
Quoted 4 lines
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +4
-0+ } + +if (state->base.fb && !state->base.fb->format->has_alpha) + ignore_pixel_alpha =OVL_CONST_BLEND ;
Ditto.
Regards,
CK
Quoted 20 lines
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +2
-2if (pending->rotation &DRM_MODE_REFLECT_Y ) { con |=OVL_CON_VIRT_FLIP ;@@ -440,8 +502,8 @@ void mtk_ovl_layer_config(struct device *dev,unsigned int idx, mtk_ddp_write_relaxed(cmdq_pkt, con, &ovl->cmdq_reg, ovl->regs,DISP_REG_OVL_CON (idx )); -mtk_ddp_write_relaxed (cmdq_pkt, overlay_pitch.split_pitch.lsb, &ovl->cmdq_reg, ovl->regs, -DISP_REG_OVL_PITCH (idx)); + mtk_ddp_write_relaxed(cmdq_pkt, overlay_pitch.split_pitch.lsb | ignore_pixel_alpha, + &ovl->cmdq_reg, ovl->regs,
DISP_REG_OVL_PITCH(idx));
mtk_ddp_write_relaxed(cmdq_pkt,src_size,&ovl->cmdq_reg, ovl-Quoted 1 line
regs,
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +0
-0DISP_REG_OVL_SRC_SIZE(idx)); mtk_ddp_write_relaxed(cmdq_pkt, offset, &ovl->cmdq_reg, ovl-Quoted 1 line
regs,
PATCH v6 9/14 drm/mediatek: Support "Pre-multiplied" alpha blending in Mixer
In reply to Shawn SungFrom: Hsiao Chien Sung <[email protected]>
Support "Pre-multiplied" blend mode on MediaTek's chips. Before this patch, only the "Coverage" mode is supported.
Please refer to the description of the commit "drm/mediatek: Support alpha blending in display driver" for more information.
--- drivers/gpu/drm/mediatek/mtk_ethdr.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-)
drivers/gpu/drm/mediatek/mtk_ethdr.c +18 -7
@@ -5,6 +5,7 @@#include <drm/drm_fourcc.h> #include <drm/drm_framebuffer.h> +#include <drm/drm_blend.h> #include <linux/clk.h> #include <linux/component.h> #include <linux/of.h>
@@ -35,6 +36,7 @@#define MIX_SRC_L0_EN BIT(0)#define MIX_L_SRC_CON (n) (0x28 + 0x18 * (n))#define NON_PREMULTI_SOURCE (2 << 12) +#define PREMULTI_SOURCE (3 << 12)#define MIX_L_SRC_SIZE (n) (0x30 + 0x18 * (n))#define MIX_L_SRC_OFFSET (n) (0x34 + 0x18 * (n))#define MIX_FUNC_DCM0 0x120
@@ -153,7 +155,8 @@ void mtk_ethdr_layer_config(struct device *dev, unsigned int idx,struct mtk_plane_pending_state *pending = &state->pending;unsigned int offset = (pending->x &1 ) <<31 | pending->y <<16 | pending->x;unsigned int align_width =ALIGN_DOWN (pending->width,2 ); -unsigned int alpha_con =0 ; +unsigned int mix_con =NON_PREMULTI_SOURCE ; +bool replace_src_a = false;dev_dbg (dev,"%s+ idx:%d" , __func__, idx);
@@ -170,19 +173,27 @@ void mtk_ethdr_layer_config(struct device *dev, unsigned int idx,return ; } -if (state->base.fb && state->base.fb->format->has_alpha) - alpha_con =MIXER_ALPHA_AEN |MIXER_ALPHA ; + mix_con |=MIXER_ALPHA_AEN | (state->base.alpha &MIXER_ALPHA ); -mtk_mmsys_mixer_in_config (priv->mmsys_dev, idx +1 , alpha_con ? false : true, -DEFAULT_9BIT_ALPHA , +if (state->base.pixel_blend_mode !=DRM_MODE_BLEND_COVERAGE ) + mix_con |=PREMULTI_SOURCE ; + +if (state->base.fb && !state->base.fb->format->has_alpha) { +/* +* Mixer doesn't support CONST_BLD mode, +* use a trick to make the output equivalent +*/ + replace_src_a = true; + } + +mtk_mmsys_mixer_in_config (priv->mmsys_dev, idx +1 , replace_src_a,MIXER_ALPHA , pending->x &1 ?MIXER_INX_MODE_EVEN_EXTEND :MIXER_INX_MODE_BYPASS , align_width /2 -1 , cmdq_pkt);mtk_ddp_write (cmdq_pkt, pending->height <<16 | align_width, &mixer->cmdq_base, mixer->regs,MIX_L_SRC_SIZE (idx));mtk_ddp_write (cmdq_pkt, offset, &mixer->cmdq_base, mixer->regs,MIX_L_SRC_OFFSET (idx)); -mtk_ddp_write_mask (cmdq_pkt, alpha_con, &mixer->cmdq_base, mixer->regs,MIX_L_SRC_CON (idx), -0x1ff ); +mtk_ddp_write (cmdq_pkt, mix_con, &mixer->cmdq_base, mixer->regs,MIX_L_SRC_CON (idx));mtk_ddp_write_mask (cmdq_pkt,BIT (idx), &mixer->cmdq_base, mixer->regs,MIX_SRC_CON ,BIT (idx)); }
Signature · 1 line
2.18.0
Re: [PATCH v6 09/14] drm/mediatek: Support "Pre-multiplied" alpha blending in Mixer
Hi, Shawn:
Quoted 36 lines · Shawn Sung
From: Hsiao Chien Sung <[email protected]>
Support "Pre-multiplied" blend mode on MediaTek's chips. Before this patch, only the "Coverage" mode is supported.
Please refer to the description of the commit "drm/mediatek: Support alpha blending in display driver" for more information.
Signed-off-by Hsiao Chien Sung <[email protected]>--- drivers/gpu/drm/mediatek/mtk_ethdr.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-)drivers/gpu/drm/mediatek/mtk_ethdr.c +2
-0@@ -5,6 +5,7 @@#include <drm/drm_fourcc.h> #include <drm/drm_framebuffer.h> +#include <drm/drm_blend.h> #include <linux/clk.h> #include <linux/component.h> #include <linux/of.h> @@ -35,6 +36,7 @@#define MIX_SRC_L0_EN BIT(0)#define MIX_L_SRC_CON (n) (0x28 + 0x18 * (n))#define NON_PREMULTI_SOURCE (2 << 12) +#define PREMULTI_SOURCE (3 << 12)#define MIX_L_SRC_SIZE (n) (0x30 + 0x18 * (n))#define MIX_L_SRC_OFFSET (n) (0x34 + 0x18 * (n))#define MIX_FUNC_DCM0 0x120
drivers/gpu/drm/mediatek/mtk_ethdr.c void mtk_ethdr_layer_config(struct device *dev, · line 160
Quoted 7 lines
drivers/gpu/drm/mediatek/mtk_ethdr.c +1
-1@@ -153,7 +155,8 @@ void mtk_ethdr_layer_config(struct device *dev,unsigned int idx, struct mtk_plane_pending_state *pending = &state->pending;unsigned int offset = (pending->x &1 ) <<31 | pending->y <<16 | pending->x;unsigned int align_width =ALIGN_DOWN (pending->width,2 ); -unsigned int alpha_con =0 ; +unsigned int mix_con =NON_PREMULTI_SOURCE ;
I think you should not assign here. You should choose one of PREMULTI_SOURCE or NON_PREMULTI_SOURCE later.
drivers/gpu/drm/mediatek/mtk_ethdr.c void mtk_ethdr_layer_config(struct device *dev, · line 177
Quoted 12 lines
drivers/gpu/drm/mediatek/mtk_ethdr.c +1
-0+bool replace_src_a = false;drivers/gpu/drm/mediatek/mtk_ethdr.c +1
-2dev_dbg (dev,"%s+ idx:%d" , __func__, idx);@@ -170,19 +173,27 @@ void mtk_ethdr_layer_config(struct device *dev,unsigned int idx, return; } -if (state->base.fb && state->base.fb->format->has_alpha) - alpha_con =MIXER_ALPHA_AEN |MIXER_ALPHA ; + mix_con |=MIXER_ALPHA_AEN | (state->base.alpha &MIXER_ALPHA );
Now support pixel alpha, and this seems to support plane alpha. Separate this to another patch.
drivers/gpu/drm/mediatek/mtk_ethdr.c void mtk_ethdr_layer_config(struct device *dev, unsigned int idx, · line 186
Quoted 13 lines
drivers/gpu/drm/mediatek/mtk_ethdr.c +9
-2- mtk_mmsys_mixer_in_config(priv->mmsys_dev, idx + 1, alpha_con ? false : true, - DEFAULT_9BIT_ALPHA, +if (state->base.pixel_blend_mode !=DRM_MODE_BLEND_COVERAGE ) + mix_con |=PREMULTI_SOURCE ; + +if (state->base.fb && !state->base.fb->format->has_alpha) { +/* +* Mixer doesn't support CONST_BLD mode, +* use a trick to make the output equivalent +*/ + replace_src_a = true;
Ditto.
Regards,
CK
Quoted 23 lines
drivers/gpu/drm/mediatek/mtk_ethdr.c +3
-0+ } + + mtk_mmsys_mixer_in_config(priv->mmsys_dev, idx + 1, replace_src_a, MIXER_ALPHA, pending->x & 1 ?
MIXER_INX_MODE_EVEN_EXTEND:
MIXER_INX_MODE_BYPASS,align_width/
2 - 1,cmdq_pkt);mtk_ddp_write(cmdq_pkt,
pending->height<< 16 |align_width,&mixer->cmdq_base,drivers/gpu/drm/mediatek/mtk_ethdr.c +0
-0mixer->regs, MIX_L_SRC_SIZE(idx)); mtk_ddp_write(cmdq_pkt, offset, &mixer->cmdq_base, mixer->regs,
MIX_L_SRC_OFFSET(idx));drivers/gpu/drm/mediatek/mtk_ethdr.c +0
-1- mtk_ddp_write_mask(cmdq_pkt, alpha_con, &mixer->cmdq_base,
mixer->regs,MIX_L_SRC_CON(idx),drivers/gpu/drm/mediatek/mtk_ethdr.c +1
-1- 0x1ff); + mtk_ddp_write(cmdq_pkt, mix_con, &mixer->cmdq_base, mixer-Quoted 1 line
regs,
MIX_L_SRC_CON(idx));mtk_ddp_write_mask(cmdq_pkt, BIT(idx),
&mixer->cmdq_base,mixer->regs,MIX_SRC_CON,
BIT(idx));
}
PATCH v6 10/14 drm/mediatek: Support "None" alpha blending in OVL
In reply to Shawn SungFrom: Hsiao Chien Sung <[email protected]>
Support "None" blend mode on MediaTek's chips.
Please refer to the description of the commit "drm/mediatek: Support alpha blending in display driver" for more information.
--- drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +2 -1
@@ -484,7 +484,8 @@ void mtk_ovl_layer_config(struct device *dev, unsigned int idx, con |= state->base.alpha &OVL_CON_ALPHA ; } -if (state->base.fb && !state->base.fb->format->has_alpha) +if (blend_mode ==DRM_MODE_BLEND_PIXEL_NONE || + (state->base.fb && !state->base.fb->format->has_alpha)) ignore_pixel_alpha =OVL_CONST_BLEND ;if (pending->rotation &DRM_MODE_REFLECT_Y ) {
Signature · 1 line
2.18.0
Re: [PATCH v6 10/14] drm/mediatek: Support "None" alpha blending in OVL
Hi, Shawn:
Quoted 7 lines · Shawn Sung
From: Hsiao Chien Sung <[email protected]>
Support "None" blend mode on MediaTek's chips.
Please refer to the description of the commit "drm/mediatek: Support alpha blending in display driver" for more information.
Quoted 22 lines
Signed-off-by Hsiao Chien Sung <[email protected]>--- drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)drivers/gpu/drm/mediatek/mtk_disp_ovl.c +2
-1@@ -484,7 +484,8 @@ void mtk_ovl_layer_config(struct device *dev,unsigned int idx, con |= state->base.alpha & OVL_CON_ALPHA; } -if (state->base.fb && !state->base.fb->format->has_alpha) +if (blend_mode ==DRM_MODE_BLEND_PIXEL_NONE || + (state->base.fb && !state->base.fb->format->has_alpha)) ignore_pixel_alpha =OVL_CONST_BLEND ;if (
pending->rotation&DRM_MODE_REFLECT_Y) {
PATCH v6 11/14 drm/mediatek: Support "None" alpha blending in Mixer
In reply to Shawn SungFrom: Hsiao Chien Sung <[email protected]>
Support "None" blend mode on MediaTek's chips.
Please refer to the description of the commit "drm/mediatek: Support alpha blending in display driver" for more information.
--- drivers/gpu/drm/mediatek/mtk_ethdr.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/gpu/drm/mediatek/mtk_ethdr.c +2 -1
@@ -178,7 +178,8 @@ void mtk_ethdr_layer_config(struct device *dev, unsigned int idx,if (state->base.pixel_blend_mode !=DRM_MODE_BLEND_COVERAGE ) mix_con |=PREMULTI_SOURCE ; -if (state->base.fb && !state->base.fb->format->has_alpha) { +if (state->base.pixel_blend_mode ==DRM_MODE_BLEND_PIXEL_NONE || + (state->base.fb && !state->base.fb->format->has_alpha)) {/* * Mixer doesn't support CONST_BLD mode, * use a trick to make the output equivalent
Signature · 1 line
2.18.0
Re: [PATCH v6 11/14] drm/mediatek: Support "None" alpha blending in Mixer
Hi, Shawn:
Quoted 7 lines · Shawn Sung
From: Hsiao Chien Sung <[email protected]>
Support "None" blend mode on MediaTek's chips.
Please refer to the description of the commit "drm/mediatek: Support alpha blending in display driver" for more information.
But I would like you to describe the information in this patch instead of referring to another patch. This patch could describe more detail, and the integration patch could describe more brief.
Regards,
CK
Quoted 23 lines
Signed-off-by Hsiao Chien Sung <[email protected]>--- drivers/gpu/drm/mediatek/mtk_ethdr.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)drivers/gpu/drm/mediatek/mtk_ethdr.c +1
-1@@ -178,7 +178,8 @@ void mtk_ethdr_layer_config(struct device *dev, unsigned int idx, if (state->base.pixel_blend_mode != DRM_MODE_BLEND_COVERAGE) mix_con |= PREMULTI_SOURCE; -if (state->base.fb && !state->base.fb->format->has_alpha) { + if (state->base.pixel_blend_mode == DRM_MODE_BLEND_PIXEL_NONE||
drivers/gpu/drm/mediatek/mtk_ethdr.c +1
-0+ (state->base.fb && !state->base.fb->format->has_alpha)) {/* * Mixer doesn't support CONST_BLD mode, * use a trick to make the output equivalent
Re: [PATCH v6 11/14] drm/mediatek: Support "None" alpha blending in Mixer
Hi CK,
Quoted 7 lines · CK Hu (胡俊光)
Hi, Shawn:
Quoted 4 lines · Shawn Sung
From: Hsiao Chien Sung <[email protected]>
Support "None" blend mode on MediaTek's chips.
Quoted 9 lines
Quoted 3 lines
Please refer to the description of the commit "drm/mediatek: Support alpha blending in display driver" for more information.
But I would like you to describe the information in this patch instead
of referring to another patch. This patch could describe more detail, and the integration patch could describe more brief.
Got it. Will try to add more information to all the related patches.
Thanks,
Shawn
PATCH v6 12/14 drm/mediatek: Support CRC in display driver
In reply to Shawn SungFrom: Hsiao Chien Sung <[email protected]>
Register CRC related function pointers to support
CRC retrieval.
--- drivers/gpu/drm/mediatek/mtk_crtc.c | 260 ++++++++++++++++++++++++ drivers/gpu/drm/mediatek/mtk_crtc.h | 38 ++++ drivers/gpu/drm/mediatek/mtk_ddp_comp.h | 3 + 3 files changed, 301 insertions(+)
drivers/gpu/drm/mediatek/mtk_crtc.c +260 -0
@@ -18,6 +18,7 @@#include <drm/drm_atomic_helper.h> #include <drm/drm_probe_helper.h> #include <drm/drm_vblank.h> +#include <drm/drm_vblank_work.h> #include "mtk_crtc.h" #include "mtk_ddp_comp.h"
@@ -69,6 +70,9 @@ struct mtk_crtc {/* lock for display hardware access */ struct mutex hw_lock;bool config_updating; + +struct mtk_ddp_comp *crc_provider; +struct drm_vblank_work crc_work; };struct mtk_crtc_state {
@@ -703,6 +707,71 @@ static void mtk_crtc_update_output(struct drm_crtc *crtc, } } +static void mtk_crtc_crc_work (struct kthread_work *base) +{ +struct drm_vblank_work *work =to_drm_vblank_work (base); +struct mtk_crtc *mtk_crtc = +container_of (work,typeof (*mtk_crtc), crc_work); + +if (mtk_crtc->base.crc.opened) { +struct mtk_ddp_comp *comp = mtk_crtc->crc_provider; +u64 vblank =drm_crtc_vblank_count (&mtk_crtc->base); + + comp->funcs->crc_read (comp->dev); + +/* could take more than 50ms to finish */ +drm_crtc_add_crc_entry (&mtk_crtc->base, true, vblank, + comp->funcs->crc_entry (comp->dev)); + +drm_vblank_work_schedule (&mtk_crtc->crc_work, vblank +1 , true); + } +} + +static int mtk_crtc_set_crc_source (struct drm_crtc *crtc,const char *src) +{ +struct mtk_crtc *mtk_crtc =to_mtk_crtc (crtc); + +if (!src) +return -EINVAL ; + +if (strcmp (src,"auto" ) !=0 ) { +DRM_ERROR ("%s(crtc-%d): unknown source '%s'\n" , + __func__,drm_crtc_index (crtc), src); +return -EINVAL ; + } + +/* +* skip the first crc because the first frame (vblank + 1) is configured +* by mtk_crtc_ddp_hw_init() when atomic enable +*/ +drm_vblank_work_schedule (&mtk_crtc->crc_work, +drm_crtc_vblank_count (crtc) +2 , false); +return 0 ; +} + +static int mtk_crtc_verify_crc_source (struct drm_crtc *crtc,const char *src, +size_t *cnt) +{ +struct mtk_crtc *mtk_crtc =to_mtk_crtc (crtc); +struct mtk_ddp_comp *comp = mtk_crtc->crc_provider; + +if (!comp) { +DRM_ERROR ("%s(crtc-%d): no crc provider\n" , + __func__,drm_crtc_index (crtc)); +return -ENOENT ; + } + +if (src &&strcmp (src,"auto" ) !=0 ) { +DRM_ERROR ("%s(crtc-%d): unknown source '%s'\n" , + __func__,drm_crtc_index (crtc), src); +return -EINVAL ; + } + + *cnt = comp->funcs->crc_cnt (comp->dev); + +return 0 ; +} +int mtk_crtc_plane_check (struct drm_crtc *crtc,struct drm_plane *plane,struct mtk_plane_state *state) {
@@ -751,6 +820,8 @@ static void mtk_crtc_atomic_enable(struct drm_crtc *crtc,drm_crtc_vblank_on (crtc); mtk_crtc->enabled = true; + +drm_vblank_work_init (&mtk_crtc->crc_work, crtc, mtk_crtc_crc_work); } static void mtk_crtc_atomic_disable(struct drm_crtc *crtc,
@@ -840,6 +911,8 @@ static const struct drm_crtc_funcs mtk_crtc_funcs = { .atomic_destroy_state = mtk_crtc_destroy_state, .enable_vblank = mtk_crtc_enable_vblank, .disable_vblank = mtk_crtc_disable_vblank, + .set_crc_source = mtk_crtc_set_crc_source, + .verify_crc_source = mtk_crtc_verify_crc_source, };static const struct drm_crtc_helper_funcs mtk_crtc_helper_funcs = {
@@ -1033,6 +1106,11 @@ int mtk_crtc_create(struct drm_device *drm_dev, const unsigned int *path,if (comp->funcs->ctm_set) has_ctm = true; + +if (comp->funcs->crc_cnt && + comp->funcs->crc_entry && + comp->funcs->crc_read) + mtk_crtc->crc_provider = comp; } mtk_ddp_comp_register_vblank_cb(comp, mtk_crtc_ddp_irq,
@@ -1136,3 +1214,185 @@ int mtk_crtc_create(struct drm_device *drm_dev, const unsigned int *path,return 0 ; } + +void mtk_crtc_init_crc (struct mtk_crtc_crc *crc,const u32 *crc_offset_table, +size_t crc_count,u32 reset_offset,u32 reset_mask) +{ + crc->ofs = crc_offset_table; + crc->cnt = crc_count; + crc->rst_ofs = reset_offset; + crc->rst_msk = reset_mask; + crc->va =kcalloc (crc->cnt,sizeof (*crc->va),GFP_KERNEL ); +if (!crc->va) { +DRM_ERROR ("failed to allocate memory for crc\n" ); + crc->cnt =0 ; + } +} + +void mtk_crtc_read_crc (struct mtk_crtc_crc *crc,void __iomem *reg) +{ +if (!crc->cnt || !crc->ofs || !crc->va) +return ; + +#if IS_REACHABLE (CONFIG_MTK_CMDQ ) +/* sync to see the most up-to-date copy of the DMA buffer */ +dma_sync_single_for_cpu (crc->cmdq_client.chan->mbox->dev, + crc->pa, crc->cnt *sizeof (*crc->va), +DMA_FROM_DEVICE ); +#endif +} + +void mtk_crtc_destroy_crc (struct mtk_crtc_crc *crc) +{ +if (!crc->cnt) +return ; + +#if IS_REACHABLE (CONFIG_MTK_CMDQ ) +if (crc->pa) { +dma_unmap_single (crc->cmdq_client.chan->mbox->dev, + crc->pa, crc->cnt *sizeof (*crc->va), +DMA_TO_DEVICE ); + crc->pa =0 ; + } +if (crc->cmdq_client.chan) { +mtk_drm_cmdq_pkt_destroy (&crc->cmdq_handle); +mbox_free_channel (crc->cmdq_client.chan); + crc->cmdq_client.chan =NULL ; + } +#endif +kfree (crc->va); + crc->va =NULL ; + crc->cnt =0 ; +} + +#if IS_REACHABLE (CONFIG_MTK_CMDQ ) +/** +* mtk_crtc_create_crc_cmdq - Create a CMDQ thread for syncing the CRCs +* @dev: Kernel device node of the CRC provider +* @crc: Pointer of the CRC to init +* +* This function will create a looping thread on GCE (Global Command Engine) to +* keep the CRC up to date by monitoring the assigned event (usually the frame +* done event) of the CRC provider, and read the CRCs from the registers to a +* shared memory for the workqueue to read. To start/stop the looping thread, +* please call `mtk_crtc_start_crc_cmdq()` and `mtk_crtc_stop_crc_cmdq()` +* defined blow. +* +* The reason why we don't update the CRCs with CPU is that the front porch of +* 4K60 timing in CEA-861 is less than 60us, and register read/write speed is +* relatively unreliable comparing to GCE due to the bus design. +* +* We must create a new thread instead of using the original one for plane +* update is because: +* 1. We cannot add another wait-for-event command at the end of cmdq packet, or +* the cmdq callback will delay for too long +* 2. Will get the CRC of the previous frame if using the existed wait-for-event +* command which is at the beginning of the packet +*/ +void mtk_crtc_create_crc_cmdq (struct device *dev,struct mtk_crtc_crc *crc) +{ +int i; + +if (!crc->cnt) { +dev_warn (dev,"%s: not support\n" , __func__); + goto cleanup; + } + +if (!crc->ofs) { +dev_warn (dev,"%s: not defined\n" , __func__); + goto cleanup; + } + + crc->cmdq_client.client.dev = dev; + crc->cmdq_client.client.tx_block = false; + crc->cmdq_client.client.knows_txdone = true; + crc->cmdq_client.client.rx_callback =NULL ; + crc->cmdq_client.chan =mbox_request_channel (&crc->cmdq_client.client,0 ); +if (IS_ERR (crc->cmdq_client.chan)) { +dev_warn (dev,"%s: failed to create mailbox client\n" , __func__); + crc->cmdq_client.chan =NULL ; + goto cleanup; + } + +if (mtk_drm_cmdq_pkt_create (&crc->cmdq_client, &crc->cmdq_handle,PAGE_SIZE )) { +dev_warn (dev,"%s: failed to create cmdq packet\n" , __func__); + goto cleanup; + } + +if (!crc->va) { +dev_warn (dev,"%s: no memory\n" , __func__); + goto cleanup; + } + +/* map the entry to get a dma address for cmdq to store the crc */ + crc->pa =dma_map_single (crc->cmdq_client.chan->mbox->dev, + crc->va, crc->cnt *sizeof (*crc->va), +DMA_FROM_DEVICE ); + +if (dma_mapping_error (crc->cmdq_client.chan->mbox->dev, crc->pa)) { +dev_err (dev,"%s: failed to map dma\n" , __func__); + goto cleanup; + } + +if (crc->cmdq_event) +cmdq_pkt_wfe (&crc->cmdq_handle, crc->cmdq_event, true); + +for (i =0 ; i < crc->cnt; i++) { +/* put crc to spr1 register */ +cmdq_pkt_read_s (&crc->cmdq_handle, crc->cmdq_reg->subsys, + crc->cmdq_reg->offset + crc->ofs[i], +CMDQ_THR_SPR_IDX1 ); + +/* copy spr1 register to physical address of the crc */ +cmdq_pkt_assign (&crc->cmdq_handle,CMDQ_THR_SPR_IDX0 , +CMDQ_ADDR_HIGH (crc->pa + i *sizeof (*crc->va))); +cmdq_pkt_write_s (&crc->cmdq_handle,CMDQ_THR_SPR_IDX0 , +CMDQ_ADDR_LOW (crc->pa + i *sizeof (*crc->va)), +CMDQ_THR_SPR_IDX1 ); + } +/* reset crc */ +mtk_ddp_write_mask (&crc->cmdq_handle, ~0 , crc->cmdq_reg,0 , + crc->rst_ofs, crc->rst_msk); + +/* clear reset bit */ +mtk_ddp_write_mask (&crc->cmdq_handle,0 , crc->cmdq_reg,0 , + crc->rst_ofs, crc->rst_msk); + +/* jump to head of the cmdq packet */ +cmdq_pkt_jump (&crc->cmdq_handle, crc->cmdq_handle.pa_base); + +return ; +cleanup: +mtk_crtc_destroy_crc (crc); +} + +/** +* mtk_crtc_start_crc_cmdq - Start the GCE looping thread for CRC update +* @crc: Pointer of the CRC information +*/ +void mtk_crtc_start_crc_cmdq (struct mtk_crtc_crc *crc) +{ +if (!crc->cmdq_client.chan) +return ; + +dma_sync_single_for_device (crc->cmdq_client.chan->mbox->dev, + crc->cmdq_handle.pa_base, + crc->cmdq_handle.cmd_buf_size, +DMA_TO_DEVICE ); +mbox_send_message (crc->cmdq_client.chan, &crc->cmdq_handle); +mbox_client_txdone (crc->cmdq_client.chan,0 ); +} + +/** +* mtk_crtc_stop_crc_cmdq - Stop the GCE looping thread for CRC update +* @crc: Pointer of the CRC information +*/ +void mtk_crtc_stop_crc_cmdq (struct mtk_crtc_crc *crc) +{ +if (!crc->cmdq_client.chan) +return ; + +/* remove all the commands from the cmdq packet */ +mbox_flush (crc->cmdq_client.chan,2000 ); +} +#endif
drivers/gpu/drm/mediatek/mtk_crtc.h +38 -0
@@ -14,6 +14,34 @@#define MTK_MAX_BPC 10#define MTK_MIN_BPC 3 +/** +* struct mtk_crtc_crc - crc related information +* @ofs: register offset of crc +* @rst_ofs: register offset of crc reset +* @rst_msk: register mask of crc reset +* @cnt: count of crc +* @va: pointer to the start of crc array +* @pa: physical address of the crc for gce to access +* @cmdq_event: the event to trigger the cmdq +* @cmdq_reg: address of the register that cmdq is going to access +* @cmdq_client: handler to control cmdq (mbox channel, thread ...etc.) +* @cmdq_handle: cmdq packet to store the commands +*/ +struct mtk_crtc_crc { +const u32 *ofs; +u32 rst_ofs; +u32 rst_msk; +size_t cnt; +u32 *va; +#if IS_REACHABLE (CONFIG_MTK_CMDQ ) +dma_addr_t pa; +u32 cmdq_event; +struct cmdq_client_reg *cmdq_reg; +struct cmdq_client cmdq_client; +struct cmdq_pkt cmdq_handle; +#endif +}; +void mtk_crtc_commit (struct drm_crtc *crtc); int mtk_crtc_create(struct drm_device *drm_dev, const unsigned int *path, unsigned int path_len, int priv_data_index,
@@ -25,4 +53,14 @@ void mtk_crtc_async_update(struct drm_crtc *crtc, struct drm_plane *plane, struct drm_atomic_state *plane_state);struct device *mtk_crtc_dma_dev_get (struct drm_crtc *crtc); +void mtk_crtc_init_crc (struct mtk_crtc_crc *crc,const u32 *crc_offset_table, +size_t crc_count,u32 reset_offset,u32 reset_mask); +void mtk_crtc_read_crc (struct mtk_crtc_crc *crc,void __iomem *reg); +void mtk_crtc_destroy_crc (struct mtk_crtc_crc *crc); +#if IS_REACHABLE (CONFIG_MTK_CMDQ ) +void mtk_crtc_create_crc_cmdq (struct device *dev,struct mtk_crtc_crc *crc); +void mtk_crtc_start_crc_cmdq (struct mtk_crtc_crc *crc); +void mtk_crtc_stop_crc_cmdq (struct mtk_crtc_crc *crc); +#endif +#endif /* MTK_CRTC_H */
drivers/gpu/drm/mediatek/mtk_ddp_comp.h +3 -0
@@ -88,6 +88,9 @@ struct mtk_ddp_comp_funcs {void (*remove)(struct device *dev,struct mtk_mutex *mutex);unsigned int (*encoder_index)(struct device *dev);enum drm_mode_status (*mode_valid)(struct device *dev,const struct drm_display_mode *mode); +size_t (*crc_cnt)(struct device *dev); +u32 *(*crc_entry)(struct device *dev); +void (*crc_read)(struct device *dev); };struct mtk_ddp_comp {
Signature · 1 line
2.18.0
Re: [PATCH v6 12/14] drm/mediatek: Support CRC in display driver
Hi, Shawn:
Quoted 47 lines · Shawn Sung
From: Hsiao Chien Sung <[email protected]>
Register CRC related function pointers to support
CRC retrieval.Signed-off-by Hsiao Chien Sung <[email protected]>--- drivers/gpu/drm/mediatek/mtk_crtc.c | 260 ++++++++++++++++++++++++ drivers/gpu/drm/mediatek/mtk_crtc.h | 38 ++++ drivers/gpu/drm/mediatek/mtk_ddp_comp.h | 3 + 3 files changed, 301 insertions(+)drivers/gpu/drm/mediatek/mtk_crtc.c +10
-0@@ -18,6 +18,7 @@#include <drm/drm_atomic_helper.h> #include <drm/drm_probe_helper.h> #include <drm/drm_vblank.h> +#include <drm/drm_vblank_work.h> #include "mtk_crtc.h" #include "mtk_ddp_comp.h" @@ -69,6 +70,9 @@ struct mtk_crtc {/* lock for display hardware access */ struct mutex hw_lock;bool config_updating; + +struct mtk_ddp_comp *crc_provider; +struct drm_vblank_work crc_work; };struct mtk_crtc_state {@@ -703,6 +707,71 @@ static void mtk_crtc_update_output(struct drm_crtc *crtc, } } +static void mtk_crtc_crc_work (struct kthread_work *base) +{ +struct drm_vblank_work *work =to_drm_vblank_work (base); +struct mtk_crtc *mtk_crtc = +container_of (work,typeof (*mtk_crtc), crc_work); +
drivers/gpu/drm/mediatek/mtk_crtc.c static void mtk_crtc_update_output(struct · line 726
Quoted 10 lines
drivers/gpu/drm/mediatek/mtk_crtc.c +9
-0+if (mtk_crtc->base.crc.opened) { +struct mtk_ddp_comp *comp = mtk_crtc->crc_provider; +u64 vblank =drm_crtc_vblank_count (&mtk_crtc->base); + + comp->funcs->crc_read (comp->dev); + +/* could take more than 50ms to finish */ +drm_crtc_add_crc_entry (&mtk_crtc->base, true, vblank, + comp->funcs->crc_entry (comp- >dev));
It seems that you could regenerate cmdq packet for crc here. So crtc atomic flush and crc could use the same mailbox channel.
Regards,
CK
Quoted 382 lines
drivers/gpu/drm/mediatek/mtk_crtc.c +6
-0+ +drm_vblank_work_schedule (&mtk_crtc->crc_work, vblank +1 , true); + } +} + +static int mtk_crtc_set_crc_source(struct drm_crtc *crtc, const char*src)
drivers/gpu/drm/mediatek/mtk_crtc.c +14
-0+{ +struct mtk_crtc *mtk_crtc =to_mtk_crtc (crtc); + +if (!src) +return -EINVAL ; + +if (strcmp (src,"auto" ) !=0 ) { +DRM_ERROR ("%s(crtc-%d): unknown source '%s'\n" , + __func__,drm_crtc_index (crtc), src); +return -EINVAL ; + } + +/* +* skip the first crc because the first frame (vblank + 1) is configured
drivers/gpu/drm/mediatek/mtk_crtc.c +4
-0+* by mtk_crtc_ddp_hw_init() when atomic enable +*/ + drm_vblank_work_schedule(&mtk_crtc->crc_work, + drm_crtc_vblank_count(crtc) + 2,false);
drivers/gpu/drm/mediatek/mtk_crtc.c +4
-0+return 0 ; +} + +static int mtk_crtc_verify_crc_source(struct drm_crtc *crtc, constchar *src,
drivers/gpu/drm/mediatek/mtk_crtc.c +22
-0+ size_t *cnt) +{ +struct mtk_crtc *mtk_crtc =to_mtk_crtc (crtc); +struct mtk_ddp_comp *comp = mtk_crtc->crc_provider; + +if (!comp) { +DRM_ERROR ("%s(crtc-%d): no crc provider\n" , + __func__,drm_crtc_index (crtc)); +return -ENOENT ; + } + +if (src &&strcmp (src,"auto" ) !=0 ) { +DRM_ERROR ("%s(crtc-%d): unknown source '%s'\n" , + __func__,drm_crtc_index (crtc), src); +return -EINVAL ; + } + + *cnt = comp->funcs->crc_cnt (comp->dev); + +return 0 ; +} + int mtk_crtc_plane_check(struct drm_crtc *crtc, struct drm_plane*plane,
drivers/gpu/drm/mediatek/mtk_crtc.c +2
-0struct mtk_plane_state *state) {@@ -751,6 +820,8 @@ static void mtk_crtc_atomic_enable(structdrm_crtc *crtc,drm_crtc_vblank_on (crtc ); mtk_crtc->enabled = true; + +drm_vblank_work_init (&mtk_crtc->crc_work, crtc, mtk_crtc_crc_work); }static void mtk_crtc_atomic_disable(struct
drm_crtc*crtc,drivers/gpu/drm/mediatek/mtk_crtc.c +2
-0@@ -840,6 +911,8 @@ static const struct drm_crtc_funcs mtk_crtc_funcs = { .atomic_destroy_state = mtk_crtc_destroy_state, .enable_vblank = mtk_crtc_enable_vblank, .disable_vblank = mtk_crtc_disable_vblank, + .set_crc_source = mtk_crtc_set_crc_source, + .verify_crc_source = mtk_crtc_verify_crc_source, };static const struct
drm_crtc_helper_funcsmtk_crtc_helper_funcs= {drivers/gpu/drm/mediatek/mtk_crtc.c +5
-0@@ -1033,6 +1106,11 @@ int mtk_crtc_create(struct drm_device *drm_dev, const unsigned int *path, if (comp->funcs->ctm_set) has_ctm = true; + +if (comp->funcs->crc_cnt && + comp->funcs->crc_entry && + comp->funcs->crc_read) + mtk_crtc->crc_provider = comp; }drivers/gpu/drm/mediatek/mtk_crtc.c +2
-0mtk_ddp_comp_register_vblank_cb(comp, mtk_crtc_ddp_irq,@@ -1136,3 +1214,185 @@ int mtk_crtc_create(struct drm_device *drm_dev, const unsigned int *path, return 0; } + +void mtk_crtc_init_crc(struct mtk_crtc_crc *crc, const u32
*crc_offset_table,drivers/gpu/drm/mediatek/mtk_crtc.c +1
-0+ size_t crc_count, u32 reset_offset, u32
reset_mask)drivers/gpu/drm/mediatek/mtk_crtc.c +51
-0+{ + crc->ofs = crc_offset_table; + crc->cnt = crc_count; + crc->rst_ofs = reset_offset; + crc->rst_msk = reset_mask; + crc->va =kcalloc (crc->cnt,sizeof (*crc->va),GFP_KERNEL ); +if (!crc->va) { +DRM_ERROR ("failed to allocate memory for crc\n" ); + crc->cnt =0 ; + } +} + +void mtk_crtc_read_crc (struct mtk_crtc_crc *crc,void __iomem *reg) +{ +if (!crc->cnt || !crc->ofs || !crc->va) +return ; + +#if IS_REACHABLE (CONFIG_MTK_CMDQ ) +/* sync to see the most up-to-date copy of the DMA buffer */ +dma_sync_single_for_cpu (crc->cmdq_client.chan->mbox->dev, + crc->pa, crc->cnt *sizeof (*crc->va), +DMA_FROM_DEVICE ); +#endif +} + +void mtk_crtc_destroy_crc (struct mtk_crtc_crc *crc) +{ +if (!crc->cnt) +return ; + +#if IS_REACHABLE (CONFIG_MTK_CMDQ ) +if (crc->pa) { +dma_unmap_single (crc->cmdq_client.chan->mbox->dev, + crc->pa, crc->cnt *sizeof (*crc->va), +DMA_TO_DEVICE ); + crc->pa =0 ; + } +if (crc->cmdq_client.chan) { +mtk_drm_cmdq_pkt_destroy (&crc->cmdq_handle); +mbox_free_channel (crc->cmdq_client.chan); + crc->cmdq_client.chan =NULL ; + } +#endif +kfree (crc->va); + crc->va =NULL ; + crc->cnt =0 ; +} + +#if IS_REACHABLE (CONFIG_MTK_CMDQ ) +/** +* mtk_crtc_create_crc_cmdq - Create a CMDQ thread for syncing the CRCs
+ * @dev: Kernel device node of the CRC provider
+ * @crc: Pointer of the CRC to init
+ *
+ * This function will create a looping thread on GCE (Global Command Engine) to
+ * keep the CRC up to date by monitoring the assigned event (usually the frame
+ * done event) of the CRC provider, and read the CRCs from the registers to a
+ * shared memory for the workqueue to read. To start/stop the looping thread,
+ * please callmtk_crtc_start_crc_cmdq()andmtk_crtc_stop_crc_cmdq()
+ * defined blow.
+ *
+ * The reason why we don't update the CRCs with CPU is that the front porch of
+ * 4K60 timing in CEA-861 is less than 60us, and register read/write speed is
+ * relatively unreliable comparing to GCE due to the bus design.
+ *
+ * We must create a new thread instead of using the original one for plane
+ * update is because:
+ * 1. We cannot add another wait-for-event command at the end of cmdq packet, or
+ * the cmdq callback will delay for too long
+ * 2. Will get the CRC of the previous frame if using the existed wait-for-event
+ * command which is at the beginning of the packet
+ */
+voidmtk_crtc_create_crc_cmdq(struct device *dev, struct mtk_crtc_crc *crc)drivers/gpu/drm/mediatek/mtk_crtc.c +18
-0+{ +int i; + +if (!crc->cnt) { +dev_warn (dev,"%s: not support\n" , __func__); + goto cleanup; + } + +if (!crc->ofs) { +dev_warn (dev,"%s: not defined\n" , __func__); + goto cleanup; + } + + crc->cmdq_client.client.dev = dev; + crc->cmdq_client.client.tx_block = false; + crc->cmdq_client.client.knows_txdone = true; + crc->cmdq_client.client.rx_callback =NULL ; + crc->cmdq_client.chan = mbox_request_channel(&crc-Quoted 1 line
cmdq_client.client, 0);
drivers/gpu/drm/mediatek/mtk_crtc.c +2
-0+if (IS_ERR (crc->cmdq_client.chan)) { + dev_warn(dev, "%s: failed to create mailbox client\n",
__func__);drivers/gpu/drm/mediatek/mtk_crtc.c +5
-0+ crc->cmdq_client.chan =NULL ; + goto cleanup; + } + + if (mtk_drm_cmdq_pkt_create(&crc->cmdq_client, &crc-Quoted 1 line
cmdq_handle,PAGE_SIZE)) {drivers/gpu/drm/mediatek/mtk_crtc.c +1
-0+ dev_warn(dev, "%s: failed to create cmdq packet\n",
__func__);drivers/gpu/drm/mediatek/mtk_crtc.c +9
-0+ goto cleanup; + } + +if (!crc->va) { +dev_warn (dev,"%s: no memory\n" , __func__); + goto cleanup; + } + +/* map the entry to get a dma address for cmdq to store the crc */
drivers/gpu/drm/mediatek/mtk_crtc.c +5
-0+ crc->pa =dma_map_single (crc->cmdq_client.chan->mbox->dev, + crc->va, crc->cnt *sizeof (*crc->va), +DMA_FROM_DEVICE ); + + if (dma_mapping_error(crc->cmdq_client.chan->mbox->dev, crc-Quoted 1 line
pa)) {
drivers/gpu/drm/mediatek/mtk_crtc.c +10
-0+dev_err (dev,"%s: failed to map dma\n" , __func__); + goto cleanup; + } + +if (crc->cmdq_event) +cmdq_pkt_wfe (&crc->cmdq_handle, crc->cmdq_event, true); + +for (i =0 ; i < crc->cnt; i++) { +/* put crc to spr1 register */ + cmdq_pkt_read_s(&crc->cmdq_handle, crc->cmdq_reg-Quoted 1 line
subsys,
drivers/gpu/drm/mediatek/mtk_crtc.c +6
-0+ crc->cmdq_reg->offset + crc->ofs[i], + CMDQ_THR_SPR_IDX1); + +/* copy spr1 register to physical address of the crc */ + cmdq_pkt_assign(&crc->cmdq_handle, CMDQ_THR_SPR_IDX0, + CMDQ_ADDR_HIGH(crc->pa + i *
sizeof(*crc->va)));drivers/gpu/drm/mediatek/mtk_crtc.c +2
-0+ cmdq_pkt_write_s(&crc->cmdq_handle, CMDQ_THR_SPR_IDX0, + CMDQ_ADDR_LOW(crc->pa + i *
sizeof(*crc->va)),drivers/gpu/drm/mediatek/mtk_crtc.c +20
-0+ CMDQ_THR_SPR_IDX1); + } +/* reset crc */ +mtk_ddp_write_mask (&crc->cmdq_handle, ~0 , crc->cmdq_reg,0 , + crc->rst_ofs, crc->rst_msk); + +/* clear reset bit */ +mtk_ddp_write_mask (&crc->cmdq_handle,0 , crc->cmdq_reg,0 , + crc->rst_ofs, crc->rst_msk); + +/* jump to head of the cmdq packet */ +cmdq_pkt_jump (&crc->cmdq_handle, crc->cmdq_handle.pa_base); + +return ; +cleanup: +mtk_crtc_destroy_crc (crc); +} + +/** +* mtk_crtc_start_crc_cmdq - Start the GCE looping thread for CRC update
+ * @crc: Pointer of the CRC information
+ */drivers/gpu/drm/mediatek/mtk_crtc.c +15
-0+void mtk_crtc_start_crc_cmdq (struct mtk_crtc_crc *crc) +{ +if (!crc->cmdq_client.chan) +return ; + +dma_sync_single_for_device (crc->cmdq_client.chan->mbox->dev, + crc->cmdq_handle.pa_base, + crc->cmdq_handle.cmd_buf_size, +DMA_TO_DEVICE ); +mbox_send_message (crc->cmdq_client.chan, &crc->cmdq_handle); +mbox_client_txdone (crc->cmdq_client.chan,0 ); +} + +/** +* mtk_crtc_stop_crc_cmdq - Stop the GCE looping thread for CRC update
+ * @crc: Pointer of the CRC information
+ */drivers/gpu/drm/mediatek/mtk_crtc.c +9
-0+void mtk_crtc_stop_crc_cmdq (struct mtk_crtc_crc *crc) +{ +if (!crc->cmdq_client.chan) +return ; + +/* remove all the commands from the cmdq packet */ +mbox_flush (crc->cmdq_client.chan,2000 ); +} +#endif drivers/gpu/drm/mediatek/mtk_crtc.h +28
-0@@ -14,6 +14,34 @@#define MTK_MAX_BPC 10#define MTK_MIN_BPC 3 +/** +* struct mtk_crtc_crc - crc related information +* @ofs: register offset of crc +* @rst_ofs: register offset of crc reset +* @rst_msk: register mask of crc reset +* @cnt: count of crc +* @va: pointer to the start of crc array +* @pa: physical address of the crc for gce to access +* @cmdq_event: the event to trigger the cmdq +* @cmdq_reg: address of the register that cmdq is going to access +* @cmdq_client: handler to control cmdq (mbox channel, thread ...etc.) +* @cmdq_handle: cmdq packet to store the commands +*/ +struct mtk_crtc_crc { +const u32 *ofs; +u32 rst_ofs; +u32 rst_msk; +size_t cnt; +u32 *va; +#if IS_REACHABLE (CONFIG_MTK_CMDQ ) +dma_addr_t pa; +u32 cmdq_event; +struct cmdq_client_reg *cmdq_reg; +struct cmdq_client cmdq_client; +struct cmdq_pkt cmdq_handle; +#endif +}; +void mtk_crtc_commit (struct drm_crtc *crtc); int mtk_crtc_create(struct drm_device *drm_dev, const unsigned int*path,
drivers/gpu/drm/mediatek/mtk_crtc.h +1
-0unsigned int path_len, int priv_data_index,@@ -25,4 +53,14 @@ void mtk_crtc_async_update(struct drm_crtc *crtc,struct drm_plane *plane, struct drm_atomic_state *plane_state);struct device *mtk_crtc_dma_dev_get (struct drm_crtc *crtc); +void mtk_crtc_init_crc(struct mtk_crtc_crc *crc, const u32
*crc_offset_table,drivers/gpu/drm/mediatek/mtk_crtc.h +1
-0+ size_t crc_count, u32 reset_offset, u32
reset_mask);drivers/gpu/drm/mediatek/mtk_crtc.h +4
-0+void mtk_crtc_read_crc (struct mtk_crtc_crc *crc,void __iomem *reg); +void mtk_crtc_destroy_crc (struct mtk_crtc_crc *crc); +#if IS_REACHABLE (CONFIG_MTK_CMDQ ) +void mtk_crtc_create_crc_cmdq(struct device *dev, struct
mtk_crtc_crc*crc);drivers/gpu/drm/mediatek/mtk_crtc.h +4
-0+void mtk_crtc_start_crc_cmdq (struct mtk_crtc_crc *crc); +void mtk_crtc_stop_crc_cmdq (struct mtk_crtc_crc *crc); +#endif +#endif /* MTK_CRTC_H */ drivers/gpu/drm/mediatek/mtk_ddp_comp.h +3
-0@@ -88,6 +88,9 @@ struct mtk_ddp_comp_funcs {void (*remove)(struct device *dev,struct mtk_mutex *mutex);unsigned int (*encoder_index)(struct device *dev);enum drm_mode_status (*mode_valid)(struct device *dev,const struct drm_display_mode *mode); +size_t (*crc_cnt)(struct device *dev); +u32 *(*crc_entry)(struct device *dev); +void (*crc_read)(struct device *dev); };struct
mtk_ddp_comp{
PATCH v6 13/14 drm/mediatek: Support CRC in OVL
In reply to Shawn SungFrom: Hsiao Chien Sung <[email protected]>
We choose OVL as the CRC generator from other hardware components that are also capable of calculating CRCs, since its frame done event triggers vblanks, it can be used as a signal to know when is safe to retrieve CRC of the frame.
Please note that position of the hardware component that is chosen as CRC generator in the display path is significant. For example, while OVL is the first module in VDOSYS0, its CRC won't be affected by the modules after it, which means effects applied by PQ, Gamma, Dither or any other components after OVL won't be calculated in CRC generation.
--- drivers/gpu/drm/mediatek/mtk_ddp_comp.c | 3 + drivers/gpu/drm/mediatek/mtk_disp_drv.h | 3 + drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 198 ++++++++++++++++++++++-- 3 files changed, 194 insertions(+), 10 deletions(-)
drivers/gpu/drm/mediatek/mtk_ddp_comp.c +3 -0
@@ -351,6 +351,9 @@ static const struct mtk_ddp_comp_funcs ddp_ovl = { .clk_enable = mtk_ovl_clk_enable, .clk_disable = mtk_ovl_clk_disable, .config = mtk_ovl_config, + .crc_cnt = mtk_ovl_crc_cnt, + .crc_entry = mtk_ovl_crc_entry, + .crc_read = mtk_ovl_crc_read, .start = mtk_ovl_start, .stop = mtk_ovl_stop, .register_vblank_cb = mtk_ovl_register_vblank_cb,
drivers/gpu/drm/mediatek/mtk_disp_drv.h +3 -0
@@ -105,6 +105,9 @@ void mtk_ovl_enable_vblank(struct device *dev);void mtk_ovl_disable_vblank (struct device *dev);const u32 *mtk_ovl_get_formats (struct device *dev);size_t mtk_ovl_get_num_formats (struct device *dev); +size_t mtk_ovl_crc_cnt (struct device *dev); +u32 *mtk_ovl_crc_entry (struct device *dev); +void mtk_ovl_crc_read (struct device *dev);void mtk_ovl_adaptor_add_comp (struct device *dev,struct mtk_mutex *mutex);void mtk_ovl_adaptor_remove_comp (struct device *dev,struct mtk_mutex *mutex);
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +188 -10
299 lines not on this page · raw message
Signature · 1 line
2.18.0
Re: [PATCH v6 13/14] drm/mediatek: Support CRC in OVL
Hi, Shawn:
Quoted 278 lines · Shawn Sung
From: Hsiao Chien Sung <[email protected]>
We choose OVL as the CRC generator from other hardware components that are also capable of calculating CRCs, since its frame done event triggers vblanks, it can be used as a signal to know when is safe to retrieve CRC of the frame.
Please note that position of the hardware component that is chosen as CRC generator in the display path is significant. For example, while OVL is the first module in VDOSYS0, its CRC won't be affected by the modules after it, which means effects applied by PQ, Gamma, Dither or any other components after OVL won't be calculated in CRC generation.
Signed-off-by Hsiao Chien Sung <[email protected]>--- drivers/gpu/drm/mediatek/mtk_ddp_comp.c | 3 + drivers/gpu/drm/mediatek/mtk_disp_drv.h | 3 + drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 198 ++++++++++++++++++++++-- 3 files changed, 194 insertions(+), 10 deletions(-)drivers/gpu/drm/mediatek/mtk_ddp_comp.c +3
-0@@ -351,6 +351,9 @@ static const struct mtk_ddp_comp_funcs ddp_ovl = { .clk_enable = mtk_ovl_clk_enable, .clk_disable = mtk_ovl_clk_disable, .config = mtk_ovl_config, + .crc_cnt = mtk_ovl_crc_cnt, + .crc_entry = mtk_ovl_crc_entry, + .crc_read = mtk_ovl_crc_read, .start = mtk_ovl_start, .stop = mtk_ovl_stop,drivers/gpu/drm/mediatek/mtk_ddp_comp.c +0
-0.register_vblank_cb = mtk_ovl_register_vblank_cb,drivers/gpu/drm/mediatek/mtk_disp_drv.h +3
-0@@ -105,6 +105,9 @@ void mtk_ovl_enable_vblank(struct device *dev);void mtk_ovl_disable_vblank (struct device *dev);const u32 *mtk_ovl_get_formats (struct device *dev);size_t mtk_ovl_get_num_formats (struct device *dev); +size_t mtk_ovl_crc_cnt (struct device *dev); +u32 *mtk_ovl_crc_entry (struct device *dev); +void mtk_ovl_crc_read (struct device *dev);void mtk_ovl_adaptor_add_comp (struct device *dev,struct mtk_mutex *mutex);void mtk_ovl_adaptor_remove_comp(struct device *dev, struct
mtk_mutex*mutex);drivers/gpu/drm/mediatek/mtk_disp_ovl.c +18
-0@@ -24,12 +24,20 @@#define OVL_FME_CPL_INT BIT(1)#define DISP_REG_OVL_INTSTA 0x0008#define DISP_REG_OVL_EN 0x000c +#define OVL_EN BIT(0) +#define OVL_OP_8BIT_MODE BIT(4) +#define OVL_HG_FOVL_CK_ON BIT(8) +#define OVL_HF_FOVL_CK_ON BIT(10) +#define DISP_REG_OVL_TRIG 0x0010 +#define OVL_CRC_EN BIT(8) +#define OVL_CRC_CLR BIT(9)#define DISP_REG_OVL_RST 0x0014#define DISP_REG_OVL_ROI_SIZE 0x0020#define DISP_REG_OVL_DATAPATH_CON 0x0024#define OVL_LAYER_SMI_ID_EN BIT(0)#define OVL_BGCLR_SEL_IN BIT(2)#define OVL_LAYER_AFBC_EN (n) BIT(4+n) +#define OVL_OUTPUT_CLAMP BIT(26)#define DISP_REG_OVL_ROI_BGCLR 0x0028#define DISP_REG_OVL_SRC_CON 0x002c#define DISP_REG_OVL_CON (n) (0x0030 + 0x20 * (n))@@ -42,7 +50,26 @@#define DISP_REG_OVL_RDMA_CTRL (n) (0x00c0 + 0x20 * (n))#define DISP_REG_OVL_RDMA_GMC (n) (0x00c8 + 0x20 * (n))#define DISP_REG_OVL_ADDR_MT2701 0x0040 +#define DISP_REG_OVL_CRC 0x0270 +#define OVL_CRC_OUT_MASK GENMASK(30, 0)#define DISP_REG_OVL_CLRFMT_EXT 0x02D0 +#define DISP_REG_OVL_CLRFMT_EXT1 0x02D8 +#define OVL_CLRFMT_EXT1_CSC_EN (n) (1 << (((n) * 4) + 1)) +#define DISP_REG_OVL_Y2R_PARA_R0 (n) (0x0134 + 0x28 * (n)) +#define OVL_Y2R_PARA_C_CF_RMY (GENMAS K(14, 0)) +#define DISP_REG_OVL_Y2R_PARA_G0 (n) (0x013c + 0x28 * (n)) +#define OVL_Y2R_PARA_C_CF_GMU (GENMAS K(30, 16)) +#define DISP_REG_OVL_Y2R_PARA_B1 (n) (0x0148 + 0x28 * (n)) +#define OVL_Y2R_PARA_C_CF_BMV (GENMAS
K(14, 0))drivers/gpu/drm/mediatek/mtk_disp_ovl.c +2
-0+#define DISP_REG_OVL_Y2R_PARA_YUV_A_0 (n) (0x014c + 0x28 * (n)) +#define OVL_Y2R_PARA_C_CF_YA (GENMASK(10,0))
+#defineOVL_Y2R_PARA_C_CF_UA(GENMASK(26,
16))drivers/gpu/drm/mediatek/mtk_disp_ovl.c +2
-0+#define DISP_REG_OVL_Y2R_PARA_YUV_A_1 (n) (0x0150 + 0x28 * (n)) +#define OVL_Y2R_PARA_C_CF_VA (GENMASK(10,0))
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +2
-0+#define DISP_REG_OVL_Y2R_PRE_ADD2 (n) (0x0154 + 0x28 * (n)) +#define DISP_REG_OVL_R2R_R0 (n) (0x0500 + 0x40* (n))
+#defineDISP_REG_OVL_R2R_G1(n)(0x0510+0x40
* (n))
+#defineDISP_REG_OVL_R2R_B2(n)(0x0520+0x40
* (n))
#defineDISP_REG_OVL_ADDR_MT81730x0f40
#defineDISP_REG_OVL_ADDR(ovl, n)((ovl)->data->addr +0x20* (n))
#defineDISP_REG_OVL_HDR_ADDR(ovl, n)((ovl)->data-Quoted 1 line
addr +
0x20* (n) +0x04)drivers/gpu/drm/mediatek/mtk_disp_ovl.c +3
-0@@ -55,6 +82,8 @@#define OVL_CON_CLRFMT_MAN BIT(23)#define OVL_CON_BYTE_SWAP BIT(24)#define OVL_CON_RGB_SWAP BIT(25) +#define OVL_CON_MTX_AUTO_DIS BIT(26) +#define OVL_CON_MTX_EN BIT(27)#define OVL_CON_CLRFMT_RGB (1 << 12)#define OVL_CON_CLRFMT_RGBA8888 (2 << 12)#define OVL_CON_CLRFMT_ARGB8888 (3 << 12)@@ -62,6 +91,7 @@#define OVL_CON_CLRFMT_YUYV (5 << 12)#define OVL_CON_MTX_YUV_TO_RGB (6 << 16)#define OVL_CON_CLRFMT_PARGB8888 (OVL_CON_CLRFMT_ARGB8888 | OVL_CON_CLRFMT_MAN) +#define OVL_CON_MTX_PROGRAMMABLE (8 << 16)#define OVL_CON_CLRFMT_RGB565 (ovl) ((ovl)->data->fmt_rgb565_is_0 ? \0 :
OVL_CON_CLRFMT_RGB)
#defineOVL_CON_CLRFMT_RGB888(ovl)((ovl)->data->fmt_rgb565_is_0 ?
\drivers/gpu/drm/mediatek/mtk_disp_ovl.c +57
-6@@ -131,6 +161,10 @@ static const u32 mt8195_formats[] = { DRM_FORMAT_YUYV, }; +static const u32 mt8195_ovl_crc_ofs[] = { +DISP_REG_OVL_CRC , +}; +struct mtk_disp_ovl_data {unsigned int addr;unsigned int gmc_bits;@@ -141,12 +175,15 @@ struct mtk_disp_ovl_data {const u32 *formats;size_t num_formats;bool supports_clrfmt_ext; +const u32 *crc_ofs; +size_t crc_cnt; };/* * struct mtk_disp_ovl - DISP_OVL driver structure * @crtc: associated crtc to report vblank events to * @data: platform data +* @crc: crc related information */ struct mtk_disp_ovl {struct drm_crtc *crtc;@@ -156,8 +193,31 @@ struct mtk_disp_ovl {const struct mtk_disp_ovl_data *data;void (*vblank_cb)(void *data);void *vblank_cb_data; +resource_size_t regs_pa; +struct mtk_crtc_crc crc; }; +size_t mtk_ovl_crc_cnt (struct device *dev) +{ +struct mtk_disp_ovl *ovl =dev_get_drvdata (dev); + +return ovl->crc.cnt; +} + +u32 *mtk_ovl_crc_entry (struct device *dev) +{ +struct mtk_disp_ovl *ovl =dev_get_drvdata (dev); + +return ovl->crc.va; +} + +void mtk_ovl_crc_read (struct device *dev) +{ +struct mtk_disp_ovl *ovl =dev_get_drvdata (dev); + +mtk_crtc_read_crc (&ovl->crc, ovl->regs); +} +static irqreturn_t mtk_disp_ovl_irq_handler (int irq,void *dev_id) {struct mtk_disp_ovl *priv = dev_id;@@ -237,21 +297,40 @@ void mtk_ovl_clk_disable(struct device *dev)void mtk_ovl_start (struct device *dev) {struct mtk_disp_ovl *ovl =dev_get_drvdata (dev); +unsigned int reg =readl (ovl->regs +DISP_REG_OVL_DATAPATH_CON ); -if (ovl->data->smi_id_en) { -unsigned int reg; +if (ovl->data->smi_id_en) + reg |=OVL_LAYER_SMI_ID_EN ; - reg =readl (ovl->regs +DISP_REG_OVL_DATAPATH_CON ); - reg = reg |OVL_LAYER_SMI_ID_EN ; -writel_relaxed (reg, ovl->regs + DISP_REG_OVL_DATAPATH_CON); +/* +* When doing Y2R conversion, it's common to get an output +* that is larger than 10 bits (negative numbers). +* Enable this bit to clamp the output to 10 bits per channel +* (should always be enabled) +*/ + reg |=OVL_OUTPUT_CLAMP ; +writel_relaxed (reg, ovl->regs +DISP_REG_OVL_DATAPATH_CON ); + + reg =OVL_EN ; +if (ovl->data->crc_cnt) { +/* enable crc and its related clocks */ +writel_relaxed (OVL_CRC_EN , ovl->regs +DISP_REG_OVL_TRIG ); + reg |=OVL_OP_8BIT_MODE |OVL_HG_FOVL_CK_ON |OVL_HF_FOVL_CK_ON ; } -writel_relaxed (0x1 , ovl->regs +DISP_REG_OVL_EN ); +writel_relaxed (reg, ovl->regs +DISP_REG_OVL_EN ); + +#if IS_REACHABLE (CONFIG_MTK_CMDQ ) +mtk_crtc_start_crc_cmdq (&ovl->crc); +#endif }void mtk_ovl_stop (struct device *dev) {struct mtk_disp_ovl *ovl =dev_get_drvdata (dev); +#if IS_REACHABLE (CONFIG_MTK_CMDQ ) +mtk_crtc_stop_crc_cmdq (&ovl->crc); +#endif writel_relaxed (0x0 , ovl->regs +DISP_REG_OVL_EN );if (ovl->data->smi_id_en) {unsigned int reg;@@ -488,6 +567,83 @@ void mtk_ovl_layer_config(struct device *dev,unsigned int idx, (state->base.fb && !state->base.fb->format->has_alpha)) ignore_pixel_alpha = OVL_CONST_BLEND; +/* +* OVL only supports 8 bits data in CRC calculation, transform 10-bit
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +1
-0+* RGB to 8-bit RGB by leveraging the ability of the Y2R (YUV- to-RGB)
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +1
-0+* hardware to multiply coefficients, although there is nothing to do
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +4
-0+* with the YUV format. +*/ +if (ovl->data->supports_clrfmt_ext) { +u32 y2r_coef =0 , y2r_offset =0 , r2r_coef =0 , csc_en= 0;
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +3
-0+ +if (is_10bit_rgb (fmt)) { + con |= OVL_CON_MTX_AUTO_DIS | OVL_CON_MTX_EN |
OVL_CON_MTX_PROGRAMMABLE;drivers/gpu/drm/mediatek/mtk_disp_ovl.c +4
-0+ +/* +* Y2R coefficient setting +* bit 13 is 2^1, bit 12 is 2^0, bit 11 is 2^- 1,
drivers/gpu/drm/mediatek/mtk_disp_ovl.c void mtk_ovl_layer_config(struct device *dev, unsigned int idx, · line 590
Quoted 6 lines
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +6
-0+* bit 10 is 2^-2 = 0.25 +*/ + y2r_coef =BIT (10 ); + +/* -1 in 10bit */ + y2r_offset =GENMASK (10 ,0 ) -1 ;
I don't know why do this? If an input value is 0x100, then
0x100 right shit 2 bit become 0x40.0x40 - 1 = 0x3f.0x3f left shift 2 bit become 0xfc.
So input 0x100 and output 0xfc. Why?
Quoted 20 lines
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +4
-0+ +/* +* R2R coefficient setting +* bit 19 is 2^1, bit 18 is 2^0, bit 17 is 2^- 1,
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +9
-0+* bit 20 is 2^2 = 4 +*/ + r2r_coef =BIT (20 ); + +/* CSC_EN is for R2R */ + csc_en =OVL_CLRFMT_EXT1_CSC_EN (idx); + +/* +* 1. YUV input data - 1 and shift right for 2 bits to remove it
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +5
-0+* [R'] [0.25 0 0] [Y in - 1] +* [G'] = [ 0 0.25 0] * [U in - 1] +* [B'] [ 0 0 0.25] [V in - 1] +* +* 2. shift left for 2 bit letting the last 2
Quoted 1 line
bits become 0
You truncate the last two bit, so some quality lost. I think the quality is main function and CRC is just for debug. So it's better that in normal case we keep quality and only for debug to lost the quality.
I have another question. You just truncate the last two bit but it is still 10 bit value, so CRC could calculate this 10 bit value? I don't know why you say CRC just for 8 bit?
Regards,
CK
Quoted 114 lines
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +8
-0+* [R out] [ 4 0 0] [R'] +* [G out] = [ 0 4 0] * [G'] +* [B out] [ 0 0 4] [B'] +*/ + } + + mtk_ddp_write_mask(cmdq_pkt, y2r_coef, + &ovl->cmdq_reg, ovl->regs,
DISP_REG_OVL_Y2R_PARA_R0(idx),drivers/gpu/drm/mediatek/mtk_disp_ovl.c +3
-0+ OVL_Y2R_PARA_C_CF_RMY); + mtk_ddp_write_mask(cmdq_pkt, (y2r_coef << 16), + &ovl->cmdq_reg, ovl->regs,
DISP_REG_OVL_Y2R_PARA_G0(idx),drivers/gpu/drm/mediatek/mtk_disp_ovl.c +3
-0+ OVL_Y2R_PARA_C_CF_GMU); + mtk_ddp_write_mask(cmdq_pkt, y2r_coef, + &ovl->cmdq_reg, ovl->regs,
DISP_REG_OVL_Y2R_PARA_B1(idx),drivers/gpu/drm/mediatek/mtk_disp_ovl.c +4
-0+ OVL_Y2R_PARA_C_CF_BMV); + + mtk_ddp_write_mask(cmdq_pkt, y2r_offset, + &ovl->cmdq_reg, ovl->regs,
DISP_REG_OVL_Y2R_PARA_YUV_A_0(idx),drivers/gpu/drm/mediatek/mtk_disp_ovl.c +3
-0+ OVL_Y2R_PARA_C_CF_YA); + mtk_ddp_write_mask(cmdq_pkt, (y2r_offset << 16), + &ovl->cmdq_reg, ovl->regs,
DISP_REG_OVL_Y2R_PARA_YUV_A_0(idx),drivers/gpu/drm/mediatek/mtk_disp_ovl.c +3
-0+ OVL_Y2R_PARA_C_CF_UA); + mtk_ddp_write_mask(cmdq_pkt, y2r_offset, + &ovl->cmdq_reg, ovl->regs,
DISP_REG_OVL_Y2R_PARA_YUV_A_1(idx),drivers/gpu/drm/mediatek/mtk_disp_ovl.c +4
-0+ OVL_Y2R_PARA_C_CF_VA); + + mtk_ddp_write_relaxed(cmdq_pkt, r2r_coef, + &ovl->cmdq_reg, ovl->regs,
DISP_REG_OVL_R2R_R0(idx));drivers/gpu/drm/mediatek/mtk_disp_ovl.c +2
-0+ mtk_ddp_write_relaxed(cmdq_pkt, r2r_coef, + &ovl->cmdq_reg, ovl->regs,
DISP_REG_OVL_R2R_G1(idx));drivers/gpu/drm/mediatek/mtk_disp_ovl.c +2
-0+ mtk_ddp_write_relaxed(cmdq_pkt, r2r_coef, + &ovl->cmdq_reg, ovl->regs,
DISP_REG_OVL_R2R_B2(idx));drivers/gpu/drm/mediatek/mtk_disp_ovl.c +3
-0+ + mtk_ddp_write_mask(cmdq_pkt, csc_en, + &ovl->cmdq_reg, ovl->regs,
DISP_REG_OVL_CLRFMT_EXT1,drivers/gpu/drm/mediatek/mtk_disp_ovl.c +17
-4+ OVL_CLRFMT_EXT1_CSC_EN(idx)); + } +if (pending->rotation &DRM_MODE_REFLECT_Y ) { con |=OVL_CON_VIRT_FLIP ; addr += (pending->height -1 ) * pending->pitch;@@ -594,15 +750,31 @@ static int mtk_disp_ovl_probe(struct platform_device *pdev) dev_err(dev, "failed to ioremap ovl\n");return PTR_ERR (priv->regs); } + + priv->data =of_device_get_match_data (dev); +platform_set_drvdata (pdev, priv); + +if (priv->data->crc_cnt) { +mtk_crtc_init_crc (&priv->crc, + priv->data->crc_ofs, priv->data- >crc_cnt, +DISP_REG_OVL_TRIG ,OVL_CRC_CLR ); + } +#if IS_REACHABLE (CONFIG_MTK_CMDQ ) ret =cmdq_dev_get_client_reg (dev, &priv->cmdq_reg,0 );if (ret)dev_dbg (dev,"get mediatek,gce-client-reg fail!\n" ); -#endif - - priv->data =of_device_get_match_data (dev); -platform_set_drvdata (pdev, priv); +if (priv->data->crc_cnt) { +if (of_property_read_u32_index (dev->of_node, +"mediatek,gce-events" ,0 , + &priv->crc.cmdq_event)){
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +1
-0+ dev_warn(dev, "failed to get gce-events forcrc\n");
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +9
-0+ } + priv->crc.cmdq_reg = &priv->cmdq_reg; +mtk_crtc_create_crc_cmdq (dev, &priv->crc); + } +#endif ret =devm_request_irq (dev, irq, mtk_disp_ovl_irq_handler,IRQF_TRIGGER_NONE ,dev_name (dev), priv);if (ret <0 ) {@@ -623,6 +795,10 @@ static int mtk_disp_ovl_probe(struct platform_device *pdev)static void mtk_disp_ovl_remove (struct platform_device *pdev) { +struct device *dev = &pdev->dev; +struct mtk_disp_ovl *ovl =dev_get_drvdata (dev); + +mtk_crtc_destroy_crc (&ovl->crc);component_del (&pdev->dev, &mtk_disp_ovl_component_ops);pm_runtime_disable (&pdev->dev);}
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +2
-0@@ -693,6 +869,8 @@ static const struct mtk_disp_ovl_data mt8195_ovl_driver_data = { .formats = mt8195_formats, .num_formats = ARRAY_SIZE(mt8195_formats), .supports_clrfmt_ext = true, + .crc_ofs = mt8195_ovl_crc_ofs, + .crc_cnt = ARRAY_SIZE(mt8195_ovl_crc_ofs), };static const struct
of_device_idmtk_disp_ovl_driver_dt_match[] = {
Re: [PATCH v6 13/14] drm/mediatek: Support CRC in OVL
Hi CK,
Quoted 35 lines · CK Hu (胡俊光)
Quoted 26 lines
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +2
-0@@ -488,6 +567,83 @@ void mtk_ovl_layer_config(struct device *dev,unsigned int idx, (state->base.fb && !state->base.fb->format->has_alpha)) ignore_pixel_alpha = OVL_CONST_BLEND; +/* +* OVL only supports 8 bits data in CRC calculation, transform 10-bit
(quoted diff) +1
-0+ * RGB to 8-bit RGB by leveraging the ability of the Y2R (YUV-to-RGB)
(quoted diff) +1
-0+ * hardware to multiply coefficients, although there is nothingto do
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +4
-0+* with the YUV format. +*/ +if (ovl->data->supports_clrfmt_ext) { +u32 y2r_coef =0 , y2r_offset =0 , r2r_coef =0 , csc_en= 0;
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +3
-0+ +if (is_10bit_rgb (fmt)) { + con |= OVL_CON_MTX_AUTO_DIS | OVL_CON_MTX_EN |
OVL_CON_MTX_PROGRAMMABLE;drivers/gpu/drm/mediatek/mtk_disp_ovl.c +4
-0+ +/* +* Y2R coefficient setting +* bit 13 is 2^1, bit 12 is 2^0, bit 11 is 2^- 1,
drivers/gpu/drm/mediatek/mtk_disp_ovl.c void mtk_ovl_layer_config(struct device *dev, unsigned int idx, · line 590
Quoted 6 lines
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +6
-0+* bit 10 is 2^-2 = 0.25 +*/ + y2r_coef =BIT (10 ); + +/* -1 in 10bit */ + y2r_offset =GENMASK (10 ,0 ) -1 ;I don't know why do this? If an input value is
0x100, then
Quoted 6 lines
0x100right shit 2 bit become0x40.0x40- 1 =0x3f.0x3fleft shift 2 bit become0xfc.So input
0x100and output0xfc. Why?
There is no input here, all the settings are direct bit assignment, and all the values are calculated by the designer. The main purpose of it is to configure the Y2R module to be able to transform 10bit RGB format into 8bit RGB, while this is not Y2R module is originally designed for.
Quoted 19 lines
Quoted 19 lines
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +4
-0+ +/* +* R2R coefficient setting +* bit 19 is 2^1, bit 18 is 2^0, bit 17 is 2^- 1,
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +9
-0+* bit 20 is 2^2 = 4 +*/ + r2r_coef =BIT (20 ); + +/* CSC_EN is for R2R */ + csc_en =OVL_CLRFMT_EXT1_CSC_EN (idx); + +/* +* 1. YUV input data - 1 and shift right for 2 bits to remove it
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +4
-0+* [R'] [0.25 0 0] [Y in - 1] +* [G'] = [ 0 0.25 0] * [U in - 1] +* [B'] [ 0 0 0.25] [V in - 1] +*
Quoted 8 lines
Quoted 2 lines
(quoted diff) +1
-0+ * 2. shift left for 2 bit letting the last 2bits become 0
You truncate the last two bit, so some quality lost. I think the quality is main function and CRC is just for debug. So it's better that
in normal case we keep quality and only for debug to lost the quality.
Got it. Will modify in the next version to enter this section only if we need to calculate the CRC.
Quoted 4 lines
I have another question. You just truncate the last two bit but it is still 10 bit value, so CRC could calculate this 10 bit value? I don't know why you say CRC just for 8 bit?
Yes, for RGB format, OVL can only handle 8bit per channel for CRC calculation, so I assume there may be similar issue handling 10bit YUV formats (P010) in the future.
Thanks,
Shawn
Re: [PATCH v6 13/14] drm/mediatek: Support CRC in OVL
Hi, Shawn:
Quoted 46 lines · Shawn Sung (宋孝謙)
Hi CK,
Quoted 36 lines · CK Hu (胡俊光)
Quoted 27 lines
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +2
-0@@ -488,6 +567,83 @@ void mtk_ovl_layer_config(struct device *dev, unsigned int idx, (state->base.fb && !state->base.fb->format->has_alpha)) ignore_pixel_alpha =OVL_CONST_BLEND ; +/* +* OVL only supports 8 bits data in CRC calculation, transform 10-bit
(quoted diff) +1
-0+ * RGB to 8-bit RGB by leveraging the ability of the Y2R (YUV-to-RGB)
(quoted diff) +1
-0+ * hardware to multiply coefficients, although there is nothingto do
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +4
-0+* with the YUV format. +*/ +if (ovl->data->supports_clrfmt_ext) { +u32 y2r_coef =0 , y2r_offset =0 , r2r_coef =0 , csc_en= 0;
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +3
-0+ +if (is_10bit_rgb (fmt)) { + con |= OVL_CON_MTX_AUTO_DIS | OVL_CON_MTX_EN |
OVL_CON_MTX_PROGRAMMABLE;drivers/gpu/drm/mediatek/mtk_disp_ovl.c +4
-0+ +/* +* Y2R coefficient setting +* bit 13 is 2^1, bit 12 is 2^0, bit 11 is 2^- 1,
drivers/gpu/drm/mediatek/mtk_disp_ovl.c void mtk_ovl_layer_config(struct device *dev, unsigned int idx, · line 590
Quoted 6 lines
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +6
-0+* bit 10 is 2^-2 = 0.25 +*/ + y2r_coef =BIT (10 ); + +/* -1 in 10bit */ + y2r_offset =GENMASK (10 ,0 ) -1 ;I don't know why do this? If an input value is
0x100, thenQuoted 6 lines
0x100right shit 2 bit become0x40.0x40- 1 =0x3f.0x3fleft shift 2 bit become0xfc.So input
0x100and output0xfc. Why?
Quoted 7 lines
There is no input here, all the settings are direct bit assignment, and
all the values are calculated by the designer. The main purpose of it is to configure the Y2R module to be able to transform 10bit RGB format
into 8bit RGB, while this is not Y2R module is originally designed for.
The input I mean is the input of Y2R, the pixel value. If input a pixel value 0x100 into Y2R, then Y2R output pixel value 0xfc, why do this? I think it should not be minus 1. If remove the minus 1, then input 0x100 and output 0x100.
Quoted 39 lines
Quoted 20 lines
Quoted 20 lines
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +4
-0+ +/* +* R2R coefficient setting +* bit 19 is 2^1, bit 18 is 2^0, bit 17 is 2^- 1,
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +9
-0+* bit 20 is 2^2 = 4 +*/ + r2r_coef =BIT (20 ); + +/* CSC_EN is for R2R */ + csc_en =OVL_CLRFMT_EXT1_CSC_EN (idx); + +/* +* 1. YUV input data - 1 and shift right for 2 bits to remove it
drivers/gpu/drm/mediatek/mtk_disp_ovl.c +4
-0+* [R'] [0.25 0 0] [Y in - 1] +* [G'] = [ 0 0.25 0] * [U in - 1] +* [B'] [ 0 0 0.25] [V in - 1] +* Quoted 8 lines
Quoted 2 lines
(quoted diff) +1
-0+ * 2. shift left for 2 bit letting the last 2bits become 0
You truncate the last two bit, so some quality lost. I think the quality is main function and CRC is just for debug. So it's better that
in normal case we keep quality and only for debug to lost the quality.Got it. Will modify in the next version to enter this section only if we need to calculate the CRC.
Quoted 6 lines
I have another question. You just truncate the last two bit but it is
still 10 bit value, so CRC could calculate this 10 bit value? I don't
know why you say CRC just for 8 bit?
Quoted 4 lines
Yes, for RGB format, OVL can only handle 8bit per channel for CRC calculation, so I assume there may be similar issue handling 10bit YUV
formats (P010) in the future.
I think this truncation is not necessary. No matter you truncate in Y2R, OVL would finally truncate pixel value last 2 two bit when calculate CRC. So this truncation is not necessary.
Regards,
CK
Quoted 4 lines
Thanks,
Shawn
PATCH v6 14/14 drm/mediatek: Support CRC in OVL adaptor
In reply to Shawn SungFrom: Hsiao Chien Sung <[email protected]>
We choose Mixer as CRC generator in OVL adaptor since its frame done event will trigger vblanks, we can know when is safe to retrieve CRC of the frame.
In OVL adaptor, there's no image procession after Mixer, unlike the OVL in VDOSYS0, Mixer's CRC will include all the effects that are applied to the frame.
--- drivers/gpu/drm/mediatek/mtk_ddp_comp.c | 3 + drivers/gpu/drm/mediatek/mtk_disp_drv.h | 3 + .../gpu/drm/mediatek/mtk_disp_ovl_adaptor.c | 21 +++++++ drivers/gpu/drm/mediatek/mtk_ethdr.c | 61 +++++++++++++++++++ drivers/gpu/drm/mediatek/mtk_ethdr.h | 5 ++ 5 files changed, 93 insertions(+)
drivers/gpu/drm/mediatek/mtk_ddp_comp.c +3 -0
@@ -406,6 +406,9 @@ static const struct mtk_ddp_comp_funcs ddp_ovl_adaptor = { .clk_enable = mtk_ovl_adaptor_clk_enable, .clk_disable = mtk_ovl_adaptor_clk_disable, .config = mtk_ovl_adaptor_config, + .crc_cnt = mtk_ovl_adaptor_crc_cnt, + .crc_entry = mtk_ovl_adaptor_crc_entry, + .crc_read = mtk_ovl_adaptor_crc_read, .start = mtk_ovl_adaptor_start, .stop = mtk_ovl_adaptor_stop, .layer_nr = mtk_ovl_adaptor_layer_nr,
drivers/gpu/drm/mediatek/mtk_disp_drv.h +3 -0
@@ -138,6 +138,9 @@ const u32 *mtk_ovl_adaptor_get_formats(struct device *dev);size_t mtk_ovl_adaptor_get_num_formats (struct device *dev);enum drm_mode_status mtk_ovl_adaptor_mode_valid (struct device *dev,const struct drm_display_mode *mode); +size_t mtk_ovl_adaptor_crc_cnt (struct device *dev); +u32 *mtk_ovl_adaptor_crc_entry (struct device *dev); +void mtk_ovl_adaptor_crc_read (struct device *dev);void mtk_rdma_bypass_shadow (struct device *dev);int mtk_rdma_clk_enable (struct device *dev);
drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c +21 -0
@@ -207,6 +207,27 @@ void mtk_ovl_adaptor_layer_config(struct device *dev, unsigned int idx,mtk_ethdr_layer_config (ethdr, idx, state, cmdq_pkt); } +size_t mtk_ovl_adaptor_crc_cnt (struct device *dev) +{ +struct mtk_disp_ovl_adaptor *ovl_adaptor =dev_get_drvdata (dev); + +return mtk_ethdr_crc_cnt (ovl_adaptor->ovl_adaptor_comp[OVL_ADAPTOR_ETHDR0 ]); +} + +u32 *mtk_ovl_adaptor_crc_entry (struct device *dev) +{ +struct mtk_disp_ovl_adaptor *ovl_adaptor =dev_get_drvdata (dev); + +return mtk_ethdr_crc_entry (ovl_adaptor->ovl_adaptor_comp[OVL_ADAPTOR_ETHDR0 ]); +} + +void mtk_ovl_adaptor_crc_read (struct device *dev) +{ +struct mtk_disp_ovl_adaptor *ovl_adaptor =dev_get_drvdata (dev); + +mtk_ethdr_crc_read (ovl_adaptor->ovl_adaptor_comp[OVL_ADAPTOR_ETHDR0 ]); +} +void mtk_ovl_adaptor_config (struct device *dev,unsigned int w,unsigned int h,unsigned int vrefresh,unsigned int bpc,struct cmdq_pkt *cmdq_pkt)
drivers/gpu/drm/mediatek/mtk_ethdr.c +61 -0
115 lines not on this page · raw message
drivers/gpu/drm/mediatek/mtk_ethdr.h +5 -0
@@ -22,4 +22,9 @@ void mtk_ethdr_register_vblank_cb(struct device *dev,void mtk_ethdr_unregister_vblank_cb (struct device *dev);void mtk_ethdr_enable_vblank (struct device *dev);void mtk_ethdr_disable_vblank (struct device *dev); + +size_t mtk_ethdr_crc_cnt (struct device *dev); +u32 *mtk_ethdr_crc_entry (struct device *dev); +void mtk_ethdr_crc_read (struct device *dev); +#endif
Signature · 1 line
2.18.0