Skip to contentSkip to conversation

Documentation: tpm_tis

PATCH In review Jarkko Sakkinen 3 participants 6 messages Mar 22, 2024 – Mar 24, 2024

Subsystems (5)
lore
Share & tools
lore

Jarkko Sakkinen

author maintainer
#0 lore raw

PATCH v4 1/1 Documentation: tpm_tis

Based recent discussions on LKML, provide preliminary bits of tpm_tis_core dependent drivers. Includes only bare essentials but can be extended later on case by case. This way some people may even want to read it later on.

Cc Jonathan Corbet <[email protected]>
CC Daniel P. Smith <[email protected]>
Cc Lino Sanfilippo <[email protected]>
Cc Jason Gunthorpe <[email protected]>
Cc Peter Huewe <[email protected]>
Cc James Bottomley <[email protected]>
Cc Alexander Steffen <[email protected]>
Cc Randy Dunlap <[email protected]>

---
v4:
- Extended the text to address some of Stefan's concerns with v2.
- Had to unfortunately remove Randy's reviewed-by because of this, given the amount of text added.
v3:
- Fixed incorrect buffer size:
https://lore.kernel.org/linux-integrity/[email protected]/
v2:
- Fixed errors reported by Randy:
https://lore.kernel.org/all/[email protected]/
- Improved the text a bit to have a better presentation.

---
 Documentation/security/tpm/index.rst   |  1 +
 Documentation/security/tpm/tpm_tis.rst | 46 ++++++++++++++++++++++++++
 2 files changed, 47 insertions(+)
 create mode 100644 Documentation/security/tpm/tpm_tis.rst
Documentation/security/tpm/index.rst +1 -0
index fc40e9f23c85..f27a17f60a96 100644
@@ -5,6 +5,7 @@ Trusted Platform Module documentation
 .. toctree::
 
    tpm_event_log
+   tpm_tis
    tpm_vtpm_proxy
    xen-tpmfront
    tpm_ftpm_tee
Documentation/security/tpm/tpm_tis.rst new file +46 -0

46 lines not on this page · raw message

Signature · 1 line
2.43.0
maintainer
#1 lore raw
Quoted 1 line · On Fri, 22 Mar 2024 14:35:36 +0200 Jarkko Sakkinen wrote:

+TCG PTP Specification defines two interface types: FIFO and CRB. The former is

Could be worth spelling out the PTP part here, I'm guessing get_maintainer made you CC netdev because it thought it stands for Precision Time Protocol. And one has to read till the end to see:

Quoted 1 line

+TCG PC Client Platform TPM Profile (PTP) Specification

author maintainer
#2 lore raw
Quoted 9 lines · Jakub Kicinski
Quoted 1 line · On Fri, 22 Mar 2024 14:35:36 +0200 Jarkko Sakkinen wrote:

+TCG PTP Specification defines two interface types: FIFO and CRB. The former is

Could be worth spelling out the PTP part here, I'm guessing get_maintainer made you CC netdev because it thought it stands for Precision Time Protocol. And one has to read till the end to see:

Quoted 1 line

+TCG PC Client Platform TPM Profile (PTP) Specification

Thanks! Good remark.

BR, Jarkko

#3 lore raw
In reply to Jarkko Sakkinen

Hi Jarkko,

Quoted 53 lines · Jarkko Sakkinen

Based recent discussions on LKML, provide preliminary bits of tpm_tis_core dependent drivers. Includes only bare essentials but can be extended later on case by case. This way some people may even want to read it later on.

Cc Jonathan Corbet <[email protected]>
CC Daniel P. Smith <[email protected]>
Cc Lino Sanfilippo <[email protected]>
Cc Jason Gunthorpe <[email protected]>
Cc Peter Huewe <[email protected]>
Cc James Bottomley <[email protected]>
Cc Alexander Steffen <[email protected]>
Cc Randy Dunlap <[email protected]>

---
v4:
- Extended the text to address some of Stefan's concerns with v2.
- Had to unfortunately remove Randy's reviewed-by because of this, given the amount of text added.
v3:
- Fixed incorrect buffer size:

   https://lore.kernel.org/linux-integrity/[email protected]/
v2:
- Fixed errors reported by Randy:
   https://lore.kernel.org/all/[email protected]/
- Improved the text a bit to have a better presentation.
---
  Documentation/security/tpm/index.rst   |  1 +
  Documentation/security/tpm/tpm_tis.rst | 46 ++++++++++++++++++++++++++
  2 files changed, 47 insertions(+)

create mode 100644 Documentation/security/tpm/tpm_tis.rst

Documentation/security/tpm/index.rst +1 -0
index fc40e9f23c85..f27a17f60a96 100644
@@ -5,6 +5,7 @@ Trusted Platform Module documentation
  .. toctree::
 
     tpm_event_log
+   tpm_tis
     tpm_vtpm_proxy
     xen-tpmfront
     tpm_ftpm_tee
Documentation/security/tpm/tpm_tis.rst new file +0 -0
new file mode 100644
index 000000000000..b448ea3db71d

Documentation/security/tpm/tpm_tis.rst line 7

Quoted 7 lines
Documentation/security/tpm/tpm_tis.rst new file +7 -0
@@ -0,0 +1,46 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================
+TPM FIFO interface driver
+=========================
+
+TCG PTP Specification defines two interface types: FIFO and CRB. The former is

I believe in the spec, the authors were specific to classify these as software interfaces. Not sure if you would want to carry that distinction into this document.

Documentation/security/tpm/tpm_tis.rst line 14

Quoted 7 lines
Documentation/security/tpm/tpm_tis.rst new file +7 -0
+based on sequenced read and write operations,  and the latter is based on a
+buffer containing the full command or response.
+
+FIFO (First-In-First-Out) interface is used by the tpm_tis_core dependent
+drivers. Originally Linux had only a driver called tpm_tis, which covered
+memory mapped (aka MMIO) interface but it was later on extended to cover other
+physical interfaces supported by the TCG standard.

Would it be worth clarifying here that one of those interfaces is defined in the Mobile TPM specification, which also refers to its interface as the CRB interface. In the past, this has caused great confusion when working with individuals from the embedded community, e.g., Arm. The Mobile TPM CRB interface, which can also be found being used by some generations of AMD fTPM, is a doorbell style interface using general-purpose memory. I would also point out that the Mobile TPM CRB interface does not provide for the concept of localities.

In relation to the MMIO backed interfaces, I have heard comment that the software interfaces were not meant to require the physical interface be MMIO. In fact, in section 9.2, "Hardware Implementation of a TPM in a PC Client Platform", there is a comment about Locality 4 registers being accessible via an implementation specific mechanism other than MMIO. Additionally, there were some discussions about clarifying the PTP on how the software interfaces might be expected to work for a general-purpose memory backed implementation.

Quoted 9 lines
Documentation/security/tpm/tpm_tis.rst new file +9 -0
+For legacy compliance the original MMIO driver is called tpm_tis and the
+framework for FIFO drivers is named as tpm_tis_core. The postfix "tis" in
+tpm_tis comes from the TPM Interface Specification, which is the hardware
+interface specification for TPM 1.x chips.
+
+Communication is based on a 20 KiB buffer shared by the TPM chip through a
+hardware bus or memory map, depending on the physical wiring. The buffer is
+further split into five equal-size 4 KiB buffers, which provide equivalent
+sets of registers for communication between the CPU and TPM. These

Documentation/security/tpm/tpm_tis.rst line 34

Quoted 10 lines
Documentation/security/tpm/tpm_tis.rst new file +10 -0
+communication endpoints are called localities in the TCG terminology.
+
+When the kernel wants to send commands to the TPM chip, it first reserves
+locality 0 by setting the requestUse bit in the TPM_ACCESS register. The bit is
+cleared by the chip when the access is granted. Once it completes its
+communication, the kernel writes the TPM_ACCESS.activeLocality bit. This
+informs the chip that the locality has been relinquished.
+
+Pending localities are served in order by the chip in descending order, one at
+a time:

I think I get what you are trying to say, but I find the wording here could be a bit misleading. Instead of saying they are served in order, I would suggest saying something to the extent that: there are five localities, more than one can be requested at a time, but only one will ever be active. Selection priority when multiple requests are pending is detailed in the Informative comment on locality priority in Section 6.2.1, "TPM Locality Levels".

Documentation/security/tpm/tpm_tis.rst line 37

Quoted 2 lines
Documentation/security/tpm/tpm_tis.rst new file +2 -0
+- Locality 0 has the lowest priority.
+- Locality 5 has the highest priority.

Do you mean Locality 4?

Quoted 8 lines
Documentation/security/tpm/tpm_tis.rst new file +8 -0
+Further information on the purpose and meaning of the localities can be found
+in section 3.2 of the TCG PC Client Platform TPM Profile Specification.
+
+References
+==========
+
+TCG PC Client Platform TPM Profile (PTP) Specification
+https://trustedcomputinggroup.org/resource/pc-client-platform-tpm-profile-ptp-specification/
author maintainer
#4 lore raw
Quoted 68 lines · Daniel P. Smith

Hi Jarkko,

Quoted 53 lines · Jarkko Sakkinen

Based recent discussions on LKML, provide preliminary bits of tpm_tis_core dependent drivers. Includes only bare essentials but can be extended later on case by case. This way some people may even want to read it later on.

Cc Jonathan Corbet <[email protected]>
CC Daniel P. Smith <[email protected]>
Cc Lino Sanfilippo <[email protected]>
Cc Jason Gunthorpe <[email protected]>
Cc Peter Huewe <[email protected]>
Cc James Bottomley <[email protected]>
Cc Alexander Steffen <[email protected]>
Cc Randy Dunlap <[email protected]>

---
v4:
- Extended the text to address some of Stefan's concerns with v2.
- Had to unfortunately remove Randy's reviewed-by because of this, given the amount of text added.
v3:
- Fixed incorrect buffer size:

   https://lore.kernel.org/linux-integrity/[email protected]/
v2:
- Fixed errors reported by Randy:
   https://lore.kernel.org/all/[email protected]/
- Improved the text a bit to have a better presentation.
---
  Documentation/security/tpm/index.rst   |  1 +
  Documentation/security/tpm/tpm_tis.rst | 46 ++++++++++++++++++++++++++
  2 files changed, 47 insertions(+)

create mode 100644 Documentation/security/tpm/tpm_tis.rst

Documentation/security/tpm/index.rst +1 -0
index fc40e9f23c85..f27a17f60a96 100644
@@ -5,6 +5,7 @@ Trusted Platform Module documentation
  .. toctree::
 
     tpm_event_log
+   tpm_tis
     tpm_vtpm_proxy
     xen-tpmfront
     tpm_ftpm_tee
Documentation/security/tpm/tpm_tis.rst new file +0 -0
new file mode 100644
index 000000000000..b448ea3db71d

Documentation/security/tpm/tpm_tis.rst line 7

Quoted 7 lines
Documentation/security/tpm/tpm_tis.rst new file +7 -0
@@ -0,0 +1,46 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================
+TPM FIFO interface driver
+=========================
+
+TCG PTP Specification defines two interface types: FIFO and CRB. The former is

I believe in the spec, the authors were specific to classify these as software interfaces. Not sure if you would want to carry that distinction into this document.

Quoted 16 lines

Documentation/security/tpm/tpm_tis.rst line 14

Quoted 7 lines
Documentation/security/tpm/tpm_tis.rst new file +7 -0
+based on sequenced read and write operations,  and the latter is based on a
+buffer containing the full command or response.
+
+FIFO (First-In-First-Out) interface is used by the tpm_tis_core dependent
+drivers. Originally Linux had only a driver called tpm_tis, which covered
+memory mapped (aka MMIO) interface but it was later on extended to cover other
+physical interfaces supported by the TCG standard.

Would it be worth clarifying here that one of those interfaces is defined in the Mobile TPM specification, which also refers to its interface as the CRB interface. In the past, this has caused great confusion when working with individuals from the embedded community, e.g., Arm. The Mobile TPM CRB interface, which can also be found being used by some generations of AMD fTPM, is a doorbell style interface using general-purpose memory. I would also point out that the Mobile TPM CRB interface does not provide for the concept of localities.

I don't necessarily disagree but it is out of scope for this. I'm not sure tho why "mobile" CRB would ever need that sort of separate dicussion.

Some CRB implementations have localities some don't, and also fTPM implementations on x86 vary, no need to state that separately for mobile.

Quoted 8 lines

In relation to the MMIO backed interfaces, I have heard comment that the software interfaces were not meant to require the physical interface be MMIO. In fact, in section 9.2, "Hardware Implementation of a TPM in a PC Client Platform", there is a comment about Locality 4 registers being accessible via an implementation specific mechanism other than MMIO. Additionally, there were some discussions about clarifying the PTP on how the software interfaces might be expected to work for a general-purpose memory backed implementation.

So what is the error in the current want, i.e. what do you want to change? I think this type of stuff can be extended but I don't want to pollute this with too much detail at this point.

Only what matters for daily kernel development as reminder is what this type of doc's should contain.

BR, Jarkko

author maintainer
#5 lore raw
Quoted 9 lines · Jarkko Sakkinen
Quoted 8 lines

Would it be worth clarifying here that one of those interfaces is defined in the Mobile TPM specification, which also refers to its interface as the CRB interface. In the past, this has caused great confusion when working with individuals from the embedded community, e.g., Arm. The Mobile TPM CRB interface, which can also be found being used by some generations of AMD fTPM, is a doorbell style interface using general-purpose memory. I would also point out that the Mobile TPM CRB interface does not provide for the concept of localities.

Quoted 7 lines

I don't necessarily disagree but it is out of scope for this. I'm not sure tho why "mobile" CRB would ever need that sort of separate dicussion.

Some CRB implementations have localities some don't, and also fTPM implementations on x86 vary, no need to state that separately for mobile.

I.e. the variance exist but it is not "mobile" specific.

E.g. when I developed tpm_crb in 2014 at that time Intel PTT only had a single locality (AFAIK later multiple localities were added to support TXT).

In all cases this tpm_crb discussion is not really part of tpm_tis discussion.

BR, Jarkko