usb: typec: tcpm: Correct the PDO counting in pd_set
Subsystems (4)
PATCH v2 1/1 usb: typec: tcpm: Correct the PDO counting in pd_set
Off-by-one errors happen because nr_snk_pdo and nr_src_pdo are incorrectly added one. The index of the loop is equal to the number of PDOs to be updated when leaving the loop and it doesn't need to be added one.
When doing the power negotiation, TCPM relies on the "nr_snk_pdo" as the size of the local sink PDO array to match the Source capabilities of the partner port. If the off-by-one overflow occurs, a wrong RDO might be sent and unexpected power transfer might happen such as over voltage or over current (than expected).
"nr_src_pdo" is used to set the Rp level when the port is in Source role. It is also the array size of the local Source capabilities when filling up the buffer which will be sent as the Source PDOs (such as in Power Negotiation). If the off-by-one overflow occurs, a wrong Rp level might be set and wrong Source PDOs will be sent to the partner port. This could potentially cause over current or port resets.
---
v1 -> v2:
- update the commit message (adding the problems this patch solves)
drivers/usb/typec/tcpm/tcpm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/usb/typec/tcpm/tcpm.c +2 -2
@@ -6855,14 +6855,14 @@ static int tcpm_pd_set(struct typec_port *p, struct usb_power_delivery *pd)if (data->sink_desc.pdo[0 ]) {for (i =0 ; i <PDO_MAX_OBJECTS && data->sink_desc.pdo[i]; i++) port->snk_pdo[i] = data->sink_desc.pdo[i]; - port->nr_snk_pdo = i +1 ; + port->nr_snk_pdo = i; port->operating_snk_mw = data->operating_snk_mw; }if (data->source_desc.pdo[0 ]) {for (i =0 ; i <PDO_MAX_OBJECTS && data->source_desc.pdo[i]; i++) port->snk_pdo[i] = data->source_desc.pdo[i]; - port->nr_src_pdo = i +1 ; + port->nr_src_pdo = i; }switch (port->state) {
Signature · 1 line
2.44.0.396.g6e790dbe36-goog
Quoted 18 lines · Kyle Tso
Off-by-one errors happen because
nr_snk_pdoandnr_src_pdoare incorrectly added one. The index of the loop is equal to the number of PDOs to be updated when leaving the loop and it doesn't need to be added one.When doing the power negotiation, TCPM relies on the "
nr_snk_pdo" as the size of the local sink PDO array to match the Source capabilities of the partner port. If the off-by-one overflow occurs, a wrong RDO might be sent and unexpected power transfer might happen such as over voltage or over current (than expected)."
nr_src_pdo" is used to set the Rp level when the port is in Source role. It is also the array size of the local Source capabilities when filling up the buffer which will be sent as the Source PDOs (such as in Power Negotiation). If the off-by-one overflow occurs, a wrong Rp level might be set and wrong Source PDOs will be sent to the partner port. This could potentially cause over current or port resets.
Quoted 3 lines
Fixes cd099cde4ed2 ("usb: typec: tcpm: Support multiple capabilities")Signed-off-by Kyle Tso <[email protected]>
Quoted 30 lines
---
v1 -> v2:
- update the commit message (adding the problems this patch solves)drivers/usb/typec/tcpm/tcpm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)drivers/usb/typec/tcpm/tcpm.c +2
-2@@ -6855,14 +6855,14 @@ static int tcpm_pd_set(struct typec_port *p, struct usb_power_delivery *pd)if (data->sink_desc.pdo[0 ]) {for (i =0 ; i <PDO_MAX_OBJECTS && data->sink_desc.pdo[i]; i++) port->snk_pdo[i] = data->sink_desc.pdo[i]; - port->nr_snk_pdo = i +1 ; + port->nr_snk_pdo = i; port->operating_snk_mw = data->operating_snk_mw; }if (data->source_desc.pdo[0 ]) {for (i =0 ; i <PDO_MAX_OBJECTS && data->source_desc.pdo[i]; i++) port->snk_pdo[i] = data->source_desc.pdo[i]; - port->nr_src_pdo = i +1 ; + port->nr_src_pdo = i; }switch (port->state) {Signature · 1 line
2.44.0.396.g6e790dbe36-goog
Signature · 1 line
heikki
Greg KH
maintainerQuoted 21 lines · Kyle Tso
Off-by-one errors happen because
nr_snk_pdoandnr_src_pdoare incorrectly added one. The index of the loop is equal to the number of PDOs to be updated when leaving the loop and it doesn't need to be added one.When doing the power negotiation, TCPM relies on the "
nr_snk_pdo" as the size of the local sink PDO array to match the Source capabilities of the partner port. If the off-by-one overflow occurs, a wrong RDO might be sent and unexpected power transfer might happen such as over voltage or over current (than expected)."
nr_src_pdo" is used to set the Rp level when the port is in Source role. It is also the array size of the local Source capabilities when filling up the buffer which will be sent as the Source PDOs (such as in Power Negotiation). If the off-by-one overflow occurs, a wrong Rp level might be set and wrong Source PDOs will be sent to the partner port. This could potentially cause over current or port resets.Fixes cd099cde4ed2 ("usb: typec: tcpm: Support multiple capabilities")Signed-off-by Kyle Tso <[email protected]>
Quoted 6 lines
---
v1 -> v2:
- update the commit message (adding the problems this patch solves)drivers/usb/typec/tcpm/tcpm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
This fails to apply to my usb-linus branch :(
Can you rebase and resend?
thanks,
greg k-h
Quoted 30 lines · Greg KH
Quoted 21 lines · Kyle Tso
Off-by-one errors happen because
nr_snk_pdoandnr_src_pdoare incorrectly added one. The index of the loop is equal to the number of PDOs to be updated when leaving the loop and it doesn't need to be added one.When doing the power negotiation, TCPM relies on the "
nr_snk_pdo" as the size of the local sink PDO array to match the Source capabilities of the partner port. If the off-by-one overflow occurs, a wrong RDO might be sent and unexpected power transfer might happen such as over voltage or over current (than expected)."
nr_src_pdo" is used to set the Rp level when the port is in Source role. It is also the array size of the local Source capabilities when filling up the buffer which will be sent as the Source PDOs (such as in Power Negotiation). If the off-by-one overflow occurs, a wrong Rp level might be set and wrong Source PDOs will be sent to the partner port. This could potentially cause over current or port resets.Fixes cd099cde4ed2 ("usb: typec: tcpm: Support multiple capabilities")Signed-off-by Kyle Tso <[email protected]>Quoted 6 lines
---
v1 -> v2:
- update the commit message (adding the problems this patch solves)drivers/usb/typec/tcpm/tcpm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
Quoted 7 lines
This fails to apply to my usb-linus branch :(
Can you rebase and resend?
thanks,
greg k-h
Just sent v3