Linux 6.6.23
Sasha Levin
maintainer-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
I'm announcing the release of the 6.6.23 kernel.
All users of the 6.6 kernel series must upgrade.
The updated 6.6.y git tree can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-6.6.y
and can be browsed at the normal kernel.org git web browser:
https://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summary
Thanks,
Sasha
- ------------
.../devicetree/bindings/display/msm/qcom,mdss.yaml | 1 + Documentation/filesystems/overlayfs.rst | 17 +- Makefile | 2 +- arch/arm/boot/dts/amazon/alpine.dtsi | 1 - arch/arm/boot/dts/arm/arm-realview-pb1176.dts | 2 +- arch/arm/boot/dts/aspeed/aspeed-g4.dtsi | 14 - arch/arm/boot/dts/aspeed/aspeed-g5.dtsi | 15 +- arch/arm/boot/dts/aspeed/aspeed-g6.dtsi | 18 +- arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi | 3 + arch/arm/boot/dts/broadcom/bcm-hr2.dtsi | 1 + arch/arm/boot/dts/broadcom/bcm-nsp.dtsi | 2 + .../dts/intel/ixp/intel-ixp42x-gateway-7001.dts | 2 + .../intel/ixp/intel-ixp42x-goramo-multilink.dts | 2 + arch/arm/boot/dts/marvell/kirkwood-l-50.dts | 2 + arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi | 2 + arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi | 1 - arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi | 1 - arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi | 1 - arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi | 25 +- arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts | 3 - arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi | 2 +- arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi | 1 - arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi | 1 - arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi | 1 - .../boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi | 1 + .../dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi | 1 + arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts | 1 + arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts | 1 + arch/arm/boot/dts/qcom/qcom-msm8974.dtsi | 2 +- arch/arm/boot/dts/qcom/qcom-sdx55.dtsi | 8 +- arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts | 12 + arch/arm/boot/dts/renesas/r8a73a4.dtsi | 9 +- arch/arm/boot/dts/renesas/r8a7790-lager.dts | 1 + arch/arm/boot/dts/renesas/r8a7790-stout.dts | 1 + arch/arm/boot/dts/renesas/r8a7791-koelsch.dts | 1 + arch/arm/boot/dts/renesas/r8a7791-porter.dts | 1 + arch/arm/boot/dts/renesas/r8a7792-blanche.dts | 1 + arch/arm/boot/dts/renesas/r8a7793-gose.dts | 1 + arch/arm/boot/dts/renesas/r8a7794-alt.dts | 1 + arch/arm/boot/dts/renesas/r8a7794-silk.dts | 1 + arch/arm/boot/dts/rockchip/rv1108.dtsi | 8 - arch/arm/boot/dts/st/stm32429i-eval.dts | 1 - arch/arm/boot/dts/st/stm32mp157c-dk2.dts | 1 - arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts | 1 - arch/arm/crypto/sha256_glue.c | 13 +- arch/arm/crypto/sha512-glue.c | 12 +- arch/arm64/Kconfig | 2 +- .../boot/dts/allwinner/sun50i-h6-beelink-gs1.dts | 2 + arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi | 2 + arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 7 +- arch/arm64/boot/dts/amazon/alpine-v2.dtsi | 1 - arch/arm64/boot/dts/amazon/alpine-v3.dtsi | 1 - arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi | 3 - arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi | 1 + .../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 1 + .../boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts | 38 +- .../arm64/boot/dts/freescale/imx8mm-kontron-bl.dts | 38 +- .../boot/dts/freescale/imx8mm-kontron-osm-s.dtsi | 6 +- .../boot/dts/freescale/imx8mm-kontron-sl.dtsi | 4 +- .../boot/dts/freescale/imx8mm-venice-gw71xx.dtsi | 29 +- .../dts/freescale/imx8mp-data-modul-edm-sbc.dts | 2 +- arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 33 +- arch/arm64/boot/dts/lg/lg1312.dtsi | 1 - arch/arm64/boot/dts/lg/lg1313.dtsi | 1 - arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 10 +- arch/arm64/boot/dts/marvell/armada-ap80x.dtsi | 1 - arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 10 +- .../boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 1 + arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 1 + .../boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts | 2 +- arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 7 +- arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 3 +- arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 7 +- .../boot/dts/mediatek/mt8183-kukui-kakadu.dtsi | 4 + .../boot/dts/mediatek/mt8183-kukui-kodama.dtsi | 4 + .../boot/dts/mediatek/mt8183-kukui-krane.dtsi | 4 + arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 4 - arch/arm64/boot/dts/mediatek/mt8186.dtsi | 18 +- arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi | 4 - arch/arm64/boot/dts/mediatek/mt8192.dtsi | 2 +- .../boot/dts/mediatek/mt8195-cherry-tomato-r1.dts | 4 + .../boot/dts/mediatek/mt8195-cherry-tomato-r2.dts | 4 + .../boot/dts/mediatek/mt8195-cherry-tomato-r3.dts | 4 + arch/arm64/boot/dts/mediatek/mt8195-demo.dts | 1 + .../dts/nvidia/tegra234-p3737-0000+p3701-0000.dts | 2 +- arch/arm64/boot/dts/qcom/ipq6018.dtsi | 8 +- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 16 +- arch/arm64/boot/dts/qcom/qcm2290.dtsi | 7 + arch/arm64/boot/dts/qcom/sa8540p.dtsi | 3 + arch/arm64/boot/dts/qcom/sc8180x.dtsi | 26 +- arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 2 +- .../arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi | 8 +- arch/arm64/boot/dts/qcom/sdm845.dtsi | 4 +- arch/arm64/boot/dts/qcom/sm6115.dtsi | 7 + arch/arm64/boot/dts/qcom/sm8150.dtsi | 6 +- arch/arm64/boot/dts/qcom/sm8450.dtsi | 12 + arch/arm64/boot/dts/qcom/sm8550.dtsi | 2 +- arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 4 +- arch/arm64/boot/dts/renesas/r8a779g0.dtsi | 88 +- arch/arm64/boot/dts/renesas/r9a07g043u.dtsi | 12 +- arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 22 +- arch/arm64/boot/dts/renesas/r9a07g054.dtsi | 22 +- arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 4 + arch/arm64/boot/dts/rockchip/rk356x.dtsi | 3 +- arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts | 1 + arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 2 - arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 9 +- arch/arm64/boot/dts/ti/k3-am62p.dtsi | 2 +- arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 11 +- arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi | 1 + arch/arm64/boot/dts/ti/k3-am642-evm.dts | 34 +- .../boot/dts/ti/k3-am642-phyboard-electra-rdk.dts | 1 + arch/arm64/boot/dts/ti/k3-am642-sk.dts | 33 +- .../boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts | 1 - arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi | 1 + arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 5 +- .../boot/dts/ti/k3-j7200-common-proc-board.dts | 18 +- .../boot/dts/ti/k3-j721s2-common-proc-board.dts | 2 - arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 2 +- arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 2 - arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi | 2 +- arch/arm64/include/asm/fpsimd.h | 12 +- arch/arm64/kernel/ptrace.c | 3 +- arch/mips/include/asm/ptrace.h | 1 + arch/parisc/kernel/ftrace.c | 2 +- arch/powerpc/include/asm/vmalloc.h | 4 +- arch/powerpc/perf/hv-gpci.c | 29 +- arch/powerpc/platforms/embedded6xx/linkstation.c | 3 - arch/powerpc/platforms/embedded6xx/mpc10x.h | 3 + arch/powerpc/platforms/ps3/Kconfig | 1 + .../platforms/pseries/papr_platform_attributes.c | 8 +- .../riscv/boot/dts/sifive/hifive-unmatched-a00.dts | 1 + arch/riscv/include/asm/pgtable.h | 2 + arch/s390/kernel/cache.c | 1 + arch/s390/kernel/perf_pai_crypto.c | 2 +- arch/s390/kernel/perf_pai_ext.c | 2 +- arch/s390/kernel/vdso32/Makefile | 2 +- arch/s390/kernel/vdso64/Makefile | 2 +- arch/s390/kernel/vtime.c | 4 +- arch/sparc/kernel/leon_pci_grpci1.c | 2 +- arch/sparc/kernel/leon_pci_grpci2.c | 2 +- arch/x86/events/amd/core.c | 1 - arch/x86/hyperv/hv_vtl.c | 26 +- arch/x86/include/asm/page.h | 6 +- arch/x86/include/asm/vsyscall.h | 10 + arch/x86/kernel/acpi/cppc.c | 2 +- arch/x86/kernel/cpu/resctrl/core.c | 10 +- arch/x86/kernel/cpu/resctrl/internal.h | 8 +- arch/x86/kernel/cpu/resctrl/monitor.c | 48 +- arch/x86/kernel/cpu/resctrl/rdtgroup.c | 14 +- arch/x86/mm/fault.c | 9 - arch/x86/mm/maccess.c | 10 + arch/x86/mm/mem_encrypt_identity.c | 10 +- arch/x86/tools/relocs.c | 8 + arch/x86/xen/smp.c | 12 + block/bdev.c | 48 + block/opal_proto.h | 1 + block/sed-opal.c | 6 +- crypto/Kconfig | 5 +- drivers/acpi/processor_idle.c | 2 + drivers/acpi/resource.c | 33 + drivers/acpi/scan.c | 8 +- drivers/base/regmap/regmap-kunit.c | 54 +- drivers/block/aoe/aoecmd.c | 12 +- drivers/block/aoe/aoenet.c | 1 + drivers/block/nbd.c | 6 + drivers/bluetooth/btmtk.c | 4 +- drivers/bluetooth/btusb.c | 10 +- drivers/bluetooth/hci_h5.c | 5 +- drivers/bluetooth/hci_qca.c | 6 +- drivers/bluetooth/hci_serdev.c | 9 +- drivers/bluetooth/hci_uart.h | 12 +- drivers/bus/Kconfig | 5 +- drivers/bus/mhi/ep/main.c | 2 +- drivers/clk/clk.c | 3 + drivers/clk/hisilicon/clk-hi3519.c | 2 +- drivers/clk/hisilicon/clk-hi3559a.c | 1 - drivers/clk/imx/clk-imx8mp-audiomix.c | 11 +- drivers/clk/mediatek/clk-mt7622-apmixedsys.c | 1 - drivers/clk/mediatek/clk-mt7981-topckgen.c | 5 +- drivers/clk/mediatek/clk-mt8135-apmixedsys.c | 4 +- drivers/clk/mediatek/clk-mt8183.c | 2 +- drivers/clk/meson/axg.c | 2 + drivers/clk/qcom/dispcc-sdm845.c | 2 + drivers/clk/qcom/gcc-ipq5018.c | 6 +- drivers/clk/qcom/reset.c | 27 +- drivers/clk/renesas/r8a779f0-cpg-mssr.c | 2 +- drivers/clk/renesas/r8a779g0-cpg-mssr.c | 11 +- drivers/clk/samsung/clk-exynos850.c | 33 +- drivers/clk/zynq/clkc.c | 8 +- drivers/comedi/drivers/comedi_test.c | 30 +- drivers/cpufreq/Kconfig.arm | 1 + drivers/cpufreq/brcmstb-avs-cpufreq.c | 2 + drivers/cpufreq/cpufreq.c | 18 +- drivers/cpufreq/freq_table.c | 2 +- drivers/cpufreq/mediatek-cpufreq-hw.c | 19 +- drivers/crypto/ccp/platform-access.c | 11 +- .../crypto/intel/qat/qat_4xxx/adf_4xxx_hw_data.c | 39 +- drivers/crypto/intel/qat/qat_common/Makefile | 1 + .../crypto/intel/qat/qat_common/adf_cfg_services.c | 47 + .../crypto/intel/qat/qat_common/adf_cfg_services.h | 18 +- drivers/crypto/intel/qat/qat_common/adf_clock.c | 3 + drivers/crypto/xilinx/zynqmp-aes-gcm.c | 3 + drivers/cxl/core/region.c | 62 +- drivers/dma/Kconfig | 14 +- drivers/firewire/core-card.c | 14 +- drivers/firmware/arm_scmi/smc.c | 7 + drivers/firmware/efi/libstub/x86-stub.c | 7 +- drivers/gpio/Kconfig | 3 +- drivers/gpio/gpiolib-devres.c | 2 +- drivers/gpio/gpiolib.c | 14 +- drivers/gpio/gpiolib.h | 8 + drivers/gpu/drm/Kconfig | 5 +- drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c | 6 +- drivers/gpu/drm/amd/amdgpu/atom.c | 2 +- drivers/gpu/drm/amd/amdgpu/soc15.c | 45 +- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 16 +- .../drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c | 2 +- .../drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c | 7 +- .../dc/link/protocols/link_edp_panel_control.c | 3 +- drivers/gpu/drm/amd/pm/swsmu/smu11/arcturus_ppt.c | 4 +- drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c | 4 +- .../gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_6_ppt.c | 4 +- drivers/gpu/drm/ci/test.yml | 5 +- drivers/gpu/drm/lima/lima_gem.c | 23 +- drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 12 +- drivers/gpu/drm/mediatek/mtk_dsi.c | 10 +- drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 11 +- drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h | 7 + .../gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c | 7 +- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c | 15 +- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h | 1 + drivers/gpu/drm/nouveau/nouveau_bo.c | 2 + drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c | 2 + drivers/gpu/drm/panel/panel-edp.c | 3 +- drivers/gpu/drm/radeon/ni.c | 2 +- drivers/gpu/drm/rockchip/inno_hdmi.c | 4 +- drivers/gpu/drm/rockchip/rockchip_lvds.c | 3 +- drivers/gpu/drm/tegra/dpaux.c | 14 +- drivers/gpu/drm/tegra/dsi.c | 59 +- drivers/gpu/drm/tegra/fb.c | 1 + drivers/gpu/drm/tegra/hdmi.c | 20 +- drivers/gpu/drm/tegra/output.c | 16 +- drivers/gpu/drm/tegra/rgb.c | 18 +- drivers/gpu/drm/tidss/tidss_crtc.c | 10 + drivers/gpu/drm/tidss/tidss_plane.c | 2 +- drivers/gpu/drm/vkms/vkms_composer.c | 14 +- drivers/gpu/drm/vmwgfx/vmwgfx_gmrid_manager.c | 5 +- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 11 +- drivers/hid/amd-sfh-hid/amd_sfh_pcie.c | 30 +- drivers/hid/amd-sfh-hid/amd_sfh_pcie.h | 6 +- drivers/hid/hid-lenovo.c | 57 +- drivers/hid/hid-multitouch.c | 4 + drivers/hv/Kconfig | 1 + drivers/hwtracing/coresight/coresight-core.c | 30 +- drivers/hwtracing/coresight/coresight-etm-perf.c | 2 +- drivers/hwtracing/coresight/coresight-etm4x-core.c | 10 +- drivers/hwtracing/coresight/coresight-priv.h | 2 +- drivers/hwtracing/ptt/hisi_ptt.c | 6 +- drivers/i3c/master/dw-i3c-master.c | 4 +- drivers/iio/industrialio-gts-helper.c | 15 +- drivers/iio/pressure/mprls0025pa.c | 4 +- drivers/infiniband/core/device.c | 37 +- drivers/infiniband/hw/hns/hns_roce_device.h | 17 +- drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 16 +- drivers/infiniband/hw/irdma/verbs.c | 3 +- drivers/infiniband/hw/mana/main.c | 2 +- drivers/infiniband/hw/mlx5/devx.c | 2 +- drivers/infiniband/hw/mlx5/wr.c | 2 +- drivers/infiniband/ulp/rtrs/rtrs-clt-sysfs.c | 2 +- drivers/infiniband/ulp/srpt/ib_srpt.c | 3 +- drivers/input/keyboard/gpio_keys_polled.c | 10 +- drivers/input/misc/iqs7222.c | 112 ++ drivers/iommu/Kconfig | 2 +- drivers/iommu/amd/init.c | 3 + drivers/iommu/intel/Makefile | 2 + drivers/iommu/intel/pasid.c | 3 + drivers/iommu/irq_remapping.c | 3 +- drivers/leds/flash/leds-sgm3140.c | 3 + drivers/leds/leds-aw2013.c | 1 + drivers/md/dm-bufio.c | 6 +- drivers/md/dm-crypt.c | 4 +- drivers/md/dm-integrity.c | 30 +- drivers/md/dm-io.c | 23 +- drivers/md/dm-kcopyd.c | 4 +- drivers/md/dm-log.c | 4 +- drivers/md/dm-raid.c | 4 +- drivers/md/dm-raid1.c | 6 +- drivers/md/dm-snap-persistent.c | 4 +- drivers/md/dm-verity-target.c | 2 +- drivers/md/dm-verity.h | 4 +- drivers/md/dm-writecache.c | 8 +- drivers/md/dm.c | 26 +- drivers/md/md.c | 14 +- drivers/media/common/v4l2-tpg/v4l2-tpg-core.c | 52 +- drivers/media/dvb-core/dvbdev.c | 5 + drivers/media/dvb-frontends/stv0367.c | 34 +- drivers/media/i2c/imx290.c | 16 +- drivers/media/i2c/tc358743.c | 7 +- drivers/media/pci/intel/ivsc/mei_csi.c | 4 +- drivers/media/pci/ttpci/budget-av.c | 8 +- drivers/media/platform/cadence/cdns-csi2rx.c | 2 +- drivers/media/platform/mediatek/mdp/mtk_mdp_vpu.c | 2 +- .../mediatek/vcodec/common/mtk_vcodec_fw_vpu.c | 10 +- drivers/media/platform/mediatek/vpu/mtk_vpu.c | 2 +- drivers/media/platform/mediatek/vpu/mtk_vpu.h | 2 +- .../platform/rockchip/rkisp1/rkisp1-capture.c | 3 + .../media/platform/rockchip/rkisp1/rkisp1-common.h | 2 + .../media/platform/rockchip/rkisp1/rkisp1-csi.c | 3 + .../media/platform/rockchip/rkisp1/rkisp1-dev.c | 22 + .../media/platform/rockchip/rkisp1/rkisp1-isp.c | 3 + drivers/media/platform/sunxi/sun8i-di/sun8i-di.c | 69 +- drivers/media/usb/em28xx/em28xx-cards.c | 4 + drivers/media/usb/go7007/go7007-driver.c | 8 +- drivers/media/usb/go7007/go7007-usb.c | 4 +- drivers/media/usb/pvrusb2/pvrusb2-context.c | 10 +- drivers/media/usb/pvrusb2/pvrusb2-dvb.c | 6 +- drivers/media/usb/pvrusb2/pvrusb2-v4l2.c | 11 +- drivers/media/v4l2-core/v4l2-cci.c | 4 +- drivers/media/v4l2-core/v4l2-mem2mem.c | 10 +- drivers/memory/tegra/tegra234.c | 16 +- drivers/mfd/altera-sysmgr.c | 4 +- drivers/mfd/cs42l43.c | 72 +- drivers/mfd/syscon.c | 4 +- drivers/misc/mei/gsc_proxy/mei_gsc_proxy.c | 8 +- drivers/mmc/host/wmt-sdmmc.c | 4 - drivers/mtd/maps/physmap-core.c | 2 +- drivers/mtd/nand/raw/lpc32xx_mlc.c | 5 +- drivers/mtd/nand/spi/esmt.c | 9 +- drivers/net/can/m_can/m_can.c | 23 +- drivers/net/dsa/mt7530.c | 60 +- drivers/net/dsa/mt7530.h | 22 +- drivers/net/ethernet/amazon/ena/ena_netdev.c | 17 - drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h | 6 +- drivers/net/ethernet/hisilicon/hns3/hns3_dcbnl.c | 2 +- .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 5 +- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_ptp.c | 2 +- drivers/net/ethernet/intel/ice/ice_main.c | 24 +- drivers/net/ethernet/intel/igb/igb_main.c | 23 +- drivers/net/ethernet/intel/igc/igc_main.c | 12 +- drivers/net/ethernet/marvell/octeontx2/af/cgx.c | 2 +- drivers/net/ethernet/marvell/octeontx2/af/mbox.c | 43 +- drivers/net/ethernet/marvell/octeontx2/af/mbox.h | 6 + .../net/ethernet/marvell/octeontx2/af/mcs_rvu_if.c | 17 +- drivers/net/ethernet/marvell/octeontx2/af/rvu.c | 31 +- drivers/net/ethernet/marvell/octeontx2/af/rvu.h | 2 + .../net/ethernet/marvell/octeontx2/af/rvu_cgx.c | 20 +- .../ethernet/marvell/octeontx2/nic/otx2_common.c | 2 +- .../ethernet/marvell/octeontx2/nic/otx2_common.h | 2 +- .../net/ethernet/marvell/octeontx2/nic/otx2_pf.c | 119 ++- .../net/ethernet/marvell/octeontx2/nic/otx2_vf.c | 71 +- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 7 +- drivers/net/ethernet/mediatek/mtk_ppe.c | 18 +- .../net/ethernet/netronome/nfp/flower/lag_conf.c | 5 + drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c | 2 +- drivers/net/phy/dp83822.c | 37 +- drivers/net/phy/phy_device.c | 6 +- drivers/net/usb/smsc95xx.c | 5 + drivers/net/usb/sr9800.c | 4 +- drivers/net/veth.c | 18 - drivers/net/vmxnet3/vmxnet3_xdp.c | 6 +- drivers/net/wireguard/receive.c | 6 +- drivers/net/wireless/ath/ath10k/wmi-tlv.c | 4 + drivers/net/wireless/ath/ath11k/mac.c | 17 +- drivers/net/wireless/ath/ath12k/core.h | 2 +- drivers/net/wireless/ath/ath12k/dbring.c | 2 +- drivers/net/wireless/ath/ath12k/debug.c | 2 +- drivers/net/wireless/ath/ath12k/dp_tx.c | 2 +- drivers/net/wireless/ath/ath12k/hal.c | 6 +- drivers/net/wireless/ath/ath12k/hal.h | 2 +- drivers/net/wireless/ath/ath12k/hal_rx.c | 2 +- drivers/net/wireless/ath/ath12k/hif.h | 2 +- drivers/net/wireless/ath/ath12k/hw.c | 2 +- drivers/net/wireless/ath/ath12k/hw.h | 2 +- drivers/net/wireless/ath/ath12k/mac.c | 6 +- drivers/net/wireless/ath/ath12k/mac.h | 2 +- drivers/net/wireless/ath/ath12k/mhi.c | 2 +- drivers/net/wireless/ath/ath12k/pci.c | 2 +- drivers/net/wireless/ath/ath12k/pci.h | 2 +- drivers/net/wireless/ath/ath12k/peer.h | 2 +- drivers/net/wireless/ath/ath12k/qmi.c | 2 +- drivers/net/wireless/ath/ath12k/qmi.h | 2 +- drivers/net/wireless/ath/ath12k/reg.c | 6 +- drivers/net/wireless/ath/ath12k/reg.h | 2 +- drivers/net/wireless/ath/ath12k/rx_desc.h | 2 +- drivers/net/wireless/ath/ath12k/wmi.c | 2 +- drivers/net/wireless/ath/ath9k/htc.h | 2 +- drivers/net/wireless/ath/ath9k/htc_drv_init.c | 4 + drivers/net/wireless/ath/ath9k/htc_drv_txrx.c | 4 - drivers/net/wireless/ath/ath9k/wmi.c | 10 +- drivers/net/wireless/broadcom/b43/b43.h | 16 + drivers/net/wireless/broadcom/b43/dma.c | 4 +- drivers/net/wireless/broadcom/b43/main.c | 16 +- drivers/net/wireless/broadcom/b43/pio.c | 6 +- .../broadcom/brcm80211/brcmfmac/cfg80211.c | 3 + .../broadcom/brcm80211/brcmsmac/phy/phy_cmn.c | 3 +- .../broadcom/brcm80211/brcmsmac/phy_shim.c | 5 +- .../broadcom/brcm80211/brcmsmac/phy_shim.h | 2 +- drivers/net/wireless/intel/iwlwifi/fw/acpi.c | 12 +- drivers/net/wireless/intel/iwlwifi/fw/acpi.h | 2 +- drivers/net/wireless/intel/iwlwifi/fw/pnvm.c | 30 +- drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c | 6 + drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c | 2 +- drivers/net/wireless/intel/iwlwifi/mvm/d3.c | 12 +- drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 25 +- drivers/net/wireless/intel/iwlwifi/mvm/mld-key.c | 18 +- drivers/net/wireless/intel/iwlwifi/mvm/mld-mac.c | 2 +- drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 26 +- drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 81 +- drivers/net/wireless/marvell/libertas/cmd.c | 13 +- drivers/net/wireless/marvell/mwifiex/debugfs.c | 3 - drivers/net/wireless/mediatek/mt76/mt7921/pci.c | 1 + .../net/wireless/mediatek/mt76/mt792x_acpi_sar.c | 26 +- drivers/net/wireless/mediatek/mt76/mt792x_core.c | 1 + drivers/net/wireless/mediatek/mt76/mt792x_dma.c | 2 + drivers/net/wireless/mediatek/mt76/mt7996/init.c | 7 +- drivers/net/wireless/mediatek/mt76/mt7996/mac.c | 53 +- drivers/net/wireless/mediatek/mt76/mt7996/mcu.c | 18 +- drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h | 3 +- drivers/net/wireless/microchip/wilc1000/cfg80211.c | 12 +- drivers/net/wireless/microchip/wilc1000/hif.c | 40 +- drivers/net/wireless/microchip/wilc1000/netdev.c | 38 +- drivers/net/wireless/microchip/wilc1000/spi.c | 6 +- .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 1 + drivers/net/wireless/realtek/rtw88/main.c | 2 - drivers/net/wireless/realtek/rtw88/phy.c | 3 + drivers/net/wireless/realtek/rtw88/rtw8821c.c | 2 +- drivers/net/wireless/realtek/rtw88/usb.c | 40 + drivers/net/wireless/silabs/wfx/sta.c | 15 +- drivers/ntb/core.c | 8 +- drivers/nvme/host/core.c | 6 +- drivers/nvme/host/fabrics.h | 7 - drivers/opp/debugfs.c | 6 +- drivers/pci/controller/pcie-brcmstb.c | 2 +- drivers/pci/endpoint/functions/pci-epf-vntb.c | 6 +- drivers/pci/p2pdma.c | 2 +- drivers/pci/pci.h | 5 - drivers/pci/pcie/dpc.c | 2 +- drivers/pci/quirks.c | 1 + drivers/pci/switch/switchtec.c | 4 +- drivers/perf/arm-cmn.c | 11 + drivers/perf/cxl_pmu.c | 10 +- drivers/perf/riscv_pmu_sbi.c | 8 +- drivers/pinctrl/mediatek/pinctrl-mt8186.c | 1 - drivers/pinctrl/mediatek/pinctrl-mt8192.c | 1 - drivers/pinctrl/nomadik/pinctrl-nomadik.c | 6 +- drivers/pinctrl/renesas/core.c | 4 +- drivers/pinctrl/renesas/pfc-r8a779g0.c | 14 + drivers/platform/x86/p2sb.c | 25 +- drivers/platform/x86/x86-android-tablets/other.c | 4 +- drivers/pmdomain/qcom/rpmhpd.c | 1 - drivers/powercap/dtpm_cpu.c | 2 +- drivers/pwm/pwm-atmel-hlcdc.c | 2 +- drivers/pwm/pwm-sti.c | 11 +- drivers/regulator/max5970-regulator.c | 8 +- drivers/regulator/userspace-consumer.c | 1 + drivers/remoteproc/stm32_rproc.c | 6 +- drivers/rtc/Kconfig | 3 +- drivers/rtc/lib_test.c | 2 +- drivers/s390/block/dasd.c | 55 +- drivers/scsi/bfa/bfa.h | 9 +- drivers/scsi/bfa/bfa_core.c | 4 +- drivers/scsi/bfa/bfa_ioc.h | 8 +- drivers/scsi/bfa/bfad_bsg.c | 11 +- drivers/scsi/csiostor/csio_defs.h | 18 +- drivers/scsi/csiostor/csio_lnode.c | 8 +- drivers/scsi/csiostor/csio_lnode.h | 13 - drivers/scsi/mpt3sas/mpt3sas_base.c | 4 +- drivers/soc/fsl/dpio/dpio-service.c | 2 +- drivers/soc/microchip/Kconfig | 2 +- drivers/soc/qcom/llcc-qcom.c | 2 + drivers/soc/qcom/pmic_glink_altmode.c | 16 +- drivers/soc/qcom/socinfo.c | 2 +- drivers/spi/spi-fsl-lpspi.c | 8 +- drivers/spi/spi-imx.c | 4 +- drivers/spi/spi-intel-pci.c | 1 + drivers/spi/spi-mt65xx.c | 22 +- drivers/staging/greybus/light.c | 8 +- drivers/staging/media/imx/imx-media-csc-scaler.c | 1 + drivers/staging/media/sunxi/cedrus/cedrus_h265.c | 10 +- drivers/thermal/mediatek/lvts_thermal.c | 4 +- drivers/thermal/qoriq_thermal.c | 12 +- drivers/tty/serial/8250/8250_exar.c | 5 +- drivers/tty/serial/max310x.c | 2 +- drivers/tty/serial/samsung_tty.c | 5 +- drivers/tty/vt/vt.c | 2 +- drivers/usb/gadget/udc/net2272.c | 2 +- drivers/usb/phy/phy-generic.c | 7 + drivers/vdpa/mlx5/net/mlx5_vnet.c | 13 +- drivers/vdpa/vdpa_sim/vdpa_sim.c | 3 +- drivers/video/backlight/da9052_bl.c | 1 + drivers/video/backlight/ktz8866.c | 6 +- drivers/video/backlight/lm3630a_bl.c | 15 +- drivers/video/backlight/lm3639_bl.c | 1 + drivers/video/backlight/lp8788_bl.c | 1 + drivers/virtio/virtio_ring.c | 6 +- drivers/watchdog/starfive-wdt.c | 9 +- drivers/watchdog/stm32_iwdg.c | 3 + drivers/xen/events/events_base.c | 22 +- drivers/xen/evtchn.c | 6 + fs/afs/dir.c | 10 - fs/btrfs/block-rsv.c | 2 +- fs/btrfs/block-rsv.h | 32 + fs/btrfs/space-info.c | 26 +- fs/ceph/file.c | 23 +- fs/erofs/data.c | 4 +- fs/erofs/fscache.c | 20 +- fs/erofs/internal.h | 3 +- fs/erofs/super.c | 50 +- fs/ext2/ext2.h | 2 +- fs/ext2/super.c | 2 +- fs/ext4/ext4.h | 2 +- fs/ext4/super.c | 2 +- fs/f2fs/checkpoint.c | 5 +- fs/f2fs/compress.c | 43 +- fs/f2fs/data.c | 73 +- fs/f2fs/dir.c | 5 +- fs/f2fs/f2fs.h | 109 +- fs/f2fs/file.c | 94 +- fs/f2fs/gc.c | 7 +- fs/f2fs/inode.c | 57 +- fs/f2fs/namei.c | 25 +- fs/f2fs/node.c | 20 +- fs/f2fs/recovery.c | 33 +- fs/f2fs/segment.c | 25 +- fs/f2fs/segment.h | 17 +- fs/f2fs/super.c | 17 +- fs/fcntl.c | 12 +- fs/fhandle.c | 2 +- fs/iomap/buffered-io.c | 18 +- fs/jfs/jfs_incore.h | 2 +- fs/jfs/super.c | 2 +- fs/nfs/flexfilelayout/flexfilelayout.c | 2 +- fs/nfs/fscache.c | 9 +- fs/nfs/nfs42.h | 7 +- fs/nfs/nfs4proc.c | 16 +- fs/nfs/nfsroot.c | 4 +- fs/nfs/pnfs_nfs.c | 44 +- fs/ocfs2/inode.h | 2 +- fs/ocfs2/super.c | 2 +- fs/overlayfs/params.c | 330 +++--- fs/overlayfs/params.h | 1 + fs/overlayfs/super.c | 5 +- fs/pstore/inode.c | 76 +- fs/quota/dquot.c | 159 +-- fs/reiserfs/reiserfs.h | 2 +- fs/reiserfs/super.c | 2 +- fs/select.c | 2 +- fs/smb/client/file.c | 295 +++--- include/drm/drm_fixed.h | 5 +- include/drm/drm_kunit_helpers.h | 2 + include/dt-bindings/clock/r8a779g0-cpg-mssr.h | 1 + include/linux/blkdev.h | 10 + include/linux/dm-io.h | 3 +- include/linux/f2fs_fs.h | 1 + include/linux/filter.h | 21 +- include/linux/fs.h | 11 +- include/linux/io_uring.h | 10 +- include/linux/io_uring_types.h | 3 - include/linux/mlx5/qp.h | 5 +- include/linux/moduleloader.h | 8 + include/linux/pci.h | 5 + include/linux/poll.h | 4 - include/linux/rcupdate.h | 31 + include/linux/shmem_fs.h | 2 +- include/linux/workqueue.h | 35 +- include/net/bluetooth/hci.h | 2 - include/net/bluetooth/hci_core.h | 1 + include/net/bluetooth/hci_sync.h | 2 +- include/net/bluetooth/l2cap.h | 42 - include/soc/qcom/qcom-spmi-pmic.h | 2 +- include/sound/tas2781.h | 5 + init/main.c | 5 +- io_uring/filetable.c | 11 +- io_uring/io_uring.c | 161 +-- io_uring/io_uring.h | 1 - io_uring/net.c | 260 ++--- io_uring/poll.c | 4 +- io_uring/rsrc.c | 169 +--- io_uring/rsrc.h | 15 - kernel/bpf/core.c | 7 +- kernel/bpf/cpumap.c | 3 + kernel/bpf/devmap.c | 11 +- kernel/bpf/hashtab.c | 14 +- kernel/bpf/helpers.c | 4 +- kernel/bpf/stackmap.c | 9 +- kernel/module/main.c | 9 +- kernel/printk/printk.c | 29 + kernel/rcu/tree.c | 3 + kernel/rcu/tree_exp.h | 25 +- kernel/sched/fair.c | 16 +- kernel/time/time_test.c | 2 +- kernel/time/timekeeping.c | 24 +- kernel/workqueue.c | 755 +++++++++++--- lib/cmdline_kunit.c | 2 +- lib/kunit/executor_test.c | 2 +- lib/memcpy_kunit.c | 4 +- lib/test_blackhole_dev.c | 3 +- mm/shmem.c | 2 +- net/bluetooth/Kconfig | 8 - net/bluetooth/Makefile | 1 - net/bluetooth/a2mp.c | 1054 ------------------- net/bluetooth/a2mp.h | 154 --- net/bluetooth/af_bluetooth.c | 10 +- net/bluetooth/amp.c | 590 ----------- net/bluetooth/amp.h | 60 -- net/bluetooth/eir.c | 29 +- net/bluetooth/hci_conn.c | 6 +- net/bluetooth/hci_core.c | 126 ++- net/bluetooth/hci_event.c | 43 +- net/bluetooth/hci_request.c | 2 +- net/bluetooth/hci_sync.c | 41 +- net/bluetooth/l2cap_core.c | 1069 +------------------- net/bluetooth/l2cap_sock.c | 18 +- net/bluetooth/mgmt.c | 101 +- net/bluetooth/msft.c | 23 +- net/bluetooth/rfcomm/core.c | 2 +- net/core/dev.c | 5 +- net/core/scm.c | 2 +- net/core/skbuff.c | 8 + net/core/sock_diag.c | 10 +- net/devlink/port.c | 2 +- net/hsr/hsr_framereg.c | 4 + net/hsr/hsr_main.c | 15 +- net/ipv4/inet_diag.c | 6 +- net/ipv4/inet_hashtables.c | 2 +- net/ipv4/inet_timewait_sock.c | 41 +- net/ipv4/ip_tunnel.c | 15 +- net/ipv4/ipmr.c | 4 +- net/ipv4/raw.c | 1 + net/ipv4/tcp.c | 4 +- net/ipv4/tcp_minisocks.c | 4 - net/ipv4/udp.c | 4 +- net/ipv6/fib6_rules.c | 6 + net/ipv6/mcast.c | 1 - net/iucv/iucv.c | 4 +- net/kcm/kcmsock.c | 3 +- net/l2tp/l2tp_ppp.c | 4 +- net/mac80211/rate.c | 3 +- net/mctp/route.c | 3 + net/netfilter/nf_tables_api.c | 29 +- net/netfilter/nft_set_pipapo.c | 5 +- net/packet/af_packet.c | 4 +- net/rds/send.c | 5 +- net/sched/sch_taprio.c | 3 +- net/sunrpc/addr.c | 4 +- net/sunrpc/auth_gss/gss_krb5_mech.c | 11 +- net/sunrpc/auth_gss/gss_rpc_xdr.c | 27 +- net/unix/garbage.c | 2 +- net/unix/scm.c | 4 +- net/x25/af_x25.c | 4 +- net/xfrm/xfrm_device.c | 3 +- net/xfrm/xfrm_output.c | 6 +- net/xfrm/xfrm_policy.c | 4 +- scripts/clang-tools/gen_compile_commands.py | 2 +- scripts/kconfig/lexer.l | 7 +- sound/core/seq/seq_midi.c | 8 +- sound/core/seq/seq_virmidi.c | 9 +- sound/pci/hda/patch_realtek.c | 64 ++ sound/pci/hda/tas2781_hda_i2c.c | 62 +- sound/soc/amd/acp/acp-sof-mach.c | 14 +- sound/soc/amd/yc/acp6x-mach.c | 28 + sound/soc/codecs/cs42l43.c | 5 +- sound/soc/codecs/rt5645.c | 10 + sound/soc/codecs/tas2781-comlib.c | 15 + sound/soc/codecs/tlv320adc3xxx.c | 4 +- sound/soc/codecs/wm8962.c | 29 +- sound/soc/intel/boards/bytcr_rt5640.c | 12 + sound/soc/meson/aiu.c | 19 +- sound/soc/meson/aiu.h | 1 - sound/soc/meson/axg-tdm-interface.c | 29 +- sound/soc/meson/t9015.c | 20 +- sound/soc/rockchip/rockchip_i2s_tdm.c | 352 +------ sound/soc/sh/rz-ssi.c | 2 +- sound/soc/sof/amd/acp.c | 28 +- sound/soc/sof/ipc3-loader.c | 2 + sound/soc/sof/ipc4-pcm.c | 13 +- sound/usb/stream.c | 5 +- tools/bpf/bpftool/prog.c | 2 +- tools/bpf/resolve_btfids/main.c | 70 +- tools/include/linux/btf_ids.h | 9 + tools/lib/bpf/bpf.h | 2 +- tools/lib/bpf/libbpf.c | 4 + tools/lib/bpf/libbpf_internal.h | 14 + tools/lib/bpf/netlink.c | 4 +- tools/objtool/check.c | 12 + tools/perf/Makefile.perf | 2 +- tools/perf/builtin-record.c | 35 +- tools/perf/builtin-top.c | 1 + tools/perf/util/data.c | 2 - tools/perf/util/evlist.c | 25 + tools/perf/util/evlist.h | 1 + tools/perf/util/evsel.c | 1 - tools/perf/util/expr.c | 20 +- tools/perf/util/pmu.c | 19 +- tools/perf/util/print-events.c | 27 +- tools/perf/util/srcline.c | 2 + tools/perf/util/stat-display.c | 2 +- tools/perf/util/stat-shadow.c | 7 +- tools/perf/util/thread_map.c | 2 +- .../selftests/bpf/bpf_testmod/bpf_testmod.c | 9 + .../selftests/bpf/prog_tests/lwt_redirect.c | 1 + .../testing/selftests/bpf/prog_tests/tc_redirect.c | 407 +++++--- .../testing/selftests/bpf/progs/test_map_in_map.c | 26 + tools/testing/selftests/bpf/test_maps.c | 6 +- tools/testing/selftests/net/forwarding/config | 35 + .../net/forwarding/vxlan_bridge_1d_ipv6.sh | 4 +- .../net/forwarding/vxlan_bridge_1q_ipv6.sh | 4 +- .../selftests/net/openvswitch/openvswitch.sh | 13 + .../testing/selftests/net/openvswitch/ovs-dpctl.py | 71 +- tools/testing/selftests/net/tls.c | 8 +- 711 files changed, 6443 insertions(+), 7107 deletions(-)
Aaron Conole (1):
selftests: openvswitch: Add validation for the recursion test
Abel Vesa (1):
arm64: dts: qcom: sm8550: Fix SPMI channels size
Abhinav Kumar (1):
drm/msm/dpu: fix the programming of INTF_CFG2_DATA_HCTL_EN
Adam Butcher (1):
spi: spi-imx: fix off-by-one in mx51 CPU mode burst length
Adam Guerin (1):
crypto: qat - avoid division by zero
Adam Skladowski (1):
dt-bindings: msm: qcom, mdss: Include ommited fam-b compatible
Ajay Singh (2):
wifi: wilc1000: do not realloc workqueue everytime an interface is added
wifi: wilc1000: fix multi-vif management when deleting a vif
Al Raj Hassain (1):
ASoC: amd: yc: Add HP Pavilion Aero Laptop 13-be2xxx(8BD6) into DMI quirk table
Al Viro (1):
erofs: fix handling kern_mount() failure
Alban Boyé (1):
ASoC: Intel: bytcr_rt5640: Add an extra entry for the Chuwi Vi8 tablet
Alex Bee (1):
drm/rockchip: inno_hdmi: Fix video timing
Alexander Gordeev (1):
net/iucv: fix the allocation size of iucv_path_table array
Alexander Stein (2):
media: tc358743: register v4l2 async device only after successful setup
media: i2c: imx290: Fix IMX920 typo
Alexander Sverdlin (1):
spi: lpspi: Avoid potential use-after-free in probe()
Alexander Usyskin (1):
mei: gsc_proxy: match component when GSC is on different bus
Alexandre Ghiti (1):
riscv: Fix compilation error with FAST_GUP and rv32
Alexey I. Froloff (1):
ACPI: resource: Do IRQ override on Lunnen Ground laptops
Alexey Kodanev (1):
RDMA/rtrs-clt: Check strnlen return len in sysfs mpath_policy_store()
Alexis Lothoré (4):
wifi: wilc1000: fix declarations ordering
wifi: wilc1000: fix RCU usage in connect path
wifi: wilc1000: prevent use-after-free on vif when cleaning up all interfaces
wifi: wilc1000: revert reset line logic flip
Alison Schofield (2):
cxl/region: Handle endpoint decoders in cxl_region_find_decoder() cxl/region: Allow out of order assembly of autodiscovered regions
Amir Goldstein (4):
ovl: remove unused code in lowerdir param parsing
ovl: store and show the user provided lowerdir mount option
ovl: refactor layer parsing helpers
ovl: add support for appending lowerdirs one by one
Anastasia Belova (1):
cpufreq: brcmstb-avs-cpufreq: add check for cpufreq_cpu_get's return value
Andre Przywara (1):
firmware: arm_scmi: Fix double free in SMC transport cleanup path
Andre Werner (1):
net: smsc95xx: add support for SYS TEC USB-SPEmodule1
Andrejs Cainikovs (1):
arm64: dts: ti: k3-am62-main: disable usb lpm
Andrew Ballance (1):
gen_compile_commands: fix invalid escape sequence warning
Andrew Davis (1):
arm64: dts: ti: k3-am64: Enable SDHCI nodes at the board level
Andrey Grafin (2):
libbpf: Apply map_set_def_max_entries() for inner_maps on creation selftest/bpf: Add map_in_maps with BPF_MAP_TYPE_PERF_EVENT_ARRAY values
Andrey Skvortsov (2):
Bluetooth: hci_h5: Add ability to allocate memory for private data
Bluetooth: btrtl: fix out of bounds memory access
Andrii Nakryiko (2):
libbpf: Fix faccessat() usage on Android
libbpf: Add missing LIBBPF_API annotation to libbpf_set_memlock_rlim API
Andy Shevchenko (1):
serial: 8250_exar: Don't remove GPIO device on suspend
AngeloGioacchino Del Regno (1):
drm/mediatek: dsi: Fix DSI RGB666 formats and definitions
Ard Biesheuvel (3):
x86/sme: Fix memory encryption setting if enabled by default and not overridden x86/efistub: Clear decompressor BSS in native EFI entrypoint x86/efistub: Don't clear BSS twice in mixed mode
Armin Wolf (1):
ACPI: processor_idle: Fix memory leak in acpi_processor_power_exit()
Arnaldo Carvalho de Melo (1):
perf bpf: Clean up the generated/copied vmlinux.h
Arnaud Pouliquen (2):
remoteproc: stm32: Fix incorrect type in assignment for va
remoteproc: stm32: Fix incorrect type assignment returned by stm32_rproc_get_loaded_rsc_tablef
Arnd Bergmann (11):
fs/select: rework stack allocation hack for clang
cpufreq: qcom-hw: add CONFIG_COMMON_CLK dependency
wifi: brcmsmac: avoid function pointer casts
media: pvrusb2: fix pvr2_stream_callback casts
crypto: arm/sha - fix function cast warnings
mtd: rawnand: lpc32xx_mlc: fix irq handler prototype
media: dvb-frontends: avoid stack overflow warnings with clang
media: mediatek: vcodec: avoid -Wcast-function-type-strict warning
scsi: csiostor: Avoid function pointer casts
scsi: bfa: Fix function pointer type mismatch for hcb_qe->cbfn
soc: fsl: dpio: fix kcalloc() argument order
Artem Savkov (1):
selftests/bpf: Fix potential premature unload in bpf_testmod
Arthur Grillo (1):
drm: Fix drm_fixp2int_round() making it add 0.5
Arınç ÜNAL (3):
net: dsa: mt7530: prevent possible incorrect XTAL frequency selection
net: dsa: mt7530: fix link-local frames that ingress vlan filtering ports
net: dsa: mt7530: fix handling of all link-local frames
Asad Kamal (1):
drm/amd/pm: Fix esm reg mask use to get pcie speed
Athaariq Ardhiansyah (1):
ALSA: hda/realtek: fix ALC285 issues on HP Envy x360 laptops
Attila Tőkés (1):
ASoC: amd: yc: Fix non-functional mic on Lenovo 82UU
Audra Mitchell (1):
workqueue.c: Increase workqueue name length
Babu Moger (2):
x86/resctrl: Remove hard-coded memory bandwidth limit x86/resctrl: Read supported bandwidth sources from CPUID
Baochen Qiang (1):
wifi: ath11k: initialize rx_mcs_80 and rx_mcs_160 before use
Baokun Li (1):
erofs: fix lockdep false positives on initializing erofs_pseudo_mnt
Bart Van Assche (1):
fs: Fix rw_hint validation
Bartosz Golaszewski (1):
Bluetooth: hci_qca: don't use IS_ERR_OR_NULL() with gpiod_get_optional()
Baruch Siach (1):
mtd: maps: physmap-core: fix flash size larger than 32-bit
Basavaraj Natikar (2):
HID: amd_sfh: Update HPD sensor structure elements
HID: amd_sfh: Avoid disabling the interrupt
Ben Wolsieffer (1):
watchdog: stm32_iwdg: initialize default timeout
Benjamin Lin (2):
wifi: mt76: mt7996: fix incorrect interpretation of EHT MCS caps
wifi: mt76: mt7996: fix HIF_TXD_V2_1 value
Bert Karwatzki (1):
iommu: Fix compilation without CONFIG_IOMMU_INTEL
Bhavya Kapoor (4):
arm64: dts: ti: k3-j7200-common-proc-board: Modify Pinmux for wkup_uart0 and mcu_uart0
arm64: dts: ti: k3-j7200-common-proc-board: Remove clock-frequency from mcu_uart0
arm64: dts: ti: k3-j721s2-common-proc-board: Remove Pinmux for CTS and RTS in wkup_uart0
arm64: dts: ti: k3-j784s4-evm: Remove Pinmux for CTS and RTS in wkup_uart0
Bitterblue Smith (3):
wifi: rtw88: 8821cu: Fix firmware upload fail
wifi: rtw88: 8821c: Fix beacon loss and disconnect
wifi: rtw88: 8821c: Fix false alarm count
Bjorn Andersson (2):
pmdomain: qcom: rpmhpd: Drop SA8540P gfx.lvl
arm64: dts: qcom: sa8540p: Drop gfx.lvl as power-domain for gpucc
Breno Leitao (1):
net: blackhole_dev: fix build warning for ethh set but not used
Bryan O'Donoghue (1):
clk: Fix clk_core_get NULL dereference
Changbin Du (1):
modules: wait do_free_init correctly
Chao Yu (19):
f2fs: compress: fix to guarantee persisting compressed blocks by CP
f2fs: compress: fix to cover normal cluster write with cp_rwsem
f2fs: delete obsolete FI_FIRST_BLOCK_WRITTEN
f2fs: delete obsolete FI_DROP_CACHE
f2fs: introduce get_dnode_addr() to clean up codes
f2fs: update blkaddr in __set_data_blkaddr() for cleanup
f2fs: compress: fix to avoid inconsistence bewteen i_blocks and dnode
f2fs: fix to remove unnecessary f2fs_bug_on() to avoid panic
f2fs: zone: fix to wait completion of last bio in zone correctly
f2fs: compress: fix to cover f2fs_disable_compressed_file() w/ i_sem
f2fs: fix to avoid potential panic during recovery
f2fs: fix to create selinux label during whiteout initialization
f2fs: compress: fix to check zstd compress level correctly in mount option
f2fs: compress: fix to check compress flag w/ .i_sem lock
f2fs: fix to use correct segment type in f2fs_allocate_data_block()
f2fs: ro: compress: fix to avoid caching unaligned extent
f2fs: introduce f2fs_invalidate_internal_cache() for cleanup
f2fs: fix to truncate meta inode pages forcely
f2fs: zone: fix to remove pow2 check condition for zoned block device
Charles Keepax (1):
ASoC: cs42l43: Handle error from devm_pm_runtime_enable
Chen Ni (2):
sr9800: Add check for usbnet_get_endpoints drm/tegra: dsi: Add missing check for of_find_device_by_node
Chen-Yu Tsai (4):
arm64: dts: allwinner: h6: Add RX DMA channel for SPDIF
pinctrl: mediatek: Drop bogus slew rate register range for MT8186
pinctrl: mediatek: Drop bogus slew rate register range for MT8192
clk: mediatek: mt8183: Correct parent of CLK_INFRA_SSPM_32K_SELF
Christian König (1):
drm/ttm/tests: depend on UML || COMPILE_TEST
Christoph Hellwig (1):
iomap: clear the per-folio dirty bits on all writeback failures
Christophe JAILLET (17):
mmc: wmt-sdmmc: remove an incorrect release_mem_region() call in the .remove function drm/tegra: dsi: Fix some error handling paths in tegra_dsi_probe()
drm/tegra: dsi: Fix missing pm_runtime_disable() in the error handling path of tegra_dsi_probe() drm/tegra: hdmi: Fix some error handling paths in tegra_hdmi_probe()
drm/tegra: rgb: Fix some error handling paths in tegra_dc_rgb_probe()
drm/tegra: rgb: Fix missing clk_put() in the error handling paths of tegra_dc_rgb_probe() drm/tegra: output: Fix missing i2c_put_adapter() in the error handling paths of tegra_output_probe() PCI/P2PDMA: Fix a sleeping issue in a RCU read section
PCI: switchtec: Fix an error handling path in switchtec_pci_probe()
clk: hisilicon: hi3519: Release the correct number of gates in hi3519_clk_unregister()
clk: hisilicon: hi3559a: Fix an erroneous devm_kfree()
clk: mediatek: mt8135: Fix an error handling path in clk_mt8135_apmixed_probe()
clk: mediatek: mt7622-apmixedsys: Fix an error handling path in clk_mt8135_apmixed_probe() perf pmu: Fix a potential memory leak in perf_pmu__lookup()
net: sunrpc: Fix an off by one in rpc_sockaddr2uaddr()
NFS: Fix an off by one in root_nfs_cat()
thermal/drivers/mediatek/lvts_thermal: Fix a memory leak in an error handling path
Christophe Leroy (1):
powerpc: Force inlining of arch_vmap_p{u/m}d_supported()
Chun-Yi Lee (1):
aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts
Chunguang Xu (1):
nvme: fix reconnection fail due to reserved tag allocation
Colin Ian King (1):
usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin
Conor Dooley (1):
riscv: dts: sifive: add missing #interrupt-cells to pmic
Craig Tatlor (1):
ARM: dts: qcom: msm8974: correct qfprom node size
Cristian Ciocaltea (2):
ASoC: amd: acp: Add missing error handling in sof-mach
ASoC: SOF: amd: Fix memory leak in amd_sof_acp_probe()
Damian Muszynski (1):
crypto: qat - fix ring to service map for dcc in 4xxx
Dan Carpenter (5):
io_uring/net: fix overflow check in io_recvmsg_mshot_prep()
Bluetooth: msft: __hci_cmd_sync() doesn't return NULL
ASoC: SOF: Add some bounds checking to firmware data
bus: mhi: ep: check the correct variable in mhi_ep_register_controller()
staging: greybus: fix get_channel_from_mode() failure path
Daniel Borkmann (2):
selftests/bpf: De-veth-ize the tc_redirect test case selftests/bpf: Add netkit to tc_redirect selftest
Daniel Gabay (1):
wifi: iwlwifi: mvm: use correct address 3 in A-MSDU
Daniel Golle (3):
clk: mediatek: mt7981-topckgen: flag SGM_REG_SEL as critical
net: mediatek: mtk_eth_soc: clear MAC_MCR_FORCE_LINK only when MAC is up
net: ethernet: mtk_eth_soc: fix PPE hanging issue
Daniel Lezcano (1):
powercap: dtpm_cpu: Fix error check against freq_qos_add_request()
Daniel Thompson (3):
backlight: da9052: Fully initialize backlight_properties during probe
backlight: lm3639: Fully initialize backlight_properties during probe
backlight: lp8788: Fully initialize backlight_properties during probe
Daniil Dulov (2):
media: go7007: add check of return value of go7007_read_addr()
media: pvrusb2: remove redundant NULL check
Dave Airlie (1):
nouveau: reset the bo resource bus info after an eviction
Dave Wysochanski (1):
NFS: Fix nfs_netfs_issue_read() xarray locking for writeback interrupt
David Gow (5):
kunit: test: Log the correct filter string in executor_test lib/cmdline: Fix an invalid format specifier in an assertion msg
lib: memcpy_kunit: Fix an invalid format specifier in an assertion msg
time: test: Fix incorrect format specifier
rtc: test: Fix invalid format specifier.
David Heidelberg (1):
arm64: dts: qcom: sdm845-oneplus-common: improve DAI node naming
David Howells (3):
cifs: Don't use certain unnecessary folio_*() functions
cifs: Fix writeback data corruption
afs: Revert "afs: Hide silly-rename files from userspace"
David McFarland (1):
ACPI: resource: Add Infinity laptops to irq1_edge_low_force_override
Deren Wu (1):
wifi: mt76: mt7921e: fix use-after-free in free_irq()
Devarsh Thakkar (2):
arm64: dts: ti: Add common1 register space for AM65x SoC
arm64: dts: ti: Add common1 register space for AM62x SoC
Dmitry Baryshkov (4):
soc: qcom: socinfo: rename PM2250 to PM4125
arm64: dts: qcom: qcm2290: declare VLS CLAMP register for USB3 PHY
arm64: dts: qcom: sm6115: declare VLS CLAMP register for USB3 PHY
drm: ci: use clk_ignore_unused for apq8016
Douglas Anderson (1):
drm/panel: boe-tv101wum-nl6: make use of prepare_prev_first
Duanqiang Wen (1):
net: txgbe: fix clk_name exceed MAX_DEV_ID limits
Duoming Zhou (3):
wifi: brcm80211: handle pmk_op allocation failure
nfp: flower: handle acti_netdevs allocation failure
clk: zynq: Prevent null pointer dereference caused by kmalloc failure
Dylan Hung (1):
i3c: dw: Disable IBI IRQ depends on hot-join and SIR enabling
Edward Adam Davis (1):
media: pvrusb2: fix uaf in pvr2_context_set_notify
Emmanuel Grumbach (2):
wifi: iwlwifi: mvm: fix the TLC command after ADD_STA
wifi: iwlwifi: mvm: don't set the MFP flag for the GTK
Eric Dumazet (7):
sock_diag: annotate data-races around sock_diag_handlers[family]
inet_diag: annotate data-races around inet_diag_table[]
ipv6: mcast: remove one synchronize_net() barrier in ipv6_mc_down()
net: ip_tunnel: make sure to pull inner header in ip_tunnel_rcv()
tcp: Fix NEW_SYN_RECV handling in inet_twsk_purge() net/sched: taprio: proper TCA_TAPRIO_TC_ENTRY_INDEX check
packet: annotate data-races around ignore_outgoing
Ethan Zhao (2):
PCI: Make pci_dev_is_disconnected() helper public for other drivers iommu/vt-d: Don't issue ATS Invalidation request when device is disconnected
Eugen Hristev (2):
arm64: dts: mediatek: mt8192: fix vencoder clock name
arm64: dts: mediatek: mt8186: fix VENC power domain clocks
Ezra Buehler (1):
mtd: spinand: esmt: Extend IDs to 5 bytes
Fedor Pchelkin (1):
drm/tegra: put drm_gem_object ref on error in tegra_fb_create
Fei Shao (1):
spi: spi-mt65xx: Fix NULL pointer access in interrupt handler
Fei Wu (1):
perf: RISCV: Fix panic on pmu overflow handler
Felix Fietkau (1):
wifi: mac80211: only call drv_sta_rc_update for uploaded stations
Felix Maurer (1):
hsr: Handle failures in module init
Filipe Manana (2):
btrfs: fix data races when accessing the reserved amount of block reserves
btrfs: fix data race at btrfs_use_block_rsv() when accessing block reserve
Frederic Weisbecker (2):
rcu/exp: Fix RCU expedited parallel grace period kworker allocation failure recovery rcu/exp: Handle RCU expedited grace period kworker allocation failure
Frieder Schrempf (7):
arm64: dts: imx8mm-kontron: Disable pullups for I2C signals on OSM-S i.MX8MM
arm64: dts: imx8mm-kontron: Disable pullups for I2C signals on SL/BL i.MX8MM
arm64: dts: imx8mm-kontron: Disable pullups for onboard UART signals on BL OSM-S board
arm64: dts: imx8mm-kontron: Disable pullups for onboard UART signals on BL board
arm64: dts: imx8mm-kontron: Disable pull resistors for SD card signals on BL OSM-S board
arm64: dts: imx8mm-kontron: Disable pull resistors for SD card signals on BL board
arm64: dts: imx8mm-kontron: Fix interrupt for RTC on OSM-S i.MX8MM module
Frédéric Danis (2):
Bluetooth: mgmt: Fix limited discoverable off timeout
Bluetooth: Fix eir name length
Gabor Juhos (3):
clk: qcom: gcc-ipq5018: fix 'enable_reg' offset of 'gcc_gmac0_sys_clk'
clk: qcom: gcc-ipq5018: fix 'halt_reg' offset of 'gcc_pcie1_pipe_clk'
clk: qcom: gcc-ipq5018: fix register offset for GCC_UBI0_AXI_ARES reset
Gabriel Krisman Bertazi (2):
ovl: Always reject mounting over case-insensitive directories
io_uring: Fix release of pinned pages when __io_uaddr_map fails
Gavrilov Ilia (6):
tcp: fix incorrect parameter validation in the do_tcp_getsockopt() function
ipmr: fix incorrect parameter validation in the ip_mroute_getsockopt() function
l2tp: fix incorrect parameter validation in the pppol2tp_getsockopt() function
udp: fix incorrect parameter validation in the udp_lib_getsockopt() function
net: kcm: fix incorrect parameter validation in the kcm_getsockopt) function net/x25: fix incorrect parameter validation in the x25_getsockopt() function
Geert Uytterhoeven (12):
soc: microchip: Fix POLARFIRE_SOC_SYS_CTRL input prompt
ARM: dts: renesas: rcar-gen2: Add missing #interrupt-cells to DA9063 nodes
ARM: dts: renesas: r8a73a4: Fix external clocks and clock rate
arm64: dts: renesas: r8a779g0: Restore sort order
arm64: dts: renesas: r8a779g0: Add missing SCIF_CLK2
ARM: dts: arm: realview: Fix development chip ROM compatible value
arm64: dts: renesas: r8a779a0: Correct avb[01] reg sizes
arm64: dts: renesas: r8a779g0: Correct avb[01] reg sizes
pinctrl: renesas: r8a779g0: Add missing SCIF_CLK2 pin group/function
clk: renesas: r8a779g0: Correct PFC/GPIO parent clocks
clk: renesas: r8a779f0: Correct PFC/GPIO parent clock
pinctrl: renesas: Allow the compiler to optimize away sh_pfc_pm
Gen Xu (1):
wifi: mt76: mt792x: fix ethtool warning
George Stark (1):
leds: aw2013: Unlock mutex before destroying it
Gergo Koteles (7):
ALSA: hda/tas2781: use dev_dbg in system_resume
ALSA: hda/tas2781: add lock to system_suspend
ALSA: hda/tas2781: do not reset cur_* values in runtime_suspend
ALSA: hda/tas2781: add ptrs to calibration functions
ALSA: hda/tas2781: do not call pm_runtime_force_* in system_resume/suspend
ALSA: hda/tas2781: configure the amp after firmware load
ALSA: hda/tas2781: restore power state after system_resume
Giovanni Cabiddu (1):
crypto: qat - move adf_cfg_services
Greg Joyce (1):
block: sed-opal: handle empty atoms when parsing response
Hans de Goede (3):
platform/x86: p2sb: On Goldmont only cache P2SB and SPI devfn BAR
ASoC: rt5645: Make LattePanda board DMI match more precise platform/x86: x86-android-tablets: Fix acer_b1_750_goodix_gpios name
Harry Wentland (2):
drm: Don't treat 0 as -1 in drm_fixp2int_ceil drm/vkms: Avoid reading beyond LUT array
Heiko Carstens (1):
s390/cache: prevent rebuild of shared_cpu_list
Heiko Stuebner (3):
arm64: dts: rockchip: add missing interrupt-names for rk356x vdpu
arm64: dts: rockchip: fix reset-names for rk356x i2s2 controller
arm64: dts: rockchip: drop rockchip,trcm-sync-tx-only from rk3588 i2s
Hojin Nam (1):
perf: CXL: fix CPMU filter value mask length
Hongyu Jin (1):
dm io: Support IO priority
Hou Tao (2):
x86/mm: Move is_vsyscall_vaddr() into asm/vsyscall.h x86/mm: Disallow vsyscall page read for copy_from_kernel_nofault()
Howard Hsu (1):
wifi: mt76: mt7996: fix HE beamformer phy cap for station vif
Hsin-Te Yuan (1):
arm64: dts: mt8195-cherry-tomato: change watchdog reset boot flow
Hsin-Yi Wang (2):
drm/panel-edp: use put_sync in unprepare
drm/mediatek: Fix a null pointer crash in mtk_drm_crtc_finish_page_flip
Hugo Villeneuve (1):
serial: max310x: fix syntax error in IRQ error message
Ian Abbott (1):
comedi: comedi_test: Prevent timers rescheduling during deletion
Ian Rogers (5):
perf pmu: Treat the msr pmu as software
perf srcline: Add missed addr2line closes
perf expr: Fix "has_event" function for metric style events perf stat: Avoid metric-only segv
perf metric: Don't remove scale from counts
Ido Schimmel (2):
selftests: forwarding: Add missing multicast routing config entries
selftests: forwarding: Fix ping failure due to short timeout
Ignat Korchagin (1):
net: veth: do not manipulate GRO when using XDP
Igor Prusov (1):
clk: meson: Add missing clocks to axg_clk_regmaps
Ilan Peer (1):
wifi: iwlwifi: mvm: Fix the listener MAC filter flags
Ilkka Koskinen (1):
perf/arm-cmn: Workaround AmpereOneX errata AC04_MESH_1 (incorrect child count)
Ilpo Järvinen (1):
PCI/DPC: Print all TLP Prefixes, not just the first
Jaegeuk Kim (1):
f2fs: check number of blocks in a current section
Jai Luthra (1):
arm64: dts: ti: k3-am62p: Fix memory ranges for DMSS
Jakub Kicinski (1):
selftests: tls: use exact comparison in recv_partial
James Clark (1):
coresight: Fix issue where a source device's helpers aren't disabled
Jan Höppner (1):
s390/dasd: Use dev_*() for device log messages
Jan Kara (4):
block: Provide bdev_open_* functions
erofs: Convert to use bdev_open_by_path()
quota: Fix rcu annotations of inode dquot pointers
quota: Properly annotate i_dquot arrays with __rcu
Jeff Johnson (1):
wifi: ath12k: Update Qualcomm Innovation Center, Inc. copyrights
Jeff LaBundy (1):
Input: iqs7222 - add support for IQS7222D v1.1 and v1.2
Jens Axboe (7):
io_uring/unix: drop usage of io_uring socket
io_uring: drop any code related to SCM_RIGHTS
io_uring: remove looping around handling traditional task_work
io_uring: remove unconditional looping in local task_work handling io_uring/net: unify how recvmsg and sendmsg copy in the msghdr io_uring/net: move receive multishot out of the generic msghdr path
io_uring: don't save/restore iowait state
Jeremy Kerr (1):
net: mctp: copy skb ext data when fragmenting
Jernej Skrabec (4):
media: cedrus: h265: Fix configuring bitstream size
media: sun8i-di: Fix coefficient writes
media: sun8i-di: Fix power on/off sequences
media: sun8i-di: Fix chroma difference threshold
Jerome Brunet (4):
ASoC: meson: aiu: fix function pointer type mismatch
ASoC: meson: t9015: fix function pointer type mismatch
ASoC: meson: axg-tdm-interface: fix mclk setup without mclk-fs
ASoC: meson: axg-tdm-interface: add frame rate constraint
Ji Sheng Teoh (1):
watchdog: starfive: Check pm_runtime_enabled() before decrementing usage counter
Jianhua Lu (1):
backlight: ktz8866: Correct the check for of_property_read_u32
Jiawei Wang (1):
ASoC: amd: yc: Fix non-functional mic on Lenovo 21J2
Jiaxun Yang (1):
MIPS: Clear Cause.BD in instruction_pointer_set
Jie Wang (2):
net: hns3: fix port duplex configure error in IMP reset
crypto: qat - relocate and rename get_service_enabled()
Jijie Shao (1):
net: hns3: fix wrong judgment condition issue
Jinjie Ruan (1):
wifi: mwifiex: debugfs: Drop unnecessary error check for debugfs_create_dir()
Jiri Pirko (1):
devlink: fix port new reply cmd type
Jiri Slaby (SUSE) (1):
tty: vt: fix 20 vs 0x20 typo in EScsiignore
Johan Carlsson (1):
ALSA: usb-audio: Stop parsing channels bits when all channels are found.
Johan Hovold (1):
soc: qcom: pmic_glink_altmode: fix drm bridge use-after-free
Johannes Berg (7):
wifi: iwlwifi: mvm: report beacon protection failures
wifi: iwlwifi: dbg-tlv: ensure NUL termination
wifi: iwlwifi: acpi: fix WPFC reading
wifi: iwlwifi: mvm: initialize rates in FW earlier
wifi: iwlwifi: mvm: d3: fix IPN byte order
wifi: iwlwifi: mvm: fix erroneous queue index mask
wifi: iwlwifi: mvm: don't set replay counters to 0xff
John Keeping (1):
regulator: userspace-consumer: add module device table
Johnny Hsieh (1):
ASoC: amd: yc: Add Lenovo ThinkBook 21J0 into DMI quirk table
Jon Hunter (1):
memory: tegra: Correct DLA client names
Jonah Palmer (1):
vdpa/mlx5: Allow CVQ size changes
Jonas Dreßler (3):
Bluetooth: Remove HCI_POWER_OFF_TIMEOUT
Bluetooth: mgmt: Remove leftover queuing of power_off work
Bluetooth: Remove superfluous call to hci_conn_check_pending()
Jonathan Bell (1):
PCI: brcmstb: Fix broken brcm_pcie_mdio_write() polling
Jorge Mora (2):
NFSv4.2: fix nfs4_listxattr kernel BUG at mm/usercopy.c:102 NFSv4.2: fix listxattr maximum XDR buffer size
Josef Bacik (1):
nfs: fix panic when nfs4_ff_layout_prepare_ds() fails
Josh Poimboeuf (1):
objtool: Fix UNWIND_HINT_{SAVE,RESTORE} across basic blocks
Judith Mendez (1):
arm64: dts: ti: k3-am64-main: Fix ITAP/OTAP values for MMC
Juergen Gross (2):
xen/evtchn: avoid WARN() when unbinding an event channel xen/events: increment refcnt only if event channel is refcounted
Julien Massot (2):
media: cadence: csi2rx: use match fwnode for media link
media: v4l2: cci: print leading 0 on error
Jérôme Pouiller (1):
wifi: wfx: fix memory leak when starting AP
Jörg Wedekind (1):
PCI: Mark 3ware-9650SE Root Port Extended Tags as broken
Kailang Yang (1):
ALSA: hda/realtek - ALC285 reduce pop noise from Headphone port
Kajol Jain (1):
powerpc/hv-gpci: Fix the H_GET_PERF_COUNTER_INFO hcall return value checks
Kamal Heib (1):
net: ena: Remove ena_select_queue
Kan Liang (1):
perf top: Uniform the event name for the hybrid machine
Kang Yang (1):
wifi: ath12k: fix incorrect logic of calculating vdev_stats_id
Kees Cook (3):
pstore: inode: Convert mutex usage to guard(mutex)
pstore: inode: Only d_invalidate() is needed x86, relocs: Ignore relocations in .notes section
Keisuke Nishimura (2):
sched/fair: Take the scheduling domain into account in select_idle_smt() sched/fair: Take the scheduling domain into account in select_idle_core()
Konrad Dybcio (12):
arm64: dts: qcom: sc8180x: Hook up VDD_CX as GCC parent domain
arm64: dts: qcom: sc8180x: Fix up big CPU idle state entry latency
arm64: dts: qcom: sc8180x: Add missing CPU off state
arm64: dts: qcom: sc8180x: Fix eDP PHY power-domains
arm64: dts: qcom: sc8180x: Don't hold MDP core clock at FMAX
arm64: dts: qcom: sc8180x: Require LOW_SVS vote for MMCX if DISPCC is on
arm64: dts: qcom: sc8180x: Shrink aoss_qmp register space size
arm64: dts: qcom: sm8450: Add missing interconnects to serial
arm64: dts: qcom: sdm845: Use the Low Power Island CX/MX for SLPI
clk: qcom: reset: Commonize the de/assert functions
clk: qcom: reset: Ensure write completion on reset de/assertion
clk: qcom: dispcc-sdm845: Adjust internal GDSC wait timesKonstantin Taranov (1):
RDMA/mana_ib: Fix bug in creation of dma regions
Krzysztof Kozlowski (3):
arm64: dts: qcom: sdm845-db845c: correct PCIe wake-gpios
arm64: dts: qcom: sm8150: use 'gpios' suffix for PCI GPIOs
arm64: dts: qcom: sm8150: correct PCIe wake-gpios
Kuniyuki Iwashima (3):
af_unix: Annotate data-race of gc_in_progress in wait_for_unix_gc().
rds: tcp: Fix use-after-free of net in reqsk_timer_handler().
tcp: Fix refcnt handling in __inet_hash_connect().
Kunwu Chan (1):
x86/xen: Add some null pointer checking to smp.c
Kévin L'hôpital (1):
net: phy: fix phy_get_internal_delay accessing an empty array
Lad Prabhakar (2):
arm64: dts: renesas: rzg2l: Add missing interrupts to IRQC nodes
ASoC: sh: rz-ssi: Fix error message print
Leon Romanovsky (2):
RDMA/mlx5: Fix fortify source warning while accessing Eth segment
xfrm: Allow UDP encapsulation only in offload modes
Li Nan (1):
md: Don't clear MD_CLOSING when the raid is about to stop
Linu Cherian (1):
octeontx2-af: Use matching wake_up API variant in CGX command interface
Liu Ying (1):
arm64: dts: imx8mp-evk: Fix hdmi@3d node
Luca Ceresoli (1):
ASoC: rockchip: i2s-tdm: Fix inaccurate sampling rates
Luca Weiss (2):
backlight: lm3630a: Initialize backlight_properties on init
backlight: lm3630a: Don't set bl->props.brightness in get_brightness
Lucas Stach (1):
media: imx: csc/scaler: fix v4l2_ctrl_handler memory leak
Luiz Augusto von Dentz (8):
Bluetooth: Remove BT_HS
Bluetooth: hci_event: Fix not indicating new connection for BIG Sync
Bluetooth: hci_core: Cancel request on command timeout
Bluetooth: hci_sync: Fix overwriting request callback
Bluetooth: hci_core: Fix possible buffer overflow
Bluetooth: msft: Fix memory leak
Bluetooth: btusb: Fix memory leak
Bluetooth: af_bluetooth: Fix deadlock
Luoyouming (1):
RDMA/hns: Fix mis-modifying default congestion control algorithm
Maciej Strozek (2):
mfd: cs42l43: Fix wrong register defaults
mfd: cs42l43: Fix wrong GPIO_FN_SEL and SPI_CLK_CONFIG1 defaults
Manorit Chawdhry (2):
arm64: dts: ti: k3-j721s2: Fix power domain for VTM node
arm64: dts: ti: k3-j784s4: Fix power domain for VTM node
Manu Bretelle (1):
selftests/bpf: Disable IPv6 for lwt_redirect test
Manuel Fombuena (1):
HID: multitouch: Add required quirk for Synaptics 0xcddc device
Mao Jinlong (1):
coresight: etm4x: Set skip_power_up in etm4_init_arch_data function
Marek Vasut (1):
arm64: dts: imx8mp: Set SPI NOR to max 40 MHz on Data Modul i.MX8M Plus eDM SBC
Marijn Suijten (1):
drm/msm/dpu: Only enable DSC_MODE_MULTIPLEX if dsc_merge is enabled
Mario Limonciello (2):
iommu/amd: Mark interrupt as managed
crypto: ccp - Avoid discarding errors in psp_send_platform_access_msg()
Mark Brown (2):
regmap: kunit: Ensure that changed bytes are actually different arm64/sve: Lower the maximum allocation for the SVE ptrace regset
Mark Rutland (1):
perf print-events: make is_event_supported() more robust
Markus Schneider-Pargmann (1):
can: m_can: Start/Cancel polling timer together with interrupts
Martin KaFai Lau (2):
selftests/bpf: Fix the flaky tc_redirect_dtime test selftests/bpf: Wait for the netstamp_needed_key static key to be turned on
Martin Kaiser (1):
gpio: vf610: allow disabling the vf610 driver
Martin Kaistra (1):
wifi: rtl8xxxu: add cancel_work_sync() for c2hcmd_work
Martin Krastev (1):
drm/vmwgfx: Fix vmw_du_get_cursor_mob fencing of newly-created MOBs
Masahiro Yamada (1):
kconfig: fix infinite loop when expanding a macro at the end of file
Matthew Wilcox (Oracle) (1):
smb: do not test the return value of folio_start_writeback()
Matti Vaittinen (1):
iio: gts-helper: Fix division loop
Max Kellermann (1):
parisc/ftrace: add missing CONFIG_DYNAMIC_FTRACE check
Maxim Kudinov (1):
ACPI: resource: Add MAIBENBEN X577 to irq1_edge_low_force_override
Maxime Ripard (1):
drm/tests: helpers: Include missing drm_drv header
Mete Durlu (1):
s390/vtime: fix average steal time calculation
Michael Ellerman (1):
powerpc/embedded6xx: Fix no previous prototype for avr_uart_send() etc.
Michael Roth (1):
x86/mm: Ensure input to pfn_to_kaddr() is treated as a 64-bit type
Michal Vokáč (2):
ARM: dts: imx6dl-yapp4: Fix typo in the QCA switch register address
ARM: dts: imx6dl-yapp4: Move the internal switch PHYs under the switch node
Mika Westerberg (1):
spi: intel-pci: Add support for Lunar Lake-M SPI serial flash
Mike Yu (2):
xfrm: fix xfrm child route lookup for packet offload
xfrm: set skb control buffer based on packet offload as well
Mikhail Khvainitski (1):
HID: lenovo: Add middleclick_workaround sysfs knob for cptkbd
Mikulas Patocka (4):
dm-verity, dm-crypt: align "struct bvec_iter" correctly
dm: call the resume method on internal suspend
dm-integrity: fix a memory leak when rechecking the data
dm-integrity: align the outgoing bio in integrity_recheck
Ming Lei (1):
dm raid: fix false positive for requeue needed during reshape
Ming Yen Hsieh (1):
wifi: mt76: mt792x: fix a potential loading failure of the 6Ghz channel config from ACPI
Miri Korenblit (3):
wifi: iwlwifi: fix EWRD table validity check
wifi: iwlwifi: read BIOS PNVM only for non-Intel SKU
wifi: iwlwifi: support EHT for WH
Miroslav Franc (1):
s390/dasd: fix double module refcount decrement
Muhammad Usama Anjum (1):
io_uring/net: correct the type of variable
Mustafa Ismail (1):
RDMA/irdma: Remove duplicate assignment
Naresh Solanki (1):
regulator: max5970: Fix regulator child node name
Nathan Chancellor (1):
s390/vdso: drop '-fPIC' from LDFLAGS
Navid Emamdoost (1):
nbd: null check for nla_nest_start
Nikita Kiryushin (1):
net: phy: fix phy_read_poll_timeout argument type in genphy_loopback
Nikita Zhandarovich (5):
do_sys_name_to_handle(): use kzalloc() to fix kernel-infoleak
media: em28xx: annotate unchecked call to media_device_register() drm/radeon/ni: Fix wrong firmware size logging in ni_init_microcode() drm/amd/display: fix NULL checks for adev->dm.dc in amdgpu_dm_fini()
wireguard: receive: annotate data-race around receiving_counter.counter
Nishanth Menon (2):
arm64: dts: ti: k3-am642-evm: Add boot phase tags marking
arm64: dts: ti: k3-am642-sk: Add boot phase tags marking
Nícolas F. R. A. Prado (6):
cpufreq: mediatek-hw: Wait for CPU supplies before probing
cpufreq: mediatek-hw: Don't error out if supply is not found
arm64: dts: mt8183: Move CrosEC base detection node to kukui-based DTs
arm64: dts: mediatek: mt8192-asurada: Remove CrosEC base detection node
arm64: dts: mediatek: mt8186: Add missing clocks to ssusb power domains
arm64: dts: mediatek: mt8186: Add missing xhci clock to usb controllers
Olga Kornievskaia (1):
NFSv4.1/pnfs: fix NFS with TLS in pnfs
Ondrej Jirman (1):
leds: sgm3140: Add missing timer cleanup and flash gpio control
Pablo Neira Ayuso (2):
netfilter: nft_set_pipapo: release elements in clone only from destroy path
netfilter: nf_tables: do not compare internal table flags on updates
Paloma Arellano (1):
drm/msm/dpu: add division of drm_display_mode's hskew parameter
Pauli Virtanen (1):
Bluetooth: fix use-after-free in accessing skb after sending it
Pavel Begunkov (1):
io_uring: fix poll_remove stalled req completion
Peng Fan (1):
thermal/drivers/qoriq: Fix getting tmu range
Perry Yuan (1):
ACPI: CPPC: enable AMD CPPC V2 support for family 17h processors
Peter Chiu (1):
wifi: mt76: mt7996: fix TWT issues
Peter Griffin (2):
mfd: syscon: Call of_node_put() only when of_parse_phandle() takes a ref
mfd: altera-sysmgr: Call of_node_put() only when of_parse_phandle() takes a ref
Peter Hilber (3):
timekeeping: Fix cross-timestamp interpolation on counter wrap
timekeeping: Fix cross-timestamp interpolation corner case decision
timekeeping: Fix cross-timestamp interpolation for non-x86
Peter Robinson (2):
bus: tegra-aconnect: Update dependency to ARCH_TEGRA
dmaengine: tegra210-adma: Update dependency to ARCH_TEGRA
Peter Ujfalusi (1):
ASoC: SOF: ipc4-pcm: Workaround for crashed firmware on system suspend
Petr Machata (1):
selftests: forwarding: Add missing config entries
Petr Mladek (1):
printk: Disable passing console lock owner completely during panic()
Petre Rodan (1):
iio: pressure: mprls0025pa fix off-by-one enum
Prike Liang (1):
drm/amdgpu: Enable gpu reset for S3 abort cases on Raven series
Przemek Kitszel (1):
ice: fix stats being updated by way too large values
Puranjay Mohan (1):
bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes()
Qiheng Lin (1):
powerpc/pseries: Fix potential memleak in papr_get_attr()
Quan Tian (1):
netfilter: nf_tables: Fix a memory leak in nf_tables_updchain
Quanyang Wang (1):
crypto: xilinx - call finalize with bh disabled
Quentin Schulz (2):
drm/rockchip: lvds: do not overwrite error code drm/rockchip: lvds: do not print scary message when probing defer
Rafael J. Wysocki (1):
ACPI: scan: Fix device check notification handling
Rafał Miłecki (9):
arm64: dts: mediatek: mt7986: fix reference to PWM in fan node
arm64: dts: mediatek: mt7986: drop crypto's unneeded/invalid clock name
arm64: dts: mediatek: mt7986: fix SPI bus width properties
arm64: dts: mediatek: mt7986: fix SPI nodename
arm64: dts: mediatek: mt7986: drop "#clock-cells" from PWM
arm64: dts: mediatek: mt7986: add "#reset-cells" to infracfg
arm64: dts: mediatek: mt7622: add missing "device_type" to memory nodes
arm64: dts: marvell: reorder crypto interrupts on Armada SoCs
arm64: dts: broadcom: bcmbca: bcm4908: drop invalid switch cells
Rahul Rameshbabu (4):
wifi: b43: Stop/wake correct queue in DMA Tx path when QoS is disabled
wifi: b43: Stop/wake correct queue in PIO Tx path when QoS is disabled
wifi: b43: Stop correct queue in DMA worker when QoS is disabled
wifi: b43: Disable QoS for bcm4331
Raj Kumar Bhagat (1):
wifi: ath12k: fix fetching MCBC flag for QCN9274
Randy Dunlap (3):
drivers/ps3: select VIDEO to provide cmdline functions
crypto: jitter - fix CRYPTO_JITTERENTROPY help text
rtc: mt6397: select IRQ_DOMAIN instead of depending on it
Ranjan Kumar (1):
scsi: mpt3sas: Prevent sending diag_reset when the controller is ready
Rob Herring (4):
arm: dts: Fix dtc interrupt_provider warnings
arm64: dts: Fix dtc interrupt_provider warnings
arm: dts: Fix dtc interrupt_map warnings
arm64: dts: qcom: Fix interrupt-map cell sizes
Sakari Ailus (1):
media: ivsc: csi: Swap SINK and SOURCE pads
Sam Protsenko (1):
clk: samsung: exynos850: Propagate SPI IPCLK rate change
Sam Ravnborg (1):
sparc32: Fix section mismatch in leon_pci_grpci
Sandipan Das (1):
perf/x86/amd/core: Avoid register reset when CPU is dead
Sasha Levin (1):
Linux 6.6.23
Saurabh Sengar (2):
x86/hyperv: Allow 15-bit APIC IDs for VTL platforms x86/hyperv: Use per cpu initial stack for vtl context
Sean Anderson (1):
usb: phy: generic: Get the vbus supply
Sebastian Reichel (1):
arm64: dts: rockchip: mark system power controller on rk3588-evb1
Sheng Yong (1):
f2fs: compress: fix to check unreleased compressed cluster
Shengjiu Wang (1):
clk: imx: imx8mp: Fix SAI_MCLK_SEL definition
Shifeng Li (1):
RDMA/device: Fix a race between mad_client and cm_client init
Shigeru Yoshida (1):
hsr: Fix uninit-value access in hsr_get_node()
Shiming Cheng (1):
ipv6: fib6_rules: flush route cache when rule is changed
Sibi Sankar (1):
cpufreq: Fix per-policy boost behavior on SoCs using cpufreq_boost_set_sw()
Srinivasan Shanmugam (5):
drm/amd/display: Fix a potential buffer overflow in 'dp_dsc_clock_en_read()' drm/amd/display: Fix potential NULL pointer dereferences in 'dcn10_set_output_transfer_func()' drm/amdgpu: Fix potential out-of-bounds access in 'amdgpu_discovery_reg_base_init()' drm/amd/display: Add 'replay' NULL check in 'edp_set_replay_allow_active()' drm/amdgpu: Fix missing break in ATOM_ARG_IMM Case of atom_get_src_int()
Sriram R (1):
wifi: ath12k: Fix issues in channel list update
StanleyYP Wang (1):
wifi: mt76: mt7996: fix efuse reading issue
Stephen Boyd (2):
gpiolib: Pass consumer device through to core in devm_fwnode_gpiod_get_index()
arm64: ftrace: Don't forbid CALL_OPS+CC_OPTIMIZE_FOR_SIZE with Clang
Steve Sistare (1):
vdpa_sim: reset must not run
Stuart Henderson (3):
ASoC: wm8962: Enable oscillator if selecting WM8962_FLL_OSC
ASoC: wm8962: Enable both SPKOUTR_ENA and SPKOUTL_ENA in mono mode
ASoC: wm8962: Fix up incorrect error message in wm8962_set_fll
Subbaraya Sundeep (5):
octeontx2: Detect the mbox up or down message via register
octeontx2-pf: Wait till detach_resources msg is complete
octeontx2-pf: Use default max_active works instead of one
octeontx2-pf: Send UP messages to VF only when VF is up.
octeontx2-af: Use separate handlers for interrupts
Takashi Iwai (1):
ALSA: seq: fix function cast warnings
Takashi Sakamoto (1):
firewire: core: use long bus reset on gap count error
Tejun Heo (9):
workqueue: Move pwq->max_active to wq->max_active
workqueue: Factor out pwq_is_empty()
workqueue: Replace pwq_activate_inactive_work() with [__]pwq_activate_work()
workqueue: Move nr_active handling into helpers
workqueue: Make wq_adjust_max_active() round-robin pwqs while activating
workqueue: RCU protect wq->dfl_pwq and implement accessors for it
workqueue: Introduce struct wq_node_nr_active
workqueue: Implement system-wide nr_active enforcement for unbound workqueues
workqueue: Don't call cpumask_test_cpu() with -1 CPU in wq_update_node_max_active()
Thierry Reding (1):
arm64: tegra: Set the correct PHY mode for MGBE
Thinh Tran (1):
net/bnx2x: Prevent access to a freed page in page_pool
Thomas Richter (1):
s390/pai: fix attr_event_free upper limit for pai device drivers
Théo Lebrun (1):
gpio: nomadik: fix offset bug in nmk_pmx_set()
Tiezhu Yang (1):
bpftool: Silence build warning about calloc()
Tim Harvey (1):
arm64: dts: imx8mm-venice-gw71xx: fix USB OTG VBUS
Tim Pambor (1):
net: phy: dp83822: Fix RGMII TX delay configuration
Tobias Brunner (1):
ipv4: raw: Fix sending packets from raw sockets via IPsec tunnels
Toke Høiland-Jørgensen (5):
wifi: ath9k: delay all of ath9k_wmi_event_tasklet() until init is complete
libbpf: Use OPTS_SET() macro in bpf_xdp_query()
bpf: Fix DEVMAP_HASH overflow check on 32-bit arches
bpf: Fix hashtab overflow check on 32-bit arches
bpf: Fix stackmap overflow check on 32-bit arches
Tomi Valkeinen (3):
media: rkisp1: Fix IRQ handling due to shared interrupts drm/tidss: Fix initial plane zpos values drm/tidss: Fix sync-lost issue with two displays
Tony Luck (1):
x86/resctrl: Implement new mba_MBps throttling heuristic
Tudor Ambarus (1):
tty: serial: samsung: fix tx_empty() to return TIOCSER_TEMT
Unnathi Chalicheemala (1):
soc: qcom: llcc: Check return value on Broadcast_OR reg read
Uwe Kleine-König (5):
ARM: dts: rockchip: Drop interrupts property from pwm-rockchip nodes
Input: gpio_keys_polled - suppress deferred probe error for gpio
pwm: atmel-hlcdc: Fix clock imbalance related to suspend support
pwm: sti: Fix capture for st,pwm-num-chan < st,capture-num-chan
ASoC: tlv320adc3xxx: Don't strip remove function when driver is builtin
Viktor Malik (2):
tools/resolve_btfids: Refactor set sorting with types from btf_ids.h tools/resolve_btfids: Fix cross-compilation to non-host endianness
Vinicius Costa Gomes (2):
igc: Fix missing time sync events
igb: Fix missing time sync events
Viresh Kumar (1):
OPP: debugfs: Fix warning around icc_get_name()
Wang Jianjian (1):
quota: Fix potential NULL pointer dereference
Wen Gong (1):
wifi: ath11k: change to move WMI_VDEV_PARAM_SET_HEMU_MODE before WMI_PEER_ASSOC_CMDID
Wenjie Qi (1):
f2fs: fix NULL pointer dereference in f2fs_submit_page_write()
William Kucharski (1):
RDMA/srpt: Do not register event handler until srpt device is fully setup
William Tu (1):
vmxnet3: Fix missing reserved tailroom
Xingyuan Mo (1):
wifi: ath10k: fix NULL pointer dereference in ath10k_wmi_tlv_op_pull_mgmt_tx_compl_ev()
Xiubo Li (1):
ceph: stop copying to iter at EOF on sync reads
Xiuhong Wang (2):
f2fs: compress: relocate some judgments in f2fs_reserve_compress_blocks
f2fs: compress: fix reserve_cblocks counting error when out of space
Xuan Zhuo (1):
virtio: packed: fix unmap leak for indirect desc table
Yan Zhai (3):
rcu: add a helper to report consolidated flavor QS
net: report RCU QS on threaded NAPI repolling
bpf: report RCU QS in cpumap kthread
Yang Jihong (5):
perf record: Fix possible incorrect free in record__switch_output()
perf record: Check conflict between '--timestamp-filename' option and pipe mode before recording perf evsel: Fix duplicate initialization of data->id in evsel__parse_sample() perf thread_map: Free strlist on normal path in thread_map__new_by_tid_str()
hwtracing: hisi_ptt: Move type check to the beginning of hisi_ptt_pmu_event_init()
Yang Yingliang (1):
NTB: fix possible name leak in ntb_register_device()
Yewon Choi (1):
rds: introduce acquire/release ordering in acquire/release_in_xmit()
Yishai Hadas (1):
RDMA/mlx5: Relax DEVX access upon modify commands
Yonghong Song (1):
bpf: Mark bpf_spin_{lock,unlock}() helpers with notrace correctly
Yonglong Liu (1):
net: hns3: fix kernel crash when 1588 is received on HIP08 devices
Yuxuan Hu (1):
Bluetooth: rfcomm: Fix null-ptr-deref in rfcomm_check_security
Zhang Shurong (1):
drm/tegra: dpaux: Fix PM disable depth imbalance in tegra_dpaux_probe
Zhipeng Lu (10):
wifi: libertas: fix some memleaks in lbs_allocate_cmd_buffer()
SUNRPC: fix a memleak in gss_import_v2_context
SUNRPC: fix some memleaks in gssx_dec_option_array drm/vmwgfx: fix a memleak in vmw_gmrid_man_get_node drm/lima: fix a memleak in lima_heap_alloc
media: v4l2-tpg: fix some memleaks in tpg_alloc
media: v4l2-mem2mem: fix a memleak in v4l2_m2m_register_entity
media: edia: dvbdev: fix a use-after-free
media: go7007: fix a memleak in go7007_load_encoder
media: ttpci: fix two memleaks in budget_av_attach
-----BEGIN PGP SIGNATURE-----
iQIzBAEBCgAdFiEE4n5dijQDou9mhzu83qZv95d3LNwFAmYDTkAACgkQ3qZv95d3 LNyzJA/+OUP3QOn13XfHREPK1iF8/Pmuucq/ETQzwVSqSt+mcoKkjDZ4LxfzgLzw 9iwztv9jqEAsDxIv2a7f+K/Q2Mrsjr7INF6nNQwAnQqZKO0oKQ0HxYnmqGlff0YC Fk1q9RCW9wTHe8YSV6HGBbKEkfynk7U4iK6Ia6U+ARtAt/lnIQadLbkrIFpcBQFc 4bg5febiMYSRZMWtwPjGm+naWbhAVn1PDvHIkKURphwShfn5rc9XHRsMRf2UdPc6 QA+4yyigBYJfE08kcn5/StNw2I79HYiwPWcP8bh578WGWVcSbffodf/tQuvAO+Cn tRoAjE5HdBITkqPlpTEwW7wwT/mOKihuoQeCjEy+Q5wZVbJmJJ4VCcXH2H2LEs+q CKArz3JuKPxNFI0ae3XiGH0NX+Rpy1yFZe14neUVGE8eEQ99Ko2V+wqVU4FGCjh7 R9lHIB8mmWTeIEbBz35FB4vUYiVFiSbQfynmI1NpvOuuPB5O8nFcHpjgGgaqenHj OTkqiWhx44SwnkX4Io4YTkKLSa46iMnErpbNkE/kkNUI8Uw0ARWKGwYgzVulEB2Y fZHqAUxcEjBN7jK0D/NN6GlG4r2Xn6rGn3s+8+hwIc6nDjsP6asU8mauBWQ3w0jZ 7zIfHNF1jRuKJTjj3KiojD2h6xyJIPrKqj98emaOEFpF6xrDYUk= =ZRa/
-----END PGP SIGNATURE-----
Sasha Levin
maintainerDocumentation/devicetree/bindings/display/msm/qcom,mdss.yaml +1 -0
@@ -127,6 +127,7 @@ patternProperties: - qcom,dsi-phy-20nm - qcom,dsi-phy-28nm-8226 - qcom,dsi-phy-28nm-hpm + - qcom,dsi-phy-28nm-hpm-fam-b - qcom,dsi-phy-28nm-lp - qcom,hdmi-phy-8084 - qcom,hdmi-phy-8660
Documentation/filesystems/overlayfs.rst +14 -3
@@ -344,10 +344,11 @@ escaping the colons with a single backslash. For example: mount -t overlay overlay -olowerdir=/a\:lower\:\:dir /merged -Since kernel version v6.5, directory names containing colons can also -be provided as lower layer using the fsconfig syscall from new mount api: +Since kernel version v6.8, directory names containing colons can also +be configured as lower layer using the "lowerdir+" mount options and the +fsconfig syscall from new mount api. For example: - fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir", "/a:lower::dir", 0); + fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir+", "/a:lower::dir", 0); In the latter case, colons in lower layer directory names will be escaped as an octal characters (\072) when displayed in /proc/self/mountinfo.
@@ -416,6 +417,16 @@ Only the data of the files in the "data-only" lower layers may be visible when a "metacopy" file in one of the lower layers above it, has a "redirect" to the absolute path of the "lower data" file in the "data-only" lower layer. +Since kernel version v6.8, "data-only" lower layers can also be added using +the "datadir+" mount options and the fsconfig syscall from new mount api. +For example: + + fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir+", "/l1", 0); + fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir+", "/l2", 0); + fsconfig(fs_fd, FSCONFIG_SET_STRING, "lowerdir+", "/l3", 0); + fsconfig(fs_fd, FSCONFIG_SET_STRING, "datadir+", "/do1", 0); + fsconfig(fs_fd, FSCONFIG_SET_STRING, "datadir+", "/do2", 0); + fs-verity support ----------------------
Makefile +1 -1
@@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 VERSION = 6 PATCHLEVEL = 6 -SUBLEVEL = 22 +SUBLEVEL = 23 EXTRAVERSION = NAME = Hurr durr I'ma ninja sloth
arch/arm/boot/dts/amazon/alpine.dtsi +0 -1
@@ -167,7 +167,6 @@ pcie@fbc00000 { msix: msix@fbe00000 { compatible = "al,alpine-msix"; reg = <0x0 0xfbe00000 0x0 0x100000>; - interrupt-controller; msi-controller; al,msi-base-spi = <96>; al,msi-num-spis = <64>;
arch/arm/boot/dts/arm/arm-realview-pb1176.dts +1 -1
@@ -451,7 +451,7 @@ pb1176_serial3: serial@1010f000 { /* Direct-mapped development chip ROM */ pb1176_rom@10200000 { - compatible = "direct-mapped"; + compatible = "mtd-rom"; reg = <0x10200000 0x4000>; bank-width = <1>; };
arch/arm/boot/dts/aspeed/aspeed-g4.dtsi +0 -14
@@ -466,7 +466,6 @@ i2c_ic: interrupt-controller@0 { i2c0: i2c-bus@40 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x40 0x40>; compatible = "aspeed,ast2400-i2c-bus";
@@ -482,7 +481,6 @@ i2c0: i2c-bus@40 { i2c1: i2c-bus@80 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x80 0x40>; compatible = "aspeed,ast2400-i2c-bus";
@@ -498,7 +496,6 @@ i2c1: i2c-bus@80 { i2c2: i2c-bus@c0 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0xc0 0x40>; compatible = "aspeed,ast2400-i2c-bus";
@@ -515,7 +512,6 @@ i2c2: i2c-bus@c0 { i2c3: i2c-bus@100 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x100 0x40>; compatible = "aspeed,ast2400-i2c-bus";
@@ -532,7 +528,6 @@ i2c3: i2c-bus@100 { i2c4: i2c-bus@140 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x140 0x40>; compatible = "aspeed,ast2400-i2c-bus";
@@ -549,7 +544,6 @@ i2c4: i2c-bus@140 { i2c5: i2c-bus@180 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x180 0x40>; compatible = "aspeed,ast2400-i2c-bus";
@@ -566,7 +560,6 @@ i2c5: i2c-bus@180 { i2c6: i2c-bus@1c0 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x1c0 0x40>; compatible = "aspeed,ast2400-i2c-bus";
@@ -583,7 +576,6 @@ i2c6: i2c-bus@1c0 { i2c7: i2c-bus@300 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x300 0x40>; compatible = "aspeed,ast2400-i2c-bus";
@@ -600,7 +592,6 @@ i2c7: i2c-bus@300 { i2c8: i2c-bus@340 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x340 0x40>; compatible = "aspeed,ast2400-i2c-bus";
@@ -617,7 +608,6 @@ i2c8: i2c-bus@340 { i2c9: i2c-bus@380 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x380 0x40>; compatible = "aspeed,ast2400-i2c-bus";
@@ -634,7 +624,6 @@ i2c9: i2c-bus@380 { i2c10: i2c-bus@3c0 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x3c0 0x40>; compatible = "aspeed,ast2400-i2c-bus";
@@ -651,7 +640,6 @@ i2c10: i2c-bus@3c0 { i2c11: i2c-bus@400 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x400 0x40>; compatible = "aspeed,ast2400-i2c-bus";
@@ -668,7 +656,6 @@ i2c11: i2c-bus@400 { i2c12: i2c-bus@440 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x440 0x40>; compatible = "aspeed,ast2400-i2c-bus";
@@ -685,7 +672,6 @@ i2c12: i2c-bus@440 { i2c13: i2c-bus@480 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x480 0x40>; compatible = "aspeed,ast2400-i2c-bus";
arch/arm/boot/dts/aspeed/aspeed-g5.dtsi +1 -14
@@ -363,6 +363,7 @@ sgpio: sgpio@1e780200 { interrupts = <40>; reg = <0x1e780200 0x0100>; clocks = <&syscon ASPEED_CLK_APB>; + #interrupt-cells = <2>; interrupt-controller; bus-frequency = <12000000>; pinctrl-names = "default";
@@ -594,7 +595,6 @@ i2c_ic: interrupt-controller@0 { i2c0: i2c-bus@40 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x40 0x40>; compatible = "aspeed,ast2500-i2c-bus";
@@ -610,7 +610,6 @@ i2c0: i2c-bus@40 { i2c1: i2c-bus@80 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x80 0x40>; compatible = "aspeed,ast2500-i2c-bus";
@@ -626,7 +625,6 @@ i2c1: i2c-bus@80 { i2c2: i2c-bus@c0 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0xc0 0x40>; compatible = "aspeed,ast2500-i2c-bus";
@@ -643,7 +641,6 @@ i2c2: i2c-bus@c0 { i2c3: i2c-bus@100 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x100 0x40>; compatible = "aspeed,ast2500-i2c-bus";
@@ -660,7 +657,6 @@ i2c3: i2c-bus@100 { i2c4: i2c-bus@140 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x140 0x40>; compatible = "aspeed,ast2500-i2c-bus";
@@ -677,7 +673,6 @@ i2c4: i2c-bus@140 { i2c5: i2c-bus@180 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x180 0x40>; compatible = "aspeed,ast2500-i2c-bus";
@@ -694,7 +689,6 @@ i2c5: i2c-bus@180 { i2c6: i2c-bus@1c0 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x1c0 0x40>; compatible = "aspeed,ast2500-i2c-bus";
@@ -711,7 +705,6 @@ i2c6: i2c-bus@1c0 { i2c7: i2c-bus@300 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x300 0x40>; compatible = "aspeed,ast2500-i2c-bus";
@@ -728,7 +721,6 @@ i2c7: i2c-bus@300 { i2c8: i2c-bus@340 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x340 0x40>; compatible = "aspeed,ast2500-i2c-bus";
@@ -745,7 +737,6 @@ i2c8: i2c-bus@340 { i2c9: i2c-bus@380 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x380 0x40>; compatible = "aspeed,ast2500-i2c-bus";
@@ -762,7 +753,6 @@ i2c9: i2c-bus@380 { i2c10: i2c-bus@3c0 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x3c0 0x40>; compatible = "aspeed,ast2500-i2c-bus";
@@ -779,7 +769,6 @@ i2c10: i2c-bus@3c0 { i2c11: i2c-bus@400 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x400 0x40>; compatible = "aspeed,ast2500-i2c-bus";
@@ -796,7 +785,6 @@ i2c11: i2c-bus@400 { i2c12: i2c-bus@440 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x440 0x40>; compatible = "aspeed,ast2500-i2c-bus";
@@ -813,7 +801,6 @@ i2c12: i2c-bus@440 { i2c13: i2c-bus@480 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x480 0x40>; compatible = "aspeed,ast2500-i2c-bus";
arch/arm/boot/dts/aspeed/aspeed-g6.dtsi +2 -16
@@ -474,6 +474,7 @@ sgpiom0: sgpiom@1e780500 { reg = <0x1e780500 0x100>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; clocks = <&syscon ASPEED_CLK_APB2>; + #interrupt-cells = <2>; interrupt-controller; bus-frequency = <12000000>; pinctrl-names = "default";
@@ -488,6 +489,7 @@ sgpiom1: sgpiom@1e780600 { reg = <0x1e780600 0x100>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; clocks = <&syscon ASPEED_CLK_APB2>; + #interrupt-cells = <2>; interrupt-controller; bus-frequency = <12000000>; pinctrl-names = "default";
@@ -902,7 +904,6 @@ &i2c { i2c0: i2c-bus@80 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x80 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>;
@@ -917,7 +918,6 @@ i2c0: i2c-bus@80 { i2c1: i2c-bus@100 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x100 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>;
@@ -932,7 +932,6 @@ i2c1: i2c-bus@100 { i2c2: i2c-bus@180 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x180 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>;
@@ -947,7 +946,6 @@ i2c2: i2c-bus@180 { i2c3: i2c-bus@200 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x200 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>;
@@ -962,7 +960,6 @@ i2c3: i2c-bus@200 { i2c4: i2c-bus@280 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x280 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>;
@@ -977,7 +974,6 @@ i2c4: i2c-bus@280 { i2c5: i2c-bus@300 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x300 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>;
@@ -992,7 +988,6 @@ i2c5: i2c-bus@300 { i2c6: i2c-bus@380 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x380 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1007,7 +1002,6 @@ i2c6: i2c-bus@380 { i2c7: i2c-bus@400 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x400 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1022,7 +1016,6 @@ i2c7: i2c-bus@400 { i2c8: i2c-bus@480 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x480 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1037,7 +1030,6 @@ i2c8: i2c-bus@480 { i2c9: i2c-bus@500 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x500 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1052,7 +1044,6 @@ i2c9: i2c-bus@500 { i2c10: i2c-bus@580 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x580 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1067,7 +1058,6 @@ i2c10: i2c-bus@580 { i2c11: i2c-bus@600 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x600 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1082,7 +1072,6 @@ i2c11: i2c-bus@600 { i2c12: i2c-bus@680 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x680 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1097,7 +1086,6 @@ i2c12: i2c-bus@680 { i2c13: i2c-bus@700 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x700 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1112,7 +1100,6 @@ i2c13: i2c-bus@700 { i2c14: i2c-bus@780 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x780 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1127,7 +1114,6 @@ i2c14: i2c-bus@780 { i2c15: i2c-bus@800 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x800 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>;
arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi +3 -0
@@ -167,6 +167,7 @@ gpio_crmu: gpio@3024800 { #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; interrupt-parent = <&mailbox>; interrupts = <0>; };
@@ -247,6 +248,7 @@ gpio_ccm: gpio@1800a000 { gpio-controller; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; + #interrupt-cells = <2>; }; i2c1: i2c@1800b000 {
@@ -518,6 +520,7 @@ gpio_asiu: gpio@180a5000 { gpio-controller; interrupt-controller; + #interrupt-cells = <2>; interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; gpio-ranges = <&pinctrl 0 42 1>, <&pinctrl 1 44 3>,
arch/arm/boot/dts/broadcom/bcm-hr2.dtsi +1 -0
@@ -200,6 +200,7 @@ gpiob: gpio@30000 { gpio-controller; ngpios = <4>; interrupt-controller; + #interrupt-cells = <2>; interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; };
arch/arm/boot/dts/broadcom/bcm-nsp.dtsi +2 -0
@@ -180,6 +180,7 @@ gpioa: gpio@20 { gpio-controller; ngpios = <32>; interrupt-controller; + #interrupt-cells = <2>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; gpio-ranges = <&pinctrl 0 0 32>; };
@@ -352,6 +353,7 @@ gpiob: gpio@30000 { gpio-controller; ngpios = <4>; interrupt-controller; + #interrupt-cells = <2>; interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; };
arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts +2 -0
@@ -60,6 +60,8 @@ pci@c0000000 { * We have slots (IDSEL) 1 and 2 with one assigned IRQ * each handling all IRQs. */ + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = /* IDSEL 1 */ <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts +2 -0
@@ -89,6 +89,8 @@ pci@c0000000 { * The slots have Ethernet, Ethernet, NEC and MPCI. * The IDSELs are 11, 12, 13, 14. */ + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = /* IDSEL 11 - Ethernet A */ <0x5800 0 0 1 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 11 is irq 4 */
arch/arm/boot/dts/marvell/kirkwood-l-50.dts +2 -0
@@ -65,6 +65,7 @@ i2c@11000 { gpio2: gpio-expander@20 { #gpio-cells = <2>; #interrupt-cells = <2>; + interrupt-controller; compatible = "semtech,sx1505q"; reg = <0x20>;
@@ -79,6 +80,7 @@ gpio2: gpio-expander@20 { gpio3: gpio-expander@21 { #gpio-cells = <2>; #interrupt-cells = <2>; + interrupt-controller; compatible = "semtech,sx1505q"; reg = <0x21>;
arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi +2 -0
@@ -120,6 +120,7 @@ gpio0: gpio@0 { interrupts = <2 IRQ_TYPE_LEVEL_HIGH>, <3 IRQ_TYPE_LEVEL_HIGH>, <4 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; interrupt-controller; };
@@ -128,6 +129,7 @@ gpio1: gpio@1 { gpio-controller; #gpio-cells = <2>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; interrupt-controller; };
arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi +0 -1
@@ -997,7 +997,6 @@ touchscreen@41 { compatible = "st,stmpe811"; reg = <0x41>; irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; - interrupt-controller; id = <0>; blocks = <0x5>; irq-trigger = <0x1>;
arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi +0 -1
@@ -980,7 +980,6 @@ touchscreen@41 { compatible = "st,stmpe811"; reg = <0x41>; irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; - interrupt-controller; id = <0>; blocks = <0x5>; irq-trigger = <0x1>;
arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi +0 -1
@@ -861,7 +861,6 @@ touchscreen@41 { compatible = "st,stmpe811"; reg = <0x41>; irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; - interrupt-controller; id = <0>; blocks = <0x5>; irq-trigger = <0x1>;
arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi +16 -9
@@ -117,17 +117,9 @@ mdio { #address-cells = <1>; #size-cells = <0>; - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - switch@10 { compatible = "qca,qca8334"; - reg = <10>; + reg = <0x10>; reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; switch_ports: ports {
@@ -149,15 +141,30 @@ fixed-link { eth2: port@2 { reg = <2>; label = "eth2"; + phy-mode = "internal"; phy-handle = <&phy_port2>; }; eth1: port@3 { reg = <3>; label = "eth1"; + phy-mode = "internal"; phy-handle = <&phy_port3>; }; }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy_port2: ethernet-phy@1 { + reg = <1>; + }; + + phy_port3: ethernet-phy@2 { + reg = <2>; + }; + }; }; }; };
arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts +0 -3
@@ -227,7 +227,6 @@ bridge@1,0 { #address-cells = <3>; #size-cells = <2>; - #interrupt-cells = <1>; bridge@2,1 { compatible = "pci10b5,8605";
@@ -235,7 +234,6 @@ bridge@2,1 { #address-cells = <3>; #size-cells = <2>; - #interrupt-cells = <1>; /* Intel Corporation I210 Gigabit Network Connection */ ethernet@3,0 {
@@ -250,7 +248,6 @@ bridge@2,2 { #address-cells = <3>; #size-cells = <2>; - #interrupt-cells = <1>; /* Intel Corporation I210 Gigabit Network Connection */ switch_nic: ethernet@4,0 {
arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi +1 -1
@@ -245,6 +245,7 @@ pca9539: pca9539@74 { reg = <0x74>; gpio-controller; #gpio-cells = <2>; + #interrupt-cells = <2>; interrupt-controller; interrupt-parent = <&gpio2>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
@@ -390,7 +391,6 @@ pci_root: root@0,0 { #address-cells = <3>; #size-cells = <2>; - #interrupt-cells = <1>; }; };
arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi +0 -1
@@ -619,7 +619,6 @@ stmpe811@41 { blocks = <0x5>; id = <0>; interrupts = <10 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; interrupt-parent = <&gpio4>; irq-trigger = <0x1>; pinctrl-names = "default";
arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi +0 -1
@@ -543,7 +543,6 @@ stmpe811@41 { blocks = <0x5>; interrupts = <20 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&gpio6>; - interrupt-controller; id = <0>; irq-trigger = <0x1>; pinctrl-names = "default";
arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi +0 -1
@@ -225,7 +225,6 @@ da9063: pmic@58 { pinctrl-0 = <&pinctrl_pmic>; interrupt-parent = <&gpio2>; interrupts = <8 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; onkey { compatible = "dlg,da9063-onkey";
arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi +1 -0
@@ -124,6 +124,7 @@ pmic@58 { reg = <0x58>; interrupt-parent = <&gpio2>; interrupts = <9 IRQ_TYPE_LEVEL_LOW>; /* active-low GPIO2_9 */ + #interrupt-cells = <2>; interrupt-controller; regulators {
arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi +1 -0
@@ -100,6 +100,7 @@ pmic: pmic@58 { interrupt-parent = <&gpio1>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + #interrupt-cells = <2>; gpio-controller; #gpio-cells = <2>;
arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts +1 -0
@@ -63,6 +63,7 @@ pca9554: io-expander@25 { gpio-controller; #gpio-cells = <2>; #interrupt-cells = <2>; + interrupt-controller; reg = <0x25>; };
arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts +1 -0
@@ -338,6 +338,7 @@ gpio6: io-expander@22 { reg = <0x22>; gpio-controller; #gpio-cells = <2>; + #interrupt-cells = <2>; interrupt-controller; interrupt-parent = <&gpio3>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
arch/arm/boot/dts/qcom/qcom-msm8974.dtsi +1 -1
@@ -1194,7 +1194,7 @@ restart@fc4ab000 { qfprom: qfprom@fc4bc000 { compatible = "qcom,msm8974-qfprom", "qcom,qfprom"; - reg = <0xfc4bc000 0x1000>; + reg = <0xfc4bc000 0x2100>; #address-cells = <1>; #size-cells = <1>;
arch/arm/boot/dts/qcom/qcom-sdx55.dtsi +4 -4
@@ -345,10 +345,10 @@ pcie_rc: pcie@1c00000 { "msi8"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 0 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 0 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 0 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 0 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + interrupt-map = <0 0 0 1 &intc 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ clocks = <&gcc GCC_PCIE_PIPE_CLK>, <&gcc GCC_PCIE_AUX_CLK>,
arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts +12 -0
@@ -209,6 +209,18 @@ &cmt1 { status = "okay"; }; +&extal1_clk { + clock-frequency = <26000000>; +}; + +&extal2_clk { + clock-frequency = <48000000>; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + &pfc { scifa0_pins: scifa0 { groups = "scifa0_data";
arch/arm/boot/dts/renesas/r8a73a4.dtsi +6 -3
@@ -450,17 +450,20 @@ clocks { extalr_clk: extalr { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <32768>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; }; extal1_clk: extal1 { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <25000000>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; }; extal2_clk: extal2 { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <48000000>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; }; fsiack_clk: fsiack { compatible = "fixed-clock";
arch/arm/boot/dts/renesas/r8a7790-lager.dts +1 -0
@@ -437,6 +437,7 @@ pmic@58 { interrupt-parent = <&irqc0>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + #interrupt-cells = <2>; rtc { compatible = "dlg,da9063-rtc";
arch/arm/boot/dts/renesas/r8a7790-stout.dts +1 -0
@@ -332,6 +332,7 @@ pmic@58 { interrupt-parent = <&irqc0>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + #interrupt-cells = <2>; onkey { compatible = "dlg,da9063-onkey";
arch/arm/boot/dts/renesas/r8a7791-koelsch.dts +1 -0
@@ -800,6 +800,7 @@ pmic@58 { interrupt-parent = <&irqc0>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + #interrupt-cells = <2>; rtc { compatible = "dlg,da9063-rtc";
arch/arm/boot/dts/renesas/r8a7791-porter.dts +1 -0
@@ -389,6 +389,7 @@ pmic@5a { interrupt-parent = <&irqc0>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + #interrupt-cells = <2>; watchdog { compatible = "dlg,da9063-watchdog";
arch/arm/boot/dts/renesas/r8a7792-blanche.dts +1 -0
@@ -330,6 +330,7 @@ pmic@58 { interrupt-parent = <&irqc>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + #interrupt-cells = <2>; rtc { compatible = "dlg,da9063-rtc";
arch/arm/boot/dts/renesas/r8a7793-gose.dts +1 -0
@@ -735,6 +735,7 @@ pmic@58 { interrupt-parent = <&irqc0>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + #interrupt-cells = <2>; rtc { compatible = "dlg,da9063-rtc";
arch/arm/boot/dts/renesas/r8a7794-alt.dts +1 -0
@@ -458,6 +458,7 @@ pmic@58 { interrupt-parent = <&gpio3>; interrupts = <31 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + #interrupt-cells = <2>; rtc { compatible = "dlg,da9063-rtc";
arch/arm/boot/dts/renesas/r8a7794-silk.dts +1 -0
@@ -424,6 +424,7 @@ pmic@58 { interrupt-parent = <&gpio3>; interrupts = <31 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + #interrupt-cells = <2>; onkey { compatible = "dlg,da9063-onkey";
arch/arm/boot/dts/rockchip/rv1108.dtsi +0 -8
@@ -196,7 +196,6 @@ spi: spi@10270000 { pwm4: pwm@10280000 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x10280000 0x10>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; clock-names = "pwm", "pclk"; pinctrl-names = "default";
@@ -208,7 +207,6 @@ pwm4: pwm@10280000 { pwm5: pwm@10280010 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x10280010 0x10>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; clock-names = "pwm", "pclk"; pinctrl-names = "default";
@@ -220,7 +218,6 @@ pwm5: pwm@10280010 { pwm6: pwm@10280020 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x10280020 0x10>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; clock-names = "pwm", "pclk"; pinctrl-names = "default";
@@ -232,7 +229,6 @@ pwm6: pwm@10280020 { pwm7: pwm@10280030 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x10280030 0x10>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; clock-names = "pwm", "pclk"; pinctrl-names = "default";
@@ -386,7 +382,6 @@ i2c0: i2c@20000000 { pwm0: pwm@20040000 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x20040000 0x10>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>; clock-names = "pwm", "pclk"; pinctrl-names = "default";
@@ -398,7 +393,6 @@ pwm0: pwm@20040000 { pwm1: pwm@20040010 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x20040010 0x10>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>; clock-names = "pwm", "pclk"; pinctrl-names = "default";
@@ -410,7 +404,6 @@ pwm1: pwm@20040010 { pwm2: pwm@20040020 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x20040020 0x10>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>; clock-names = "pwm", "pclk"; pinctrl-names = "default";
@@ -422,7 +415,6 @@ pwm2: pwm@20040020 { pwm3: pwm@20040030 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x20040030 0x10>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>; clock-names = "pwm", "pclk"; pinctrl-names = "default";
arch/arm/boot/dts/st/stm32429i-eval.dts +0 -1
@@ -222,7 +222,6 @@ stmpe1600: stmpe1600@42 { reg = <0x42>; interrupts = <8 3>; interrupt-parent = <&gpioi>; - interrupt-controller; wakeup-source; stmpegpio: stmpe_gpio {
arch/arm/boot/dts/st/stm32mp157c-dk2.dts +0 -1
@@ -64,7 +64,6 @@ touchscreen@38 { reg = <0x38>; interrupts = <2 2>; interrupt-parent = <&gpiof>; - interrupt-controller; touchscreen-size-x = <480>; touchscreen-size-y = <800>; status = "okay";
arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts +0 -1
@@ -415,7 +415,6 @@ stmpe811@41 { reg = <0x41>; interrupts = <30 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&gpio2>; - interrupt-controller; id = <0>; blocks = <0x5>; irq-trigger = <0x1>;
arch/arm/crypto/sha256_glue.c +5 -8
@@ -24,8 +24,8 @@#include "sha256_glue.h" -asmlinkage void sha256_block_data_order(u32 *digest, const void *data, -unsigned int num_blks); +asmlinkage void sha256_block_data_order(struct sha256_state *state, +const u8 *data,int num_blks);int crypto_sha256_arm_update (struct shash_desc *desc,const u8 *data,unsigned int len)
@@ -33,23 +33,20 @@ int crypto_sha256_arm_update(struct shash_desc *desc, const u8 *data,/* make sure casting to sha256_block_fn() is safe */ BUILD_BUG_ON (offsetof(struct sha256_state , state) !=0 ); -return sha256_base_do_update (desc, data, len, - (sha256_block_fn *)sha256_block_data_order); +return sha256_base_do_update (desc, data, len, sha256_block_data_order); }EXPORT_SYMBOL (crypto_sha256_arm_update);static int crypto_sha256_arm_final (struct shash_desc *desc,u8 *out) { -sha256_base_do_finalize (desc, - (sha256_block_fn *)sha256_block_data_order); +sha256_base_do_finalize (desc, sha256_block_data_order);return sha256_base_finish (desc, out); }int crypto_sha256_arm_finup (struct shash_desc *desc,const u8 *data,unsigned int len,u8 *out) { -sha256_base_do_update (desc, data, len, - (sha256_block_fn *)sha256_block_data_order); +sha256_base_do_update (desc, data, len, sha256_block_data_order);return crypto_sha256_arm_final (desc, out); }EXPORT_SYMBOL (crypto_sha256_arm_finup);
arch/arm/crypto/sha512-glue.c +5 -7
@@ -25,27 +25,25 @@ MODULE_ALIAS_CRYPTO("sha512");MODULE_ALIAS_CRYPTO ("sha384-arm" );MODULE_ALIAS_CRYPTO ("sha512-arm" ); -asmlinkage void sha512_block_data_order(u64 *state, u8 const *src, int blocks); +asmlinkage void sha512_block_data_order(struct sha512_state *state, +u8 const *src,int blocks);int sha512_arm_update (struct shash_desc *desc,const u8 *data,unsigned int len) { -return sha512_base_do_update (desc, data, len, - (sha512_block_fn *)sha512_block_data_order); +return sha512_base_do_update (desc, data, len, sha512_block_data_order); }static int sha512_arm_final (struct shash_desc *desc,u8 *out) { -sha512_base_do_finalize (desc, - (sha512_block_fn *)sha512_block_data_order); +sha512_base_do_finalize (desc, sha512_block_data_order);return sha512_base_finish (desc, out); }int sha512_arm_finup (struct shash_desc *desc,const u8 *data,unsigned int len,u8 *out) { -sha512_base_do_update (desc, data, len, - (sha512_block_fn *)sha512_block_data_order); +sha512_base_do_update (desc, data, len, sha512_block_data_order);return sha512_arm_final (desc, out); }
arch/arm64/Kconfig +1 -1
@@ -196,7 +196,7 @@ config ARM64 if DYNAMIC_FTRACE_WITH_ARGS && DYNAMIC_FTRACE_WITH_CALL_OPS select HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS \ if (DYNAMIC_FTRACE_WITH_ARGS && !CFI_CLANG && \ - !CC_OPTIMIZE_FOR_SIZE) + (CC_IS_CLANG || !CC_OPTIMIZE_FOR_SIZE)) select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY \ if DYNAMIC_FTRACE_WITH_ARGS select HAVE_SAMPLE_FTRACE_DIRECT
arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts +2 -0
@@ -291,6 +291,8 @@ sw { }; &spdif { + pinctrl-names = "default"; + pinctrl-0 = <&spdif_tx_pin>; status = "okay"; };
arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi +2 -0
@@ -166,6 +166,8 @@ &r_ir { }; &spdif { + pinctrl-names = "default"; + pinctrl-0 = <&spdif_tx_pin>; status = "okay"; };
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +3 -4
@@ -406,6 +406,7 @@ spi1_cs_pin: spi1-cs-pin { function = "spi1"; }; + /omit-if-no-ref/ spdif_tx_pin: spdif-tx-pin { pins = "PH7"; function = "spdif";
@@ -655,10 +656,8 @@ spdif: spdif@5093000 { clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>; clock-names = "apb", "spdif"; resets = <&ccu RST_BUS_SPDIF>; - dmas = <&dma 2>; - dma-names = "tx"; - pinctrl-names = "default"; - pinctrl-0 = <&spdif_tx_pin>; + dmas = <&dma 2>, <&dma 2>; + dma-names = "rx", "tx"; status = "disabled"; };
arch/arm64/boot/dts/amazon/alpine-v2.dtsi +0 -1
@@ -145,7 +145,6 @@ pci@fbc00000 { msix: msix@fbe00000 { compatible = "al,alpine-msix"; reg = <0x0 0xfbe00000 0x0 0x100000>; - interrupt-controller; msi-controller; al,msi-base-spi = <160>; al,msi-num-spis = <160>;
arch/arm64/boot/dts/amazon/alpine-v3.dtsi +0 -1
@@ -355,7 +355,6 @@ pcie@fbd00000 { msix: msix@fbe00000 { compatible = "al,alpine-msix"; reg = <0x0 0xfbe00000 0x0 0x100000>; - interrupt-controller; msi-controller; al,msi-base-spi = <336>; al,msi-num-spis = <959>;
arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi +0 -3
@@ -227,9 +227,6 @@ ethernet-switch@0 { brcm,num-gphy = <5>; brcm,num-rgmii-ports = <2>; - #address-cells = <1>; - #size-cells = <0>; - ports: ports { #address-cells = <1>; #size-cells = <0>;
arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi +1 -0
@@ -586,6 +586,7 @@ gpio_g: gpio@660a0000 { #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>; };
arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi +1 -0
@@ -450,6 +450,7 @@ gpio_hsls: gpio@d0000 { #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; gpio-ranges = <&pinmux 0 0 16>, <&pinmux 16 71 2>,
arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts +19 -19
@@ -294,8 +294,8 @@ MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x19 pinctrl_i2c4: i2c4grp { fsl,pins = < - MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 - MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x40000083 + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x40000083 >; };
@@ -313,19 +313,19 @@ MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x19 pinctrl_uart1: uart1grp { fsl,pins = < - MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x140 - MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x140 - MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x140 - MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x140 + MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x0 + MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x0 + MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x0 + MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x0 >; }; pinctrl_uart2: uart2grp { fsl,pins = < - MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x140 - MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x140 - MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x140 - MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x140 + MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x0 + MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x0 + MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x0 + MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x0 >; };
@@ -337,40 +337,40 @@ MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x19 pinctrl_usdhc2: usdhc2grp { fsl,pins = < - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x90 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 - MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x19 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xd0 >; }; pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { fsl,pins = < - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x94 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 - MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x19 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xd0 >; }; pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { fsl,pins = < - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x96 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 - MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x19 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xd0 >; }; };
arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts +19 -19
@@ -279,8 +279,8 @@ MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x19 pinctrl_i2c4: i2c4grp { fsl,pins = < - MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 - MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x40000083 + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x40000083 >; };
@@ -292,19 +292,19 @@ MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT 0x19 pinctrl_uart1: uart1grp { fsl,pins = < - MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x140 - MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x140 - MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x140 - MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x140 + MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x0 + MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x0 + MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x0 + MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x0 >; }; pinctrl_uart2: uart2grp { fsl,pins = < - MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x140 - MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x140 - MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x140 - MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x140 + MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x0 + MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x0 + MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x0 + MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x0 >; };
@@ -316,40 +316,40 @@ MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x19 pinctrl_usdhc2: usdhc2grp { fsl,pins = < - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x90 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 - MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x19 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xd0 >; }; pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { fsl,pins = < - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x94 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 - MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x19 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xd0 >; }; pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { fsl,pins = < - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x96 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 - MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x19 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xd0 >; }; };
arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi +3 -3
@@ -210,7 +210,7 @@ rv3028: rtc@52 { reg = <0x52>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rtc>; - interrupts-extended = <&gpio4 1 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gpio4 1 IRQ_TYPE_LEVEL_LOW>; trickle-diode-disable; }; };
@@ -252,8 +252,8 @@ MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x19 pinctrl_i2c1: i2c1grp { fsl,pins = < - MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 - MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x40000083 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x40000083 >; };
arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi +2 -2
@@ -237,8 +237,8 @@ MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x19 pinctrl_i2c1: i2c1grp { fsl,pins = < - MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 - MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x40000083 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x40000083 >; };
arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi +9 -20
@@ -47,17 +47,6 @@ pps { gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; status = "okay"; }; - - reg_usb_otg1_vbus: regulator-usb-otg1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reg_usb1_en>; - compatible = "regulator-fixed"; - regulator-name = "usb_otg1_vbus"; - gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; }; /* off-board header */
@@ -145,9 +134,10 @@ &uart3 { }; &usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; dr_mode = "otg"; over-current-active-low; - vbus-supply = <®_usb_otg1_vbus>; status = "okay"; };
@@ -205,14 +195,6 @@ MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41 >; }; - pinctrl_reg_usb1_en: regusb1grp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x41 - MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x141 - MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x41 - >; - }; - pinctrl_spi2: spi2grp { fsl,pins = < MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
@@ -235,4 +217,11 @@ MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 >; }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x141 + MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x41 + >; + }; };
arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts +1 -1
@@ -121,7 +121,7 @@ &ecspi1 { flash@0 { /* W25Q128JVEI */ compatible = "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <100000000>; /* Up to 133 MHz */ + spi-max-frequency = <40000000>; spi-tx-bus-width = <1>; spi-rx-bus-width = <1>; };
arch/arm64/boot/dts/freescale/imx8mp-evk.dts +21 -12
@@ -23,7 +23,7 @@ hdmi-connector { port { hdmi_connector_in: endpoint { - remote-endpoint = <&adv7533_out>; + remote-endpoint = <&adv7535_out>; }; }; };
@@ -107,6 +107,13 @@ reg_usdhc2_vmmc: regulator-usdhc2 { enable-active-high; }; + reg_vext_3v3: regulator-vext-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VEXT_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "wm8960-audio";
@@ -342,7 +349,7 @@ BUCK4 { regulator-always-on; }; - BUCK5 { + reg_buck5: BUCK5 { regulator-name = "BUCK5"; regulator-min-microvolt = <1650000>; regulator-max-microvolt = <1950000>;
@@ -393,14 +400,16 @@ &i2c2 { hdmi@3d { compatible = "adi,adv7535"; - reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>; - reg-names = "main", "cec", "edid", "packet"; + reg = <0x3d>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; adi,dsi-lanes = <4>; - adi,input-depth = <8>; - adi,input-colorspace = "rgb"; - adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; + avdd-supply = <®_buck5>; + dvdd-supply = <®_buck5>; + pvdd-supply = <®_buck5>; + a2vdd-supply = <®_buck5>; + v3p3-supply = <®_vext_3v3>; + v1p2-supply = <®_buck5>; ports { #address-cells = <1>;
@@ -409,7 +418,7 @@ ports { port@0 { reg = <0>; - adv7533_in: endpoint { + adv7535_in: endpoint { remote-endpoint = <&dsi_out>; }; };
@@ -417,7 +426,7 @@ adv7533_in: endpoint { port@1 { reg = <1>; - adv7533_out: endpoint { + adv7535_out: endpoint { remote-endpoint = <&hdmi_connector_in>; }; };
@@ -502,7 +511,7 @@ port@1 { reg = <1>; dsi_out: endpoint { - remote-endpoint = <&adv7533_in>; + remote-endpoint = <&adv7535_in>; data-lanes = <1 2 3 4>; }; };
arch/arm64/boot/dts/lg/lg1312.dtsi +0 -1
@@ -126,7 +126,6 @@ eth0: ethernet@c1b00000 { amba { #address-cells = <2>; #size-cells = <1>; - #interrupt-cells = <3>; compatible = "simple-bus"; interrupt-parent = <&gic>;
arch/arm64/boot/dts/lg/lg1313.dtsi +0 -1
@@ -126,7 +126,6 @@ eth0: ethernet@c3700000 { amba { #address-cells = <2>; #size-cells = <1>; - #interrupt-cells = <3>; compatible = "simple-bus"; interrupt-parent = <&gic>;
arch/arm64/boot/dts/marvell/armada-37xx.dtsi +5 -5
@@ -431,14 +431,14 @@ xor11 { crypto: crypto@90000 { compatible = "inside-secure,safexcel-eip97ies"; reg = <0x90000 0x20000>; - interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "mem", "ring0", "ring1", - "ring2", "ring3", "eip"; + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ring0", "ring1", "ring2", + "ring3", "eip", "mem"; clocks = <&nb_periph_clk 15>; };
arch/arm64/boot/dts/marvell/armada-ap80x.dtsi +0 -1
@@ -138,7 +138,6 @@ pmu { odmi: odmi@300000 { compatible = "marvell,odmi-controller"; - interrupt-controller; msi-controller; marvell,odmi-frames = <4>; reg = <0x300000 0x4000>,
arch/arm64/boot/dts/marvell/armada-cp11x.dtsi +5 -5
@@ -511,14 +511,14 @@ CP11X_LABEL(sdhci0): mmc@780000 { CP11X_LABEL(crypto): crypto@800000 { compatible = "inside-secure,safexcel-eip197b"; reg = <0x800000 0x200000>; - interrupts = <87 IRQ_TYPE_LEVEL_HIGH>, - <88 IRQ_TYPE_LEVEL_HIGH>, + interrupts = <88 IRQ_TYPE_LEVEL_HIGH>, <89 IRQ_TYPE_LEVEL_HIGH>, <90 IRQ_TYPE_LEVEL_HIGH>, <91 IRQ_TYPE_LEVEL_HIGH>, - <92 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "mem", "ring0", "ring1", - "ring2", "ring3", "eip"; + <92 IRQ_TYPE_LEVEL_HIGH>, + <87 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ring0", "ring1", "ring2", "ring3", + "eip", "mem"; clock-names = "core", "reg"; clocks = <&CP11X_LABEL(clk) 1 26>, <&CP11X_LABEL(clk) 1 17>;
arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts +1 -0
@@ -75,6 +75,7 @@ led-1 { memory@40000000 { reg = <0 0x40000000 0 0x40000000>; + device_type = "memory"; }; reg_1p8v: regulator-1p8v {
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts +1 -0
@@ -57,6 +57,7 @@ key-wps { memory@40000000 { reg = <0 0x40000000 0 0x20000000>; + device_type = "memory"; }; reg_1p8v: regulator-1p8v {
arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts +1 -1
@@ -43,7 +43,7 @@ fan: pwm-fan { #cooling-cells = <2>; /* cooling level (0, 1, 2) - pwm inverted */ cooling-levels = <255 96 0>; - pwms = <&pwm 0 10000 0>; + pwms = <&pwm 0 10000>; status = "okay"; };
arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts +4 -3
@@ -237,12 +237,13 @@ &spi0 { pinctrl-0 = <&spi_flash_pins>; cs-gpios = <0>, <0>; status = "okay"; - spi_nand: spi_nand@0 { + + spi_nand: flash@0 { compatible = "spi-nand"; reg = <0>; spi-max-frequency = <10000000>; - spi-tx-buswidth = <4>; - spi-rx-buswidth = <4>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; }; };
arch/arm64/boot/dts/mediatek/mt7986a.dtsi +1 -2
@@ -153,6 +153,7 @@ infracfg: infracfg@10001000 { compatible = "mediatek,mt7986-infracfg", "syscon"; reg = <0 0x10001000 0 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; }; wed_pcie: wed-pcie@10003000 {
@@ -234,7 +235,6 @@ crypto: crypto@10320000 { <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ring0", "ring1", "ring2", "ring3"; clocks = <&infracfg CLK_INFRA_EIP97_CK>; - clock-names = "infra_eip97_ck"; assigned-clocks = <&topckgen CLK_TOP_EIP_B_SEL>; assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>; status = "disabled";
@@ -243,7 +243,6 @@ crypto: crypto@10320000 { pwm: pwm@10048000 { compatible = "mediatek,mt7986-pwm"; reg = <0 0x10048000 0 0x1000>; - #clock-cells = <1>; #pwm-cells = <2>; interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; clocks = <&topckgen CLK_TOP_PWM_SEL>,
arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts +4 -3
@@ -152,12 +152,13 @@ &spi0 { pinctrl-0 = <&spi_flash_pins>; cs-gpios = <0>, <0>; status = "okay"; - spi_nand: spi_nand@0 { + + spi_nand: flash@0 { compatible = "spi-nand"; reg = <0>; spi-max-frequency = <10000000>; - spi-tx-buswidth = <4>; - spi-rx-buswidth = <4>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; }; };
arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi +4 -0
@@ -373,6 +373,10 @@ pen_eject { }; &cros_ec { + cbas { + compatible = "google,cros-cbas"; + }; + keyboard-controller { compatible = "google,cros-ec-keyb-switches"; };
arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi +4 -0
@@ -340,6 +340,10 @@ touch_pin_reset: pin_reset { }; &cros_ec { + cbas { + compatible = "google,cros-cbas"; + }; + keyboard-controller { compatible = "google,cros-ec-keyb-switches"; };
arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi +4 -0
@@ -344,6 +344,10 @@ rst_pin { }; &cros_ec { + cbas { + compatible = "google,cros-cbas"; + }; + keyboard-controller { compatible = "google,cros-ec-keyb-switches"; };
arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi +0 -4
@@ -907,10 +907,6 @@ usbc_extcon: extcon0 { google,usb-port-id = <0>; }; - cbas { - compatible = "google,cros-cbas"; - }; - typec { compatible = "google,cros-ec-typec"; #address-cells = <1>;
arch/arm64/boot/dts/mediatek/mt8186.dtsi +13 -5
@@ -931,11 +931,17 @@ power-domain@MT8186_POWER_DOMAIN_CSIRX_TOP { power-domain@MT8186_POWER_DOMAIN_SSUSB { reg = <MT8186_POWER_DOMAIN_SSUSB>; + clocks = <&topckgen CLK_TOP_USB_TOP>, + <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_REF>; + clock-names = "sys_ck", "ref_ck"; #power-domain-cells = <0>; }; power-domain@MT8186_POWER_DOMAIN_SSUSB_P1 { reg = <MT8186_POWER_DOMAIN_SSUSB_P1>; + clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_SYS>, + <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_REF>; + clock-names = "sys_ck", "ref_ck"; #power-domain-cells = <0>; };
@@ -1061,7 +1067,7 @@ power-domain@MT8186_POWER_DOMAIN_VENC { reg = <MT8186_POWER_DOMAIN_VENC>; clocks = <&topckgen CLK_TOP_VENC>, <&vencsys CLK_VENC_CKE1_VENC>; - clock-names = "venc0", "larb"; + clock-names = "venc0", "subsys-larb"; mediatek,infracfg = <&infracfg_ao>; #power-domain-cells = <0>; };
@@ -1530,8 +1536,9 @@ ssusb0: usb@11201000 { clocks = <&topckgen CLK_TOP_USB_TOP>, <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_REF>, <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_HCLK>, - <&infracfg_ao CLK_INFRA_AO_ICUSB>; - clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck"; + <&infracfg_ao CLK_INFRA_AO_ICUSB>, + <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_XHCI>; + clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck"; interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH 0>; phys = <&u2port0 PHY_TYPE_USB2>; power-domains = <&spm MT8186_POWER_DOMAIN_SSUSB>;
@@ -1595,8 +1602,9 @@ ssusb1: usb@11281000 { clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_SYS>, <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_REF>, <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_HCLK>, - <&clk26m>; - clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck"; + <&clk26m>, + <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_XHCI>; + clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck"; interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH 0>; phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>; power-domains = <&spm MT8186_POWER_DOMAIN_SSUSB_P1>;
arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi +0 -4
@@ -1308,10 +1308,6 @@ cros_ec: ec@0 { #address-cells = <1>; #size-cells = <0>; - base_detection: cbas { - compatible = "google,cros-cbas"; - }; - cros_ec_pwm: pwm { compatible = "google,cros-ec-pwm"; #pwm-cells = <1>;
arch/arm64/boot/dts/mediatek/mt8192.dtsi +1 -1
@@ -1770,7 +1770,7 @@ vcodec_enc: vcodec@17020000 { mediatek,scp = <&scp>; power-domains = <&spm MT8192_POWER_DOMAIN_VENC>; clocks = <&vencsys CLK_VENC_SET1_VENC>; - clock-names = "venc-set1"; + clock-names = "venc_sel"; assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>; assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D4>; };
arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts +4 -0
@@ -23,3 +23,7 @@ &sound { &ts_10 { status = "okay"; }; + +&watchdog { + /delete-property/ mediatek,disable-extrst; +};
arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts +4 -0
@@ -43,3 +43,7 @@ &sound { &ts_10 { status = "okay"; }; + +&watchdog { + /delete-property/ mediatek,disable-extrst; +};
arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts +4 -0
@@ -44,3 +44,7 @@ &sound { &ts_10 { status = "okay"; }; + +&watchdog { + /delete-property/ mediatek,disable-extrst; +};
arch/arm64/boot/dts/mediatek/mt8195-demo.dts +1 -0
@@ -128,6 +128,7 @@ mt6360: pmic@34 { compatible = "mediatek,mt6360"; reg = <0x34>; interrupt-controller; + #interrupt-cells = <1>; interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>; interrupt-names = "IRQB";
arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts +1 -1
@@ -174,7 +174,7 @@ ethernet@6800000 { status = "okay"; phy-handle = <&mgbe0_phy>; - phy-mode = "usxgmii"; + phy-mode = "10gbase-r"; mdio { #address-cells = <1>;
arch/arm64/boot/dts/qcom/ipq6018.dtsi +4 -4
@@ -767,10 +767,10 @@ pcie0: pci@20000000 { #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + interrupt-map = <0 0 0 1 &intc 0 0 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>, <&gcc GCC_PCIE0_AXI_M_CLK>,
arch/arm64/boot/dts/qcom/ipq8074.dtsi +8 -8
@@ -817,13 +817,13 @@ pcie1: pci@10000000 { interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 142 + interrupt-map = <0 0 0 1 &intc 0 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 143 + <0 0 0 2 &intc 0 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 144 + <0 0 0 3 &intc 0 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 145 + <0 0 0 4 &intc 0 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>,
@@ -879,13 +879,13 @@ pcie0: pci@20000000 { interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 75 + interrupt-map = <0 0 0 1 &intc 0 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 78 + <0 0 0 2 &intc 0 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 79 + <0 0 0 3 &intc 0 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 83 + <0 0 0 4 &intc 0 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
arch/arm64/boot/dts/qcom/qcm2290.dtsi +7 -0
@@ -418,6 +418,11 @@ tcsr_mutex: hwlock@340000 { #hwlock-cells = <1>; }; + tcsr_regs: syscon@3c0000 { + compatible = "qcom,qcm2290-tcsr", "syscon"; + reg = <0x0 0x003c0000 0x0 0x40000>; + }; + tlmm: pinctrl@500000 { compatible = "qcom,qcm2290-tlmm"; reg = <0x0 0x00500000 0x0 0x300000>;
@@ -665,6 +670,8 @@ usb_qmpphy: phy@1615000 { #phy-cells = <0>; + qcom,tcsr-reg = <&tcsr_regs 0xb244>; + status = "disabled"; };
arch/arm64/boot/dts/qcom/sa8540p.dtsi +3 -0
@@ -168,6 +168,9 @@ opp-2592000000 { }; &gpucc { + /* SA8295P and SA8540P doesn't provide gfx.lvl */ + /delete-property/ power-domains; + status = "disabled"; };
arch/arm64/boot/dts/qcom/sc8180x.dtsi +17 -9
@@ -289,7 +289,7 @@ LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { BIG_CPU_SLEEP_0: cpu-sleep-1-0 { compatible = "arm,idle-state"; arm,psci-suspend-param = <0x40000004>; - entry-latency-us = <241>; + entry-latency-us = <2411>; exit-latency-us = <1461>; min-residency-us = <4488>; local-timer-stop;
@@ -297,7 +297,15 @@ BIG_CPU_SLEEP_0: cpu-sleep-1-0 { }; domain-idle-states { - CLUSTER_SLEEP_0: cluster-sleep-0 { + CLUSTER_SLEEP_APSS_OFF: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <3300>; + exit-latency-us = <3300>; + min-residency-us = <6000>; + }; + + CLUSTER_SLEEP_AOSS_SLEEP: cluster-sleep-1 { compatible = "domain-idle-state"; arm,psci-suspend-param = <0x4100a344>; entry-latency-us = <3263>;
@@ -581,7 +589,7 @@ CPU_PD7: power-domain-cpu7 { CLUSTER_PD: power-domain-cpu-cluster0 { #power-domain-cells = <0>; - domain-idle-states = <&CLUSTER_SLEEP_0>; + domain-idle-states = <&CLUSTER_SLEEP_APSS_OFF &CLUSTER_SLEEP_AOSS_SLEEP>; }; };
@@ -781,6 +789,7 @@ gcc: clock-controller@100000 { clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; + power-domains = <&rpmhpd SC8180X_CX>; }; qupv3_id_0: geniqup@8c0000 {
@@ -2722,10 +2731,8 @@ mdss_mdp: mdp@ae01000 { "core", "vsync"; - assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, - <&dispcc DISP_CC_MDSS_VSYNC_CLK>; - assigned-clock-rates = <460000000>, - <19200000>; + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; operating-points-v2 = <&mdp_opp_table>; power-domains = <&rpmhpd SC8180X_MMCX>;
@@ -3185,7 +3192,7 @@ edp_phy: phy@aec2a00 { <&dispcc DISP_CC_MDSS_AHB_CLK>; clock-names = "aux", "cfg_ahb"; - power-domains = <&dispcc MDSS_GDSC>; + power-domains = <&rpmhpd SC8180X_MX>; #clock-cells = <1>; #phy-cells = <0>;
@@ -3211,6 +3218,7 @@ dispcc: clock-controller@af00000 { "edp_phy_pll_link_clk", "edp_phy_pll_vco_div_clk"; power-domains = <&rpmhpd SC8180X_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>;
@@ -3249,7 +3257,7 @@ tsens1: thermal-sensor@c265000 { aoss_qmp: power-controller@c300000 { compatible = "qcom,sc8180x-aoss-qmp", "qcom,aoss-qmp"; - reg = <0x0 0x0c300000 0x0 0x100000>; + reg = <0x0 0x0c300000 0x0 0x400>; interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; mboxes = <&apss_shared 0>;
arch/arm64/boot/dts/qcom/sdm845-db845c.dts +1 -1
@@ -580,7 +580,7 @@ &mss_pil { &pcie0 { status = "okay"; perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; - enable-gpio = <&tlmm 134 GPIO_ACTIVE_HIGH>; + wake-gpios = <&tlmm 134 GPIO_ACTIVE_HIGH>; vddpe-3v3-supply = <&pcie0_3p3v_dual>;
arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +4 -4
@@ -485,13 +485,13 @@ &pmi8998_charger { }; &q6afedai { - qi2s@22 { - reg = <22>; + dai@22 { + reg = <QUATERNARY_MI2S_RX>; qcom,sd-lines = <1>; }; - qi2s@23 { - reg = <23>; + dai@23 { + reg = <QUATERNARY_MI2S_TX>; qcom,sd-lines = <0>; }; };
arch/arm64/boot/dts/qcom/sdm845.dtsi +2 -2
@@ -3363,8 +3363,8 @@ slpi_pas: remoteproc@5c00000 { qcom,qmp = <&aoss_qmp>; - power-domains = <&rpmhpd SDM845_CX>, - <&rpmhpd SDM845_MX>; + power-domains = <&rpmhpd SDM845_LCX>, + <&rpmhpd SDM845_LMX>; power-domain-names = "lcx", "lmx"; memory-region = <&slpi_mem>;
arch/arm64/boot/dts/qcom/sm6115.dtsi +7 -0
@@ -591,6 +591,11 @@ tcsr_mutex: hwlock@340000 { #hwlock-cells = <1>; }; + tcsr_regs: syscon@3c0000 { + compatible = "qcom,sm6115-tcsr", "syscon"; + reg = <0x0 0x003c0000 0x0 0x40000>; + }; + tlmm: pinctrl@500000 { compatible = "qcom,sm6115-tlmm"; reg = <0x0 0x00500000 0x0 0x400000>,
@@ -856,6 +861,8 @@ usb_qmpphy: phy@1615000 { #phy-cells = <0>; + qcom,tcsr-reg = <&tcsr_regs 0xb244>; + status = "disabled"; };
arch/arm64/boot/dts/qcom/sm8150.dtsi +3 -3
@@ -1876,8 +1876,8 @@ pcie0: pci@1c00000 { phys = <&pcie0_lane>; phy-names = "pciephy"; - perst-gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>; - enable-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>; + wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pcie0_default_state>;
@@ -1978,7 +1978,7 @@ pcie1: pci@1c08000 { phys = <&pcie1_lane>; phy-names = "pciephy"; - perst-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>; enable-gpio = <&tlmm 104 GPIO_ACTIVE_HIGH>; pinctrl-names = "default";
arch/arm64/boot/dts/qcom/sm8450.dtsi +12 -0
@@ -1025,6 +1025,12 @@ uart20: serial@894000 { pinctrl-names = "default"; pinctrl-0 = <&qup_uart20_default>; interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; status = "disabled"; };
@@ -1417,6 +1423,12 @@ uart7: serial@99c000 { pinctrl-names = "default"; pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>; interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; status = "disabled"; }; };
arch/arm64/boot/dts/qcom/sm8550.dtsi +1 -1
@@ -3017,7 +3017,7 @@ sram@c3f0000 { spmi_bus: spmi@c400000 { compatible = "qcom,spmi-pmic-arb"; reg = <0 0x0c400000 0 0x3000>, - <0 0x0c500000 0 0x4000000>, + <0 0x0c500000 0 0x400000>, <0 0x0c440000 0 0x80000>, <0 0x0c4c0000 0 0x20000>, <0 0x0c42d000 0 0x4000>;
arch/arm64/boot/dts/renesas/r8a779a0.dtsi +2 -2
@@ -658,7 +658,7 @@ channel7 { avb0: ethernet@e6800000 { compatible = "renesas,etheravb-r8a779a0", "renesas,etheravb-rcar-gen4"; - reg = <0 0xe6800000 0 0x800>; + reg = <0 0xe6800000 0 0x1000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
@@ -706,7 +706,7 @@ avb0: ethernet@e6800000 { avb1: ethernet@e6810000 { compatible = "renesas,etheravb-r8a779a0", "renesas,etheravb-rcar-gen4"; - reg = <0 0xe6810000 0 0x800>; + reg = <0 0xe6810000 0 0x1000>; interrupts = <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
arch/arm64/boot/dts/renesas/r8a779g0.dtsi +47 -41
142 lines not on this page · raw message
arch/arm64/boot/dts/renesas/r9a07g043u.dtsi +10 -2
@@ -109,7 +109,13 @@ irqc: interrupt-controller@110a0000 { <SOC_PERIPHERAL_IRQ(473) IRQ_TYPE_LEVEL_HIGH>, <SOC_PERIPHERAL_IRQ(474) IRQ_TYPE_LEVEL_HIGH>, <SOC_PERIPHERAL_IRQ(475) IRQ_TYPE_LEVEL_HIGH>, - <SOC_PERIPHERAL_IRQ(25) IRQ_TYPE_EDGE_RISING>; + <SOC_PERIPHERAL_IRQ(25) IRQ_TYPE_EDGE_RISING>, + <SOC_PERIPHERAL_IRQ(34) IRQ_TYPE_EDGE_RISING>, + <SOC_PERIPHERAL_IRQ(35) IRQ_TYPE_EDGE_RISING>, + <SOC_PERIPHERAL_IRQ(36) IRQ_TYPE_EDGE_RISING>, + <SOC_PERIPHERAL_IRQ(37) IRQ_TYPE_EDGE_RISING>, + <SOC_PERIPHERAL_IRQ(38) IRQ_TYPE_EDGE_RISING>, + <SOC_PERIPHERAL_IRQ(39) IRQ_TYPE_EDGE_RISING>; interrupt-names = "nmi", "irq0", "irq1", "irq2", "irq3", "irq4", "irq5", "irq6", "irq7",
@@ -121,7 +127,9 @@ irqc: interrupt-controller@110a0000 { "tint20", "tint21", "tint22", "tint23", "tint24", "tint25", "tint26", "tint27", "tint28", "tint29", "tint30", "tint31", - "bus-err"; + "bus-err", "ec7tie1-0", "ec7tie2-0", + "ec7tiovf-0", "ec7tie1-1", "ec7tie2-1", + "ec7tiovf-1"; clocks = <&cpg CPG_MOD R9A07G043_IA55_CLK>, <&cpg CPG_MOD R9A07G043_IA55_PCLK>; clock-names = "clk", "pclk";
arch/arm64/boot/dts/renesas/r9a07g044.dtsi +21 -1
@@ -905,7 +905,27 @@ irqc: interrupt-controller@110a0000 { <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "nmi", "irq0", "irq1", "irq2", "irq3", + "irq4", "irq5", "irq6", "irq7", + "tint0", "tint1", "tint2", "tint3", + "tint4", "tint5", "tint6", "tint7", + "tint8", "tint9", "tint10", "tint11", + "tint12", "tint13", "tint14", "tint15", + "tint16", "tint17", "tint18", "tint19", + "tint20", "tint21", "tint22", "tint23", + "tint24", "tint25", "tint26", "tint27", + "tint28", "tint29", "tint30", "tint31", + "bus-err", "ec7tie1-0", "ec7tie2-0", + "ec7tiovf-0", "ec7tie1-1", "ec7tie2-1", + "ec7tiovf-1"; clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>, <&cpg CPG_MOD R9A07G044_IA55_PCLK>; clock-names = "clk", "pclk";
arch/arm64/boot/dts/renesas/r9a07g054.dtsi +21 -1
@@ -912,7 +912,27 @@ irqc: interrupt-controller@110a0000 { <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "nmi", "irq0", "irq1", "irq2", "irq3", + "irq4", "irq5", "irq6", "irq7", + "tint0", "tint1", "tint2", "tint3", + "tint4", "tint5", "tint6", "tint7", + "tint8", "tint9", "tint10", "tint11", + "tint12", "tint13", "tint14", "tint15", + "tint16", "tint17", "tint18", "tint19", + "tint20", "tint21", "tint22", "tint23", + "tint24", "tint25", "tint26", "tint27", + "tint28", "tint29", "tint30", "tint31", + "bus-err", "ec7tie1-0", "ec7tie2-0", + "ec7tiovf-0", "ec7tie1-1", "ec7tie2-1", + "ec7tiovf-1"; clocks = <&cpg CPG_MOD R9A07G054_IA55_CLK>, <&cpg CPG_MOD R9A07G054_IA55_PCLK>; clock-names = "clk", "pclk";
arch/arm64/boot/dts/renesas/ulcb-kf.dtsi +4 -0
@@ -234,6 +234,7 @@ gpio_exp_74: gpio@74 { gpio-controller; #gpio-cells = <2>; interrupt-controller; + #interrupt-cells = <2>; interrupt-parent = <&gpio6>; interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
@@ -294,6 +295,7 @@ gpio_exp_75: gpio@75 { gpio-controller; #gpio-cells = <2>; interrupt-controller; + #interrupt-cells = <2>; interrupt-parent = <&gpio6>; interrupts = <4 IRQ_TYPE_EDGE_FALLING>; };
@@ -314,6 +316,7 @@ gpio_exp_76: gpio@76 { gpio-controller; #gpio-cells = <2>; interrupt-controller; + #interrupt-cells = <2>; interrupt-parent = <&gpio7>; interrupts = <3 IRQ_TYPE_EDGE_FALLING>; };
@@ -324,6 +327,7 @@ gpio_exp_77: gpio@77 { gpio-controller; #gpio-cells = <2>; interrupt-controller; + #interrupt-cells = <2>; interrupt-parent = <&gpio5>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; };
arch/arm64/boot/dts/rockchip/rk356x.dtsi +2 -1
@@ -597,6 +597,7 @@ vpu: video-codec@fdea0400 { compatible = "rockchip,rk3568-vpu"; reg = <0x0 0xfdea0000 0x0 0x800>; interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "vdpu"; clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; clock-names = "aclk", "hclk"; iommus = <&vdpu_mmu>;
@@ -1116,7 +1117,7 @@ i2s2_2ch: i2s@fe420000 { dmas = <&dmac1 4>, <&dmac1 5>; dma-names = "tx", "rx"; resets = <&cru SRST_M_I2S2_2CH>; - reset-names = "m"; + reset-names = "tx-m"; rockchip,grf = <&grf>; pinctrl-names = "default"; pinctrl-0 = <&i2s2m0_sclktx
arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts +1 -0
@@ -215,6 +215,7 @@ pmic@0 { <&rk806_dvs2_null>, <&rk806_dvs3_null>; pinctrl-names = "default"; spi-max-frequency = <1000000>; + system-power-controller; vcc1-supply = <&vcc5v0_sys>; vcc2-supply = <&vcc5v0_sys>;
arch/arm64/boot/dts/rockchip/rk3588s.dtsi +0 -2
@@ -1542,7 +1542,6 @@ i2s2_2ch: i2s@fe490000 { dmas = <&dmac1 0>, <&dmac1 1>; dma-names = "tx", "rx"; power-domains = <&power RK3588_PD_AUDIO>; - rockchip,trcm-sync-tx-only; pinctrl-names = "default"; pinctrl-0 = <&i2s2m1_lrck &i2s2m1_sclk
@@ -1563,7 +1562,6 @@ i2s3_2ch: i2s@fe4a0000 { dmas = <&dmac1 2>, <&dmac1 3>; dma-names = "tx", "rx"; power-domains = <&power RK3588_PD_AUDIO>; - rockchip,trcm-sync-tx-only; pinctrl-names = "default"; pinctrl-0 = <&i2s3_lrck &i2s3_sclk
arch/arm64/boot/dts/ti/k3-am62-main.dtsi +7 -2
@@ -613,6 +613,8 @@ usb0: usb@31000000 { interrupt-names = "host", "peripheral"; maximum-speed = "high-speed"; dr_mode = "otg"; + snps,usb2-gadget-lpm-disable; + snps,usb2-lpm-disable; }; };
@@ -636,6 +638,8 @@ usb1: usb@31100000 { interrupt-names = "host", "peripheral"; maximum-speed = "high-speed"; dr_mode = "otg"; + snps,usb2-gadget-lpm-disable; + snps,usb2-lpm-disable; }; };
@@ -743,9 +747,10 @@ dss: dss@30200000 { <0x00 0x30207000 0x00 0x1000>, /* ovr1 */ <0x00 0x30208000 0x00 0x1000>, /* ovr2 */ <0x00 0x3020a000 0x00 0x1000>, /* vp1: Used for OLDI */ - <0x00 0x3020b000 0x00 0x1000>; /* vp2: Used as DPI Out */ + <0x00 0x3020b000 0x00 0x1000>, /* vp2: Used as DPI Out */ + <0x00 0x30201000 0x00 0x1000>; /* common1 */ reg-names = "common", "vidl1", "vid", - "ovr1", "ovr2", "vp1", "vp2"; + "ovr1", "ovr2", "vp1", "vp2", "common1"; power-domains = <&k3_pds 186 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 186 6>, <&dss_vp1_clk>,
arch/arm64/boot/dts/ti/k3-am62p.dtsi +1 -1
@@ -71,7 +71,7 @@ cbass_main: bus@f0000 { <0x00 0x43600000 0x00 0x43600000 0x00 0x00010000>, /* SA3 sproxy data */ <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */ <0x00 0x44860000 0x00 0x44860000 0x00 0x00040000>, /* SA3 sproxy config */ - <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>, /* DMSS */ + <0x00 0x48000000 0x00 0x48000000 0x00 0x06408000>, /* DMSS */ <0x00 0x60000000 0x00 0x60000000 0x00 0x08000000>, /* FSS0 DAT1 */ <0x00 0x70000000 0x00 0x70000000 0x00 0x00010000>, /* OCSRAM */ <0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */
arch/arm64/boot/dts/ti/k3-am64-main.dtsi +10 -1
@@ -612,6 +612,10 @@ sdhci0: mmc@fa10000 { ti,otap-del-sel-mmc-hs = <0x0>; ti,otap-del-sel-ddr52 = <0x6>; ti,otap-del-sel-hs200 = <0x7>; + ti,itap-del-sel-legacy = <0x10>; + ti,itap-del-sel-mmc-hs = <0xa>; + ti,itap-del-sel-ddr52 = <0x3>; + status = "disabled"; }; sdhci1: mmc@fa00000 {
@@ -623,13 +627,18 @@ sdhci1: mmc@fa00000 { clock-names = "clk_ahb", "clk_xin"; ti,trm-icp = <0x2>; ti,otap-del-sel-legacy = <0x0>; - ti,otap-del-sel-sd-hs = <0xf>; + ti,otap-del-sel-sd-hs = <0x0>; ti,otap-del-sel-sdr12 = <0xf>; ti,otap-del-sel-sdr25 = <0xf>; ti,otap-del-sel-sdr50 = <0xc>; ti,otap-del-sel-sdr104 = <0x6>; ti,otap-del-sel-ddr50 = <0x9>; + ti,itap-del-sel-legacy = <0x0>; + ti,itap-del-sel-sd-hs = <0x0>; + ti,itap-del-sel-sdr12 = <0x0>; + ti,itap-del-sel-sdr25 = <0x0>; ti,clkbuf-sel = <0x7>; + status = "disabled"; }; cpsw3g: ethernet@8000000 {
arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi +1 -0
@@ -200,6 +200,7 @@ flash@0 { }; &sdhci0 { + status = "okay"; bus-width = <8>; non-removable; ti,driver-strength-ohm = <50>;
arch/arm64/boot/dts/ti/k3-am642-evm.dts +32 -2
@@ -35,6 +35,7 @@ aliases { }; memory@80000000 { + bootph-all; device_type = "memory"; /* 2G RAM */ reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
@@ -108,6 +109,7 @@ rtos_ipc_memory_region: ipc-memories@a5000000 { evm_12v0: regulator-0 { /* main DC jack */ + bootph-all; compatible = "regulator-fixed"; regulator-name = "evm_12v0"; regulator-min-microvolt = <12000000>;
@@ -129,6 +131,7 @@ vsys_5v0: regulator-1 { vsys_3v3: regulator-2 { /* output of LM5140 */ + bootph-all; compatible = "regulator-fixed"; regulator-name = "vsys_3v3"; regulator-min-microvolt = <3300000>;
@@ -140,6 +143,7 @@ vsys_3v3: regulator-2 { vdd_mmc1: regulator-3 { /* TPS2051BD */ + bootph-all; compatible = "regulator-fixed"; regulator-name = "vdd_mmc1"; regulator-min-microvolt = <3300000>;
@@ -161,6 +165,7 @@ vddb: regulator-4 { }; vtt_supply: regulator-5 { + bootph-all; compatible = "regulator-fixed"; regulator-name = "vtt"; pinctrl-names = "default";
@@ -251,6 +256,7 @@ AM64X_IOPAD(0x0244, PIN_OUTPUT, 0) /* (E14) UART1_TXD */ }; main_uart0_pins_default: main-uart0-default-pins { + bootph-all; pinctrl-single,pins = < AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */ AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */
@@ -269,6 +275,7 @@ AM64X_IOPAD(0x0218, PIN_INPUT, 0) /* (A14) SPI0_D1 */ }; main_i2c0_pins_default: main-i2c0-default-pins { + bootph-all; pinctrl-single,pins = < AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */ AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */
@@ -276,6 +283,7 @@ AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */ }; main_i2c1_pins_default: main-i2c1-default-pins { + bootph-all; pinctrl-single,pins = < AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */ AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */
@@ -283,6 +291,7 @@ AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */ }; mdio1_pins_default: mdio1-default-pins { + bootph-all; pinctrl-single,pins = < AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */ AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */
@@ -290,6 +299,7 @@ AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */ }; rgmii1_pins_default: rgmii1-default-pins { + bootph-all; pinctrl-single,pins = < AM64X_IOPAD(0x01cc, PIN_INPUT, 4) /* (W5) PRG0_PRU1_GPO7.RGMII1_RD0 */ AM64X_IOPAD(0x01d4, PIN_INPUT, 4) /* (Y5) PRG0_PRU1_GPO9.RGMII1_RD1 */
@@ -307,6 +317,7 @@ AM64X_IOPAD(0x00dc, PIN_OUTPUT, 4) /* (U15) PRG1_PRU0_GPO9.RGMII1_TX_CTL */ }; rgmii2_pins_default: rgmii2-default-pins { + bootph-all; pinctrl-single,pins = < AM64X_IOPAD(0x0108, PIN_INPUT, 4) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */ AM64X_IOPAD(0x010c, PIN_INPUT, 4) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */
@@ -324,6 +335,7 @@ AM64X_IOPAD(0x0144, PIN_OUTPUT, 4) /* (Y11) PRG1_PRU1_GPO15.RGMII2_TX_CTL */ }; main_usb0_pins_default: main-usb0-default-pins { + bootph-all; pinctrl-single,pins = < AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */ >;
@@ -366,6 +378,7 @@ AM64X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (C17) MCAN1_TX */ }; ddr_vtt_pins_default: ddr-vtt-default-pins { + bootph-all; pinctrl-single,pins = < AM64X_IOPAD(0x0030, PIN_OUTPUT_PULLUP, 7) /* (L18) OSPI0_CSN1.GPIO0_12 */ >;
@@ -373,6 +386,7 @@ AM64X_IOPAD(0x0030, PIN_OUTPUT_PULLUP, 7) /* (L18) OSPI0_CSN1.GPIO0_12 */ }; &main_uart0 { + bootph-all; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_uart0_pins_default>;
@@ -387,6 +401,7 @@ &main_uart1 { }; &main_i2c0 { + bootph-all; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_i2c0_pins_default>;
@@ -400,12 +415,14 @@ eeprom@50 { }; &main_i2c1 { + bootph-all; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_i2c1_pins_default>; clock-frequency = <400000>; exp1: gpio@22 { + bootph-all; compatible = "ti,tca6424"; reg = <0x22>; gpio-controller;
@@ -438,6 +455,10 @@ display@3c { }; }; +&main_gpio0 { + bootph-all; +}; + /* mcu_gpio0 is reserved for mcu firmware usage */ &mcu_gpio0 { status = "reserved";
@@ -457,16 +478,19 @@ eeprom@0 { }; }; +/* eMMC */ &sdhci0 { - /* emmc */ + status = "okay"; bus-width = <8>; non-removable; ti,driver-strength-ohm = <50>; disable-wp; }; +/* SD/MMC */ &sdhci1 { - /* SD/MMC */ + bootph-all; + status = "okay"; vmmc-supply = <&vdd_mmc1>; pinctrl-names = "default"; bus-width = <4>;
@@ -476,11 +500,13 @@ &sdhci1 { }; &usbss0 { + bootph-all; ti,vbus-divider; ti,usb2-only; }; &usb0 { + bootph-all; dr_mode = "otg"; maximum-speed = "high-speed"; pinctrl-names = "default";
@@ -488,11 +514,13 @@ &usb0 { }; &cpsw3g { + bootph-all; pinctrl-names = "default"; pinctrl-0 = <&rgmii1_pins_default>, <&rgmii2_pins_default>; }; &cpsw_port1 { + bootph-all; phy-mode = "rgmii-rxid"; phy-handle = <&cpsw3g_phy0>; };
@@ -503,11 +531,13 @@ &cpsw_port2 { }; &cpsw3g_mdio { + bootph-all; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mdio1_pins_default>; cpsw3g_phy0: ethernet-phy@0 { + bootph-all; reg = <0>; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts +1 -0
@@ -264,6 +264,7 @@ &main_uart1 { }; &sdhci1 { + status = "okay"; vmmc-supply = <&vcc_3v3_mmc>; pinctrl-names = "default"; pinctrl-0 = <&main_mmc1_pins_default>;
arch/arm64/boot/dts/ti/k3-am642-sk.dts +32 -1
@@ -34,6 +34,7 @@ aliases { }; memory@80000000 { + bootph-pre-ram; device_type = "memory"; /* 2G RAM */ reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
@@ -107,6 +108,7 @@ rtos_ipc_memory_region: ipc-memories@a5000000 { vusb_main: regulator-0 { /* USB MAIN INPUT 5V DC */ + bootph-all; compatible = "regulator-fixed"; regulator-name = "vusb_main5v0"; regulator-min-microvolt = <5000000>;
@@ -117,6 +119,7 @@ vusb_main: regulator-0 { vcc_3v3_sys: regulator-1 { /* output of LP8733xx */ + bootph-all; compatible = "regulator-fixed"; regulator-name = "vcc_3v3_sys"; regulator-min-microvolt = <3300000>;
@@ -128,6 +131,7 @@ vcc_3v3_sys: regulator-1 { vdd_mmc1: regulator-2 { /* TPS2051BD */ + bootph-all; compatible = "regulator-fixed"; regulator-name = "vdd_mmc1"; regulator-min-microvolt = <3300000>;
@@ -234,6 +238,7 @@ led-7 { &main_pmx0 { main_mmc1_pins_default: main-mmc1-default-pins { + bootph-all; pinctrl-single,pins = < AM64X_IOPAD(0x029c, PIN_INPUT_PULLUP, 0) /* (C20) MMC1_SDWP */ AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0) /* (D19) MMC1_SDCD */
@@ -248,6 +253,7 @@ AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0) /* (K18) MMC1_DAT3 */ }; main_uart0_pins_default: main-uart0-default-pins { + bootph-all; pinctrl-single,pins = < AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */ AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */
@@ -257,6 +263,7 @@ AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */ }; main_uart1_pins_default: main-uart1-default-pins { + bootph-pre-ram; pinctrl-single,pins = < AM64X_IOPAD(0x0248, PIN_INPUT, 0) /* (D16) UART1_CTSn */ AM64X_IOPAD(0x024c, PIN_OUTPUT, 0) /* (E16) UART1_RTSn */
@@ -266,12 +273,14 @@ AM64X_IOPAD(0x0244, PIN_OUTPUT, 0) /* (E14) UART1_TXD */ }; main_usb0_pins_default: main-usb0-default-pins { + bootph-all; pinctrl-single,pins = < AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */ >; }; main_i2c0_pins_default: main-i2c0-default-pins { + bootph-all; pinctrl-single,pins = < AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */ AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */
@@ -279,6 +288,7 @@ AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */ }; main_i2c1_pins_default: main-i2c1-default-pins { + bootph-all; pinctrl-single,pins = < AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */ AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */
@@ -367,6 +377,7 @@ AM64X_IOPAD(0x00bc, PIN_INPUT, 7) /* (U8) GPIO0_46 */ }; &main_uart0 { + bootph-all; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_uart0_pins_default>;
@@ -375,12 +386,14 @@ &main_uart0 { &main_uart1 { /* main_uart1 is reserved for firmware usage */ + bootph-pre-ram; status = "reserved"; pinctrl-names = "default"; pinctrl-0 = <&main_uart1_pins_default>; }; &main_i2c0 { + bootph-all; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_i2c0_pins_default>;
@@ -393,12 +406,14 @@ eeprom@51 { }; &main_i2c1 { + bootph-all; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_i2c1_pins_default>; clock-frequency = <400000>; exp1: gpio@70 { + bootph-all; compatible = "nxp,pca9538"; reg = <0x70>; gpio-controller;
@@ -424,6 +439,7 @@ &mcu_gpio0 { }; &sdhci0 { + status = "okay"; vmmc-supply = <&wlan_en>; bus-width = <4>; non-removable;
@@ -443,8 +459,10 @@ wlcore: wlcore@2 { }; }; +/* SD/MMC */ &sdhci1 { - /* SD/MMC */ + bootph-all; + status = "okay"; vmmc-supply = <&vdd_mmc1>; pinctrl-names = "default"; bus-width = <4>;
@@ -454,11 +472,22 @@ &sdhci1 { }; &serdes_ln_ctrl { + bootph-all; idle-states = <AM64_SERDES0_LANE0_USB>; }; +&serdes_refclk { + bootph-all; +}; + +&serdes_wiz0 { + bootph-all; +}; + &serdes0 { + bootph-all; serdes0_usb_link: phy@0 { + bootph-all; reg = <0>; cdns,num-lanes = <1>; #phy-cells = <0>;
@@ -468,10 +497,12 @@ serdes0_usb_link: phy@0 { }; &usbss0 { + bootph-all; ti,vbus-divider; }; &usb0 { + bootph-all; dr_mode = "host"; maximum-speed = "super-speed"; pinctrl-names = "default";
arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts +0 -1
@@ -420,7 +420,6 @@ &sdhci1 { ti,driver-strength-ohm = <50>; ti,fails-without-test-cd; /* Enabled by overlay */ - status = "disabled"; }; &tscadc0 {
arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi +1 -0
@@ -207,6 +207,7 @@ partitions { }; &sdhci0 { + status = "okay"; non-removable; disable-wp; no-sdio;
arch/arm64/boot/dts/ti/k3-am65-main.dtsi +3 -2
@@ -1013,9 +1013,10 @@ dss: dss@4a00000 { <0x0 0x04a07000 0x0 0x1000>, /* ovr1 */ <0x0 0x04a08000 0x0 0x1000>, /* ovr2 */ <0x0 0x04a0a000 0x0 0x1000>, /* vp1 */ - <0x0 0x04a0b000 0x0 0x1000>; /* vp2 */ + <0x0 0x04a0b000 0x0 0x1000>, /* vp2 */ + <0x0 0x04a01000 0x0 0x1000>; /* common1 */ reg-names = "common", "vidl1", "vid", - "ovr1", "ovr2", "vp1", "vp2"; + "ovr1", "ovr2", "vp1", "vp2", "common1"; ti,am65x-oldi-io-ctrl = <&dss_oldi_io_ctrl>;
arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts +9 -9
@@ -91,24 +91,25 @@ vdd_sd_dv: gpio-regulator-TLV71033 { }; &wkup_pmx0 { +}; + +&wkup_pmx2 { mcu_uart0_pins_default: mcu-uart0-default-pins { pinctrl-single,pins = < - J721E_WKUP_IOPAD(0xf4, PIN_INPUT, 0) /* (D20) MCU_UART0_RXD */ - J721E_WKUP_IOPAD(0xf0, PIN_OUTPUT, 0) /* (D19) MCU_UART0_TXD */ - J721E_WKUP_IOPAD(0xf8, PIN_INPUT, 0) /* (E20) MCU_UART0_CTSn */ - J721E_WKUP_IOPAD(0xfc, PIN_OUTPUT, 0) /* (E21) MCU_UART0_RTSn */ + J721E_WKUP_IOPAD(0x90, PIN_INPUT, 0) /* (E20) MCU_UART0_CTSn */ + J721E_WKUP_IOPAD(0x94, PIN_OUTPUT, 0) /* (E21) MCU_UART0_RTSn */ + J721E_WKUP_IOPAD(0x8c, PIN_INPUT, 0) /* (D20) MCU_UART0_RXD */ + J721E_WKUP_IOPAD(0x88, PIN_OUTPUT, 0) /* (D19) MCU_UART0_TXD */ >; }; wkup_uart0_pins_default: wkup-uart0-default-pins { pinctrl-single,pins = < - J721E_WKUP_IOPAD(0xb0, PIN_INPUT, 0) /* (B14) WKUP_UART0_RXD */ - J721E_WKUP_IOPAD(0xb4, PIN_OUTPUT, 0) /* (A14) WKUP_UART0_TXD */ + J721E_WKUP_IOPAD(0x48, PIN_INPUT, 0) /* (B14) WKUP_UART0_RXD */ + J721E_WKUP_IOPAD(0x4c, PIN_OUTPUT, 0) /* (A14) WKUP_UART0_TXD */ >; }; -}; -&wkup_pmx2 { mcu_cpsw_pins_default: mcu-cpsw-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */
@@ -210,7 +211,6 @@ &mcu_uart0 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mcu_uart0_pins_default>; - clock-frequency = <96000000>; }; &main_uart0 {
arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts +0 -2
@@ -190,8 +190,6 @@ J721S2_IOPAD(0x038, PIN_OUTPUT, 0) /* (AB28) MCASP0_ACLKX.MCAN5_TX */ &wkup_pmx2 { wkup_uart0_pins_default: wkup-uart0-default-pins { pinctrl-single,pins = < - J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (E25) WKUP_GPIO0_6.WKUP_UART0_CTSn */ - J721S2_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (F28) WKUP_GPIO0_7.WKUP_UART0_RTSn */ J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (D28) WKUP_UART0_RXD */ J721S2_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (D27) WKUP_UART0_TXD */ >;
arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi +1 -1
@@ -652,7 +652,7 @@ wkup_vtm0: temperature-sensor@42040000 { compatible = "ti,j7200-vtm"; reg = <0x00 0x42040000 0x0 0x350>, <0x00 0x42050000 0x0 0x350>; - power-domains = <&k3_pds 154 TI_SCI_PD_SHARED>; + power-domains = <&k3_pds 180 TI_SCI_PD_SHARED>; #thermal-sensor-cells = <1>; }; };
arch/arm64/boot/dts/ti/k3-j784s4-evm.dts +0 -2
@@ -296,8 +296,6 @@ &wkup_pmx2 { wkup_uart0_pins_default: wkup-uart0-default-pins { bootph-all; pinctrl-single,pins = < - J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (L37) WKUP_GPIO0_6.WKUP_UART0_CTSn */ - J721S2_WKUP_IOPAD(0x074, PIN_INPUT, 0) /* (L36) WKUP_GPIO0_7.WKUP_UART0_RTSn */ J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */ J721S2_WKUP_IOPAD(0x04c, PIN_INPUT, 0) /* (K34) WKUP_UART0_TXD */ >;
arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi +1 -1
@@ -616,7 +616,7 @@ wkup_vtm0: temperature-sensor@42040000 { compatible = "ti,j7200-vtm"; reg = <0x00 0x42040000 0x00 0x350>, <0x00 0x42050000 0x00 0x350>; - power-domains = <&k3_pds 154 TI_SCI_PD_SHARED>; + power-domains = <&k3_pds 243 TI_SCI_PD_SHARED>; #thermal-sensor-cells = <1>; };
arch/arm64/include/asm/fpsimd.h +6 -6
@@ -36,13 +36,13 @@* When we defined the maximum SVE vector length we defined the ABI so * that the maximum vector length included all the reserved for future * expansion bits in ZCR rather than those just currently defined by -* the architecture. While SME follows a similar pattern the fact that -* it includes a square matrix means that any allocations that attempt -* to cover the maximum potential vector length (such as happen with -* the regset used for ptrace) end up being extremely large. Define -* the much lower actual limit for use in such situations. +* the architecture. Using this length to allocate worst size buffers +* results in excessively large allocations, and this effect is even +* more pronounced for SME due to ZA. Define more suitable VLs for +* these situations. */ -#define SME_VQ_MAX 16 +#define ARCH_SVE_VQ_MAX ((ZCR_ELx_LEN_MASK >> ZCR_ELx_LEN_SHIFT) + 1) +#define SME_VQ_MAX ((SMCR_ELx_LEN_MASK >> SMCR_ELx_LEN_SHIFT) + 1)struct task_struct ;
arch/arm64/kernel/ptrace.c +2 -1
@@ -1499,7 +1499,8 @@ static const struct user_regset aarch64_regsets[] = { #ifdef CONFIG_ARM64_SVE [REGSET_SVE ] = {/* Scalable Vector Extension */ .core_note_type =NT_ARM_SVE , - .n =DIV_ROUND_UP (SVE_PT_SIZE (SVE_VQ_MAX ,SVE_PT_REGS_SVE ), + .n =DIV_ROUND_UP (SVE_PT_SIZE (ARCH_SVE_VQ_MAX , +SVE_PT_REGS_SVE ),SVE_VQ_BYTES ), .size =SVE_VQ_BYTES , .align = SVE_VQ_BYTES,
arch/mips/include/asm/ptrace.h +1 -0
@@ -60,6 +60,7 @@ static inline void instruction_pointer_set(struct pt_regs *regs, unsigned long val) { regs->cp0_epc = val; + regs->cp0_cause &= ~CAUSEF_BD ; }/* Query offset/name of register from its name/offset */
arch/parisc/kernel/ftrace.c +1 -1
@@ -78,7 +78,7 @@ asmlinkage void notrace __hot ftrace_function_trampoline(unsigned long parent,#endif } -#ifdef CONFIG_FUNCTION_GRAPH_TRACER +#if defined(CONFIG_DYNAMIC_FTRACE ) && defined(CONFIG_FUNCTION_GRAPH_TRACER )int ftrace_enable_ftrace_graph_caller (void ) {static_key_enable (&ftrace_graph_enable.key);
arch/powerpc/include/asm/vmalloc.h +2 -2
@@ -7,14 +7,14 @@#ifdef CONFIG_HAVE_ARCH_HUGE_VMAP #define arch_vmap_pud_supported arch_vmap_pud_supported -static inline bool arch_vmap_pud_supported (pgprot_t prot) +static __always_inline bool arch_vmap_pud_supported(pgprot_t prot) {/* HPT does not cope with large pages in the vmalloc area */ return radix_enabled (); }#define arch_vmap_pmd_supported arch_vmap_pmd_supported -static inline bool arch_vmap_pmd_supported (pgprot_t prot) +static __always_inline bool arch_vmap_pmd_supported(pgprot_t prot) {return radix_enabled (); }
arch/powerpc/perf/hv-gpci.c +27 -2
@@ -695,6 +695,20 @@ static unsigned long single_gpci_request(u32 req, u32 starting_index, ret =plpar_hcall_norets (H_GET_PERF_COUNTER_INFO ,virt_to_phys (arg),HGPCI_REQ_BUFFER_SIZE ); + +/* +* ret value as 'H_PARAMETER' with detail_rc as 'GEN_BUF_TOO_SMALL', +* specifies that the current buffer size cannot accommodate +* all the information and a partial buffer returned. +* Since in this function we are only accessing data for a given starting index, +* we don't need to accommodate whole data and can get required count by +* accessing first entry data. +* Hence hcall fails only incase the ret value is other than H_SUCCESS or +* H_PARAMETER with detail_rc value as GEN_BUF_TOO_SMALL(0x1B). +*/ +if (ret ==H_PARAMETER &&be32_to_cpu (arg->params.detail_rc) ==0x1B ) + ret =0 ; +if (ret) {pr_devel ("hcall failed: 0x%lx\n" , ret); goto out;
@@ -759,6 +773,7 @@ static int h_gpci_event_init(struct perf_event *event) {u64 count;u8 length; +unsigned long ret;/* Not our event */ if (event->attr.type != event->pmu->type)
@@ -789,13 +804,23 @@ static int h_gpci_event_init(struct perf_event *event) }/* check if the request works... */ -if (single_gpci_request (event_get_request (event), + ret =single_gpci_request (event_get_request (event),event_get_starting_index (event),event_get_secondary_index (event),event_get_counter_info_version (event),event_get_offset (event), length, - &count)) { + &count); + +/* +* ret value as H_AUTHORITY implies that partition is not permitted to retrieve +* performance information, and required to set +* "Enable Performance Information Collection" option. +*/ +if (ret ==H_AUTHORITY ) +return -EPERM ; + +if (ret) {pr_devel ("gpci hcall failed\n" );return -EINVAL ; }
arch/powerpc/platforms/embedded6xx/linkstation.c +0 -3
@@ -99,9 +99,6 @@ static void __init linkstation_init_IRQ(void)mpic_init (mpic); } -extern void avr_uart_configure (void ); -extern void avr_uart_send (const char ); -static void __noreturn linkstation_restart (char *cmd) {local_irq_disable ();
arch/powerpc/platforms/embedded6xx/mpc10x.h +3 -0
@@ -156,4 +156,7 @@ int mpc10x_disable_store_gathering(struct pci_controller *hose);/* For MPC107 boards that use the built-in openpic */ void mpc10x_set_openpic (void ); +void avr_uart_configure (void ); +void avr_uart_send (const char c); +#endif /* __PPC_KERNEL_MPC10X_H */
arch/powerpc/platforms/ps3/Kconfig +1 -0
@@ -67,6 +67,7 @@ config PS3_VUART config PS3_PS3AV depends on PPC_PS3 tristate "PS3 AV settings driver" if PS3_ADVANCED + select VIDEO select PS3_VUART default y help
arch/powerpc/platforms/pseries/papr_platform_attributes.c +5 -3
@@ -101,10 +101,12 @@ static int papr_get_attr(u64 id, struct energy_scale_attribute *esi) esi_buf_size =ESI_HDR_SIZE + (CURR_MAX_ESI_ATTRS * max_esi_attrs); temp_buf =krealloc (buf, esi_buf_size,GFP_KERNEL ); -if (temp_buf) +if (temp_buf) { buf = temp_buf; -else -return -ENOMEM ; + }else { + ret = -ENOMEM ; + goto out_buf; + } goto retry; }
arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts +1 -0
@@ -123,6 +123,7 @@ pmic@58 { interrupt-parent = <&gpio>; interrupts = <1 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + #interrupt-cells = <2>; onkey { compatible = "dlg,da9063-onkey";
arch/riscv/include/asm/pgtable.h +2 -0
@@ -438,9 +438,11 @@ static inline pte_t pte_mkhuge(pte_t pte)return pte; } +#ifdef CONFIG_RISCV_ISA_SVNAPOT #define pte_leaf_size (pte) (pte_napot(pte) ? \ napot_cont_size(napot_cont_order(pte)) :\ PAGE_SIZE) +#endif #ifdef CONFIG_NUMA_BALANCING /*
arch/s390/kernel/cache.c +1 -0
@@ -166,5 +166,6 @@ int populate_cache_leaves(unsigned int cpu)ci_leaf_init (this_leaf++, pvt, ctype, level, cpu); } } + this_cpu_ci->cpu_map_populated = true;return 0 ; }
arch/s390/kernel/perf_pai_crypto.c +1 -1
@@ -646,7 +646,7 @@ static int __init attr_event_init(void)for (i =0 ; i <ARRAY_SIZE (paicrypt_ctrnames); i++) { ret =attr_event_init_one (attrs, i);if (ret) { -attr_event_free (attrs, i -1 ); +attr_event_free (attrs, i);return ret; } }
arch/s390/kernel/perf_pai_ext.c +1 -1
@@ -607,7 +607,7 @@ static int __init attr_event_init(void)for (i =0 ; i <ARRAY_SIZE (paiext_ctrnames); i++) { ret =attr_event_init_one (attrs, i);if (ret) { -attr_event_free (attrs, i -1 ); +attr_event_free (attrs, i);return ret; } }
arch/s390/kernel/vdso32/Makefile +1 -1
@@ -22,7 +22,7 @@ KBUILD_CFLAGS_32 := $(filter-out -m64,$(KBUILD_CFLAGS)) KBUILD_CFLAGS_32 := $(filter-out -mno-pic-data-is-text-relative,$(KBUILD_CFLAGS_32)) KBUILD_CFLAGS_32 += -m31 -fPIC -shared -fno-common -fno-builtin -LDFLAGS_vdso32.so.dbg += -fPIC -shared -soname=linux-vdso32.so.1 \ +LDFLAGS_vdso32.so.dbg += -shared -soname=linux-vdso32.so.1 \ --hash-style=both --build-id=sha1 -melf_s390 -T $(targets:%=$(obj)/%.dbg): KBUILD_CFLAGS = $(KBUILD_CFLAGS_32)
arch/s390/kernel/vdso64/Makefile +1 -1
@@ -26,7 +26,7 @@ KBUILD_AFLAGS_64 += -m64 KBUILD_CFLAGS_64 := $(filter-out -m64,$(KBUILD_CFLAGS)) KBUILD_CFLAGS_64 := $(filter-out -mno-pic-data-is-text-relative,$(KBUILD_CFLAGS_64)) KBUILD_CFLAGS_64 += -m64 -fPIC -fno-common -fno-builtin -ldflags-y := -fPIC -shared -soname=linux-vdso64.so.1 \ +ldflags-y := -shared -soname=linux-vdso64.so.1 \ --hash-style=both --build-id=sha1 -T $(targets:%=$(obj)/%.dbg): KBUILD_CFLAGS = $(KBUILD_CFLAGS_64)
arch/s390/kernel/vtime.c +2 -2
@@ -210,13 +210,13 @@ void vtime_flush(struct task_struct *tsk)virt_timer_expire (); steal = S390_lowcore.steal_timer; - avg_steal = S390_lowcore.avg_steal_timer /2 ; + avg_steal = S390_lowcore.avg_steal_timer;if ((s64 ) steal >0 ) { S390_lowcore.steal_timer =0 ;account_steal_time (cputime_to_nsecs (steal)); avg_steal += steal; } - S390_lowcore.avg_steal_timer = avg_steal; + S390_lowcore.avg_steal_timer = avg_steal /2 ; }static u64 vtime_delta (void )
arch/sparc/kernel/leon_pci_grpci1.c +1 -1
@@ -697,7 +697,7 @@ static int grpci1_of_probe(struct platform_device *ofdev)return err; } -static const struct of_device_id grpci1_of_match[]__initconst = { +static const struct of_device_id grpci1_of_match[] = { { .name ="GAISLER_PCIFBRG" , },
arch/sparc/kernel/leon_pci_grpci2.c +1 -1
@@ -889,7 +889,7 @@ static int grpci2_of_probe(struct platform_device *ofdev)return err; } -static const struct of_device_id grpci2_of_match[]__initconst = { +static const struct of_device_id grpci2_of_match[] = { { .name ="GAISLER_GRPCI2" , },
arch/x86/events/amd/core.c +0 -1
@@ -604,7 +604,6 @@ static void amd_pmu_cpu_dead(int cpu)kfree (cpuhw->lbr_sel); cpuhw->lbr_sel =NULL ; -amd_pmu_cpu_reset (cpu);if (!x86_pmu.amd_nb_constraints)return ;
arch/x86/hyperv/hv_vtl.c +22 -4
@@ -12,10 +12,16 @@#include <asm/i8259.h> #include <asm/mshyperv.h> #include <asm/realmode.h> +#include <../kernel/smpboot.h> extern struct boot_params boot_params;static struct real_mode_header hv_vtl_real_mode_header; +static bool __init hv_vtl_msi_ext_dest_id (void ) +{ +return true; +} +void __init hv_vtl_init_platform (void ) {pr_info ("Linux runs in Hyper-V Virtual Trust Level\n" );
@@ -38,6 +44,8 @@ void __init hv_vtl_init_platform(void) x86_platform.legacy.warm_reset =0 ; x86_platform.legacy.reserve_bios_regions =0 ; x86_platform.legacy.devices.pnpbios =0 ; + + x86_init.hyper.msi_ext_dest_id = hv_vtl_msi_ext_dest_id; }static inline u64 hv_vtl_system_desc_base (struct ldttss_desc *desc)
@@ -57,7 +65,7 @@ static void hv_vtl_ap_entry(void) ((secondary_startup_64_fn )secondary_startup_64)(&boot_params, &boot_params); } -static int hv_vtl_bringup_vcpu (u32 target_vp_index,u64 eip_ignored) +static int hv_vtl_bringup_vcpu (u32 target_vp_index,int cpu,u64 eip_ignored) {u64 status;int ret =0 ;
@@ -71,7 +79,9 @@ static int hv_vtl_bringup_vcpu(u32 target_vp_index, u64 eip_ignored)struct ldttss_desc *ldt;struct desc_struct *gdt; -u64 rsp = current->thread.sp; +struct task_struct *idle =idle_thread_get (cpu); +u64 rsp = (unsigned long )idle->thread.sp; +u64 rip = (u64)&hv_vtl_ap_entry;native_store_gdt (&gdt_ptr);
@@ -198,7 +208,15 @@ static int hv_vtl_apicid_to_vp_id(u32 apic_id)static int hv_vtl_wakeup_secondary_cpu (int apicid,unsigned long start_eip) { -int vp_id; +int vp_id, cpu; + +/* Find the logical CPU for the APIC ID */ +for_each_present_cpu (cpu) { +if (arch_match_cpu_phys_id (cpu, apicid)) +break ; + } +if (cpu >= nr_cpu_ids) +return -EINVAL ;pr_debug ("Bringing up CPU with APIC ID %d in VTL2...\n" , apicid); vp_id =hv_vtl_apicid_to_vp_id (apicid);
@@ -212,7 +230,7 @@ static int hv_vtl_wakeup_secondary_cpu(int apicid, unsigned long start_eip)return -EINVAL ; } -return hv_vtl_bringup_vcpu (vp_id, start_eip); +return hv_vtl_bringup_vcpu (vp_id, cpu, start_eip); }int __init hv_vtl_early_init (void )
arch/x86/include/asm/page.h +5 -1
@@ -66,10 +66,14 @@ static inline void copy_user_page(void *to, void *from, unsigned long vaddr,* virt_addr_valid(kaddr) returns true. */ #define virt_to_page (kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) -#define pfn_to_kaddr (pfn) __va((pfn) << PAGE_SHIFT)extern bool __virt_addr_valid (unsigned long kaddr);#define virt_addr_valid (kaddr) __virt_addr_valid((unsigned long) (kaddr)) +static __always_inline void *pfn_to_kaddr(unsigned long pfn) +{ +return __va (pfn <<PAGE_SHIFT ); +} + static __always_inline u64 __canonical_address(u64 vaddr, u8 vaddr_bits) {return ((s64 )vaddr << (64 - vaddr_bits)) >> (64 - vaddr_bits);
arch/x86/include/asm/vsyscall.h +10 -0
@@ -4,6 +4,7 @@#include <linux/seqlock.h> #include <uapi/asm/vsyscall.h> +#include <asm/page_types.h> #ifdef CONFIG_X86_VSYSCALL_EMULATION extern void map_vsyscall (void );
@@ -24,4 +25,13 @@ static inline bool emulate_vsyscall(unsigned long error_code, }#endif +/* +* The (legacy) vsyscall page is the long page in the kernel portion +* of the address space that has user-accessible permissions.
Lines of this file are not shown. View the raw message.
arch/x86/kernel/cpu/resctrl/monitor.c +16 -32
48 lines not on this page · raw message
block/bdev.c +48 -0
48 lines not on this page · raw message
drivers/base/regmap/regmap-kunit.c +38 -16
54 lines not on this page · raw message
drivers/clk/mediatek/clk-mt7622-apmixedsys.c +0 -1
Lines of this file are not shown. View the raw message.
drivers/clk/mediatek/clk-mt7981-topckgen.c +3 -2
Lines of this file are not shown. View the raw message.
drivers/clk/mediatek/clk-mt8135-apmixedsys.c +3 -1
Lines of this file are not shown. View the raw message.
drivers/clk/renesas/r8a779f0-cpg-mssr.c +1 -1
Lines of this file are not shown. View the raw message.
drivers/clk/renesas/r8a779g0-cpg-mssr.c +6 -5
Lines of this file are not shown. View the raw message.
drivers/crypto/intel/qat/qat_4xxx/adf_4xxx_hw_data.c +12 -27
Lines of this file are not shown. View the raw message.
drivers/crypto/intel/qat/qat_common/Makefile +1 -0
Lines of this file are not shown. View the raw message.
drivers/crypto/intel/qat/qat_common/adf_cfg_services.c new file +47 -0
47 lines not on this page · raw message
drivers/crypto/intel/qat/qat_common/adf_cfg_services.h +6 -12
Lines of this file are not shown. View the raw message.
drivers/crypto/intel/qat/qat_common/adf_clock.c +3 -0
Lines of this file are not shown. View the raw message.
drivers/cxl/core/region.c +46 -16
62 lines not on this page · raw message
drivers/firmware/efi/libstub/x86-stub.c +5 -2
Lines of this file are not shown. View the raw message.
drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c +3 -3
Lines of this file are not shown. View the raw message.
drivers/gpu/drm/amd/amdgpu/soc15.c +25 -20
45 lines not on this page · raw message
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +7 -9
Lines of this file are not shown. View the raw message.
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c +1 -1
Lines of this file are not shown. View the raw message.
drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c +5 -2
Lines of this file are not shown. View the raw message.
drivers/gpu/drm/amd/display/dc/link/protocols/link_edp_panel_control.c +2 -1
Lines of this file are not shown. View the raw message.
drivers/gpu/drm/amd/pm/swsmu/smu11/arcturus_ppt.c +2 -2
Lines of this file are not shown. View the raw message.
drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c +2 -2
Lines of this file are not shown. View the raw message.
drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_6_ppt.c +2 -2
Lines of this file are not shown. View the raw message.
drivers/gpu/drm/mediatek/mtk_drm_crtc.c +7 -5
Lines of this file are not shown. View the raw message.
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c +10 -1
Lines of this file are not shown. View the raw message.
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h +7 -0
Lines of this file are not shown. View the raw message.
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c +5 -2
Lines of this file are not shown. View the raw message.
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c +9 -6
Lines of this file are not shown. View the raw message.
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h +1 -0
Lines of this file are not shown. View the raw message.
drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c +2 -0
Lines of this file are not shown. View the raw message.
drivers/gpu/drm/rockchip/rockchip_lvds.c +1 -2
Lines of this file are not shown. View the raw message.
drivers/gpu/drm/tegra/dsi.c +39 -20
59 lines not on this page · raw message
drivers/gpu/drm/vmwgfx/vmwgfx_gmrid_manager.c +4 -1
Lines of this file are not shown. View the raw message.
drivers/hid/amd-sfh-hid/amd_sfh_pcie.c +27 -3
Lines of this file are not shown. View the raw message.
drivers/hid/hid-lenovo.c +39 -18
57 lines not on this page · raw message
drivers/hwtracing/coresight/coresight-core.c +23 -7
Lines of this file are not shown. View the raw message.
drivers/hwtracing/coresight/coresight-etm-perf.c +1 -1
Lines of this file are not shown. View the raw message.
drivers/hwtracing/coresight/coresight-etm4x-core.c +5 -5
Lines of this file are not shown. View the raw message.
drivers/hwtracing/coresight/coresight-priv.h +1 -1
Lines of this file are not shown. View the raw message.
drivers/infiniband/hw/hns/hns_roce_device.h +9 -8
Lines of this file are not shown. View the raw message.
drivers/infiniband/hw/hns/hns_roce_hw_v2.c +10 -6
Lines of this file are not shown. View the raw message.
drivers/infiniband/ulp/rtrs/rtrs-clt-sysfs.c +1 -1
Lines of this file are not shown. View the raw message.
drivers/input/keyboard/gpio_keys_polled.c +4 -6
Lines of this file are not shown. View the raw message.
drivers/input/misc/iqs7222.c +112 -0
112 lines not on this page · raw message
drivers/media/common/v4l2-tpg/v4l2-tpg-core.c +42 -10
52 lines not on this page · raw message
drivers/media/platform/cadence/cdns-csi2rx.c +1 -1
Lines of this file are not shown. View the raw message.
drivers/media/platform/mediatek/mdp/mtk_mdp_vpu.c +1 -1
Lines of this file are not shown. View the raw message.
drivers/media/platform/mediatek/vcodec/common/mtk_vcodec_fw_vpu.c +1 -9
Lines of this file are not shown. View the raw message.
drivers/media/platform/mediatek/vpu/mtk_vpu.c +1 -1
Lines of this file are not shown. View the raw message.
drivers/media/platform/mediatek/vpu/mtk_vpu.h +1 -1
Lines of this file are not shown. View the raw message.
drivers/media/platform/rockchip/rkisp1/rkisp1-capture.c +3 -0
Lines of this file are not shown. View the raw message.
drivers/media/platform/rockchip/rkisp1/rkisp1-common.h +2 -0
Lines of this file are not shown. View the raw message.
drivers/media/platform/rockchip/rkisp1/rkisp1-csi.c +3 -0
Lines of this file are not shown. View the raw message.
drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c +22 -0
Lines of this file are not shown. View the raw message.
drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c +3 -0
Lines of this file are not shown. View the raw message.
drivers/media/platform/sunxi/sun8i-di/sun8i-di.c +35 -34
69 lines not on this page · raw message
drivers/media/usb/em28xx/em28xx-cards.c +4 -0
Lines of this file are not shown. View the raw message.
drivers/media/usb/go7007/go7007-driver.c +5 -3
Lines of this file are not shown. View the raw message.
drivers/media/usb/pvrusb2/pvrusb2-context.c +5 -5
Lines of this file are not shown. View the raw message.
drivers/media/usb/pvrusb2/pvrusb2-dvb.c +4 -2
Lines of this file are not shown. View the raw message.
drivers/media/usb/pvrusb2/pvrusb2-v4l2.c +4 -7
Lines of this file are not shown. View the raw message.
drivers/mfd/cs42l43.c +36 -36
72 lines not on this page · raw message
drivers/misc/mei/gsc_proxy/mei_gsc_proxy.c +5 -3
Lines of this file are not shown. View the raw message.
drivers/net/dsa/mt7530.c +48 -12
60 lines not on this page · raw message
drivers/net/ethernet/amazon/ena/ena_netdev.c +0 -17
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h +3 -3
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/hisilicon/hns3/hns3_dcbnl.c +1 -1
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +4 -1
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_ptp.c +1 -1
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/intel/ice/ice_main.c +11 -13
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/intel/igb/igb_main.c +5 -18
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/intel/igc/igc_main.c +1 -11
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/marvell/octeontx2/af/cgx.c +1 -1
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/marvell/octeontx2/af/mbox.c +41 -2
43 lines not on this page · raw message
drivers/net/ethernet/marvell/octeontx2/af/mbox.h +6 -0
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/marvell/octeontx2/af/mcs_rvu_if.c +11 -6
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/marvell/octeontx2/af/rvu.c +25 -6
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/marvell/octeontx2/af/rvu.h +2 -0
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c +13 -7
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c +1 -1
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h +1 -1
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c +82 -37
119 lines not on this page · raw message
drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c +43 -28
71 lines not on this page · raw message
drivers/net/ethernet/mediatek/mtk_eth_soc.c +3 -4
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/mediatek/mtk_ppe.c +11 -7
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/netronome/nfp/flower/lag_conf.c +5 -0
Lines of this file are not shown. View the raw message.
drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c +1 -1
Lines of this file are not shown. View the raw message.
drivers/net/wireless/ath/ath10k/wmi-tlv.c +4 -0
Lines of this file are not shown. View the raw message.
drivers/net/wireless/ath/ath12k/dbring.c +1 -1
Lines of this file are not shown. View the raw message.
drivers/net/wireless/ath/ath12k/debug.c +1 -1
Lines of this file are not shown. View the raw message.
drivers/net/wireless/ath/ath12k/dp_tx.c +1 -1
Lines of this file are not shown. View the raw message.
drivers/net/wireless/ath/ath12k/hal_rx.c +1 -1
Lines of this file are not shown. View the raw message.
drivers/net/wireless/ath/ath12k/rx_desc.h +1 -1
Lines of this file are not shown. View the raw message.
drivers/net/wireless/ath/ath9k/htc_drv_init.c +4 -0
Lines of this file are not shown. View the raw message.
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c +0 -4
Lines of this file are not shown. View the raw message.
drivers/net/wireless/broadcom/b43/b43.h +16 -0
Lines of this file are not shown. View the raw message.
drivers/net/wireless/broadcom/b43/dma.c +2 -2
Lines of this file are not shown. View the raw message.
drivers/net/wireless/broadcom/b43/main.c +9 -7
Lines of this file are not shown. View the raw message.
drivers/net/wireless/broadcom/b43/pio.c +3 -3
Lines of this file are not shown. View the raw message.
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +3 -0
Lines of this file are not shown. View the raw message.
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_cmn.c +2 -1
Lines of this file are not shown. View the raw message.
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.c +2 -3
Lines of this file are not shown. View the raw message.
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.h +1 -1
Lines of this file are not shown. View the raw message.
drivers/net/wireless/intel/iwlwifi/fw/acpi.c +6 -6
Lines of this file are not shown. View the raw message.
drivers/net/wireless/intel/iwlwifi/fw/acpi.h +1 -1
Lines of this file are not shown. View the raw message.
drivers/net/wireless/intel/iwlwifi/fw/pnvm.c +18 -12
Lines of this file are not shown. View the raw message.
drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c +6 -0
Lines of this file are not shown. View the raw message.
drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c +1 -1
Lines of this file are not shown. View the raw message.
drivers/net/wireless/intel/iwlwifi/mvm/d3.c +8 -4
Lines of this file are not shown. View the raw message.
drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +21 -4
Lines of this file are not shown. View the raw message.
drivers/net/wireless/intel/iwlwifi/mvm/mld-key.c +11 -7
Lines of this file are not shown. View the raw message.
drivers/net/wireless/intel/iwlwifi/mvm/mld-mac.c +1 -1
Lines of this file are not shown. View the raw message.
drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c +15 -11
Lines of this file are not shown. View the raw message.
drivers/net/wireless/intel/iwlwifi/mvm/tx.c +68 -13
81 lines not on this page · raw message
drivers/net/wireless/marvell/libertas/cmd.c +11 -2
Lines of this file are not shown. View the raw message.
drivers/net/wireless/marvell/mwifiex/debugfs.c +0 -3
Lines of this file are not shown. View the raw message.
drivers/net/wireless/mediatek/mt76/mt7921/pci.c +1 -0
Lines of this file are not shown. View the raw message.
drivers/net/wireless/mediatek/mt76/mt792x_acpi_sar.c +14 -12
Lines of this file are not shown. View the raw message.
drivers/net/wireless/mediatek/mt76/mt792x_core.c +1 -0
Lines of this file are not shown. View the raw message.
drivers/net/wireless/mediatek/mt76/mt792x_dma.c +2 -0
Lines of this file are not shown. View the raw message.
drivers/net/wireless/mediatek/mt76/mt7996/init.c +4 -3
Lines of this file are not shown. View the raw message.
drivers/net/wireless/mediatek/mt76/mt7996/mac.c +45 -8
53 lines not on this page · raw message
drivers/net/wireless/mediatek/mt76/mt7996/mcu.c +15 -3
Lines of this file are not shown. View the raw message.
drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h +2 -1
Lines of this file are not shown. View the raw message.
drivers/net/wireless/microchip/wilc1000/cfg80211.c +10 -2
Lines of this file are not shown. View the raw message.
drivers/net/wireless/microchip/wilc1000/hif.c +26 -14
Lines of this file are not shown. View the raw message.
drivers/net/wireless/microchip/wilc1000/netdev.c +8 -30
Lines of this file are not shown. View the raw message.
drivers/net/wireless/microchip/wilc1000/spi.c +3 -3
Lines of this file are not shown. View the raw message.
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +1 -0
Lines of this file are not shown. View the raw message.
drivers/net/wireless/realtek/rtw88/main.c +0 -2
Lines of this file are not shown. View the raw message.
drivers/net/wireless/realtek/rtw88/phy.c +3 -0
Lines of this file are not shown. View the raw message.
drivers/net/wireless/realtek/rtw88/rtw8821c.c +1 -1
Lines of this file are not shown. View the raw message.
drivers/net/wireless/realtek/rtw88/usb.c +40 -0
Lines of this file are not shown. View the raw message.
drivers/pci/endpoint/functions/pci-epf-vntb.c +1 -5
Lines of this file are not shown. View the raw message.
drivers/pinctrl/mediatek/pinctrl-mt8186.c +0 -1
Lines of this file are not shown. View the raw message.
drivers/pinctrl/mediatek/pinctrl-mt8192.c +0 -1
Lines of this file are not shown. View the raw message.
drivers/pinctrl/nomadik/pinctrl-nomadik.c +4 -2
Lines of this file are not shown. View the raw message.
drivers/pinctrl/renesas/pfc-r8a779g0.c +14 -0
Lines of this file are not shown. View the raw message.
drivers/platform/x86/x86-android-tablets/other.c +2 -2
Lines of this file are not shown. View the raw message.
drivers/s390/block/dasd.c +25 -30
55 lines not on this page · raw message
drivers/staging/media/imx/imx-media-csc-scaler.c +1 -0
Lines of this file are not shown. View the raw message.
drivers/staging/media/sunxi/cedrus/cedrus_h265.c +4 -6
Lines of this file are not shown. View the raw message.
drivers/thermal/mediatek/lvts_thermal.c +3 -1
Lines of this file are not shown. View the raw message.
fs/erofs/super.c +11 -39
50 lines not on this page · raw message
fs/f2fs/compress.c +27 -16
43 lines not on this page · raw message
fs/f2fs/data.c +30 -43
73 lines not on this page · raw message
fs/f2fs/f2fs.h +82 -27
109 lines not on this page · raw message
fs/f2fs/file.c +48 -46
94 lines not on this page · raw message
fs/f2fs/inode.c +14 -43
57 lines not on this page · raw message
fs/nfs/pnfs_nfs.c +43 -1
44 lines not on this page · raw message
fs/overlayfs/params.c +181 -149
330 lines not on this page · raw message
fs/pstore/inode.c +29 -47
76 lines not on this page · raw message
fs/quota/dquot.c +93 -66
159 lines not on this page · raw message
fs/smb/client/file.c +162 -133
295 lines not on this page · raw message
include/dt-bindings/clock/r8a779g0-cpg-mssr.h +1 -0
Lines of this file are not shown. View the raw message.
include/net/bluetooth/l2cap.h +0 -42
42 lines not on this page · raw message
io_uring/io_uring.c +53 -108
161 lines not on this page · raw message
io_uring/net.c +147 -113
260 lines not on this page · raw message
io_uring/rsrc.c +4 -165
169 lines not on this page · raw message
kernel/workqueue.c +629 -126
755 lines not on this page · raw message
net/bluetooth/a2mp.c deleted +0 -1054
1,054 lines not on this page · raw message
net/bluetooth/a2mp.h deleted +0 -154
154 lines not on this page · raw message
net/bluetooth/amp.c deleted +0 -590
590 lines not on this page · raw message
net/bluetooth/amp.h deleted +0 -60
60 lines not on this page · raw message
net/bluetooth/hci_core.c +87 -39
126 lines not on this page · raw message
net/bluetooth/hci_event.c +23 -20
43 lines not on this page · raw message
net/bluetooth/hci_sync.c +29 -12
41 lines not on this page · raw message
net/bluetooth/l2cap_core.c +18 -1051
1,069 lines not on this page · raw message
net/bluetooth/mgmt.c +10 -91
101 lines not on this page · raw message
net/ipv4/inet_timewait_sock.c +19 -22
41 lines not on this page · raw message
scripts/clang-tools/gen_compile_commands.py +1 -1
Lines of this file are not shown. View the raw message.
sound/pci/hda/patch_realtek.c +64 -0
64 lines not on this page · raw message
sound/pci/hda/tas2781_hda_i2c.c +30 -32
62 lines not on this page · raw message
sound/soc/rockchip/rockchip_i2s_tdm.c +6 -346
352 lines not on this page · raw message
tools/bpf/resolve_btfids/main.c +56 -14
70 lines not on this page · raw message
tools/testing/selftests/bpf/bpf_testmod/bpf_testmod.c +9 -0
Lines of this file are not shown. View the raw message.
tools/testing/selftests/bpf/prog_tests/lwt_redirect.c +1 -0
Lines of this file are not shown. View the raw message.
tools/testing/selftests/bpf/prog_tests/tc_redirect.c +276 -131
407 lines not on this page · raw message
tools/testing/selftests/bpf/progs/test_map_in_map.c +26 -0
Lines of this file are not shown. View the raw message.
tools/testing/selftests/bpf/test_maps.c +5 -1
Lines of this file are not shown. View the raw message.
tools/testing/selftests/net/forwarding/config +35 -0
Lines of this file are not shown. View the raw message.
tools/testing/selftests/net/forwarding/vxlan_bridge_1d_ipv6.sh +2 -2
Lines of this file are not shown. View the raw message.
tools/testing/selftests/net/forwarding/vxlan_bridge_1q_ipv6.sh +2 -2
Lines of this file are not shown. View the raw message.
tools/testing/selftests/net/openvswitch/openvswitch.sh +13 -0
Lines of this file are not shown. View the raw message.
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +56 -15
71 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Part of the diff is not shown here. View the raw message.