Skip to contentSkip to conversation

perf sched: Rename switches to count and add usage description, options for latency

PATCH Applied Madadi Vineeth Reddy 3 participants 4 messages Mar 28, 2024 – May 10, 2024 perf events

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 perf sched: Rename switches to count and add usage description, options for latency

Rename 'Switches' to 'Count' and document metrics shown for perf sched latency output. Also add options possible with perf sched latency.

Initially, after seeing the output of 'perf sched latency', the term 'Switches' seemed like it's the number of context switches-in for a particular task, but upon going through the code, it was observed that it's actually keeping track of number of times a delay was calculated so that it is used in calculation of the average delay.

Actually, the switches here is a subset of number of context switches-in because there are some cases where the count is not incremented in switch-in handler 'add_sched_in_event'. For example when a task is switched-in while it's state is not ready to run(!= THREAD_WAIT_CPU).

commit d9340c1db3f5 ("perf sched: Display time in milliseconds, reorganize output") changed it from the original count to switches.

So, renamed switches to count to make things a bit more clearer and added the metrics description of latency in the document.

---
 tools/perf/Documentation/perf-sched.txt | 36 +++++++++++++++++++++++++
 tools/perf/builtin-sched.c              |  2 +-
 2 files changed, 37 insertions(+), 1 deletion(-)
tools/perf/Documentation/perf-sched.txt +36 -0
index 5fbe42bd599b..a216d2991b19 100644
@@ -20,6 +20,26 @@ There are several variants of 'perf sched':
   'perf sched latency' to report the per task scheduling latencies
   and other scheduling properties of the workload.
 
+   Example usage:
+       perf sched record -- sleep 1
+       perf sched latency
+
+  -------------------------------------------------------------------------------------------------------------------------------------------
+  Task                  |   Runtime ms  |  Count   | Avg delay ms    | Max delay ms    | Max delay start           | Max delay end          |
+  -------------------------------------------------------------------------------------------------------------------------------------------
+  perf:(2)              |      2.804 ms |       66 | avg:   0.524 ms | max:   1.069 ms | max start: 254752.314960 s | max end: 254752.316029 s
+  NetworkManager:1343   |      0.372 ms |       13 | avg:   0.008 ms | max:   0.013 ms | max start: 254751.551153 s | max end: 254751.551166 s
+  kworker/1:2-xfs:4649  |      0.012 ms |        1 | avg:   0.008 ms | max:   0.008 ms | max start: 254751.519807 s | max end: 254751.519815 s
+  kworker/3:1-xfs:388   |      0.011 ms |        1 | avg:   0.006 ms | max:   0.006 ms | max start: 254751.519809 s | max end: 254751.519815 s
+  sleep:147736          |      0.938 ms |        3 | avg:   0.006 ms | max:   0.007 ms | max start: 254751.313817 s | max end: 254751.313824 s
+
+  It shows Runtime(time that a task spent actually running on the CPU),
+  Count(number of times a delay was calculated) and delay(time that a
+  task was ready to run but was kept waiting).
+
+  Tasks with the same command name are merged and the merge count is
+  given within (), However if -p option is used, pid is mentioned.
+
   'perf sched script' to see a detailed trace of the workload that
    was recorded (aliased to 'perf script' for now).
 
@@ -78,6 +98,22 @@ OPTIONS
 --force::
 	Don't complain, do it.
 
+OPTIONS for 'perf sched latency'
+-------------------------------
+
+-C::
+--CPU <n>::
+        CPU to profile on.
+
+-p::
+--pids::
+        latency stats per pid instead of per command name.
+
+-s::
+--sort <key[,key2...]>::
+        sort by key(s): runtime, switch, avg, max
+        by default it's sorted by "avg ,max ,switch ,runtime".
+
 OPTIONS for 'perf sched map'
 ----------------------------
 
tools/perf/builtin-sched.c +1 -1
index b248c433529a..e66a935eab6f 100644
@@ -3210,7 +3210,7 @@ static int perf_sched__lat(struct perf_sched *sched)
 	perf_sched__sort_lat(sched);
 
 	printf("\n -------------------------------------------------------------------------------------------------------------------------------------------\n");
-	printf("  Task                  |   Runtime ms  | Switches | Avg delay ms    | Max delay ms    | Max delay start           | Max delay end          |\n");
+	printf("  Task                  |   Runtime ms  |  Count   | Avg delay ms    | Max delay ms    | Max delay start           | Max delay end          |\n");
 	printf(" -------------------------------------------------------------------------------------------------------------------------------------------\n");
 
 	next = rb_first_cached(&sched->sorted_atom_root);
Signature · 1 line
2.39.1
#1 lore raw
Quoted 15 lines · Madadi Vineeth Reddy

Rename 'Switches' to 'Count' and document metrics shown for perf sched latency output. Also add options possible with perf sched latency.

Initially, after seeing the output of 'perf sched latency', the term 'Switches' seemed like it's the number of context switches-in for a particular task, but upon going through the code, it was observed that it's actually keeping track of number of times a delay was calculated so that it is used in calculation of the average delay.

Actually, the switches here is a subset of number of context switches-in because there are some cases where the count is not incremented in switch-in handler 'add_sched_in_event'. For example when a task is switched-in while it's state is not ready to run(!= THREAD_WAIT_CPU).

Quoted 8 lines

commit d9340c1db3f5 ("perf sched: Display time in milliseconds, reorganize output") changed it from the original count to switches.

So, renamed switches to count to make things a bit more clearer and added the metrics description of latency in the document.

---

Hi Arnaldo,
Any comments on this patch?

Thanks and Regards
Madadi Vineeth Reddy

Reviewed-by on v1 1/1
#2 lore raw
In reply to Madadi Vineeth Reddy

Hello vineeth,

Quoted 15 lines · Madadi Vineeth Reddy

Rename 'Switches' to 'Count' and document metrics shown for perf sched latency output. Also add options possible with perf sched latency.

Initially, after seeing the output of 'perf sched latency', the term 'Switches' seemed like it's the number of context switches-in for a particular task, but upon going through the code, it was observed that it's actually keeping track of number of times a delay was calculated so that it is used in calculation of the average delay.

Actually, the switches here is a subset of number of context switches-in because there are some cases where the count is not incremented in switch-in handler 'add_sched_in_event'. For example when a task is switched-in while it's state is not ready to run(!= THREAD_WAIT_CPU).

Quoted 7 lines

commit d9340c1db3f5 ("perf sched: Display time in milliseconds, reorganize output") changed it from the original count to switches.

So, renamed switches to count to make things a bit more clearer and added the metrics description of latency in the document.

Makes sense to me. 'Switches' seems to be context switches, so it might be better kept as 'Count' only.

Hence,

Thanks,
Aditya Gupta

maintainer Applied
#3 lore raw
Quoted 24 lines · Aditya Gupta

Hello vineeth,

Quoted 21 lines · Madadi Vineeth Reddy

Rename 'Switches' to 'Count' and document metrics shown for perf sched latency output. Also add options possible with perf sched latency.

Initially, after seeing the output of 'perf sched latency', the term 'Switches' seemed like it's the number of context switches-in for a particular task, but upon going through the code, it was observed that it's actually keeping track of number of times a delay was calculated so that it is used in calculation of the average delay.

Actually, the switches here is a subset of number of context switches-in because there are some cases where the count is not incremented in switch-in handler 'add_sched_in_event'. For example when a task is switched-in while it's state is not ready to run(!= THREAD_WAIT_CPU).

commit d9340c1db3f5 ("perf sched: Display time in milliseconds, reorganize output") changed it from the original count to switches.

So, renamed switches to count to make things a bit more clearer and added the metrics description of latency in the document.

Quoted 8 lines
Quoted 1 line

Makes sense to me. 'Switches' seems to be context switches, so it might be better kept as 'Count' only.

Hence,

Thanks, applied to perf-tools-next,

- Arnaldo

- Arnaldo