net: phy: the NC-SI phy device do not require mdio bus
Subsystems (2)
PATCH 1/1 net: phy: the NC-SI phy device do not require mdio bus
As with fixed-link phy device, the NC-SI phy devive does not require an mdio bus. So, a condition is added to check the NC-SI phy id to avoid accessing the bus pointer that is NULL.
Signed-off-by Jacky Chou <[email protected]>
--- drivers/net/phy/phy.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/phy/phy.c +2 -1
@@ -566,7 +566,8 @@ struct phy_device *phy_device_create(struct mii_dev *bus, int addr,return NULL ; } -if (addr >=0 && addr <PHY_MAX_ADDR && phy_id !=PHY_FIXED_ID ) +if (addr >=0 && addr <PHY_MAX_ADDR && phy_id !=PHY_FIXED_ID && + phy_id !=PHY_NCSI_ID ) bus->phymap[addr] = dev;return dev;
Signature · 1 line
2.34.1
Quoted 5 lines · Jacky Chou
As with fixed-link phy device, the NC-SI phy devive does not require an mdio bus. So, a condition is added to check the NC-SI phy id to avoid accessing the bus pointer that is NULL.
Signed-off-by Jacky Chou <[email protected]>
Reviewed-by Marek Vasut <[email protected]>
Thanks !
Quoted 5 lines · Jacky Chou
As with fixed-link phy device, the NC-SI phy devive does not require an mdio bus. So, a condition is added to check the NC-SI phy id to avoid accessing the bus pointer that is NULL.
Signed-off-by Jacky Chou <[email protected]>
Applied to u-boot/next, thanks!
Signature · 1 line
Tom