tools: iio: replace seekdir() in iio_generic_buffer
Subsystems (6)
Sasha Levin
maintainerPATCH 1/8 tools: iio: replace seekdir() in iio_generic_buffer
From: Petre Rodan <[email protected]>
[ Upstream commit 4e6500bfa053dc133021f9c144261b77b0ba7dc8 ]
Replace seekdir() with rewinddir() in order to fix a localized glibc bug.
One of the glibc patches that stable Gentoo is using causes an improper directory stream positioning bug on 32bit arm. That in turn ends up as a floating point exception in iio_generic_buffer.
The attached patch provides a fix by using an equivalent function which should not cause trouble for other distros and is easier to reason about in general as it obviously always goes back to to the start.
https://sourceware.org/bugzilla/show_bug.cgi?id=31212
--- tools/iio/iio_utils.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
tools/iio/iio_utils.c +1 -1
@@ -373,7 +373,7 @@ int build_channel_array(const char *device_dir, goto error_close_dir; } -seekdir (dp,0 ); +rewinddir (dp);while (ent =readdir (dp), ent) {if (strcmp (ent->d_name +strlen (ent->d_name) -strlen ("_en" ),"_en" ) ==0 ) {
Signature · 1 line
2.43.0
Sasha Levin
maintainerPATCH 2/8 usb: storage: sddr55: fix sloppy typing in sddr55_{read|write}_data()
From: Karina Yankevich <[email protected]>
[ Upstream commit d6429a3555fb29f380c5841a12f5ac3f7444af03 ]
In sddr55_{read|write}_data(), the address variables are needlessly typed as *unsigned long* -- which is 32-bit type on the 32-bit arches and 64-bit type on the 64-bit arches; those variables' value should fit into just 3 command bytes and consists of 10-bit block # (or at least the max block # seems to be 1023) and 4-/5-bit page # within a block, so 32-bit *unsigned* *int* type should be more than enough...
Found by Linux Verification Center (linuxtesting.org) with the Svace static analysis tool.
[Sergey: rewrote the patch subject/description]
--- drivers/usb/storage/sddr55.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/usb/storage/sddr55.c +2 -2
@@ -196,7 +196,7 @@ static int sddr55_read_data(struct us_data *us,unsigned char *buffer;unsigned int pba; -unsigned long address; +unsigned int address;unsigned short pages;unsigned int len, offset;
@@ -316,7 +316,7 @@ static int sddr55_write_data(struct us_data *us,unsigned int pba;unsigned int new_pba; -unsigned long address; +unsigned int address;unsigned short pages;int i;
Signature · 1 line
2.43.0
Sasha Levin
maintainerPATCH 3/8 usb: typec: tcpci: add generic tcpci fallback compatible
In reply to Sasha LevinFrom: Marco Felsch <[email protected]>
[ Upstream commit 8774ea7a553e2aec323170d49365b59af0a2b7e0 ]
The driver already support the tcpci binding for the i2c_device_id so add the support for the of_device_id too.
--- drivers/usb/typec/tcpm/tcpci.c | 1 + 1 file changed, 1 insertion(+)
drivers/usb/typec/tcpm/tcpci.c +1 -0
@@ -732,6 +732,7 @@ MODULE_DEVICE_TABLE(i2c, tcpci_id);#ifdef CONFIG_OF static const struct of_device_id tcpci_of_match[] = { { .compatible ="nxp,ptn5110" , }, + { .compatible ="tcpci" , }, {}, };MODULE_DEVICE_TABLE (of, tcpci_of_match);
Signature · 1 line
2.43.0
Sasha Levin
maintainerPATCH 4/8 usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined
In reply to Sasha LevinFrom: Colin Ian King <[email protected]>
[ Upstream commit 12f371e2b6cb4b79c788f1f073992e115f4ca918 ]
Function checkdone is only required if QUIRK2 is defined, so add appropriate #if / #endif around the function.
Cleans up clang scan build warning:drivers/usb/host/sl811-hcd.c:588:18: warning: unused function 'checkdone' [-Wunused-function]
--- drivers/usb/host/sl811-hcd.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/usb/host/sl811-hcd.c +2 -0
@@ -585,6 +585,7 @@ done(struct sl811 *sl811, struct sl811h_ep *ep, u8 bank)finish_request (sl811, ep, urb, urbstat); } +#ifdef QUIRK2 static inline u8 checkdone (struct sl811 *sl811) {u8 ctl;
@@ -616,6 +617,7 @@ static inline u8 checkdone(struct sl811 *sl811)#endif return irqstat; } +#endif static irqreturn_t sl811h_irq (struct usb_hcd *hcd) {
Signature · 1 line
2.43.0
Sasha Levin
maintainerPATCH 5/8 ASoC: soc-core.c: Skip dummy codec when adding platforms
In reply to Sasha LevinFrom: Chancel Liu <[email protected]>
[ Upstream commit 23fb6bc2696119391ec3a92ccaffe50e567c515e ]
When pcm_runtime is adding platform components it will scan all registered components. In case of DPCM FE/BE some DAI links will configure dummy platform. However both dummy codec and dummy platform are using "snd-soc-dummy" as component->name. Dummy codec should be skipped when adding platforms otherwise there'll be overflow and UBSAN complains.
--- sound/soc/soc-core.c | 3 +++ 1 file changed, 3 insertions(+)
sound/soc/soc-core.c +3 -0
@@ -1041,6 +1041,9 @@ int snd_soc_add_pcm_runtime(struct snd_soc_card *card,if (!snd_soc_is_matching_component (platform, component))continue ; +if (snd_soc_component_is_dummy (component) && component->num_dai) +continue ; +snd_soc_rtd_add_component (rtd, component); } }
Signature · 1 line
2.43.0
Sasha Levin
maintainerPATCH 6/8 fbdev: viafb: fix typo in hw_bitblt_1 and hw_bitblt_2
In reply to Sasha LevinFrom: Aleksandr Burakov <[email protected]>
[ Upstream commit bc87bb342f106a0402186bcb588fcbe945dced4b ]
There are some actions with value 'tmp' but 'dst_addr' is checked instead. It is obvious that a copy-paste error was made here and the value of variable 'tmp' should be checked here.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
--- drivers/video/fbdev/via/accel.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/video/fbdev/via/accel.c +2 -2
@@ -115,7 +115,7 @@ static int hw_bitblt_1(void __iomem *engine, u8 op, u32 width, u32 height,if (op !=VIA_BITBLT_FILL ) { tmp = src_mem ?0 : src_addr; -if (dst_addr &0xE0000007 ) { +if (tmp &0xE0000007 ) {printk (KERN_WARNING "hw_bitblt_1: Unsupported source " "address %X\n" , tmp);return -EINVAL ;
@@ -260,7 +260,7 @@ static int hw_bitblt_2(void __iomem *engine, u8 op, u32 width, u32 height,writel (tmp, engine +0x18 ); tmp = src_mem ?0 : src_addr; -if (dst_addr &0xE0000007 ) { +if (tmp &0xE0000007 ) {printk (KERN_WARNING "hw_bitblt_2: Unsupported source " "address %X\n" , tmp);return -EINVAL ;
Signature · 1 line
2.43.0
Sasha Levin
maintainerPATCH 7/8 drivers/nvme: Add quirks for device 126f:2262
In reply to Sasha LevinFrom: "Jiawei Fu (iBug)" <[email protected]>
[ Upstream commit e89086c43f0500bc7c4ce225495b73b8ce234c1f ]
This commit adds NVME_QUIRK_NO_DEEPEST_PS and NVME_QUIRK_BOGUS_NID for device [126f:2262], which appears to be a generic VID:PID pair used for many SSDs based on the Silicon Motion SM2262/SM2262EN controller.
Two of my SSDs with this VID:PID pair exhibit the same behavior:
* They frequently have trouble exiting the deepest power state (5), resulting in the entire disk unresponsive.
Verified by setting nvme_core.default_ps_max_latency_us=10000 and observing them behaving normally.
* They produce all-zero nguid and eui64 with nvme id-ns command.
The offending products are:
* HP SSD EX950 1TB
* HIKVISION C2000Pro 2TB
--- drivers/nvme/host/pci.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/nvme/host/pci.c +3 -0
@@ -3199,6 +3199,9 @@ static const struct pci_device_id nvme_id_table[] = { NVME_QUIRK_BOGUS_NID, }, { PCI_VDEVICE(REDHAT, 0x0010), /* Qemu emulated controller */ .driver_data = NVME_QUIRK_BOGUS_NID, }, + { PCI_DEVICE(0x126f, 0x2262), /* Silicon Motion generic */ + .driver_data = NVME_QUIRK_NO_DEEPEST_PS | + NVME_QUIRK_BOGUS_NID, }, { PCI_DEVICE(0x126f, 0x2263), /* Silicon Motion unidentified */ .driver_data = NVME_QUIRK_NO_NS_DESC_LIST, }, { PCI_DEVICE(0x1bb1, 0x0100), /* Seagate Nytro Flash Storage */
Signature · 1 line
2.43.0
Sasha Levin
maintainerPATCH 8/8 fbmon: prevent division by zero in fb_videomode_from_videomode()
In reply to Sasha LevinFrom: Roman Smirnov <[email protected]>
[ Upstream commit c2d953276b8b27459baed1277a4fdd5dd9bd4126 ]
The expression htotal * vtotal can have a zero value on overflow. It is necessary to prevent division by zero like in fb_var_to_videomode().
Found by Linux Verification Center (linuxtesting.org) with Svace.
--- drivers/video/fbdev/core/fbmon.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/video/fbdev/core/fbmon.c +4 -3
@@ -1311,7 +1311,7 @@ int fb_get_mode(int flags, u32 val, struct fb_var_screeninfo *var, struct fb_infint fb_videomode_from_videomode (const struct videomode *vm,struct fb_videomode *fbmode) { -unsigned int htotal, vtotal; +unsigned int htotal, vtotal, total; fbmode->xres = vm->hactive; fbmode->left_margin = vm->hback_porch;
@@ -1344,8 +1344,9 @@ int fb_videomode_from_videomode(const struct videomode *vm, vtotal = vm->vactive + vm->vfront_porch + vm->vback_porch + vm->vsync_len;/* prevent division by zero */ -if (htotal && vtotal) { - fbmode->refresh = vm->pixelclock / (htotal * vtotal); + total = htotal * vtotal; +if (total) { + fbmode->refresh = vm->pixelclock / total;/* a mode must have htotal and vtotal != 0 or it is invalid */ }else { fbmode->refresh =0 ;
Signature · 1 line
2.43.0