DC Patches April 3, 2024
Subsystems (5)
cover DC Patches April 3, 2024
Alex Hung (1):
drm/amd/display: Return max resolution supported by DWB
Allen Pan (1):
drm/amd/display: expand the non standard link rate for testing
Anthony Koo (1):
drm/amd/display: [FW Promotion] Release 0.0.212.0
Aric Cyr (1):
drm/amd/display: 3.2.280
Charlene Liu (1):
drm/amd/display: add dwb support to dml2
Dillon Varone (2):
drm/amd/display: Add driver support for future FAMS versions drm/amd/display: Do not recursively call manual trigger programming
Fudongwang (1):
drm/amd/display: fix disable otg wa logic in DCN316
George Shen (1):
drm/amd/display: Rebuild test pattern params for
DP_TEST_PATTERN_VIDEO_MODE
Harry Wentland (2):
drm/amd/display: Program VSC SDP colorimetry for all DP sinks >= 1.4 drm/amd/display: Set VSC SDP Colorimetry same way for MST and SST
Lewis Huang (1):
drm/amd/display: Add option to configure mapping policy for edp0 on
dp1
Parandhaman K (1):
drm/amd/display: refactor vpg.h
Qili Lu (1):
Revert "drm/amd/display: Enabling urgent latency adjustment for DCN35"
Rodrigo Siqueira (11):
drm/amd/display: Add V_TOTAL_REGS to dcn10 drm/amd/display: Add comments to improve the code readability drm/amd/display: Adjust some includes used by display drm/amd/display: Drop legacy code
drm/amd/display: Update resource capabilities and debug struct for
DCN201
drm/amd/display: Disable P010 Support of DCN 1.0 drm/amd/display: Update DCN10 resource drm/amd/display: Add fallback configuration when set DRR drm/amd/display: Add fallback configuration for set DRR in DCN10 drm/amd/display: Change DPCD address range drm/amd/display: Reorganize dwb header
Wenjing Liu (2):
drm/amd/display: always reset ODM mode in context when adding first
plane
drm/amd/display: fix an incorrect ODM policy assigned for subvp
Zhongwei (1):
drm/amd/display: Adjust dprefclk by down spread percentage.
.../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 15 ++--- .../drm/amd/display/amdgpu_dm/amdgpu_dm_wb.c | 6 +- .../gpu/drm/amd/display/dc/bios/bios_parser.c | 2 - .../display/dc/clk_mgr/dcn10/rv1_clk_mgr.c | 1 - .../dc/clk_mgr/dcn10/rv1_clk_mgr_vbios_smu.c | 1 - .../dc/clk_mgr/dcn30/dcn30_clk_mgr_smu_msg.c | 1 - .../amd/display/dc/clk_mgr/dcn31/dcn31_smu.c | 1 - .../display/dc/clk_mgr/dcn315/dcn315_smu.c | 2 +- .../dc/clk_mgr/dcn316/dcn316_clk_mgr.c | 19 ++++-- .../display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c | 50 ++++++++++++++ drivers/gpu/drm/amd/display/dc/core/dc.c | 5 +- .../drm/amd/display/dc/core/dc_hw_sequencer.c | 3 +- .../gpu/drm/amd/display/dc/core/dc_resource.c | 4 +- .../gpu/drm/amd/display/dc/core/dc_state.c | 10 +++ .../gpu/drm/amd/display/dc/core/dc_surface.c | 20 ++++++ drivers/gpu/drm/amd/display/dc/dc.h | 6 +- drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c | 2 + drivers/gpu/drm/amd/display/dc/dc_dmub_srv.h | 1 + drivers/gpu/drm/amd/display/dc/dc_dp_types.h | 5 ++ .../gpu/drm/amd/display/dc/dc_plane_priv.h | 1 + .../drm/amd/display/dc/dce/dce_clock_source.c | 8 +-- .../gpu/drm/amd/display/dc/dcn30/dcn30_vpg.h | 23 +------ .../amd/display/dc/dcn31/dcn31_panel_cntl.c | 9 ++- .../gpu/drm/amd/display/dc/dcn31/dcn31_vpg.h | 1 + .../drm/amd/display/dc/dml/dcn32/dcn32_fpu.c | 2 +- .../drm/amd/display/dc/dml/dcn35/dcn35_fpu.c | 4 +- .../amd/display/dc/dml2/display_mode_core.c | 1 + .../amd/display/dc/dml2/display_mode_core.h | 1 + .../dc/dml2/display_mode_lib_defines.h | 2 + .../display/dc/dml2/dml2_translation_helper.c | 45 ++++++++++++- .../gpu/drm/amd/display/dc/dml2/dml2_utils.c | 65 +++++++++++++++++++ .../gpu/drm/amd/display/dc/dml2/dml2_utils.h | 5 ++ .../drm/amd/display/dc/dml2/dml2_wrapper.c | 1 + .../amd/display/dc/hwss/dcn32/dcn32_hwseq.c | 2 +- .../drm/amd/display/dc/hwss/hw_sequencer.h | 3 +- .../gpu/drm/amd/display/dc/inc/core_types.h | 2 + drivers/gpu/drm/amd/display/dc/inc/hw/dwb.h | 30 +++++---- .../amd/display/dc/inc/hw/stream_encoder.h | 4 -- drivers/gpu/drm/amd/display/dc/inc/hw/vpg.h | 53 +++++++++++++++ drivers/gpu/drm/amd/display/dc/inc/resource.h | 7 -- .../dc/link/accessories/link_dp_trace.c | 1 - .../gpu/drm/amd/display/dc/link/link_dpms.c | 3 +- .../amd/display/dc/link/protocols/link_dpcd.c | 2 +- .../amd/display/dc/optc/dcn10/dcn10_optc.c | 15 ++++- .../amd/display/dc/optc/dcn10/dcn10_optc.h | 3 + .../amd/display/dc/optc/dcn20/dcn20_optc.c | 10 --- .../amd/display/dc/optc/dcn32/dcn32_optc.c | 14 ++-- .../dc/resource/dce80/dce80_resource.c | 1 - .../dc/resource/dcn10/dcn10_resource.c | 4 +- .../dc/resource/dcn201/dcn201_resource.c | 6 +- .../dc/resource/dcn21/dcn21_resource.c | 33 +--------- .../dc/resource/dcn32/dcn32_resource.c | 28 ++++---- .../gpu/drm/amd/display/dmub/inc/dmub_cmd.h | 1 + 53 files changed, 387 insertions(+), 157 deletions(-) create mode 100644 drivers/gpu/drm/amd/display/dc/inc/hw/vpg.h
Signature · 1 line
2.44.0
PATCH 1/28 drm/amd/display: Add option to configure mapping policy for edp0 on dp1
From: Lewis Huang <[email protected]>
[Why]
We want flexibility to choose how pwrseq instance is mapped to eDP panel
[How]
Add configuration option to choose the pwrseq mapping policy. When enabled, allow fixed mapping between DIG inst to pwrseq inst.
--- drivers/gpu/drm/amd/display/dc/dc.h | 1 + drivers/gpu/drm/amd/display/dc/dcn31/dcn31_panel_cntl.c | 9 ++++++++- 2 files changed, 9 insertions(+), 1 deletion(-)
drivers/gpu/drm/amd/display/dc/dc.h +1 -0
@@ -437,6 +437,7 @@ struct dc_config {bool usb4_bw_alloc_support;bool allow_0_dtb_clk;bool use_assr_psp_message; +bool support_edp0_on_dp1; };enum visual_confirm {
drivers/gpu/drm/amd/display/dc/dcn31/dcn31_panel_cntl.c +8 -1
@@ -173,5 +173,12 @@ void dcn31_panel_cntl_construct(break ; } - dcn31_panel_cntl->base.pwrseq_inst = pwrseq_inst; +if (dcn31_panel_cntl->base.ctx->dc->config.support_edp0_on_dp1) +//If supported, power sequencer mapping shall follow the DIG instance + dcn31_panel_cntl->base.pwrseq_inst = pwrseq_inst; +else +/* If not supported, pwrseq will be assigned in order, +* so first pwrseq will be assigned to first panel instance (legacy behavior) +*/ + dcn31_panel_cntl->base.pwrseq_inst = dcn31_panel_cntl->base.inst; }
Signature · 1 line
2.44.0
PATCH 2/28 drm/amd/display: Return max resolution supported by DWB
In reply to Hamza MahfoozFrom: Alex Hung <[email protected]>
mode_config's max width x height is 4096x2160 and is higher than DWB's max resolution 3840x2160 which is returned instead.
--- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_wb.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_wb.c +2 -4
@@ -76,10 +76,8 @@ static int amdgpu_dm_wb_encoder_atomic_check(struct drm_encoder *encoder,static int amdgpu_dm_wb_connector_get_modes (struct drm_connector *connector) { -struct drm_device *dev = connector->dev; - -return drm_add_modes_noedid (connector, dev->mode_config.max_width, - dev->mode_config.max_height); +/* Maximum resolution supported by DWB */ +return drm_add_modes_noedid (connector,3840 ,2160 ); } static int amdgpu_dm_wb_prepare_job(struct drm_writeback_connector *wb_connector,
Signature · 1 line
2.44.0
PATCH 3/28 drm/amd/display: always reset ODM mode in context when adding first plane
In reply to Hamza MahfoozFrom: Wenjing Liu <[email protected]>
[why]
In current implemenation ODM mode is only reset when the last plane is removed from dc state. For any dc validate we will always remove all current planes and add new planes. However when switching from no planes to 1 plane, ODM mode is not reset because no planes get removed. This has caused an issue where we kept ODM combine when it should have been remove when a plane is added. The change is to reset ODM mode when adding the first plane.
--- drivers/gpu/drm/amd/display/dc/core/dc_state.c | 9 +++++++++ 1 file changed, 9 insertions(+)
drivers/gpu/drm/amd/display/dc/core/dc_state.c +9 -0
@@ -458,6 +458,15 @@ bool dc_state_add_plane( goto out; } +if (stream_status->plane_count ==0 && dc->config.enable_windowed_mpo_odm) +/* ODM combine could prevent us from supporting more planes +* we will reset ODM slice count back to 1 when all planes have +* been removed to maximize the amount of planes supported when +* new planes are added. +*/ +resource_update_pipes_for_stream_with_slice_count ( + state, dc->current_state, dc->res_pool, stream,1 ); + otg_master_pipe =resource_get_otg_master_for_stream ( &state->res_ctx, stream);if (otg_master_pipe)
Signature · 1 line
2.44.0
PATCH 4/28 drm/amd/display: fix an incorrect ODM policy assigned for subvp
In reply to Hamza MahfoozFrom: Wenjing Liu <[email protected]>
[why]
When Subvp pipe's index is smaller than main pipe's index, the main pipe's ODM policy is not yet assigned. If we assign subvp pipe's ODM policy based on main pipe, we will assign uninitialized ODM policy.
[how]
Instead of copying main pipe's policy we copy the main pipe ODM policy logic. So it doesn't matter whether if main pipe's ODM policy is set, phantom pipe will always have the same policy because it running the same calcualtion to derive ODM policy.
--- .../dc/resource/dcn32/dcn32_resource.c | 28 ++++++++++--------- 1 file changed, 15 insertions(+), 13 deletions(-)
drivers/gpu/drm/amd/display/dc/resource/dcn32/dcn32_resource.c +15 -13
@@ -1824,6 +1824,7 @@ int dcn32_populate_dml_pipes_from_context(int num_subvp_main =0 ;int num_subvp_phantom =0 ;int num_subvp_none =0 ; +int odm_slice_count;dcn20_populate_dml_pipes_from_context (dc, context, pipes, fast_validate);
@@ -1852,7 +1853,7 @@ int dcn32_populate_dml_pipes_from_context( mall_type =dc_state_get_pipe_subvp_type (context, pipe);if (mall_type ==SUBVP_MAIN ) {if (resource_is_pipe_type (pipe,OTG_MASTER )) - subvp_main_pipe_index = pipe_cnt; + subvp_main_pipe_index = i; } pipe_cnt++; }
@@ -1878,22 +1879,23 @@ int dcn32_populate_dml_pipes_from_context( mall_type =dc_state_get_pipe_subvp_type (context, pipe);if (single_display_subvp && (mall_type ==SUBVP_PHANTOM )) {if (subvp_main_pipe_index <0 ) { + odm_slice_count =-1 ;ASSERT (0 ); }else { - pipes[pipe_cnt].pipe.dest.odm_combine_policy = - pipes[subvp_main_pipe_index].pipe.dest.odm_combine_policy; + odm_slice_count =resource_get_odm_slice_count (&res_ctx->pipe_ctx[subvp_main_pipe_index]); } }else { -switch (resource_get_odm_slice_count (pipe)) { -case 2 : - pipes[pipe_cnt].pipe.dest.odm_combine_policy = dm_odm_combine_policy_2to1; -break ; -case 4 : - pipes[pipe_cnt].pipe.dest.odm_combine_policy = dm_odm_combine_policy_4to1; -break ; -default : - pipes[pipe_cnt].pipe.dest.odm_combine_policy = dm_odm_combine_policy_dal; - } + odm_slice_count =resource_get_odm_slice_count (pipe); + } +switch (odm_slice_count) { +case 2 : + pipes[pipe_cnt].pipe.dest.odm_combine_policy = dm_odm_combine_policy_2to1; +break ; +case 4 : + pipes[pipe_cnt].pipe.dest.odm_combine_policy = dm_odm_combine_policy_4to1; +break ; +default : + pipes[pipe_cnt].pipe.dest.odm_combine_policy = dm_odm_combine_policy_dal; } }else { pipes[pipe_cnt].pipe.dest.odm_combine_policy = dm_odm_combine_policy_dal;
Signature · 1 line
2.44.0
PATCH 5/28 drm/amd/display: Add driver support for future FAMS versions
In reply to Hamza MahfoozFrom: Dillon Varone <[email protected]>
[WHY&HOW]
Changes to support future versions of FAMS.
--- .../gpu/drm/amd/display/dc/bios/bios_parser.c | 2 -- drivers/gpu/drm/amd/display/dc/core/dc.c | 5 ++++- .../drm/amd/display/dc/core/dc_hw_sequencer.c | 3 ++- .../gpu/drm/amd/display/dc/core/dc_state.c | 1 + .../gpu/drm/amd/display/dc/core/dc_surface.c | 20 +++++++++++++++++++ drivers/gpu/drm/amd/display/dc/dc.h | 3 +++ drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c | 2 ++ drivers/gpu/drm/amd/display/dc/dc_dmub_srv.h | 1 + .../gpu/drm/amd/display/dc/dc_plane_priv.h | 1 + .../amd/display/dc/hwss/dcn32/dcn32_hwseq.c | 2 +- .../drm/amd/display/dc/hwss/hw_sequencer.h | 3 ++- 11 files changed, 37 insertions(+), 6 deletions(-)
drivers/gpu/drm/amd/display/dc/bios/bios_parser.c +0 -2
@@ -44,8 +44,6 @@#include "bios_parser_common.h" -#include "dc.h" -#define THREE_PERCENT_OF_10000 300#define LAST_RECORD_TYPE 0xff
drivers/gpu/drm/amd/display/dc/core/dc.c +4 -1
@@ -36,6 +36,7 @@#include "resource.h" #include "dc_state.h" #include "dc_state_priv.h" +#include "dc_plane_priv.h" #include "gpio_service_interface.h" #include "clk_mgr.h"
@@ -3562,6 +3563,7 @@ static void commit_planes_for_stream_fast(struct dc *dc,int i, j;struct pipe_ctx *top_pipe_to_program =NULL ;struct dc_stream_status *stream_status =NULL ; +dc_exit_ips_for_hw_access (dc);dc_z10_restore (dc);
@@ -3619,7 +3621,8 @@ static void commit_planes_for_stream_fast(struct dc *dc, context->block_sequence, &(context->block_sequence_steps), top_pipe_to_program, - stream_status); + stream_status, + context);hwss_execute_sequence (dc, context->block_sequence, context->block_sequence_steps);
drivers/gpu/drm/amd/display/dc/core/dc_hw_sequencer.c +2 -1
@@ -560,7 +560,8 @@ void hwss_build_fast_sequence(struct dc *dc,struct block_sequence block_sequence[], unsigned int *num_steps, struct pipe_ctx *pipe_ctx, - struct dc_stream_status *stream_status) + struct dc_stream_status *stream_status, + struct dc_state *context) { struct dc_plane_state *plane = pipe_ctx->plane_state;struct dc_stream_state *stream = pipe_ctx->stream;
drivers/gpu/drm/amd/display/dc/core/dc_state.c +1 -0
@@ -915,3 +915,4 @@ struct dc_stream_state *dc_state_get_stream_from_id(const struct dc_state *statereturn stream; } +
drivers/gpu/drm/amd/display/dc/core/dc_surface.c +20 -0
@@ -60,6 +60,26 @@ void dc_plane_destruct(struct dc_plane_state *plane_state)// no more pointers to free within dc_plane_state } + +/* dc_state is passed in separately since it may differ from the current dc state accessible from plane_state e.g. +* if the driver is doing an update from an old context to a new one and the caller wants the pipe mask for the new +* context rather than the existing one +*/ +uint8_t dc_plane_get_pipe_mask (struct dc_state *dc_state,const struct dc_plane_state *plane_state) +{ +uint8_t pipe_mask =0 ; +int i; + +for (i =0 ; i < plane_state->ctx->dc->res_pool->pipe_count; i++) { +struct pipe_ctx *pipe_ctx = &dc_state->res_ctx.pipe_ctx[i]; + +if (pipe_ctx->plane_state == plane_state && pipe_ctx->plane_res.hubp) + pipe_mask |=1 << pipe_ctx->plane_res.hubp->inst; + } + +return pipe_mask; +} +/******************************************************************************* * Public functions ******************************************************************************/
drivers/gpu/drm/amd/display/dc/dc.h +3 -0
@@ -44,6 +44,8 @@#include "dml2/dml2_wrapper.h" +#include "dmub/inc/dmub_cmd.h" +struct abm_save_restore ;/* forward declaration */
@@ -219,6 +221,7 @@ struct dc_dmub_caps {bool mclk_sw;bool subvp_psr;bool gecc_enable; +uint8_t fams_ver; };struct dc_caps {
drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c +2 -0
@@ -35,6 +35,7 @@#include "resource.h" #include "clk_mgr.h" #include "dc_state_priv.h" +#include "dc_plane_priv.h" #define CTX dc_dmub_srv->ctx#define DC_LOGGER CTX->logger
@@ -1593,3 +1594,4 @@ bool dc_wake_and_execute_gpint(const struct dc_context *ctx, enum dmub_gpint_comreturn result; } +
drivers/gpu/drm/amd/display/dc/dc_dmub_srv.h +1 -0
@@ -35,6 +35,7 @@ struct pipe_ctx;struct dc_crtc_timing_adjust ;struct dc_crtc_timing ;struct dc_state ; +struct dc_surface_update ;struct dc_reg_helper_state {bool gather_in_progress;
drivers/gpu/drm/amd/display/dc/dc_plane_priv.h +1 -0
@@ -30,5 +30,6 @@void dc_plane_construct (struct dc_context *ctx,struct dc_plane_state *plane_state);void dc_plane_destruct (struct dc_plane_state *plane_state); +uint8_t dc_plane_get_pipe_mask (struct dc_state *dc_state,const struct dc_plane_state *plane_state);#endif /* _DC_PLANE_PRIV_H_ */
drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.c +1 -1
@@ -956,7 +956,7 @@ void dcn32_init_hw(struct dc *dc) dc->caps.dmub_caps.mclk_sw = dc->ctx->dmub_srv->dmub->feature_caps.fw_assisted_mclk_switch_ver;if (dc->ctx->dmub_srv->dmub->fw_version < -DMUB_FW_VERSION (7 ,0 ,35 )) { +DMUB_FW_VERSION (7 ,0 ,35 )) { dc->debug.force_disable_subvp = true; dc->debug.disable_fpo_optimizations = true; }
drivers/gpu/drm/amd/display/dc/hwss/hw_sequencer.h +2 -1
@@ -482,7 +482,8 @@ void hwss_build_fast_sequence(struct dc *dc,struct block_sequence block_sequence[], unsigned int *num_steps, struct pipe_ctx *pipe_ctx, - struct dc_stream_status *stream_status); + struct dc_stream_status *stream_status, + struct dc_state *context);void hwss_send_dmcub_cmd (union block_sequence_params *params);
Signature · 1 line
2.44.0
PATCH 6/28 drm/amd/display: Do not recursively call manual trigger programming
In reply to Hamza MahfoozFrom: Dillon Varone <[email protected]>
[WHY&HOW]
We should not be recursively calling the manual trigger programming function when FAMS is not in use.
--- drivers/gpu/drm/amd/display/dc/optc/dcn32/dcn32_optc.c | 3 --- 1 file changed, 3 deletions(-)
drivers/gpu/drm/amd/display/dc/optc/dcn32/dcn32_optc.c +0 -3
@@ -267,9 +267,6 @@ static void optc32_setup_manual_trigger(struct timing_generator *optc)OTG_V_TOTAL_MAX_SEL ,1 ,OTG_FORCE_LOCK_ON_EVENT ,0 , OTG_SET_V_TOTAL_MIN_MASK, (1 << 1)); /* TRIGA */ - -// Setup manual flow control for EOF via TRIG_A - optc->funcs->setup_manual_trigger (optc); } }
Signature · 1 line
2.44.0
PATCH 7/28 drm/amd/display: fix disable otg wa logic in DCN316
In reply to Hamza MahfoozFrom: Fudongwang <[email protected]>
[Why]
Wrong logic cause screen corruption.
[How]
Port logic from DCN35/314.
--- .../dc/clk_mgr/dcn316/dcn316_clk_mgr.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-)
drivers/gpu/drm/amd/display/dc/clk_mgr/dcn316/dcn316_clk_mgr.c +12 -7
@@ -99,20 +99,25 @@ static int dcn316_get_active_display_cnt_wa(return display_count; } -static void dcn316_disable_otg_wa (struct clk_mgr *clk_mgr_base,struct dc_state *context,bool disable) +static void dcn316_disable_otg_wa (struct clk_mgr *clk_mgr_base,struct dc_state *context, +bool safe_to_lower,bool disable) {struct dc *dc = clk_mgr_base->ctx->dc;int i;for (i =0 ; i < dc->res_pool->pipe_count; ++i) { -struct pipe_ctx *pipe = &dc->current_state->res_ctx.pipe_ctx[i]; +struct pipe_ctx *pipe = safe_to_lower + ? &context->res_ctx.pipe_ctx[i] + : &dc->current_state->res_ctx.pipe_ctx[i];if (pipe->top_pipe || pipe->prev_odm_pipe)continue ; -if (pipe->stream && (pipe->stream->dpms_off || pipe->plane_state ==NULL || -dc_is_virtual_signal (pipe->stream->signal))) { +if (pipe->stream && (pipe->stream->dpms_off ||dc_is_virtual_signal (pipe->stream->signal) || + !pipe->stream->link_enc)) {if (disable) { - pipe->stream_res.tg->funcs->immediate_disable_crtc (pipe->stream_res.tg); +if (pipe->stream_res.tg && pipe->stream_res.tg->funcs->immediate_disable_crtc) + pipe->stream_res.tg->funcs->immediate_disable_crtc (pipe->stream_res.tg); +reset_sync_context_for_pipe (dc, context, i); }else pipe->stream_res.tg->funcs->enable_crtc (pipe->stream_res.tg);
@@ -207,11 +212,11 @@ static void dcn316_update_clocks(struct clk_mgr *clk_mgr_base, }if (should_set_clock (safe_to_lower, new_clocks->dispclk_khz, clk_mgr_base->clks.dispclk_khz)) { -dcn316_disable_otg_wa (clk_mgr_base, context, true); +dcn316_disable_otg_wa (clk_mgr_base, context, safe_to_lower, true); clk_mgr_base->clks.dispclk_khz = new_clocks->dispclk_khz;dcn316_smu_set_dispclk (clk_mgr, clk_mgr_base->clks.dispclk_khz); -dcn316_disable_otg_wa (clk_mgr_base, context, false); +dcn316_disable_otg_wa (clk_mgr_base, context, safe_to_lower, false); update_dispclk = true; }
Signature · 1 line
2.44.0
PATCH 8/28 drm/amd/display: expand the non standard link rate for testing
In reply to Hamza MahfoozFrom: Allen Pan <[email protected]>
[Why]
6.75 Gbps link rate training for DP_TEST_LINK_RATE_RATE_8
--- drivers/gpu/drm/amd/display/dc/dc_dp_types.h | 5 +++++ 1 file changed, 5 insertions(+)
drivers/gpu/drm/amd/display/dc/dc_dp_types.h +5 -0
@@ -137,8 +137,13 @@ enum dp_link_encoding {enum dp_test_link_rate {DP_TEST_LINK_RATE_RBR =0x06 , +DP_TEST_LINK_RATE_RATE_2 =0x08 ,// Rate_2 - 2.16 Gbps/Lane +DP_TEST_LINK_RATE_RATE_3 =0x09 ,// Rate_3 - 2.43 Gbps/Lane DP_TEST_LINK_RATE_HBR =0x0A , +DP_TEST_LINK_RATE_RBR2 =0x0C ,// Rate_5 (RBR2) - 3.24 Gbps/Lane +DP_TEST_LINK_RATE_RATE_6 =0x10 ,// Rate_6 - 4.32 Gbps/Lane DP_TEST_LINK_RATE_HBR2 =0x14 , +DP_TEST_LINK_RATE_RATE_8 =0x19 ,// Rate_8 - 6.75 Gbps/Lane DP_TEST_LINK_RATE_HBR3 =0x1E ,DP_TEST_LINK_RATE_UHBR10 =0x01 ,DP_TEST_LINK_RATE_UHBR20 =0x02 ,
Signature · 1 line
2.44.0
PATCH 9/28 drm/amd/display: refactor vpg.h
In reply to Hamza MahfoozFrom: Parandhaman K <[email protected]>
why and how:
as part of cleanup, need to refactor vpg. It was improperly referenced as a dcn specfic part of link. the dcn agnostic code needed was ripped out and put into vpg.h, now in dc/inc/hw.
--- .../gpu/drm/amd/display/dc/dcn30/dcn30_vpg.h | 23 +------- .../gpu/drm/amd/display/dc/dcn31/dcn31_vpg.h | 1 + drivers/gpu/drm/amd/display/dc/inc/hw/vpg.h | 53 +++++++++++++++++++ .../gpu/drm/amd/display/dc/link/link_dpms.c | 3 +- 4 files changed, 57 insertions(+), 23 deletions(-) create mode 100644 drivers/gpu/drm/amd/display/dc/inc/hw/vpg.h
drivers/gpu/drm/amd/display/dc/dcn30/dcn30_vpg.h +1 -22
@@ -26,6 +26,7 @@#ifndef __DAL_DCN30_VPG_H__#define __DAL_DCN30_VPG_H__ +#include "vpg.h" #define DCN30_VPG_FROM_VPG (vpg)\ container_of(vpg, struct dcn30_vpg, base)
@@ -132,28 +133,6 @@ struct dcn30_vpg_mask {VPG_DCN3_REG_FIELD_LIST (uint32_t); }; -struct vpg ; - -struct vpg_funcs { -void (*update_generic_info_packet)( -struct vpg *vpg, -uint32_t packet_index, -const struct dc_info_packet *info_packet, -bool immediate_update); - -void (*vpg_poweron)( -struct vpg *vpg); - -void (*vpg_powerdown)( -struct vpg *vpg); -}; - -struct vpg { -const struct vpg_funcs *funcs; -struct dc_context *ctx; -int inst; -}; -struct dcn30_vpg {struct vpg base;const struct dcn30_vpg_registers *regs;
drivers/gpu/drm/amd/display/dc/dcn31/dcn31_vpg.h +1 -0
@@ -26,6 +26,7 @@#ifndef __DAL_DCN31_VPG_H__#define __DAL_DCN31_VPG_H__ +#include "vpg.h" #define DCN31_VPG_FROM_VPG (vpg)\ container_of(vpg, struct dcn31_vpg, base)
drivers/gpu/drm/amd/display/dc/inc/hw/vpg.h new file +53 -0
54 lines not on this page · raw message
drivers/gpu/drm/amd/display/dc/link/link_dpms.c +2 -1
@@ -55,6 +55,8 @@#include "dccg.h" #include "clk_mgr.h" #include "atomfirmware.h" +#include "vpg.h" +#define DC_LOGGER \ dc_logger#define DC_LOGGER_INIT (logger) \
@@ -67,7 +69,6 @@#define RETIMER_REDRIVER_INFO (...) \ DC_LOG_RETIMER_REDRIVER( \ __VA_ARGS__) -#include "dc/dcn30/dcn30_vpg.h" #define MAX_MTP_SLOT_COUNT 64#define LINK_TRAINING_ATTEMPTS 4
Signature · 1 line
2.44.0
PATCH 10/28 drm/amd/display: add dwb support to dml2
In reply to Hamza MahfoozFrom: Charlene Liu <[email protected]>
[why]
dwb was not previosly a priority.
now we need to enable dwb in dml2.
Limitation:
HW DML assumes only one DWB
one set of watermark for all 4 watermark sets
one stream has one DWB only.
WB scaling dml input has one set of scaling tap.
(no chroma so far)
needs to follow up
--- .../amd/display/dc/dml2/display_mode_core.c | 1 + .../amd/display/dc/dml2/display_mode_core.h | 1 + .../dc/dml2/display_mode_lib_defines.h | 2 + .../display/dc/dml2/dml2_translation_helper.c | 45 ++++++++++++- .../gpu/drm/amd/display/dc/dml2/dml2_utils.c | 65 +++++++++++++++++++ .../gpu/drm/amd/display/dc/dml2/dml2_utils.h | 5 ++ .../drm/amd/display/dc/dml2/dml2_wrapper.c | 1 + 7 files changed, 119 insertions(+), 1 deletion(-)
drivers/gpu/drm/amd/display/dc/dml2/display_mode_core.c +1 -0
@@ -10214,6 +10214,7 @@ dml_get_var_func(fraction_of_urgent_bandwidth_imm_flip, dml_float_t, mode_lib->mdml_get_var_func (urgent_latency, dml_float_t, mode_lib->mp.UrgentLatency);dml_get_var_func (clk_dcf_deepsleep, dml_float_t, mode_lib->mp.DCFCLKDeepSleep);dml_get_var_func (wm_writeback_dram_clock_change, dml_float_t, mode_lib->mp.Watermark.WritebackDRAMClockChangeWatermark); +dml_get_var_func (wm_writeback_urgent, dml_float_t, mode_lib->mp.Watermark.WritebackUrgentWatermark);dml_get_var_func (stutter_efficiency, dml_float_t, mode_lib->mp.StutterEfficiency);dml_get_var_func (stutter_efficiency_no_vblank, dml_float_t, mode_lib->mp.StutterEfficiencyNotIncludingVBlank);dml_get_var_func (stutter_efficiency_z8, dml_float_t, mode_lib->mp.Z8StutterEfficiency);
drivers/gpu/drm/amd/display/dc/dml2/display_mode_core.h +1 -0
@@ -94,6 +94,7 @@ dml_get_var_decl(wm_usr_retraining, dml_float_t);dml_get_var_decl (urgent_latency, dml_float_t);dml_get_var_decl (wm_writeback_dram_clock_change, dml_float_t); +dml_get_var_decl (wm_writeback_urgent, dml_float_t);dml_get_var_decl (stutter_efficiency_no_vblank, dml_float_t);dml_get_var_decl (stutter_efficiency, dml_float_t);dml_get_var_decl (stutter_efficiency_z8, dml_float_t);
drivers/gpu/drm/amd/display/dc/dml2/display_mode_lib_defines.h +2 -0
@@ -41,6 +41,7 @@#define DCN_DML__VM_PRESENT__1 1#define DCN_DML__HOST_VM_PRESENT 1#define DCN_DML__HOST_VM_PRESENT__1 1 +#define DCN_DML__DWB 1#include "dml_depedencies.h"
@@ -59,6 +60,7 @@#define __DML_NUM_PLANES__ DCN_DML__NUM_PLANE#define __DML_NUM_CURSORS__ DCN_DML__NUM_CURSOR#define __DML_DPP_INVALID__ 0 +#define __DML_NUM_DMB__ DCN_DML__DWB#define __DML_PIPE_NO_PLANE__ 99#define __DML_MAX_STATE_ARRAY_SIZE__ DCN_DML__NUM_PWR_STATE
drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c +44 -1
57 lines not on this page · raw message
drivers/gpu/drm/amd/display/dc/dml2/dml2_utils.c +65 -0
71 lines not on this page · raw message
drivers/gpu/drm/amd/display/dc/dml2/dml2_utils.h +5 -0
@@ -40,9 +40,14 @@ void dml2_util_copy_dml_output(struct dml_output_cfg_st *dml_output_array, unsigunsigned int dml2_util_get_maximum_odm_combine_for_output (bool force_odm_4to1,enum dml_output_encoder_class encoder,bool dsc_enabled);void dml2_copy_clocks_to_dc_state (struct dml2_dcn_clocks *out_clks,struct dc_state *context);void dml2_extract_watermark_set (struct dcn_watermarks *watermark,struct display_mode_lib_st *dml_core_ctx); +void dml2_extract_writeback_wm (struct dc_state *context,struct display_mode_lib_st *dml_core_ctx);int dml2_helper_find_dml_pipe_idx_by_stream_id (struct dml2_context *ctx,unsigned int stream_id);bool is_dtbclk_required (const struct dc *dc,struct dc_state *context);bool dml2_is_stereo_timing (const struct dc_stream_state *stream); +unsigned int dml2_calc_max_scaled_time ( +unsigned int time_per_pixel, +enum mmhubbub_wbif_mode mode, +unsigned int urgent_watermark);/* * dml2_dc_construct_pipes - This function will determine if we need additional pipes based
drivers/gpu/drm/amd/display/dc/dml2/dml2_wrapper.c +1 -0
@@ -640,6 +640,7 @@ static bool dml2_validate_and_build_resource(const struct dc *in_dc, struct dc_sdml2_extract_watermark_set (&context->bw_ctx.bw.dcn.watermarks.b, &dml2->v20.dml_core_ctx);memcpy (&context->bw_ctx.bw.dcn.watermarks.c, &dml2->v20.g6_temp_read_watermark_set,sizeof (context->bw_ctx.bw.dcn.watermarks.c));dml2_extract_watermark_set (&context->bw_ctx.bw.dcn.watermarks.d, &dml2->v20.dml_core_ctx); +dml2_extract_writeback_wm (context, &dml2->v20.dml_core_ctx);//copy for deciding zstate use context->bw_ctx.dml.vba.StutterPeriod = context->bw_ctx.dml2->v20.dml_core_ctx.mp.StutterPeriod;
Signature · 1 line
2.44.0
PATCH 11/28 drm/amd/display: Program VSC SDP colorimetry for all DP sinks >= 1.4
In reply to Hamza MahfoozFrom: Harry Wentland <[email protected]>
In order for display colorimetry to work correctly on DP displays we need to send the VSC SDP packet. We should only do so for panels with DPCD revision greater or equal to 1.4 as older receivers might have problems with it.
--- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +5 -2
@@ -6326,7 +6326,9 @@ create_stream_for_sink(struct drm_connector *connector,if (stream->signal ==SIGNAL_TYPE_HDMI_TYPE_A )mod_build_hf_vsif_infopacket (stream, &stream->vsp_infopacket); -if (stream->link->psr_settings.psr_feature_enabled || stream->link->replay_settings.replay_feature_enabled) { +if (stream->signal ==SIGNAL_TYPE_DISPLAY_PORT || + stream->signal ==SIGNAL_TYPE_DISPLAY_PORT_MST || + stream->signal ==SIGNAL_TYPE_EDP ) {// // should decide stream support vsc sdp colorimetry capability // before building vsc info packet
@@ -6336,7 +6338,8 @@ create_stream_for_sink(struct drm_connector *connector, stream->use_vsc_sdp_for_colorimetry = aconnector->dc_sink->is_vsc_sdp_colorimetry_supported; }else { -if (stream->link->dpcd_caps.dprx_feature.bits.VSC_SDP_COLORIMETRY_SUPPORTED) +if (stream->link->dpcd_caps.dpcd_rev.raw >=0x14 && + stream->link->dpcd_caps.dprx_feature.bits.VSC_SDP_COLORIMETRY_SUPPORTED) stream->use_vsc_sdp_for_colorimetry = true; }if (stream->out_transfer_func.tf ==TRANSFER_FUNCTION_GAMMA22 )
Signature · 1 line
2.44.0
PATCH 12/28 drm/amd/display: Set VSC SDP Colorimetry same way for MST and SST
In reply to Hamza MahfoozFrom: Harry Wentland <[email protected]>
The previous check for the is_vsc_sdp_colorimetry_supported flag for MST sink signals did nothing. Simplify the code and use the same check for MST and SST.
--- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +3 -9
@@ -6333,15 +6333,9 @@ create_stream_for_sink(struct drm_connector *connector,// should decide stream support vsc sdp colorimetry capability // before building vsc info packet // - stream->use_vsc_sdp_for_colorimetry = false; -if (aconnector->dc_sink->sink_signal ==SIGNAL_TYPE_DISPLAY_PORT_MST ) { - stream->use_vsc_sdp_for_colorimetry = - aconnector->dc_sink->is_vsc_sdp_colorimetry_supported; - }else { -if (stream->link->dpcd_caps.dpcd_rev.raw >=0x14 && - stream->link->dpcd_caps.dprx_feature.bits.VSC_SDP_COLORIMETRY_SUPPORTED) - stream->use_vsc_sdp_for_colorimetry = true; - } + stream->use_vsc_sdp_for_colorimetry = stream->link->dpcd_caps.dpcd_rev.raw >=0x14 && + stream->link->dpcd_caps.dprx_feature.bits.VSC_SDP_COLORIMETRY_SUPPORTED; +if (stream->out_transfer_func.tf ==TRANSFER_FUNCTION_GAMMA22 ) tf =TRANSFER_FUNC_GAMMA_22 ;mod_build_vsc_infopacket (stream, &stream->vsc_infopacket, stream->output_color_space, tf);
Signature · 1 line
2.44.0
PATCH 13/28 drm/amd/display: Adjust dprefclk by down spread percentage.
In reply to Hamza MahfoozFrom: Zhongwei <[email protected]>
[Why]
OLED panels show no display for large vtotal timings.
[How]
Check if ss is enabled and read from lut for spread spectrum percentage. Adjust dprefclk as required. DP_DTO adjustment is for edp only.
--- .../display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c | 50 +++++++++++++++++++ .../drm/amd/display/dc/dce/dce_clock_source.c | 8 +-- 2 files changed, 54 insertions(+), 4 deletions(-)
drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c +50 -0
@@ -73,6 +73,12 @@#define CLK1_CLK2_BYPASS_CNTL__CLK2_BYPASS_SEL_MASK 0x00000007L#define CLK1_CLK2_BYPASS_CNTL__CLK2_BYPASS_DIV_MASK 0x000F0000L +#define regCLK5_0_CLK5_spll_field_8 0x464b +#define regCLK5_0_CLK5_spll_field_8_BASE_IDX 0 + +#define CLK5_0_CLK5_spll_field_8__spll_ssc_en__SHIFT 0xd +#define CLK5_0_CLK5_spll_field_8__spll_ssc_en_MASK 0x00002000L +#define SMU_VER_THRESHOLD 0x5D4A00 //93.74.0#define REG (reg_name) \
@@ -412,6 +418,17 @@ static void dcn35_dump_clk_registers(struct clk_state_registers_and_bypass *regs { } +static bool dcn35_is_spll_ssc_enabled (struct clk_mgr *clk_mgr_base) +{ +struct clk_mgr_internal *clk_mgr =TO_CLK_MGR_INTERNAL (clk_mgr_base); +struct dc_context *ctx = clk_mgr->base.ctx; +uint32_t ssc_enable; + +REG_GET (CLK5_0_CLK5_spll_field_8, spll_ssc_en, &ssc_enable); + +return ssc_enable ==1 ; +} +static void init_clk_states (struct clk_mgr *clk_mgr) {struct clk_mgr_internal *clk_mgr_int =TO_CLK_MGR_INTERNAL (clk_mgr);
@@ -429,7 +446,16 @@ static void init_clk_states(struct clk_mgr *clk_mgr)void dcn35_init_clocks (struct clk_mgr *clk_mgr) { +struct clk_mgr_internal *clk_mgr_int =TO_CLK_MGR_INTERNAL (clk_mgr);init_clk_states (clk_mgr); + +// to adjust dp_dto reference clock if ssc is enable otherwise to apply dprefclk +if (dcn35_is_spll_ssc_enabled (clk_mgr)) + clk_mgr->dp_dto_source_clock_in_khz = +dce_adjust_dp_ref_freq_for_ss (clk_mgr_int, clk_mgr->dprefclk_khz); +else + clk_mgr->dp_dto_source_clock_in_khz = clk_mgr->dprefclk_khz; + }static struct clk_bw_params dcn35_bw_params = { .vram_type = Ddr4MemType,
@@ -518,6 +544,28 @@ static DpmClocks_t_dcn35 dummy_clocks;static struct dcn35_watermarks dummy_wms = {0 }; +static struct dcn35_ss_info_table ss_info_table = { + .ss_divider =1000 , + .ss_percentage = {0 ,0 ,375 ,375 ,375 } +}; + +static void dcn35_read_ss_info_from_lut (struct clk_mgr_internal *clk_mgr) +{ +struct dc_context *ctx = clk_mgr->base.ctx; +uint32_t clock_source; + +REG_GET (CLK1_CLK2_BYPASS_CNTL ,CLK2_BYPASS_SEL , &clock_source); +// If it's DFS mode, clock_source is 0. +if (dcn35_is_spll_ssc_enabled (&clk_mgr->base) && (clock_source <ARRAY_SIZE (ss_info_table.ss_percentage))) { + clk_mgr->dprefclk_ss_percentage = ss_info_table.ss_percentage[clock_source]; + +if (clk_mgr->dprefclk_ss_percentage !=0 ) { + clk_mgr->ss_on_dprefclk = true; + clk_mgr->dprefclk_ss_divider = ss_info_table.ss_divider; + } + } +} +static void dcn35_build_watermark_ranges (struct clk_bw_params *bw_params,struct dcn35_watermarks *table) {int i, num_valid_sets;
@@ -1024,6 +1072,8 @@ void dcn35_clk_mgr_construct(dce_clock_read_ss_info (&clk_mgr->base);/*when clk src is from FCH, it could have ss, same clock src as DPREF clk*/ +dcn35_read_ss_info_from_lut (&clk_mgr->base); + clk_mgr->base.base.bw_params = &dcn35_bw_params;if (clk_mgr->base.base.ctx->dc->debug.pstate_enabled) {
drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c +4 -4
@@ -976,7 +976,10 @@ static bool dcn31_program_pix_clk(struct bp_pixel_clock_parameters bp_pc_params = {0 };enum transmitter_color_depth bp_pc_colour_depth =TRANSMITTER_COLOR_DEPTH_24 ; -if (clock_source->ctx->dc->clk_mgr->dp_dto_source_clock_in_khz !=0 ) +// Apply ssed(spread spectrum) dpref clock for edp only. +if (clock_source->ctx->dc->clk_mgr->dp_dto_source_clock_in_khz !=0 + && pix_clk_params->signal_type ==SIGNAL_TYPE_EDP + && encoding == DP_8b_10b_ENCODING) dp_dto_ref_khz = clock_source->ctx->dc->clk_mgr->dp_dto_source_clock_in_khz;// For these signal types Driver to program DP_DTO without calling VBIOS Command table if (dc_is_dp_signal (pix_clk_params->signal_type) ||dc_is_virtual_signal (pix_clk_params->signal_type)) {
@@ -1093,9 +1096,6 @@ static bool get_pixel_clk_frequency_100hz(unsigned int modulo_hz =0 ;unsigned int dp_dto_ref_khz = clock_source->ctx->dc->clk_mgr->dprefclk_khz; -if (clock_source->ctx->dc->clk_mgr->dp_dto_source_clock_in_khz !=0 ) - dp_dto_ref_khz = clock_source->ctx->dc->clk_mgr->dp_dto_source_clock_in_khz; -if (clock_source->id ==CLOCK_SOURCE_ID_DP_DTO ) { clock_hz =REG_READ (PHASE [inst]);
Signature · 1 line
2.44.0
PATCH 14/28 drm/amd/display: Rebuild test pattern params for DP_TEST_PATTERN_VIDEO_MODE
In reply to Hamza MahfoozFrom: George Shen <[email protected]>
[Why]
For video mode test pattern (i.e. test pattern disable), the call to rebuild test pattern params for the pipe is skipped. This causes dynamic disablement of test pattern to not work, as the test_pattern_params of the pipe will not be updated and retain the values of the previously enabled test pattern.
[How]
Rebuild test pattern params even when test pattern is video mode, allowing the pipe to have updated test_pattern_params values.
--- drivers/gpu/drm/amd/display/dc/core/dc_resource.c | 4 ++-- drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-)
drivers/gpu/drm/amd/display/dc/core/dc_resource.c +2 -2
@@ -2329,8 +2329,8 @@ static bool update_pipe_params_after_odm_slice_count_change(if (pool->funcs->build_pipe_pix_clk_params) pool->funcs->build_pipe_pix_clk_params (otg_master); -if (otg_master->stream->test_pattern.type !=DP_TEST_PATTERN_VIDEO_MODE ) -resource_build_test_pattern_params (&context->res_ctx, otg_master); +resource_build_test_pattern_params (&context->res_ctx, otg_master); +return result; }
drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c +1 -1
@@ -2120,7 +2120,7 @@ static bool dcn32_apply_merge_split_flags_helper(struct pipe_ctx *otg_master =resource_get_otg_master_for_stream (&context->res_ctx, context->streams[i]); -if (otg_master && otg_master->stream->test_pattern.type !=DP_TEST_PATTERN_VIDEO_MODE ) +if (otg_master)resource_build_test_pattern_params (&context->res_ctx, otg_master); } }
Signature · 1 line
2.44.0
PATCH 15/28 Revert "drm/amd/display: Enabling urgent latency adjustment for DCN35"
In reply to Hamza MahfoozFrom: Qili Lu <[email protected]>
This reverts commit 5145de86407c2d28cfed007b5014c0d0b40d5913.
It causes a dead loop in dml_prefetch_check.
--- drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c +2 -2
@@ -195,9 +195,9 @@ struct _vcs_dpi_soc_bounding_box_st dcn3_5_soc = { .dcn_downspread_percent = 0.5, .gpuvm_min_page_size_bytes = 4096, .hostvm_min_page_size_bytes = 4096, - .do_urgent_latency_adjustment = 1, + .do_urgent_latency_adjustment = 0, .urgent_latency_adjustment_fabric_clock_component_us = 0, - .urgent_latency_adjustment_fabric_clock_reference_mhz = 3000, + .urgent_latency_adjustment_fabric_clock_reference_mhz = 0, };void dcn35_build_wm_range_table_fpu (struct clk_mgr *clk_mgr)
Signature · 1 line
2.44.0
PATCH 16/28 drm/amd/display: [FW Promotion] Release 0.0.212.0
In reply to Hamza MahfoozFrom: Anthony Koo <[email protected]>
- Add boot option to change the ONO powerup flow, impacting the order of power domains to power up or down first
--- drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h | 1 + 1 file changed, 1 insertion(+)
drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h +1 -0
@@ -662,6 +662,7 @@ union dmub_fw_boot_options { uint32_t disable_timeout_recovery : 1; /* 1 if timeout recovery should be disabled */ uint32_t ips_pg_disable: 1; /* 1 to disable ONO domains power gating*/ uint32_t ips_disable: 3; /* options to disable ips support*/ + uint32_t ips_sequential_ono: 1; /**< 1 to enable sequential ONO IPS sequence */ uint32_t reserved : 9; /**< reserved */ } bits;/**< boot bits */ uint32_t all;/**< 32-bit access to bits */
Signature · 1 line
2.44.0
PATCH 17/28 drm/amd/display: Add V_TOTAL_REGS to dcn10
In reply to Hamza MahfoozFrom: Rodrigo Siqueira <[email protected]>
DCN10 OPTC is used by other DCNs, and in some cases it might be useful to have V_TOTAL_REGS available. This commit add V_TOTAL_REGS as part of the TG field.
--- drivers/gpu/drm/amd/display/dc/optc/dcn10/dcn10_optc.h | 3 +++ 1 file changed, 3 insertions(+)
drivers/gpu/drm/amd/display/dc/optc/dcn10/dcn10_optc.h +3 -0
@@ -517,12 +517,15 @@ struct dcn_optc_registers {type MANUAL_FLOW_CONTROL ;\type MANUAL_FLOW_CONTROL_SEL ; +#define V_TOTAL_REGS (type) +#define TG_REG_FIELD_LIST (type) \ TG_REG_FIELD_LIST_DCN1_0(type)\ type OTG_V_SYNC_MODE;\ type OTG_DRR_TRIGGER_WINDOW_START_X;\ type OTG_DRR_TRIGGER_WINDOW_END_X;\ type OTG_DRR_V_TOTAL_CHANGE_LIMIT;\ + V_TOTAL_REGS(type)\ type OTG_OUT_MUX;\ type OTG_M_CONST_DTO_PHASE;\ type OTG_M_CONST_DTO_MODULO;\
Signature · 1 line
2.44.0
PATCH 18/28 drm/amd/display: Add comments to improve the code readability
In reply to Hamza MahfoozFrom: Rodrigo Siqueira <[email protected]>
This commit just introduce some basic comments that helps to understand the overall behavior of some structs.
--- drivers/gpu/drm/amd/display/dc/inc/core_types.h | 2 ++ drivers/gpu/drm/amd/display/dc/resource/dce80/dce80_resource.c | 1 - .../gpu/drm/amd/display/dc/resource/dcn201/dcn201_resource.c | 1 + 3 files changed, 3 insertions(+), 1 deletion(-)
drivers/gpu/drm/amd/display/dc/inc/core_types.h +2 -0
@@ -339,7 +339,9 @@ struct stream_resource { };struct plane_resource { +/* scl_data is scratch space required to program a plane */ struct scaler_data scl_data; +/* Below pointers to hw objects are required to enable the plane */ struct hubp *hubp;struct mem_input *mi;struct input_pixel_processor *ipp;
drivers/gpu/drm/amd/display/dc/resource/dce80/dce80_resource.c +0 -1
@@ -56,7 +56,6 @@#include "dce/dce_aux.h" #include "dce/dce_abm.h" #include "dce/dce_i2c.h" -/* TODO remove this include */ #ifndef mmMC_HUB_RDREQ_DMIF_LIMIT#include "gmc/gmc_7_1_d.h"
drivers/gpu/drm/amd/display/dc/resource/dcn201/dcn201_resource.c +1 -0
@@ -182,6 +182,7 @@ static struct _vcs_dpi_soc_bounding_box_st dcn201_soc = { .socclk_mhz = 1254.0, .dram_speed_mts = 14000.0, }, +/* state4 is not an actual state, just defines unsupported for dml*/ { .state = 4, .dscclk_mhz = 400.0,
Signature · 1 line
2.44.0
PATCH 19/28 drm/amd/display: Adjust some includes used by display
In reply to Hamza MahfoozFrom: Rodrigo Siqueira <[email protected]>
Some of the includes used in the DC can be removed and others need to be update. This commit adjusts some of those headers in the display code.
--- drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv1_clk_mgr.c | 1 - .../drm/amd/display/dc/clk_mgr/dcn10/rv1_clk_mgr_vbios_smu.c | 1 - .../drm/amd/display/dc/clk_mgr/dcn30/dcn30_clk_mgr_smu_msg.c | 1 - drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_smu.c | 1 - drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_smu.c | 2 +- drivers/gpu/drm/amd/display/dc/link/accessories/link_dp_trace.c | 1 - .../gpu/drm/amd/display/dc/resource/dcn201/dcn201_resource.c | 1 - 7 files changed, 1 insertion(+), 7 deletions(-)
drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv1_clk_mgr.c +0 -1
@@ -23,7 +23,6 @@* */ -#include "reg_helper.h" #include "core_types.h" #include "clk_mgr_internal.h" #include "rv1_clk_mgr.h"
drivers/gpu/drm/amd/display/dc/clk_mgr/dcn10/rv1_clk_mgr_vbios_smu.c +0 -1
@@ -26,7 +26,6 @@#include "core_types.h" #include "clk_mgr_internal.h" #include "reg_helper.h" -#include <linux/delay.h> #include "rv1_clk_mgr_vbios_smu.h"
drivers/gpu/drm/amd/display/dc/clk_mgr/dcn30/dcn30_clk_mgr_smu_msg.c +0 -1
@@ -23,7 +23,6 @@* */ -#include <linux/delay.h> #include "dcn30_clk_mgr_smu_msg.h" #include "clk_mgr_internal.h"
drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_smu.c +0 -1
@@ -23,7 +23,6 @@* */ -#include <linux/delay.h> #include "core_types.h" #include "clk_mgr_internal.h" #include "reg_helper.h"
drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_smu.c +1 -1
@@ -29,6 +29,7 @@#include "dm_helpers.h" #include "dcn315_smu.h" #include "mp/mp_13_0_5_offset.h" +#include "logger_types.h" #define MAX_INSTANCE 6#define MAX_SEGMENT 6
@@ -69,7 +70,6 @@ static const struct IP_BASE NBIO_BASE = { { { { 0x00000000, 0x00000014, 0x00000D#define REG_NBIO (reg_name) \ (NBIO_BASE.instance[0].segment[regBIF_BX_PF2_ ## reg_name ## _BASE_IDX] + regBIF_BX_PF2_ ## reg_name) -#include "logger_types.h" #undef DC_LOGGER#define DC_LOGGER \ CTX->logger
drivers/gpu/drm/amd/display/dc/link/accessories/link_dp_trace.c +0 -1
@@ -24,7 +24,6 @@*/ #include "link_dp_trace.h" #include "link/protocols/link_dpcd.h" -#include "link.h" void dp_trace_init (struct dc_link *link) {
drivers/gpu/drm/amd/display/dc/resource/dcn201/dcn201_resource.c +0 -1
@@ -55,7 +55,6 @@#include "dce110/dce110_resource.h" #include "dce/dce_aux.h" #include "dce/dce_i2c.h" -#include "dcn201/dcn201_hubbub.h" #include "dcn10/dcn10_resource.h" #include "cyan_skillfish_ip_offset.h"
Signature · 1 line
2.44.0
PATCH 20/28 drm/amd/display: Drop legacy code
In reply to Hamza MahfoozFrom: Rodrigo Siqueira <[email protected]>
This commit removes code that are not used by display anymore.
--- .../amd/display/dc/inc/hw/stream_encoder.h | 4 --- drivers/gpu/drm/amd/display/dc/inc/resource.h | 7 ---- .../amd/display/dc/optc/dcn20/dcn20_optc.c | 10 ------ .../dc/resource/dcn21/dcn21_resource.c | 33 +------------------ 4 files changed, 1 insertion(+), 53 deletions(-)
drivers/gpu/drm/amd/display/dc/inc/hw/stream_encoder.h +0 -4
@@ -178,10 +178,6 @@ struct stream_encoder_funcs {void (*stop_dp_info_packets)(struct stream_encoder *enc); -void (*reset_fifo)( -struct stream_encoder *enc - ); -void (*dp_blank)(struct dc_link *link,struct stream_encoder *enc);
drivers/gpu/drm/amd/display/dc/inc/resource.h +0 -7
@@ -584,13 +584,6 @@ bool get_temp_dp_link_res(struct dc_link *link,struct link_resource *link_res, struct dc_link_settings *link_settings); -#if defined(CONFIG_DRM_AMD_DC_FP ) -struct hpo_dp_link_encoder *resource_get_hpo_dp_link_enc_for_det_lt ( -const struct resource_context *res_ctx, -const struct resource_pool *pool, -const struct dc_link *link); -#endif -void reset_syncd_pipes_from_disabled_pipes (struct dc *dc,struct dc_state *context);
drivers/gpu/drm/amd/display/dc/optc/dcn20/dcn20_optc.c +0 -10
@@ -462,16 +462,6 @@ void optc2_setup_manual_trigger(struct timing_generator *optc) {struct optc *optc1 =DCN10TG_FROM_TG (optc); -/* Set the min/max selectors unconditionally so that -* DMCUB fw may change OTG timings when necessary -* TODO: Remove the w/a after fixing the issue in DMCUB firmware -*/ -REG_UPDATE_4 (OTG_V_TOTAL_CONTROL , -OTG_V_TOTAL_MIN_SEL ,1 , -OTG_V_TOTAL_MAX_SEL ,1 , -OTG_FORCE_LOCK_ON_EVENT ,0 , -OTG_SET_V_TOTAL_MIN_MASK , (1 <<1 ));/* TRIGA */ - REG_SET_8(OTG_TRIGA_CNTL, 0, OTG_TRIGA_SOURCE_SELECT, 21, OTG_TRIGA_SOURCE_PIPE_SELECT, optc->inst,
drivers/gpu/drm/amd/display/dc/resource/dcn21/dcn21_resource.c +1 -32
@@ -581,32 +581,6 @@ static const struct resource_caps res_cap_rn = { .num_dsc = 3, }; -#ifdef DIAGS_BUILD -static const struct resource_caps res_cap_rn_FPGA_4pipe = { - .num_timing_generator =4 , - .num_opp =4 , - .num_video_plane =4 , - .num_audio =7 , - .num_stream_encoder =4 , - .num_pll =4 , - .num_dwb =1 , - .num_ddc =4 , - .num_dsc =0 , -}; - -static const struct resource_caps res_cap_rn_FPGA_2pipe_dsc = { - .num_timing_generator =2 , - .num_opp =2 , - .num_video_plane =2 , - .num_audio =7 , - .num_stream_encoder =2 , - .num_pll =4 , - .num_dwb =1 , - .num_ddc =4 , - .num_dsc =2 , -}; -#endif -static const struct dc_plane_cap plane_cap = { .type =DC_PLANE_TYPE_DCN_UNIVERSAL , .per_pixel_alpha = true,
@@ -1415,16 +1389,11 @@ static bool dcn21_resource_construct(struct dc_context *ctx = dc->ctx;struct irq_service_init_data init_data;uint32_t pipe_fuses =read_pipe_fuses (ctx); -uint32_t num_pipes; +uint32_t num_pipes =0 ; ctx->dc_bios->regs = &bios_regs; pool->base.res_cap = &res_cap_rn; -#ifdef DIAGS_BUILD -if (IS_FPGA_MAXIMUS_DC (dc->ctx->dce_environment)) -//pool->base.res_cap = &res_cap_nv10_FPGA_2pipe_dsc; - pool->base.res_cap = &res_cap_rn_FPGA_4pipe; -#endif pool->base.funcs = &dcn21_res_pool_funcs;
Signature · 1 line
2.44.0
PATCH 21/28 drm/amd/display: Update resource capabilities and debug struct for DCN201
In reply to Hamza MahfoozFrom: Rodrigo Siqueira <[email protected]>
Some of the resource capabilities for DCN201 and the debug default option are outdated. This commit just set some of the missing configurations for DCN201.
--- .../gpu/drm/amd/display/dc/resource/dcn201/dcn201_resource.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/gpu/drm/amd/display/dc/resource/dcn201/dcn201_resource.c +3 -1
@@ -566,6 +566,8 @@ static const struct resource_caps res_cap_dnc201 = { .num_audio = 2, .num_stream_encoder = 2, .num_pll = 2, + .num_dwb = 0, + .num_dsc = 0, .num_ddc = 2, };
@@ -612,7 +614,7 @@ static const struct dc_debug_options debug_defaults_drv = { .scl_reset_length10 = true, .sanity_checks = false, .underflow_assert_delay_us = 0xFFFFFFFF, - .enable_tri_buf = false, + .enable_tri_buf = true, .enable_legacy_fast_update = true, .using_dml2 = false, };
Signature · 1 line
2.44.0
PATCH 22/28 drm/amd/display: Disable P010 Support of DCN 1.0
In reply to Hamza MahfoozFrom: Rodrigo Siqueira <[email protected]>
[WHY]
DCN 1.0 is not ready for the P010 support.
[HOW]
1. Set the P010 plan_cap of DCN 1.0 to be false.
2. Let the DM do the plan cap initialization of DCN 1.0.
--- drivers/gpu/drm/amd/display/dc/resource/dcn10/dcn10_resource.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/display/dc/resource/dcn10/dcn10_resource.c +1 -1
@@ -513,7 +513,7 @@ static const struct dc_plane_cap plane_cap = { .argb8888 = true, .nv12 = true, .fp16 = true, - .p010 = true + .p010 = false }, .max_upscale_factor = {
Signature · 1 line
2.44.0
PATCH 23/28 drm/amd/display: Update DCN10 resource
In reply to Hamza MahfoozFrom: Rodrigo Siqueira <[email protected]>
Update DCN10 to use legacy fast update and ensure that the MPCC count is the same as the pipe_count.
--- drivers/gpu/drm/amd/display/dc/resource/dcn10/dcn10_resource.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/gpu/drm/amd/display/dc/resource/dcn10/dcn10_resource.c +2 -0
@@ -569,6 +569,7 @@ static const struct dc_debug_options debug_defaults_diags = { .disable_pplib_clock_request = true, .disable_pplib_wm_range = true, .underflow_assert_delay_us = 0xFFFFFFFF, + .enable_legacy_fast_update = true, };static void dcn10_dpp_destroy (struct dpp **dpp)
@@ -1631,6 +1632,7 @@ static bool dcn10_resource_construct(/* valid pipe num */ pool->base.pipe_count = j; pool->base.timing_generator_count = j; + pool->base.mpcc_count = j;/* within dml lib, it is hard code to 4. If ASIC pipe is fused, * the value may be changed
Signature · 1 line
2.44.0
PATCH 24/28 drm/amd/display: Add fallback configuration when set DRR
In reply to Hamza MahfoozFrom: Rodrigo Siqueira <[email protected]>
Set OTG/OPTC parameter to 0 if failed to set DRR.
--- .../gpu/drm/amd/display/dc/optc/dcn32/dcn32_optc.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)
drivers/gpu/drm/amd/display/dc/optc/dcn32/dcn32_optc.c +9 -2
@@ -293,9 +293,16 @@ static void optc32_set_drr( } optc->funcs->set_vtotal_min_max (optc, params->vertical_total_min -1 , params->vertical_total_max -1 ); - } +optc32_setup_manual_trigger (optc); + }else { +REG_UPDATE_4 (OTG_V_TOTAL_CONTROL , +OTG_SET_V_TOTAL_MIN_MASK ,0 , +OTG_V_TOTAL_MIN_SEL ,0 , +OTG_V_TOTAL_MAX_SEL ,0 , +OTG_FORCE_LOCK_ON_EVENT ,0 ); -optc32_setup_manual_trigger (optc); + optc->funcs->set_vtotal_min_max (optc,0 ,0 ); + } }static struct timing_generator_funcs dcn32_tg_funcs = {
Signature · 1 line
2.44.0
PATCH 25/28 drm/amd/display: Add fallback configuration for set DRR in DCN10
In reply to Hamza MahfoozFrom: Rodrigo Siqueira <[email protected]>
Set OTG/OPTC parameters to 0 if something goes wrong on DCN10.
--- .../drm/amd/display/dc/optc/dcn10/dcn10_optc.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-)
drivers/gpu/drm/amd/display/dc/optc/dcn10/dcn10_optc.c +12 -3
@@ -945,10 +945,19 @@ void optc1_set_drr(OTG_FORCE_LOCK_ON_EVENT ,0 ,OTG_SET_V_TOTAL_MIN_MASK_EN ,0 , OTG_SET_V_TOTAL_MIN_MASK, 0); - } -// Setup manual flow control for EOF via TRIG_A - optc->funcs->setup_manual_trigger (optc); +// Setup manual flow control for EOF via TRIG_A + optc->funcs->setup_manual_trigger (optc); + + }else { +REG_UPDATE_4 (OTG_V_TOTAL_CONTROL , +OTG_SET_V_TOTAL_MIN_MASK ,0 , +OTG_V_TOTAL_MIN_SEL ,0 , +OTG_V_TOTAL_MAX_SEL ,0 , +OTG_FORCE_LOCK_ON_EVENT ,0 ); + + optc->funcs->set_vtotal_min_max (optc,0 ,0 ); + } }void optc1_set_vtotal_min_max (struct timing_generator *optc,int vtotal_min,int vtotal_max)
Signature · 1 line
2.44.0
PATCH 26/28 drm/amd/display: Change DPCD address range
In reply to Hamza MahfoozFrom: Rodrigo Siqueira <[email protected]>
Change DP_PHY_REPEATER_EXTENDED_WAIT_TIMEOUT withDP_PHY_REPEATER_128B132B_RATES.
--- drivers/gpu/drm/amd/display/dc/link/protocols/link_dpcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/display/dc/link/protocols/link_dpcd.c +1 -1
@@ -130,7 +130,7 @@ static uint32_t dpcd_get_next_partition_size(const uint32_t address, const uint3* XXX: Do not allow any two address ranges in this array to overlap */ static const struct dpcd_address_range mandatory_dpcd_blocks[] = { - {DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV ,DP_PHY_REPEATER_EXTENDED_WAIT_TIMEOUT }}; + {DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV ,DP_PHY_REPEATER_128B132B_RATES }};/* * extend addresses to read all mandatory blocks together
Signature · 1 line
2.44.0
PATCH 27/28 drm/amd/display: Reorganize dwb header
In reply to Hamza MahfoozFrom: Rodrigo Siqueira <[email protected]>
This commit makes some small adjustments in the dwb header.
--- drivers/gpu/drm/amd/display/dc/inc/hw/dwb.h | 30 +++++++++++++-------- 1 file changed, 19 insertions(+), 11 deletions(-)
drivers/gpu/drm/amd/display/dc/inc/hw/dwb.h +19 -11
@@ -147,9 +147,10 @@ struct dwb_caps { unsigned int support_ogam :1; unsigned int support_wbscl :1; unsigned int support_ocsc :1; - unsigned int support_stereo :1; + unsigned int support_stereo :1; + unsigned int support_4k_120p :1; } caps; -unsigned int reserved2[9 ];/* Reserved for future use, MUST BE 0. */ +unsigned int reserved2[10 ];/* Reserved for future use, MUST BE 0. */ };struct dwbc {
@@ -166,8 +167,9 @@ struct dwbc {bool dwb_is_drc;int wb_src_plane_inst;/*hubp, mpcc, inst*/ uint32_t mask_id; -int otg_inst; -bool mvc_cfg; +int otg_inst; +bool mvc_cfg; +struct dc_dwb_params params; };struct dwbc_funcs {
@@ -192,6 +194,10 @@ struct dwbc_funcs {struct dwbc *dwbc, enum dwb_frame_capture_enable enable); +void (*dwb_set_scaler)( +struct dwbc *dwbc, +struct dc_dwb_params *params); +void (*set_stereo)(struct dwbc *dwbc,struct dwb_stereo_params *stereo_params);
@@ -205,9 +211,11 @@ struct dwbc_funcs {struct dwbc *dwbc, struct dwb_warmup_params *warmup_params); - +bool (*dwb_get_mcifbuf_line)( +struct dwbc *dwbc,unsigned int *buf_idx, +unsigned int *cur_line, +unsigned int *over_run);#if defined(CONFIG_DRM_AMD_DC_FP ) - void (*dwb_program_output_csc)( struct dwbc *dwbc, enum dc_color_space color_space,
@@ -216,17 +224,17 @@ struct dwbc_funcs {bool (*dwb_ogam_set_output_transfer_func)(struct dwbc *dwbc,const struct dc_transfer_func *in_transfer_func_dwb_ogam); - +#endif //TODO: merge with output_transfer_func? bool (*dwb_ogam_set_input_transfer_func)(struct dwbc *dwbc,const struct dc_transfer_func *in_transfer_func_dwb_ogam); -#endif + +void (*get_drr_time_stamp)( +struct dwbc *dwbc,uint32_t *time_stamp); +bool (*get_dwb_status)( struct dwbc *dwbc); -void (*dwb_set_scaler)( -struct dwbc *dwbc, - struct dc_dwb_params *params); };#endif
Signature · 1 line
2.44.0
PATCH 28/28 drm/amd/display: 3.2.280
In reply to Hamza MahfoozFrom: Aric Cyr <[email protected]>
This version brings along the following:
- DCN10 fixes
- DCN316 fixes
- DML2 fixes
- DWB fixes
- Expanded FAMS support
- Misc code style fixes
- ODM fixes
- VSC SDP fixes
--- drivers/gpu/drm/amd/display/dc/dc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/display/dc/dc.h +1 -1
@@ -53,7 +53,7 @@ struct aux_payload;struct set_config_cmd_payload ;struct dmub_notification ; -#define DC_VER "3.2.279" +#define DC_VER "3.2.280"#define MAX_SURFACES 3#define MAX_PLANES 6
Signature · 1 line
2.44.0