Skip to contentSkip to conversation

arm64: dts: qcom: msm8916-samsung-fortuna: Add touchscreen and PWM backlight

PATCH Applied Raymond Hackley 2 participants 4 messages Apr 4, 2024

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

v3 cover arm64: dts: qcom: msm8916-samsung-fortuna: Add touchscreen and PWM backlight

Like msm8916-samsung-a3u-eur, the Grand Prime uses a Zinitix BT541 touchscreen. Add it together with the necessary fixed-regulator to the device tree.

Most of the Galaxy Grand Prime use backlight drivers controlled with PWM signal.
To simplify the description, add the backlight with the necessary clk-pwm to the common dtsi.

---
v2: Add &touchscreen. Keep i2c5 enabled
v3: Drop linux,keycodes. Add PWM backlight

#1 lore raw

PATCH v3 1/2 arm64: dts: qcom: msm8916-samsung-fortuna: Add touchscreen

From: Joe Mason <[email protected]>

Like msm8916-samsung-a3u-eur, the Grand Prime uses a Zinitix BT541 touchscreen. Add it together with the necessary fixed-regulator to the device tree.

[Raymond: Move to fortuna-common. Use interrupts-extended]
---
 .../qcom/msm8916-samsung-fortuna-common.dtsi  | 47 +++++++++++++++++++
 .../qcom/msm8916-samsung-rossa-common.dtsi    |  3 ++
 2 files changed, 50 insertions(+)
arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi +47 -0
index c2800ad2dd5b..6c66a24ef1af 100644
@@ -66,6 +66,19 @@ reg_motor_vdd: regulator-motor-vdd {
 		pinctrl-0 = <&motor_en_default>;
 		pinctrl-names = "default";
 	};
+
+	reg_vdd_tsp_a: regulator-vdd-tsp-a {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_tsp_a";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+
+		gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&tsp_en_default>;
+		pinctrl-names = "default";
+	};
 };
 
 &blsp_i2c1 {
@@ -94,6 +107,26 @@ fuel-gauge@35 {
 	};
 };
 
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen: touchscreen@20 {
+		compatible = "zinitix,bt541";
+		reg = <0x20>;
+
+		interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>;
+
+		touchscreen-size-x = <540>;
+		touchscreen-size-y = <960>;
+
+		vcca-supply = <&reg_vdd_tsp_a>;
+		vdd-supply = <&pm8916_l6>;
+
+		pinctrl-0 = <&tsp_int_default>;
+		pinctrl-names = "default";
+	};
+};
+
 &blsp_uart2 {
 	status = "okay";
 };
@@ -200,4 +233,18 @@ sdc2_cd_default: sdc2-cd-default-state {
 		drive-strength = <2>;
 		bias-disable;
 	};
+
+	tsp_en_default: tsp-en-default-state {
+		pins = "gpio73";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_int_default: tsp-int-default-state {
+		pins = "gpio13";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
 };
arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi +3 -0
index 42843771ae2a..4048b72efcdc 100644
@@ -5,6 +5,9 @@
 /* SM5504 MUIC instead of SM5502 */
 /delete-node/ &muic;
 
+/* Touchscreen varies depending on model variant */
+/delete-node/ &touchscreen;
+
 &blsp_i2c1 {
 	muic: extcon@14 {
 		compatible = "siliconmitus,sm5504-muic";
Signature · 1 line
2.39.2
#2 lore raw

PATCH v3 2/2 arm64: dts: qcom: msm8916-samsung-fortuna: Add PWM backlight

In reply to Raymond Hackley

From: Siddharth Manthan <[email protected]>

Most of the Galaxy Grand Prime use backlight drivers controlled with PWM signal.
To simplify the description, add the backlight with the necessary clk-pwm to the common dtsi.

[Stephan: Move to fortuna-common and disable on rossa-common]
[Raymond: Add the commit message]
---
 .../qcom/msm8916-samsung-fortuna-common.dtsi  | 36 +++++++++++++++++++
 .../qcom/msm8916-samsung-rossa-common.dtsi    |  9 +++++
 2 files changed, 45 insertions(+)
arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi +36 -0
index 6c66a24ef1af..5e933fb8b363 100644
@@ -26,6 +26,30 @@ tz-apps@85a00000 {
 		};
 	};
 
+	clk_pwm_backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&clk_pwm 0 100000>;
+
+		enable-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
+
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <128>;
+
+		pinctrl-0 = <&backlight_en_default>;
+		pinctrl-names = "default";
+	};
+
+	clk_pwm: pwm {
+		compatible = "clk-pwm";
+		#pwm-cells = <2>;
+
+		clocks = <&gcc GCC_GP2_CLK>;
+
+		pinctrl-0 = <&backlight_pwm_default>;
+		pinctrl-names = "default";
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -199,6 +223,18 @@ &wcnss_mem {
 };
 
 &tlmm {
+	backlight_en_default: backlight-en-default-state {
+		pins = "gpio98";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	backlight_pwm_default: backlight-pwm-default-state {
+		pins = "gpio50";
+		function = "gcc_gp2_clk_a";
+	};
+
 	fg_alert_default: fg-alert-default-state {
 		pins = "gpio121";
 		function = "gpio";
arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi +9 -0
index 4048b72efcdc..b438fa81886c 100644
@@ -17,3 +17,12 @@ muic: extcon@14 {
 		pinctrl-names = "default";
 	};
 };
+
+/* On rossa backlight is controlled with MIPI DCS commands */
+&clk_pwm {
+	status = "disabled";
+};
+
+&clk_pwm_backlight {
+	status = "disabled";
+};
Signature · 1 line
2.39.2
maintainer Applied
#3 lore raw
In reply to Raymond Hackley
Quoted 10 lines · Raymond Hackley

Like msm8916-samsung-a3u-eur, the Grand Prime uses a Zinitix BT541 touchscreen. Add it together with the necessary fixed-regulator to the device tree.

Most of the Galaxy Grand Prime use backlight drivers controlled with PWM signal.
To simplify the description, add the backlight with the necessary clk-pwm to the common dtsi.

[...]

Applied, thanks!

[1/2] arm64: dts: qcom: msm8916-samsung-fortuna: Add touchscreen

      commit: f8dddefcb90eaa339c77b2cb3f5a87dec8b1e3b5
[2/2] arm64: dts: qcom: msm8916-samsung-fortuna: Add PWM backlight
      commit: 05c65922bd58cc3fc057b37628b143f76e524496

Best regards,

Signature · 1 line
Bjorn Andersson <[email protected]>