Fix the regulator-state-standby definition

make dtbs_check DT_SCHEMA_FILES=microchip,mcp16502.yaml

at91-sama7g5ek.dtb: mcp16502@5b: regulators:VDD_(CORE|OTHER)|LDO[1-2]:
regulator-state-standby 'regulator-suspend-voltage' does not match any of the regexes 'pinctrl-[0-9]+' from schema
$id: http://devicetree.org/schemas/regulator/microchip,mcp16502.yaml#

at91-sama7g54_curiosity.dtb: pmic@5b: regulators:VDD_(CORE|OTHER)|LDO[1-2]:
regulator-state-standby 'regulator-suspend-voltage' does not match any of the regexes 'pinctrl-[0-9]+' from schema
$id: http://devicetree.org/schemas/regulator/microchip,mcp16502.yaml#

This patch series proposes to correct the typo that was entered by mistake into devicetree definition regulator-state-standby by replacing regulator-suspend-voltage with regulator-suspend-microvolt.

--------------------
v1 -> v2:
- drop "boot" from title
- put in commit message a snippet with the warning to explain the chang
--------------------
Andrei Simion (2):
ARM: dts: microchip: at91-sama7g5ek: Replace regulator-suspend-voltage
with the valid property
ARM: dts: microchip: at91-sama7g54_curiosity: Replace
regulator-suspend-voltage with the valid property

 arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts | 8 ++++----
 arch/arm/boot/dts/microchip/at91-sama7g5ek.dts          | 8 ++++----
 2 files changed, 8 insertions(+), 8 deletions(-)

2.34.1

By checking the pmic node with microchip,mcp16502.yaml# 'regulator-suspend-voltage' does not match any of the regexes 'pinctrl-[0-9]+' from schema microchip,mcp16502.yaml# which inherits regulator.yaml# So replace regulator-suspend-voltage with regulator-suspend-microvolt to avoid the inconsitency.

---
v1 -> v2:
- drop "boot" from title
- put in commit message a snippet with the warning to explain the change

---
 arch/arm/boot/dts/microchip/at91-sama7g5ek.dts | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

index 217e9b96c61e..20b2497657ae 100644
@@ -293,7 +293,7 @@ vddcore: VDD_CORE {
 
 					regulator-state-standby {
 						regulator-on-in-suspend;
-						regulator-suspend-voltage = <1150000>;
+						regulator-suspend-microvolt = <1150000>;
 						regulator-mode = <4>;
 					};
 

@@ -314,7 +314,7 @@ vddcpu: VDD_OTHER {
 
 					regulator-state-standby {
 						regulator-on-in-suspend;
-						regulator-suspend-voltage = <1050000>;
+						regulator-suspend-microvolt = <1050000>;
 						regulator-mode = <4>;
 					};
 

@@ -331,7 +331,7 @@ vldo1: LDO1 {
 					regulator-always-on;
 
 					regulator-state-standby {
-						regulator-suspend-voltage = <1800000>;
+						regulator-suspend-microvolt = <1800000>;
 						regulator-on-in-suspend;
 					};
 

@@ -346,7 +346,7 @@ vldo2: LDO2 {
 					regulator-max-microvolt = <3700000>;
 
 					regulator-state-standby {
-						regulator-suspend-voltage = <1800000>;
+						regulator-suspend-microvolt = <1800000>;
 						regulator-on-in-suspend;
 					};
 

2.34.1

By checking the pmic node with microchip,mcp16502.yaml# 'regulator-suspend-voltage' does not match any of the regexes 'pinctrl-[0-9]+' from schema microchip,mcp16502.yaml# which inherits regulator.yaml#. So replace regulator-suspend-voltage with regulator-suspend-microvolt to avoid the inconsitency.

---
v1 -> v2:
- drop "boot" from title
- put in commit message a snippet with the warning to explain the change

---
 arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

index 4f609e9e510e..009d2c832421 100644
@@ -242,7 +242,7 @@ vddcore: VDD_CORE {
 
 					regulator-state-standby {
 						regulator-on-in-suspend;
-						regulator-suspend-voltage = <1150000>;
+						regulator-suspend-microvolt = <1150000>;
 						regulator-mode = <4>;
 					};
 

@@ -263,7 +263,7 @@ vddcpu: VDD_OTHER {
 
 					regulator-state-standby {
 						regulator-on-in-suspend;
-						regulator-suspend-voltage = <1050000>;
+						regulator-suspend-microvolt = <1050000>;
 						regulator-mode = <4>;
 					};
 

@@ -280,7 +280,7 @@ vldo1: LDO1 {
 					regulator-always-on;
 
 					regulator-state-standby {
-						regulator-suspend-voltage = <1800000>;
+						regulator-suspend-microvolt = <1800000>;
 						regulator-on-in-suspend;
 					};
 

@@ -296,7 +296,7 @@ vldo2: LDO2 {
 					regulator-always-on;
 
 					regulator-state-standby {
-						regulator-suspend-voltage = <3300000>;
+						regulator-suspend-microvolt = <3300000>;
 						regulator-on-in-suspend;
 					};
 

2.34.1

Applied to at91-fixes, thanks!