hwmon: Handle HAS_IOPORT dependencies
cover hwmon: Handle HAS_IOPORT dependencies
Hi Jean, Guenter,
This is a follow up in my ongoing effort of making inb()/outb() and similar I/O port accessors compile-time optional. Previously I sent this as a treewide series titled "treewide: Remove I/O port accessors for HAS_IOPORT=n" with the latest being its 5th version[0]. With a significant subset of patches merged I've changed over to per-subsystem series. These series are stand alone and should be merged via the relevant tree such that with all subsystems complete we can follow this up with the final patch that will make the I/O port accessors compile-time optional.
The current state of the full series with changes to the remaining subsystems and the aforementioned final patch can be found for your convenience on my git.kernel.org tree in the has_ioport_v6 branch[1] with signed tags. As for compile-time vs runtime see Linus' reply to my first attempt[2].
Thanks,
Niklas
[0] https://lore.kernel.org/all/[email protected]/
[1] https://git.kernel.org/pub/scm/linux/kernel/git/niks/linux.git/log/?h=has_ioport_v6
[2] https://lore.kernel.org/lkml/CAHk-=wg80je=K7madF4e7WrRNp37e3qh6y10Svhdc7O8SZ_-8g@mail.gmail.com/
Niklas Schnelle (1):
hwmon: add HAS_IOPORT dependencies
drivers/hwmon/Kconfig | 25 ++++++++++++++++++++----- 1 file changed, 20 insertions(+), 5 deletions(-)
Signature · 1 line
2.40.1
PATCH 1/1 hwmon: add HAS_IOPORT dependencies
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at compile time. We thus need to add HAS_IOPORT as dependency for those drivers using them.
---
Note: This patch does not depend any not-yet-mainline HAS_IOPORT changes and may be merged via subsystem specific trees at your earliest convenience.
drivers/hwmon/Kconfig | 25 ++++++++++++++++++++----- 1 file changed, 20 insertions(+), 5 deletions(-)
drivers/hwmon/Kconfig +20 -5
@@ -40,7 +40,7 @@ comment "Native drivers" config SENSORS_ABITUGURU tristate "Abit uGuru (rev 1 & 2)" - depends on (X86 && DMI) || COMPILE_TEST + depends on (X86 && DMI) || COMPILE_TEST && HAS_IOPORT help If you say yes here you get support for the sensor part of the first and second revision of the Abit uGuru chip. The voltage and frequency
@@ -55,7 +55,7 @@ config SENSORS_ABITUGURU config SENSORS_ABITUGURU3 tristate "Abit uGuru (rev 3)" - depends on (X86 && DMI) || COMPILE_TEST + depends on (X86 && DMI) || COMPILE_TEST && HAS_IOPORT help If you say yes here you get support for the sensor part of the third revision of the Abit uGuru chip. Only reading the sensors
@@ -611,6 +611,7 @@ config SENSORS_SPARX5 config SENSORS_F71805F tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG" + depends on HAS_IOPORT depends on !PPC help If you say yes here you get support for hardware monitoring
@@ -622,6 +623,7 @@ config SENSORS_F71805F config SENSORS_F71882FG tristate "Fintek F71882FG and compatibles" + depends on HAS_IOPORT depends on !PPC help If you say yes here you get support for hardware monitoring
@@ -854,6 +856,7 @@ config SENSORS_CORETEMP config SENSORS_IT87 tristate "ITE IT87xx and compatibles" + depends on HAS_IOPORT depends on !PPC select HWMON_VID help
@@ -1561,6 +1564,7 @@ config SENSORS_LM95245 config SENSORS_PC87360 tristate "National Semiconductor PC87360 family" + depends on HAS_IOPORT depends on !PPC select HWMON_VID help
@@ -1575,6 +1579,7 @@ config SENSORS_PC87360 config SENSORS_PC87427 tristate "National Semiconductor PC87427" + depends on HAS_IOPORT depends on !PPC help If you say yes here you get access to the hardware monitoring
@@ -1606,6 +1611,7 @@ config SENSORS_NTC_THERMISTOR config SENSORS_NCT6683 tristate "Nuvoton NCT6683D" + depends on HAS_IOPORT depends on !PPC help If you say yes here you get support for the hardware monitoring
@@ -1627,6 +1633,7 @@ config SENSORS_NCT6775_CORE config SENSORS_NCT6775 tristate "Platform driver for Nuvoton NCT6775F and compatibles" + depends on HAS_IOPORT depends on !PPC depends on ACPI || ACPI=n select HWMON_VID
@@ -1883,7 +1890,7 @@ config SENSORS_SHTC1 config SENSORS_SIS5595 tristate "Silicon Integrated Systems Corp. SiS5595" - depends on PCI + depends on PCI && HAS_IOPORT help If you say yes here you get support for the integrated sensors in SiS5595 South Bridges.
@@ -1903,6 +1910,7 @@ config SENSORS_SY7636A config SENSORS_DME1737 tristate "SMSC DME1737, SCH311x and compatibles" + depends on HAS_IOPORT depends on I2C && !PPC select HWMON_VID help
@@ -1959,6 +1967,7 @@ config SENSORS_EMC6W201 config SENSORS_SMSC47M1 tristate "SMSC LPC47M10x and compatibles" + depends on HAS_IOPORT depends on !PPC help If you say yes here you get support for the integrated fan
@@ -1993,6 +2002,7 @@ config SENSORS_SMSC47M192 config SENSORS_SMSC47B397 tristate "SMSC LPC47B397-NC" + depends on HAS_IOPORT depends on !PPC help If you say yes here you get support for the SMSC LPC47B397-NC
@@ -2007,6 +2017,7 @@ config SENSORS_SCH56XX_COMMON config SENSORS_SCH5627 tristate "SMSC SCH5627" + depends on HAS_IOPORT depends on !PPC && WATCHDOG select SENSORS_SCH56XX_COMMON select WATCHDOG_CORE
@@ -2020,6 +2031,7 @@ config SENSORS_SCH5627 config SENSORS_SCH5636 tristate "SMSC SCH5636" + depends on HAS_IOPORT depends on !PPC && WATCHDOG select SENSORS_SCH56XX_COMMON select WATCHDOG_CORE
@@ -2272,7 +2284,7 @@ config SENSORS_VIA_CPUTEMP config SENSORS_VIA686A tristate "VIA686A" - depends on PCI + depends on PCI && HAS_IOPORT help If you say yes here you get support for the integrated sensors in Via 686A/B South Bridges.
@@ -2282,6 +2294,7 @@ config SENSORS_VIA686A config SENSORS_VT1211 tristate "VIA VT1211" + depends on HAS_IOPORT depends on !PPC select HWMON_VID help
@@ -2293,7 +2306,7 @@ config SENSORS_VT1211 config SENSORS_VT8231 tristate "VIA VT8231" - depends on PCI + depends on PCI && HAS_IOPORT select HWMON_VID help If you say yes here then you get support for the integrated sensors
@@ -2401,6 +2414,7 @@ config SENSORS_W83L786NG config SENSORS_W83627HF tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF" + depends on HAS_IOPORT depends on !PPC select HWMON_VID help
@@ -2413,6 +2427,7 @@ config SENSORS_W83627HF config SENSORS_W83627EHF tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG" + depends on HAS_IOPORT depends on !PPC select HWMON_VID help
Signature · 1 line
2.40.1
Re: [PATCH 1/1] hwmon: add HAS_IOPORT dependencies
Quoted 8 lines · Niklas Schnelle
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at compile time. We thus need to add
HAS_IOPORTas dependency for those drivers using them.Acked-by Guenter Roeck <[email protected]>Co-developed-by Arnd Bergmann <[email protected]>Signed-off-by Arnd Bergmann <[email protected]>Signed-off-by Niklas Schnelle <[email protected]>
Applied.
Guenter