Support Lunar Lake and Arrow Lake uncore PMU
Subsystems (2)
cover Support Lunar Lake and Arrow Lake uncore PMU
From: Kan Liang <[email protected]>
From the uncore PMU's perspective, the Lunar Lake and Arrow Lake are the same, which are similar to the previous generation Meteor Lake. The uncore PerfMon registers are located at both MSR and MMIO space. The patch set is to enable the uncore PMUs for the Lunar Lake and Arrow Lake.
Kan Liang (2):
perf/x86/intel/uncore: Factor out common MMIO init and ops functions perf/x86/intel/uncore: Add Lunar Lake and Arrow Lake support
Zhenyu Wang (2):
perf/x86/intel/uncore: Add LNL uncore iMC freerunning support perf/x86/intel/uncore: Use D0:F0 as a default device
arch/x86/events/intel/uncore.c | 7 ++ arch/x86/events/intel/uncore.h | 2 + arch/x86/events/intel/uncore_snb.c | 169 ++++++++++++++++++++++++++--- 3 files changed, 161 insertions(+), 17 deletions(-)
Signature · 1 line
2.35.1
PATCH 1/4 perf/x86/intel/uncore: Factor out common MMIO init and ops functions
From: Kan Liang <[email protected]>
Some uncore PMON registers are located in the MMIO space. For the client machine, the MMIO space is usually located at D0:F0 but in a different BAR. For example, some uncore PMON registers are located in the SAF BAR, not the MCHBAR in the Lunar Lake.
The current __uncore_imc_init_box() hard code the BAR information. Factor out the uncore_get_box_mmio_addr() which uses the BAR information as a parameter.
The only change is the error output message. The hardcode name 'MCHBAR' is replaced by the offset of a BAR.
Add a new macro, MMIO_UNCORE_COMMON_OPS(), since the MMIO ops functions are usually the same among different generations.
--- arch/x86/events/intel/uncore_snb.c | 47 +++++++++++++++++++----------- 1 file changed, 30 insertions(+), 17 deletions(-)
arch/x86/events/intel/uncore_snb.c +30 -17
@@ -1481,33 +1481,35 @@ static struct pci_dev *tgl_uncore_get_mc_dev(void)#define TGL_UNCORE_MMIO_IMC_MEM_OFFSET 0x10000#define TGL_UNCORE_PCI_IMC_MAP_SIZE 0xe000 -static void __uncore_imc_init_box (struct intel_uncore_box *box, -unsigned int base_offset) +static void +uncore_get_box_mmio_addr (struct intel_uncore_box *box, +unsigned int base_offset, +int bar_offset,int step) {struct pci_dev *pdev =tgl_uncore_get_mc_dev ();struct intel_uncore_pmu *pmu = box->pmu;struct intel_uncore_type *type = pmu->type;resource_size_t addr; -u32 mch_bar; +u32 bar;if (!pdev) {pr_warn ("perf uncore: Cannot find matched IMC device.\n" );return ; } -pci_read_config_dword (pdev,SNB_UNCORE_PCI_IMC_BAR_OFFSET , &mch_bar); -/* MCHBAR is disabled */ -if (!(mch_bar &BIT (0 ))) { -pr_warn ("perf uncore: MCHBAR is disabled. Failed to map IMC free-running counters.\n" ); +pci_read_config_dword (pdev, bar_offset, &bar); +if (!(bar &BIT (0 ))) { +pr_warn ("perf uncore: BAR 0x%x is disabled. Failed to map %s counters.\n" , + bar_offset, type->name);pci_dev_put (pdev);return ; } - mch_bar &= ~BIT (0 ); - addr = (resource_size_t)(mch_bar +TGL_UNCORE_MMIO_IMC_MEM_OFFSET * pmu->pmu_idx); + bar &= ~BIT (0 ); + addr = (resource_size_t)(bar + step * pmu->pmu_idx);#ifdef CONFIG_PHYS_ADDR_T_64BIT -pci_read_config_dword (pdev,SNB_UNCORE_PCI_IMC_BAR_OFFSET +4 , &mch_bar); - addr |= ((resource_size_t )mch_bar <<32 ); +pci_read_config_dword (pdev, bar_offset +4 , &bar); + addr |= ((resource_size_t )bar <<32 );#endif addr += base_offset;
@@ -1518,6 +1520,14 @@ static void __uncore_imc_init_box(struct intel_uncore_box *box,pci_dev_put (pdev); } +static void __uncore_imc_init_box (struct intel_uncore_box *box, +unsigned int base_offset) +{ +uncore_get_box_mmio_addr (box, base_offset, +SNB_UNCORE_PCI_IMC_BAR_OFFSET , +TGL_UNCORE_MMIO_IMC_MEM_OFFSET ); +} +static void tgl_uncore_imc_freerunning_init_box (struct intel_uncore_box *box) {__uncore_imc_init_box (box,0 );
@@ -1612,14 +1622,17 @@ static void adl_uncore_mmio_enable_box(struct intel_uncore_box *box)writel (0 , box->io_addr +uncore_mmio_box_ctl (box)); } +#define MMIO_UNCORE_COMMON_OPS () \ + .exit_box = uncore_mmio_exit_box, \ + .disable_box = adl_uncore_mmio_disable_box, \ + .enable_box = adl_uncore_mmio_enable_box, \ + .disable_event = intel_generic_uncore_mmio_disable_event, \ + .enable_event = intel_generic_uncore_mmio_enable_event, \ + .read_counter = uncore_mmio_read_counter, +static struct intel_uncore_ops adl_uncore_mmio_ops = { .init_box = adl_uncore_imc_init_box, - .exit_box = uncore_mmio_exit_box, - .disable_box = adl_uncore_mmio_disable_box, - .enable_box = adl_uncore_mmio_enable_box, - .disable_event = intel_generic_uncore_mmio_disable_event, - .enable_event = intel_generic_uncore_mmio_enable_event, - .read_counter = uncore_mmio_read_counter, +MMIO_UNCORE_COMMON_OPS () };#define ADL_UNC_CTL_CHMASK_MASK 0x00000f00
Signature · 1 line
2.35.1
PATCH 2/4 perf/x86/intel/uncore: Add Lunar Lake and Arrow Lake support
In reply to [email protected]From: Kan Liang <[email protected]>
The uncore subsystem for Lunar Lake and Arrow Lake are similar to the previous Meteor Lake. The uncore PerfMon registers are located at both MSR and MMIO space.
The CBOX, ARB, and iMC are kept. There is no difference from the Meteor Lake.
The sNCU is moved to the MMIO space.
The HBO is newly added and only be accessed from the MMIO space.
--- arch/x86/events/intel/uncore.c | 7 ++ arch/x86/events/intel/uncore.h | 2 + arch/x86/events/intel/uncore_snb.c | 117 +++++++++++++++++++++++++++++ 3 files changed, 126 insertions(+)
arch/x86/events/intel/uncore.c +7 -0
@@ -1794,6 +1794,11 @@ static const struct intel_uncore_init_fun mtl_uncore_init __initconst = { .mmio_init = adl_uncore_mmio_init, }; +static const struct intel_uncore_init_fun lnl_uncore_init__initconst = { + .cpu_init = lnl_uncore_cpu_init, + .mmio_init = lnl_uncore_mmio_init, +}; +static const struct intel_uncore_init_fun icx_uncore_init__initconst = { .cpu_init = icx_uncore_cpu_init, .pci_init = icx_uncore_pci_init,
@@ -1871,6 +1876,8 @@ static const struct x86_cpu_id intel_uncore_match[] __initconst = {X86_MATCH_INTEL_FAM6_MODEL (RAPTORLAKE_S , &adl_uncore_init),X86_MATCH_INTEL_FAM6_MODEL (METEORLAKE , &mtl_uncore_init),X86_MATCH_INTEL_FAM6_MODEL (METEORLAKE_L , &mtl_uncore_init), +X86_MATCH_INTEL_FAM6_MODEL (LUNARLAKE_M , &lnl_uncore_init), +X86_MATCH_INTEL_FAM6_MODEL (ARROWLAKE , &lnl_uncore_init),X86_MATCH_INTEL_FAM6_MODEL (SAPPHIRERAPIDS_X , &spr_uncore_init),X86_MATCH_INTEL_FAM6_MODEL (EMERALDRAPIDS_X , &spr_uncore_init), X86_MATCH_INTEL_FAM6_MODEL(GRANITERAPIDS_X, &gnr_uncore_init),
arch/x86/events/intel/uncore.h +2 -0
@@ -607,10 +607,12 @@ void skl_uncore_cpu_init(void);void icl_uncore_cpu_init (void );void tgl_uncore_cpu_init (void );void adl_uncore_cpu_init (void ); +void lnl_uncore_cpu_init (void );void mtl_uncore_cpu_init (void );void tgl_uncore_mmio_init (void );void tgl_l_uncore_mmio_init (void );void adl_uncore_mmio_init (void ); +void lnl_uncore_mmio_init (void );int snb_pci2phy_map_init (int devid);/* uncore_snbep.c */
arch/x86/events/intel/uncore_snb.c +117 -0
132 lines not on this page · raw message
Signature · 1 line
2.35.1
PATCH 3/4 perf/x86/intel/uncore: Add LNL uncore iMC freerunning support
In reply to [email protected]From: Zhenyu Wang <[email protected]>
LNL uncore imc freerunning counters keep same as previous HW.
--- arch/x86/events/intel/uncore_snb.c | 1 + 1 file changed, 1 insertion(+)
arch/x86/events/intel/uncore_snb.c +1 -0
@@ -1824,6 +1824,7 @@ static struct intel_uncore_type *lnl_mmio_uncores[] = { &adl_uncore_imc, &lnl_uncore_hbo, &lnl_uncore_sncu, + &adl_uncore_imc_free_running, NULL };
Signature · 1 line
2.35.1
PATCH 4/4 perf/x86/intel/uncore: Use D0:F0 as a default device
In reply to [email protected]From: Zhenyu Wang <[email protected]>
Some uncore PMON registers are located in the MMIO space of the Host Bridge and DRAM Controller device, which is located at D0:F0 for Tiger Lake and later client generation.
Use D0:F0 as a default device. So it doesn't need to keep adding the complete Device ID list for each generation anymore.
--- arch/x86/events/intel/uncore_snb.c | 4 ++++ 1 file changed, 4 insertions(+)
arch/x86/events/intel/uncore_snb.c +4 -0
@@ -1488,6 +1488,10 @@ static struct pci_dev *tgl_uncore_get_mc_dev(void) ids++; } +/* Just try to grab 00:00.0 device */ +if (!mc_dev) + mc_dev =pci_get_domain_bus_and_slot (0 ,0 ,PCI_DEVFN (0 ,0 )); +return mc_dev; }
Signature · 1 line
2.35.1