Skip to contentSkip to conversation

i2c: Handle HAS_IOPORT dependencies

PATCH Applied Niklas Schnelle 5 participants 6 messages Apr 5, 2024 – Apr 8, 2024 I2C subsystem host drivers

lore
Share & tools
lore
#0 lore raw

v2 cover i2c: Handle HAS_IOPORT dependencies

Hi,

This is a follow up in my ongoing effort of making inb()/outb() and similar I/O port accessors compile-time optional. Previously I sent this as a treewide series titled "treewide: Remove I/O port accessors for HAS_IOPORT=n" with the latest being its 5th version[0]. With a significant subset of patches merged I've changed over to per-subsystem series. These series are stand alone and should be merged via the relevant tree such that with all subsystems complete we can follow this up with the final patch that will make the I/O port accessors compile-time optional.

The current state of the full series with changes to the remaining subsystems and the aforementioned final patch can be found for your convenience on my git.kernel.org tree in the has_ioport branch[1]. As for compile-time vs runtime see Linus' reply to my first attempt[2].

Thanks,
Niklas

[0] https://lore.kernel.org/all/[email protected]/
[1] https://git.kernel.org/pub/scm/linux/kernel/git/niks/linux.git/log/?h=has_ioport
[2] https://lore.kernel.org/lkml/CAHk-=wg80je=K7madF4e7WrRNp37e3qh6y10Svhdc7O8SZ_-8g@mail.gmail.com/

Changes since v1:
- Removed HAS_IOPORT dependency for I2C_PARPORT as it could be used with MMIO based parallel port driver

Niklas Schnelle (1):
i2c: add HAS_IOPORT dependencies

 drivers/i2c/busses/Kconfig | 30 ++++++++++++++++--------------
 1 file changed, 16 insertions(+), 14 deletions(-)
Signature · 1 line
2.40.1
#1 lore raw

PATCH v2 1/1 i2c: add HAS_IOPORT dependencies

In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at compile time. We thus need to add HAS_IOPORT as dependency for those drivers using them.

---
Note: This patch does not depend any not-yet-mainline HAS_IOPORT changes and may be merged via subsystem specific trees at your earliest convenience.

v1 - v2:
- Removed HAS_IOPORT dependency for I2C_PARPORT

 drivers/i2c/busses/Kconfig | 30 ++++++++++++++++--------------
 1 file changed, 16 insertions(+), 14 deletions(-)
drivers/i2c/busses/Kconfig +16 -14
index 97989c914260..5f4dc31ed142 100644
@@ -18,7 +18,7 @@ config I2C_CCGX_UCSI
 
 config I2C_ALI1535
 	tristate "ALI 1535"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the SMB
 	  Host controller on Acer Labs Inc. (ALI) M1535 South Bridges.  The SMB
@@ -30,7 +30,7 @@ config I2C_ALI1535
 
 config I2C_ALI1563
 	tristate "ALI 1563"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the SMB
 	  Host controller on Acer Labs Inc. (ALI) M1563 South Bridges.  The SMB
@@ -42,7 +42,7 @@ config I2C_ALI1563
 
 config I2C_ALI15X3
 	tristate "ALI 15x3"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the
 	  Acer Labs Inc. (ALI) M1514 and M1543 motherboard I2C interfaces.
@@ -52,7 +52,7 @@ config I2C_ALI15X3
 
 config I2C_AMD756
 	tristate "AMD 756/766/768/8111 and nVidia nForce"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the AMD
 	  756/766/768 mainboard I2C interfaces.  The driver also includes
@@ -77,7 +77,7 @@ config I2C_AMD756_S4882
 
 config I2C_AMD8111
 	tristate "AMD 8111"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the
 	  second (SMBus 2.0) AMD 8111 mainboard I2C interface.
@@ -107,7 +107,7 @@ config I2C_HIX5HD2
 
 config I2C_I801
 	tristate "Intel 82801 (ICH/PCH)"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	select P2SB if X86
 	select CHECK_SIGNATURE if X86 && DMI
 	select I2C_SMBUS
@@ -165,7 +165,7 @@ config I2C_I801
 
 config I2C_ISCH
 	tristate "Intel SCH SMBus 1.0"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	select LPC_SCH
 	help
 	  Say Y here if you want to use SMBus controller on the Intel SCH
@@ -186,7 +186,7 @@ config I2C_ISMT
 
 config I2C_PIIX4
 	tristate "Intel PIIX4 and compatible (ATI/AMD/Serverworks/Broadcom/SMSC)"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the Intel
 	  PIIX4 family of mainboard I2C interfaces.  Specifically, the following
@@ -232,7 +232,7 @@ config I2C_CHT_WC
 
 config I2C_NFORCE2
 	tristate "Nvidia nForce2, nForce3 and nForce4"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the Nvidia
 	  nForce2, nForce3 and nForce4 families of mainboard I2C interfaces.
@@ -265,7 +265,7 @@ config I2C_NVIDIA_GPU
 
 config I2C_SIS5595
 	tristate "SiS 5595"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the
 	  SiS5595 SMBus (a subset of I2C) interface.
@@ -275,7 +275,7 @@ config I2C_SIS5595
 
 config I2C_SIS630
 	tristate "SiS 630/730/964"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the
 	  SiS630, SiS730 and SiS964 SMBus (a subset of I2C) interface.
@@ -285,7 +285,7 @@ config I2C_SIS630
 
 config I2C_SIS96X
 	tristate "SiS 96x"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the SiS
 	  96x SMBus (a subset of I2C) interfaces.  Specifically, the following
@@ -303,7 +303,7 @@ config I2C_SIS96X
 
 config I2C_VIA
 	tristate "VIA VT82C586B"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	select I2C_ALGOBIT
 	help
 	  If you say yes to this option, support will be included for the VIA
@@ -314,7 +314,7 @@ config I2C_VIA
 
 config I2C_VIAPRO
 	tristate "VIA VT82C596/82C686/82xx and CX700/VX8xx/VX900"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the VIA
 	  VT82C596 and later SMBus interface.  Specifically, the following
@@ -885,6 +885,7 @@ config I2C_NPCM
 
 config I2C_OCORES
 	tristate "OpenCores I2C Controller"
+	depends on HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the
 	  OpenCores I2C controller. For details see
@@ -1397,6 +1398,7 @@ config I2C_ICY
 config I2C_MLXCPLD
 	tristate "Mellanox I2C driver"
 	depends on X86_64 || (ARM64 && ACPI) || COMPILE_TEST
+	depends on HAS_IOPORT
 	help
 	  This exposes the Mellanox platform I2C busses to the linux I2C layer
 	  for X86 and ARM64/ACPI based systems.
Signature · 1 line
2.40.1
Reviewed-by on v2 1/1
#2 lore raw

Re: [PATCH v2 1/1] i2c: add HAS_IOPORT dependencies

Quoted 7 lines · Niklas Schnelle

In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at compile time. We thus need to add HAS_IOPORT as dependency for those drivers using them.

#3 lore raw

Re: [PATCH v2 1/1] i2c: add HAS_IOPORT dependencies

In reply to Niklas Schnelle

Hi Niklas,

Quoted 7 lines · Niklas Schnelle

In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at compile time. We thus need to add HAS_IOPORT as dependency for those drivers using them.

Quoted 7 lines

---
Note: This patch does not depend any not-yet-mainline HAS_IOPORT changes and may be merged via subsystem specific trees at your earliest convenience.

v1 - v2:
- Removed HAS_IOPORT dependency for I2C_PARPORT

Thanks for your patch, which is now commit 53f44c1005ba6421 ("i2c: add HAS_IOPORT dependencies") in i2c-host/i2c/i2c-host (next-20240408).

drivers/i2c/busses/Kconfig config I2C_NPCM · line 888

Quoted 7 lines
drivers/i2c/busses/Kconfig +1 -0
@@ -885,6 +885,7 @@ config I2C_NPCM
 
 config I2C_OCORES
        tristate "OpenCores I2C Controller"
+       depends on HAS_IOPORT

This restricts the driver to platforms that select HAS_IOPORT, while the driver supports both MMIO and IOPORT.

At least for arch/xtensa/configs/audio_kc705_defconfig:CONFIG_I2C_OCORES=y the HAS_IOPORT dependency does not seem to be met.

I think the IOPORT part in i2c-ocores.c should be protected by "#ifdef HAS_IOPORT" first, so the driver can still be built on platforms that do not support IOPORT.

drivers/i2c/busses/Kconfig config I2C_NPCM · line 891

Quoted 3 lines
drivers/i2c/busses/Kconfig +0 -0
        help
          If you say yes to this option, support will be included for the
          OpenCores I2C controller. For details see

Gr{oetje,eeting}s,

Geert

Signature · 5 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
#4 lore raw

Re: [PATCH v2 1/1] i2c: add HAS_IOPORT dependencies

Quoted 32 lines · Geert Uytterhoeven

Hi Niklas,

Quoted 7 lines · Niklas Schnelle

In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at compile time. We thus need to add HAS_IOPORT as dependency for those drivers using them.

Quoted 7 lines

---
Note: This patch does not depend any not-yet-mainline HAS_IOPORT changes and may be merged via subsystem specific trees at your earliest convenience.

v1 - v2:
- Removed HAS_IOPORT dependency for I2C_PARPORT

Thanks for your patch, which is now commit 53f44c1005ba6421 ("i2c: add HAS_IOPORT dependencies") in i2c-host/i2c/i2c-host (next-20240408).

drivers/i2c/busses/Kconfig config I2C_NPCM · line 888

Quoted 7 lines
drivers/i2c/busses/Kconfig +1 -0
@@ -885,6 +885,7 @@ config I2C_NPCM
 
 config I2C_OCORES
        tristate "OpenCores I2C Controller"
+       depends on HAS_IOPORT

This restricts the driver to platforms that select HAS_IOPORT, while the driver supports both MMIO and IOPORT.

Quoted 7 lines

At least for arch/xtensa/configs/audio_kc705_defconfig:CONFIG_I2C_OCORES=y the HAS_IOPORT dependency does not seem to be met.

I think the IOPORT part in i2c-ocores.c should be protected by "#ifdef HAS_IOPORT" first, so the driver can still be built on platforms that do not support IOPORT.

Good catch! I sent a fixup for this driver now.

Arnd

maintainer Applied
#5 lore raw
In reply to Niklas Schnelle

Hi

Quoted 10 lines · Niklas Schnelle

This is a follow up in my ongoing effort of making inb()/outb() and similar I/O port accessors compile-time optional. Previously I sent this as a treewide series titled "treewide: Remove I/O port accessors for HAS_IOPORT=n" with the latest being its 5th version[0]. With a significant subset of patches merged I've changed over to per-subsystem series. These series are stand alone and should be merged via the relevant tree such that with all subsystems complete we can follow this up with the final patch that will make the I/O port accessors compile-time optional.

[...]

Applied to i2c/i2c-host on

git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux.git

Thank you,
Andi

Patches applied
===============
[1/1] i2c: add HAS_IOPORT dependencies

      commit: 53f44c1005ba64215ab6c3c5bbbcaef0870ae7d6