doc/netlink/specs: Add bond support to rt_link.yaml
Subsystems (3)
PATCH 1/1 doc/netlink/specs: Add bond support to rt_link.yaml
Add bond support to rt_link.yaml. Here is an example output:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/rt_link.yaml \
--do getlink --json '{"ifname": "bond0"}' --output-json | jq '.linkinfo'
{
"kind": "bond",
"data": {
"mode": 4,
"miimon": 100,
...
"arp-interval": 0,
"arp-ip-target": [
"192.168.1.1",
"192.168.1.2"
],
"arp-validate": 0,
"arp-all-targets": 0,
"ns-ip6-target": [
"2001::1",
"2001::2"
],
"primary-reselect": 0,
...
"missed-max": 2,
"ad-info": {
"aggregator": 1,
"num-ports": 1,
"actor-key": 0,
"partner-key": 1,
"partner-mac": "00:00:00:00:00:00"
}
}
}And here is the downlink info.
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/rt_link.yaml \
--do getlink --json '{"ifname": "dummy0"}' --output-json | jq '.linkinfo'
{
"kind": "dummy",
"slave-kind": "bond",
"slave-data": {
"state": 0,
"mii-status": 0,
"link-failure-count": 0,
"perm-hwaddr": "f2:82:f7:cc:47:13",
"queue-id": 0,
"prio": 0
}
}Signed-off-by Hangbin Liu <[email protected]>
--- Documentation/netlink/specs/rt_link.yaml | 163 +++++++++++++++++++++++ 1 file changed, 163 insertions(+)
Documentation/netlink/specs/rt_link.yaml +163 -0
@@ -1035,6 +1035,165 @@ attribute-sets: type: sub-message sub-message: linkinfo-member-data-msg selector: slave-kind + - + name: linkinfo-bond-attrs + name-prefix: ifla-bond- + attributes: + - + name: mode + type: u8 + - + name: active-slave + type: u32 + - + name: miimon + type: u32 + - + name: updelay + type: u32 + - + name: downdelay + type: u32 + - + name: use-carrier + type: u8 + - + name: arp-interval + type: u32 + - + name: arp-ip-target + type: indexed-array + sub-type: u32 + byte-order: big-endian + display-hint: ipv4 + - + name: arp-validate + type: u32 + - + name: arp-all-targets + type: u32 + - + name: primary + type: u32 + - + name: primary-reselect + type: u8 + - + name: fail-over-mac + type: u8 + - + name: xmit-hash-policy + type: u8 + - + name: resend-igmp + type: u32 + - + name: num-peer-notif + type: u8 + - + name: all-slaves-active + type: u8 + - + name: min-links + type: u32 + - + name: lp-interval + type: u32 + - + name: packets-per-slave + type: u32 + - + name: ad-lacp-rate + type: u8 + - + name: ad-select + type: u8 + - + name: ad-info + type: nest + nested-attributes: bond-ad-info-attrs + - + name: ad-actor-sys-prio + type: u16 + - + name: ad-user-port-key + type: u16 + - + name: ad-actor-system + type: binary + display-hint: mac + - + name: tlb-dynamic-lb + type: u8 + - + name: peer-notif-delay + type: u32 + - + name: ad-lacp-active + type: u8 + - + name: missed-max + type: u8 + - + name: ns-ip6-target + type: indexed-array + sub-type: binary + display-hint: ipv6 + - + name: coupled-control + type: u8 + - + name: bond-ad-info-attrs + name-prefix: ifla-bond-ad-info- + attributes: + - + name: aggregator + type: u16 + - + name: num-ports + type: u16 + - + name: actor-key + type: u16 + - + name: partner-key + type: u16 + - + name: partner-mac + type: binary + display-hint: mac + - + name: bond-slave-attrs + name-prefix: ifla-bond-slave- + attributes: + - + name: state + type: u8 + - + name: mii-status + type: u8 + - + name: link-failure-count + type: u32 + - + name: perm-hwaddr + type: binary + display-hint: mac + - + name: queue-id + type: u16 + - + name: ad-aggregator-id + type: u16 + - + name: ad-actor-oper-port-state + type: u8 + - + name: ad-partner-oper-port-state + type: u16 + - + name: prio + type: u32 - name: linkinfo-bridge-attrs name-prefix: ifla-br-
@@ -1716,6 +1875,9 @@ sub-messages: - name: linkinfo-data-msg formats: + - + value: bond + attribute-set: linkinfo-bond-attrs - value: bridge attribute-set: linkinfo-bridge-attrs
@@ -1754,6 +1916,7 @@ sub-messages: attribute-set: linkinfo-brport-attrs - value: bond + attribute-set: bond-slave-attrs operations: enum-model: directional
Signature · 1 line
2.43.0
This patch was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:
Hello:
This patch was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:
Quoted 34 lines · On Tue, 9 Apr 2024 16:35:04 +0800 you wrote:
Add bond support to
rt_link.yaml. Here is an example output:$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/rt_link.yaml \ --do getlink --json '{"ifname": "bond0"}' --output-json | jq '.linkinfo' { "kind": "bond", "data": { "mode": 4, "miimon": 100, ... "arp-interval": 0, "arp-ip-target": [ "192.168.1.1", "192.168.1.2" ], "arp-validate": 0, "arp-all-targets": 0, "ns-ip6-target": [ "2001::1", "2001::2" ], "primary-reselect": 0, ... "missed-max": 2, "ad-info": { "aggregator": 1, "num-ports": 1, "actor-key": 0, "partner-key": 1, "partner-mac": "00:00:00:00:00:00" } } }
Quoted 1 line
[...]
Here is the summary with links:
- [net-next] doc/netlink/specs: Add bond support to rt_link.yaml
https://git.kernel.org/netdev/net-next/c/4ede457542a6
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html