ASoC: nau8822: add MCLK support
cover ASoC: nau8822: add MCLK support
From: Andrejs Cainikovs <[email protected]>
This change adds local MCLK handling, which would cover a case when a reference audio clock is present in a system, but is not allowed to be changed, see [1].
[1]: https://lore.kernel.org/all/[email protected]/
Andrejs Cainikovs (2):
ASoC: nau8822: move nau8822_set_dai_sysclk()
ASoC: nau8822: add MCLK support
sound/soc/codecs/nau8822.c | 69 ++++++++++++++++++++++++++++---------- sound/soc/codecs/nau8822.h | 1 + 2 files changed, 53 insertions(+), 17 deletions(-)
Signature · 1 line
2.34.1
PATCH 1/2 ASoC: nau8822: move nau8822_set_dai_sysclk()
From: Andrejs Cainikovs <[email protected]>
Next commit in series makes a change which calls nau8822_set_pll() from nau8822_set_dai_sysclk(). Moving latter after the former would avoid a forward declaration, and this is exactly what this change does.
--- sound/soc/codecs/nau8822.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-)
sound/soc/codecs/nau8822.c +14 -14
@@ -612,20 +612,6 @@ static const struct snd_soc_dapm_route nau8822_dapm_routes[] = { {"Right DAC", NULL, "Digital Loopback"}, }; -static int nau8822_set_dai_sysclk (struct snd_soc_dai *dai,int clk_id, -unsigned int freq,int dir) -{ -struct snd_soc_component *component = dai->component; -struct nau8822 *nau8822 =snd_soc_component_get_drvdata (component); - - nau8822->div_id = clk_id; - nau8822->sysclk = freq; -dev_dbg (component->dev,"master sysclk %dHz, source %s\n" , freq, - clk_id ==NAU8822_CLK_PLL ?"PLL" :"MCLK" ); - -return 0 ; -} -static int nau8822_calc_pll (unsigned int pll_in,unsigned int fs,struct nau8822_pll *pll_param) {
@@ -782,6 +768,20 @@ static int nau8822_set_pll(struct snd_soc_dai *dai, int pll_id, int source,return 0 ; } +static int nau8822_set_dai_sysclk (struct snd_soc_dai *dai,int clk_id, +unsigned int freq,int dir) +{ +struct snd_soc_component *component = dai->component; +struct nau8822 *nau8822 =snd_soc_component_get_drvdata (component); + + nau8822->div_id = clk_id; + nau8822->sysclk = freq; +dev_dbg (component->dev,"master sysclk %dHz, source %s\n" , freq, + clk_id ==NAU8822_CLK_PLL ?"PLL" :"MCLK" ); + +return 0 ; +} +static int nau8822_set_dai_fmt (struct snd_soc_dai *dai,unsigned int fmt) {struct snd_soc_component *component = dai->component;
Signature · 1 line
2.34.1
PATCH 2/2 ASoC: nau8822: add MCLK support
In reply to Andrejs CainikovsFrom: Andrejs Cainikovs <[email protected]>
This change adds MCLK clock handling directly within driver. When used in combination with simple-audio-card, and mclk-fs is set, simple-audio-card will change MCLK frequency before configuring PLL. In some cases, however, MCLK reference clock should be static (see [1]), which means it needs to be moved away from simple-audio-card.
[1]: https://lore.kernel.org/all/[email protected]/
--- sound/soc/codecs/nau8822.c | 43 ++++++++++++++++++++++++++++++++++---- sound/soc/codecs/nau8822.h | 1 + 2 files changed, 40 insertions(+), 4 deletions(-)
sound/soc/codecs/nau8822.c +39 -4
@@ -14,6 +14,7 @@#include <linux/moduleparam.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/clk.h> #include <linux/delay.h> #include <linux/pm.h> #include <linux/i2c.h>
@@ -773,11 +774,26 @@ static int nau8822_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id, {struct snd_soc_component *component = dai->component;struct nau8822 *nau8822 =snd_soc_component_get_drvdata (component); +unsigned long mclk_freq; nau8822->div_id = clk_id; nau8822->sysclk = freq; + +if (nau8822->mclk) { + mclk_freq =clk_get_rate (nau8822->mclk); +if (mclk_freq != freq) { +int ret =nau8822_set_pll (dai,NAU8822_CLK_MCLK , +NAU8822_CLK_MCLK , mclk_freq, freq); +if (ret) { +dev_err (component->dev,"Failed to set PLL\n" ); +return ret; + } + nau8822->div_id =NAU8822_CLK_PLL ; + } + } +dev_dbg (component->dev,"master sysclk %dHz, source %s\n" , freq, - clk_id ==NAU8822_CLK_PLL ?"PLL" :"MCLK" ); + nau8822->div_id ==NAU8822_CLK_PLL ?"PLL" :"MCLK" );return 0 ; }
@@ -848,7 +864,7 @@ static int nau8822_hw_params(struct snd_pcm_substream *substream, {struct snd_soc_component *component = dai->component;struct nau8822 *nau8822 =snd_soc_component_get_drvdata (component); -int val_len =0 , val_rate =0 ; +int div =0 , val_len =0 , val_rate =0 ;unsigned int ctrl_val, bclk_fs, bclk_div;/* make BCLK and LRC divide configuration if the codec as master. */
@@ -915,8 +931,10 @@ static int nau8822_hw_params(struct snd_pcm_substream *substream,/* If the master clock is from MCLK, provide the runtime FS for driver * to get the master clock prescaler configuration. */ -if (nau8822->div_id ==NAU8822_CLK_MCLK ) -nau8822_config_clkdiv (dai,0 ,params_rate (params)); +if (nau8822->div_id !=NAU8822_CLK_MCLK ) + div = nau8822->pll.mclk_scaler; + +nau8822_config_clkdiv (dai, div,params_rate (params));return 0 ; }
@@ -940,12 +958,23 @@ static int nau8822_mute(struct snd_soc_dai *dai, int mute, int direction)static int nau8822_set_bias_level (struct snd_soc_component *component,enum snd_soc_bias_level level) { +struct nau8822 *nau8822 =snd_soc_component_get_drvdata (component); +switch (level) {case SND_SOC_BIAS_ON :case SND_SOC_BIAS_PREPARE :snd_soc_component_update_bits (component,NAU8822_REG_POWER_MANAGEMENT_1 ,NAU8822_REFIMP_MASK ,NAU8822_REFIMP_80K ); +if (nau8822->mclk) { +int ret =clk_prepare_enable (nau8822->mclk); + +if (ret) { +dev_err (component->dev, +"Failed to enable MCLK: %d\n" , ret); +return ret; + } + }break ;case SND_SOC_BIAS_STANDBY :
@@ -973,6 +1002,7 @@ static int nau8822_set_bias_level(struct snd_soc_component *component, NAU8822_REG_POWER_MANAGEMENT_2, 0);snd_soc_component_write (component,NAU8822_REG_POWER_MANAGEMENT_3 ,0 ); +clk_disable_unprepare (nau8822->mclk);break ; }
@@ -1125,6 +1155,11 @@ static int nau8822_i2c_probe(struct i2c_client *i2c) }i2c_set_clientdata (i2c, nau8822); + nau8822->mclk =devm_clk_get_optional (&i2c->dev,"mclk" ); +if (IS_ERR (nau8822->mclk)) +return dev_err_probe (&i2c->dev,PTR_ERR (nau8822->mclk), +"Error getting mclk\n" ); + nau8822->regmap =devm_regmap_init_i2c (i2c, &nau8822_regmap_config);if (IS_ERR (nau8822->regmap)) { ret =PTR_ERR (nau8822->regmap);
sound/soc/codecs/nau8822.h +1 -0
@@ -215,6 +215,7 @@ struct nau8822_pll {struct nau8822 {struct device *dev;struct regmap *regmap; +struct clk *mclk;struct nau8822_pll pll;int sysclk;int div_id;
Signature · 1 line
2.34.1
Hello,
Quoted 9 lines · Andrejs Cainikovs
From: Andrejs Cainikovs <[email protected]>
This change adds MCLK clock handling directly within driver. When used in combination with simple-audio-card, and mclk-fs is set, simple-audio-card will change MCLK frequency before configuring PLL. In some cases, however, MCLK reference clock should be static (see [1]), which means it needs to be moved away from simple-audio-card.
This seems buggy, it introduces the following error:
[ 8490.005519] ------------[ cut here ]------------ [ 8490.005527] audio_refclk:clk:157:10 already disabled [ 8490.005585] WARNING: CPU: 0 PID: 858 at drivers/clk/clk.c:1038 clk_core_disable+0xb0/0xb8 [ 8490.005623] Modules linked in: 8021q garp stp mrp llc rfcomm af_alg usb_f_ncm u_ether ti_k3_r5_remoteproc virtio_rpmsg_bus btnxpuart rpmsg_ns rtc_ti_k3 ti_k3_m4_remoteproc ti_k3_common mwifiex_sdio mwifiex cfg80211 bluetooth ecdh_generic ecc tidss snd_soc_davinci_mcasp rfkill snd_soc_ti_udma snd_soc_ti_edma sa2ul drm_dma_helper snd_soc_ti_sdma mcrc ina2xx lontium_lt8916 [ 8490.005857] CPU: 0 PID: 858 Comm: rtcwake Tainted: G W 6.1.80-15754-g2d31b2cc742b-dirty #38 [ 8490.005868] Hardware name: Toradex Verdin AM62 WB on Verdin Development Board (DT) [ 8490.005876] pstate: 400000c5 (nZcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 8490.005886] pc : clk_core_disable+0xb0/0xb8 [ 8490.005897] lr : clk_core_disable+0xb0/0xb8 [ 8490.005907] sp : ffff80000a5a3960 [ 8490.005911] x29: ffff80000a5a3960 x28: ffff800009246000 x27: ffff800008df4690 [ 8490.005926] x26: ffff8000091dbcc0 x25: ffff800008df4000 x24: ffff8000091dbc18 [ 8490.005941] x23: ffff000002de5080 x22: 0000000000000000 x21: ffff000002f5fc80 [ 8490.005955] x20: ffff00000118df00 x19: ffff00000118df00 x18: ffff800000d15000 [ 8490.005970] x17: 0000000000000000 x16: 0000000000000000 x15: ffff00000605aac0 [ 8490.005984] x14: fffffffffffca828 x13: 0a64656c62617369 x12: 642079646165726c [ 8490.005997] x11: 656820747563205b x10: 2d2d2d2d2d2d2d2d x9 : 00000000fffffffe [ 8490.006012] x8 : ffff8000090c1260 x7 : ffff80000a5a3760 x6 : 00000000fffff267 [ 8490.006026] x5 : ffff00001da1ab60 x4 : 0000000000000000 x3 : 0000000000000027 [ 8490.006039] x2 : ffff00001da1ab68 x1 : ae3ede0e49d60900 x0 : 0000000000000000 [ 8490.006055] Call trace: [ 8490.006060] clk_core_disable+0xb0/0xb8 [ 8490.006072] clk_core_disable_lock+0x24/0x40 [ 8490.006082] clk_disable+0x20/0x30 [ 8490.006093] nau8822_set_bias_level+0x68/0x1a0 [snd_soc_nau8822] [ 8490.006123] snd_soc_component_set_bias_level+0x28/0x78 [ 8490.006136] snd_soc_dapm_force_bias_level+0x24/0x40 [ 8490.006149] nau8822_suspend+0x28/0x48 [snd_soc_nau8822] [ 8490.006167] snd_soc_component_suspend+0x24/0x40 [ 8490.006176] snd_soc_suspend+0x1bc/0x218 [ 8490.006185] platform_pm_suspend+0x2c/0x78 [ 8490.006198] dpm_run_callback+0x3c/0x88 [ 8490.006209] __device_suspend+0x110/0x3b0 [ 8490.006219] dpm_suspend+0x100/0x200 [ 8490.006228] dpm_suspend_start+0x80/0xa0 [ 8490.006238] suspend_devices_and_enter+0xc8/0x4e8 [ 8490.006252] pm_suspend+0x1f8/0x268 [ 8490.006261] state_store+0x8c/0x118 [ 8490.006270] kobj_attr_store+0x18/0x30 [ 8490.006287] sysfs_kf_write+0x44/0x58 [ 8490.006297] kernfs_fop_write_iter+0x118/0x1a8 [ 8490.006310] vfs_write+0x33c/0x438 [ 8490.006320] ksys_write+0x6c/0xf8 [ 8490.006327] __arm64_sys_write+0x1c/0x28 [ 8490.006335] invoke_syscall+0x44/0x108 [ 8490.006348] el0_svc_common.constprop.0+0xcc/0xf0 [ 8490.006358] do_el0_svc+0x1c/0x28 [ 8490.006367] el0_svc+0x28/0x98 [ 8490.006377] el0t_64_sync_handler+0xb8/0xc0 [ 8490.006386] el0t_64_sync+0x18c/0x190 [ 8490.006397] ---[ end trace 0000000000000000 ]--- [ 8490.006407] ------------[ cut here ]------------ [ 8490.006410] audio_refclk:clk:157:10 already unprepared [ 8490.006447] WARNING: CPU: 0 PID: 858 at drivers/clk/clk.c:897 clk_core_unprepare+0xf0/0x110 [ 8490.006463] Modules linked in: 8021q garp stp mrp llc rfcomm af_alg usb_f_ncm u_ether ti_k3_r5_remoteproc virtio_rpmsg_bus btnxpuart rpmsg_ns rtc_ti_k3 ti_k3_m4_remoteproc ti_k3_common mwifiex_sdio mwifiex cfg80211 bluetooth ecdh_generic ecc tidss snd_soc_davinci_mcasp rfkill snd_soc_ti_udma snd_soc_ti_edma sa2ul drm_dma_helper snd_soc_ti_sdma mcrc ina2xx lontium_lt8916 [ 8490.006644] CPU: 0 PID: 858 Comm: rtcwake Tainted: G W 6.1.80-15754-g2d31b2cc742b-dirty #38 [ 8490.006653] Hardware name: Toradex Verdin AM62 WB on Verdin Development Board (DT) [ 8490.006658] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 8490.006667] pc : clk_core_unprepare+0xf0/0x110 [ 8490.006678] lr : clk_core_unprepare+0xf0/0x110 [ 8490.006688] sp : ffff80000a5a3970 [ 8490.006691] x29: ffff80000a5a3970 x28: ffff800009246000 x27: ffff800008df4690 [ 8490.006706] x26: ffff8000091dbcc0 x25: ffff800008df4000 x24: ffff8000091dbc18 [ 8490.006720] x23: ffff000002de5080 x22: 0000000000000000 x21: ffff000002f5fc80 [ 8490.006735] x20: 0000000000000000 x19: ffff00000118df00 x18: ffff800000d15000 [ 8490.006749] x17: 0000000000000000 x16: 0000000000000000 x15: ffff00000605aac0 [ 8490.006763] x14: fffffffffffcb568 x13: 0a64657261706572 x12: 706e752079646165 [ 8490.006777] x11: 656820747563205b x10: 2d2d2d2d2d2d2d2d x9 : 00000000fffffffe [ 8490.006791] x8 : ffff8000090c1260 x7 : ffff80000a5a3770 x6 : 00000000fffff29a [ 8490.006805] x5 : ffff00001da1ab60 x4 : 0000000000000000 x3 : 0000000000000027 [ 8490.006819] x2 : ffff00001da1ab68 x1 : ae3ede0e49d60900 x0 : 0000000000000000 [ 8490.006833] Call trace: [ 8490.006836] clk_core_unprepare+0xf0/0x110 [ 8490.006847] clk_unprepare+0x2c/0x48 [ 8490.006855] nau8822_set_bias_level+0x70/0x1a0 [snd_soc_nau8822] [ 8490.006874] snd_soc_component_set_bias_level+0x28/0x78 [ 8490.006883] snd_soc_dapm_force_bias_level+0x24/0x40 [ 8490.006893] nau8822_suspend+0x28/0x48 [snd_soc_nau8822] [ 8490.006913] snd_soc_component_suspend+0x24/0x40 [ 8490.006921] snd_soc_suspend+0x1bc/0x218 [ 8490.006929] platform_pm_suspend+0x2c/0x78 [ 8490.006939] dpm_run_callback+0x3c/0x88 [ 8490.006948] __device_suspend+0x110/0x3b0 [ 8490.006957] dpm_suspend+0x100/0x200 [ 8490.006967] dpm_suspend_start+0x80/0xa0 [ 8490.006976] suspend_devices_and_enter+0xc8/0x4e8 [ 8490.006986] pm_suspend+0x1f8/0x268 [ 8490.006994] state_store+0x8c/0x118 [ 8490.007003] kobj_attr_store+0x18/0x30 [ 8490.007014] sysfs_kf_write+0x44/0x58 [ 8490.007022] kernfs_fop_write_iter+0x118/0x1a8 [ 8490.007033] vfs_write+0x33c/0x438 [ 8490.007041] ksys_write+0x6c/0xf8 [ 8490.007047] __arm64_sys_write+0x1c/0x28 [ 8490.007055] invoke_syscall+0x44/0x108 [ 8490.007064] el0_svc_common.constprop.0+0xcc/0xf0 [ 8490.007074] do_el0_svc+0x1c/0x28 [ 8490.007083] el0_svc+0x28/0x98 [ 8490.007091] el0t_64_sync_handler+0xb8/0xc0 [ 8490.007100] el0t_64_sync+0x18c/0x190 [ 8490.007108] ---[ end trace 0000000000000000 ]---
Francesco