Skip to contentSkip to conversation

Intel On Demand changes

PATCH In review David E. Box 4 participants 15 messages Apr 11, 2024 – Apr 15, 2024

Subsystems (2)
lore
Share & tools
lore

David E. Box

author maintainer
#0 lore raw

v4 cover Intel On Demand changes

Adds driver and tool support for a new "current" meter that allows reading the most current, but not attested, value of the meter counters. Also adds fixes for the intel_sdsi tool.

David E. Box (8):
platform/x86/intel/sdsi: Set message size during writes platform/x86/intel/sdsi: Combine read and write mailbox flows platform/x86/intel/sdsi: Add attribute to read the current meter state tools/arch/x86/intel_sdsi: Fix maximum meter bundle length tools/arch/x86/intel_sdsi: Fix meter_show display tools/arch/x86/intel_sdsi: Fix meter_certificate decoding platform/x86/intel/sdsi: Simplify ascii printing
tools: intel_sdsi: Add current meter support

Kuppuswamy Sathyanarayanan (1):
platform/x86/intel/sdsi: Add in-band BIOS lock support

 drivers/platform/x86/intel/sdsi.c      | 118 ++++++++++++++++---------
 tools/arch/x86/intel_sdsi/intel_sdsi.c | 108 +++++++++++++---------
 2 files changed, 144 insertions(+), 82 deletions(-)

base-commit: 4cece764965020c22cff7665b18a012006359095

Signature · 1 line
2.34.1
author maintainer
#1 lore raw

PATCH v4 1/9 platform/x86/intel/sdsi: Set message size during writes

New mailbox commands will support sending multi packet writes and updated firmware now requires that the message size be written for all commands along with the packet size. Since the driver doesn't perform writes larger than the packet size, set the message size to the same value.

---

V4 - no changes
V3 - no changes
V2 - no changes

 drivers/platform/x86/intel/sdsi.c | 1 +
 1 file changed, 1 insertion(+)
drivers/platform/x86/intel/sdsi.c +1 -0
index 556e7c6dbb05..a70c071de6e2 100644
@@ -252,6 +252,7 @@ static int sdsi_mbox_cmd_write(struct sdsi_priv *priv, struct sdsi_mbox_info *in
 		  FIELD_PREP(CTRL_SOM, 1) |
 		  FIELD_PREP(CTRL_RUN_BUSY, 1) |
 		  FIELD_PREP(CTRL_READ_WRITE, 1) |
+		  FIELD_PREP(CTRL_MSG_SIZE, info->size) |
 		  FIELD_PREP(CTRL_PACKET_SIZE, info->size);
 	writeq(control, priv->control_addr);
 
Signature · 1 line
2.34.1
Reviewed-by on v4 1/9
#2 lore raw

Re: [PATCH V4 1/9] platform/x86/intel/sdsi: Set message size during writes

Quoted 8 lines · David E. Box

New mailbox commands will support sending multi packet writes and updated firmware now requires that the message size be written for all commands along with the packet size. Since the driver doesn't perform writes larger than the packet size, set the message size to the same value.

---

Quoted 20 lines

V4 - no changes
V3 - no changes
V2 - no changes

 drivers/platform/x86/intel/sdsi.c | 1 +
 1 file changed, 1 insertion(+)
drivers/platform/x86/intel/sdsi.c +1 -0
index 556e7c6dbb05..a70c071de6e2 100644
@@ -252,6 +252,7 @@ static int sdsi_mbox_cmd_write(struct sdsi_priv *priv, struct sdsi_mbox_info *in
 		  FIELD_PREP(CTRL_SOM, 1) |
 		  FIELD_PREP(CTRL_RUN_BUSY, 1) |
 		  FIELD_PREP(CTRL_READ_WRITE, 1) |
+		  FIELD_PREP(CTRL_MSG_SIZE, info->size) |
 		  FIELD_PREP(CTRL_PACKET_SIZE, info->size);
 	writeq(control, priv->control_addr);
 
Signature · 2 lines
Sathyanarayanan Kuppuswamy
Linux Kernel Developer
author maintainer
#3 lore raw

PATCH v4 2/9 platform/x86/intel/sdsi: Combine read and write mailbox flows

In reply to David E. Box

The current mailbox commands are either read-only or write-only and the flow is different for each. New commands will need to send and receive data. In preparation for these commands, create a common polling function to handle sending data and receiving in the same transaction.

---
V4 - no changes

V3 - no changes

V2 - In sdsi_cmd_read() remove unnecessary check for non-zero packet_size
in do loop since the loop is exited earlier when packet_size is zero.

 drivers/platform/x86/intel/sdsi.c | 79 +++++++++++++++++--------------
 1 file changed, 44 insertions(+), 35 deletions(-)
drivers/platform/x86/intel/sdsi.c +44 -35
index a70c071de6e2..d80c2dc0ce71 100644
@@ -15,6 +15,7 @@
 #include <linux/iopoll.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/overflow.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
 #include <linux/sysfs.h>
@@ -156,8 +157,8 @@ static int sdsi_status_to_errno(u32 status)
 	}
 }
 
-static int sdsi_mbox_cmd_read(struct sdsi_priv *priv, struct sdsi_mbox_info *info,
-			      size_t *data_size)
+static int sdsi_mbox_poll(struct sdsi_priv *priv, struct sdsi_mbox_info *info,
+			  size_t *data_size)
 {
 	struct device *dev = priv->dev;
 	u32 total, loop, eom, status, message_size;
@@ -166,18 +167,10 @@ static int sdsi_mbox_cmd_read(struct sdsi_priv *priv, struct sdsi_mbox_info *inf
 
 	lockdep_assert_held(&priv->mb_lock);
 
-	/* Format and send the read command */
-	control = FIELD_PREP(CTRL_EOM, 1) |
-		  FIELD_PREP(CTRL_SOM, 1) |
-		  FIELD_PREP(CTRL_RUN_BUSY, 1) |
-		  FIELD_PREP(CTRL_PACKET_SIZE, info->size);
-	writeq(control, priv->control_addr);
-
 	/* For reads, data sizes that are larger than the mailbox size are read in packets. */
 	total = 0;
 	loop = 0;
 	do {
-		void *buf = info->buffer + (SDSI_SIZE_MAILBOX * loop);
 		u32 packet_size;
 
 		/* Poll on ready bit */
@@ -195,6 +188,11 @@ static int sdsi_mbox_cmd_read(struct sdsi_priv *priv, struct sdsi_mbox_info *inf
 		if (ret)
 			break;
 
+		if (!packet_size) {
+			sdsi_complete_transaction(priv);
+			break;
+		}
+
 		/* Only the last packet can be less than the mailbox size. */
 		if (!eom && packet_size != SDSI_SIZE_MAILBOX) {
 			dev_err(dev, "Invalid packet size\n");
@@ -208,9 +206,13 @@ static int sdsi_mbox_cmd_read(struct sdsi_priv *priv, struct sdsi_mbox_info *inf
 			break;
 		}
 
-		sdsi_memcpy64_fromio(buf, priv->mbox_addr, round_up(packet_size, SDSI_SIZE_CMD));
+		if (info->buffer) {
+			void *buf = info->buffer + array_size(SDSI_SIZE_MAILBOX, loop);
 
-		total += packet_size;
+			sdsi_memcpy64_fromio(buf, priv->mbox_addr,
+					     round_up(packet_size, SDSI_SIZE_CMD));
+			total += packet_size;
+		}
 
 		sdsi_complete_transaction(priv);
 	} while (!eom && ++loop < MBOX_MAX_PACKETS);
@@ -230,16 +232,33 @@ static int sdsi_mbox_cmd_read(struct sdsi_priv *priv, struct sdsi_mbox_info *inf
 		dev_warn(dev, "Read count %u differs from expected count %u\n",
 			 total, message_size);
 
-	*data_size = total;
+	if (data_size)
+		*data_size = total;
 
 	return 0;
 }
 
-static int sdsi_mbox_cmd_write(struct sdsi_priv *priv, struct sdsi_mbox_info *info)
+static int sdsi_mbox_cmd_read(struct sdsi_priv *priv, struct sdsi_mbox_info *info,
+			      size_t *data_size)
+{
+	u64 control;
+
+	lockdep_assert_held(&priv->mb_lock);
+
+	/* Format and send the read command */
+	control = FIELD_PREP(CTRL_EOM, 1) |
+		  FIELD_PREP(CTRL_SOM, 1) |
+		  FIELD_PREP(CTRL_RUN_BUSY, 1) |
+		  FIELD_PREP(CTRL_PACKET_SIZE, info->size);
+	writeq(control, priv->control_addr);
+
+	return sdsi_mbox_poll(priv, info, data_size);
+}
+
+static int sdsi_mbox_cmd_write(struct sdsi_priv *priv, struct sdsi_mbox_info *info,
+			       size_t *data_size)
 {
 	u64 control;
-	u32 status;
-	int ret;
 
 	lockdep_assert_held(&priv->mb_lock);
 
@@ -256,20 +275,7 @@ static int sdsi_mbox_cmd_write(struct sdsi_priv *priv, struct sdsi_mbox_info *in
 		  FIELD_PREP(CTRL_PACKET_SIZE, info->size);
 	writeq(control, priv->control_addr);
 
-	/* Poll on ready bit */
-	ret = readq_poll_timeout(priv->control_addr, control, control & CTRL_READY,
-				 MBOX_POLLING_PERIOD_US, MBOX_TIMEOUT_US);
-
-	if (ret)
-		goto release_mbox;
-
-	status = FIELD_GET(CTRL_STATUS, control);
-	ret = sdsi_status_to_errno(status);
-
-release_mbox:
-	sdsi_complete_transaction(priv);
-
-	return ret;
+	return sdsi_mbox_poll(priv, info, data_size);
 }
 
 static int sdsi_mbox_acquire(struct sdsi_priv *priv, struct sdsi_mbox_info *info)
@@ -313,7 +319,8 @@ static int sdsi_mbox_acquire(struct sdsi_priv *priv, struct sdsi_mbox_info *info
 	return ret;
 }
 
-static int sdsi_mbox_write(struct sdsi_priv *priv, struct sdsi_mbox_info *info)
+static int sdsi_mbox_write(struct sdsi_priv *priv, struct sdsi_mbox_info *info,
+			   size_t *data_size)
 {
 	int ret;
 
@@ -323,7 +330,7 @@ static int sdsi_mbox_write(struct sdsi_priv *priv, struct sdsi_mbox_info *info)
 	if (ret)
 		return ret;
 
-	return sdsi_mbox_cmd_write(priv, info);
+	return sdsi_mbox_cmd_write(priv, info, data_size);
 }
 
 static int sdsi_mbox_read(struct sdsi_priv *priv, struct sdsi_mbox_info *info, size_t *data_size)
@@ -342,7 +349,7 @@ static int sdsi_mbox_read(struct sdsi_priv *priv, struct sdsi_mbox_info *info, s
 static ssize_t sdsi_provision(struct sdsi_priv *priv, char *buf, size_t count,
 			      enum sdsi_command command)
 {
-	struct sdsi_mbox_info info;
+	struct sdsi_mbox_info info = {};
 	int ret;
 
 	if (count > (SDSI_SIZE_WRITE_MSG - SDSI_SIZE_CMD))
@@ -364,7 +371,9 @@ static ssize_t sdsi_provision(struct sdsi_priv *priv, char *buf, size_t count,
 	ret = mutex_lock_interruptible(&priv->mb_lock);
 	if (ret)
 		goto free_payload;
-	ret = sdsi_mbox_write(priv, &info);
+
+	ret = sdsi_mbox_write(priv, &info, NULL);
+
 	mutex_unlock(&priv->mb_lock);
 
 free_payload:
@@ -408,7 +417,7 @@ static ssize_t
 certificate_read(u64 command, struct sdsi_priv *priv, char *buf, loff_t off,
 		 size_t count)
 {
-	struct sdsi_mbox_info info;
+	struct sdsi_mbox_info info = {};
 	size_t size;
 	int ret;
 
Signature · 1 line
2.34.1
author maintainer
#4 lore raw

PATCH v4 3/9 platform/x86/intel/sdsi: Add in-band BIOS lock support

In reply to David E. Box

From: Kuppuswamy Sathyanarayanan <[email protected]>

As per SDSi in-band interface specification, sec titled "BIOS lock for in-band provisioning", when IB_LOCK bit is set in control qword, the SDSI agent is only allowed to perform the read flow, but not allowed to provision license blob or license key. So add check for it in sdsi_provision().

---
V4 - no changes

V3 - no changes

V2 - Move sdsi_ib_locked() check after overflow check

 drivers/platform/x86/intel/sdsi.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
drivers/platform/x86/intel/sdsi.c +10 -0
index d80c2dc0ce71..bb3eaf5eb382 100644
@@ -67,6 +67,7 @@
 #define CTRL_OWNER			GENMASK(5, 4)
 #define CTRL_COMPLETE			BIT(6)
 #define CTRL_READY			BIT(7)
+#define CTRL_INBAND_LOCK		BIT(32)
 #define CTRL_STATUS			GENMASK(15, 8)
 #define CTRL_PACKET_SIZE		GENMASK(31, 16)
 #define CTRL_MSG_SIZE			GENMASK(63, 48)
@@ -346,6 +347,11 @@ static int sdsi_mbox_read(struct sdsi_priv *priv, struct sdsi_mbox_info *info, s
 	return sdsi_mbox_cmd_read(priv, info, data_size);
 }
 
+static bool sdsi_ib_locked(struct sdsi_priv *priv)
+{
+	return !!FIELD_GET(CTRL_INBAND_LOCK, readq(priv->control_addr));
+}
+
 static ssize_t sdsi_provision(struct sdsi_priv *priv, char *buf, size_t count,
 			      enum sdsi_command command)
 {
@@ -355,6 +361,10 @@ static ssize_t sdsi_provision(struct sdsi_priv *priv, char *buf, size_t count,
 	if (count > (SDSI_SIZE_WRITE_MSG - SDSI_SIZE_CMD))
 		return -EOVERFLOW;
 
+	/* Make sure In-band lock is not set */
+	if (sdsi_ib_locked(priv))
+		return -EPERM;
+
 	/* Qword aligned message + command qword */
 	info.size = round_up(count, SDSI_SIZE_CMD) + SDSI_SIZE_CMD;
 
Signature · 1 line
2.34.1
author maintainer
#5 lore raw

PATCH v4 4/9 platform/x86/intel/sdsi: Add attribute to read the current meter state

In reply to David E. Box

The meter_certificate file provides access to metering information that may be attested but is only updated every 8 hours. Add new attribute, meter_current, to allow reading an untested snapshot of the current values.

---
V4 - no changes

V3 - no changes

V2 - make control_flags a parameter to be eventually passed to
sdsi_mbox_cmd_read(). This removes the need for a lock which had been added to protect control_flags when it was a member of the private struct.

 drivers/platform/x86/intel/sdsi.c | 30 ++++++++++++++++++++++++------
 1 file changed, 24 insertions(+), 6 deletions(-)
drivers/platform/x86/intel/sdsi.c +24 -6
index bb3eaf5eb382..277e4f4b20ac 100644
@@ -68,6 +68,7 @@
 #define CTRL_COMPLETE			BIT(6)
 #define CTRL_READY			BIT(7)
 #define CTRL_INBAND_LOCK		BIT(32)
+#define CTRL_METER_ENABLE_DRAM		BIT(33)
 #define CTRL_STATUS			GENMASK(15, 8)
 #define CTRL_PACKET_SIZE		GENMASK(31, 16)
 #define CTRL_MSG_SIZE			GENMASK(63, 48)
@@ -95,6 +96,7 @@ enum sdsi_command {
 struct sdsi_mbox_info {
 	u64	*payload;
 	void	*buffer;
+	u64	control_flags;
 	int	size;
 };
 
@@ -250,7 +252,8 @@ static int sdsi_mbox_cmd_read(struct sdsi_priv *priv, struct sdsi_mbox_info *inf
 	control = FIELD_PREP(CTRL_EOM, 1) |
 		  FIELD_PREP(CTRL_SOM, 1) |
 		  FIELD_PREP(CTRL_RUN_BUSY, 1) |
-		  FIELD_PREP(CTRL_PACKET_SIZE, info->size);
+		  FIELD_PREP(CTRL_PACKET_SIZE, info->size) |
+		  info->control_flags;
 	writeq(control, priv->control_addr);
 
 	return sdsi_mbox_poll(priv, info, data_size);
@@ -424,8 +427,8 @@ static ssize_t provision_cap_write(struct file *filp, struct kobject *kobj,
 static BIN_ATTR_WO(provision_cap, SDSI_SIZE_WRITE_MSG);
 
 static ssize_t
-certificate_read(u64 command, struct sdsi_priv *priv, char *buf, loff_t off,
-		 size_t count)
+certificate_read(u64 command, u64 control_flags, struct sdsi_priv *priv,
+		 char *buf, loff_t off, size_t count)
 {
 	struct sdsi_mbox_info info = {};
 	size_t size;
@@ -441,6 +444,7 @@ certificate_read(u64 command, struct sdsi_priv *priv, char *buf, loff_t off,
 
 	info.payload = &command;
 	info.size = sizeof(command);
+	info.control_flags = control_flags;
 
 	ret = mutex_lock_interruptible(&priv->mb_lock);
 	if (ret)
@@ -472,7 +476,7 @@ state_certificate_read(struct file *filp, struct kobject *kobj,
 	struct device *dev = kobj_to_dev(kobj);
 	struct sdsi_priv *priv = dev_get_drvdata(dev);
 
-	return certificate_read(SDSI_CMD_READ_STATE, priv, buf, off, count);
+	return certificate_read(SDSI_CMD_READ_STATE, 0, priv, buf, off, count);
 }
 static BIN_ATTR_ADMIN_RO(state_certificate, SDSI_SIZE_READ_MSG);
 
@@ -484,10 +488,23 @@ meter_certificate_read(struct file *filp, struct kobject *kobj,
 	struct device *dev = kobj_to_dev(kobj);
 	struct sdsi_priv *priv = dev_get_drvdata(dev);
 
-	return certificate_read(SDSI_CMD_READ_METER, priv, buf, off, count);
+	return certificate_read(SDSI_CMD_READ_METER, 0, priv, buf, off, count);
 }
 static BIN_ATTR_ADMIN_RO(meter_certificate, SDSI_SIZE_READ_MSG);
 
+static ssize_t
+meter_current_read(struct file *filp, struct kobject *kobj,
+		   struct bin_attribute *attr, char *buf, loff_t off,
+		   size_t count)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct sdsi_priv *priv = dev_get_drvdata(dev);
+
+	return certificate_read(SDSI_CMD_READ_METER, CTRL_METER_ENABLE_DRAM,
+				priv, buf, off, count);
+}
+static BIN_ATTR_ADMIN_RO(meter_current, SDSI_SIZE_READ_MSG);
+
 static ssize_t registers_read(struct file *filp, struct kobject *kobj,
 			      struct bin_attribute *attr, char *buf, loff_t off,
 			      size_t count)
@@ -518,6 +535,7 @@ static struct bin_attribute *sdsi_bin_attrs[] = {
 	&bin_attr_registers,
 	&bin_attr_state_certificate,
 	&bin_attr_meter_certificate,
+	&bin_attr_meter_current,
 	&bin_attr_provision_akc,
 	&bin_attr_provision_cap,
 	NULL
@@ -537,7 +555,7 @@ sdsi_battr_is_visible(struct kobject *kobj, struct bin_attribute *attr, int n)
 	if (!(priv->features & SDSI_FEATURE_SDSI))
 		return 0;
 
-	if (attr == &bin_attr_meter_certificate)
+	if (attr == &bin_attr_meter_certificate || attr == &bin_attr_meter_current)
 		return (priv->features & SDSI_FEATURE_METERING) ?
 				attr->attr.mode : 0;
 
Signature · 1 line
2.34.1
author maintainer
#6 lore raw

PATCH v4 5/9 tools/arch/x86/intel_sdsi: Fix maximum meter bundle length

In reply to David E. Box

The maximum number of bundles in the meter certificate was set to 8 which is much less than the maximum. Instead, since the bundles appear at the end of the file, set it based on the remaining file size from the bundle start position.

Fixes 7fdc03a7370f ("tools/arch/x86: intel_sdsi: Add support for reading meter certificates")

---
V4 - no changes

V3 - Add suggested macros for the number of bundles and bundle size.

V2 - Split of V1 patch 7

 tools/arch/x86/intel_sdsi/intel_sdsi.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)
tools/arch/x86/intel_sdsi/intel_sdsi.c +8 -4
index 2cd92761f171..7eaffcbff788 100644
@@ -43,7 +43,6 @@
 #define METER_CERT_MAX_SIZE	4096
 #define STATE_MAX_NUM_LICENSES	16
 #define STATE_MAX_NUM_IN_BUNDLE	(uint32_t)8
-#define METER_MAX_NUM_BUNDLES	8
 
 #define __round_mask(x, y) ((__typeof__(x))((y) - 1))
 #define round_up(x, y) ((((x) - 1) | __round_mask(x, y)) + 1)
@@ -167,6 +166,11 @@ struct bundle_encoding_counter {
 	uint32_t encoding;
 	uint32_t counter;
 };
+#define METER_BUNDLE_SIZE sizeof(struct bundle_encoding_counter)
+#define BUNDLE_COUNT(length) ((length) / METER_BUNDLE_SIZE)
+#define METER_MAX_NUM_BUNDLES							\
+		((METER_CERT_MAX_SIZE - sizeof(struct meter_certificate)) /	\
+		 sizeof(struct bundle_encoding_counter))
 
 struct sdsi_dev {
 	struct sdsi_regs regs;
@@ -386,9 +390,9 @@ static int sdsi_meter_cert_show(struct sdsi_dev *s)
 		return -1;
 	}
 
-	if (mc->bundle_length > METER_MAX_NUM_BUNDLES * 8)  {
-		fprintf(stderr, "More than %d bundles: %d\n",
-			METER_MAX_NUM_BUNDLES, mc->bundle_length / 8);
+	if (mc->bundle_length > METER_MAX_NUM_BUNDLES * METER_BUNDLE_SIZE)  {
+		fprintf(stderr, "More than %ld bundles: actual %ld\n",
+			METER_MAX_NUM_BUNDLES, BUNDLE_COUNT(mc->bundle_length));
 		return -1;
 	}
 
Signature · 1 line
2.34.1
author maintainer
#7 lore raw

PATCH v4 6/9 tools/arch/x86/intel_sdsi: Fix meter_show display

In reply to David E. Box

Fixes sdsi_meter_cert_show() to correctly decode and display the meter certificate output. Adds and displays a missing version field, displays the ASCII name of the signature, and fixes the print alignment.

Fixes 7fdc03a7370f ("tools/arch/x86: intel_sdsi: Add support for reading meter certificates")

---
V4 - no changes

V3 - Change patch subject and changelog to clarify changes.
- Use new BUNDLE_COUNT #def

V2 - Split of V1 patch 7

 tools/arch/x86/intel_sdsi/intel_sdsi.c | 29 +++++++++++++++++---------
 1 file changed, 19 insertions(+), 10 deletions(-)
tools/arch/x86/intel_sdsi/intel_sdsi.c +19 -10
index 7eaffcbff788..ae29214da102 100644
@@ -153,11 +153,12 @@ struct bundle_encoding {
 };
 
 struct meter_certificate {
-	uint32_t block_signature;
+	uint32_t signature;
+	uint32_t version;
+	uint64_t ppin;
 	uint32_t counter_unit;
-	uint64_t ppin;
 	uint32_t bundle_length;
-	uint32_t reserved;
+	uint64_t reserved;
 	uint32_t mmrc_encoding;
 	uint32_t mmrc_counter;
 };
@@ -338,6 +339,7 @@ static int sdsi_meter_cert_show(struct sdsi_dev *s)
 	uint32_t count = 0;
 	FILE *cert_ptr;
 	int ret, size;
+	char name[4];
 
 	ret = sdsi_update_registers(s);
 	if (ret)
@@ -379,12 +381,19 @@ static int sdsi_meter_cert_show(struct sdsi_dev *s)
 	printf("\n");
 	printf("Meter certificate for device %s\n", s->dev_name);
 	printf("\n");
-	printf("Block Signature:       0x%x\n", mc->block_signature);
-	printf("Count Unit:            %dms\n", mc->counter_unit);
-	printf("PPIN:                  0x%lx\n", mc->ppin);
-	printf("Feature Bundle Length: %d\n", mc->bundle_length);
-	printf("MMRC encoding:         %d\n", mc->mmrc_encoding);
-	printf("MMRC counter:          %d\n", mc->mmrc_counter);
+
+	get_feature(mc->signature, name);
+	printf("Signature:                    %.4s\n", name);
+
+	printf("Version:                      %d\n", mc->version);
+	printf("Count Unit:                   %dms\n", mc->counter_unit);
+	printf("PPIN:                         0x%lx\n", mc->ppin);
+	printf("Feature Bundle Length:        %d\n", mc->bundle_length);
+
+	get_feature(mc->mmrc_encoding, name);
+	printf("MMRC encoding:                %.4s\n", name);
+
+	printf("MMRC counter:                 %d\n", mc->mmrc_counter);
 	if (mc->bundle_length % 8) {
 		fprintf(stderr, "Invalid bundle length\n");
 		return -1;
@@ -398,7 +407,7 @@ static int sdsi_meter_cert_show(struct sdsi_dev *s)
 
 	bec = (void *)(mc) + sizeof(mc);
 
-	printf("Number of Feature Counters:          %d\n", mc->bundle_length / 8);
+	printf("Number of Feature Counters:   %ld\n", BUNDLE_COUNT(mc->bundle_length));
 	while (count++ < mc->bundle_length / 8) {
 		char feature[5];
 
Signature · 1 line
2.34.1
author maintainer
#8 lore raw

PATCH v4 7/9 tools/arch/x86/intel_sdsi: Fix meter_certificate decoding

In reply to David E. Box

Fix errors in the calculation of the start position of the counters and in the display loop. While here, use a #define for the bundle count and size.

Fixes 7fdc03a7370f ("tools/arch/x86: intel_sdsi: Add support for reading meter certificates")

---
V4 - Use suggested struct bundle_encoding_counter cast

V3 - Use macros for bundle size and count

V2 - Split of V1 patch 7

 tools/arch/x86/intel_sdsi/intel_sdsi.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
tools/arch/x86/intel_sdsi/intel_sdsi.c +4 -3
index ae29214da102..ba2a6b6645ae 100644
@@ -394,7 +394,7 @@ static int sdsi_meter_cert_show(struct sdsi_dev *s)
 	printf("MMRC encoding:                %.4s\n", name);
 
 	printf("MMRC counter:                 %d\n", mc->mmrc_counter);
-	if (mc->bundle_length % 8) {
+	if (mc->bundle_length % METER_BUNDLE_SIZE) {
 		fprintf(stderr, "Invalid bundle length\n");
 		return -1;
 	}
@@ -405,15 +405,16 @@ static int sdsi_meter_cert_show(struct sdsi_dev *s)
 		return -1;
 	}
 
-	bec = (void *)(mc) + sizeof(mc);
+	bec = (struct bundle_encoding_counter *)(mc + 1);
 
 	printf("Number of Feature Counters:   %ld\n", BUNDLE_COUNT(mc->bundle_length));
-	while (count++ < mc->bundle_length / 8) {
+	while (count < BUNDLE_COUNT(mc->bundle_length)) {
 		char feature[5];
 
 		feature[4] = '\0';
 		get_feature(bec[count].encoding, feature);
 		printf("    %s:          %d\n", feature, bec[count].counter);
+		++count;
 	}
 
 	return 0;
Signature · 1 line
2.34.1
maintainer Reviewed-by on v4 7/9
#9 lore raw

Re: [PATCH V4 7/9] tools/arch/x86/intel_sdsi: Fix meter_certificate decoding

Quoted 39 lines · David E. Box

Fix errors in the calculation of the start position of the counters and in the display loop. While here, use a #define for the bundle count and size.

Fixes 7fdc03a7370f ("tools/arch/x86: intel_sdsi: Add support for reading meter certificates")

---
V4 - Use suggested struct bundle_encoding_counter cast

V3 - Use macros for bundle size and count

V2 - Split of V1 patch 7

 tools/arch/x86/intel_sdsi/intel_sdsi.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
tools/arch/x86/intel_sdsi/intel_sdsi.c +2 -3
index ae29214da102..ba2a6b6645ae 100644
@@ -394,7 +394,7 @@ static int sdsi_meter_cert_show(struct sdsi_dev *s)
 	printf("MMRC encoding:                %.4s\n", name);
 
 	printf("MMRC counter:                 %d\n", mc->mmrc_counter);
-	if (mc->bundle_length % 8) {
+	if (mc->bundle_length % METER_BUNDLE_SIZE) {
 		fprintf(stderr, "Invalid bundle length\n");
 		return -1;
 	}
@@ -405,15 +405,16 @@ static int sdsi_meter_cert_show(struct sdsi_dev *s)
 		return -1;
 	}
 
-	bec = (void *)(mc) + sizeof(mc);
+	bec = (struct bundle_encoding_counter *)(mc + 1);
 
 	printf("Number of Feature Counters:   %ld\n", BUNDLE_COUNT(mc->bundle_length));
-	while (count++ < mc->bundle_length / 8) {

tools/arch/x86/intel_sdsi/intel_sdsi.c static int sdsi_meter_cert_show(struct sdsi_dev *s) · line 420

Quoted 10 lines
tools/arch/x86/intel_sdsi/intel_sdsi.c +2 -0
+	while (count < BUNDLE_COUNT(mc->bundle_length)) {
 		char feature[5];
 
 		feature[4] = '\0';
 		get_feature(bec[count].encoding, feature);
 		printf("    %s:          %d\n", feature, bec[count].counter);
+		++count;
 	}
 
 	return 0;
Signature · 1 line
 i.
author maintainer
#10 lore raw

PATCH v4 8/9 platform/x86/intel/sdsi: Simplify ascii printing

In reply to David E. Box

Add #define for feature length and move NUL assignment from callers to get_feature().

---
V4 - Move NUL assignment to get_feature() and increment FEAT_LEN.

V3 - Add FEAT_LEN #def

V2 - Split of V1 patch 7

 tools/arch/x86/intel_sdsi/intel_sdsi.c | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)
tools/arch/x86/intel_sdsi/intel_sdsi.c +8 -9
index ba2a6b6645ae..301213370740 100644
@@ -43,6 +43,7 @@
 #define METER_CERT_MAX_SIZE	4096
 #define STATE_MAX_NUM_LICENSES	16
 #define STATE_MAX_NUM_IN_BUNDLE	(uint32_t)8
+#define FEAT_LEN		5	/* 4 plus NUL terminator */
 
 #define __round_mask(x, y) ((__typeof__(x))((y) - 1))
 #define round_up(x, y) ((((x) - 1) | __round_mask(x, y)) + 1)
@@ -321,10 +322,11 @@ static char *content_type(uint32_t type)
 	}
 }
 
-static void get_feature(uint32_t encoding, char *feature)
+static void get_feature(uint32_t encoding, char feature[5])
 {
 	char *name = (char *)&encoding;
 
+	feature[4] = '\0';
 	feature[3] = name[0];
 	feature[2] = name[1];
 	feature[1] = name[2];
@@ -339,7 +341,7 @@ static int sdsi_meter_cert_show(struct sdsi_dev *s)
 	uint32_t count = 0;
 	FILE *cert_ptr;
 	int ret, size;
-	char name[4];
+	char name[FEAT_LEN];
 
 	ret = sdsi_update_registers(s);
 	if (ret)
@@ -383,7 +385,7 @@ static int sdsi_meter_cert_show(struct sdsi_dev *s)
 	printf("\n");
 
 	get_feature(mc->signature, name);
-	printf("Signature:                    %.4s\n", name);
+	printf("Signature:                    %s\n", name);
 
 	printf("Version:                      %d\n", mc->version);
 	printf("Count Unit:                   %dms\n", mc->counter_unit);
@@ -391,7 +393,7 @@ static int sdsi_meter_cert_show(struct sdsi_dev *s)
 	printf("Feature Bundle Length:        %d\n", mc->bundle_length);
 
 	get_feature(mc->mmrc_encoding, name);
-	printf("MMRC encoding:                %.4s\n", name);
+	printf("MMRC encoding:                %s\n", name);
 
 	printf("MMRC counter:                 %d\n", mc->mmrc_counter);
 	if (mc->bundle_length % METER_BUNDLE_SIZE) {
@@ -409,9 +411,8 @@ static int sdsi_meter_cert_show(struct sdsi_dev *s)
 
 	printf("Number of Feature Counters:   %ld\n", BUNDLE_COUNT(mc->bundle_length));
 	while (count < BUNDLE_COUNT(mc->bundle_length)) {
-		char feature[5];
+		char feature[FEAT_LEN];
 
-		feature[4] = '\0';
 		get_feature(bec[count].encoding, feature);
 		printf("    %s:          %d\n", feature, bec[count].counter);
 		++count;
@@ -494,7 +495,7 @@ static int sdsi_state_cert_show(struct sdsi_dev *s)
 			sizeof(*lki) +			// size of the license key info
 			offset;				// offset to this blob content
 		struct bundle_encoding *bundle = (void *)(lbc) + sizeof(*lbc);
-		char feature[5];
+		char feature[FEAT_LEN];
 		uint32_t i;
 
 		printf("     Blob %d:\n", count - 1);
@@ -507,8 +508,6 @@ static int sdsi_state_cert_show(struct sdsi_dev *s)
 		printf("        Blob revision ID:           %u\n", lbc->rev_id);
 		printf("        Number of Features:         %u\n", lbc->num_bundles);
 
-		feature[4] = '\0';
-
 		for (i = 0; i < min(lbc->num_bundles, STATE_MAX_NUM_IN_BUNDLE); i++) {
 			get_feature(bundle[i].encoding, feature);
 			printf("                 Feature %d:         %s\n", i, feature);
Signature · 1 line
2.34.1
maintainer Reviewed-by on v4 8/9
#11 lore raw

Re: [PATCH V4 8/9] platform/x86/intel/sdsi: Simplify ascii printing

Quoted 30 lines · David E. Box

Add #define for feature length and move NUL assignment from callers to get_feature().

---
V4 - Move NUL assignment to get_feature() and increment FEAT_LEN.

V3 - Add FEAT_LEN #def

V2 - Split of V1 patch 7

 tools/arch/x86/intel_sdsi/intel_sdsi.c | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)
tools/arch/x86/intel_sdsi/intel_sdsi.c +1 -0
index ba2a6b6645ae..301213370740 100644
@@ -43,6 +43,7 @@
 #define METER_CERT_MAX_SIZE	4096
 #define STATE_MAX_NUM_LICENSES	16
 #define STATE_MAX_NUM_IN_BUNDLE	(uint32_t)8
+#define FEAT_LEN		5	/* 4 plus NUL terminator */
 
 #define __round_mask(x, y) ((__typeof__(x))((y) - 1))
 #define round_up(x, y) ((((x) - 1) | __round_mask(x, y)) + 1)
@@ -321,10 +322,11 @@ static char *content_type(uint32_t type)
 	}
 }

tools/arch/x86/intel_sdsi/intel_sdsi.c static char *content_type(uint32_t type) · line 332

Quoted 10 lines
tools/arch/x86/intel_sdsi/intel_sdsi.c +2 -1
 
-static void get_feature(uint32_t encoding, char *feature)
+static void get_feature(uint32_t encoding, char feature[5])
 {
 	char *name = (char *)&encoding;
 
+	feature[4] = '\0';
 	feature[3] = name[0];
 	feature[2] = name[1];
 	feature[1] = name[2];

Works, assuming none of the name bytes are 0.

Signature · 1 line
 i.
Quoted 56 lines
tools/arch/x86/intel_sdsi/intel_sdsi.c +5 -8
@@ -339,7 +341,7 @@ static int sdsi_meter_cert_show(struct sdsi_dev *s)
 	uint32_t count = 0;
 	FILE *cert_ptr;
 	int ret, size;
-	char name[4];
+	char name[FEAT_LEN];
 
 	ret = sdsi_update_registers(s);
 	if (ret)
@@ -383,7 +385,7 @@ static int sdsi_meter_cert_show(struct sdsi_dev *s)
 	printf("\n");
 
 	get_feature(mc->signature, name);
-	printf("Signature:                    %.4s\n", name);
+	printf("Signature:                    %s\n", name);
 
 	printf("Version:                      %d\n", mc->version);
 	printf("Count Unit:                   %dms\n", mc->counter_unit);
@@ -391,7 +393,7 @@ static int sdsi_meter_cert_show(struct sdsi_dev *s)
 	printf("Feature Bundle Length:        %d\n", mc->bundle_length);
 
 	get_feature(mc->mmrc_encoding, name);
-	printf("MMRC encoding:                %.4s\n", name);
+	printf("MMRC encoding:                %s\n", name);
 
 	printf("MMRC counter:                 %d\n", mc->mmrc_counter);
 	if (mc->bundle_length % METER_BUNDLE_SIZE) {
@@ -409,9 +411,8 @@ static int sdsi_meter_cert_show(struct sdsi_dev *s)
 
 	printf("Number of Feature Counters:   %ld\n", BUNDLE_COUNT(mc->bundle_length));
 	while (count < BUNDLE_COUNT(mc->bundle_length)) {
-		char feature[5];
+		char feature[FEAT_LEN];
 
-		feature[4] = '\0';
 		get_feature(bec[count].encoding, feature);
 		printf("    %s:          %d\n", feature, bec[count].counter);
 		++count;
@@ -494,7 +495,7 @@ static int sdsi_state_cert_show(struct sdsi_dev *s)
 			sizeof(*lki) +			// size of the license key info
 			offset;				// offset to this blob content
 		struct bundle_encoding *bundle = (void *)(lbc) + sizeof(*lbc);
-		char feature[5];
+		char feature[FEAT_LEN];
 		uint32_t i;
 
 		printf("     Blob %d:\n", count - 1);
@@ -507,8 +508,6 @@ static int sdsi_state_cert_show(struct sdsi_dev *s)
 		printf("        Blob revision ID:           %u\n", lbc->rev_id);
 		printf("        Number of Features:         %u\n", lbc->num_bundles);
 
-		feature[4] = '\0';
-
 		for (i = 0; i < min(lbc->num_bundles, STATE_MAX_NUM_IN_BUNDLE); i++) {
 			get_feature(bundle[i].encoding, feature);
 			printf("                 Feature %d:         %s\n", i, feature);
maintainer
#12 lore raw

Re: [PATCH V4 8/9] platform/x86/intel/sdsi: Simplify ascii printing

Quoted 38 lines · Ilpo Järvinen
Quoted 36 lines · David E. Box

Add #define for feature length and move NUL assignment from callers to get_feature().

---
V4 - Move NUL assignment to get_feature() and increment FEAT_LEN.

V3 - Add FEAT_LEN #def

V2 - Split of V1 patch 7

 tools/arch/x86/intel_sdsi/intel_sdsi.c | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)
tools/arch/x86/intel_sdsi/intel_sdsi.c +2 -1
index ba2a6b6645ae..301213370740 100644
@@ -43,6 +43,7 @@
 #define METER_CERT_MAX_SIZE	4096
 #define STATE_MAX_NUM_LICENSES	16
 #define STATE_MAX_NUM_IN_BUNDLE	(uint32_t)8
+#define FEAT_LEN		5	/* 4 plus NUL terminator */
 
 #define __round_mask(x, y) ((__typeof__(x))((y) - 1))
 #define round_up(x, y) ((((x) - 1) | __round_mask(x, y)) + 1)
@@ -321,10 +322,11 @@ static char *content_type(uint32_t type)
 	}
 }
 
-static void get_feature(uint32_t encoding, char *feature)
+static void get_feature(uint32_t encoding, char feature[5])
 {
 	char *name = (char *)&encoding;
 
Quoted 6 lines

tools/arch/x86/intel_sdsi/intel_sdsi.c static char *content_type(uint32_t type) · line 332

Quoted 4 lines
tools/arch/x86/intel_sdsi/intel_sdsi.c +1 -0
+	feature[4] = '\0';
 	feature[3] = name[0];
 	feature[2] = name[1];
 	feature[1] = name[2];

Works, assuming none of the name bytes are 0.

Before somebody starts to wonder, while writing that, I thought this patch was also about alignment (were <4 chars would have mattered), which was just wrong recollection from my part and related to some other patch in this series.

Quoted 1 line
Signature · 1 line
 i.
author maintainer
#13 lore raw

PATCH v4 9/9 tools: intel_sdsi: Add current meter support

In reply to David E. Box

Add support to read the 'meter_current' file. The display is the same as the 'meter_certificate', but will show the current snapshot of the counters.

---
V4 - no changes

V3 - no changes

V2 - Set the name of the file to be opened once.

 tools/arch/x86/intel_sdsi/intel_sdsi.c | 49 ++++++++++++++++----------
 1 file changed, 30 insertions(+), 19 deletions(-)
tools/arch/x86/intel_sdsi/intel_sdsi.c +30 -19
index 301213370740..766a5d26f534 100644
@@ -185,6 +185,7 @@ struct sdsi_dev {
 enum command {
 	CMD_SOCKET_INFO,
 	CMD_METER_CERT,
+	CMD_METER_CURRENT_CERT,
 	CMD_STATE_CERT,
 	CMD_PROV_AKC,
 	CMD_PROV_CAP,
@@ -333,13 +334,14 @@ static void get_feature(uint32_t encoding, char feature[5])
 	feature[0] = name[3];
 }
 
-static int sdsi_meter_cert_show(struct sdsi_dev *s)
+static int sdsi_meter_cert_show(struct sdsi_dev *s, bool show_current)
 {
 	char buf[METER_CERT_MAX_SIZE] = {0};
 	struct bundle_encoding_counter *bec;
 	struct meter_certificate *mc;
 	uint32_t count = 0;
 	FILE *cert_ptr;
+	char *cert_fname;
 	int ret, size;
 	char name[FEAT_LEN];
 
@@ -349,7 +351,6 @@ static int sdsi_meter_cert_show(struct sdsi_dev *s)
 
 	if (!s->regs.en_features.sdsi) {
 		fprintf(stderr, "SDSi feature is present but not enabled.\n");
-		fprintf(stderr, " Unable to read meter certificate\n");
 		return -1;
 	}
 
@@ -364,15 +365,17 @@ static int sdsi_meter_cert_show(struct sdsi_dev *s)
 		return ret;
 	}
 
-	cert_ptr = fopen("meter_certificate", "r");
+	cert_fname = show_current ? "meter_current" : "meter_certificate";
+	cert_ptr = fopen(cert_fname, "r");
+
 	if (!cert_ptr) {
-		perror("Could not open 'meter_certificate' file");
+		fprintf(stderr, "Could not open '%s' file: %s", cert_fname, strerror(errno));
 		return -1;
 	}
 
 	size = fread(buf, 1, sizeof(buf), cert_ptr);
 	if (!size) {
-		fprintf(stderr, "Could not read 'meter_certificate' file\n");
+		fprintf(stderr, "Could not read '%s' file\n", cert_fname);
 		fclose(cert_ptr);
 		return -1;
 	}
@@ -738,7 +741,7 @@ static void sdsi_free_dev(struct sdsi_dev *s)
 
 static void usage(char *prog)
 {
-	printf("Usage: %s [-l] [-d DEVNO [-i] [-s] [-m] [-a FILE] [-c FILE]]\n", prog);
+	printf("Usage: %s [-l] [-d DEVNO [-i] [-s] [-m | -C] [-a FILE] [-c FILE]\n", prog);
 }
 
 static void show_help(void)
@@ -747,8 +750,9 @@ static void show_help(void)
 	printf("  %-18s\t%s\n", "-l, --list",           "list available On Demand devices");
 	printf("  %-18s\t%s\n", "-d, --devno DEVNO",    "On Demand device number");
 	printf("  %-18s\t%s\n", "-i, --info",           "show socket information");
-	printf("  %-18s\t%s\n", "-s, --state",          "show state certificate");
-	printf("  %-18s\t%s\n", "-m, --meter",          "show meter certificate");
+	printf("  %-18s\t%s\n", "-s, --state",          "show state certificate data");
+	printf("  %-18s\t%s\n", "-m, --meter",          "show meter certificate data");
+	printf("  %-18s\t%s\n", "-C, --meter_current",  "show live unattested meter data");
 	printf("  %-18s\t%s\n", "-a, --akc FILE",       "provision socket with AKC FILE");
 	printf("  %-18s\t%s\n", "-c, --cap FILE>",      "provision socket with CAP FILE");
 }
@@ -764,21 +768,22 @@ int main(int argc, char *argv[])
 	int option_index = 0;
 
 	static struct option long_options[] = {
-		{"akc",		required_argument,	0, 'a'},
-		{"cap",		required_argument,	0, 'c'},
-		{"devno",	required_argument,	0, 'd'},
-		{"help",	no_argument,		0, 'h'},
-		{"info",	no_argument,		0, 'i'},
-		{"list",	no_argument,		0, 'l'},
-		{"meter",	no_argument,		0, 'm'},
-		{"state",	no_argument,		0, 's'},
-		{0,		0,			0, 0 }
+		{"akc",			required_argument,	0, 'a'},
+		{"cap",			required_argument,	0, 'c'},
+		{"devno",		required_argument,	0, 'd'},
+		{"help",		no_argument,		0, 'h'},
+		{"info",		no_argument,		0, 'i'},
+		{"list",		no_argument,		0, 'l'},
+		{"meter",		no_argument,		0, 'm'},
+		{"meter_current",	no_argument,		0, 'C'},
+		{"state",		no_argument,		0, 's'},
+		{0,			0,			0, 0 }
 	};
 
 
 	progname = argv[0];
 
-	while ((opt = getopt_long_only(argc, argv, "+a:c:d:hilms", long_options,
+	while ((opt = getopt_long_only(argc, argv, "+a:c:d:hilmCs", long_options,
 			&option_index)) != -1) {
 		switch (opt) {
 		case 'd':
@@ -794,6 +799,9 @@ int main(int argc, char *argv[])
 		case 'm':
 			command = CMD_METER_CERT;
 			break;
+		case 'C':
+			command = CMD_METER_CURRENT_CERT;
+			break;
 		case 's':
 			command = CMD_STATE_CERT;
 			break;
@@ -832,7 +840,10 @@ int main(int argc, char *argv[])
 			ret = sdsi_read_reg(s);
 			break;
 		case CMD_METER_CERT:
-			ret = sdsi_meter_cert_show(s);
+			ret = sdsi_meter_cert_show(s, false);
+			break;
+		case CMD_METER_CURRENT_CERT:
+			ret = sdsi_meter_cert_show(s, true);
 			break;
 		case CMD_STATE_CERT:
 			ret = sdsi_state_cert_show(s);
Signature · 1 line
2.34.1
#14 lore raw
In reply to David E. Box

Hi,

Quoted 4 lines · David E. Box

Adds driver and tool support for a new "current" meter that allows reading the most current, but not attested, value of the meter counters. Also adds fixes for the intel_sdsi tool.

Quoted 9 lines

David E. Box (8):
platform/x86/intel/sdsi: Set message size during writes platform/x86/intel/sdsi: Combine read and write mailbox flows platform/x86/intel/sdsi: Add attribute to read the current meter state tools/arch/x86/intel_sdsi: Fix maximum meter bundle length tools/arch/x86/intel_sdsi: Fix meter_show display tools/arch/x86/intel_sdsi: Fix meter_certificate decoding platform/x86/intel/sdsi: Simplify ascii printing
tools: intel_sdsi: Add current meter support

Note the subject prefixes of these last 2 are wrong and should both have been "tools/arch/x86/intel_sdsi" I have fixed this up while merging this series:

Thank you for your patch-series, I've applied the series to my review-hans branch:
https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=review-hans

Once I've run some tests on this branch the patches there will be added to the platform-drivers-x86/for-next branch and eventually will be included in the pdx86 pull-request to Linus for the next merge-window.

Regards,

Hans

Quoted 10 lines

Kuppuswamy Sathyanarayanan (1):
platform/x86/intel/sdsi: Add in-band BIOS lock support

 drivers/platform/x86/intel/sdsi.c      | 118 ++++++++++++++++---------
 tools/arch/x86/intel_sdsi/intel_sdsi.c | 108 +++++++++++++---------
 2 files changed, 144 insertions(+), 82 deletions(-)

base-commit: 4cece764965020c22cff7665b18a012006359095