powerpc/pseries: Fixes for lparstat boot reports
Shrikanth Hegde
reviewerv2 cover powerpc/pseries: Fixes for lparstat boot reports
Currently lparstat reports which shows since LPAR boot are wrong for some fields. There is a need for storing the PIC(Pool Idle Count) at boot for accurate reporting. PATCH 1 Does that.
While there, it was noticed that hcall return value is long and both h_get_ppp and h_get_mpp could set the uninitialized values if the hcall fails. PATCH 2 does that.
v1 -> v2:
- Nathan pointed out the issues surrounding the h_pic call. Addressed those.
- Added a pr_debug if h_pic fails during lparcfg_init
- If h_pic fails while reading lparcfg, related files are not exported.
- Added failure checks for h_get_mpp, h_get_ppp calls as well.
v1: https://lore.kernel.org/all/[email protected]/
Shrikanth Hegde (2):
powerpc/pseries: Add pool idle time at LPAR boot powerpc/pseries: Add fail related checks for h_get_mpp and h_get_ppp
arch/powerpc/include/asm/hvcall.h | 2 +- arch/powerpc/platforms/pseries/lpar.c | 6 ++-- arch/powerpc/platforms/pseries/lparcfg.c | 45 +++++++++++++++++------- 3 files changed, 37 insertions(+), 16 deletions(-)
--
2.39.3
Shrikanth Hegde
reviewerPATCH v2 1/2 powerpc/pseries: Add pool idle time at LPAR boot
When there are no options specified for lparstat, it is expected to give reports since LPAR(Logical Partition) boot.
APP(Available Processor Pool) is an indicator of how many cores in the shared pool are free to use in Shared Processor LPAR(SPLPAR). APP is derived using pool_idle_time which is obtained using H_PIC call.
The interval based reports show correct APP value while since boot report shows very high APP values. This happens because in that case APP is obtained by dividing pool idle time by LPAR uptime. Since pool idle time is reported by the PowerVM hypervisor since its boot, it need not align with LPAR boot.
To fix that export boot pool idle time in lparcfg and powerpc-utils will use this info to derive APP as below for since boot reports.
APP = (pool idle time - boot pool idle time) / (uptime * timebase)
Results:: Observe APP values.
====================== Shared LPAR ================================ lparstat
System Configuration
type=Shared mode=Uncapped smt=8 lcpu=12 mem=15573440 kB cpus=37 ent=12.00
reboot
stress-ng --cpu=$(nproc) -t 600
sleep 600
So in this case app is expected to close to 37-6=31.
====== 6.9-rc1 and lparstat 1.3.10 =============
%user %sys %wait %idle physc %entc lbusy app vcsw phint ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- 47.48 0.01 0.00 52.51 0.00 0.00 47.49 69099.72 541547 21
=== With this patch and powerpc-utils patch to do the above equation ===
%user %sys %wait %idle physc %entc lbusy app vcsw phint ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- 47.48 0.01 0.00 52.51 5.73 47.75 47.49 31.21 541753 21
=====================================================================
Note: physc, purr/idle purr being inaccurate is being handled in a separate patch in powerpc-utils tree.
--- arch/powerpc/platforms/pseries/lparcfg.c | 39 ++++++++++++++++++------ 1 file changed, 30 insertions(+), 9 deletions(-)
arch/powerpc/platforms/pseries/lparcfg.c +30 -9
@@ -170,20 +170,24 @@ static void show_gpci_data(struct seq_file *m)kfree (buf); } -static unsigned h_pic (unsigned long *pool_idle_time, -unsigned long *num_procs) +static long h_pic (unsigned long *pool_idle_time, +unsigned long *num_procs) { -unsigned long rc; -unsigned long retbuf[PLPAR_HCALL_BUFSIZE ]; +long rc; +unsigned long retbuf[PLPAR_HCALL_BUFSIZE ] = {0 }; rc =plpar_hcall (H_PIC , retbuf); - *pool_idle_time = retbuf[0 ]; - *num_procs = retbuf[1 ]; +if (pool_idle_time) + *pool_idle_time = retbuf[0 ]; +if (num_procs) + *num_procs = retbuf[1 ];return rc; } +unsigned long boot_pool_idle_time; +/* * parse_ppp_data * Parse out the data returned from h_get_ppp and h_pic
@@ -215,9 +219,15 @@ static void parse_ppp_data(struct seq_file *m)seq_printf (m,"pool_capacity=%d\n" , ppp_data.active_procs_in_pool *100 ); -h_pic (&pool_idle_time, &pool_procs); -seq_printf (m,"pool_idle_time=%ld\n" , pool_idle_time); -seq_printf (m,"pool_num_procs=%ld\n" , pool_procs); +/* In case h_pic call is not successful, this would result in +* APP values being wrong in tools like lparstat. +*/ + +if (h_pic (&pool_idle_time, &pool_procs) ==H_SUCCESS ) { +seq_printf (m,"pool_idle_time=%ld\n" , pool_idle_time); +seq_printf (m,"pool_num_procs=%ld\n" , pool_procs); +seq_printf (m,"boot_pool_idle_time=%ld\n" , boot_pool_idle_time); + } } seq_printf(m, "unallocated_capacity_weight=%d\n",
@@ -792,6 +802,7 @@ static const struct proc_ops lparcfg_proc_ops = {static int __init lparcfg_init (void ) {umode_t mode =0444 ; +long retval;/* Allow writing if we have FW_FEATURE_SPLPAR */ if (firmware_has_feature (FW_FEATURE_SPLPAR ))
@@ -801,6 +812,16 @@ static int __init lparcfg_init(void)printk (KERN_ERR "Failed to create powerpc/lparcfg\n" );return -EIO ; } + +/* If this call fails, it would result in APP values +* being wrong for since boot reports of lparstat +*/ + retval =h_pic (&boot_pool_idle_time,NULL ); + +if (retval !=H_SUCCESS ) +pr_debug ("H_PIC failed during lparcfg init retval: %ld\n" , + retval); +return 0 ; }machine_device_initcall (pseries, lparcfg_init);
--
2.39.3
Shrikanth Hegde
reviewerPATCH v2 2/2 powerpc/pseries: Add failure related checks for h_get_mpp and h_get_ppp
In reply to Shrikanth HegdeCouple of Minor fixes:
- hcall return values are long. Fix that for h_get_mpp, h_get_ppp and parse_ppp_data
- If hcall fails, values set should be at-least zero. It shouldn't be uninitialized values. Fix that for h_get_mpp and h_get_ppp
--- arch/powerpc/include/asm/hvcall.h | 2 +- arch/powerpc/platforms/pseries/lpar.c | 6 +++--- arch/powerpc/platforms/pseries/lparcfg.c | 6 +++--- 3 files changed, 7 insertions(+), 7 deletions(-)
arch/powerpc/include/asm/hvcall.h +1 -1
@@ -570,7 +570,7 @@ struct hvcall_mpp_data {unsigned long backing_mem; }; -int h_get_mpp (struct hvcall_mpp_data *); +long h_get_mpp (struct hvcall_mpp_data *mpp_data);struct hvcall_mpp_x_data {unsigned long coalesced_bytes;
arch/powerpc/platforms/pseries/lpar.c +3 -3
@@ -1886,10 +1886,10 @@ notrace void __trace_hcall_exit(long opcode, long retval, unsigned long *retbuf)* h_get_mpp * H_GET_MPP hcall returns info in 7 parms */ -int h_get_mpp (struct hvcall_mpp_data *mpp_data) +long h_get_mpp (struct hvcall_mpp_data *mpp_data) { -int rc; -unsigned long retbuf[PLPAR_HCALL9_BUFSIZE ]; +unsigned long retbuf[PLPAR_HCALL9_BUFSIZE ] = {0 }; +long rc; rc =plpar_hcall9 (H_GET_MPP , retbuf);
arch/powerpc/platforms/pseries/lparcfg.c +3 -3
@@ -113,8 +113,8 @@ struct hvcall_ppp_data {*/ static unsigned int h_get_ppp (struct hvcall_ppp_data *ppp_data) { -unsigned long rc; -unsigned long retbuf[PLPAR_HCALL9_BUFSIZE ]; +unsigned long retbuf[PLPAR_HCALL9_BUFSIZE ] = {0 }; +long rc; rc =plpar_hcall9 (H_GET_PPP , retbuf);
@@ -197,7 +197,7 @@ static void parse_ppp_data(struct seq_file *m)struct hvcall_ppp_data ppp_data;struct device_node *root;const __be32 *perf_level; -int rc; +long rc; rc =h_get_ppp (&ppp_data);if (rc)
--
2.39.3
Re: [PATCH v2 2/2] powerpc/pseries: Add failure related checks for h_get_mpp and h_get_ppp
Quoted 51 lines · Shrikanth Hegde
Couple of Minor fixes:
- hcall return values are long. Fix that for
h_get_mpp,h_get_pppandparse_ppp_data- If hcall fails, values set should be at-least zero. It shouldn't be uninitialized values. Fix that for
h_get_mppandh_get_pppSigned-off-by Shrikanth Hegde <[email protected]>--- arch/powerpc/include/asm/hvcall.h | 2 +- arch/powerpc/platforms/pseries/lpar.c | 6 +++--- arch/powerpc/platforms/pseries/lparcfg.c | 6 +++--- 3 files changed, 7 insertions(+), 7 deletions(-)arch/powerpc/include/asm/hvcall.h +1
-1@@ -570,7 +570,7 @@ struct hvcall_mpp_data {unsigned long backing_mem; }; -int h_get_mpp (struct hvcall_mpp_data *); +long h_get_mpp (struct hvcall_mpp_data *mpp_data);struct hvcall_mpp_x_data {unsigned long coalesced_bytes;arch/powerpc/platforms/pseries/lpar.c +3
-3@@ -1886,10 +1886,10 @@ notrace void __trace_hcall_exit(long opcode, long retval, unsigned long *retbuf)* h_get_mpp * H_GET_MPP hcall returns info in 7 parms */ -int h_get_mpp (struct hvcall_mpp_data *mpp_data) +long h_get_mpp (struct hvcall_mpp_data *mpp_data) { -int rc; -unsigned long retbuf[PLPAR_HCALL9_BUFSIZE ]; +unsigned long retbuf[PLPAR_HCALL9_BUFSIZE ] = {0 }; +long rc; rc =plpar_hcall9 (H_GET_MPP , retbuf);arch/powerpc/platforms/pseries/lparcfg.c +0
-0
arch/powerpc/platforms/pseries/lparcfg.c struct hvcall_ppp_data { · line 114
Quoted 2 lines
arch/powerpc/platforms/pseries/lparcfg.c +0
-0@@ -113,8 +113,8 @@ struct hvcall_ppp_data {*/ static unsigned int h_get_ppp (struct hvcall_ppp_data *ppp_data)
Hello,
Shouldn't the ^^^ return value also be long?
Thanks
Michal
Quoted 20 lines
arch/powerpc/platforms/pseries/lparcfg.c +3
-4{ -unsigned long rc; -unsigned long retbuf[PLPAR_HCALL9_BUFSIZE ]; +unsigned long retbuf[PLPAR_HCALL9_BUFSIZE ] = {0 }; +long rc; rc =plpar_hcall9 (H_GET_PPP , retbuf);@@ -197,7 +197,7 @@ static void parse_ppp_data(struct seq_file *m)struct hvcall_ppp_data ppp_data;struct device_node *root;const __be32 *perf_level; -int rc; +long rc; rc =h_get_ppp (&ppp_data);if (rc) --2.39.3
Shrikanth Hegde
reviewerRe: [PATCH v2 2/2] powerpc/pseries: Add failure related checks for h_get_mpp and h_get_ppp
Quoted 56 lines · Michal Suchánek
Quoted 51 lines · Shrikanth Hegde
Couple of Minor fixes:
- hcall return values are long. Fix that for
h_get_mpp,h_get_pppandparse_ppp_data- If hcall fails, values set should be at-least zero. It shouldn't be uninitialized values. Fix that for
h_get_mppandh_get_pppSigned-off-by Shrikanth Hegde <[email protected]>--- arch/powerpc/include/asm/hvcall.h | 2 +- arch/powerpc/platforms/pseries/lpar.c | 6 +++--- arch/powerpc/platforms/pseries/lparcfg.c | 6 +++--- 3 files changed, 7 insertions(+), 7 deletions(-)arch/powerpc/include/asm/hvcall.h +1
-1@@ -570,7 +570,7 @@ struct hvcall_mpp_data {unsigned long backing_mem; }; -int h_get_mpp (struct hvcall_mpp_data *); +long h_get_mpp (struct hvcall_mpp_data *mpp_data);struct hvcall_mpp_x_data {unsigned long coalesced_bytes;arch/powerpc/platforms/pseries/lpar.c +3
-3@@ -1886,10 +1886,10 @@ notrace void __trace_hcall_exit(long opcode, long retval, unsigned long *retbuf)* h_get_mpp * H_GET_MPP hcall returns info in 7 parms */ -int h_get_mpp (struct hvcall_mpp_data *mpp_data) +long h_get_mpp (struct hvcall_mpp_data *mpp_data) { -int rc; -unsigned long retbuf[PLPAR_HCALL9_BUFSIZE ]; +unsigned long retbuf[PLPAR_HCALL9_BUFSIZE ] = {0 }; +long rc; rc =plpar_hcall9 (H_GET_MPP , retbuf);arch/powerpc/platforms/pseries/lparcfg.c +0
-0arch/powerpc/platforms/pseries/lparcfg.c struct hvcall_ppp_data { · line 114
Quoted 2 lines
arch/powerpc/platforms/pseries/lparcfg.c +0
-0@@ -113,8 +113,8 @@ struct hvcall_ppp_data {*/ static unsigned int h_get_ppp (struct hvcall_ppp_data *ppp_data)Hello,
Quoted 4 lines
Shouldn't the ^^^ return value also be long?
Thanks
Yes. You are right. missed to notice that. Thanks for pointing it out.
There might be other places where similar pattern maybe there. Will fix it.
Quoted 21 lines
Michal
Quoted 20 lines
arch/powerpc/platforms/pseries/lparcfg.c +3
-4{ -unsigned long rc; -unsigned long retbuf[PLPAR_HCALL9_BUFSIZE ]; +unsigned long retbuf[PLPAR_HCALL9_BUFSIZE ] = {0 }; +long rc; rc =plpar_hcall9 (H_GET_PPP , retbuf);@@ -197,7 +197,7 @@ static void parse_ppp_data(struct seq_file *m)struct hvcall_ppp_data ppp_data;struct device_node *root;const __be32 *perf_level; -int rc; +long rc; rc =h_get_ppp (&ppp_data);if (rc) --2.39.3
Shrikanth Hegde
reviewerQuoted 21 lines · Shrikanth Hegde
Currently lparstat reports which shows since LPAR boot are wrong for some fields. There is a need for storing the PIC(Pool Idle Count) at boot for accurate reporting. PATCH 1 Does that.
While there, it was noticed that hcall return value is long and both
h_get_pppandh_get_mppcould set the uninitialized values if the hcall fails. PATCH 2 does that.v1 -> v2:
- Nathan pointed out the issues surrounding theh_piccall. Addressed those.
- Added apr_debugifh_picfails duringlparcfg_init
- Ifh_picfails while reading lparcfg, related files are not exported.
- Added failure checks forh_get_mpp,h_get_pppcalls as well.v1: https://lore.kernel.org/all/[email protected]/
Shrikanth Hegde (2):
powerpc/pseries: Add pool idle time at LPAR boot powerpc/pseries: Add fail related checks forh_get_mppandh_get_ppp
Quoted 8 lines
arch/powerpc/include/asm/hvcall.h | 2 +- arch/powerpc/platforms/pseries/lpar.c | 6 ++-- arch/powerpc/platforms/pseries/lparcfg.c | 45 +++++++++++++++++------- 3 files changed, 37 insertions(+), 16 deletions(-)--
2.39.3
Ping.
Michael, Nathan, Naveen
Any comments on these patches?
Michael Ellerman
reviewerQuoted 27 lines · Shrikanth Hegde
Quoted 26 lines · Shrikanth Hegde
Currently lparstat reports which shows since LPAR boot are wrong for some fields. There is a need for storing the PIC(Pool Idle Count) at boot for accurate reporting. PATCH 1 Does that.
While there, it was noticed that hcall return value is long and both
h_get_pppandh_get_mppcould set the uninitialized values if the hcall fails. PATCH 2 does that.v1 -> v2:
- Nathan pointed out the issues surrounding theh_piccall. Addressed those.
- Added apr_debugifh_picfails duringlparcfg_init
- Ifh_picfails while reading lparcfg, related files are not exported.
- Added failure checks forh_get_mpp,h_get_pppcalls as well.v1: https://lore.kernel.org/all/[email protected]/
Shrikanth Hegde (2):
powerpc/pseries: Add pool idle time at LPAR boot powerpc/pseries: Add fail related checks forh_get_mppandh_get_ppparch/powerpc/include/asm/hvcall.h | 2 +- arch/powerpc/platforms/pseries/lpar.c | 6 ++-- arch/powerpc/platforms/pseries/lparcfg.c | 45 +++++++++++++++++------- 3 files changed, 37 insertions(+), 16 deletions(-)
Quoted 8 lines
Quoted 3 lines
--
2.39.3Ping.
Michael, Nathan, Naveen
Any comments on these patches?
Looks fine. I have it in next-test, will probably go into next tomorrow.
cheers
Michael Ellerman
AppliedQuoted 9 lines · Shrikanth Hegde
Currently lparstat reports which shows since LPAR boot are wrong for some fields. There is a need for storing the PIC(Pool Idle Count) at boot for accurate reporting. PATCH 1 Does that.
While there, it was noticed that hcall return value is long and both
h_get_pppandh_get_mppcould set the uninitialized values if the hcall fails. PATCH 2 does that.[...]
Applied to powerpc/next.
[1/2] powerpc/pseries: Add pool idle time at LPAR boot
https://git.kernel.org/powerpc/c/9c74ecfd0fc46e2eaf92c1b6169cc0c8a87f1dc2 [2/2] powerpc/pseries: Add failure related checks for h_get_mpp and h_get_ppp https://git.kernel.org/powerpc/c/6d4341638516bf97b9a34947e0bd95035a8230a5
cheers