platform/x86: asus-wmi: add support for vivobook fan profiles
Luke D. Jones
maintainerPATCH 1/1 platform/x86: asus-wmi: add support for vivobook fan profiles
From: Mohamed Ghanmi <[email protected]>
Add support for vivobook fan profiles wmi call on the ASUS VIVOBOOK to adjust power limits.
These fan profiles have a different device id than the ROG series. and different order. This reorders the existing modes and adds a new full speed mode available on these laptops.
As part of keeping the patch clean the throttle_thermal_policy_available boolean stored in the driver struct is removed and throttle_thermal_policy_dev is used in place (as on init it is zeroed).
--- drivers/platform/x86/asus-wmi.c | 100 +++++++++++---------- include/linux/platform_data/x86/asus-wmi.h | 1 + 2 files changed, 55 insertions(+), 46 deletions(-)
drivers/platform/x86/asus-wmi.c +54 -46
@@ -97,6 +97,11 @@ module_param(fnlock_default, bool, 0444);#define ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST 1#define ASUS_THROTTLE_THERMAL_POLICY_SILENT 2 +#define ASUS_THROTTLE_THERMAL_POLICY_DEFAULT_VIVO 0 +#define ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST_VIVO 2 +#define ASUS_THROTTLE_THERMAL_POLICY_SILENT_VIVO 1 +#define ASUS_THROTTLE_THERMAL_POLICY_FULLSPEED 3 +#define USB_INTEL_XUSB2PR 0xD0#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI 0x9c31
@@ -285,8 +290,8 @@ struct asus_wmi {u32 kbd_rgb_dev;bool kbd_rgb_state_available; -bool throttle_thermal_policy_available;u8 throttle_thermal_policy_mode; +u32 throttle_thermal_policy_dev;bool cpu_fan_curve_available;bool gpu_fan_curve_available;
@@ -3153,7 +3158,7 @@ static int fan_curve_get_factory_default(struct asus_wmi *asus, u32 fan_dev)int err, fan_idx;u8 mode =0 ; -if (asus->throttle_thermal_policy_available) +if (asus->throttle_thermal_policy_dev) mode = asus->throttle_thermal_policy_mode;/* DEVID_<C/G>PU_FAN_CURVE is switched for OVERBOOST vs SILENT */ if (mode ==2 )
@@ -3360,7 +3365,7 @@ static ssize_t fan_curve_enable_store(struct device *dev,* For machines with throttle this is the only way to reset fans * to default mode of operation (does not erase curve data). */ -if (asus->throttle_thermal_policy_available) { +if (asus->throttle_thermal_policy_dev) { err =throttle_thermal_policy_write (asus);if (err)return err;
@@ -3577,8 +3582,8 @@ static const struct attribute_group asus_fan_curve_attr_group = {__ATTRIBUTE_GROUPS (asus_fan_curve_attr);/* -* Must be initialised after throttle_thermal_policy_check_present() as -* we check the status of throttle_thermal_policy_available during init. +* Must be initialised after throttle_thermal_policy_dev is set as +* we check the status of throttle_thermal_policy_dev during init. */ static int asus_wmi_custom_fan_curve_init (struct asus_wmi *asus) {
@@ -3619,38 +3624,31 @@ static int asus_wmi_custom_fan_curve_init(struct asus_wmi *asus) }/* Throttle thermal policy ****************************************************/ - -static int throttle_thermal_policy_check_present (struct asus_wmi *asus) -{ -u32 result; -int err; - - asus->throttle_thermal_policy_available = false; - - err =asus_wmi_get_devstate (asus, -ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY , - &result); -if (err) { -if (err == -ENODEV ) -return 0 ; -return err; - } - -if (result &ASUS_WMI_DSTS_PRESENCE_BIT ) - asus->throttle_thermal_policy_available = true; - -return 0 ; -} -static int throttle_thermal_policy_write (struct asus_wmi *asus) { -int err; -u8 value; +u8 value = asus->throttle_thermal_policy_mode;u32 retval; +bool vivo; +int err; - value = asus->throttle_thermal_policy_mode; + vivo = asus->throttle_thermal_policy_dev ==ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO ; +if (vivo) { +switch (value) { +case ASUS_THROTTLE_THERMAL_POLICY_DEFAULT : + value =ASUS_THROTTLE_THERMAL_POLICY_DEFAULT_VIVO ; +break ; +case ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST : + value =ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST_VIVO ; +break ; +case ASUS_THROTTLE_THERMAL_POLICY_SILENT : + value =ASUS_THROTTLE_THERMAL_POLICY_SILENT_VIVO ; +break ; +default : +break ; + } + } - err =asus_wmi_set_devstate (ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY , + err =asus_wmi_set_devstate (asus->throttle_thermal_policy_dev, value, &retval); sysfs_notify(&asus->platform_device->dev.kobj, NULL,
@@ -3680,7 +3678,7 @@ static int throttle_thermal_policy_write(struct asus_wmi *asus)static int throttle_thermal_policy_set_default (struct asus_wmi *asus) { -if (!asus->throttle_thermal_policy_available) +if (!asus->throttle_thermal_policy_dev)return 0 ; asus->throttle_thermal_policy_mode =ASUS_THROTTLE_THERMAL_POLICY_DEFAULT ;
@@ -3690,9 +3688,14 @@ static int throttle_thermal_policy_set_default(struct asus_wmi *asus)static int throttle_thermal_policy_switch_next (struct asus_wmi *asus) {u8 new_mode = asus->throttle_thermal_policy_mode +1 ; +bool vivo;int err; -if (new_mode >ASUS_THROTTLE_THERMAL_POLICY_SILENT ) + vivo = asus->throttle_thermal_policy_dev ==ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO ; +if (!vivo && new_mode >ASUS_THROTTLE_THERMAL_POLICY_SILENT ) + new_mode =ASUS_THROTTLE_THERMAL_POLICY_DEFAULT ; + +if (vivo && new_mode >ASUS_THROTTLE_THERMAL_POLICY_FULLSPEED ) new_mode =ASUS_THROTTLE_THERMAL_POLICY_DEFAULT ; asus->throttle_thermal_policy_mode = new_mode;
@@ -3725,13 +3728,17 @@ static ssize_t throttle_thermal_policy_store(struct device *dev,struct asus_wmi *asus =dev_get_drvdata (dev);u8 new_mode;int result; +bool vivo;int err; result =kstrtou8 (buf,10 , &new_mode);if (result <0 )return result; -if (new_mode >ASUS_THROTTLE_THERMAL_POLICY_SILENT ) + vivo = asus->throttle_thermal_policy_dev ==ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO ; +if (vivo && new_mode >ASUS_THROTTLE_THERMAL_POLICY_FULLSPEED ) +return -EINVAL ; +else if (!vivo && new_mode >ASUS_THROTTLE_THERMAL_POLICY_SILENT )return -EINVAL ; asus->throttle_thermal_policy_mode = new_mode;
@@ -3748,7 +3755,10 @@ static ssize_t throttle_thermal_policy_store(struct device *dev,return count; } -// Throttle thermal policy: 0 - default, 1 - overboost, 2 - silent +/* +* Throttle thermal policy: 0 - default, 1 - overboost, 2 - silent +* VIVOBOOK: 3 - fans full speed +*/ static DEVICE_ATTR_RW (throttle_thermal_policy);/* Platform profile ***********************************************************/
@@ -3814,7 +3824,7 @@ static int platform_profile_setup(struct asus_wmi *asus)* Not an error if a component platform_profile relies on is unavailable * so early return, skipping the setup of platform_profile. */ -if (!asus->throttle_thermal_policy_available) +if (!asus->throttle_thermal_policy_dev)return 0 ;dev_info (dev,"Using throttle_thermal_policy for platform_profile support\n" );
@@ -4229,7 +4239,7 @@ static void asus_wmi_handle_event_code(int code, struct asus_wmi *asus)if (code ==NOTIFY_KBD_FBM || code ==NOTIFY_KBD_TTP ) {if (asus->fan_boost_mode_available)fan_boost_mode_switch_next (asus); -if (asus->throttle_thermal_policy_available) +if (asus->throttle_thermal_policy_dev)throttle_thermal_policy_switch_next (asus);return ;
@@ -4401,7 +4411,7 @@ static umode_t asus_sysfs_is_visible(struct kobject *kobj,else if (attr == &dev_attr_fan_boost_mode.attr) ok = asus->fan_boost_mode_available;else if (attr == &dev_attr_throttle_thermal_policy.attr) - ok = asus->throttle_thermal_policy_available; + ok = asus->throttle_thermal_policy_dev !=0 ;else if (attr == &dev_attr_ppt_pl2_sppt.attr) devid =ASUS_WMI_DEVID_PPT_PL2_SPPT ;else if (attr == &dev_attr_ppt_pl1_spl.attr)
@@ -4693,16 +4703,15 @@ static int asus_wmi_add(struct platform_device *pdev)else if (asus_wmi_dev_is_present (asus,ASUS_WMI_DEVID_TUF_RGB_MODE2 )) asus->kbd_rgb_dev =ASUS_WMI_DEVID_TUF_RGB_MODE2 ; +if (asus_wmi_dev_is_present (asus,ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY )) + asus->throttle_thermal_policy_dev =ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY ; +else if (asus_wmi_dev_is_present (asus,ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO )) + asus->throttle_thermal_policy_dev =ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO ; + err =fan_boost_mode_check_present (asus);if (err) goto fail_fan_boost_mode; - err =throttle_thermal_policy_check_present (asus); -if (err) - goto fail_throttle_thermal_policy; -else -throttle_thermal_policy_set_default (asus); - err =platform_profile_setup (asus);if (err) goto fail_platform_profile_setup;
@@ -4797,7 +4806,6 @@ static int asus_wmi_add(struct platform_device *pdev) fail_input:asus_wmi_sysfs_exit (asus->platform_device); fail_sysfs: -fail_throttle_thermal_policy: fail_custom_fan_curve: fail_platform_profile_setup:if (asus->platform_profile_support)
include/linux/platform_data/x86/asus-wmi.h +1 -0
@@ -64,6 +64,7 @@#define ASUS_WMI_DEVID_SCREENPAD_LIGHT 0x00050032#define ASUS_WMI_DEVID_FAN_BOOST_MODE 0x00110018#define ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY 0x00120075 +#define ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO 0x00110019/* Misc */ #define ASUS_WMI_DEVID_PANEL_OD 0x00050019
Signature · 1 line
2.44.0
Ilpo Järvinen
maintainerQuoted 7 lines · Luke D. Jones
From: Mohamed Ghanmi <[email protected]>
Add support for vivobook fan profiles wmi call on the ASUS VIVOBOOK to adjust power limits.
These fan profiles have a different device id than the ROG series. and different order.
Fix grammar.
Quoted 20 lines
This reorders the existing modes and adds a new
full speed mode available on these laptops.As part of keeping the patch clean the
throttle_thermal_policy_availableboolean stored in the driver struct is removed andthrottle_thermal_policy_devis used in place (as on init it is zeroed).Signed-off-by Mohamed Ghanmi <[email protected]>Co-developed-by Luke D. Jones <[email protected]>Signed-off-by Luke D. Jones <[email protected]>--- drivers/platform/x86/asus-wmi.c | 100 +++++++++++---------- include/linux/platform_data/x86/asus-wmi.h | 1 + 2 files changed, 55 insertions(+), 46 deletions(-)drivers/platform/x86/asus-wmi.c +0
-0
drivers/platform/x86/asus-wmi.c module_param(fnlock_default, bool, 0444); · line 102
Quoted 6 lines
drivers/platform/x86/asus-wmi.c +3
-0@@ -97,6 +97,11 @@ module_param(fnlock_default, bool, 0444);#define ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST 1#define ASUS_THROTTLE_THERMAL_POLICY_SILENT 2 +#define ASUS_THROTTLE_THERMAL_POLICY_DEFAULT_VIVO 0 +#define ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST_VIVO 2 +#define ASUS_THROTTLE_THERMAL_POLICY_SILENT_VIVO 1
Any good reason why these are not in numerical order?
Quoted 116 lines
drivers/platform/x86/asus-wmi.c +28
-33+#define ASUS_THROTTLE_THERMAL_POLICY_FULLSPEED 3 +#define USB_INTEL_XUSB2PR 0xD0#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI 0x9c31@@ -285,8 +290,8 @@ struct asus_wmi {u32 kbd_rgb_dev;bool kbd_rgb_state_available; -bool throttle_thermal_policy_available;u8 throttle_thermal_policy_mode; +u32 throttle_thermal_policy_dev;bool cpu_fan_curve_available;bool gpu_fan_curve_available;@@ -3153,7 +3158,7 @@ static int fan_curve_get_factory_default(struct asus_wmi *asus, u32 fan_dev)int err, fan_idx;u8 mode =0 ; -if (asus->throttle_thermal_policy_available) +if (asus->throttle_thermal_policy_dev) mode = asus->throttle_thermal_policy_mode;/* DEVID_<C/G>PU_FAN_CURVE is switched for OVERBOOST vs SILENT */ if (mode ==2 )@@ -3360,7 +3365,7 @@ static ssize_t fan_curve_enable_store(struct device *dev,* For machines with throttle this is the only way to reset fans * to default mode of operation (does not erase curve data). */ -if (asus->throttle_thermal_policy_available) { +if (asus->throttle_thermal_policy_dev) { err =throttle_thermal_policy_write (asus);if (err)return err;@@ -3577,8 +3582,8 @@ static const struct attribute_group asus_fan_curve_attr_group = {__ATTRIBUTE_GROUPS (asus_fan_curve_attr);/* -* Must be initialised after throttle_thermal_policy_check_present() as -* we check the status of throttle_thermal_policy_available during init. +* Must be initialised after throttle_thermal_policy_dev is set as +* we check the status of throttle_thermal_policy_dev during init. */ static int asus_wmi_custom_fan_curve_init (struct asus_wmi *asus) {@@ -3619,38 +3624,31 @@ static int asus_wmi_custom_fan_curve_init(struct asus_wmi *asus) }/* Throttle thermal policy ****************************************************/ - -static int throttle_thermal_policy_check_present (struct asus_wmi *asus) -{ -u32 result; -int err; - - asus->throttle_thermal_policy_available = false; - - err =asus_wmi_get_devstate (asus, -ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY , - &result); -if (err) { -if (err == -ENODEV ) -return 0 ; -return err; - } - -if (result &ASUS_WMI_DSTS_PRESENCE_BIT ) - asus->throttle_thermal_policy_available = true; - -return 0 ; -} -static int throttle_thermal_policy_write (struct asus_wmi *asus) { -int err; -u8 value; +u8 value = asus->throttle_thermal_policy_mode;u32 retval; +bool vivo; +int err; - value = asus->throttle_thermal_policy_mode; + vivo = asus->throttle_thermal_policy_dev ==ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO ; +if (vivo) { +switch (value) { +case ASUS_THROTTLE_THERMAL_POLICY_DEFAULT : + value =ASUS_THROTTLE_THERMAL_POLICY_DEFAULT_VIVO ; +break ; +case ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST : + value =ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST_VIVO ; +break ; +case ASUS_THROTTLE_THERMAL_POLICY_SILENT : + value =ASUS_THROTTLE_THERMAL_POLICY_SILENT_VIVO ; +break ; +default : +break ; + } + } - err =asus_wmi_set_devstate (ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY , + err =asus_wmi_set_devstate (asus->throttle_thermal_policy_dev, value, &retval); sysfs_notify(&asus->platform_device->dev.kobj, NULL,@@ -3680,7 +3678,7 @@ static int throttle_thermal_policy_write(struct asus_wmi *asus)static int throttle_thermal_policy_set_default (struct asus_wmi *asus) { -if (!asus->throttle_thermal_policy_available) +if (!asus->throttle_thermal_policy_dev)return 0 ; asus->throttle_thermal_policy_mode =ASUS_THROTTLE_THERMAL_POLICY_DEFAULT ;@@ -3690,9 +3688,14 @@ static int throttle_thermal_policy_set_default(struct asus_wmi *asus)static int throttle_thermal_policy_switch_next (struct asus_wmi *asus) {u8 new_mode = asus->throttle_thermal_policy_mode +1 ;
drivers/platform/x86/asus-wmi.c static int throttle_thermal_policy_set_default(struct asus_wmi *asus) · line 3699
Quoted 10 lines
drivers/platform/x86/asus-wmi.c +6
-1+bool vivo;int err; -if (new_mode >ASUS_THROTTLE_THERMAL_POLICY_SILENT ) + vivo = asus->throttle_thermal_policy_dev ==ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO ; +if (!vivo && new_mode >ASUS_THROTTLE_THERMAL_POLICY_SILENT ) + new_mode =ASUS_THROTTLE_THERMAL_POLICY_DEFAULT ; + +if (vivo && new_mode >ASUS_THROTTLE_THERMAL_POLICY_FULLSPEED ) new_mode =ASUS_THROTTLE_THERMAL_POLICY_DEFAULT ;
Hmm, add a throttle_thermal_policy_max_mode() helper instead so you can do just this:
if (new_mode > throttle_thermal_policy_max_mode(...)) new_mode = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT;
Quoted 7 lines
drivers/platform/x86/asus-wmi.c +1
-0asus->throttle_thermal_policy_mode = new_mode;@@ -3725,13 +3728,17 @@ static ssize_t throttle_thermal_policy_store(struct device *dev,struct asus_wmi *asus =dev_get_drvdata (dev);u8 new_mode;int result; +bool vivo;int err;
drivers/platform/x86/asus-wmi.c static ssize_t throttle_thermal_policy_store(struct device *dev, · line 3741
Quoted 10 lines
drivers/platform/x86/asus-wmi.c +4
-1result =kstrtou8 (buf,10 , &new_mode);if (result <0 )return result; -if (new_mode >ASUS_THROTTLE_THERMAL_POLICY_SILENT ) + vivo = asus->throttle_thermal_policy_dev ==ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO ; +if (vivo && new_mode >ASUS_THROTTLE_THERMAL_POLICY_FULLSPEED ) +return -EINVAL ; +else if (!vivo && new_mode >ASUS_THROTTLE_THERMAL_POLICY_SILENT )
Use the throttle_thermal_policy_max_mode() helper here too.
Quoted 3 lines
drivers/platform/x86/asus-wmi.c +0
-0return -EINVAL ; asus->throttle_thermal_policy_mode = new_mode;
Signature · 1 line
i.
Quoted 4 lines · Ilpo Järvinen
Quoted 2 lines · Luke D. Jones
From: Mohamed Ghanmi <[email protected]>
Quoted 8 lines
Quoted 5 lines
Add support for vivobook fan profiles wmi call on the ASUS VIVOBOOK to adjust power limits.
These fan profiles have a different device id than the ROG series. and different order.
Fix grammar.
my grammar is not the greatest so i'm finding it hard to know what is the error you're referring to but I think that 'add' should become 'adds' ?
Quoted 23 lines
Quoted 23 lines
This reorders the existing modes and adds a new
full speed mode available on these laptops.As part of keeping the patch clean the
throttle_thermal_policy_availableboolean stored in the driver struct is removed andthrottle_thermal_policy_devis used in place (as on init it is zeroed).Signed-off-by Mohamed Ghanmi <[email protected]>Co-developed-by Luke D. Jones <[email protected]>Signed-off-by Luke D. Jones <[email protected]>--- drivers/platform/x86/asus-wmi.c | 100 +++++++++++---------- include/linux/platform_data/x86/asus-wmi.h | 1 + 2 files changed, 55 insertions(+), 46 deletions(-)drivers/platform/x86/asus-wmi.c +0
-0@@ -97,6 +97,11 @@ module_param(fnlock_default, bool, 0444);#define ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST 1#define ASUS_THROTTLE_THERMAL_POLICY_SILENT 2
Quoted 6 lines
drivers/platform/x86/asus-wmi.c module_param(fnlock_default, bool, 0444); · line 102
Quoted 3 lines
drivers/platform/x86/asus-wmi.c +3
-0+#define ASUS_THROTTLE_THERMAL_POLICY_DEFAULT_VIVO 0 +#define ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST_VIVO 2 +#define ASUS_THROTTLE_THERMAL_POLICY_SILENT_VIVO 1Any good reason why these are not in numerical order?
these are not in their numerical order but in their logical order
from the point of view of userspace both asus ROG devices and asus VIVOBOOK should behave the same: 0 -> default, 1 -> overboost, 2 -> silent.
I'll add a comment to better explain the reasons behind the order of the macros.
Quoted 130 lines
Quoted 116 lines
drivers/platform/x86/asus-wmi.c +28
-33+#define ASUS_THROTTLE_THERMAL_POLICY_FULLSPEED 3 +#define USB_INTEL_XUSB2PR 0xD0#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI 0x9c31@@ -285,8 +290,8 @@ struct asus_wmi {u32 kbd_rgb_dev;bool kbd_rgb_state_available; -bool throttle_thermal_policy_available;u8 throttle_thermal_policy_mode; +u32 throttle_thermal_policy_dev;bool cpu_fan_curve_available;bool gpu_fan_curve_available;@@ -3153,7 +3158,7 @@ static int fan_curve_get_factory_default(struct asus_wmi *asus, u32 fan_dev)int err, fan_idx;u8 mode =0 ; -if (asus->throttle_thermal_policy_available) +if (asus->throttle_thermal_policy_dev) mode = asus->throttle_thermal_policy_mode;/* DEVID_<C/G>PU_FAN_CURVE is switched for OVERBOOST vs SILENT */ if (mode ==2 )@@ -3360,7 +3365,7 @@ static ssize_t fan_curve_enable_store(struct device *dev,* For machines with throttle this is the only way to reset fans * to default mode of operation (does not erase curve data). */ -if (asus->throttle_thermal_policy_available) { +if (asus->throttle_thermal_policy_dev) { err =throttle_thermal_policy_write (asus);if (err)return err;@@ -3577,8 +3582,8 @@ static const struct attribute_group asus_fan_curve_attr_group = {__ATTRIBUTE_GROUPS (asus_fan_curve_attr);/* -* Must be initialised after throttle_thermal_policy_check_present() as -* we check the status of throttle_thermal_policy_available during init. +* Must be initialised after throttle_thermal_policy_dev is set as +* we check the status of throttle_thermal_policy_dev during init. */ static int asus_wmi_custom_fan_curve_init (struct asus_wmi *asus) {@@ -3619,38 +3624,31 @@ static int asus_wmi_custom_fan_curve_init(struct asus_wmi *asus) }/* Throttle thermal policy ****************************************************/ - -static int throttle_thermal_policy_check_present (struct asus_wmi *asus) -{ -u32 result; -int err; - - asus->throttle_thermal_policy_available = false; - - err =asus_wmi_get_devstate (asus, -ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY , - &result); -if (err) { -if (err == -ENODEV ) -return 0 ; -return err; - } - -if (result &ASUS_WMI_DSTS_PRESENCE_BIT ) - asus->throttle_thermal_policy_available = true; - -return 0 ; -} -static int throttle_thermal_policy_write (struct asus_wmi *asus) { -int err; -u8 value; +u8 value = asus->throttle_thermal_policy_mode;u32 retval; +bool vivo; +int err; - value = asus->throttle_thermal_policy_mode; + vivo = asus->throttle_thermal_policy_dev ==ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO ; +if (vivo) { +switch (value) { +case ASUS_THROTTLE_THERMAL_POLICY_DEFAULT : + value =ASUS_THROTTLE_THERMAL_POLICY_DEFAULT_VIVO ; +break ; +case ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST : + value =ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST_VIVO ; +break ; +case ASUS_THROTTLE_THERMAL_POLICY_SILENT : + value =ASUS_THROTTLE_THERMAL_POLICY_SILENT_VIVO ; +break ; +default : +break ; + } + } - err =asus_wmi_set_devstate (ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY , + err =asus_wmi_set_devstate (asus->throttle_thermal_policy_dev, value, &retval); sysfs_notify(&asus->platform_device->dev.kobj, NULL,@@ -3680,7 +3678,7 @@ static int throttle_thermal_policy_write(struct asus_wmi *asus)static int throttle_thermal_policy_set_default (struct asus_wmi *asus) { -if (!asus->throttle_thermal_policy_available) +if (!asus->throttle_thermal_policy_dev)return 0 ; asus->throttle_thermal_policy_mode =ASUS_THROTTLE_THERMAL_POLICY_DEFAULT ;@@ -3690,9 +3688,14 @@ static int throttle_thermal_policy_set_default(struct asus_wmi *asus)static int throttle_thermal_policy_switch_next (struct asus_wmi *asus) {u8 new_mode = asus->throttle_thermal_policy_mode +1 ;drivers/platform/x86/asus-wmi.c static int throttle_thermal_policy_set_default(struct asus_wmi *asus) · line 3699
Quoted 10 lines
drivers/platform/x86/asus-wmi.c +6
-1+bool vivo;int err; -if (new_mode >ASUS_THROTTLE_THERMAL_POLICY_SILENT ) + vivo = asus->throttle_thermal_policy_dev ==ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO ; +if (!vivo && new_mode >ASUS_THROTTLE_THERMAL_POLICY_SILENT ) + new_mode =ASUS_THROTTLE_THERMAL_POLICY_DEFAULT ; + +if (vivo && new_mode >ASUS_THROTTLE_THERMAL_POLICY_FULLSPEED ) new_mode =ASUS_THROTTLE_THERMAL_POLICY_DEFAULT ;Hmm, add a
throttle_thermal_policy_max_mode()helper instead so you can do just this:
Quoted 4 lines
if (new_mode > throttle_thermal_policy_max_mode(...)) new_mode = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT;
this is definitely better! i'll make the necessary changes in v1.
Quoted 12 lines
Quoted 12 lines
drivers/platform/x86/asus-wmi.c +1
-0asus->throttle_thermal_policy_mode = new_mode;@@ -3725,13 +3728,17 @@ static ssize_t throttle_thermal_policy_store(struct device *dev,struct asus_wmi *asus =dev_get_drvdata (dev);u8 new_mode;int result; +bool vivo;int err; result =kstrtou8 (buf,10 , &new_mode);if (result <0 )return result;
Quoted 8 lines
drivers/platform/x86/asus-wmi.c static ssize_t throttle_thermal_policy_store(struct device *dev, · line 3741
Quoted 5 lines
drivers/platform/x86/asus-wmi.c +4
-1-if (new_mode >ASUS_THROTTLE_THERMAL_POLICY_SILENT ) + vivo = asus->throttle_thermal_policy_dev ==ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO ; +if (vivo && new_mode >ASUS_THROTTLE_THERMAL_POLICY_FULLSPEED ) +return -EINVAL ; +else if (!vivo && new_mode >ASUS_THROTTLE_THERMAL_POLICY_SILENT )Use the
throttle_thermal_policy_max_mode()helper here too.
i'll do the appropriate changes here too.
Quoted 7 lines
Quoted 3 lines
drivers/platform/x86/asus-wmi.c +0
-0return -EINVAL ; asus->throttle_thermal_policy_mode = new_mode;Signature · 1 line
i.
thank you for your time.
Ilpo Järvinen
maintainerQuoted 11 lines · Mohamed Ghanmi
Quoted 8 lines · Ilpo Järvinen
Quoted 6 lines · Luke D. Jones
From: Mohamed Ghanmi <[email protected]>
Add support for vivobook fan profiles wmi call on the ASUS VIVOBOOK to adjust power limits.
These fan profiles have a different device id than the ROG series.
Quoted 7 lines
Quoted 3 lines
Quoted 1 line
and different order.
Fix grammar.
my grammar is not the greatest so i'm finding it hard to know what is the error you're referring to but I think that 'add' should become 'adds' ?
That's not what I was referring to, you've a dangling/broken "sentence" right in front of my reply:
"and different order."
Please fix that. Perhaps you just want to remove the stop (".") from the previous sentence to join the sentences together?
Signature · 1 line
i.