Wave515 decoder IP support
Subsystems (2)
v4 cover Wave515 decoder IP support
Initial support for Wave515 multi-decoder IP among other refinements. This was tested on FPGA prototype, so wave5_dt_ids[] was not expanded.
fluster score for JCT-VC-HEVC_V1 testsuite with
GStreamer-H.265-V4L2-Gst1.0 decoder is 132/147
The issue with Main10 tests is that fluster expects decoded file to be in yuv420p10le format while this driver decodes HEVC Main10 into 8-bit yuv420p. Though result is looks alright to the naked eye, proper decoding into yuv420p10le is to be added.
The rest failed fluster tests are common with Wave521.
ChangeLog:
v1:
https://lore.kernel.org/linux-media/[email protected]/
v2:
https://lore.kernel.org/linux-media/[email protected]/
* drop patch "dt-bindings: media: cnm,wave521c: drop resets restriction" The only user of Wave5 in mainline is TI K3 boards, thus there is no real need to alter dt-bindings
* in patch "media: chips-media: wave5: support decoding HEVC Main10 profile" add check for flag "support_hevc10bit_dec"
* in patch "media: chips-media: wave5: support reset lines" move reset_control_deassert() out of else branch, add reset_control_assert() to probe error path.
* rework patch "media: chips-media: wave5: drop "sram-size" DT prop"
- don't move alloc/free form device open/close
- intead of exact configuration of reserved SRAM memory in DT and allocating all of it, allocate all available SRAM memory up to WAVE5_MAX_SRAM_SIZE from whatever pool provided.
* adjust patch "media: chips-media: wave5: support Wave515 decoder" according to changes in patches
"media: chips-media: wave5: support decoding HEVC Main10 profile" and "media: chips-media: wave5: drop "sram-size" DT prop"
v3:
https://lore.kernel.org/linux-media/[email protected]/
* reword patch "media: chips-media: wave5: separate irq setup routine" a bit.
* in patch "media: chips-media: wave5: drop "sram-size" DT prop"
- move MAX_SRAM_SIZE define into match_data->sram_size
- add placeholders for validation that allocated SRAM memory is enough to encode/decode bitstream of given resolution before setting W5_USE_SEC_AXI and W5_CMD_ENC_PIC_USE_SEC_AXI registers
- reword accordingly
* in patch "media: chips-media: wave5: support Wave515 decoder"
- add comments around SRAM memory allocation/freeing about Wave515 specifics
- add comments about BSOPTION_RD_PTR_VALID_FLAG bit in W5_BS_OPTION register
- add W[AVE]521_ prefix to defines, for wich there are W[AVE]515_ alternatieves
- add semi-magic Wave515 specific formulas to estimate SRAM usage
v4:
* rebase onto next-20240415, no functional changes
Ivan Bornyakov (5):
media: chips-media: wave5: support decoding HEVC Main10 profile
media: chips-media: wave5: support reset lines
media: chips-media: wave5: separate irq setup routine
media: chips-media: wave5: drop "sram-size" DT prop
media: chips-media: wave5: support Wave515 decoder
.../platform/chips-media/wave5/wave5-helper.c | 8 +- .../platform/chips-media/wave5/wave5-hw.c | 395 +++++++++++++----- .../chips-media/wave5/wave5-regdefine.h | 5 + .../platform/chips-media/wave5/wave5-vdi.c | 27 +- .../chips-media/wave5/wave5-vpu-dec.c | 51 ++- .../chips-media/wave5/wave5-vpu-enc.c | 2 +- .../platform/chips-media/wave5/wave5-vpu.c | 35 +- .../platform/chips-media/wave5/wave5-vpuapi.h | 3 + .../chips-media/wave5/wave5-vpuconfig.h | 16 +- .../media/platform/chips-media/wave5/wave5.h | 6 + 10 files changed, 407 insertions(+), 141 deletions(-)
Signature · 1 line
2.44.0
PATCH v4 1/5 media: chips-media: wave5: support decoding HEVC Main10 profile
Add support for decoding HEVC Main10 profile by scaling FBC buffer stride and size by the factor of (bitdepth / 8).
--- .../chips-media/wave5/wave5-vpu-dec.c | 30 +++++++++++-------- .../platform/chips-media/wave5/wave5-vpuapi.h | 1 + 2 files changed, 18 insertions(+), 13 deletions(-)
drivers/media/platform/chips-media/wave5/wave5-vpu-dec.c +17 -13
@@ -1055,6 +1055,22 @@ static int wave5_prepare_fb(struct vpu_instance *inst)int ret, i;struct v4l2_m2m_buffer *buf, *n;struct v4l2_m2m_ctx *m2m_ctx = inst->v4l2_fh.m2m_ctx; +u32 bitdepth = inst->codec_info->dec_info.initial_info.luma_bitdepth; + +switch (bitdepth) { +case 8 : +break ; +case 10 : +if (inst->std ==W_HEVC_DEC && + inst->dev->attr.support_hevc10bit_dec) +break ; + + fallthrough; +default : +dev_err (inst->dev->dev,"no support for %d bit depth\n" , bitdepth); + +return -EINVAL ; + } linear_num =v4l2_m2m_num_dst_bufs_ready (m2m_ctx); non_linear_num = inst->fbc_buf_count;
@@ -1063,7 +1079,7 @@ static int wave5_prepare_fb(struct vpu_instance *inst)struct frame_buffer *frame = &inst->frame_buf[i];struct vpu_buf *vframe = &inst->frame_vbuf[i]; - fb_stride = inst->dst_fmt.width; + fb_stride =ALIGN (inst->dst_fmt.width * bitdepth /8 ,32 ); fb_height =ALIGN (inst->dst_fmt.height,32 ); luma_size = fb_stride * fb_height;
@@ -1408,22 +1424,10 @@ static int wave5_vpu_dec_start_streaming(struct vb2_queue *q, unsigned int countif (ret) goto free_bitstream_vbuf; }else if (q->type ==V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE ) { -struct dec_initial_info *initial_info = - &inst->codec_info->dec_info.initial_info; -if (inst->state ==VPU_INST_STATE_STOP ) ret =switch_state (inst,VPU_INST_STATE_INIT_SEQ );if (ret) goto return_buffers; - -if (inst->state ==VPU_INST_STATE_INIT_SEQ ) { -if (initial_info->luma_bitdepth !=8 ) { -dev_info (inst->dev->dev,"%s: no support for %d bit depth" , - __func__, initial_info->luma_bitdepth); - ret = -EINVAL ; - goto return_buffers; - } - } }return ret;
drivers/media/platform/chips-media/wave5/wave5-vpuapi.h +1 -0
@@ -327,6 +327,7 @@ struct vpu_attr { u32 support_backbone: 1; u32 support_avc10bit_enc: 1; u32 support_hevc10bit_enc: 1; + u32 support_hevc10bit_dec: 1; u32 support_vcore_backbone: 1; u32 support_vcpu_backbone: 1; };
Signature · 1 line
2.44.0
PATCH v4 2/5 media: chips-media: wave5: support reset lines
In reply to Ivan BornyakovAdd initial support for optional reset lines. For now, simply deassert resets on driver probe and assert them back on driver remove.
--- .../media/platform/chips-media/wave5/wave5-vpu.c | 16 +++++++++++++++- .../platform/chips-media/wave5/wave5-vpuapi.h | 1 + 2 files changed, 16 insertions(+), 1 deletion(-)
drivers/media/platform/chips-media/wave5/wave5-vpu.c +15 -1
@@ -10,6 +10,7 @@#include <linux/clk.h> #include <linux/firmware.h> #include <linux/interrupt.h> +#include <linux/reset.h> #include "wave5-vpu.h" #include "wave5-regdefine.h" #include "wave5-vpuconfig.h"
@@ -179,6 +180,16 @@ static int wave5_vpu_probe(struct platform_device *pdev)dev_set_drvdata (&pdev->dev, dev); dev->dev = &pdev->dev; + dev->resets =devm_reset_control_array_get_optional_exclusive (&pdev->dev); +if (IS_ERR (dev->resets)) { +return dev_err_probe (&pdev->dev,PTR_ERR (dev->resets), +"Failed to get reset control\n" ); + } + + ret =reset_control_deassert (dev->resets); +if (ret) +return dev_err_probe (&pdev->dev, ret,"Failed to deassert resets\n" ); + ret =devm_clk_bulk_get_all (&pdev->dev, &dev->clks);/* continue without clock, assume externally managed */
@@ -191,7 +202,7 @@ static int wave5_vpu_probe(struct platform_device *pdev) ret =clk_bulk_prepare_enable (dev->num_clks, dev->clks);if (ret) {dev_err (&pdev->dev,"Enabling clocks, fail: %d\n" , ret); -return ret; + goto err_reset_assert; } ret = of_property_read_u32(pdev->dev.of_node, "sram-size",
@@ -282,6 +293,8 @@ static int wave5_vpu_probe(struct platform_device *pdev)wave5_vdi_release (&pdev->dev); err_clk_dis:clk_bulk_disable_unprepare (dev->num_clks, dev->clks); +err_reset_assert: +reset_control_assert (dev->resets);return ret; }
@@ -297,6 +310,7 @@ static void wave5_vpu_remove(struct platform_device *pdev)mutex_destroy (&dev->dev_lock);mutex_destroy (&dev->hw_lock); +reset_control_assert (dev->resets);clk_bulk_disable_unprepare (dev->num_clks, dev->clks);wave5_vpu_enc_unregister_device (dev);wave5_vpu_dec_unregister_device (dev);
drivers/media/platform/chips-media/wave5/wave5-vpuapi.h +1 -0
@@ -762,6 +762,7 @@ struct vpu_device {struct kthread_worker *worker;int vpu_poll_interval;int num_clks; +struct reset_control *resets; };struct vpu_instance ;
Signature · 1 line
2.44.0
PATCH v4 3/5 media: chips-media: wave5: separate irq setup routine
In reply to Ivan BornyakovImplement a separate setup routine for interrupts to reduce code duplication. Also enable interrupts based on vpu_attr->support_encoders and vpu_attr->support_decoders fields to facilitate support for other Wave5xx IPs, because not all of them are both encoders and decoders.
--- .../platform/chips-media/wave5/wave5-hw.c | 53 +++++++++---------- 1 file changed, 24 insertions(+), 29 deletions(-)
drivers/media/platform/chips-media/wave5/wave5-hw.c +24 -29
@@ -299,6 +299,27 @@ static int wave5_send_query(struct vpu_device *vpu_dev, struct vpu_instance *insreturn wave5_vpu_firmware_command_queue_error_check (vpu_dev,NULL ); } +static void setup_wave5_interrupts (struct vpu_device *vpu_dev) +{ +u32 reg_val =0 ; + +if (vpu_dev->attr.support_encoders) { +/* Encoder interrupt */ + reg_val |=BIT (INT_WAVE5_ENC_SET_PARAM ); + reg_val |=BIT (INT_WAVE5_ENC_PIC ); + reg_val |=BIT (INT_WAVE5_BSBUF_FULL ); + } + +if (vpu_dev->attr.support_decoders) { +/* Decoder interrupt */ + reg_val |=BIT (INT_WAVE5_INIT_SEQ ); + reg_val |=BIT (INT_WAVE5_DEC_PIC ); + reg_val |=BIT (INT_WAVE5_BSBUF_EMPTY ); + } + +return vpu_write_reg (vpu_dev,W5_VPU_VINT_ENABLE , reg_val); +} +static int setup_wave5_properties (struct device *dev) {struct vpu_device *vpu_dev =dev_get_drvdata (dev);
@@ -340,6 +361,8 @@ static int setup_wave5_properties(struct device *dev) p_attr->support_vcpu_backbone =FIELD_GET (FEATURE_VCPU_BACKBONE , hw_config_def0); p_attr->support_vcore_backbone =FIELD_GET (FEATURE_VCORE_BACKBONE , hw_config_def0); +setup_wave5_interrupts (vpu_dev); +return 0 ; }
@@ -417,16 +440,6 @@ int wave5_vpu_init(struct device *dev, u8 *fw, size_t size)wave5_fio_writel (vpu_dev,W5_BACKBONE_AXI_PARAM ,0 );vpu_write_reg (vpu_dev,W5_SEC_AXI_PARAM ,0 ); -/* Encoder interrupt */ - reg_val =BIT (INT_WAVE5_ENC_SET_PARAM ); - reg_val |=BIT (INT_WAVE5_ENC_PIC ); - reg_val |=BIT (INT_WAVE5_BSBUF_FULL ); -/* Decoder interrupt */ - reg_val |=BIT (INT_WAVE5_INIT_SEQ ); - reg_val |=BIT (INT_WAVE5_DEC_PIC ); - reg_val |=BIT (INT_WAVE5_BSBUF_EMPTY ); -vpu_write_reg (vpu_dev,W5_VPU_VINT_ENABLE , reg_val); - reg_val =vpu_read_reg (vpu_dev,W5_VPU_RET_VPU_CONFIG0 );if (FIELD_GET (FEATURE_BACKBONE , reg_val)) { reg_val = ((WAVE5_PROC_AXI_ID << 28) |
@@ -1034,16 +1047,6 @@ int wave5_vpu_re_init(struct device *dev, u8 *fw, size_t size)wave5_fio_writel (vpu_dev,W5_BACKBONE_AXI_PARAM ,0 );vpu_write_reg (vpu_dev,W5_SEC_AXI_PARAM ,0 ); -/* Encoder interrupt */ - reg_val =BIT (INT_WAVE5_ENC_SET_PARAM ); - reg_val |=BIT (INT_WAVE5_ENC_PIC ); - reg_val |=BIT (INT_WAVE5_BSBUF_FULL ); -/* Decoder interrupt */ - reg_val |=BIT (INT_WAVE5_INIT_SEQ ); - reg_val |=BIT (INT_WAVE5_DEC_PIC ); - reg_val |=BIT (INT_WAVE5_BSBUF_EMPTY ); -vpu_write_reg (vpu_dev,W5_VPU_VINT_ENABLE , reg_val); - reg_val =vpu_read_reg (vpu_dev,W5_VPU_RET_VPU_CONFIG0 );if (FIELD_GET (FEATURE_BACKBONE , reg_val)) { reg_val = ((WAVE5_PROC_AXI_ID << 28) |
@@ -1134,15 +1137,7 @@ static int wave5_vpu_sleep_wake(struct device *dev, bool i_sleep_wake, const uinwave5_fio_writel (vpu_dev,W5_BACKBONE_AXI_PARAM ,0 );vpu_write_reg (vpu_dev,W5_SEC_AXI_PARAM ,0 ); -/* Encoder interrupt */ - reg_val =BIT (INT_WAVE5_ENC_SET_PARAM ); - reg_val |=BIT (INT_WAVE5_ENC_PIC ); - reg_val |=BIT (INT_WAVE5_BSBUF_FULL ); -/* Decoder interrupt */ - reg_val |=BIT (INT_WAVE5_INIT_SEQ ); - reg_val |=BIT (INT_WAVE5_DEC_PIC ); - reg_val |=BIT (INT_WAVE5_BSBUF_EMPTY ); -vpu_write_reg (vpu_dev,W5_VPU_VINT_ENABLE , reg_val); +setup_wave5_interrupts (vpu_dev); reg_val =vpu_read_reg (vpu_dev,W5_VPU_RET_VPU_CONFIG0 );if (FIELD_GET (FEATURE_BACKBONE , reg_val)) {
Signature · 1 line
2.44.0
PATCH v4 4/5 media: chips-media: wave5: drop "sram-size" DT prop
In reply to Ivan BornyakovMove excessive "sram-size" device-tree property to device match data. Also change SRAM memory allocation strategy: instead of allocation exact sram_size bytes, allocate all available SRAM memory up to sram_size. Add placeholders wave5_vpu_dec_validate_sec_axi() and wave5_vpu_enc_validate_sec_axi() for validation that allocated SRAM memory is enough to decode/encode bitstream of given resolution.
--- .../platform/chips-media/wave5/wave5-hw.c | 62 +++++++++++++++++-- .../platform/chips-media/wave5/wave5-vdi.c | 21 ++++--- .../platform/chips-media/wave5/wave5-vpu.c | 11 ++-- 3 files changed, 72 insertions(+), 22 deletions(-)
drivers/media/platform/chips-media/wave5/wave5-hw.c +57 -5
@@ -843,6 +843,36 @@ int wave5_vpu_dec_register_framebuffer(struct vpu_instance *inst, struct frame_breturn ret; } +static u32 wave5_vpu_dec_validate_sec_axi (struct vpu_instance *inst) +{ +struct dec_info *p_dec_info = &inst->codec_info->dec_info; +u32 bit_size =0 , ip_size =0 , lf_size =0 , ret =0 ; +u32 sram_size = inst->dev->sram_size; + +if (!sram_size) +return 0 ; + +/* +* TODO: calculate bit_size, ip_size, lf_size from inst->src_fmt.width +* and inst->codec_info->dec_info.initial_info.luma_bitdepth +*/ + +if (p_dec_info->sec_axi_info.use_bit_enable && sram_size >= bit_size) { + ret |=BIT (0 ); + sram_size -= bit_size; + } + +if (p_dec_info->sec_axi_info.use_ip_enable && sram_size >= ip_size) { + ret |=BIT (9 ); + sram_size -= ip_size; + } + +if (p_dec_info->sec_axi_info.use_lf_row_enable && sram_size >= lf_size) + ret |=BIT (15 ); + +return ret; +} +int wave5_vpu_decode (struct vpu_instance *inst,u32 *fail_res) {u32 reg_val;
@@ -855,9 +885,7 @@ int wave5_vpu_decode(struct vpu_instance *inst, u32 *fail_res)vpu_write_reg (inst->dev,W5_BS_OPTION ,get_bitstream_options (p_dec_info));/* secondary AXI */ - reg_val = p_dec_info->sec_axi_info.use_bit_enable | - (p_dec_info->sec_axi_info.use_ip_enable <<9 ) | - (p_dec_info->sec_axi_info.use_lf_row_enable <<15 ); + reg_val =wave5_vpu_dec_validate_sec_axi (inst);vpu_write_reg (inst->dev,W5_USE_SEC_AXI , reg_val);/* set attributes of user buffer */
@@ -1938,6 +1966,31 @@ int wave5_vpu_enc_register_framebuffer(struct device *dev, struct vpu_instance *return ret; } +static u32 wave5_vpu_enc_validate_sec_axi (struct vpu_instance *inst) +{ +struct enc_info *p_enc_info = &inst->codec_info->enc_info; +u32 rdo_size =0 , lf_size =0 , ret =0 ; +u32 sram_size = inst->dev->sram_size; + +if (!sram_size) +return 0 ; + +/* +* TODO: calculate rdo_size and lf_size from inst->src_fmt.width and +* inst->codec_info->enc_info.open_param.wave_param.internal_bit_depth +*/ + +if (p_enc_info->sec_axi_info.use_enc_rdo_enable && sram_size >= rdo_size) { + ret |=BIT (11 ); + sram_size -= rdo_size; + } + +if (p_enc_info->sec_axi_info.use_enc_lf_enable && sram_size >= lf_size) + ret |=BIT (15 ); + +return ret; +} +int wave5_vpu_encode (struct vpu_instance *inst,struct enc_param *option,u32 *fail_res) {u32 src_frame_format;
@@ -1959,8 +2012,7 @@ int wave5_vpu_encode(struct vpu_instance *inst, struct enc_param *option, u32 *fvpu_write_reg (inst->dev,W5_CMD_ENC_PIC_SRC_AXI_SEL ,DEFAULT_SRC_AXI );/* secondary AXI */ - reg_val = (p_enc_info->sec_axi_info.use_enc_rdo_enable <<11 ) | - (p_enc_info->sec_axi_info.use_enc_lf_enable <<15 ); + reg_val =wave5_vpu_enc_validate_sec_axi (inst);vpu_write_reg (inst->dev,W5_CMD_ENC_PIC_USE_SEC_AXI , reg_val);vpu_write_reg (inst->dev,W5_CMD_ENC_PIC_REPORT_PARAM ,0 );
drivers/media/platform/chips-media/wave5/wave5-vdi.c +11 -10
@@ -174,16 +174,19 @@ int wave5_vdi_allocate_array(struct vpu_device *vpu_dev, struct vpu_buf *array,void wave5_vdi_allocate_sram (struct vpu_device *vpu_dev) {struct vpu_buf *vb = &vpu_dev->sram_buf; +dma_addr_t daddr; +void *vaddr; +size_t size; -if (!vpu_dev->sram_pool || !vpu_dev->sram_size) +if (!vpu_dev->sram_pool || vb->vaddr)return ; -if (!vb->vaddr) { - vb->size = vpu_dev->sram_size; - vb->vaddr =gen_pool_dma_alloc (vpu_dev->sram_pool, vb->size, - &vb->daddr); -if (!vb->vaddr) - vb->size =0 ; + size =min_t (size_t, vpu_dev->sram_size,gen_pool_avail (vpu_dev->sram_pool)); + vaddr =gen_pool_dma_alloc (vpu_dev->sram_pool, size, &daddr); +if (vaddr) { + vb->vaddr = vaddr; + vb->daddr = daddr; + vb->size = size; } dev_dbg(vpu_dev->dev, "%s: sram daddr: %pad, size: %zu, vaddr: 0x%p\n",
@@ -197,9 +200,7 @@ void wave5_vdi_free_sram(struct vpu_device *vpu_dev)if (!vb->size || !vb->vaddr)return ; -if (vb->vaddr) -gen_pool_free (vpu_dev->sram_pool, (unsigned long )vb->vaddr, - vb->size); +gen_pool_free (vpu_dev->sram_pool, (unsigned long )vb->vaddr, vb->size);memset (vb,0 ,sizeof (*vb)); }
drivers/media/platform/chips-media/wave5/wave5-vpu.c +4 -7
@@ -25,6 +25,7 @@struct wave5_match_data {int flags;const char *fw_name; +u32 sram_size; };static int vpu_poll_interval =5 ;
@@ -205,17 +206,12 @@ static int wave5_vpu_probe(struct platform_device *pdev) goto err_reset_assert; } - ret =of_property_read_u32 (pdev->dev.of_node,"sram-size" , - &dev->sram_size); -if (ret) { -dev_warn (&pdev->dev,"sram-size not found\n" ); - dev->sram_size =0 ; - } - dev->sram_pool =of_gen_pool_get (pdev->dev.of_node,"sram" ,0 );if (!dev->sram_pool)dev_warn (&pdev->dev,"sram node not found\n" ); + dev->sram_size = match_data->sram_size; + dev->product_code =wave5_vdi_read_register (dev,VPU_PRODUCT_CODE_REGISTER ); ret =wave5_vdi_init (&pdev->dev);if (ret <0 ) {
@@ -322,6 +318,7 @@ static void wave5_vpu_remove(struct platform_device *pdev)static const struct wave5_match_data ti_wave521c_data = { .flags =WAVE5_IS_ENC |WAVE5_IS_DEC , .fw_name ="cnm/wave521c_k3_codec_fw.bin" , + .sram_size = (64 *1024 ), };static const struct of_device_id wave5_dt_ids[] = {
Signature · 1 line
2.44.0
PATCH v4 5/5 media: chips-media: wave5: support Wave515 decoder
In reply to Ivan BornyakovAdd initial support for Wave515 multi-decoder IP. For now it is only able to decode HEVC Main/Main10 profile videos into YUV420.
This was tested on FPGA prototype, so wave5_dt_ids[] was not expanded. Users of the real hardware with Wave515 IP will have to
* provide firmware specific to their SoC
* add struct wave5_match_data like this:
static const struct wave5_match_data platform_name_wave515_data = {
.flags = WAVE5_IS_DEC,
.fw_name = "cnm/wave515_platform_name_fw.bin",
.sram_size = (71 * 1024),
};* add item to wave5_dt_ids[] like this:
{
.compatible = "vendor,soc-wave515",
.data = &platform_name_wave515_data,
}, * describe new compatible in Documentation/devicetree/bindings/media/cnm,wave521c.yaml
--- .../platform/chips-media/wave5/wave5-helper.c | 8 +- .../platform/chips-media/wave5/wave5-hw.c | 286 +++++++++++++----- .../chips-media/wave5/wave5-regdefine.h | 5 + .../platform/chips-media/wave5/wave5-vdi.c | 6 +- .../chips-media/wave5/wave5-vpu-dec.c | 21 +- .../chips-media/wave5/wave5-vpu-enc.c | 2 +- .../platform/chips-media/wave5/wave5-vpu.c | 8 +- .../platform/chips-media/wave5/wave5-vpuapi.h | 1 + .../chips-media/wave5/wave5-vpuconfig.h | 16 +- .../media/platform/chips-media/wave5/wave5.h | 6 + 10 files changed, 280 insertions(+), 79 deletions(-)
drivers/media/platform/chips-media/wave5/wave5-helper.c +7 -1
@@ -29,7 +29,13 @@ void wave5_cleanup_instance(struct vpu_instance *inst) {int i; -if (list_is_singular (&inst->list)) +/* +* For Wave515 SRAM memory is allocated at +* wave5_vpu_dec_register_device() and freed at +* wave5_vpu_dec_unregister_device(). +*/ +if (list_is_singular (&inst->list) && + inst->dev->product_code !=WAVE515_CODE )wave5_vdi_free_sram (inst->dev);for (i =0 ; i < inst->fbc_buf_count; i++)
drivers/media/platform/chips-media/wave5/wave5-hw.c +217 -69
470 lines not on this page · raw message
drivers/media/platform/chips-media/wave5/wave5-regdefine.h +5 -0
@@ -205,6 +205,9 @@ enum query_opt {#define W5_ADDR_TEMP_BASE (W5_REG_BASE + 0x011C)#define W5_TEMP_SIZE (W5_REG_BASE + 0x0120)#define W5_HW_OPTION (W5_REG_BASE + 0x012C) +#define W5_CMD_INIT_NUM_TASK_BUF (W5_REG_BASE + 0x0134) +#define W5_CMD_INIT_ADDR_TASK_BUF0 (W5_REG_BASE + 0x0138) +#define W5_CMD_INIT_TASK_BUF_SIZE (W5_REG_BASE + 0x0178)#define W5_SEC_AXI_PARAM (W5_REG_BASE + 0x0180)/************************************************************************/
@@ -216,7 +219,9 @@ enum query_opt {#define W5_CMD_DEC_BS_SIZE (W5_REG_BASE + 0x0120)#define W5_CMD_BS_PARAM (W5_REG_BASE + 0x0124)#define W5_CMD_ADDR_SEC_AXI (W5_REG_BASE + 0x0130) +#define W515_CMD_ADDR_SEC_AXI (W5_REG_BASE + 0x0124)#define W5_CMD_SEC_AXI_SIZE (W5_REG_BASE + 0x0134) +#define W515_CMD_SEC_AXI_SIZE (W5_REG_BASE + 0x0128)#define W5_CMD_EXT_ADDR (W5_REG_BASE + 0x0138)#define W5_CMD_NUM_CQ_DEPTH_M1 (W5_REG_BASE + 0x013C)#define W5_CMD_ERR_CONCEAL (W5_REG_BASE + 0x0140)
drivers/media/platform/chips-media/wave5/wave5-vdi.c +5 -1
@@ -18,7 +18,11 @@ static int wave5_vdi_allocate_common_memory(struct device *dev)if (!vpu_dev->common_mem.vaddr) {int ret; - vpu_dev->common_mem.size =SIZE_COMMON ; +if (vpu_dev->product_code ==WAVE515_CODE ) + vpu_dev->common_mem.size =WAVE515_SIZE_COMMON ; +else + vpu_dev->common_mem.size =WAVE521_SIZE_COMMON ; + ret =wave5_vdi_allocate_dma_memory (vpu_dev, &vpu_dev->common_mem);if (ret) {dev_err (dev,"unable to allocate common buffer\n" );
drivers/media/platform/chips-media/wave5/wave5-vpu-dec.c +20 -1
@@ -1868,7 +1868,12 @@ static int wave5_vpu_open_dec(struct file *filp) goto cleanup_inst; } -wave5_vdi_allocate_sram (inst->dev); +/* +* For Wave515 SRAM memory was already allocated +* at wave5_vpu_dec_register_device() +*/ +if (inst->dev->product_code !=WAVE515_CODE ) +wave5_vdi_allocate_sram (inst->dev); ret =mutex_lock_interruptible (&dev->dev_lock);if (ret)
@@ -1908,6 +1913,13 @@ int wave5_vpu_dec_register_device(struct vpu_device *dev)struct video_device *vdev_dec;int ret; +/* +* Secondary AXI setup for Wave515 is done by INIT_VPU command, +* i.e. wave5_vpu_init(), that's why we allocate SRAM memory early. +*/ +if (dev->product_code ==WAVE515_CODE ) +wave5_vdi_allocate_sram (dev); + vdev_dec =devm_kzalloc (dev->v4l2_dev.dev,sizeof (*vdev_dec),GFP_KERNEL );if (!vdev_dec)return -ENOMEM ;
@@ -1941,6 +1953,13 @@ int wave5_vpu_dec_register_device(struct vpu_device *dev)void wave5_vpu_dec_unregister_device (struct vpu_device *dev) { +/* +* Here is a freeing pair for Wave515 SRAM memory allocation +* happened at wave5_vpu_dec_register_device(). +*/ +if (dev->product_code ==WAVE515_CODE ) +wave5_vdi_free_sram (dev); +video_unregister_device (dev->video_dev_dec);if (dev->v4l2_m2m_dec_dev)v4l2_m2m_release (dev->v4l2_m2m_dec_dev);
drivers/media/platform/chips-media/wave5/wave5-vpu-enc.c +1 -1
@@ -1247,7 +1247,7 @@ static int initialize_sequence(struct vpu_instance *inst) __func__, initial_info.min_frame_buffer_count, initial_info.min_src_frame_count); inst->min_src_buf_count = initial_info.min_src_frame_count + -COMMAND_QUEUE_DEPTH ; +WAVE521_COMMAND_QUEUE_DEPTH ; ctrl =v4l2_ctrl_find (&inst->v4l2_ctrl_hdl,V4L2_CID_MIN_BUFFERS_FOR_OUTPUT );
drivers/media/platform/chips-media/wave5/wave5-vpu.c +7 -1
@@ -63,7 +63,13 @@ static void wave5_vpu_handle_irq(void *dev_id)if (irq_reason &BIT (INT_WAVE5_INIT_SEQ ) || irq_reason &BIT (INT_WAVE5_ENC_SET_PARAM )) { -if (seq_done &BIT (inst->id)) { +if ((dev->product_code ==WAVE515_CODE ) && + (cmd_done &BIT (inst->id))) { + cmd_done &= ~BIT (inst->id); +wave5_vdi_write_register (dev,W5_RET_QUEUE_CMD_DONE_INST , + cmd_done); +complete (&inst->irq_done); + }else if (seq_done &BIT (inst->id)) { seq_done &= ~BIT (inst->id);wave5_vdi_write_register (dev,W5_RET_SEQ_DONE_INSTANCE_INFO , seq_done);
drivers/media/platform/chips-media/wave5/wave5-vpuapi.h +1 -0
@@ -18,6 +18,7 @@#include "wave5-vdi.h" enum product_id { +PRODUCT_ID_515 ,PRODUCT_ID_521 ,PRODUCT_ID_511 ,PRODUCT_ID_517 ,
drivers/media/platform/chips-media/wave5/wave5-vpuconfig.h +11 -5
@@ -8,6 +8,7 @@#ifndef _VPU_CONFIG_H_#define _VPU_CONFIG_H_ +#define WAVE515_CODE 0x5150#define WAVE517_CODE 0x5170#define WAVE537_CODE 0x5370#define WAVE511_CODE 0x5110
@@ -21,12 +22,13 @@ ((c) ==WAVE517_CODE || (c) ==WAVE537_CODE || \ (c) ==WAVE511_CODE || (c) ==WAVE521_CODE || \ (c) ==WAVE521E1_CODE || (c) ==WAVE521C_CODE || \ - (c) ==WAVE521C_DUAL_CODE ); \ + (c) ==WAVE521C_DUAL_CODE ) || (c) ==WAVE515_CODE ; \ })#define WAVE517_WORKBUF_SIZE (2 * 1024 * 1024)#define WAVE521ENC_WORKBUF_SIZE (128 * 1024) //HEVC 128K, AVC 40K#define WAVE521DEC_WORKBUF_SIZE (1784 * 1024) +#define WAVE515DEC_WORKBUF_SIZE (2 * 1024 * 1024)#define MAX_NUM_INSTANCE 32
@@ -49,17 +51,21 @@/************************************************************************/ #define VLC_BUF_NUM (2) -#define COMMAND_QUEUE_DEPTH (2) +#define WAVE521_COMMAND_QUEUE_DEPTH (2) +#define WAVE515_COMMAND_QUEUE_DEPTH (4)#define W5_REMAP_INDEX0 0#define W5_REMAP_INDEX1 1#define W5_REMAP_MAX_SIZE (1024 * 1024) -#define WAVE5_MAX_CODE_BUF_SIZE (2 * 1024 * 1024) -#define WAVE5_TEMPBUF_OFFSET WAVE5_MAX_CODE_BUF_SIZE +#define WAVE521_MAX_CODE_BUF_SIZE (2 * 1024 * 1024) +#define WAVE515_MAX_CODE_BUF_SIZE (1024 * 1024)#define WAVE5_TEMPBUF_SIZE (1024 * 1024) -#define SIZE_COMMON (WAVE5_MAX_CODE_BUF_SIZE + WAVE5_TEMPBUF_SIZE) +#define WAVE521_SIZE_COMMON (WAVE521_MAX_CODE_BUF_SIZE + WAVE5_TEMPBUF_SIZE) +#define WAVE515_ONE_TASKBUF_SIZE (8 * 1024 * 1024) +#define WAVE515_SIZE_COMMON (WAVE515_MAX_CODE_BUF_SIZE + WAVE5_TEMPBUF_SIZE + \ + WAVE515_COMMAND_QUEUE_DEPTH * WAVE515_ONE_TASKBUF_SIZE)//=====4. VPU REPORT MEMORY ======================//
drivers/media/platform/chips-media/wave5/wave5.h +6 -0
@@ -22,6 +22,12 @@*/ #define BSOPTION_ENABLE_EXPLICIT_END BIT(0)#define BSOPTION_HIGHLIGHT_STREAM_END BIT(1) +/* +* When RD_PTR_VALID_FLAG is 0 Wave515 ignores RD_PTR value and starts to +* decode from the access unit end position of the last decoded picture in +* bitstream buffer. +*/ +#define BSOPTION_RD_PTR_VALID_FLAG BIT(31)/* * Currently the driver only supports hardware with little endian but for source
Signature · 1 line
2.44.0
Hey Ivan,
Quoted 47 lines · Ivan Bornyakov
Initial support for Wave515 multi-decoder IP among other refinements. This was tested on FPGA prototype, so wave5_dt_ids[] was not expanded.
fluster score for JCT-VC-HEVC_V1 testsuite with
GStreamer-H.265-V4L2-Gst1.0 decoder is 132/147The issue with Main10 tests is that fluster expects decoded file to be in yuv420p10le format while this driver decodes HEVC Main10 into 8-bit yuv420p. Though result is looks alright to the naked eye, proper decoding into yuv420p10le is to be added.
The rest failed fluster tests are common with Wave521.
ChangeLog:
v1:
https://lore.kernel.org/linux-media/[email protected]/
v2:
https://lore.kernel.org/linux-media/[email protected]/
* drop patch "dt-bindings: media: cnm,wave521c: drop resets restriction" The only user of Wave5 in mainline is TI K3 boards, thus there is no real need to alter dt-bindings
* in patch "media: chips-media: wave5: support decoding HEVC Main10 profile" add check for flag "support_hevc10bit_dec"
* in patch "media: chips-media: wave5: support reset lines" movereset_control_deassert()out of else branch, addreset_control_assert()to probe error path.
* rework patch "media: chips-media: wave5: drop "sram-size" DT prop"
- don't move alloc/free form device open/close
- intead of exact configuration of reserved SRAM memory in DT and allocating all of it, allocate all available SRAM memory up toWAVE5_MAX_SRAM_SIZEfrom whatever pool provided.
* adjust patch "media: chips-media: wave5: support Wave515 decoder" according to changes in patches
"media: chips-media: wave5: support decoding HEVC Main10 profile" and "media: chips-media: wave5: drop "sram-size" DT prop"
v3:
https://lore.kernel.org/linux-media/[email protected]/
* reword patch "media: chips-media: wave5: separate irq setup routine" a bit.
* in patch "media: chips-media: wave5: drop "sram-size" DT prop"
- moveMAX_SRAM_SIZEdefine intomatch_data->sram_size
- add placeholders for validation that allocated SRAM memory is enough to encode/decode bitstream of given resolution before settingW5_USE_SEC_AXIandW5_CMD_ENC_PIC_USE_SEC_AXIregisters
- reword accordingly
* in patch "media: chips-media: wave5: support Wave515 decoder"
- add comments around SRAM memory allocation/freeing about
Quoted 8 lines
Wave515 specifics
- add comments aboutBSOPTION_RD_PTR_VALID_FLAGbit inW5_BS_OPTIONregister
- add W[AVE]521_ prefix to defines, for wich there are W[AVE]515_ alternatieves
- add semi-magic Wave515 specific formulas to estimate SRAM usage
v4:
* rebase onto next-20240415, no functional changes
Sorry for not finding the time for review, I'll work on it asap. But please don't send a full new series just for a rebase, as that just causes noise, I can very well rebase the series myself before a PR and if any hard conflicts appear they can be communicated.
Greetings,
Sebastian
Quoted 23 lines
Ivan Bornyakov (5):
media: chips-media: wave5: support decoding HEVC Main10 profile
media: chips-media: wave5: support reset lines
media: chips-media: wave5: separate irq setup routine
media: chips-media: wave5: drop "sram-size" DT prop
media: chips-media: wave5: support Wave515 decoder.../platform/chips-media/wave5/wave5-helper.c | 8 +- .../platform/chips-media/wave5/wave5-hw.c | 395 +++++++++++++----- .../chips-media/wave5/wave5-regdefine.h | 5 + .../platform/chips-media/wave5/wave5-vdi.c | 27 +- .../chips-media/wave5/wave5-vpu-dec.c | 51 ++- .../chips-media/wave5/wave5-vpu-enc.c | 2 +- .../platform/chips-media/wave5/wave5-vpu.c | 35 +- .../platform/chips-media/wave5/wave5-vpuapi.h | 3 + .../chips-media/wave5/wave5-vpuconfig.h | 16 +- .../media/platform/chips-media/wave5/wave5.h | 6 + 10 files changed, 407 insertions(+), 141 deletions(-)Signature · 1 line
2.44.0
Hi
Quoted 59 lines · Sebastian Fricke
Hey Ivan,
Quoted 47 lines · Ivan Bornyakov
Initial support for Wave515 multi-decoder IP among other refinements. This was tested on FPGA prototype, so wave5_dt_ids[] was not expanded.
fluster score for JCT-VC-HEVC_V1 testsuite with
GStreamer-H.265-V4L2-Gst1.0 decoder is 132/147The issue with Main10 tests is that fluster expects decoded file to be in yuv420p10le format while this driver decodes HEVC Main10 into 8-bit yuv420p. Though result is looks alright to the naked eye, proper decoding into yuv420p10le is to be added.
The rest failed fluster tests are common with Wave521.
ChangeLog:
v1:
https://lore.kernel.org/linux-media/[email protected]/
v2:
https://lore.kernel.org/linux-media/[email protected]/
* drop patch "dt-bindings: media: cnm,wave521c: drop resets restriction" The only user of Wave5 in mainline is TI K3 boards, thus there is no real need to alter dt-bindings
* in patch "media: chips-media: wave5: support decoding HEVC Main10 profile" add check for flag "support_hevc10bit_dec"
* in patch "media: chips-media: wave5: support reset lines" movereset_control_deassert()out of else branch, addreset_control_assert()to probe error path.
* rework patch "media: chips-media: wave5: drop "sram-size" DT prop"
- don't move alloc/free form device open/close
- intead of exact configuration of reserved SRAM memory in DT and allocating all of it, allocate all available SRAM memory up toWAVE5_MAX_SRAM_SIZEfrom whatever pool provided.
* adjust patch "media: chips-media: wave5: support Wave515 decoder" according to changes in patches
"media: chips-media: wave5: support decoding HEVC Main10 profile" and "media: chips-media: wave5: drop "sram-size" DT prop"
v3:
https://lore.kernel.org/linux-media/[email protected]/
* reword patch "media: chips-media: wave5: separate irq setup routine" a bit.
* in patch "media: chips-media: wave5: drop "sram-size" DT prop"
- moveMAX_SRAM_SIZEdefine intomatch_data->sram_size
- add placeholders for validation that allocated SRAM memory is enough to encode/decode bitstream of given resolution before settingW5_USE_SEC_AXIandW5_CMD_ENC_PIC_USE_SEC_AXIregisters
- reword accordingly
* in patch "media: chips-media: wave5: support Wave515 decoder"
- add comments around SRAM memory allocation/freeing aboutQuoted 8 lines
Wave515 specifics
- add comments aboutBSOPTION_RD_PTR_VALID_FLAGbit inW5_BS_OPTIONregister
- add W[AVE]521_ prefix to defines, for wich there are W[AVE]515_ alternatieves
- add semi-magic Wave515 specific formulas to estimate SRAM usage
v4:
* rebase onto next-20240415, no functional changes
Quoted 1 line
Sorry for not finding the time for review, I'll work on it asap.
Thanks in advance
Quoted 3 lines
But please don't send a full new series just for a rebase, as that just causes noise, I can very well rebase the series myself before a PR and if any hard conflicts appear they can be communicated.
Ok, noted. BTW, there was minor conflicts with commit "media: chips-media: wave5: Add hrtimer based polling support" wich was accepted since v3. Next time I'll ask explicitly if I should post rebased version or not. Apologies for the noise.
Quoted 27 lines
Greetings,
SebastianQuoted 23 lines
Ivan Bornyakov (5):
media: chips-media: wave5: support decoding HEVC Main10 profile
media: chips-media: wave5: support reset lines
media: chips-media: wave5: separate irq setup routine
media: chips-media: wave5: drop "sram-size" DT prop
media: chips-media: wave5: support Wave515 decoder.../platform/chips-media/wave5/wave5-helper.c | 8 +- .../platform/chips-media/wave5/wave5-hw.c | 395 +++++++++++++----- .../chips-media/wave5/wave5-regdefine.h | 5 + .../platform/chips-media/wave5/wave5-vdi.c | 27 +- .../chips-media/wave5/wave5-vpu-dec.c | 51 ++- .../chips-media/wave5/wave5-vpu-enc.c | 2 +- .../platform/chips-media/wave5/wave5-vpu.c | 35 +- .../platform/chips-media/wave5/wave5-vpuapi.h | 3 + .../chips-media/wave5/wave5-vpuconfig.h | 16 +- .../media/platform/chips-media/wave5/wave5.h | 6 + 10 files changed, 407 insertions(+), 141 deletions(-)Signature · 1 line
2.44.0
Quoted 63 lines · Ivan Bornyakov
Initial support for Wave515 multi-decoder IP among other refinements. This was tested on FPGA prototype, so wave5_dt_ids[] was not expanded.
fluster score for JCT-VC-HEVC_V1 testsuite with
GStreamer-H.265-V4L2-Gst1.0 decoder is 132/147The issue with Main10 tests is that fluster expects decoded file to be in yuv420p10le format while this driver decodes HEVC Main10 into 8-bit yuv420p. Though result is looks alright to the naked eye, proper decoding into yuv420p10le is to be added.
The rest failed fluster tests are common with Wave521.
ChangeLog:
v1:
https://lore.kernel.org/linux-media/[email protected]/
v2:
https://lore.kernel.org/linux-media/[email protected]/
* drop patch "dt-bindings: media: cnm,wave521c: drop resets restriction" The only user of Wave5 in mainline is TI K3 boards, thus there is no real need to alter dt-bindings
* in patch "media: chips-media: wave5: support decoding HEVC Main10 profile" add check for flag "support_hevc10bit_dec"
* in patch "media: chips-media: wave5: support reset lines" movereset_control_deassert()out of else branch, addreset_control_assert()to probe error path.
* rework patch "media: chips-media: wave5: drop "sram-size" DT prop"
- don't move alloc/free form device open/close
- intead of exact configuration of reserved SRAM memory in DT and allocating all of it, allocate all available SRAM memory up toWAVE5_MAX_SRAM_SIZEfrom whatever pool provided.
* adjust patch "media: chips-media: wave5: support Wave515 decoder" according to changes in patches
"media: chips-media: wave5: support decoding HEVC Main10 profile" and "media: chips-media: wave5: drop "sram-size" DT prop"
v3:
https://lore.kernel.org/linux-media/[email protected]/
* reword patch "media: chips-media: wave5: separate irq setup routine" a bit.
* in patch "media: chips-media: wave5: drop "sram-size" DT prop"
- moveMAX_SRAM_SIZEdefine intomatch_data->sram_size
- add placeholders for validation that allocated SRAM memory is enough to encode/decode bitstream of given resolution before settingW5_USE_SEC_AXIandW5_CMD_ENC_PIC_USE_SEC_AXIregisters
- reword accordingly
* in patch "media: chips-media: wave5: support Wave515 decoder"
- add comments around SRAM memory allocation/freeing about Wave515 specifics
- add comments aboutBSOPTION_RD_PTR_VALID_FLAGbit inW5_BS_OPTIONregister
- add W[AVE]521_ prefix to defines, for wich there are W[AVE]515_ alternatieves
- add semi-magic Wave515 specific formulas to estimate SRAM usage
v4:
* rebase onto next-20240415, no functional changesIvan Bornyakov (5):
media: chips-media: wave5: support decoding HEVC Main10 profile
media: chips-media: wave5: support reset lines
media: chips-media: wave5: separate irq setup routine
media: chips-media: wave5: drop "sram-size" DT prop
media: chips-media: wave5: support Wave515 decoder
Quoted 15 lines
.../platform/chips-media/wave5/wave5-helper.c | 8 +- .../platform/chips-media/wave5/wave5-hw.c | 395 +++++++++++++----- .../chips-media/wave5/wave5-regdefine.h | 5 + .../platform/chips-media/wave5/wave5-vdi.c | 27 +- .../chips-media/wave5/wave5-vpu-dec.c | 51 ++- .../chips-media/wave5/wave5-vpu-enc.c | 2 +- .../platform/chips-media/wave5/wave5-vpu.c | 35 +- .../platform/chips-media/wave5/wave5-vpuapi.h | 3 + .../chips-media/wave5/wave5-vpuconfig.h | 16 +- .../media/platform/chips-media/wave5/wave5.h | 6 + 10 files changed, 407 insertions(+), 141 deletions(-)Signature · 1 line
2.44.0
Friendly ping.
Hey Ivan,
Quoted 76 lines · Ivan Bornyakov
Quoted 75 lines · Ivan Bornyakov
Initial support for Wave515 multi-decoder IP among other refinements. This was tested on FPGA prototype, so wave5_dt_ids[] was not expanded.
fluster score for JCT-VC-HEVC_V1 testsuite with
GStreamer-H.265-V4L2-Gst1.0 decoder is 132/147The issue with Main10 tests is that fluster expects decoded file to be in yuv420p10le format while this driver decodes HEVC Main10 into 8-bit yuv420p. Though result is looks alright to the naked eye, proper decoding into yuv420p10le is to be added.
The rest failed fluster tests are common with Wave521.
ChangeLog:
v1:
https://lore.kernel.org/linux-media/[email protected]/
v2:
https://lore.kernel.org/linux-media/[email protected]/
* drop patch "dt-bindings: media: cnm,wave521c: drop resets restriction" The only user of Wave5 in mainline is TI K3 boards, thus there is no real need to alter dt-bindings
* in patch "media: chips-media: wave5: support decoding HEVC Main10 profile" add check for flag "support_hevc10bit_dec"
* in patch "media: chips-media: wave5: support reset lines" movereset_control_deassert()out of else branch, addreset_control_assert()to probe error path.
* rework patch "media: chips-media: wave5: drop "sram-size" DT prop"
- don't move alloc/free form device open/close
- intead of exact configuration of reserved SRAM memory in DT and allocating all of it, allocate all available SRAM memory up toWAVE5_MAX_SRAM_SIZEfrom whatever pool provided.
* adjust patch "media: chips-media: wave5: support Wave515 decoder" according to changes in patches
"media: chips-media: wave5: support decoding HEVC Main10 profile" and "media: chips-media: wave5: drop "sram-size" DT prop"
v3:
https://lore.kernel.org/linux-media/[email protected]/
* reword patch "media: chips-media: wave5: separate irq setup routine" a bit.
* in patch "media: chips-media: wave5: drop "sram-size" DT prop"
- moveMAX_SRAM_SIZEdefine intomatch_data->sram_size
- add placeholders for validation that allocated SRAM memory is enough to encode/decode bitstream of given resolution before settingW5_USE_SEC_AXIandW5_CMD_ENC_PIC_USE_SEC_AXIregisters
- reword accordingly
* in patch "media: chips-media: wave5: support Wave515 decoder"
- add comments around SRAM memory allocation/freeing about Wave515 specifics
- add comments aboutBSOPTION_RD_PTR_VALID_FLAGbit inW5_BS_OPTIONregister
- add W[AVE]521_ prefix to defines, for wich there are W[AVE]515_ alternatieves
- add semi-magic Wave515 specific formulas to estimate SRAM usage
v4:
* rebase onto next-20240415, no functional changesIvan Bornyakov (5):
media: chips-media: wave5: support decoding HEVC Main10 profile
media: chips-media: wave5: support reset lines
media: chips-media: wave5: separate irq setup routine
media: chips-media: wave5: drop "sram-size" DT prop
media: chips-media: wave5: support Wave515 decoder.../platform/chips-media/wave5/wave5-helper.c | 8 +- .../platform/chips-media/wave5/wave5-hw.c | 395 +++++++++++++----- .../chips-media/wave5/wave5-regdefine.h | 5 + .../platform/chips-media/wave5/wave5-vdi.c | 27 +- .../chips-media/wave5/wave5-vpu-dec.c | 51 ++- .../chips-media/wave5/wave5-vpu-enc.c | 2 +- .../platform/chips-media/wave5/wave5-vpu.c | 35 +- .../platform/chips-media/wave5/wave5-vpuapi.h | 3 + .../chips-media/wave5/wave5-vpuconfig.h | 16 +- .../media/platform/chips-media/wave5/wave5.h | 6 + 10 files changed, 407 insertions(+), 141 deletions(-)
Quoted 5 lines
Quoted 3 lines
--
2.44.0Friendly ping.
Sorry again for the delay, I was nearly finished with the patch set last week but the time wasn't sufficient. And I sadly have to delay it again a bit as I am on vacation until 13.05. I expect finishing it probably until 17.05.
Regards,
Sebastian
Greetings,
Quoted 6 lines · Sebastian Fricke
Hey Ivan,
Quoted 2 lines · Ivan Bornyakov
Friendly ping.
Quoted 7 lines
Sorry again for the delay, I was nearly finished with the patch set last week but the time wasn't sufficient. And I sadly have to delay it again a bit as I am on vacation until 13.05. I expect finishing it probably until 17.05.
Regards,
Sebastian
Do you still intend to review the patch series?
Also should I resend? Is there anything I can do to budge the process?
Hey Ivan,
Quoted 14 lines · Ivan Bornyakov
Greetings,
Quoted 11 lines · Sebastian Fricke
Hey Ivan,
Quoted 2 lines · Ivan Bornyakov
Friendly ping.
Sorry again for the delay, I was nearly finished with the patch set last week but the time wasn't sufficient. And I sadly have to delay it again a bit as I am on vacation until 13.05. I expect finishing it probably until 17.05.
Quoted 4 lines
Quoted 2 lines
Regards,
SebastianDo you still intend to review the patch series?
Yes, sadly maintainer work isn't the highest priority work at my job however.
Quoted 2 lines
Also should I resend? Is there anything I can do to budge the process?
Nope no action required from your side, just my busy schedule that keeps me from doing the work. If you want to you can help me get through my shelf quicker however by for example reviewing:
https://patchwork.linuxtv.org/project/linux-media/list/?series=12848
Regards,
Sebastian
Quoted 28 lines · Sebastian Fricke
Hey Ivan,
Quoted 14 lines · Ivan Bornyakov
Greetings,
Quoted 11 lines · Sebastian Fricke
Hey Ivan,
Quoted 2 lines · Ivan Bornyakov
Friendly ping.
Sorry again for the delay, I was nearly finished with the patch set last week but the time wasn't sufficient. And I sadly have to delay it again a bit as I am on vacation until 13.05. I expect finishing it probably until 17.05.
Quoted 4 lines
Quoted 2 lines
Regards,
SebastianDo you still intend to review the patch series?
Yes, sadly maintainer work isn't the highest priority work at my job however.
Quoted 2 lines
Also should I resend? Is there anything I can do to budge the process?
Quoted 7 lines
Nope no action required from your side, just my busy schedule that keeps me from doing the work. If you want to you can help me get through my shelf quicker however by for example reviewing:
https://patchwork.linuxtv.org/project/linux-media/list/?series=12848Regards,
Sebastian
Understood. I'll have a look.