Skip to contentSkip to conversation

pinctrl: qcom-ssbi: add support for PM8901

PATCH In review Herman van Hazendonk 5 participants 6 messages Apr 15, 2024 – Apr 17, 2024

Subsystems (6)
Device tree bindings Arm Qualcomm mailing list GPIO Pin control +2 more subsystems
lore
Share & tools
lore

Herman van Hazendonk

author
#0 lore raw

PATCH 1/2 pinctrl: qcom-ssbi: add support for PM8901

The PM8901 is used alongside the APQ8060/MSM8660 on the APQ8060 Dragonboard and HP TouchPad. It works the same as all others, so just add the compatible string for this variant.

Signed-off-by Herman van Hazendonk <[email protected]>
---
 Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml +1 -0
index fe717d8d4798..43146709e204 100644
@@ -35,6 +35,7 @@ properties:
               - qcom,pm8038-mpp
               - qcom,pm8058-mpp
               - qcom,pm8821-mpp
+              - qcom,pm8901-mpp
               - qcom,pm8917-mpp
               - qcom,pm8921-mpp
           - const: qcom,ssbi-mpp
#1 lore raw
Quoted 9 lines · Herman van Hazendonk

The PM8901 is used alongside the APQ8060/MSM8660 on the APQ8060 Dragonboard and HP TouchPad. It works the same as all others, so just add the compatible string for this variant.

Signed-off-by Herman van Hazendonk <[email protected]>
---
 Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml | 1 +
 1 file changed, 1 insertion(+)

Subject should be "dt-bindings: pinctrl: qcom,pmic-mpp: ..... "

Quoted 14 lines
Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml +1 -0
index fe717d8d4798..43146709e204 100644
@@ -35,6 +35,7 @@ properties:
               - qcom,pm8038-mpp
               - qcom,pm8058-mpp
               - qcom,pm8821-mpp
+              - qcom,pm8901-mpp
               - qcom,pm8917-mpp
               - qcom,pm8921-mpp
           - const: qcom,ssbi-mpp
Signature · 2 lines
With best wishes
Dmitry
author
#2 lore raw

PATCH v2 1/2 dt-bindings: pinctrl: qcom,pmic-mpp: add support for PM8901

In reply to Herman van Hazendonk

The PM8901 is used alongside the APQ8060/MSM8660 on the APQ8060 Dragonboard and HP TouchPad. It works the same as all others, so just add the compatible string for this variant.

Signed-off-by Herman van Hazendonk <[email protected]>
---
 Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml +1 -0
index fe717d8d4798..43146709e204 100644
@@ -35,6 +35,7 @@ properties:
               - qcom,pm8038-mpp
               - qcom,pm8058-mpp
               - qcom,pm8821-mpp
+              - qcom,pm8901-mpp
               - qcom,pm8917-mpp
               - qcom,pm8921-mpp
           - const: qcom,ssbi-mpp
maintainer
#3 lore raw

Re: [PATCH v2 1/2] dt-bindings: pinctrl: qcom,pmic-mpp: add support for PM8901

Quoted 3 lines · Herman van Hazendonk

The PM8901 is used alongside the APQ8060/MSM8660 on the APQ8060 Dragonboard and HP TouchPad. It works the same as all others, so just add the compatible string for this variant.

Please slow down the pace of your reposting giving people time to respond. People work in different timezones, get busy with their own stuff, travel to conferences, etc. As you see here, Linus fixed it up and there was no need to even post a new version.

Also, don't send new versions as replies to the prior version. Start a new thread.

Rob

#5 lore raw
In reply to Herman van Hazendonk
Quoted 6 lines · Herman van Hazendonk

The PM8901 is used alongside the APQ8060/MSM8660 on the APQ8060 Dragonboard and HP TouchPad. It works the same as all others, so just add the compatible string for this variant.

Signed-off-by Herman van Hazendonk <[email protected]>

---

Please use subject prefixes matching the subsystem. You can get them for example with git log --oneline -- DIRECTORY_OR_FILE on the directory your patch is touching.

Best regards,
Krzysztof