5.15.156-rc1 review

This is the start of the stable review cycle for the 5.15.156 release. There are 45 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 17 Apr 2024 14:19:30 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.156-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 5.15.156-rc1

Ville Syrjälä <[email protected]>
drm/i915/cdclk: Fix CDCLK programming order when pipes are active

Josh Poimboeuf <[email protected]>
x86/bugs: Replace CONFIG_SPECTRE_BHI_{ON,OFF} with CONFIG_MITIGATION_SPECTRE_BHI

Josh Poimboeuf <[email protected]>
x86/bugs: Remove CONFIG_BHI_MITIGATION_AUTO and spectre_bhi=auto

Josh Poimboeuf <[email protected]>
x86/bugs: Clarify that syscall hardening isn't a BHI mitigation

Josh Poimboeuf <[email protected]>
x86/bugs: Fix BHI handling of RRSBA

Ingo Molnar <[email protected]>
x86/bugs: Rename various 'ia32_cap' variables to 'x86_arch_cap_msr'

Josh Poimboeuf <[email protected]>
x86/bugs: Cache the value of MSR_IA32_ARCH_CAPABILITIES

Josh Poimboeuf <[email protected]>
x86/bugs: Fix BHI documentation

Daniel Sneddon <[email protected]>
x86/bugs: Fix return type of spectre_bhi_state()

Arnd Bergmann <[email protected]>
irqflags: Explicitly ignore lockdep_hrtimer_exit() argument

Adam Dunlap <[email protected]>
x86/apic: Force native_apic_mem_read() to use the MOV instruction

John Stultz <[email protected]>
selftests: timers: Fix abs() warning in posix_timers test

Sean Christopherson <[email protected]>
x86/cpu: Actually turn off mitigations by default for SPECULATION_MITIGATIONS=n

Namhyung Kim <[email protected]>
perf/x86: Fix out of range data

Gavin Shan <[email protected]>
vhost: Add smp_rmb() in vhost_vq_avail_empty()

Ville Syrjälä <[email protected]>

    drm/client: Fully protect modes[] with dev->mode_config.mutex

Boris Burkov <[email protected]>
btrfs: qgroup: correctly model root qgroup rsv in convert

Jacob Pan <[email protected]>
iommu/vt-d: Allocate local memory for page request queue

Arnd Bergmann <[email protected]>
tracing: hide unused ftrace_event_id_fops

David Arinzon <[email protected]>
net: ena: Fix incorrect descriptor free behavior

David Arinzon <[email protected]>
net: ena: Wrong missing IO completions check order

David Arinzon <[email protected]>
net: ena: Fix potential sign extension issue

Michal Luczaj <[email protected]>
af_unix: Fix garbage collector racing against connect()

Kuniyuki Iwashima <[email protected]>

    af_unix: Do not use atomic ops for unix_sk(sk)->inflight.

Arınç ÜNAL <[email protected]>
net: dsa: mt7530: trap link-local frames regardless of ST Port State

Daniel Machon <[email protected]>
net: sparx5: fix wrong config being used when reconfiguring PCS

Cosmin Ratiu <[email protected]>
net/mlx5: Properly link new fs rules into the tree

Eric Dumazet <[email protected]>
netfilter: complete validation of user input

Jiri Benc <[email protected]>
ipv6: fix race condition between ipv6_get_ifaddr and ipv6_del_addr

Arnd Bergmann <[email protected]>
ipv4/route: avoid unused-but-set-variable warning

Arnd Bergmann <[email protected]>
ipv6: fib: hide unused 'pn' variable

Geetha sowjanya <[email protected]>
octeontx2-af: Fix NIX SQ mode and BP config

Kuniyuki Iwashima <[email protected]>

    af_unix: Clear stale u->oob_skb.

Eric Dumazet <[email protected]>
geneve: fix header validation in geneve[6]_xmit_skb

Eric Dumazet <[email protected]>
xsk: validate user input for XDP_{UMEM|COMPLETION}_FILL_RING

Sebastian Andrzej Siewior <[email protected]>
u64_stats: Disable preemption on 32bit UP+SMP PREEMPT_RT during updates.

Ilya Maximets <[email protected]>
net: openvswitch: fix unwanted error log on timeout policy probing

Dan Carpenter <[email protected]>
scsi: qla2xxx: Fix off by one in qla_edif_app_getstats()

Arnd Bergmann <[email protected]>
nouveau: fix function cast warning

Alex Constantino <[email protected]>
Revert "drm/qxl: simplify qxl_fence_wait"

Frank Li <[email protected]>
arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order

Nini Song <[email protected]>
media: cec: core: remove length check of Timer Status

Dmitry Antipov <[email protected]>
Bluetooth: Fix memory leak in hci_req_sync_complete()

Steven Rostedt (Google) <[email protected]>
ring-buffer: Only update pages_touched when a new page is touched

Sven Eckelmann <[email protected]>
batman-adv: Avoid infinite loop trying to resize local TT

-------------

Diffstat:

 Documentation/admin-guide/hw-vuln/spectre.rst      |  22 +-
 Documentation/admin-guide/kernel-parameters.txt    |  12 +-
 Makefile                                           |   4 +-
 arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi    |  12 +-
 arch/x86/Kconfig                                   |  21 +-
 arch/x86/events/core.c                             |   1 +
 arch/x86/include/asm/apic.h                        |   3 +-
 arch/x86/kernel/cpu/bugs.c                         |  82 ++++----
 arch/x86/kernel/cpu/common.c                       |  48 ++---
 drivers/gpu/drm/drm_client_modeset.c               |   3 +-
 drivers/gpu/drm/i915/display/intel_cdclk.c         |   7 +-
 drivers/gpu/drm/i915/display/intel_cdclk.h         |   3 +
 .../gpu/drm/nouveau/nvkm/subdev/bios/shadowof.c    |   7 +-
 drivers/gpu/drm/qxl/qxl_release.c                  |  50 ++++-
 drivers/iommu/intel/svm.c                          |   2 +-
 drivers/media/cec/core/cec-adap.c                  |  14 --
 drivers/net/dsa/mt7530.c                           | 229 ++++++++++++++++++---
 drivers/net/dsa/mt7530.h                           |   5 +
 drivers/net/ethernet/amazon/ena/ena_com.c          |   2 +-
 drivers/net/ethernet/amazon/ena/ena_netdev.c       |  35 ++--
 .../net/ethernet/marvell/octeontx2/af/rvu_nix.c    |  22 +-
 drivers/net/ethernet/mellanox/mlx5/core/fs_core.c  |   3 +-
 .../net/ethernet/microchip/sparx5/sparx5_port.c    |   4 +-
 drivers/net/geneve.c                               |   4 +-
 drivers/scsi/qla2xxx/qla_edif.c                    |   2 +-
 drivers/vhost/vhost.c                              |  14 +-
 fs/btrfs/qgroup.c                                  |   2 +
 include/linux/dma-fence.h                          |   7 +
 include/linux/irqflags.h                           |   2 +-
 include/linux/u64_stats_sync.h                     |  42 ++--
 include/net/addrconf.h                             |   4 +
 include/net/af_unix.h                              |   2 +-
 include/net/ip_tunnels.h                           |  33 +++
 kernel/cpu.c                                       |   3 +-
 kernel/trace/ring_buffer.c                         |   6 +-
 kernel/trace/trace_events.c                        |   4 +
 net/batman-adv/translation-table.c                 |   2 +-
 net/bluetooth/hci_request.c                        |   4 +-
 net/ipv4/netfilter/arp_tables.c                    |   4 +
 net/ipv4/netfilter/ip_tables.c                     |   4 +
 net/ipv4/route.c                                   |   4 +-
 net/ipv6/addrconf.c                                |   7 +-
 net/ipv6/ip6_fib.c                                 |   7 +-
 net/ipv6/netfilter/ip6_tables.c                    |   4 +
 net/openvswitch/conntrack.c                        |   5 +-
 net/unix/af_unix.c                                 |   8 +-
 net/unix/garbage.c                                 |  35 +++-
 net/unix/scm.c                                     |   8 +-
 net/xdp/xsk.c                                      |   2 +
 tools/testing/selftests/timers/posix_timers.c      |   2 +-
 50 files changed, 556 insertions(+), 256 deletions(-)

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sven Eckelmann <[email protected]>

commit b1f532a3b1e6d2e5559c7ace49322922637a28aa upstream.

If the MTU of one of an attached interface becomes too small to transmit the local translation table then it must be resized to fit inside all fragments (when enabled) or a single packet.

But if the MTU becomes too low to transmit even the header + the VLAN specific part then the resizing of the local TT will never succeed. This can for example happen when the usable space is 110 bytes and 11 VLANs are on top of batman-adv. In this case, at least 116 byte would be needed. There will just be an endless spam of

batman_adv: batadv0: Forced to purge local tt entries to fit new maximum fragment MTU (110)

in the log but the function will never finish. Problem here is that the timeout will be halved all the time and will then stagnate at 0 and therefore never be able to reduce the table even more.

There are other scenarios possible with a similar result. The number of BATADV_TT_CLIENT_NOPURGE entries in the local TT can for example be too high to fit inside a packet. Such a scenario can therefore happen also with only a single VLAN + 7 non-purgable addresses - requiring at least 120 bytes.

While this should be handled proactively when:

* interface with too low MTU is added
* VLAN is added
* non-purgeable local mac is added
* MTU of an attached interface is reduced
* fragmentation setting gets disabled (which most likely requires dropping attached interfaces)

not all of these scenarios can be prevented because batman-adv is only consuming events without the the possibility to prevent these actions (non-purgable MAC address added, MTU of an attached interface is reduced). It is therefore necessary to also make sure that the code is able to handle also the situations when there were already incompatible system configuration are present.

---
 net/batman-adv/translation-table.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -3948,7 +3948,7 @@ void batadv_tt_local_resize_to_mtu(struc
 
 	spin_lock_bh(&bat_priv->tt.commit_lock);
 
-	while (true) {
+	while (timeout) {
 		table_size = batadv_tt_local_table_transmit_size(bat_priv);
 		if (packet_size_max >= table_size)
 			break;

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Steven Rostedt (Google) <[email protected]>

commit ffe3986fece696cf65e0ef99e74c75f848be8e30 upstream.

The "buffer_percent" logic that is used by the ring buffer splice code to only wake up the tasks when there's no data after the buffer is filled to the percentage of the "buffer_percent" file is dependent on three variables that determine the amount of data that is in the ring buffer:

1) pages_read - incremented whenever a new sub-buffer is consumed
2) pages_lost - incremented every time a writer overwrites a sub-buffer
3) pages_touched - incremented when a write goes to a new sub-buffer

The percentage is the calculation of:

(pages_touched - (pages_lost + pages_read)) / nr_pages

Basically, the amount of data is the total number of sub-bufs that have been touched, minus the number of sub-bufs lost and sub-bufs consumed. This is divided by the total count to give the buffer percentage. When the percentage is greater than the value in the "buffer_percent" file, it wakes up splice readers waiting for that amount.

It was observed that over time, the amount read from the splice was constantly decreasing the longer the trace was running. That is, if one asked for 60%, it would read over 60% when it first starts tracing, but then it would be woken up at under 60% and would slowly decrease the amount of data read after being woken up, where the amount becomes much less than the buffer percent.

This was due to an accounting of the pages_touched incrementation. This value is incremented whenever a writer transfers to a new sub-buffer. But the place where it was incremented was incorrect. If a writer overflowed the current sub-buffer it would go to the next one. If it gets preempted by an interrupt at that time, and the interrupt performs a trace, it too will end up going to the next sub-buffer. But only one should increment the counter. Unfortunately, that was not the case.

Change the cmpxchg() that does the real switch of the tail-page into a try_cmpxchg(), and on success, perform the increment of pages_touched. This will only increment the counter once for when the writer moves to a new sub-buffer, and not when there's a race and is incremented for when a writer and its preempting writer both move to the same new sub-buffer.

---
 kernel/trace/ring_buffer.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

@@ -1509,7 +1509,6 @@ static void rb_tail_page_update(struct r
 	old_write = local_add_return(RB_WRITE_INTCNT, &next_page->write);
 	old_entries = local_add_return(RB_WRITE_INTCNT, &next_page->entries);
 
-	local_inc(&cpu_buffer->pages_touched);
 	/*
 	 * Just make sure we have seen our old_write and synchronize
 	 * with any interrupts that come in.

@@ -1546,8 +1545,9 @@ static void rb_tail_page_update(struct r
 		 */
 		local_set(&next_page->page->commit, 0);
 
-		/* Again, either we update tail_page or an interrupt does */
-		(void)cmpxchg(&cpu_buffer->tail_page, tail_page, next_page);
+		/* Either we update tail_page or an interrupt does */
+		if (try_cmpxchg(&cpu_buffer->tail_page, &tail_page, next_page))
+			local_inc(&cpu_buffer->pages_touched);
 	}
 }
 

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dmitry Antipov <[email protected]>

commit 45d355a926ab40f3ae7bc0b0a00cb0e3e8a5a810 upstream.

In 'hci_req_sync_complete()', always free the previous sync request state before assigning reference to a new one.

---
 net/bluetooth/hci_request.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

@@ -108,8 +108,10 @@ static void hci_req_sync_complete(struct
 	if (hdev->req_status == HCI_REQ_PEND) {
 		hdev->req_result = result;
 		hdev->req_status = HCI_REQ_DONE;
-		if (skb)
+		if (skb) {
+			kfree_skb(hdev->req_skb);
 			hdev->req_skb = skb_get(skb);
+		}
 		wake_up_interruptible(&hdev->req_wait_q);
 	}
 }

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Nini Song <[email protected]>

commit ce5d241c3ad4568c12842168288993234345c0eb upstream.

The valid_la is used to check the length requirements, including special cases of Timer Status. If the length is shorter than 5, that means no Duration Available is returned, the message will be forced to be invalid.

However, the description of Duration Available in the spec is that this parameter may be returned when these cases, or that it can be optionally return when these cases. The key words in the spec description are flexible choices.

Remove the special length check of Timer Status to fit the spec which is not compulsory about that.

---
 drivers/media/cec/core/cec-adap.c |   14 --------------
 1 file changed, 14 deletions(-)

@@ -1117,20 +1117,6 @@ void cec_received_msg_ts(struct cec_adap
 	if (valid_la && min_len) {
 		/* These messages have special length requirements */
 		switch (cmd) {
-		case CEC_MSG_TIMER_STATUS:
-			if (msg->msg[2] & 0x10) {
-				switch (msg->msg[2] & 0xf) {
-				case CEC_OP_PROG_INFO_NOT_ENOUGH_SPACE:
-				case CEC_OP_PROG_INFO_MIGHT_NOT_BE_ENOUGH_SPACE:
-					if (msg->len < 5)
-						valid_la = false;
-					break;
-				}
-			} else if ((msg->msg[2] & 0xf) == CEC_OP_PROG_ERROR_DUPLICATE) {
-				if (msg->len < 5)
-					valid_la = false;
-			}
-			break;
 		case CEC_MSG_RECORD_ON:
 			switch (msg->msg[2]) {
 			case CEC_OP_RECORD_SRC_OWN:

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Frank Li <[email protected]>

[ Upstream commit c6ddd6e7b166532a0816825442ff60f70aed9647 ]

The actual clock show wrong frequency:

echo on >/sys/devices/platform/bus\@5b000000/5b010000.mmc/power/control cat /sys/kernel/debug/mmc0/ios

clock: 200000000 Hz
actual clock: 166000000 Hz

                   ^^^^^^^^^

.....

According to

sdhc0_lpcg: clock-controller@5b200000 {
                compatible = "fsl,imx8qxp-lpcg";
                reg = <0x5b200000 0x10000>;
                #clock-cells = <1>;
                clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>,
                         <&conn_ipg_clk>, <&conn_axi_clk>;
                clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>,
                                <IMX_LPCG_CLK_5>;
                clock-output-names = "sdhc0_lpcg_per_clk",
                                     "sdhc0_lpcg_ipg_clk",
                                     "sdhc0_lpcg_ahb_clk";
                power-domains = <&pd IMX_SC_R_SDHC_0>;
        }

"per_clk" should be IMX_LPCG_CLK_0 instead of IMX_LPCG_CLK_5.

After correct clocks order:

echo on >/sys/devices/platform/bus\@5b000000/5b010000.mmc/power/control cat /sys/kernel/debug/mmc0/ios

clock: 200000000 Hz
actual clock: 198000000 Hz

                   ^^^^^^^^

...

---
 arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

index 639220dbff008..685e9b83d42b1 100644
@@ -38,8 +38,8 @@ usdhc1: mmc@5b010000 {
 		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b010000 0x10000>;
 		clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc0_lpcg IMX_LPCG_CLK_0>,
-			 <&sdhc0_lpcg IMX_LPCG_CLK_5>;
+			 <&sdhc0_lpcg IMX_LPCG_CLK_5>,
+			 <&sdhc0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_0>;
 		status = "disabled";

@@ -49,8 +49,8 @@ usdhc2: mmc@5b020000 {
 		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b020000 0x10000>;
 		clocks = <&sdhc1_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc1_lpcg IMX_LPCG_CLK_0>,
-			 <&sdhc1_lpcg IMX_LPCG_CLK_5>;
+			 <&sdhc1_lpcg IMX_LPCG_CLK_5>,
+			 <&sdhc1_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_1>;
 		fsl,tuning-start-tap = <20>;

@@ -62,8 +62,8 @@ usdhc3: mmc@5b030000 {
 		interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b030000 0x10000>;
 		clocks = <&sdhc2_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc2_lpcg IMX_LPCG_CLK_0>,
-			 <&sdhc2_lpcg IMX_LPCG_CLK_5>;
+			 <&sdhc2_lpcg IMX_LPCG_CLK_5>,
+			 <&sdhc2_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_2>;
 		status = "disabled";

2.43.0

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alex Constantino <[email protected]>

[ Upstream commit 07ed11afb68d94eadd4ffc082b97c2331307c5ea ]

This reverts commit 5a838e5d5825c85556011478abde708251cc0776.

Changes from commit 5a838e5d5825 ("drm/qxl: simplify qxl_fence_wait") would result in a '[TTM] Buffer eviction failed' exception whenever it reached a timeout.
Due to a dependency to DMA_FENCE_WARN this also restores some code deleted by commit d72277b6c37d ("dma-buf: nuke DMA_FENCE_TRACE macros v2").

---
 drivers/gpu/drm/qxl/qxl_release.c | 50 +++++++++++++++++++++++++++----
 include/linux/dma-fence.h         |  7 +++++
 2 files changed, 52 insertions(+), 5 deletions(-)

index b19f2f00b2158..d4f26075383da 100644
@@ -58,16 +58,56 @@ static long qxl_fence_wait(struct dma_fence *fence, bool intr,
 			   signed long timeout)
 {
 	struct qxl_device *qdev;
+	struct qxl_release *release;
+	int count = 0, sc = 0;
+	bool have_drawable_releases;
 	unsigned long cur, end = jiffies + timeout;
 
 	qdev = container_of(fence->lock, struct qxl_device, release_lock);
+	release = container_of(fence, struct qxl_release, base);
+	have_drawable_releases = release->type == QXL_RELEASE_DRAWABLE;
 
-	if (!wait_event_timeout(qdev->release_event,
-				(dma_fence_is_signaled(fence) ||
-				 (qxl_io_notify_oom(qdev), 0)),
-				timeout))
-		return 0;
+retry:
+	sc++;
+
+	if (dma_fence_is_signaled(fence))
+		goto signaled;
+
+	qxl_io_notify_oom(qdev);
+
+	for (count = 0; count < 11; count++) {
+		if (!qxl_queue_garbage_collect(qdev, true))
+			break;
+
+		if (dma_fence_is_signaled(fence))
+			goto signaled;
+	}
+
+	if (dma_fence_is_signaled(fence))
+		goto signaled;
+
+	if (have_drawable_releases || sc < 4) {
+		if (sc > 2)
+			/* back off */
+			usleep_range(500, 1000);
+
+		if (time_after(jiffies, end))
+			return 0;
+
+		if (have_drawable_releases && sc > 300) {
+			DMA_FENCE_WARN(fence,
+				       "failed to wait on release %llu after spincount %d\n",
+				       fence->context & ~0xf0000000, sc);
+			goto signaled;
+		}
+		goto retry;
+	}
+	/*
+	 * yeah, original sync_obj_wait gave up after 3 spins when
+	 * have_drawable_releases is not set.
+	 */
 
+signaled:
 	cur = jiffies;
 	if (time_after(cur, end))
 		return 0;

index 9d276655cc25a..6659d0369ec5c 100644
@@ -631,4 +631,11 @@ u64 dma_fence_context_alloc(unsigned num);
 			##args);					\
 	} while (0)
 
+#define DMA_FENCE_WARN(f, fmt, args...) \
+	do {								\
+		struct dma_fence *__ff = (f);				\
+		pr_warn("f %llu#%llu: " fmt, __ff->context, __ff->seqno,\
+			 ##args);					\
+	} while (0)
+
 #endif /* __LINUX_DMA_FENCE_H */

2.43.0

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <[email protected]>

[ Upstream commit 185fdb4697cc9684a02f2fab0530ecdd0c2f15d4 ]

Calling a function through an incompatible pointer type causes breaks kcfi, so clang warns about the assignment:

drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadowof.c:73:10: error: cast from 'void (*)(const void *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
73 | .fini = (void(*)(void *))kfree,

Avoid this with a trivial wrapper.

---
 drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadowof.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

index 4bf486b571013..cb05f7f48a98b 100644
@@ -66,11 +66,16 @@ of_init(struct nvkm_bios *bios, const char *name)
 	return ERR_PTR(-EINVAL);
 }
 
+static void of_fini(void *p)
+{
+	kfree(p);
+}
+
 const struct nvbios_source
 nvbios_of = {
 	.name = "OpenFirmware",
 	.init = of_init,
-	.fini = (void(*)(void *))kfree,
+	.fini = of_fini,
 	.read = of_read,
 	.size = of_size,
 	.rw = false,

2.43.0

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <[email protected]>

[ Upstream commit 4406e4176f47177f5e51b4cc7e6a7a2ff3dbfbbd ]

The app_reply->elem[] array is allocated earlier in this function and it has app_req.num_ports elements. Thus this > comparison needs to be >= to prevent memory corruption.

---
 drivers/scsi/qla2xxx/qla_edif.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 40a03f9c2d21f..ac702f74dd984 100644
@@ -1012,7 +1012,7 @@ qla_edif_app_getstats(scsi_qla_host_t *vha, struct bsg_job *bsg_job)
 
 		list_for_each_entry_safe(fcport, tf, &vha->vp_fcports, list) {
 			if (fcport->edif.enable) {
-				if (pcnt > app_req.num_ports)
+				if (pcnt >= app_req.num_ports)
 					break;
 
 				app_reply->elem[pcnt].rekey_count =

2.43.0

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ilya Maximets <[email protected]>

[ Upstream commit 4539f91f2a801c0c028c252bffae56030cfb2cae ]

On startup, ovs-vswitchd probes different datapath features including support for timeout policies. While probing, it tries to execute certain operations with OVS_PACKET_ATTR_PROBE or OVS_FLOW_ATTR_PROBE attributes set. These attributes tell the openvswitch module to not log any errors when they occur as it is expected that some of the probes will fail.

For some reason, setting the timeout policy ignores the PROBE attribute and logs a failure anyway. This is causing the following kernel log on each re-start of ovs-vswitchd:

kernel: Failed to associated timeout policy `ovs_test_tp'

Fix that by using the same logging macro that all other messages are using. The message will still be printed at info level when needed and will be rate limited, but with a net rate limiter instead of generic printk one.

The nf_ct_set_timeout() itself will still print some info messages, but at least this change makes logging in openvswitch module more consistent.

---
 net/openvswitch/conntrack.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

index 7106ce231a2dd..60dd6f32d520e 100644
@@ -1704,8 +1704,9 @@ int ovs_ct_copy_action(struct net *net, const struct nlattr *attr,
 	if (ct_info.timeout[0]) {
 		if (nf_ct_set_timeout(net, ct_info.ct, family, key->ip.proto,
 				      ct_info.timeout))
-			pr_info_ratelimited("Failed to associated timeout "
-					    "policy `%s'\n", ct_info.timeout);
+			OVS_NLERR(log,
+				  "Failed to associated timeout policy '%s'",
+				  ct_info.timeout);
 		else
 			ct_info.nf_ct_timeout = rcu_dereference(
 				nf_ct_timeout_find(ct_info.ct)->timeout);

2.43.0

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sebastian Andrzej Siewior <[email protected]>

[ Upstream commit 3c118547f87e930d45a5787e386734015dd93b32 ]

On PREEMPT_RT the seqcount_t for synchronisation is required on 32bit architectures even on UP because the softirq (and the threaded IRQ handler) can be preempted.

With the seqcount_t for synchronisation, a reader with higher priority can preempt the writer and then spin endlessly in read_seqcount_begin() while the writer can't make progress.

To avoid such a lock up on PREEMPT_RT the writer must disable preemption during the update. There is no need to disable interrupts because no writer is using this API in hard-IRQ context on PREEMPT_RT.

Disable preemption on 32bit-RT within the u64_stats write section.

Stable-dep-of: 38a15d0a50e0 ("u64_stats: fix u64_stats_init() for lockdep when used repeatedly in one file")

---
 include/linux/u64_stats_sync.h | 42 ++++++++++++++++++++++------------
 1 file changed, 28 insertions(+), 14 deletions(-)

index e81856c0ba134..6a0f2097d3709 100644
@@ -66,7 +66,7 @@
 #include <linux/seqlock.h>
 
 struct u64_stats_sync {
-#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
+#if BITS_PER_LONG == 32 && (defined(CONFIG_SMP) || defined(CONFIG_PREEMPT_RT))
 	seqcount_t	seq;
 #endif
 };

@@ -115,7 +115,7 @@ static inline void u64_stats_inc(u64_stats_t *p)
 }
 #endif
 
-#if BITS_PER_LONG == 32 && defined(CONFIG_SMP)
+#if BITS_PER_LONG == 32 && (defined(CONFIG_SMP) || defined(CONFIG_PREEMPT_RT))
 #define u64_stats_init(syncp)	seqcount_init(&(syncp)->seq)
 #else
 static inline void u64_stats_init(struct u64_stats_sync *syncp)

@@ -125,15 +125,19 @@ static inline void u64_stats_init(struct u64_stats_sync *syncp)
 
 static inline void u64_stats_update_begin(struct u64_stats_sync *syncp)
 {
-#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
+#if BITS_PER_LONG == 32 && (defined(CONFIG_SMP) || defined(CONFIG_PREEMPT_RT))
+	if (IS_ENABLED(CONFIG_PREEMPT_RT))
+		preempt_disable();
 	write_seqcount_begin(&syncp->seq);
 #endif
 }
 
 static inline void u64_stats_update_end(struct u64_stats_sync *syncp)
 {
-#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
+#if BITS_PER_LONG == 32 && (defined(CONFIG_SMP) || defined(CONFIG_PREEMPT_RT))
 	write_seqcount_end(&syncp->seq);
+	if (IS_ENABLED(CONFIG_PREEMPT_RT))
+		preempt_enable();
 #endif
 }
 

@@ -142,8 +146,11 @@ u64_stats_update_begin_irqsave(struct u64_stats_sync *syncp)
 {
 	unsigned long flags = 0;
 
-#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
-	local_irq_save(flags);
+#if BITS_PER_LONG == 32 && (defined(CONFIG_SMP) || defined(CONFIG_PREEMPT_RT))
+	if (IS_ENABLED(CONFIG_PREEMPT_RT))
+		preempt_disable();
+	else
+		local_irq_save(flags);
 	write_seqcount_begin(&syncp->seq);
 #endif
 	return flags;

@@ -153,15 +160,18 @@ static inline void
 u64_stats_update_end_irqrestore(struct u64_stats_sync *syncp,
 				unsigned long flags)
 {
-#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
+#if BITS_PER_LONG == 32 && (defined(CONFIG_SMP) || defined(CONFIG_PREEMPT_RT))
 	write_seqcount_end(&syncp->seq);
-	local_irq_restore(flags);
+	if (IS_ENABLED(CONFIG_PREEMPT_RT))
+		preempt_enable();
+	else
+		local_irq_restore(flags);
 #endif
 }
 
 static inline unsigned int __u64_stats_fetch_begin(const struct u64_stats_sync *syncp)
 {
-#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
+#if BITS_PER_LONG == 32 && (defined(CONFIG_SMP) || defined(CONFIG_PREEMPT_RT))
 	return read_seqcount_begin(&syncp->seq);
 #else
 	return 0;

@@ -170,7 +180,7 @@ static inline unsigned int __u64_stats_fetch_begin(const struct u64_stats_sync *
 
 static inline unsigned int u64_stats_fetch_begin(const struct u64_stats_sync *syncp)
 {
-#if BITS_PER_LONG==32 && !defined(CONFIG_SMP)
+#if BITS_PER_LONG == 32 && (!defined(CONFIG_SMP) && !defined(CONFIG_PREEMPT_RT))
 	preempt_disable();
 #endif
 	return __u64_stats_fetch_begin(syncp);

@@ -179,7 +189,7 @@ static inline unsigned int u64_stats_fetch_begin(const struct u64_stats_sync *sy
 static inline bool __u64_stats_fetch_retry(const struct u64_stats_sync *syncp,
 					 unsigned int start)
 {
-#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
+#if BITS_PER_LONG == 32 && (defined(CONFIG_SMP) || defined(CONFIG_PREEMPT_RT))
 	return read_seqcount_retry(&syncp->seq, start);
 #else
 	return false;

@@ -189,7 +199,7 @@ static inline bool __u64_stats_fetch_retry(const struct u64_stats_sync *syncp,
 static inline bool u64_stats_fetch_retry(const struct u64_stats_sync *syncp,
 					 unsigned int start)
 {
-#if BITS_PER_LONG==32 && !defined(CONFIG_SMP)
+#if BITS_PER_LONG == 32 && (!defined(CONFIG_SMP) && !defined(CONFIG_PREEMPT_RT))
 	preempt_enable();
 #endif
 	return __u64_stats_fetch_retry(syncp, start);

@@ -203,7 +213,9 @@ static inline bool u64_stats_fetch_retry(const struct u64_stats_sync *syncp,
  */
 static inline unsigned int u64_stats_fetch_begin_irq(const struct u64_stats_sync *syncp)
 {
-#if BITS_PER_LONG==32 && !defined(CONFIG_SMP)
+#if BITS_PER_LONG == 32 && defined(CONFIG_PREEMPT_RT)
+	preempt_disable();
+#elif BITS_PER_LONG == 32 && !defined(CONFIG_SMP)
 	local_irq_disable();
 #endif
 	return __u64_stats_fetch_begin(syncp);

@@ -212,7 +224,9 @@ static inline unsigned int u64_stats_fetch_begin_irq(const struct u64_stats_sync
 static inline bool u64_stats_fetch_retry_irq(const struct u64_stats_sync *syncp,
 					     unsigned int start)
 {
-#if BITS_PER_LONG==32 && !defined(CONFIG_SMP)
+#if BITS_PER_LONG == 32 && defined(CONFIG_PREEMPT_RT)
+	preempt_enable();
+#elif BITS_PER_LONG == 32 && !defined(CONFIG_SMP)
 	local_irq_enable();
 #endif
 	return __u64_stats_fetch_retry(syncp, start);

2.43.0

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit 237f3cf13b20db183d3706d997eedc3c49eacd44 ]

syzbot reported an illegal copy in xsk_setsockopt() [1]

Make sure to validate setsockopt() @optlen parameter.

[1]

 BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset include/linux/sockptr.h:49 [inline]
 BUG: KASAN: slab-out-of-bounds in copy_from_sockptr include/linux/sockptr.h:55 [inline]
 BUG: KASAN: slab-out-of-bounds in xsk_setsockopt+0x909/0xa40 net/xdp/xsk.c:1420
Read of size 4 at addr ffff888028c6cde3 by task syz-executor.0/7549

CPU: 0 PID: 7549 Comm: syz-executor.0 Not tainted 6.8.0-syzkaller-08951-gfe46a7dd189e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
Call Trace:
 <TASK>
  __dump_stack lib/dump_stack.c:88 [inline]
  dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
  print_address_description mm/kasan/report.c:377 [inline]
  print_report+0x169/0x550 mm/kasan/report.c:488
  kasan_report+0x143/0x180 mm/kasan/report.c:601
  copy_from_sockptr_offset include/linux/sockptr.h:49 [inline]
  copy_from_sockptr include/linux/sockptr.h:55 [inline]
  xsk_setsockopt+0x909/0xa40 net/xdp/xsk.c:1420
  do_sock_setsockopt+0x3af/0x720 net/socket.c:2311
  __sys_setsockopt+0x1ae/0x250 net/socket.c:2334
  __do_sys_setsockopt net/socket.c:2343 [inline]
  __se_sys_setsockopt net/socket.c:2340 [inline]
  __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340
 do_syscall_64+0xfb/0x240
 entry_SYSCALL_64_after_hwframe+0x6d/0x75
RIP: 0033:0x7fb40587de69
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fb40665a0c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036
RAX: ffffffffffffffda RBX: 00007fb4059abf80 RCX: 00007fb40587de69
RDX: 0000000000000005 RSI: 000000000000011b RDI: 0000000000000006
RBP: 00007fb4058ca47a R08: 0000000000000002 R09: 0000000000000000
R10: 0000000020001980 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000000b R14: 00007fb4059abf80 R15: 00007fff57ee4d08
 </TASK>

Allocated by task 7549:
  kasan_save_stack mm/kasan/common.c:47 [inline]
  kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
  poison_kmalloc_redzone mm/kasan/common.c:370 [inline]
  __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:387
  kasan_kmalloc include/linux/kasan.h:211 [inline]
  __do_kmalloc_node mm/slub.c:3966 [inline]
  __kmalloc+0x233/0x4a0 mm/slub.c:3979
  kmalloc include/linux/slab.h:632 [inline]
  __cgroup_bpf_run_filter_setsockopt+0xd2f/0x1040 kernel/bpf/cgroup.c:1869
  do_sock_setsockopt+0x6b4/0x720 net/socket.c:2293
  __sys_setsockopt+0x1ae/0x250 net/socket.c:2334
  __do_sys_setsockopt net/socket.c:2343 [inline]
  __se_sys_setsockopt net/socket.c:2340 [inline]
  __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340
 do_syscall_64+0xfb/0x240
 entry_SYSCALL_64_after_hwframe+0x6d/0x75

The buggy address belongs to the object at ffff888028c6cde0
 which belongs to the cache kmalloc-8 of size 8

The buggy address is located 1 bytes to the right of
allocated 2-byte region [ffff888028c6cde0, ffff888028c6cde2)

The buggy address belongs to the physical page:
page:ffffea0000a31b00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888028c6c9c0 pfn:0x28c6c
anon flags: 0xfff00000000800(slab|node=0|zone=1|lastcpupid=0x7ff)
page_type: 0xffffffff()
raw: 00fff00000000800 ffff888014c41280 0000000000000000 dead000000000001
raw: ffff888028c6c9c0 0000000080800057 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 0, migratetype Unmovable, gfp_mask 0x112cc0(GFP_USER|__GFP_NOWARN|__GFP_NORETRY), pid 6648, tgid 6644 (syz-executor.0), ts 133906047828, free_ts 133859922223
  set_page_owner include/linux/page_owner.h:31 [inline]
  post_alloc_hook+0x1ea/0x210 mm/page_alloc.c:1533
  prep_new_page mm/page_alloc.c:1540 [inline]
  get_page_from_freelist+0x33ea/0x3580 mm/page_alloc.c:3311
  __alloc_pages+0x256/0x680 mm/page_alloc.c:4569
  __alloc_pages_node include/linux/gfp.h:238 [inline]
  alloc_pages_node include/linux/gfp.h:261 [inline]
  alloc_slab_page+0x5f/0x160 mm/slub.c:2175
  allocate_slab mm/slub.c:2338 [inline]
  new_slab+0x84/0x2f0 mm/slub.c:2391
  ___slab_alloc+0xc73/0x1260 mm/slub.c:3525
  __slab_alloc mm/slub.c:3610 [inline]
  __slab_alloc_node mm/slub.c:3663 [inline]
  slab_alloc_node mm/slub.c:3835 [inline]
  __do_kmalloc_node mm/slub.c:3965 [inline]
  __kmalloc_node+0x2db/0x4e0 mm/slub.c:3973
  kmalloc_node include/linux/slab.h:648 [inline]
  __vmalloc_area_node mm/vmalloc.c:3197 [inline]
  __vmalloc_node_range+0x5f9/0x14a0 mm/vmalloc.c:3392
  __vmalloc_node mm/vmalloc.c:3457 [inline]
  vzalloc+0x79/0x90 mm/vmalloc.c:3530
  bpf_check+0x260/0x19010 kernel/bpf/verifier.c:21162
  bpf_prog_load+0x1667/0x20f0 kernel/bpf/syscall.c:2895
  __sys_bpf+0x4ee/0x810 kernel/bpf/syscall.c:5631
  __do_sys_bpf kernel/bpf/syscall.c:5738 [inline]
  __se_sys_bpf kernel/bpf/syscall.c:5736 [inline]
  __x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5736
 do_syscall_64+0xfb/0x240
 entry_SYSCALL_64_after_hwframe+0x6d/0x75
page last free pid 6650 tgid 6647 stack trace:
  reset_page_owner include/linux/page_owner.h:24 [inline]
  free_pages_prepare mm/page_alloc.c:1140 [inline]
  free_unref_page_prepare+0x95d/0xa80 mm/page_alloc.c:2346
  free_unref_page_list+0x5a3/0x850 mm/page_alloc.c:2532
  release_pages+0x2117/0x2400 mm/swap.c:1042
  tlb_batch_pages_flush mm/mmu_gather.c:98 [inline]
  tlb_flush_mmu_free mm/mmu_gather.c:293 [inline]
  tlb_flush_mmu+0x34d/0x4e0 mm/mmu_gather.c:300
  tlb_finish_mmu+0xd4/0x200 mm/mmu_gather.c:392
  exit_mmap+0x4b6/0xd40 mm/mmap.c:3300
  __mmput+0x115/0x3c0 kernel/fork.c:1345
  exit_mm+0x220/0x310 kernel/exit.c:569
  do_exit+0x99e/0x27e0 kernel/exit.c:865
  do_group_exit+0x207/0x2c0 kernel/exit.c:1027
  get_signal+0x176e/0x1850 kernel/signal.c:2907
  arch_do_signal_or_restart+0x96/0x860 arch/x86/kernel/signal.c:310
  exit_to_user_mode_loop kernel/entry/common.c:105 [inline]
  exit_to_user_mode_prepare include/linux/entry-common.h:328 [inline]
  __syscall_exit_to_user_mode_work kernel/entry/common.c:201 [inline]
  syscall_exit_to_user_mode+0xc9/0x360 kernel/entry/common.c:212
  do_syscall_64+0x10a/0x240 arch/x86/entry/common.c:89
 entry_SYSCALL_64_after_hwframe+0x6d/0x75

Memory state around the buggy address:
 ffff888028c6cc80: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc
 ffff888028c6cd00: fa fc fc fc fa fc fc fc 00 fc fc fc 06 fc fc fc
>ffff888028c6cd80: fa fc fc fc fa fc fc fc fa fc fc fc 02 fc fc fc
                                                       ^
 ffff888028c6ce00: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc
 ffff888028c6ce80: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc

---
 net/xdp/xsk.c | 2 ++
 1 file changed, 2 insertions(+)

index e5eb5616be0ca..1f61d15b3d1d4 100644
@@ -1135,6 +1135,8 @@ static int xsk_setsockopt(struct socket *sock, int level, int optname,
 		struct xsk_queue **q;
 		int entries;
 
+		if (optlen < sizeof(entries))
+			return -EINVAL;
 		if (copy_from_sockptr(&entries, optval, sizeof(entries)))
 			return -EFAULT;
 

2.43.0

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit d8a6213d70accb403b82924a1c229e733433a5ef ]

syzbot is able to trigger an uninit-value in geneve_xmit() [1]

Problem : While most ip tunnel helpers (like ip_tunnel_get_dsfield()) uses skb_protocol(skb, true), pskb_inet_may_pull() is only using skb->protocol.

If anything else than ETH_P_IPV6 or ETH_P_IP is found in skb->protocol, pskb_inet_may_pull() does nothing at all.

If a vlan tag was provided by the caller (af_packet in the syzbot case), the network header might not point to the correct location, and skb linear part could be smaller than expected.

Add skb_vlan_inet_prepare() to perform a complete mac validation.

Use this in geneve for the moment, I suspect we need to adopt this more broadly.

v4 - Jakub reported v3 broke l2_tos_ttl_inherit.sh selftest
- Only call __vlan_get_protocol() for vlan types.

v2,v3 - Addressed Sabrina comments on v1 and v2

[1]

BUG: KMSAN: uninit-value in geneve_xmit_skb drivers/net/geneve.c:910 [inline]
 BUG: KMSAN: uninit-value in geneve_xmit+0x302d/0x5420 drivers/net/geneve.c:1030
  geneve_xmit_skb drivers/net/geneve.c:910 [inline]
  geneve_xmit+0x302d/0x5420 drivers/net/geneve.c:1030
  __netdev_start_xmit include/linux/netdevice.h:4903 [inline]
  netdev_start_xmit include/linux/netdevice.h:4917 [inline]
  xmit_one net/core/dev.c:3531 [inline]
  dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3547
  __dev_queue_xmit+0x348d/0x52c0 net/core/dev.c:4335
  dev_queue_xmit include/linux/netdevice.h:3091 [inline]
  packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276
  packet_snd net/packet/af_packet.c:3081 [inline]
  packet_sendmsg+0x8bb0/0x9ef0 net/packet/af_packet.c:3113
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg+0x30f/0x380 net/socket.c:745
  __sys_sendto+0x685/0x830 net/socket.c:2191
  __do_sys_sendto net/socket.c:2203 [inline]
  __se_sys_sendto net/socket.c:2199 [inline]
  __x64_sys_sendto+0x125/0x1d0 net/socket.c:2199
 do_syscall_64+0xd5/0x1f0
 entry_SYSCALL_64_after_hwframe+0x6d/0x75

Uninit was created at:

  slab_post_alloc_hook mm/slub.c:3804 [inline]
  slab_alloc_node mm/slub.c:3845 [inline]
  kmem_cache_alloc_node+0x613/0xc50 mm/slub.c:3888
  kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:577
  __alloc_skb+0x35b/0x7a0 net/core/skbuff.c:668
  alloc_skb include/linux/skbuff.h:1318 [inline]
  alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6504
  sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2795
  packet_alloc_skb net/packet/af_packet.c:2930 [inline]
  packet_snd net/packet/af_packet.c:3024 [inline]
  packet_sendmsg+0x722d/0x9ef0 net/packet/af_packet.c:3113
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg+0x30f/0x380 net/socket.c:745
  __sys_sendto+0x685/0x830 net/socket.c:2191
  __do_sys_sendto net/socket.c:2203 [inline]
  __se_sys_sendto net/socket.c:2199 [inline]
  __x64_sys_sendto+0x125/0x1d0 net/socket.c:2199
 do_syscall_64+0xd5/0x1f0
 entry_SYSCALL_64_after_hwframe+0x6d/0x75

CPU: 0 PID: 5033 Comm: syz-executor346 Not tainted 6.9.0-rc1-syzkaller-00005-g928a87efa423 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024

---
 drivers/net/geneve.c     |  4 ++--
 include/net/ip_tunnels.h | 33 +++++++++++++++++++++++++++++++++
 2 files changed, 35 insertions(+), 2 deletions(-)

index 9569b5cc595ec..0e4ea3c0fe829 100644
@@ -909,7 +909,7 @@ static int geneve_xmit_skb(struct sk_buff *skb, struct net_device *dev,
 	__be16 sport;
 	int err;
 
-	if (!pskb_inet_may_pull(skb))
+	if (!skb_vlan_inet_prepare(skb))
 		return -EINVAL;
 
 	sport = udp_flow_src_port(geneve->net, skb, 1, USHRT_MAX, true);

@@ -1006,7 +1006,7 @@ static int geneve6_xmit_skb(struct sk_buff *skb, struct net_device *dev,
 	__be16 sport;
 	int err;
 
-	if (!pskb_inet_may_pull(skb))
+	if (!skb_vlan_inet_prepare(skb))
 		return -EINVAL;
 
 	sport = udp_flow_src_port(geneve->net, skb, 1, USHRT_MAX, true);

index 17ec652e8f124..eca36edb85570 100644
@@ -332,6 +332,39 @@ static inline bool pskb_inet_may_pull(struct sk_buff *skb)
 	return pskb_network_may_pull(skb, nhlen);
 }
 
+/* Variant of pskb_inet_may_pull().
+ */
+static inline bool skb_vlan_inet_prepare(struct sk_buff *skb)
+{
+	int nhlen = 0, maclen = ETH_HLEN;
+	__be16 type = skb->protocol;
+
+	/* Essentially this is skb_protocol(skb, true)
+	 * And we get MAC len.
+	 */
+	if (eth_type_vlan(type))
+		type = __vlan_get_protocol(skb, type, &maclen);
+
+	switch (type) {
+#if IS_ENABLED(CONFIG_IPV6)
+	case htons(ETH_P_IPV6):
+		nhlen = sizeof(struct ipv6hdr);
+		break;
+#endif
+	case htons(ETH_P_IP):
+		nhlen = sizeof(struct iphdr);
+		break;
+	}
+	/* For ETH_P_IPV6/ETH_P_IP we make sure to pull
+	 * a base network header in skb->head.
+	 */
+	if (!pskb_may_pull(skb, maclen + nhlen))
+		return false;
+
+	skb_set_network_header(skb, maclen);
+	return true;
+}
+
 static inline int ip_encap_hlen(struct ip_tunnel_encap *e)
 {
 	const struct ip_tunnel_encap_ops *ops;

2.43.0

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Kuniyuki Iwashima <[email protected]>

[ Upstream commit b46f4eaa4f0ec38909fb0072eea3aeddb32f954e ]

syzkaller started to report deadlock of unix_gc_lock after commit 4090fa373f0e ("af_unix: Replace garbage collection algorithm."), but it just uncovers the bug that has been there since commit 314001f0bf92 ("af_unix: Add OOB support").

The repro basically does the following.

from socket import *
from array import array

c1, c2 = socketpair(AF_UNIX, SOCK_STREAM)
c1.sendmsg([b'a'], [(SOL_SOCKET, SCM_RIGHTS, array("i", [c2.fileno()]))], MSG_OOB) c2.recv(1) # blocked as no normal data in recv queue

c2.close() # done async and unblock recv()
c1.close() # done async and trigger GC

A socket sends its file descriptor to itself as OOB data and tries to receive normal data, but finally recv() fails due to async close().

The problem here is wrong handling of OOB skb in manage_oob(). When recvmsg() is called without MSG_OOB, manage_oob() is called to check if the peeked skb is OOB skb. In such a case, manage_oob() pops it out of the receive queue but does not clear unix_sock(sk)->oob_skb. This is wrong in terms of uAPI.

Let's say we send "hello" with MSG_OOB, and "world" without MSG_OOB. The 'o' is handled as OOB data. When recv() is called twice without MSG_OOB, the OOB data should be lost.

5

5

b'hell'

b'world'

b'o'

In the same situation, TCP actually returns -EINVAL for the last recv().

Also, if we do not clear unix_sk(sk)->oob_skb, unix_poll() always set EPOLLPRI even though the data has passed through by previous recv().

To avoid these issues, we must clear unix_sk(sk)->oob_skb when dequeuing it from recv queue.

The reason why the old GC did not trigger the deadlock is because the old GC relied on the receive queue to detect the loop.

When it is triggered, the socket with OOB data is marked as GC candidate because file refcount == inflight count (1). However, after traversing all inflight sockets, the socket still has a positive inflight count (1), thus the socket is excluded from candidates. Then, the old GC lose the chance to garbage-collect the socket.

With the old GC, the repro continues to create true garbage that will never be freed nor detected by kmemleak as it's linked to the global inflight list. That's why we couldn't even notice the issue.

---
 net/unix/af_unix.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

index 265dc665c92a2..27a88a738793f 100644
@@ -2567,7 +2567,9 @@ static struct sk_buff *manage_oob(struct sk_buff *skb, struct sock *sk,
 				}
 			} else if (!(flags & MSG_PEEK)) {
 				skb_unlink(skb, &sk->sk_receive_queue);
-				consume_skb(skb);
+				WRITE_ONCE(u->oob_skb, NULL);
+				if (!WARN_ON_ONCE(skb_unref(skb)))
+					kfree_skb(skb);
 				skb = skb_peek(&sk->sk_receive_queue);
 			}
 		}

2.43.0

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Geetha sowjanya <[email protected]>

[ Upstream commit faf23006185e777db18912685922c5ddb2df383f ]

NIX SQ mode and link backpressure configuration is required for all platforms. But in current driver this code is wrongly placed under specific platform check. This patch fixes the issue by moving the code out of platform check.

---
 .../ethernet/marvell/octeontx2/af/rvu_nix.c   | 20 +++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

index bda93e550b08a..34a9a9164f3c6 100644
@@ -4184,18 +4184,18 @@ static int rvu_nix_block_init(struct rvu *rvu, struct nix_hw *nix_hw)
 		 */
 		rvu_write64(rvu, blkaddr, NIX_AF_CFG,
 			    rvu_read64(rvu, blkaddr, NIX_AF_CFG) | 0x40ULL);
+	}
 
-		/* Set chan/link to backpressure TL3 instead of TL2 */
-		rvu_write64(rvu, blkaddr, NIX_AF_PSE_CHANNEL_LEVEL, 0x01);
+	/* Set chan/link to backpressure TL3 instead of TL2 */
+	rvu_write64(rvu, blkaddr, NIX_AF_PSE_CHANNEL_LEVEL, 0x01);
 
-		/* Disable SQ manager's sticky mode operation (set TM6 = 0)
-		 * This sticky mode is known to cause SQ stalls when multiple
-		 * SQs are mapped to same SMQ and transmitting pkts at a time.
-		 */
-		cfg = rvu_read64(rvu, blkaddr, NIX_AF_SQM_DBG_CTL_STATUS);
-		cfg &= ~BIT_ULL(15);
-		rvu_write64(rvu, blkaddr, NIX_AF_SQM_DBG_CTL_STATUS, cfg);
-	}
+	/* Disable SQ manager's sticky mode operation (set TM6 = 0)
+	 * This sticky mode is known to cause SQ stalls when multiple
+	 * SQs are mapped to same SMQ and transmitting pkts at a time.
+	 */
+	cfg = rvu_read64(rvu, blkaddr, NIX_AF_SQM_DBG_CTL_STATUS);
+	cfg &= ~BIT_ULL(15);
+	rvu_write64(rvu, blkaddr, NIX_AF_SQM_DBG_CTL_STATUS, cfg);
 
 	ltdefs = rvu->kpu.lt_def;
 	/* Calibrate X2P bus to check if CGX/LBK links are fine */

2.43.0

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <[email protected]>

[ Upstream commit 74043489fcb5e5ca4074133582b5b8011b67f9e7 ]

When CONFIG_IPV6_SUBTREES is disabled, the only user is hidden, causing a 'make W=1' warning:

net/ipv6/ip6_fib.c: In function 'fib6_add':
net/ipv6/ip6_fib.c:1388:32: error: variable 'pn' set but not used [-Werror=unused-but-set-variable]

Add another #ifdef around the variable declaration, matching the other uses in this file.

---
 net/ipv6/ip6_fib.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

index bbb9ed6d1ae6f..c0ff5ee490e7b 100644
@@ -1375,7 +1375,10 @@ int fib6_add(struct fib6_node *root, struct fib6_info *rt,
 	     struct nl_info *info, struct netlink_ext_ack *extack)
 {
 	struct fib6_table *table = rt->fib6_table;
-	struct fib6_node *fn, *pn = NULL;
+	struct fib6_node *fn;
+#ifdef CONFIG_IPV6_SUBTREES
+	struct fib6_node *pn = NULL;
+#endif
 	int err = -ENOMEM;
 	int allow_create = 1;
 	int replace_required = 0;

@@ -1399,9 +1402,9 @@ int fib6_add(struct fib6_node *root, struct fib6_info *rt,
 		goto out;
 	}
 
+#ifdef CONFIG_IPV6_SUBTREES
 	pn = fn;
 
-#ifdef CONFIG_IPV6_SUBTREES
 	if (rt->fib6_src.plen) {
 		struct fib6_node *sn;
 

2.43.0

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <[email protected]>

[ Upstream commit cf1b7201df59fb936f40f4a807433fe3f2ce310a ]

The log_martians variable is only used in an #ifdef, causing a 'make W=1' warning with gcc:

net/ipv4/route.c: In function 'ip_rt_send_redirect':
net/ipv4/route.c:880:13: error: variable 'log_martians' set but not used [-Werror=unused-but-set-variable]

Change the #ifdef to an equivalent IS_ENABLED() to let the compiler see where the variable is used.

---
 net/ipv4/route.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

index 12c59d700942f..4ff94596f8cd5 100644
@@ -933,13 +933,11 @@ void ip_rt_send_redirect(struct sk_buff *skb)
 		icmp_send(skb, ICMP_REDIRECT, ICMP_REDIR_HOST, gw);
 		peer->rate_last = jiffies;
 		++peer->n_redirects;
-#ifdef CONFIG_IP_ROUTE_VERBOSE
-		if (log_martians &&
+		if (IS_ENABLED(CONFIG_IP_ROUTE_VERBOSE) && log_martians &&
 		    peer->n_redirects == ip_rt_redirect_number)
 			net_warn_ratelimited("host %pI4/if%d ignores redirects for %pI4 to %pI4\n",
 					     &ip_hdr(skb)->saddr, inet_iif(skb),
 					     &ip_hdr(skb)->daddr, &gw);
-#endif
 	}
 out_put_peer:
 	inet_putpeer(peer);

2.43.0

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jiri Benc <[email protected]>

[ Upstream commit 7633c4da919ad51164acbf1aa322cc1a3ead6129 ]

Although ipv6_get_ifaddr walks inet6_addr_lst under the RCU lock, it still means hlist_for_each_entry_rcu can return an item that got removed from the list. The memory itself of such item is not freed thanks to RCU but nothing guarantees the actual content of the memory is sane.

In particular, the reference count can be zero. This can happen if ipv6_del_addr is called in parallel. ipv6_del_addr removes the entry from inet6_addr_lst (hlist_del_init_rcu(&ifp->addr_lst)) and drops all references (__in6_ifa_put(ifp) + in6_ifa_put(ifp)). With bad enough timing, this can happen:

1. In ipv6_get_ifaddr, hlist_for_each_entry_rcu returns an entry.

2. Then, the whole ipv6_del_addr is executed for the given entry. The reference count drops to zero and kfree_rcu is scheduled.

3. ipv6_get_ifaddr continues and tries to increments the reference count (in6_ifa_hold).

4. The rcu is unlocked and the entry is freed.

5. The freed entry is returned.

Prevent increasing of the reference count in such case. The name in6_ifa_hold_safe is chosen to mimic the existing fib6_info_hold_safe.

[   41.506330] refcount_t: addition on 0; use-after-free.
[   41.506760] WARNING: CPU: 0 PID: 595 at lib/refcount.c:25 refcount_warn_saturate+0xa5/0x130
[   41.507413] Modules linked in: veth bridge stp llc
[   41.507821] CPU: 0 PID: 595 Comm: python3 Not tainted 6.9.0-rc2.main-00208-g49563be82afa #14
[   41.508479] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
[   41.509163] RIP: 0010:refcount_warn_saturate+0xa5/0x130
[   41.509586] Code: ad ff 90 0f 0b 90 90 c3 cc cc cc cc 80 3d c0 30 ad 01 00 75 a0 c6 05 b7 30 ad 01 01 90 48 c7 c7 38 cc 7a 8c e8 cc 18 ad ff 90 <0f> 0b 90 90 c3 cc cc cc cc 80 3d 98 30 ad 01 00 0f 85 75 ff ff ff
[   41.510956] RSP: 0018:ffffbda3c026baf0 EFLAGS: 00010282
[   41.511368] RAX: 0000000000000000 RBX: ffff9e9c46914800 RCX: 0000000000000000
[   41.511910] RDX: ffff9e9c7ec29c00 RSI: ffff9e9c7ec1c900 RDI: ffff9e9c7ec1c900
[   41.512445] RBP: ffff9e9c43660c9c R08: 0000000000009ffb R09: 00000000ffffdfff
[   41.512998] R10: 00000000ffffdfff R11: ffffffff8ca58a40 R12: ffff9e9c4339a000
[   41.513534] R13: 0000000000000001 R14: ffff9e9c438a0000 R15: ffffbda3c026bb48
[   41.514086] FS:  00007fbc4cda1740(0000) GS:ffff9e9c7ec00000(0000) knlGS:0000000000000000
[   41.514726] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   41.515176] CR2: 000056233b337d88 CR3: 000000000376e006 CR4: 0000000000370ef0
[   41.515713] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   41.516252] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   41.516799] Call Trace:
[   41.517037]  <TASK>
[   41.517249]  ? __warn+0x7b/0x120
[   41.517535]  ? refcount_warn_saturate+0xa5/0x130
[   41.517923]  ? report_bug+0x164/0x190
[   41.518240]  ? handle_bug+0x3d/0x70
[   41.518541]  ? exc_invalid_op+0x17/0x70
[   41.520972]  ? asm_exc_invalid_op+0x1a/0x20
[   41.521325]  ? refcount_warn_saturate+0xa5/0x130
[   41.521708]  ipv6_get_ifaddr+0xda/0xe0
[   41.522035]  inet6_rtm_getaddr+0x342/0x3f0
[   41.522376]  ? __pfx_inet6_rtm_getaddr+0x10/0x10
[   41.522758]  rtnetlink_rcv_msg+0x334/0x3d0
[   41.523102]  ? netlink_unicast+0x30f/0x390
[   41.523445]  ? __pfx_rtnetlink_rcv_msg+0x10/0x10
[   41.523832]  netlink_rcv_skb+0x53/0x100
[   41.524157]  netlink_unicast+0x23b/0x390
[   41.524484]  netlink_sendmsg+0x1f2/0x440
[   41.524826]  __sys_sendto+0x1d8/0x1f0
[   41.525145]  __x64_sys_sendto+0x1f/0x30
[   41.525467]  do_syscall_64+0xa5/0x1b0
[   41.525794]  entry_SYSCALL_64_after_hwframe+0x72/0x7a
[   41.526213] RIP: 0033:0x7fbc4cfcea9a
[   41.526528] Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89
[   41.527942] RSP: 002b:00007ffcf54012a8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
[   41.528593] RAX: ffffffffffffffda RBX: 00007ffcf5401368 RCX: 00007fbc4cfcea9a
[   41.529173] RDX: 000000000000002c RSI: 00007fbc4b9d9bd0 RDI: 0000000000000005
[   41.529786] RBP: 00007fbc4bafb040 R08: 00007ffcf54013e0 R09: 000000000000000c
[   41.530375] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[   41.530977] R13: ffffffffc4653600 R14: 0000000000000001 R15: 00007fbc4ca85d1b
[   41.531573]  </TASK>

---
 include/net/addrconf.h | 4 ++++
 net/ipv6/addrconf.c    | 7 ++++---
 2 files changed, 8 insertions(+), 3 deletions(-)

index 700a19e0455e6..5cf1a73774078 100644
@@ -435,6 +435,10 @@ static inline void in6_ifa_hold(struct inet6_ifaddr *ifp)
 	refcount_inc(&ifp->refcnt);
 }
 
+static inline bool in6_ifa_hold_safe(struct inet6_ifaddr *ifp)
+{
+	return refcount_inc_not_zero(&ifp->refcnt);
+}
 
 /*
  *	compute link-local solicited-node multicast address

index 968ca078191cd..a17e1d744b2d0 100644
@@ -2054,9 +2054,10 @@ struct inet6_ifaddr *ipv6_get_ifaddr(struct net *net, const struct in6_addr *add
 		if (ipv6_addr_equal(&ifp->addr, addr)) {
 			if (!dev || ifp->idev->dev == dev ||
 			    !(ifp->scope&(IFA_LINK|IFA_HOST) || strict)) {
-				result = ifp;
-				in6_ifa_hold(ifp);
-				break;
+				if (in6_ifa_hold_safe(ifp)) {
+					result = ifp;
+					break;
+				}
 			}
 		}
 	}

2.43.0

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit 65acf6e0501ac8880a4f73980d01b5d27648b956 ]

In my recent commit, I missed that do_replace() handlers use copy_from_sockptr() (which I fixed), followed by unsafe copy_from_sockptr_offset() calls.

In all functions, we can perform the @optlen validation before even calling xt_alloc_table_info() with the following check:

if ((u64)optlen < (u64)tmp.size + sizeof(tmp))

        return -EINVAL;

---
 net/ipv4/netfilter/arp_tables.c | 4 ++++
 net/ipv4/netfilter/ip_tables.c  | 4 ++++
 net/ipv6/netfilter/ip6_tables.c | 4 ++++
 3 files changed, 12 insertions(+)

index 07ecb16231cd0..a9d5a1973224a 100644
@@ -965,6 +965,8 @@ static int do_replace(struct net *net, sockptr_t arg, unsigned int len)
 		return -ENOMEM;
 	if (tmp.num_counters == 0)
 		return -EINVAL;
+	if ((u64)len < (u64)tmp.size + sizeof(tmp))
+		return -EINVAL;
 
 	tmp.name[sizeof(tmp.name)-1] = 0;
 

@@ -1265,6 +1267,8 @@ static int compat_do_replace(struct net *net, sockptr_t arg, unsigned int len)
 		return -ENOMEM;
 	if (tmp.num_counters == 0)
 		return -EINVAL;
+	if ((u64)len < (u64)tmp.size + sizeof(tmp))
+		return -EINVAL;
 
 	tmp.name[sizeof(tmp.name)-1] = 0;
 

index 1e1e7488d6bf1..aee7cd584c926 100644
@@ -1119,6 +1119,8 @@ do_replace(struct net *net, sockptr_t arg, unsigned int len)
 		return -ENOMEM;
 	if (tmp.num_counters == 0)
 		return -EINVAL;
+	if ((u64)len < (u64)tmp.size + sizeof(tmp))
+		return -EINVAL;
 
 	tmp.name[sizeof(tmp.name)-1] = 0;
 

@@ -1505,6 +1507,8 @@ compat_do_replace(struct net *net, sockptr_t arg, unsigned int len)
 		return -ENOMEM;
 	if (tmp.num_counters == 0)
 		return -EINVAL;
+	if ((u64)len < (u64)tmp.size + sizeof(tmp))
+		return -EINVAL;
 
 	tmp.name[sizeof(tmp.name)-1] = 0;
 

index b17990d514ee9..afd22ea9f555b 100644
@@ -1137,6 +1137,8 @@ do_replace(struct net *net, sockptr_t arg, unsigned int len)
 		return -ENOMEM;
 	if (tmp.num_counters == 0)
 		return -EINVAL;
+	if ((u64)len < (u64)tmp.size + sizeof(tmp))
+		return -EINVAL;
 
 	tmp.name[sizeof(tmp.name)-1] = 0;
 

@@ -1515,6 +1517,8 @@ compat_do_replace(struct net *net, sockptr_t arg, unsigned int len)
 		return -ENOMEM;
 	if (tmp.num_counters == 0)
 		return -EINVAL;
+	if ((u64)len < (u64)tmp.size + sizeof(tmp))
+		return -EINVAL;
 
 	tmp.name[sizeof(tmp.name)-1] = 0;
 

2.43.0

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Cosmin Ratiu <[email protected]>

[ Upstream commit 7c6782ad4911cbee874e85630226ed389ff2e453 ]

Previously, add_rule_fg would only add newly created rules from the handle into the tree when they had a refcount of 1. On the other hand, create_flow_handle tries hard to find and reference already existing identical rules instead of creating new ones.

These two behaviors can result in a situation where create_flow_handle
1) creates a new rule and references it, then
2) in a subsequent step during the same handle creation references it again,
resulting in a rule with a refcount of 2 that is not linked into the tree, will have a NULL parent and root and will result in a crash when the flow group is deleted because del_sw_hw_rule, invoked on rule deletion, assumes node->parent is != NULL.

This happened in the wild, due to another bug related to incorrect handling of duplicate pkt_reformat ids, which lead to the code in create_flow_handle incorrectly referencing a just-added rule in the same flow handle, resulting in the problem described above. Full details are at [1].

This patch changes add_rule_fg to add new rules without parents into the tree, properly initializing them and avoiding the crash. This makes it more consistent with how rules are added to an FTE in create_flow_handle.

---
 drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

index 161ad2ae40196..a55cacb988ac2 100644
@@ -1682,8 +1682,9 @@ static struct mlx5_flow_handle *add_rule_fg(struct mlx5_flow_group *fg,
 	}
 	trace_mlx5_fs_set_fte(fte, false);
 
+	/* Link newly added rules into the tree. */
 	for (i = 0; i < handle->num_rules; i++) {
-		if (refcount_read(&handle->rule[i]->node.refcount) == 1) {
+		if (!handle->rule[i]->node.parent) {
 			tree_add_node(&handle->rule[i]->node, &fte->node);
 			trace_mlx5_fs_add_rule(handle->rule[i]);
 		}

2.43.0

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Daniel Machon <[email protected]>

[ Upstream commit 33623113a48ea906f1955cbf71094f6aa4462e8f ]

The wrong port config is being used if the PCS is reconfigured. Fix this by correctly using the new config instead of the old one.

---
 drivers/net/ethernet/microchip/sparx5/sparx5_port.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index 189a6a0a2e08a..8561a7bf53e19 100644
@@ -730,7 +730,7 @@ static int sparx5_port_pcs_low_set(struct sparx5 *sparx5,
 	bool sgmii = false, inband_aneg = false;
 	int err;
 
-	if (port->conf.inband) {
+	if (conf->inband) {
 		if (conf->portmode == PHY_INTERFACE_MODE_SGMII ||
 		    conf->portmode == PHY_INTERFACE_MODE_QSGMII)
 			inband_aneg = true; /* Cisco-SGMII in-band-aneg */

@@ -947,7 +947,7 @@ int sparx5_port_pcs_set(struct sparx5 *sparx5,
 	if (err)
 		return -EINVAL;
 
-	if (port->conf.inband) {
+	if (conf->inband) {
 		/* Enable/disable 1G counters in ASM */
 		spx5_rmw(ASM_PORT_CFG_CSC_STAT_DIS_SET(high_speed_dev),
 			 ASM_PORT_CFG_CSC_STAT_DIS,

2.43.0

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Arınç ÜNAL <[email protected]>

[ Upstream commit 17c560113231ddc20088553c7b499b289b664311 ]

In Clause 5 of IEEE Std 802-2014, two sublayers of the data link layer (DLL) of the Open Systems Interconnection basic reference model (OSI/RM) are described; the medium access control (MAC) and logical link control (LLC) sublayers. The MAC sublayer is the one facing the physical layer.

In 8.2 of IEEE Std 802.1Q-2022, the Bridge architecture is described. A Bridge component comprises a MAC Relay Entity for interconnecting the Ports of the Bridge, at least two Ports, and higher layer entities with at least a Spanning Tree Protocol Entity included.

Each Bridge Port also functions as an end station and shall provide the MAC Service to an LLC Entity. Each instance of the MAC Service is provided to a distinct LLC Entity that supports protocol identification, multiplexing, and demultiplexing, for protocol data unit (PDU) transmission and reception by one or more higher layer entities.

It is described in 8.13.9 of IEEE Std 802.1Q-2022 that in a Bridge, the LLC Entity associated with each Bridge Port is modeled as being directly connected to the attached Local Area Network (LAN).

On the switch with CPU port architecture, CPU port functions as Management Port, and the Management Port functionality is provided by software which functions as an end station. Software is connected to an IEEE 802 LAN that is wholly contained within the system that incorporates the Bridge. Software provides access to the LLC Entity associated with each Bridge Port by the value of the source port field on the special tag on the frame received by software.

We call frames that carry control information to determine the active topology and current extent of each Virtual Local Area Network (VLAN), i.e., spanning tree or Shortest Path Bridging (SPB) and Multiple VLAN Registration Protocol Data Units (MVRPDUs), and frames from other link constrained protocols, such as Extensible Authentication Protocol over LAN (EAPOL) and Link Layer Discovery Protocol (LLDP), link-local frames. They are not forwarded by a Bridge. Permanently configured entries in the filtering database (FDB) ensure that such frames are discarded by the Forwarding Process. In 8.6.3 of IEEE Std 802.1Q-2022, this is described in detail:

Each of the reserved MAC addresses specified in Table 8-1 (01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]) shall be permanently configured in the FDB in C-VLAN components and ERs.

Each of the reserved MAC addresses specified in Table 8-2 (01-80-C2-00-00-[01,02,03,04,05,06,07,08,09,0A,0E]) shall be permanently configured in the FDB in S-VLAN components.

Each of the reserved MAC addresses specified in Table 8-3 (01-80-C2-00-00-[01,02,04,0E]) shall be permanently configured in the FDB in TPMR components.

The FDB entries for reserved MAC addresses shall specify filtering for all Bridge Ports and all VIDs. Management shall not provide the capability to modify or remove entries for reserved MAC addresses.

The addresses in Table 8-1, Table 8-2, and Table 8-3 determine the scope of propagation of PDUs within a Bridged Network, as follows:

The Nearest Bridge group address (01-80-C2-00-00-0E) is an address that no conformant Two-Port MAC Relay (TPMR) component, Service VLAN (S-VLAN) component, Customer VLAN (C-VLAN) component, or MAC Bridge can forward. PDUs transmitted using this destination address, or any other addresses that appear in Table 8-1, Table 8-2, and Table 8-3 (01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]), can therefore travel no further than those stations that can be reached via a single individual LAN from the originating station.

The Nearest non-TPMR Bridge group address (01-80-C2-00-00-03), is an address that no conformant S-VLAN component, C-VLAN component, or MAC Bridge can forward; however, this address is relayed by a TPMR component. PDUs using this destination address, or any of the other addresses that appear in both Table 8-1 and Table 8-2 but not in Table 8-3 (01-80-C2-00-00-[00,03,05,06,07,08,09,0A,0B,0C,0D,0F]), will be relayed by any TPMRs but will propagate no further than the nearest S-VLAN component, C-VLAN component, or MAC Bridge.

The Nearest Customer Bridge group address (01-80-C2-00-00-00) is an address that no conformant C-VLAN component, MAC Bridge can forward; however, it is relayed by TPMR components and S-VLAN components. PDUs using this destination address, or any of the other addresses that appear in Table 8-1 but not in either Table 8-2 or Table 8-3 (01-80-C2-00-00-[00,0B,0C,0D,0F]), will be relayed by TPMR components and S-VLAN components but will propagate no further than the nearest C-VLAN component or MAC Bridge.

Because the LLC Entity associated with each Bridge Port is provided via CPU port, we must not filter these frames but forward them to CPU port.

In a Bridge, the transmission Port is majorly decided by ingress and egress rules, FDB, and spanning tree Port State functions of the Forwarding Process. For link-local frames, only CPU port should be designated as destination port in the FDB, and the other functions of the Forwarding Process must not interfere with the decision of the transmission Port. We call this process trapping frames to CPU port.

Therefore, on the switch with CPU port architecture, link-local frames must be trapped to CPU port, and certain link-local frames received by a Port of a Bridge comprising a TPMR component or an S-VLAN component must be excluded from it.

A Bridge of the switch with CPU port architecture cannot comprise a Two-Port MAC Relay (TPMR) component as a TPMR component supports only a subset of the functionality of a MAC Bridge. A Bridge comprising two Ports (Management Port doesn't count) of this architecture will either function as a standard MAC Bridge or a standard VLAN Bridge.

Therefore, a Bridge of this architecture can only comprise S-VLAN components, C-VLAN components, or MAC Bridge components. Since there's no TPMR component, we don't need to relay PDUs using the destination addresses specified on the Nearest non-TPMR section, and the proportion of the Nearest Customer Bridge section where they must be relayed by TPMR components.

One option to trap link-local frames to CPU port is to add static FDB entries with CPU port designated as destination port. However, because that Independent VLAN Learning (IVL) is being used on every VID, each entry only applies to a single VLAN Identifier (VID). For a Bridge comprising a MAC Bridge component or a C-VLAN component, there would have to be 16 times 4096 entries. This switch intellectual property can only hold a maximum of 2048 entries. Using this option, there also isn't a mechanism to prevent link-local frames from being discarded when the spanning tree Port State of the reception Port is discarding.

The remaining option is to utilise the BPC, RGAC1, RGAC2, RGAC3, and RGAC4 registers. Whilst this applies to every VID, it doesn't contain all of the reserved MAC addresses without affecting the remaining Standard Group MAC Addresses. The REV_UN frame tag utilised using the RGAC4 register covers the remaining 01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F] destination addresses. It also includes the 01-80-C2-00-00-22 to 01-80-C2-00-00-FF destination addresses which may be relayed by MAC Bridges or VLAN Bridges. The latter option provides better but not complete conformance.

This switch intellectual property also does not provide a mechanism to trap link-local frames with specific destination addresses to CPU port by Bridge, to conform to the filtering rules for the distinct Bridge components.

Therefore, regardless of the type of the Bridge component, link-local frames with these destination addresses will be trapped to CPU port:

01-80-C2-00-00-[00,01,02,03,0E]

In a Bridge comprising a MAC Bridge component or a C-VLAN component:

Link-local frames with these destination addresses won't be trapped to CPU port which won't conform to IEEE Std 802.1Q-2022:

01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F]

In a Bridge comprising an S-VLAN component:

Link-local frames with these destination addresses will be trapped to CPU port which won't conform to IEEE Std 802.1Q-2022:

01-80-C2-00-00-00

Link-local frames with these destination addresses won't be trapped to CPU port which won't conform to IEEE Std 802.1Q-2022:

01-80-C2-00-00-[04,05,06,07,08,09,0A]

Currently on this switch intellectual property, if the spanning tree Port State of the reception Port is discarding, link-local frames will be discarded.

To trap link-local frames regardless of the spanning tree Port State, make the switch regard them as Bridge Protocol Data Units (BPDUs). This switch intellectual property only lets the frames regarded as BPDUs bypass the spanning tree Port State function of the Forwarding Process.

With this change, the only remaining interference is the ingress rules. When the reception Port has no PVID assigned on software, VLAN-untagged frames won't be allowed in. There doesn't seem to be a mechanism on the switch intellectual property to have link-local frames bypass this function of the Forwarding Process.

---
 drivers/net/dsa/mt7530.c | 229 +++++++++++++++++++++++++++++++++------
 drivers/net/dsa/mt7530.h |   5 +
 2 files changed, 200 insertions(+), 34 deletions(-)

index 14c47e614d337..f291d1e70f807 100644
@@ -994,20 +994,173 @@ static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface)
 	mutex_unlock(&priv->reg_mutex);
 }
 
-/* On page 205, section "8.6.3 Frame filtering" of the active standard, IEEE Std
- * 802.1Q™-2022, it is stated that frames with 01:80:C2:00:00:00-0F as MAC DA
- * must only be propagated to C-VLAN and MAC Bridge components. That means
- * VLAN-aware and VLAN-unaware bridges. On the switch designs with CPU ports,
- * these frames are supposed to be processed by the CPU (software). So we make
- * the switch only forward them to the CPU port. And if received from a CPU
- * port, forward to a single port. The software is responsible of making the
- * switch conform to the latter by setting a single port as destination port on
- * the special tag.
+/* In Clause 5 of IEEE Std 802-2014, two sublayers of the data link layer (DLL)
+ * of the Open Systems Interconnection basic reference model (OSI/RM) are
+ * described; the medium access control (MAC) and logical link control (LLC)
+ * sublayers. The MAC sublayer is the one facing the physical layer.
  *
- * This switch intellectual property cannot conform to this part of the standard
- * fully. Whilst the REV_UN frame tag covers the remaining :04-0D and :0F MAC
- * DAs, it also includes :22-FF which the scope of propagation is not supposed
- * to be restricted for these MAC DAs.
+ * In 8.2 of IEEE Std 802.1Q-2022, the Bridge architecture is described. A
+ * Bridge component comprises a MAC Relay Entity for interconnecting the Ports
+ * of the Bridge, at least two Ports, and higher layer entities with at least a
+ * Spanning Tree Protocol Entity included.
+ *
+ * Each Bridge Port also functions as an end station and shall provide the MAC
+ * Service to an LLC Entity. Each instance of the MAC Service is provided to a
+ * distinct LLC Entity that supports protocol identification, multiplexing, and
+ * demultiplexing, for protocol data unit (PDU) transmission and reception by
+ * one or more higher layer entities.
+ *
+ * It is described in 8.13.9 of IEEE Std 802.1Q-2022 that in a Bridge, the LLC
+ * Entity associated with each Bridge Port is modeled as being directly
+ * connected to the attached Local Area Network (LAN).
+ *
+ * On the switch with CPU port architecture, CPU port functions as Management
+ * Port, and the Management Port functionality is provided by software which
+ * functions as an end station. Software is connected to an IEEE 802 LAN that is
+ * wholly contained within the system that incorporates the Bridge. Software
+ * provides access to the LLC Entity associated with each Bridge Port by the
+ * value of the source port field on the special tag on the frame received by
+ * software.
+ *
+ * We call frames that carry control information to determine the active
+ * topology and current extent of each Virtual Local Area Network (VLAN), i.e.,
+ * spanning tree or Shortest Path Bridging (SPB) and Multiple VLAN Registration
+ * Protocol Data Units (MVRPDUs), and frames from other link constrained
+ * protocols, such as Extensible Authentication Protocol over LAN (EAPOL) and
+ * Link Layer Discovery Protocol (LLDP), link-local frames. They are not
+ * forwarded by a Bridge. Permanently configured entries in the filtering
+ * database (FDB) ensure that such frames are discarded by the Forwarding
+ * Process. In 8.6.3 of IEEE Std 802.1Q-2022, this is described in detail:
+ *
+ * Each of the reserved MAC addresses specified in Table 8-1
+ * (01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]) shall be
+ * permanently configured in the FDB in C-VLAN components and ERs.
+ *
+ * Each of the reserved MAC addresses specified in Table 8-2
+ * (01-80-C2-00-00-[01,02,03,04,05,06,07,08,09,0A,0E]) shall be permanently
+ * configured in the FDB in S-VLAN components.
+ *
+ * Each of the reserved MAC addresses specified in Table 8-3
+ * (01-80-C2-00-00-[01,02,04,0E]) shall be permanently configured in the FDB in
+ * TPMR components.
+ *
+ * The FDB entries for reserved MAC addresses shall specify filtering for all
+ * Bridge Ports and all VIDs. Management shall not provide the capability to
+ * modify or remove entries for reserved MAC addresses.
+ *
+ * The addresses in Table 8-1, Table 8-2, and Table 8-3 determine the scope of
+ * propagation of PDUs within a Bridged Network, as follows:
+ *
+ *   The Nearest Bridge group address (01-80-C2-00-00-0E) is an address that no
+ *   conformant Two-Port MAC Relay (TPMR) component, Service VLAN (S-VLAN)
+ *   component, Customer VLAN (C-VLAN) component, or MAC Bridge can forward.
+ *   PDUs transmitted using this destination address, or any other addresses
+ *   that appear in Table 8-1, Table 8-2, and Table 8-3
+ *   (01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]), can
+ *   therefore travel no further than those stations that can be reached via a
+ *   single individual LAN from the originating station.
+ *
+ *   The Nearest non-TPMR Bridge group address (01-80-C2-00-00-03), is an
+ *   address that no conformant S-VLAN component, C-VLAN component, or MAC
+ *   Bridge can forward; however, this address is relayed by a TPMR component.
+ *   PDUs using this destination address, or any of the other addresses that
+ *   appear in both Table 8-1 and Table 8-2 but not in Table 8-3
+ *   (01-80-C2-00-00-[00,03,05,06,07,08,09,0A,0B,0C,0D,0F]), will be relayed by
+ *   any TPMRs but will propagate no further than the nearest S-VLAN component,
+ *   C-VLAN component, or MAC Bridge.
+ *
+ *   The Nearest Customer Bridge group address (01-80-C2-00-00-00) is an address
+ *   that no conformant C-VLAN component, MAC Bridge can forward; however, it is
+ *   relayed by TPMR components and S-VLAN components. PDUs using this
+ *   destination address, or any of the other addresses that appear in Table 8-1
+ *   but not in either Table 8-2 or Table 8-3 (01-80-C2-00-00-[00,0B,0C,0D,0F]),
+ *   will be relayed by TPMR components and S-VLAN components but will propagate
+ *   no further than the nearest C-VLAN component or MAC Bridge.
+ *
+ * Because the LLC Entity associated with each Bridge Port is provided via CPU
+ * port, we must not filter these frames but forward them to CPU port.
+ *
+ * In a Bridge, the transmission Port is majorly decided by ingress and egress
+ * rules, FDB, and spanning tree Port State functions of the Forwarding Process.
+ * For link-local frames, only CPU port should be designated as destination port
+ * in the FDB, and the other functions of the Forwarding Process must not
+ * interfere with the decision of the transmission Port. We call this process
+ * trapping frames to CPU port.
+ *
+ * Therefore, on the switch with CPU port architecture, link-local frames must
+ * be trapped to CPU port, and certain link-local frames received by a Port of a
+ * Bridge comprising a TPMR component or an S-VLAN component must be excluded
+ * from it.
+ *
+ * A Bridge of the switch with CPU port architecture cannot comprise a Two-Port
+ * MAC Relay (TPMR) component as a TPMR component supports only a subset of the
+ * functionality of a MAC Bridge. A Bridge comprising two Ports (Management Port
+ * doesn't count) of this architecture will either function as a standard MAC
+ * Bridge or a standard VLAN Bridge.
+ *
+ * Therefore, a Bridge of this architecture can only comprise S-VLAN components,
+ * C-VLAN components, or MAC Bridge components. Since there's no TPMR component,
+ * we don't need to relay PDUs using the destination addresses specified on the
+ * Nearest non-TPMR section, and the proportion of the Nearest Customer Bridge
+ * section where they must be relayed by TPMR components.
+ *
+ * One option to trap link-local frames to CPU port is to add static FDB entries
+ * with CPU port designated as destination port. However, because that
+ * Independent VLAN Learning (IVL) is being used on every VID, each entry only
+ * applies to a single VLAN Identifier (VID). For a Bridge comprising a MAC
+ * Bridge component or a C-VLAN component, there would have to be 16 times 4096
+ * entries. This switch intellectual property can only hold a maximum of 2048
+ * entries. Using this option, there also isn't a mechanism to prevent
+ * link-local frames from being discarded when the spanning tree Port State of
+ * the reception Port is discarding.
+ *
+ * The remaining option is to utilise the BPC, RGAC1, RGAC2, RGAC3, and RGAC4
+ * registers. Whilst this applies to every VID, it doesn't contain all of the
+ * reserved MAC addresses without affecting the remaining Standard Group MAC
+ * Addresses. The REV_UN frame tag utilised using the RGAC4 register covers the
+ * remaining 01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F] destination
+ * addresses. It also includes the 01-80-C2-00-00-22 to 01-80-C2-00-00-FF
+ * destination addresses which may be relayed by MAC Bridges or VLAN Bridges.
+ * The latter option provides better but not complete conformance.
+ *
+ * This switch intellectual property also does not provide a mechanism to trap
+ * link-local frames with specific destination addresses to CPU port by Bridge,
+ * to conform to the filtering rules for the distinct Bridge components.
+ *
+ * Therefore, regardless of the type of the Bridge component, link-local frames
+ * with these destination addresses will be trapped to CPU port:
+ *
+ * 01-80-C2-00-00-[00,01,02,03,0E]
+ *
+ * In a Bridge comprising a MAC Bridge component or a C-VLAN component:
+ *
+ *   Link-local frames with these destination addresses won't be trapped to CPU
+ *   port which won't conform to IEEE Std 802.1Q-2022:
+ *
+ *   01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F]
+ *
+ * In a Bridge comprising an S-VLAN component:
+ *
+ *   Link-local frames with these destination addresses will be trapped to CPU
+ *   port which won't conform to IEEE Std 802.1Q-2022:
+ *
+ *   01-80-C2-00-00-00
+ *
+ *   Link-local frames with these destination addresses won't be trapped to CPU
+ *   port which won't conform to IEEE Std 802.1Q-2022:
+ *
+ *   01-80-C2-00-00-[04,05,06,07,08,09,0A]
+ *
+ * To trap link-local frames to CPU port as conformant as this switch
+ * intellectual property can allow, link-local frames are made to be regarded as
+ * Bridge Protocol Data Units (BPDUs). This is because this switch intellectual
+ * property only lets the frames regarded as BPDUs bypass the spanning tree Port
+ * State function of the Forwarding Process.
+ *
+ * The only remaining interference is the ingress rules. When the reception Port
+ * has no PVID assigned on software, VLAN-untagged frames won't be allowed in.
+ * There doesn't seem to be a mechanism on the switch intellectual property to
+ * have link-local frames bypass this function of the Forwarding Process.
  */
 static void
 mt753x_trap_frames(struct mt7530_priv *priv)

@@ -1015,35 +1168,43 @@ mt753x_trap_frames(struct mt7530_priv *priv)
 	/* Trap 802.1X PAE frames and BPDUs to the CPU port(s) and egress them
 	 * VLAN-untagged.
 	 */
-	mt7530_rmw(priv, MT753X_BPC, MT753X_PAE_EG_TAG_MASK |
-		   MT753X_PAE_PORT_FW_MASK | MT753X_BPDU_EG_TAG_MASK |
-		   MT753X_BPDU_PORT_FW_MASK,
-		   MT753X_PAE_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-		   MT753X_PAE_PORT_FW(MT753X_BPDU_CPU_ONLY) |
-		   MT753X_BPDU_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-		   MT753X_BPDU_CPU_ONLY);
+	mt7530_rmw(priv, MT753X_BPC,
+		   MT753X_PAE_BPDU_FR | MT753X_PAE_EG_TAG_MASK |
+			   MT753X_PAE_PORT_FW_MASK | MT753X_BPDU_EG_TAG_MASK |
+			   MT753X_BPDU_PORT_FW_MASK,
+		   MT753X_PAE_BPDU_FR |
+			   MT753X_PAE_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+			   MT753X_PAE_PORT_FW(MT753X_BPDU_CPU_ONLY) |
+			   MT753X_BPDU_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+			   MT753X_BPDU_CPU_ONLY);
 
 	/* Trap frames with :01 and :02 MAC DAs to the CPU port(s) and egress
 	 * them VLAN-untagged.
 	 */
-	mt7530_rmw(priv, MT753X_RGAC1, MT753X_R02_EG_TAG_MASK |
-		   MT753X_R02_PORT_FW_MASK | MT753X_R01_EG_TAG_MASK |
-		   MT753X_R01_PORT_FW_MASK,
-		   MT753X_R02_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-		   MT753X_R02_PORT_FW(MT753X_BPDU_CPU_ONLY) |
-		   MT753X_R01_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-		   MT753X_BPDU_CPU_ONLY);
+	mt7530_rmw(priv, MT753X_RGAC1,
+		   MT753X_R02_BPDU_FR | MT753X_R02_EG_TAG_MASK |
+			   MT753X_R02_PORT_FW_MASK | MT753X_R01_BPDU_FR |
+			   MT753X_R01_EG_TAG_MASK | MT753X_R01_PORT_FW_MASK,
+		   MT753X_R02_BPDU_FR |
+			   MT753X_R02_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+			   MT753X_R02_PORT_FW(MT753X_BPDU_CPU_ONLY) |
+			   MT753X_R01_BPDU_FR |
+			   MT753X_R01_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+			   MT753X_BPDU_CPU_ONLY);
 
 	/* Trap frames with :03 and :0E MAC DAs to the CPU port(s) and egress
 	 * them VLAN-untagged.
 	 */
-	mt7530_rmw(priv, MT753X_RGAC2, MT753X_R0E_EG_TAG_MASK |
-		   MT753X_R0E_PORT_FW_MASK | MT753X_R03_EG_TAG_MASK |
-		   MT753X_R03_PORT_FW_MASK,
-		   MT753X_R0E_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-		   MT753X_R0E_PORT_FW(MT753X_BPDU_CPU_ONLY) |
-		   MT753X_R03_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-		   MT753X_BPDU_CPU_ONLY);
+	mt7530_rmw(priv, MT753X_RGAC2,
+		   MT753X_R0E_BPDU_FR | MT753X_R0E_EG_TAG_MASK |
+			   MT753X_R0E_PORT_FW_MASK | MT753X_R03_BPDU_FR |
+			   MT753X_R03_EG_TAG_MASK | MT753X_R03_PORT_FW_MASK,
+		   MT753X_R0E_BPDU_FR |
+			   MT753X_R0E_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+			   MT753X_R0E_PORT_FW(MT753X_BPDU_CPU_ONLY) |
+			   MT753X_R03_BPDU_FR |
+			   MT753X_R03_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+			   MT753X_BPDU_CPU_ONLY);
 }
 
 static int

index 03598f9ae288c..299a26ad5809c 100644
@@ -64,6 +64,7 @@ enum mt753x_id {
 
 /* Registers for BPDU and PAE frame control*/
 #define MT753X_BPC			0x24
+#define  MT753X_PAE_BPDU_FR		BIT(25)
 #define  MT753X_PAE_EG_TAG_MASK		GENMASK(24, 22)
 #define  MT753X_PAE_EG_TAG(x)		FIELD_PREP(MT753X_PAE_EG_TAG_MASK, x)
 #define  MT753X_PAE_PORT_FW_MASK	GENMASK(18, 16)

@@ -74,20 +75,24 @@ enum mt753x_id {
 
 /* Register for :01 and :02 MAC DA frame control */
 #define MT753X_RGAC1			0x28
+#define  MT753X_R02_BPDU_FR		BIT(25)
 #define  MT753X_R02_EG_TAG_MASK		GENMASK(24, 22)
 #define  MT753X_R02_EG_TAG(x)		FIELD_PREP(MT753X_R02_EG_TAG_MASK, x)
 #define  MT753X_R02_PORT_FW_MASK	GENMASK(18, 16)
 #define  MT753X_R02_PORT_FW(x)		FIELD_PREP(MT753X_R02_PORT_FW_MASK, x)
+#define  MT753X_R01_BPDU_FR		BIT(9)
 #define  MT753X_R01_EG_TAG_MASK		GENMASK(8, 6)
 #define  MT753X_R01_EG_TAG(x)		FIELD_PREP(MT753X_R01_EG_TAG_MASK, x)
 #define  MT753X_R01_PORT_FW_MASK	GENMASK(2, 0)
 
 /* Register for :03 and :0E MAC DA frame control */
 #define MT753X_RGAC2			0x2c
+#define  MT753X_R0E_BPDU_FR		BIT(25)
 #define  MT753X_R0E_EG_TAG_MASK		GENMASK(24, 22)
 #define  MT753X_R0E_EG_TAG(x)		FIELD_PREP(MT753X_R0E_EG_TAG_MASK, x)
 #define  MT753X_R0E_PORT_FW_MASK	GENMASK(18, 16)
 #define  MT753X_R0E_PORT_FW(x)		FIELD_PREP(MT753X_R0E_PORT_FW_MASK, x)
+#define  MT753X_R03_BPDU_FR		BIT(9)
 #define  MT753X_R03_EG_TAG_MASK		GENMASK(8, 6)
 #define  MT753X_R03_EG_TAG(x)		FIELD_PREP(MT753X_R03_EG_TAG_MASK, x)
 #define  MT753X_R03_PORT_FW_MASK	GENMASK(2, 0)

2.43.0

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Kuniyuki Iwashima <[email protected]>

[ Upstream commit 97af84a6bba2ab2b9c704c08e67de3b5ea551bb2 ]

When touching unix_sk(sk)->inflight, we are always under spin_lock(&unix_gc_lock).

Let's convert unix_sk(sk)->inflight to the normal unsigned long.

Stable-dep-of: 47d8ac011fe1 ("af_unix: Fix garbage collector racing against connect()")

---
 include/net/af_unix.h |  2 +-
 net/unix/af_unix.c    |  4 ++--
 net/unix/garbage.c    | 17 ++++++++---------
 net/unix/scm.c        |  8 +++++---
 4 files changed, 16 insertions(+), 15 deletions(-)

index 32d21983c6968..094afdf7dea10 100644
@@ -56,7 +56,7 @@ struct unix_sock {
 	struct mutex		iolock, bindlock;
 	struct sock		*peer;
 	struct list_head	link;
-	atomic_long_t		inflight;
+	unsigned long		inflight;
 	spinlock_t		lock;
 	unsigned long		gc_flags;
 #define UNIX_GC_CANDIDATE	0

index 27a88a738793f..628d97c195a7e 100644
@@ -877,11 +877,11 @@ static struct sock *unix_create1(struct net *net, struct socket *sock, int kern,
 	sk->sk_write_space	= unix_write_space;
 	sk->sk_max_ack_backlog	= net->unx.sysctl_max_dgram_qlen;
 	sk->sk_destruct		= unix_sock_destructor;
-	u	  = unix_sk(sk);
+	u = unix_sk(sk);
+	u->inflight = 0;
 	u->path.dentry = NULL;
 	u->path.mnt = NULL;
 	spin_lock_init(&u->lock);
-	atomic_long_set(&u->inflight, 0);
 	INIT_LIST_HEAD(&u->link);
 	mutex_init(&u->iolock); /* single task reading lock */
 	mutex_init(&u->bindlock); /* single task binding lock */

index 9bfffe2a7f020..7b326582d97da 100644
@@ -166,17 +166,18 @@ static void scan_children(struct sock *x, void (*func)(struct unix_sock *),
 
 static void dec_inflight(struct unix_sock *usk)
 {
-	atomic_long_dec(&usk->inflight);
+	usk->inflight--;
 }
 
 static void inc_inflight(struct unix_sock *usk)
 {
-	atomic_long_inc(&usk->inflight);
+	usk->inflight++;
 }
 
 static void inc_inflight_move_tail(struct unix_sock *u)
 {
-	atomic_long_inc(&u->inflight);
+	u->inflight++;
+
 	/* If this still might be part of a cycle, move it to the end
 	 * of the list, so that it's checked even if it was already
 	 * passed over

@@ -237,14 +238,12 @@ void unix_gc(void)
 	 */
 	list_for_each_entry_safe(u, next, &gc_inflight_list, link) {
 		long total_refs;
-		long inflight_refs;
 
 		total_refs = file_count(u->sk.sk_socket->file);
-		inflight_refs = atomic_long_read(&u->inflight);
 
-		BUG_ON(inflight_refs < 1);
-		BUG_ON(total_refs < inflight_refs);
-		if (total_refs == inflight_refs) {
+		BUG_ON(!u->inflight);
+		BUG_ON(total_refs < u->inflight);
+		if (total_refs == u->inflight) {
 			list_move_tail(&u->link, &gc_candidates);
 			__set_bit(UNIX_GC_CANDIDATE, &u->gc_flags);
 			__set_bit(UNIX_GC_MAYBE_CYCLE, &u->gc_flags);

@@ -271,7 +270,7 @@ void unix_gc(void)
 		/* Move cursor to after the current position. */
 		list_move(&cursor, &u->link);
 
-		if (atomic_long_read(&u->inflight) > 0) {
+		if (u->inflight) {
 			list_move_tail(&u->link, &not_cycle_list);
 			__clear_bit(UNIX_GC_MAYBE_CYCLE, &u->gc_flags);
 			scan_children(&u->sk, inc_inflight_move_tail, NULL);

index d1048b4c2baaf..4eff7da9f6f96 100644
@@ -52,12 +52,13 @@ void unix_inflight(struct user_struct *user, struct file *fp)
 	if (s) {
 		struct unix_sock *u = unix_sk(s);
 
-		if (atomic_long_inc_return(&u->inflight) == 1) {
+		if (!u->inflight) {
 			BUG_ON(!list_empty(&u->link));
 			list_add_tail(&u->link, &gc_inflight_list);
 		} else {
 			BUG_ON(list_empty(&u->link));
 		}
+		u->inflight++;
 		/* Paired with READ_ONCE() in wait_for_unix_gc() */
 		WRITE_ONCE(unix_tot_inflight, unix_tot_inflight + 1);
 	}

@@ -74,10 +75,11 @@ void unix_notinflight(struct user_struct *user, struct file *fp)
 	if (s) {
 		struct unix_sock *u = unix_sk(s);
 
-		BUG_ON(!atomic_long_read(&u->inflight));
+		BUG_ON(!u->inflight);
 		BUG_ON(list_empty(&u->link));
 
-		if (atomic_long_dec_and_test(&u->inflight))
+		u->inflight--;
+		if (!u->inflight)
 			list_del_init(&u->link);
 		/* Paired with READ_ONCE() in wait_for_unix_gc() */
 		WRITE_ONCE(unix_tot_inflight, unix_tot_inflight - 1);

2.43.0

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Michal Luczaj <[email protected]>

[ Upstream commit 47d8ac011fe1c9251070e1bd64cb10b48193ec51 ]

Garbage collector does not take into account the risk of embryo getting enqueued during the garbage collection. If such embryo has a peer that carries SCM_RIGHTS, two consecutive passes of scan_children() may see a different set of children. Leading to an incorrectly elevated inflight count, and then a dangling pointer within the gc_inflight_list.

sockets are AF_UNIX/SOCK_STREAM
S is an unconnected socket
L is a listening in-flight socket bound to addr, not in fdtable V's fd will be passed via sendmsg(), gets inflight count bumped

connect(S, addr) sendmsg(S, [V]); close(V) __unix_gc()
---------------- ------------------------- -----------

NS = unix_create1()
skb1 = sock_wmalloc(NS)
L = unix_find_other(addr)
unix_state_lock(L)
unix_peer(S) = NS

			// V count=1 inflight=0

NS = unix_peer(S)
skb2 = sock_alloc()

			skb_queue_tail(NS, skb2[V])

			// V became in-flight
			// V count=2 inflight=1

			close(V)

			// V count=1 inflight=1
			// GC candidate condition met

						for u in gc_inflight_list:
						  if (total_refs == inflight_refs)
						    add u to gc_candidates

						// gc_candidates={L, V}

						for u in gc_candidates:
						  scan_children(u, dec_inflight)

						// embryo (skb1) was not
						// reachable from L yet, so V's
						// inflight remains unchanged
__skb_queue_tail(L, skb1)
unix_state_unlock(L)
						for u in gc_candidates:
						  if (u.inflight)
						    scan_children(u, inc_inflight_move_tail)

						// V count=1 inflight=2 (!)

If there is a GC-candidate listening socket, lock/unlock its state. This makes GC wait until the end of any ongoing connect() to that socket. After flipping the lock, a possibly SCM-laden embryo is already enqueued. And if there is another embryo coming, it can not possibly carry SCM_RIGHTS. At this point, unix_inflight() can not happen because unix_gc_lock is already taken. Inflight graph remains unaffected.

---
 net/unix/garbage.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

index 7b326582d97da..85c6f05c0fa3c 100644
@@ -235,11 +235,22 @@ void unix_gc(void)
 	 * receive queues.  Other, non candidate sockets _can_ be
 	 * added to queue, so we must make sure only to touch
 	 * candidates.
+	 *
+	 * Embryos, though never candidates themselves, affect which
+	 * candidates are reachable by the garbage collector.  Before
+	 * being added to a listener's queue, an embryo may already
+	 * receive data carrying SCM_RIGHTS, potentially making the
+	 * passed socket a candidate that is not yet reachable by the
+	 * collector.  It becomes reachable once the embryo is
+	 * enqueued.  Therefore, we must ensure that no SCM-laden
+	 * embryo appears in a (candidate) listener's queue between
+	 * consecutive scan_children() calls.
 	 */
 	list_for_each_entry_safe(u, next, &gc_inflight_list, link) {
+		struct sock *sk = &u->sk;
 		long total_refs;
 
-		total_refs = file_count(u->sk.sk_socket->file);
+		total_refs = file_count(sk->sk_socket->file);
 
 		BUG_ON(!u->inflight);
 		BUG_ON(total_refs < u->inflight);

@@ -247,6 +258,11 @@ void unix_gc(void)
 			list_move_tail(&u->link, &gc_candidates);
 			__set_bit(UNIX_GC_CANDIDATE, &u->gc_flags);
 			__set_bit(UNIX_GC_MAYBE_CYCLE, &u->gc_flags);
+
+			if (sk->sk_state == TCP_LISTEN) {
+				unix_state_lock(sk);
+				unix_state_unlock(sk);
+			}
 		}
 	}
 

2.43.0

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: David Arinzon <[email protected]>

[ Upstream commit 713a85195aad25d8a26786a37b674e3e5ec09e3c ]

Small unsigned types are promoted to larger signed types in the case of multiplication, the result of which may overflow. In case the result of such a multiplication has its MSB turned on, it will be sign extended with '1's.
This changes the multiplication result.

Code example of the phenomenon:
-------------------------------
u16 x, y;
size_t z1, z2;

x = y = 0xffff;
printk("x=%x y=%x\n",x,y);

z1 = x*y;
z2 = (size_t)x*y;

printk("z1=%lx z2=%lx\n", z1, z2);

Output:
-------
x=ffff y=ffff
z1=fffffffffffe0001 z2=fffe0001

The expected result of ffff*ffff is fffe0001, and without the explicit casting to avoid the unwanted sign extension we got fffffffffffe0001.

This commit adds an explicit casting to avoid the sign extension issue.

---
 drivers/net/ethernet/amazon/ena/ena_com.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 7979b10192425..e37c82eb62326 100644
@@ -362,7 +362,7 @@ static int ena_com_init_io_sq(struct ena_com_dev *ena_dev,
 			ENA_COM_BOUNCE_BUFFER_CNTRL_CNT;
 		io_sq->bounce_buf_ctrl.next_to_use = 0;
 
-		size = io_sq->bounce_buf_ctrl.buffer_size *
+		size = (size_t)io_sq->bounce_buf_ctrl.buffer_size *
 			io_sq->bounce_buf_ctrl.buffers_num;
 
 		dev_node = dev_to_node(ena_dev->dmadev);

2.43.0

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: David Arinzon <[email protected]>

[ Upstream commit f7e417180665234fdb7af2ebe33d89aaa434d16f ]

Missing IO completions check is called every second (HZ jiffies). This commit fixes several issues with this check:

1. Duplicate queues check:
Max of 4 queues are scanned on each check due to monitor budget. Once reaching the budget, this check exits under the assumption that the next check will continue to scan the remainder of the queues, but in practice, next check will first scan the last already scanned queue which is not necessary and may cause the full queue scan to last a couple of seconds longer.
The fix is to start every check with the next queue to scan. For example, on 8 IO queues:
Bug: [0,1,2,3], [3,4,5,6], [6,7]
Fix: [0,1,2,3], [4,5,6,7]

2. Unbalanced queues check:
In case the number of active IO queues is not a multiple of budget, there will be checks which don't utilize the full budget because the full scan exits when reaching the last queue id. The fix is to run every TX completion check with exact queue budget regardless of the queue id.
For example, on 7 IO queues:
Bug: [0,1,2,3], [4,5,6], [0,1,2,3]
Fix: [0,1,2,3], [4,5,6,0], [1,2,3,4]
The budget may be lowered in case the number of IO queues is less than the budget (4) to make sure there are no duplicate queues on the same check.
For example, on 3 IO queues:
Bug: [0,1,2,0], [1,2,0,1]
Fix: [0,1,2], [0,1,2]

---
 drivers/net/ethernet/amazon/ena/ena_netdev.c | 21 +++++++++++---------
 1 file changed, 12 insertions(+), 9 deletions(-)

index 43c099141e211..44b8df731c889 100644
@@ -3815,10 +3815,11 @@ static void check_for_missing_completions(struct ena_adapter *adapter)
 {
 	struct ena_ring *tx_ring;
 	struct ena_ring *rx_ring;
-	int i, budget, rc;
+	int qid, budget, rc;
 	int io_queue_count;
 
 	io_queue_count = adapter->xdp_num_queues + adapter->num_io_queues;
+
 	/* Make sure the driver doesn't turn the device in other process */
 	smp_rmb();
 

@@ -3831,27 +3832,29 @@ static void check_for_missing_completions(struct ena_adapter *adapter)
 	if (adapter->missing_tx_completion_to == ENA_HW_HINTS_NO_TIMEOUT)
 		return;
 
-	budget = ENA_MONITORED_TX_QUEUES;
+	budget = min_t(u32, io_queue_count, ENA_MONITORED_TX_QUEUES);
 
-	for (i = adapter->last_monitored_tx_qid; i < io_queue_count; i++) {
-		tx_ring = &adapter->tx_ring[i];
-		rx_ring = &adapter->rx_ring[i];
+	qid = adapter->last_monitored_tx_qid;
+
+	while (budget) {
+		qid = (qid + 1) % io_queue_count;
+
+		tx_ring = &adapter->tx_ring[qid];
+		rx_ring = &adapter->rx_ring[qid];
 
 		rc = check_missing_comp_in_tx_queue(adapter, tx_ring);
 		if (unlikely(rc))
 			return;
 
-		rc =  !ENA_IS_XDP_INDEX(adapter, i) ?
+		rc =  !ENA_IS_XDP_INDEX(adapter, qid) ?
 			check_for_rx_interrupt_queue(adapter, rx_ring) : 0;
 		if (unlikely(rc))
 			return;
 
 		budget--;
-		if (!budget)
-			break;
 	}
 
-	adapter->last_monitored_tx_qid = i % io_queue_count;
+	adapter->last_monitored_tx_qid = qid;
 }
 
 /* trigger napi schedule after 2 consecutive detections */

2.43.0

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: David Arinzon <[email protected]>

[ Upstream commit bf02d9fe00632d22fa91d34749c7aacf397b6cde ]

ENA has two types of TX queues:
- queues which only process TX packets arriving from the network stack
- queues which only process TX packets forwarded to it by XDP_REDIRECT or XDP_TX instructions

The ena_free_tx_bufs() cycles through all descriptors in a TX queue and unmaps + frees every descriptor that hasn't been acknowledged yet by the device (uncompleted TX transactions).
The function assumes that the processed TX queue is necessarily from the first category listed above and ends up using napi_consume_skb() for descriptors belonging to an XDP specific queue.

This patch solves a bug in which, in case of a VF reset, the descriptors aren't freed correctly, leading to crashes.

---
 drivers/net/ethernet/amazon/ena/ena_netdev.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

index 44b8df731c889..3ea449be7bdc3 100644
@@ -1205,8 +1205,11 @@ static void ena_unmap_tx_buff(struct ena_ring *tx_ring,
 static void ena_free_tx_bufs(struct ena_ring *tx_ring)
 {
 	bool print_once = true;
+	bool is_xdp_ring;
 	u32 i;
 
+	is_xdp_ring = ENA_IS_XDP_INDEX(tx_ring->adapter, tx_ring->qid);
+
 	for (i = 0; i < tx_ring->ring_size; i++) {
 		struct ena_tx_buffer *tx_info = &tx_ring->tx_buffer_info[i];
 

@@ -1226,10 +1229,15 @@ static void ena_free_tx_bufs(struct ena_ring *tx_ring)
 
 		ena_unmap_tx_buff(tx_ring, tx_info);
 
-		dev_kfree_skb_any(tx_info->skb);
+		if (is_xdp_ring)
+			xdp_return_frame(tx_info->xdpf);
+		else
+			dev_kfree_skb_any(tx_info->skb);
 	}
-	netdev_tx_reset_queue(netdev_get_tx_queue(tx_ring->netdev,
-						  tx_ring->qid));
+
+	if (!is_xdp_ring)
+		netdev_tx_reset_queue(netdev_get_tx_queue(tx_ring->netdev,
+							  tx_ring->qid));
 }
 
 static void ena_free_all_tx_bufs(struct ena_adapter *adapter)

2.43.0

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <[email protected]>

[ Upstream commit 5281ec83454d70d98b71f1836fb16512566c01cd ]

When CONFIG_PERF_EVENTS, a 'make W=1' build produces a warning about the unused ftrace_event_id_fops variable:

kernel/trace/trace_events.c:2155:37: error: 'ftrace_event_id_fops' defined but not used [-Werror=unused-const-variable=]
2155 | static const struct file_operations ftrace_event_id_fops = {

Hide this in the same #ifdef as the reference to it.

---
 kernel/trace/trace_events.c | 4 ++++
 1 file changed, 4 insertions(+)

index 0a7348b90ba50..1f4f3096b9ac4 100644
@@ -1645,6 +1645,7 @@ static int trace_format_open(struct inode *inode, struct file *file)
 	return 0;
 }
 
+#ifdef CONFIG_PERF_EVENTS
 static ssize_t
 event_id_read(struct file *filp, char __user *ubuf, size_t cnt, loff_t *ppos)
 {

@@ -1659,6 +1660,7 @@ event_id_read(struct file *filp, char __user *ubuf, size_t cnt, loff_t *ppos)
 
 	return simple_read_from_buffer(ubuf, cnt, ppos, buf, len);
 }
+#endif
 
 static ssize_t
 event_filter_read(struct file *filp, char __user *ubuf, size_t cnt,

@@ -2104,10 +2106,12 @@ static const struct file_operations ftrace_event_format_fops = {
 	.release = seq_release,
 };
 
+#ifdef CONFIG_PERF_EVENTS
 static const struct file_operations ftrace_event_id_fops = {
 	.read = event_id_read,
 	.llseek = default_llseek,
 };
+#endif
 
 static const struct file_operations ftrace_event_filter_fops = {
 	.open = tracing_open_file_tr,

2.43.0

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jacob Pan <[email protected]>

[ Upstream commit a34f3e20ddff02c4f12df2c0635367394e64c63d ]

The page request queue is per IOMMU, its allocation should be made NUMA-aware for performance reasons.

---
 drivers/iommu/intel/svm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 3a9468b1d2c3c..a96c9a15c9fee 100644
@@ -88,7 +88,7 @@ int intel_svm_enable_prq(struct intel_iommu *iommu)
 	struct page *pages;
 	int irq, ret;
 
-	pages = alloc_pages(GFP_KERNEL | __GFP_ZERO, PRQ_ORDER);
+	pages = alloc_pages_node(iommu->node, GFP_KERNEL | __GFP_ZERO, PRQ_ORDER);
 	if (!pages) {
 		pr_warn("IOMMU: %s: Failed to allocate page request queue\n",
 			iommu->name);

2.43.0

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Boris Burkov <[email protected]>

commit 141fb8cd206ace23c02cd2791c6da52c1d77d42a upstream.

We use add_root_meta_rsv and sub_root_meta_rsv to track prealloc and pertrans reservations for subvolumes when quotas are enabled. The convert function does not properly increment pertrans after decrementing prealloc, so the count is not accurate.

Note: we check that the fs is not read-only to mirror the logic in qgroup_convert_meta, which checks that before adding to the pertrans rsv.

---
 fs/btrfs/qgroup.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -4080,6 +4080,8 @@ void btrfs_qgroup_convert_reserved_meta(
 				      BTRFS_QGROUP_RSV_META_PREALLOC);
 	trace_qgroup_meta_convert(root, num_bytes);
 	qgroup_convert_meta(fs_info, root->root_key.objectid, num_bytes);
+	if (!sb_rdonly(fs_info->sb))
+		add_root_meta_rsv(root, num_bytes, BTRFS_QGROUP_RSV_META_PERTRANS);
 }
 
 /*

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ville Syrjälä <[email protected]>

commit 3eadd887dbac1df8f25f701e5d404d1b90fd0fea upstream.

The modes[] array contains pointers to modes on the connectors' mode lists, which are protected by dev->mode_config.mutex. Thus we need to extend modes[] the same protection or by the time we use it the elements may already be pointing to freed/reused memory.

---
 drivers/gpu/drm/drm_client_modeset.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

@@ -775,6 +775,7 @@ int drm_client_modeset_probe(struct drm_
 	unsigned int total_modes_count = 0;
 	struct drm_client_offset *offsets;
 	unsigned int connector_count = 0;
+	/* points to modes protected by mode_config.mutex */
 	struct drm_display_mode **modes;
 	struct drm_crtc **crtcs;
 	int i, ret = 0;

@@ -843,7 +844,6 @@ int drm_client_modeset_probe(struct drm_
 		drm_client_pick_crtcs(client, connectors, connector_count,
 				      crtcs, modes, 0, width, height);
 	}
-	mutex_unlock(&dev->mode_config.mutex);
 
 	drm_client_modeset_release(client);
 

@@ -873,6 +873,7 @@ int drm_client_modeset_probe(struct drm_
 			modeset->y = offset->y;
 		}
 	}
+	mutex_unlock(&dev->mode_config.mutex);
 
 	mutex_unlock(&client->modeset_mutex);
 out:

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Gavin Shan <[email protected]>

commit 22e1992cf7b034db5325660e98c41ca5afa5f519 upstream.

A smp_rmb() has been missed in vhost_vq_avail_empty(), spotted by Will. Otherwise, it's not ensured the available ring entries pushed by guest can be observed by vhost in time, leading to stale available ring entries fetched by vhost in vhost_get_vq_desc(), as reported by Yihuang Yu on NVidia's grace-hopper (ARM64) platform.

  /home/gavin/sandbox/qemu.main/build/qemu-system-aarch64      \
  -accel kvm -machine virt,gic-version=host -cpu host          \
  -smp maxcpus=1,cpus=1,sockets=1,clusters=1,cores=1,threads=1 \
  -m 4096M,slots=16,maxmem=64G                                 \
  -object memory-backend-ram,id=mem0,size=4096M                \
   :                                                           \
  -netdev tap,id=vnet0,vhost=true                              \
  -device virtio-net-pci,bus=pcie.8,netdev=vnet0,mac=52:54:00:f1:26:b0
   :
  guest# netperf -H 10.26.1.81 -l 60 -C -c -t UDP_STREAM
  virtio_net virtio0: output.0:id 100 is not a head!

Add the missed smp_rmb() in vhost_vq_avail_empty(). When tx_can_batch() returns true, it means there's still pending tx buffers. Since it might read indices, so it still can bypass the smp_rmb() in vhost_get_vq_desc(). Note that it should be safe until vq->avail_idx is changed by commit 275bf960ac697 ("vhost: better detection of available buffers").

Message-Id: <[email protected]>

---
 drivers/vhost/vhost.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

@@ -2518,9 +2518,19 @@ bool vhost_vq_avail_empty(struct vhost_d
 	r = vhost_get_avail_idx(vq, &avail_idx);
 	if (unlikely(r))
 		return false;
+
 	vq->avail_idx = vhost16_to_cpu(vq, avail_idx);
+	if (vq->avail_idx != vq->last_avail_idx) {
+		/* Since we have updated avail_idx, the following
+		 * call to vhost_get_vq_desc() will read available
+		 * ring entries. Make sure that read happens after
+		 * the avail_idx read.
+		 */
+		smp_rmb();
+		return false;
+	}
 
-	return vq->avail_idx == vq->last_avail_idx;
+	return true;
 }
 EXPORT_SYMBOL_GPL(vhost_vq_avail_empty);
 

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Namhyung Kim <[email protected]>

commit dec8ced871e17eea46f097542dd074d022be4bd1 upstream.

On x86 each struct cpu_hw_events maintains a table for counter assignment but it missed to update one for the deleted event in x86_pmu_del(). This can make perf_clear_dirty_counters() reset used counter if it's called before event scheduling or enabling. Then it would return out of range data which doesn't make sense.

The following code can reproduce the problem.

  $ cat repro.c
  #include <pthread.h>
  #include <stdio.h>
  #include <stdlib.h>
  #include <unistd.h>
  #include <linux/perf_event.h>
  #include <sys/ioctl.h>
  #include <sys/mman.h>
  #include <sys/syscall.h>

  struct perf_event_attr attr = {
  	.type = PERF_TYPE_HARDWARE,
  	.config = PERF_COUNT_HW_CPU_CYCLES,
  	.disabled = 1,
  };

  void *worker(void *arg)
  {
  	int cpu = (long)arg;
  	int fd1 = syscall(SYS_perf_event_open, &attr, -1, cpu, -1, 0);
  	int fd2 = syscall(SYS_perf_event_open, &attr, -1, cpu, -1, 0);
  	void *p;

  	do {
  		ioctl(fd1, PERF_EVENT_IOC_ENABLE, 0);
  		p = mmap(NULL, 4096, PROT_READ, MAP_SHARED, fd1, 0);
  		ioctl(fd2, PERF_EVENT_IOC_ENABLE, 0);

  		ioctl(fd2, PERF_EVENT_IOC_DISABLE, 0);
  		munmap(p, 4096);
  		ioctl(fd1, PERF_EVENT_IOC_DISABLE, 0);
  	} while (1);

  	return NULL;
  }

  int main(void)
  {
  	int i;
  	int n = sysconf(_SC_NPROCESSORS_ONLN);
  	pthread_t *th = calloc(n, sizeof(*th));

  	for (i = 0; i < n; i++)
  		pthread_create(&th[i], NULL, worker, (void *)(long)i);
  	for (i = 0; i < n; i++)
  		pthread_join(th[i], NULL);

  	free(th);
  	return 0;
  }

And you can see the out of range data using perf stat like this. Probably it'd be easier to see on a large machine.

  $ gcc -o repro repro.c -pthread
  $ ./repro &
  $ sudo perf stat -A -I 1000 2>&1 | awk '{ if (length($3) > 15) print }'
       1.001028462 CPU6   196,719,295,683,763      cycles                           # 194290.996 GHz                       (71.54%)
       1.001028462 CPU3   396,077,485,787,730      branch-misses                    # 15804359784.80% of all branches      (71.07%)
       1.001028462 CPU17  197,608,350,727,877      branch-misses                    # 14594186554.56% of all branches      (71.22%)
       2.020064073 CPU4   198,372,472,612,140      cycles                           # 194681.113 GHz                       (70.95%)
       2.020064073 CPU6   199,419,277,896,696      cycles                           # 195720.007 GHz                       (70.57%)
       2.020064073 CPU20  198,147,174,025,639      cycles                           # 194474.654 GHz                       (71.03%)
       2.020064073 CPU20  198,421,240,580,145      stalled-cycles-frontend          #  100.14% frontend cycles idle        (70.93%)
       3.037443155 CPU4   197,382,689,923,416      cycles                           # 194043.065 GHz                       (71.30%)
       3.037443155 CPU20  196,324,797,879,414      cycles                           # 193003.773 GHz                       (71.69%)
       3.037443155 CPU5   197,679,956,608,205      stalled-cycles-backend           # 1315606428.66% backend cycles idle   (71.19%)
       3.037443155 CPU5   198,571,860,474,851      instructions                     # 13215422.58  insn per cycle

It should move the contents in the cpuc->assign as well.

---
 arch/x86/events/core.c |    1 +
 1 file changed, 1 insertion(+)

@@ -1649,6 +1649,7 @@ static void x86_pmu_del(struct perf_even
 	while (++i < cpuc->n_events) {
 		cpuc->event_list[i-1] = cpuc->event_list[i];
 		cpuc->event_constraint[i-1] = cpuc->event_constraint[i];
+		cpuc->assign[i-1] = cpuc->assign[i];
 	}
 	cpuc->event_constraint[i-1] = NULL;
 	--cpuc->n_events;

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sean Christopherson <[email protected]>

commit f337a6a21e2fd67eadea471e93d05dd37baaa9be upstream.

Initialize cpu_mitigations to CPU_MITIGATIONS_OFF if the kernel is built with CONFIG_SPECULATION_MITIGATIONS=n, as the help text quite clearly states that disabling SPECULATION_MITIGATIONS is supposed to turn off all mitigations by default.

  │ If you say N, all mitigations will be disabled. You really
  │ should know what you are doing to say so.

As is, the kernel still defaults to CPU_MITIGATIONS_AUTO, which results in some mitigations being enabled in spite of SPECULATION_MITIGATIONS=n.

---
 kernel/cpu.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

@@ -2722,7 +2722,8 @@ enum cpu_mitigations {
 };
 
 static enum cpu_mitigations cpu_mitigations __ro_after_init =
-	CPU_MITIGATIONS_AUTO;
+	IS_ENABLED(CONFIG_SPECULATION_MITIGATIONS) ? CPU_MITIGATIONS_AUTO :
+						     CPU_MITIGATIONS_OFF;
 
 static int __init mitigations_parse_cmdline(char *arg)
 {

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: John Stultz <[email protected]>

commit ed366de8ec89d4f960d66c85fc37d9de22f7bf6d upstream.

Building with clang results in the following warning:

posix_timers.c:69:6: warning: absolute value function 'abs' given an
argument of type 'long long' but has parameter of type 'int' which may cause truncation of value [-Wabsolute-value]
if (abs(diff - DELAY * USECS_PER_SEC) > USECS_PER_SEC / 2) {
^
So switch to using llabs() instead.

---
 tools/testing/selftests/timers/posix_timers.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -66,7 +66,7 @@ static int check_diff(struct timeval sta
 	diff = end.tv_usec - start.tv_usec;
 	diff += (end.tv_sec - start.tv_sec) * USECS_PER_SEC;
 
-	if (abs(diff - DELAY * USECS_PER_SEC) > USECS_PER_SEC / 2) {
+	if (llabs(diff - DELAY * USECS_PER_SEC) > USECS_PER_SEC / 2) {
 		printf("Diff too high: %lld..", diff);
 		return -1;
 	}

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Adam Dunlap <[email protected]>

commit 5ce344beaca688f4cdea07045e0b8f03dc537e74 upstream.

When done from a virtual machine, instructions that touch APIC memory must be emulated. By convention, MMIO accesses are typically performed via io.h helpers such as readl() or writeq() to simplify instruction emulation/decoding (ex: in KVM hosts and SEV guests) [0].

Currently, native_apic_mem_read() does not follow this convention, allowing the compiler to emit instructions other than the MOV instruction generated by readl(). In particular, when the kernel is compiled with clang and run as a SEV-ES or SEV-SNP guest, the compiler would emit a TESTL instruction which is not supported by the SEV-ES emulator, causing a boot failure in that environment. It is likely the same problem would happen in a TDX guest as that uses the same instruction emulator as SEV-ES.

To make sure all emulators can emulate APIC memory reads via MOV, use the readl() function in native_apic_mem_read(). It is expected that any emulator would support MOV in any addressing mode as it is the most generic and is what is usually emitted currently.

The TESTL instruction is emitted when native_apic_mem_read() is inlined into apic_mem_wait_icr_idle(). The emulator comes from insn_decode_mmio() in arch/x86/lib/insn-eval.c. It's not worth it to extend insn_decode_mmio() to support more instructions since, in theory, the compiler could choose to output nearly any instruction for such reads which would bloat the emulator beyond reason.

[0] https://lore.kernel.org/all/[email protected]/

[ bp: Massage commit message, fix typos. ]

---
 arch/x86/include/asm/apic.h |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

@@ -12,6 +12,7 @@
 #include <asm/mpspec.h>
 #include <asm/msr.h>
 #include <asm/hardirq.h>
+#include <asm/io.h>
 
 #define ARCH_APICTIMER_STOPS_ON_C3	1
 

@@ -111,7 +112,7 @@ static inline void native_apic_mem_write
 
 static inline u32 native_apic_mem_read(u32 reg)
 {
-	return *((volatile u32 *)(APIC_BASE + reg));
+	return readl((void __iomem *)(APIC_BASE + reg));
 }
 
 extern void native_apic_wait_icr_idle(void);

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <[email protected]>

commit c1d11fc2c8320871b40730991071dd0a0b405bc8 upstream.

When building with 'make W=1' but CONFIG_TRACE_IRQFLAGS=n, the unused argument to lockdep_hrtimer_exit() causes a warning:

kernel/time/hrtimer.c:1655:14: error: variable 'expires_in_hardirq' set but not used [-Werror=unused-but-set-variable]

This is intentional behavior, so add a cast to void to shut up the warning.

---
 include/linux/irqflags.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -133,7 +133,7 @@ do {						\
 # define lockdep_softirq_enter()		do { } while (0)
 # define lockdep_softirq_exit()			do { } while (0)
 # define lockdep_hrtimer_enter(__hrtimer)	false
-# define lockdep_hrtimer_exit(__context)	do { } while (0)
+# define lockdep_hrtimer_exit(__context)	do { (void)(__context); } while (0)
 # define lockdep_posixtimer_enter()		do { } while (0)
 # define lockdep_posixtimer_exit()		do { } while (0)
 # define lockdep_irq_work_enter(__work)		do { } while (0)

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Daniel Sneddon <[email protected]>

commit 04f4230e2f86a4e961ea5466eda3db8c1762004d upstream.

The definition of spectre_bhi_state() incorrectly returns a const char
* const. This causes the a compiler warning when building with W=1:

warning: type qualifiers ignored on function return type [-Wignored-qualifiers] 2812 | static const char * const spectre_bhi_state(void)

Remove the const qualifier from the pointer.

---
 arch/x86/kernel/cpu/bugs.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -2788,7 +2788,7 @@ static char *pbrsb_eibrs_state(void)
 	}
 }
 
-static const char * const spectre_bhi_state(void)
+static const char *spectre_bhi_state(void)
 {
 	if (!boot_cpu_has_bug(X86_BUG_BHI))
 		return "; BHI: Not affected";

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Josh Poimboeuf <[email protected]>

commit dfe648903f42296866d79f10d03f8c85c9dfba30 upstream.

Fix up some inaccuracies in the BHI documentation.

---
 Documentation/admin-guide/hw-vuln/spectre.rst   |   15 ++++++++-------
 Documentation/admin-guide/kernel-parameters.txt |   12 +++++++-----
 2 files changed, 15 insertions(+), 12 deletions(-)

@@ -439,11 +439,11 @@ The possible values in this file are:
    - System is protected by retpoline
  * - BHI: BHI_DIS_S
    - System is protected by BHI_DIS_S
- * - BHI: SW loop; KVM SW loop
+ * - BHI: SW loop, KVM SW loop
    - System is protected by software clearing sequence
  * - BHI: Syscall hardening
    - Syscalls are hardened against BHI
- * - BHI: Syscall hardening; KVM: SW loop
+ * - BHI: Syscall hardening, KVM: SW loop
    - System is protected from userspace attacks by syscall hardening; KVM is protected by software clearing sequence
 
 Full mitigation might require a microcode update from the CPU

@@ -716,13 +716,14 @@ For user space mitigation:
 		of the HW BHI control and the SW BHB clearing sequence.
 
 		on
-			unconditionally enable.
+			(default) Enable the HW or SW mitigation as
+			needed.
 		off
-			unconditionally disable.
+			Disable the mitigation.
 		auto
-			enable if hardware mitigation
-			control(BHI_DIS_S) is available, otherwise
-			enable alternate mitigation in KVM.
+			Enable the HW mitigation if needed, but
+			*don't* enable the SW mitigation except for KVM.
+			The system may be vulnerable.
 
 For spectre_v2_user see Documentation/admin-guide/kernel-parameters.txt
 

@@ -3093,6 +3093,7 @@
 					       reg_file_data_sampling=off [X86]
 					       retbleed=off [X86]
 					       spec_store_bypass_disable=off [X86,PPC]
+					       spectre_bhi=off [X86]
 					       spectre_v2_user=off [X86]
 					       ssbd=force-off [ARM64]
 					       tsx_async_abort=off [X86]

@@ -5410,11 +5411,12 @@
 			deployment of the HW BHI control and the SW BHB
 			clearing sequence.
 
-			on   - unconditionally enable.
-			off  - unconditionally disable.
-			auto - (default) enable hardware mitigation
-			       (BHI_DIS_S) if available, otherwise enable
-			       alternate mitigation in KVM.
+			on   - (default) Enable the HW or SW mitigation
+			       as needed.
+			off  - Disable the mitigation.
+			auto - Enable the HW mitigation if needed, but
+			       *don't* enable the SW mitigation except
+			       for KVM.  The system may be vulnerable.
 
 	spectre_v2=	[X86] Control mitigation of Spectre variant 2
 			(indirect branch speculation) vulnerability.

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Josh Poimboeuf <[email protected]>

commit cb2db5bb04d7f778fbc1a1ea2507aab436f1bff3 upstream.

There's no need to keep reading MSR_IA32_ARCH_CAPABILITIES over and over. It's even read in the BHI sysfs function which is a big no-no. Just read it once and cache it.

---
 arch/x86/kernel/cpu/bugs.c |   22 +++++++---------------
 1 file changed, 7 insertions(+), 15 deletions(-)

@@ -60,6 +60,8 @@ EXPORT_SYMBOL_GPL(x86_spec_ctrl_current)
 u64 x86_pred_cmd __ro_after_init = PRED_CMD_IBPB;
 EXPORT_SYMBOL_GPL(x86_pred_cmd);
 
+static u64 __ro_after_init ia32_cap;
+
 static DEFINE_MUTEX(spec_ctrl_mutex);
 
 void (*x86_return_thunk)(void) __ro_after_init = &__x86_return_thunk;

@@ -143,6 +145,8 @@ void __init cpu_select_mitigations(void)
 		x86_spec_ctrl_base &= ~SPEC_CTRL_MITIGATIONS_MASK;
 	}
 
+	ia32_cap = x86_read_arch_cap_msr();
+
 	/* Select the proper CPU mitigations before patching alternatives: */
 	spectre_v1_select_mitigation();
 	spectre_v2_select_mitigation();

@@ -307,8 +311,6 @@ static const char * const taa_strings[]
 
 static void __init taa_select_mitigation(void)
 {
-	u64 ia32_cap;
-
 	if (!boot_cpu_has_bug(X86_BUG_TAA)) {
 		taa_mitigation = TAA_MITIGATION_OFF;
 		return;

@@ -347,7 +349,6 @@ static void __init taa_select_mitigation
 	 * On MDS_NO=1 CPUs if ARCH_CAP_TSX_CTRL_MSR is not set, microcode
 	 * update is required.
 	 */
-	ia32_cap = x86_read_arch_cap_msr();
 	if ( (ia32_cap & ARCH_CAP_MDS_NO) &&
 	    !(ia32_cap & ARCH_CAP_TSX_CTRL_MSR))
 		taa_mitigation = TAA_MITIGATION_UCODE_NEEDED;

@@ -407,8 +408,6 @@ static const char * const mmio_strings[]
 
 static void __init mmio_select_mitigation(void)
 {
-	u64 ia32_cap;
-
 	if (!boot_cpu_has_bug(X86_BUG_MMIO_STALE_DATA) ||
 	     boot_cpu_has_bug(X86_BUG_MMIO_UNKNOWN) ||
 	     cpu_mitigations_off()) {

@@ -419,8 +418,6 @@ static void __init mmio_select_mitigatio
 	if (mmio_mitigation == MMIO_MITIGATION_OFF)
 		return;
 
-	ia32_cap = x86_read_arch_cap_msr();
-
 	/*
 	 * Enable CPU buffer clear mitigation for host and VMM, if also affected
 	 * by MDS or TAA. Otherwise, enable mitigation for VMM only.

@@ -514,7 +511,7 @@ static void __init rfds_select_mitigatio
 	if (rfds_mitigation == RFDS_MITIGATION_OFF)
 		return;
 
-	if (x86_read_arch_cap_msr() & ARCH_CAP_RFDS_CLEAR)
+	if (ia32_cap & ARCH_CAP_RFDS_CLEAR)
 		setup_force_cpu_cap(X86_FEATURE_CLEAR_CPU_BUF);
 	else
 		rfds_mitigation = RFDS_MITIGATION_UCODE_NEEDED;

@@ -658,8 +655,6 @@ void update_srbds_msr(void)
 
 static void __init srbds_select_mitigation(void)
 {
-	u64 ia32_cap;
-
 	if (!boot_cpu_has_bug(X86_BUG_SRBDS))
 		return;
 

@@ -668,7 +663,6 @@ static void __init srbds_select_mitigati
 	 * are only exposed to SRBDS when TSX is enabled or when CPU is affected
 	 * by Processor MMIO Stale Data vulnerability.
 	 */
-	ia32_cap = x86_read_arch_cap_msr();
 	if ((ia32_cap & ARCH_CAP_MDS_NO) && !boot_cpu_has(X86_FEATURE_RTM) &&
 	    !boot_cpu_has_bug(X86_BUG_MMIO_STALE_DATA))
 		srbds_mitigation = SRBDS_MITIGATION_TSX_OFF;

@@ -812,7 +806,7 @@ static void __init gds_select_mitigation
 	/* Will verify below that mitigation _can_ be disabled */
 
 	/* No microcode */
-	if (!(x86_read_arch_cap_msr() & ARCH_CAP_GDS_CTRL)) {
+	if (!(ia32_cap & ARCH_CAP_GDS_CTRL)) {
 		if (gds_mitigation == GDS_MITIGATION_FORCE) {
 			/*
 			 * This only needs to be done on the boot CPU so do it

@@ -1884,8 +1878,6 @@ static void update_indir_branch_cond(voi
 /* Update the static key controlling the MDS CPU buffer clear in idle */
 static void update_mds_branch_idle(void)
 {
-	u64 ia32_cap = x86_read_arch_cap_msr();
-
 	/*
 	 * Enable the idle clearing if SMT is active on CPUs which are
 	 * affected only by MSBDS and not any other MDS variant.

@@ -2797,7 +2789,7 @@ static const char *spectre_bhi_state(voi
 	else if  (boot_cpu_has(X86_FEATURE_CLEAR_BHB_LOOP))
 		return "; BHI: SW loop, KVM: SW loop";
 	else if (boot_cpu_has(X86_FEATURE_RETPOLINE) &&
-		 !(x86_read_arch_cap_msr() & ARCH_CAP_RRSBA))
+		 !(ia32_cap & ARCH_CAP_RRSBA))
 		return "; BHI: Retpoline";
 	else if  (boot_cpu_has(X86_FEATURE_CLEAR_BHB_LOOP_ON_VMEXIT))
 		return "; BHI: Syscall hardening, KVM: SW loop";

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ingo Molnar <[email protected]>

commit d0485730d2189ffe5d986d4e9e191f1e4d5ffd24 upstream.

So we are using the 'ia32_cap' value in a number of places, which got its name from MSR_IA32_ARCH_CAPABILITIES MSR register.

But there's very little 'IA32' about it - this isn't 32-bit only code, nor does it originate from there, it's just a historic quirk that many Intel MSR names are prefixed with IA32_.

This is already clear from the helper method around the MSR:
x86_read_arch_cap_msr(), which doesn't have the IA32 prefix.

So rename 'ia32_cap' to 'x86_arch_cap_msr' to be consistent with its role and with the naming of the helper function.

---
 arch/x86/kernel/cpu/bugs.c   |   30 +++++++++++++-------------
 arch/x86/kernel/cpu/common.c |   48 +++++++++++++++++++++----------------------
 2 files changed, 39 insertions(+), 39 deletions(-)

@@ -60,7 +60,7 @@ EXPORT_SYMBOL_GPL(x86_spec_ctrl_current)
 u64 x86_pred_cmd __ro_after_init = PRED_CMD_IBPB;
 EXPORT_SYMBOL_GPL(x86_pred_cmd);
 
-static u64 __ro_after_init ia32_cap;
+static u64 __ro_after_init x86_arch_cap_msr;
 
 static DEFINE_MUTEX(spec_ctrl_mutex);
 

@@ -145,7 +145,7 @@ void __init cpu_select_mitigations(void)
 		x86_spec_ctrl_base &= ~SPEC_CTRL_MITIGATIONS_MASK;
 	}
 
-	ia32_cap = x86_read_arch_cap_msr();
+	x86_arch_cap_msr = x86_read_arch_cap_msr();
 
 	/* Select the proper CPU mitigations before patching alternatives: */
 	spectre_v1_select_mitigation();

@@ -349,8 +349,8 @@ static void __init taa_select_mitigation
 	 * On MDS_NO=1 CPUs if ARCH_CAP_TSX_CTRL_MSR is not set, microcode
 	 * update is required.
 	 */
-	if ( (ia32_cap & ARCH_CAP_MDS_NO) &&
-	    !(ia32_cap & ARCH_CAP_TSX_CTRL_MSR))
+	if ( (x86_arch_cap_msr & ARCH_CAP_MDS_NO) &&
+	    !(x86_arch_cap_msr & ARCH_CAP_TSX_CTRL_MSR))
 		taa_mitigation = TAA_MITIGATION_UCODE_NEEDED;
 
 	/*

@@ -440,7 +440,7 @@ static void __init mmio_select_mitigatio
 	 * be propagated to uncore buffers, clearing the Fill buffers on idle
 	 * is required irrespective of SMT state.
 	 */
-	if (!(ia32_cap & ARCH_CAP_FBSDP_NO))
+	if (!(x86_arch_cap_msr & ARCH_CAP_FBSDP_NO))
 		static_branch_enable(&mds_idle_clear);
 
 	/*

@@ -450,10 +450,10 @@ static void __init mmio_select_mitigatio
 	 * FB_CLEAR or by the presence of both MD_CLEAR and L1D_FLUSH on MDS
 	 * affected systems.
 	 */
-	if ((ia32_cap & ARCH_CAP_FB_CLEAR) ||
+	if ((x86_arch_cap_msr & ARCH_CAP_FB_CLEAR) ||
 	    (boot_cpu_has(X86_FEATURE_MD_CLEAR) &&
 	     boot_cpu_has(X86_FEATURE_FLUSH_L1D) &&
-	     !(ia32_cap & ARCH_CAP_MDS_NO)))
+	     !(x86_arch_cap_msr & ARCH_CAP_MDS_NO)))
 		mmio_mitigation = MMIO_MITIGATION_VERW;
 	else
 		mmio_mitigation = MMIO_MITIGATION_UCODE_NEEDED;

@@ -511,7 +511,7 @@ static void __init rfds_select_mitigatio
 	if (rfds_mitigation == RFDS_MITIGATION_OFF)
 		return;
 
-	if (ia32_cap & ARCH_CAP_RFDS_CLEAR)
+	if (x86_arch_cap_msr & ARCH_CAP_RFDS_CLEAR)
 		setup_force_cpu_cap(X86_FEATURE_CLEAR_CPU_BUF);
 	else
 		rfds_mitigation = RFDS_MITIGATION_UCODE_NEEDED;

@@ -663,7 +663,7 @@ static void __init srbds_select_mitigati
 	 * are only exposed to SRBDS when TSX is enabled or when CPU is affected
 	 * by Processor MMIO Stale Data vulnerability.
 	 */
-	if ((ia32_cap & ARCH_CAP_MDS_NO) && !boot_cpu_has(X86_FEATURE_RTM) &&
+	if ((x86_arch_cap_msr & ARCH_CAP_MDS_NO) && !boot_cpu_has(X86_FEATURE_RTM) &&
 	    !boot_cpu_has_bug(X86_BUG_MMIO_STALE_DATA))
 		srbds_mitigation = SRBDS_MITIGATION_TSX_OFF;
 	else if (boot_cpu_has(X86_FEATURE_HYPERVISOR))

@@ -806,7 +806,7 @@ static void __init gds_select_mitigation
 	/* Will verify below that mitigation _can_ be disabled */
 
 	/* No microcode */
-	if (!(ia32_cap & ARCH_CAP_GDS_CTRL)) {
+	if (!(x86_arch_cap_msr & ARCH_CAP_GDS_CTRL)) {
 		if (gds_mitigation == GDS_MITIGATION_FORCE) {
 			/*
 			 * This only needs to be done on the boot CPU so do it

@@ -1518,14 +1518,14 @@ static enum spectre_v2_mitigation __init
 /* Disable in-kernel use of non-RSB RET predictors */
 static void __init spec_ctrl_disable_kernel_rrsba(void)
 {
-	u64 ia32_cap;
+	u64 x86_arch_cap_msr;
 
 	if (!boot_cpu_has(X86_FEATURE_RRSBA_CTRL))
 		return;
 
-	ia32_cap = x86_read_arch_cap_msr();
+	x86_arch_cap_msr = x86_read_arch_cap_msr();
 
-	if (ia32_cap & ARCH_CAP_RRSBA) {
+	if (x86_arch_cap_msr & ARCH_CAP_RRSBA) {
 		x86_spec_ctrl_base |= SPEC_CTRL_RRSBA_DIS_S;
 		update_spec_ctrl(x86_spec_ctrl_base);
 	}

@@ -1892,7 +1892,7 @@ static void update_mds_branch_idle(void)
 	if (sched_smt_active()) {
 		static_branch_enable(&mds_idle_clear);
 	} else if (mmio_mitigation == MMIO_MITIGATION_OFF ||
-		   (ia32_cap & ARCH_CAP_FBSDP_NO)) {
+		   (x86_arch_cap_msr & ARCH_CAP_FBSDP_NO)) {
 		static_branch_disable(&mds_idle_clear);
 	}
 }

@@ -2789,7 +2789,7 @@ static const char *spectre_bhi_state(voi
 	else if  (boot_cpu_has(X86_FEATURE_CLEAR_BHB_LOOP))
 		return "; BHI: SW loop, KVM: SW loop";
 	else if (boot_cpu_has(X86_FEATURE_RETPOLINE) &&
-		 !(ia32_cap & ARCH_CAP_RRSBA))
+		 !(x86_arch_cap_msr & ARCH_CAP_RRSBA))
 		return "; BHI: Retpoline";
 	else if  (boot_cpu_has(X86_FEATURE_CLEAR_BHB_LOOP_ON_VMEXIT))
 		return "; BHI: Syscall hardening, KVM: SW loop";

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Josh Poimboeuf <[email protected]>

commit 1cea8a280dfd1016148a3820676f2f03e3f5b898 upstream.

The ARCH_CAP_RRSBA check isn't correct: RRSBA may have already been disabled by the Spectre v2 mitigation (or can otherwise be disabled by the BHI mitigation itself if needed). In that case retpolines are fine.

---
 arch/x86/kernel/cpu/bugs.c |   30 ++++++++++++++++++------------
 1 file changed, 18 insertions(+), 12 deletions(-)

@@ -1515,20 +1515,25 @@ static enum spectre_v2_mitigation __init
 	return SPECTRE_V2_RETPOLINE;
 }
 
+static bool __ro_after_init rrsba_disabled;
+
 /* Disable in-kernel use of non-RSB RET predictors */
 static void __init spec_ctrl_disable_kernel_rrsba(void)
 {
-	u64 x86_arch_cap_msr;
+	if (rrsba_disabled)
+		return;
 
-	if (!boot_cpu_has(X86_FEATURE_RRSBA_CTRL))
+	if (!(x86_arch_cap_msr & ARCH_CAP_RRSBA)) {
+		rrsba_disabled = true;
 		return;
+	}
 
-	x86_arch_cap_msr = x86_read_arch_cap_msr();
+	if (!boot_cpu_has(X86_FEATURE_RRSBA_CTRL))
+		return;
 
-	if (x86_arch_cap_msr & ARCH_CAP_RRSBA) {
-		x86_spec_ctrl_base |= SPEC_CTRL_RRSBA_DIS_S;
-		update_spec_ctrl(x86_spec_ctrl_base);
-	}
+	x86_spec_ctrl_base |= SPEC_CTRL_RRSBA_DIS_S;
+	update_spec_ctrl(x86_spec_ctrl_base);
+	rrsba_disabled = true;
 }
 
 static void __init spectre_v2_determine_rsb_fill_type_at_vmexit(enum spectre_v2_mitigation mode)

@@ -1629,9 +1634,11 @@ static void __init bhi_select_mitigation
 		return;
 
 	/* Retpoline mitigates against BHI unless the CPU has RRSBA behavior */
-	if (cpu_feature_enabled(X86_FEATURE_RETPOLINE) &&
-	    !(x86_read_arch_cap_msr() & ARCH_CAP_RRSBA))
-		return;
+	if (cpu_feature_enabled(X86_FEATURE_RETPOLINE)) {
+		spec_ctrl_disable_kernel_rrsba();
+		if (rrsba_disabled)
+			return;
+	}
 
 	if (spec_ctrl_bhi_dis())
 		return;

@@ -2788,8 +2795,7 @@ static const char *spectre_bhi_state(voi
 		return "; BHI: BHI_DIS_S";
 	else if  (boot_cpu_has(X86_FEATURE_CLEAR_BHB_LOOP))
 		return "; BHI: SW loop, KVM: SW loop";
-	else if (boot_cpu_has(X86_FEATURE_RETPOLINE) &&
-		 !(x86_arch_cap_msr & ARCH_CAP_RRSBA))
+	else if (boot_cpu_has(X86_FEATURE_RETPOLINE) && rrsba_disabled)
 		return "; BHI: Retpoline";
 	else if  (boot_cpu_has(X86_FEATURE_CLEAR_BHB_LOOP_ON_VMEXIT))
 		return "; BHI: Syscall hardening, KVM: SW loop";

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Josh Poimboeuf <[email protected]>

commit 5f882f3b0a8bf0788d5a0ee44b1191de5319bb8a upstream.

While syscall hardening helps prevent some BHI attacks, there's still other low-hanging fruit remaining. Don't classify it as a mitigation and make it clear that the system may still be vulnerable if it doesn't have a HW or SW mitigation enabled.

---
 Documentation/admin-guide/hw-vuln/spectre.rst   |   11 +++++------
 Documentation/admin-guide/kernel-parameters.txt |    3 +--
 arch/x86/kernel/cpu/bugs.c                      |    6 +++---
 3 files changed, 9 insertions(+), 11 deletions(-)

@@ -441,10 +441,10 @@ The possible values in this file are:
    - System is protected by BHI_DIS_S
  * - BHI: SW loop, KVM SW loop
    - System is protected by software clearing sequence
- * - BHI: Syscall hardening
-   - Syscalls are hardened against BHI
- * - BHI: Syscall hardening, KVM: SW loop
-   - System is protected from userspace attacks by syscall hardening; KVM is protected by software clearing sequence
+ * - BHI: Vulnerable
+   - System is vulnerable to BHI
+ * - BHI: Vulnerable, KVM: SW loop
+   - System is vulnerable; KVM is protected by software clearing sequence
 
 Full mitigation might require a microcode update from the CPU
 vendor. When the necessary microcode is not available, the kernel will

@@ -711,8 +711,7 @@ For user space mitigation:
 	spectre_bhi=
 
 		[X86] Control mitigation of Branch History Injection
-		(BHI) vulnerability. Syscalls are hardened against BHI
-		regardless of this setting. This setting affects the deployment
+		(BHI) vulnerability.  This setting affects the deployment
 		of the HW BHI control and the SW BHB clearing sequence.
 
 		on

@@ -5406,8 +5406,7 @@
 			See Documentation/admin-guide/laptops/sonypi.rst
 
 	spectre_bhi=	[X86] Control mitigation of Branch History Injection
-			(BHI) vulnerability. Syscalls are hardened against BHI
-			reglardless of this setting. This setting affects the
+			(BHI) vulnerability.  This setting affects the
 			deployment of the HW BHI control and the SW BHB
 			clearing sequence.
 

@@ -2797,10 +2797,10 @@ static const char *spectre_bhi_state(voi
 		return "; BHI: SW loop, KVM: SW loop";
 	else if (boot_cpu_has(X86_FEATURE_RETPOLINE) && rrsba_disabled)
 		return "; BHI: Retpoline";
-	else if  (boot_cpu_has(X86_FEATURE_CLEAR_BHB_LOOP_ON_VMEXIT))
-		return "; BHI: Syscall hardening, KVM: SW loop";
+	else if (boot_cpu_has(X86_FEATURE_CLEAR_BHB_LOOP_ON_VMEXIT))
+		return "; BHI: Vulnerable, KVM: SW loop";
 
-	return "; BHI: Vulnerable (Syscall hardening enabled)";
+	return "; BHI: Vulnerable";
 }
 
 static ssize_t spectre_v2_show_state(char *buf)

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Josh Poimboeuf <[email protected]>

commit 36d4fe147c870f6d3f6602befd7ef44393a1c87a upstream.

Unlike most other mitigations' "auto" options, spectre_bhi=auto only mitigates newer systems, which is confusing and not particularly useful.

Remove it.

---
 Documentation/admin-guide/hw-vuln/spectre.rst   |    4 ----
 Documentation/admin-guide/kernel-parameters.txt |    3 ---
 arch/x86/Kconfig                                |    4 ----
 arch/x86/kernel/cpu/bugs.c                      |   10 +---------
 4 files changed, 1 insertion(+), 20 deletions(-)

@@ -719,10 +719,6 @@ For user space mitigation:
 			needed.
 		off
 			Disable the mitigation.
-		auto
-			Enable the HW mitigation if needed, but
-			*don't* enable the SW mitigation except for KVM.
-			The system may be vulnerable.
 
 For spectre_v2_user see Documentation/admin-guide/kernel-parameters.txt
 

@@ -5413,9 +5413,6 @@
 			on   - (default) Enable the HW or SW mitigation
 			       as needed.
 			off  - Disable the mitigation.
-			auto - Enable the HW mitigation if needed, but
-			       *don't* enable the SW mitigation except
-			       for KVM.  The system may be vulnerable.
 
 	spectre_v2=	[X86] Control mitigation of Spectre variant 2
 			(indirect branch speculation) vulnerability.

@@ -2523,10 +2523,6 @@ config SPECTRE_BHI_OFF
 	bool "off"
 	help
 	  Equivalent to setting spectre_bhi=off command line parameter.
-config SPECTRE_BHI_AUTO
-	bool "auto"
-	help
-	  Equivalent to setting spectre_bhi=auto command line parameter.
 
 endchoice
 

@@ -1602,13 +1602,10 @@ static bool __init spec_ctrl_bhi_dis(voi
 enum bhi_mitigations {
 	BHI_MITIGATION_OFF,
 	BHI_MITIGATION_ON,
-	BHI_MITIGATION_AUTO,
 };
 
 static enum bhi_mitigations bhi_mitigation __ro_after_init =
-	IS_ENABLED(CONFIG_SPECTRE_BHI_ON)  ? BHI_MITIGATION_ON  :
-	IS_ENABLED(CONFIG_SPECTRE_BHI_OFF) ? BHI_MITIGATION_OFF :
-					     BHI_MITIGATION_AUTO;
+	IS_ENABLED(CONFIG_SPECTRE_BHI_ON) ? BHI_MITIGATION_ON : BHI_MITIGATION_OFF;
 
 static int __init spectre_bhi_parse_cmdline(char *str)
 {

@@ -1619,8 +1616,6 @@ static int __init spectre_bhi_parse_cmdl
 		bhi_mitigation = BHI_MITIGATION_OFF;
 	else if (!strcmp(str, "on"))
 		bhi_mitigation = BHI_MITIGATION_ON;
-	else if (!strcmp(str, "auto"))
-		bhi_mitigation = BHI_MITIGATION_AUTO;
 	else
 		pr_err("Ignoring unknown spectre_bhi option (%s)", str);
 

@@ -1650,9 +1645,6 @@ static void __init bhi_select_mitigation
 	setup_force_cpu_cap(X86_FEATURE_CLEAR_BHB_LOOP_ON_VMEXIT);
 	pr_info("Spectre BHI mitigation: SW BHB clearing on vm exit\n");
 
-	if (bhi_mitigation == BHI_MITIGATION_AUTO)
-		return;
-
 	/* Mitigate syscalls when the mitigation is forced =on */
 	setup_force_cpu_cap(X86_FEATURE_CLEAR_BHB_LOOP);
 	pr_info("Spectre BHI mitigation: SW BHB clearing on syscall\n");

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Josh Poimboeuf <[email protected]>

commit 4f511739c54b549061993b53fc0380f48dfca23b upstream.

For consistency with the other CONFIG_MITIGATION_* options, replace the CONFIG_SPECTRE_BHI_{ON,OFF} options with a single CONFIG_MITIGATION_SPECTRE_BHI option.

[ mingo: Fix ]

---
 arch/x86/Kconfig           |   17 +++--------------
 arch/x86/kernel/cpu/bugs.c |    2 +-
 2 files changed, 4 insertions(+), 15 deletions(-)

@@ -2505,27 +2505,16 @@ config MITIGATION_RFDS
 	  stored in floating point, vector and integer registers.
 	  See also <file:Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst>
 
-choice
-	prompt "Clear branch history"
+config MITIGATION_SPECTRE_BHI
+	bool "Mitigate Spectre-BHB (Branch History Injection)"
 	depends on CPU_SUP_INTEL
-	default SPECTRE_BHI_ON
+	default y
 	help
 	  Enable BHI mitigations. BHI attacks are a form of Spectre V2 attacks
 	  where the branch history buffer is poisoned to speculatively steer
 	  indirect branches.
 	  See <file:Documentation/admin-guide/hw-vuln/spectre.rst>
 
-config SPECTRE_BHI_ON
-	bool "on"
-	help
-	  Equivalent to setting spectre_bhi=on command line parameter.
-config SPECTRE_BHI_OFF
-	bool "off"
-	help
-	  Equivalent to setting spectre_bhi=off command line parameter.
-
-endchoice
-
 endif
 
 config ARCH_HAS_ADD_PAGES

@@ -1605,7 +1605,7 @@ enum bhi_mitigations {
 };
 
 static enum bhi_mitigations bhi_mitigation __ro_after_init =
-	IS_ENABLED(CONFIG_SPECTRE_BHI_ON) ? BHI_MITIGATION_ON : BHI_MITIGATION_OFF;
+	IS_ENABLED(CONFIG_MITIGATION_SPECTRE_BHI) ? BHI_MITIGATION_ON : BHI_MITIGATION_OFF;
 
 static int __init spectre_bhi_parse_cmdline(char *str)
 {

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ville Syrjälä <[email protected]>

commit 7b1f6b5aaec0f849e19c3e99d4eea75876853cdd upstream.

Currently we always reprogram CDCLK from the intel_set_cdclk_pre_plane_update() when using squash/crawl. The code only works correctly for the cd2x update or full modeset cases, and it was simply never updated to deal with squash/crawl.

If the CDCLK frequency is increasing we must reprogram it before we do anything else that might depend on the new higher frequency, and conversely we must not decrease the frequency until everything that might still depend on the old higher frequency has been dealt with.

Since cdclk_state->pipe is only relevant when doing a cd2x update we can't use it to determine the correct sequence during squash/crawl. To that end introduce cdclk_state->disable_pipes which simply indicates that we must perform the update while the pipes are disable (ie. during intel_set_cdclk_pre_plane_update()). Otherwise we use the same old vs. new CDCLK frequency comparsiong as for cd2x updates.

The only remaining problem case is when the voltage_level needs to increase due to a DDI port, but the CDCLK frequency is decreasing (and not all pipes are being disabled). The current approach will not bump the voltage level up until after the port has already been enabled, which is too late. But we'll take care of that case separately.

v2: Don't break the "must disable pipes case"
v3: Keep the on stack 'pipe' for future use

---
 drivers/gpu/drm/i915/display/intel_cdclk.c |    7 +++++--
 drivers/gpu/drm/i915/display/intel_cdclk.h |    3 +++
 2 files changed, 8 insertions(+), 2 deletions(-)

@@ -2000,7 +2000,7 @@ intel_set_cdclk_pre_plane_update(struct
 				 &new_cdclk_state->actual))
 		return;
 
-	if (pipe == INVALID_PIPE ||
+	if (new_cdclk_state->disable_pipes ||
 	    old_cdclk_state->actual.cdclk <= new_cdclk_state->actual.cdclk) {
 		drm_WARN_ON(&dev_priv->drm, !new_cdclk_state->base.changed);
 

@@ -2029,7 +2029,7 @@ intel_set_cdclk_post_plane_update(struct
 				 &new_cdclk_state->actual))
 		return;
 
-	if (pipe != INVALID_PIPE &&
+	if (!new_cdclk_state->disable_pipes &&
 	    old_cdclk_state->actual.cdclk > new_cdclk_state->actual.cdclk) {
 		drm_WARN_ON(&dev_priv->drm, !new_cdclk_state->base.changed);
 

@@ -2456,6 +2456,7 @@ static struct intel_global_state *intel_
 		return NULL;
 
 	cdclk_state->pipe = INVALID_PIPE;
+	cdclk_state->disable_pipes = false;
 
 	return &cdclk_state->base;
 }

@@ -2575,6 +2576,8 @@ int intel_modeset_calc_cdclk(struct inte
 		if (ret)
 			return ret;
 
+		new_cdclk_state->disable_pipes = true;
+
 		drm_dbg_kms(&dev_priv->drm,
 			    "Modeset required for cdclk change\n");
 	}

@@ -52,6 +52,9 @@ struct intel_cdclk_state {
 
 	/* bitmask of active pipes */
 	u8 active_pipes;
+
+	/* update cdclk with pipes disabled */
+	bool disable_pipes;
 };
 
 int intel_crtc_compute_min_cdclk(const struct intel_crtc_state *crtc_state);

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on BMIPS_GENERIC:

Florian

No regressions found on WSL (x86 and arm64).

Built, booted, and reviewed dmesg.

Thank you. :)

Built and booted successfully on RISC-V RV64 (HiFive Unmatched).

Hi Greg,

No problems seen on x86_64 and aarch64 with our testing.