Skip to contentSkip to conversation

env: mmc: print MMC device being read

PATCH In review Quentin Schulz 3 participants 4 messages Apr 15, 2024 – Apr 19, 2024

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 env: mmc: print MMC device being read

From: Quentin Schulz <[email protected]>

This prints the MMC device being read similar to how we print the MMC device we write to when e.g. calling saveenv.

One of the side effects is that the boot log now shows from which MMC device the env was loaded:

Loading Environment from MMC... Reading from MMC(1)... OK

This is useful to identify which MMC device the environment was loaded from for boards where there are more than one (e.g. eMMC and SD card) without adding some debug messages manually.

Sadly, there's no way to know which of the default or redundant environment is being read from env_mmc_load before env_import_redund is called so it is printing a bit later (and possibly after error/warning messages).

---
 env/mmc.c | 3 +++
 1 file changed, 3 insertions(+)
env/mmc.c +3 -0
index da84cddd74f..7afb733e890 100644
@@ -436,6 +436,7 @@ static int env_mmc_load(void)
 
 	ret = env_import_redund((char *)tmp_env1, read1_fail, (char *)tmp_env2,
 				read2_fail, H_EXTERNAL);
+	printf("Reading from %sMMC(%d)... ", gd->env_valid == ENV_REDUND ? "redundant " : "", dev);
 
 fini:
 	fini_mmc_for_env(mmc);
@@ -475,6 +476,8 @@ static int env_mmc_load(void)
 		goto fini;
 	}
 
+	printf("Reading from MMC(%d)... ", dev);
+
 	ret = env_import(buf, 1, H_EXTERNAL);
 	if (!ret) {
 		ep = (env_t *)buf;

---
base-commit: b03b49046af5dfca599d2ce8f0aafed89b97aa91
change-id: 20240415-mmc-loadenv-dev-ced678171e98

Best regards,

Signature · 1 line
Quentin Schulz <[email protected]>
Reviewed-by on v1 1/1
#1 lore raw
Quoted 14 lines · Quentin Schulz

From: Quentin Schulz <[email protected]>

This prints the MMC device being read similar to how we print the MMC device we write to when e.g. calling saveenv.

One of the side effects is that the boot log now shows from which MMC device the env was loaded:

Loading Environment from MMC... Reading from MMC(1)... OK

This is useful to identify which MMC device the environment was loaded from for boards where there are more than one (e.g. eMMC and SD card) without adding some debug messages manually.

Quoted 7 lines

Sadly, there's no way to know which of the default or redundant environment is being read from env_mmc_load before env_import_redund is called so it is printing a bit later (and possibly after error/warning messages).

Signature · 1 line
Tom
Reviewed-by on v1 1/1
#2 lore raw
In reply to Quentin Schulz
Quoted 14 lines · Quentin Schulz

From: Quentin Schulz <[email protected]>

This prints the MMC device being read similar to how we print the MMC device we write to when e.g. calling saveenv.

One of the side effects is that the boot log now shows from which MMC device the env was loaded:

Loading Environment from MMC... Reading from MMC(1)... OK

This is useful to identify which MMC device the environment was loaded from for boards where there are more than one (e.g. eMMC and SD card) without adding some debug messages manually.

Quoted 7 lines

Sadly, there's no way to know which of the default or redundant environment is being read from env_mmc_load before env_import_redund is called so it is printing a bit later (and possibly after error/warning messages).

Looking great to me.

Quoted 33 lines
---
 env/mmc.c | 3 +++
 1 file changed, 3 insertions(+)
env/mmc.c +1 -0
index da84cddd74f..7afb733e890 100644
@@ -436,6 +436,7 @@ static int env_mmc_load(void)
 
 	ret = env_import_redund((char *)tmp_env1, read1_fail, (char 
 *)tmp_env2,
 				read2_fail, H_EXTERNAL);
+	printf("Reading from %sMMC(%d)... ", gd->env_valid == ENV_REDUND ?
 "redundant " : "", dev);
 

fini:

env/mmc.c +2 -1
 	fini_mmc_for_env(mmc);
@@ -475,6 +476,8 @@ static int env_mmc_load(void)
 		goto fini;
 	}
 
+	printf("Reading from MMC(%d)... ", dev);
+
 	ret = env_import(buf, 1, H_EXTERNAL);
 	if (!ret) {
 		ep = (env_t *)buf;
 
---

base-commit: b03b49046af5dfca599d2ce8f0aafed89b97aa91
change-id: 20240415-mmc-loadenv-dev-ced678171e98

Best regards,

#3 lore raw
In reply to Quentin Schulz
Quoted 9 lines · Quentin Schulz

This prints the MMC device being read similar to how we print the MMC device we write to when e.g. calling saveenv.

One of the side effects is that the boot log now shows from which MMC device the env was loaded:

Loading Environment from MMC... Reading from MMC(1)... OK

[...]

Applied to u-boot/master, thanks!

Signature · 1 line
Tom