PCI: dw-rockchip: Fix GPIO initialization flag
PATCH v2 1/1 PCI: dw-rockchip: Fix GPIO initialization flag
PERST is active low according to the PCIe specification.
However, the existing pcie-dw-rockchip.c driver does:gpiod_set_value(..., 0); msleep(100); gpiod_set_value(..., 1); When asserting + deasserting PERST.
This is of course wrong, but because all the device trees for this compatible string have also incorrectly marked this GPIO as ACTIVE_HIGH:
$ git grep -B 10 reset-gpios arch/arm64/boot/dts/rockchip/rk3568* $ git grep -B 10 reset-gpios arch/arm64/boot/dts/rockchip/rk3588*
The actual toggling of PERST is correct.
(And we cannot change it anyway, since that would break device tree compatibility.)
However, this driver does request the GPIO to be initialized as GPIOD_OUT_HIGH, which does cause a silly sequence where PERST gets toggled back and forth for no good reason.
Fix this by requesting the GPIO to be initialized as GPIOD_OUT_LOW (which for this driver means PERST asserted).
This will avoid an unnecessary signal change where PERST gets deasserted (by devm_gpiod_get_optional()) and then gets asserted
(by rockchip_pcie_start_link()) just a few instructions later.
Before patch, debug prints on EP side, when booting RC:
[ 845.606810] pci: PERST asserted by host! [ 852.483985] pci: PERST de-asserted by host! [ 852.503041] pci: PERST asserted by host! [ 852.610318] pci: PERST de-asserted by host!
After patch, debug prints on EP side, when booting RC:
[ 125.107921] pci: PERST asserted by host! [ 132.111429] pci: PERST de-asserted by host!
This extra, very short, PERST assertion + deassertion has been reported to cause issues with certain WLAN controllers, e.g. RTL8822CE.
---
Changes since V1:
-Picked up tags.
-CC stable.
-Clarified commit message.
drivers/pci/controller/dwc/pcie-dw-rockchip.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/pci/controller/dwc/pcie-dw-rockchip.c +1 -1
@@ -240,7 +240,7 @@ static int rockchip_pcie_resource_get(struct platform_device *pdev,return PTR_ERR (rockchip->apb_base); rockchip->rst_gpio =devm_gpiod_get_optional (&pdev->dev,"reset" , -GPIOD_OUT_HIGH ); +GPIOD_OUT_LOW );if (IS_ERR (rockchip->rst_gpio))return PTR_ERR (rockchip->rst_gpio);
Signature · 1 line
2.44.0
Am Dienstag, 16. April 2024, 14:15:22 CEST schrieb Niklas Cassel:
Quoted 36 lines
PERST is active low according to the PCIe specification.
However, the existing
pcie-dw-rockchip.cdriver does:gpiod_set_value(..., 0); msleep(100);gpiod_set_value(..., 1); When asserting + deasserting PERST.This is of course wrong, but because all the device trees for this compatible string have also incorrectly marked this GPIO as
ACTIVE_HIGH:$ git grep -B 10 reset-gpios arch/arm64/boot/dts/rockchip/rk3568* $ git grep -B 10 reset-gpios arch/arm64/boot/dts/rockchip/rk3588*The actual toggling of PERST is correct.
(And we cannot change it anyway, since that would break device tree compatibility.)However, this driver does request the GPIO to be initialized as
GPIOD_OUT_HIGH, which does cause a silly sequence where PERST gets toggled back and forth for no good reason.Fix this by requesting the GPIO to be initialized as
GPIOD_OUT_LOW(which for this driver means PERST asserted).This will avoid an unnecessary signal change where PERST gets deasserted (by
devm_gpiod_get_optional()) and then gets asserted
(byrockchip_pcie_start_link()) just a few instructions later.Before patch, debug prints on EP side, when booting RC:
[ 845.606810] pci: PERST asserted by host! [ 852.483985] pci: PERST de-asserted by host! [ 852.503041] pci: PERST asserted by host! [ 852.610318] pci: PERST de-asserted by host!After patch, debug prints on EP side, when booting RC:
[ 125.107921] pci: PERST asserted by host! [ 132.111429] pci: PERST de-asserted by host!
Quoted 7 lines
This extra, very short, PERST assertion + deassertion has been reported to cause issues with certain WLAN controllers, e.g. RTL8822CE.
Fixes 0e898eb8df4e ("PCI: rockchip-dwc: Add Rockchip RK356X host controller driver")Tested-by Jianfeng Liu <[email protected]>Signed-off-by Niklas Cassel <[email protected]>Reviewed-by Manivannan Sadhasivam <[email protected]>
On rk3588-jaguar
Quoted 1 line · Niklas Cassel
PERST is active low according to the PCIe specification.
Maybe update the subject to mention that this is about PERST# and avoiding an unnecessary toggle.
Also maybe worth using "PERST#" here in the commit log to match the spec and connect with the explicit GPIO levels.
Quoted 67 lines
However, the existing
pcie-dw-rockchip.cdriver does:gpiod_set_value(..., 0); msleep(100);gpiod_set_value(..., 1); When asserting + deasserting PERST.This is of course wrong, but because all the device trees for this compatible string have also incorrectly marked this GPIO as
ACTIVE_HIGH:$ git grep -B 10 reset-gpios arch/arm64/boot/dts/rockchip/rk3568* $ git grep -B 10 reset-gpios arch/arm64/boot/dts/rockchip/rk3588*The actual toggling of PERST is correct.
(And we cannot change it anyway, since that would break device tree compatibility.)However, this driver does request the GPIO to be initialized as
GPIOD_OUT_HIGH, which does cause a silly sequence where PERST gets toggled back and forth for no good reason.Fix this by requesting the GPIO to be initialized as
GPIOD_OUT_LOW(which for this driver means PERST asserted).This will avoid an unnecessary signal change where PERST gets deasserted (by
devm_gpiod_get_optional()) and then gets asserted
(byrockchip_pcie_start_link()) just a few instructions later.Before patch, debug prints on EP side, when booting RC:
[ 845.606810] pci: PERST asserted by host! [ 852.483985] pci: PERST de-asserted by host! [ 852.503041] pci: PERST asserted by host! [ 852.610318] pci: PERST de-asserted by host!After patch, debug prints on EP side, when booting RC:
[ 125.107921] pci: PERST asserted by host! [ 132.111429] pci: PERST de-asserted by host!This extra, very short, PERST assertion + deassertion has been reported to cause issues with certain WLAN controllers, e.g. RTL8822CE.
Fixes 0e898eb8df4e ("PCI: rockchip-dwc: Add Rockchip RK356X host controller driver")Tested-by Jianfeng Liu <[email protected]>Signed-off-by Niklas Cassel <[email protected]>Reviewed-by Manivannan Sadhasivam <[email protected]>Cc [email protected] # 5.15+---
Changes since V1:(quoted diff) +0
-3-Picked up tags. -CC stable. -Clarified commit message. drivers/pci/controller/dwc/pcie-dw-rockchip.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/pci/controller/dwc/pcie-dw-rockchip.c +1
-1@@ -240,7 +240,7 @@ static int rockchip_pcie_resource_get(struct platform_device *pdev,return PTR_ERR (rockchip->apb_base); rockchip->rst_gpio =devm_gpiod_get_optional (&pdev->dev,"reset" , -GPIOD_OUT_HIGH ); +GPIOD_OUT_LOW );if (IS_ERR (rockchip->rst_gpio))return PTR_ERR (rockchip->rst_gpio);Signature · 1 line
2.44.0