netlink: Add nftables spec w/ multi messages
Subsystems (4)
Donald Hunter
maintainerv3 cover netlink: Add nftables spec w/ multi messages
This series adds a ynl spec for nftables and extends ynl with a --multi command line option that makes it possible to send transactional batches for nftables.
This series includes a patch for nfnetlink which adds ACK processing for batch begin/end messages. If you'd prefer that to be sent separately to nf-next then I can do so, but I included it here so that it gets seen in context.
An example of usage is:
./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/nftables.yaml \
--multi batch-begin '{"res-id": 10}' \
--multi newtable '{"name": "test", "nfgen-family": 1}' \
--multi newchain '{"name": "chain", "table": "test", "nfgen-family": 1}' \
--multi batch-end '{"res-id": 10}'
[None, None, None, None]
It can also be used for bundling get requests:
./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/nftables.yaml \
--multi gettable '{"name": "test", "nfgen-family": 1}' \
--multi getchain '{"name": "chain", "table": "test", "nfgen-family": 1}' \
--output-json
[{"name": "test", "use": 1, "handle": 1, "flags": [],
"nfgen-family": 1, "version": 0, "res-id": 2},
{"table": "test", "name": "chain", "handle": 1, "use": 0, "nfgen-family": 1, "version": 0, "res-id": 2}]
There are 2 issues that may be worth resolving:
- ynl reports errors by raising an NlError exception so only the first error gets reported. This could be changed to add errors to the list of responses so that multiple errors can be reported.
- If any message does not get a response (e.g. batch-begin w/o patch 2) then ynl waits indefinitely. A recv timeout could be added which would allow ynl to terminate.
v2 -> v3:
- update the ynl multi code to match the latest return value semantics of ynl
- add a ynl patch to handle acks that use req_value
- update the nfnetlink patch based on feedback from Pablo
- move nfnetlink patch to end of series
v1 -> v2:
- add a patch to nfnetlink to process ACKs for batch begin/end
- handle multiple responses correctly
Donald Hunter (4):
doc/netlink/specs: Add draft nftables spec tools/net/ynl: Add multi message support to ynl tools/net/ynl: Handle acks that use req_value
netfilter: nfnetlink: Handle ACK flags for batch messages
Documentation/netlink/specs/nftables.yaml | 1264 +++++++++++++++++++++ net/netfilter/nfnetlink.c | 5 + tools/net/ynl/cli.py | 25 +- tools/net/ynl/lib/nlspec.py | 12 + tools/net/ynl/lib/ynl.py | 72 +- 5 files changed, 1353 insertions(+), 25 deletions(-) create mode 100644 Documentation/netlink/specs/nftables.yaml
Signature · 1 line
2.44.0
Donald Hunter
maintainerPATCH v3 1/4 doc/netlink/specs: Add draft nftables spec
Add a spec for nftables that has nearly complete coverage of the ops, but limited coverage of rule types and subexpressions.
--- Documentation/netlink/specs/nftables.yaml | 1264 +++++++++++++++++++++ 1 file changed, 1264 insertions(+) create mode 100644 Documentation/netlink/specs/nftables.yaml
Documentation/netlink/specs/nftables.yaml new file +1264 -0
@@ -0,0 +1,1264 @@ +# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) + +name: nftables +protocol: netlink-raw +protonum: 12 + +doc: + Netfilter nftables configuration over netlink. + +definitions: + - + name: nfgenmsg + type: struct + members: + - + name: nfgen-family + type: u8 + - + name: version + type: u8 + - + name: res-id + byte-order: big-endian + type: u16 + - + name: meta-keys + type: enum + entries: + - len + - protocol + - priority + - mark + - iif + - oif + - iifname + - oifname + - iftype + - oiftype + - skuid + - skgid + - nftrace + - rtclassid + - secmark + - nfproto + - l4-proto + - bri-iifname + - bri-oifname + - pkttype + - cpu + - iifgroup + - oifgroup + - cgroup + - prandom + - secpath + - iifkind + - oifkind + - bri-iifpvid + - bri-iifvproto + - time-ns + - time-day + - time-hour + - sdif + - sdifname + - bri-broute + - + name: cmp-ops + type: enum + entries: + - eq + - neq + - lt + - lte + - gt + - gte + - + name: object-type + type: enum + entries: + - unspec + - counter + - quota + - ct-helper + - limit + - connlimit + - tunnel + - ct-timeout + - secmark + - ct-expect + - synproxy + - + name: nat-range-flags + type: flags + entries: + - map-ips + - proto-specified + - proto-random + - persistent + - proto-random-fully + - proto-offset + - netmap + - + name: table-flags + type: flags + entries: + - dormant + - owner + - persist + - + name: chain-flags + type: flags + entries: + - base + - hw-offload + - binding + - + name: set-flags + type: flags + entries: + - anonymous + - constant + - interval + - map + - timeout + - eval + - object + - concat + - expr + +attribute-sets: + - + name: empty-attrs + attributes: + - + name: name + type: string + - + name: batch-attrs + attributes: + - + name: genid + type: u32 + byte-order: big-endian + - + name: table-attrs + attributes: + - + name: name + type: string + doc: name of the table + - + name: flags + type: u32 + byte-order: big-endian + doc: bitmask of flags + enum: table-flags + enum-as-flags: true + - + name: use + type: u32 + byte-order: big-endian + doc: number of chains in this table + - + name: handle + type: u64 + byte-order: big-endian + doc: numeric handle of the table + - + name: userdata + type: binary + doc: user data + - + name: chain-attrs + attributes: + - + name: table + type: string + doc: name of the table containing the chain + - + name: handle + type: u64 + byte-order: big-endian + doc: numeric handle of the chain + - + name: name + type: string + doc: name of the chain + - + name: hook + type: nest + nested-attributes: nft-hook-attrs + doc: hook specification for basechains + - + name: policy + type: u32 + byte-order: big-endian + doc: numeric policy of the chain + - + name: use + type: u32 + byte-order: big-endian + doc: number of references to this chain + - + name: type + type: string + doc: type name of the chain + - + name: counters + type: nest + nested-attributes: nft-counter-attrs + doc: counter specification of the chain + - + name: flags + type: u32 + byte-order: big-endian + doc: chain flags + enum: chain-flags + enum-as-flags: true + - + name: id + type: u32 + byte-order: big-endian + doc: uniquely identifies a chain in a transaction + - + name: userdata + type: binary + doc: user data + - + name: counter-attrs + attributes: + - + name: bytes + type: u64 + byte-order: big-endian + - + name: packets + type: u64 + byte-order: big-endian + - + name: pad + type: pad + - + name: nft-hook-attrs + attributes: + - + name: num + type: u32 + byte-order: big-endian + - + name: priority + type: s32 + byte-order: big-endian + - + name: dev + type: string + doc: net device name + - + name: devs + type: nest + nested-attributes: hook-dev-attrs + doc: list of net devices + - + name: hook-dev-attrs + attributes: + - + name: name + type: string + multi-attr: true + - + name: nft-counter-attrs + attributes: + - + name: bytes + type: u64 + - + name: packets + type: u64 + - + name: rule-attrs + attributes: + - + name: table + type: string + doc: name of the table containing the rule + - + name: chain + type: string + doc: name of the chain containing the rule + - + name: handle + type: u64 + byte-order: big-endian + doc: numeric handle of the rule + - + name: expressions + type: nest + nested-attributes: expr-list-attrs + doc: list of expressions + - + name: compat + type: nest + nested-attributes: rule-compat-attrs + doc: compatibility specifications of the rule + - + name: position + type: u64 + byte-order: big-endian + doc: numeric handle of the previous rule + - + name: userdata + type: binary + doc: user data + - + name: id + type: u32 + doc: uniquely identifies a rule in a transaction + - + name: position-id + type: u32 + doc: transaction unique identifier of the previous rule + - + name: chain-id + type: u32 + doc: add the rule to chain by ID, alternative to chain name + - + name: expr-list-attrs + attributes: + - + name: elem + type: nest + nested-attributes: expr-attrs + multi-attr: true + - + name: expr-attrs + attributes: + - + name: name + type: string + doc: name of the expression type + - + name: data + type: sub-message + sub-message: expr-ops + selector: name + doc: type specific data + - + name: rule-compat-attrs + attributes: + - + name: proto + type: binary + doc: numeric value of the handled protocol + - + name: flags + type: binary + doc: bitmask of flags + - + name: set-attrs + attributes: + - + name: table + type: string + doc: table name + - + name: name + type: string + doc: set name + - + name: flags + type: u32 + enum: set-flags + byte-order: big-endian + doc: bitmask of enum nft_set_flags + - + name: key-type + type: u32 + byte-order: big-endian + doc: key data type, informational purpose only + - + name: key-len + type: u32 + byte-order: big-endian + doc: key data length + - + name: data-type + type: u32 + byte-order: big-endian + doc: mapping data type + - + name: data-len + type: u32 + byte-order: big-endian + doc: mapping data length + - + name: policy + type: u32 + byte-order: big-endian + doc: selection policy + - + name: desc + type: nest + nested-attributes: set-desc-attrs + doc: set description + - + name: id + type: u32 + doc: uniquely identifies a set in a transaction + - + name: timeout + type: u64 + doc: default timeout value + - + name: gc-interval + type: u32 + doc: garbage collection interval + - + name: userdata + type: binary + doc: user data + - + name: pad + type: pad + - + name: obj-type + type: u32 + byte-order: big-endian + doc: stateful object type + - + name: handle + type: u64 + byte-order: big-endian + doc: set handle + - + name: expr + type: nest + nested-attributes: expr-attrs + doc: set expression + multi-attr: true + - + name: expressions + type: nest + nested-attributes: set-list-attrs + doc: list of expressions + - + name: set-desc-attrs + attributes: + - + name: size + type: u32 + byte-order: big-endian + doc: number of elements in set + - + name: concat + type: nest + nested-attributes: set-desc-concat-attrs + doc: description of field concatenation + multi-attr: true + - + name: set-desc-concat-attrs + attributes: + - + name: elem + type: nest + nested-attributes: set-field-attrs + - + name: set-field-attrs + attributes: + - + name: len + type: u32 + byte-order: big-endian + - + name: set-list-attrs + attributes: + - + name: elem + type: nest + nested-attributes: expr-attrs + multi-attr: true + - + name: setelem-attrs + attributes: + - + name: key + type: nest + nested-attributes: data-attrs + doc: key value + - + name: data + type: nest + nested-attributes: data-attrs + doc: data value of mapping + - + name: flags + type: binary + doc: bitmask of nft_set_elem_flags + - + name: timeout + type: u64 + doc: timeout value + - + name: expiration + type: u64 + doc: expiration time + - + name: userdata + type: binary + doc: user data + - + name: expr + type: nest + nested-attributes: expr-attrs + doc: expression + - + name: objref + type: string + doc: stateful object reference + - + name: key-end + type: nest + nested-attributes: data-attrs + doc: closing key value + - + name: expressions + type: nest + nested-attributes: expr-list-attrs + doc: list of expressions + - + name: setelem-list-elem-attrs + attributes: + - + name: elem + type: nest + nested-attributes: setelem-attrs + multi-attr: true + - + name: setelem-list-attrs + attributes: + - + name: table + type: string + - + name: set + type: string + - + name: elements + type: nest + nested-attributes: setelem-list-elem-attrs + - + name: set-id + type: u32 + - + name: gen-attrs + attributes: + - + name: id + type: u32 + byte-order: big-endian + doc: ruleset generation id + - + name: proc-pid + type: u32 + byte-order: big-endian + - + name: proc-name + type: string + - + name: obj-attrs + attributes: + - + name: table + type: string + doc: name of the table containing the expression + - + name: name + type: string + doc: name of this expression type + - + name: type + type: u32 + enum: object-type + byte-order: big-endian + doc: stateful object type + - + name: data + type: sub-message + sub-message: obj-data + selector: type + doc: stateful object data + - + name: use + type: u32 + byte-order: big-endian + doc: number of references to this expression + - + name: handle + type: u64 + byte-order: big-endian + doc: object handle + - + name: pad + type: pad + - + name: userdata + type: binary + doc: user data + - + name: quota-attrs + attributes: + - + name: bytes + type: u64 + byte-order: big-endian + - + name: flags # TODO + type: u32 + byte-order: big-endian + - + name: pad + type: pad + - + name: consumed + type: u64 + byte-order: big-endian + - + name: flowtable-attrs + attributes: + - + name: table + type: string + - + name: name + type: string + - + name: hook + type: nest + nested-attributes: flowtable-hook-attrs + - + name: use + type: u32 + byte-order: big-endian + - + name: handle + type: u64 + byte-order: big-endian + - + name: pad + type: pad + - + name: flags + type: u32 + byte-order: big-endian + - + name: flowtable-hook-attrs + attributes: + - + name: num + type: u32 + byte-order: big-endian + - + name: priority + type: u32 + byte-order: big-endian + - + name: devs + type: nest + nested-attributes: hook-dev-attrs + - + name: expr-cmp-attrs + attributes: + - + name: sreg + type: u32 + byte-order: big-endian + - + name: op + type: u32 + byte-order: big-endian + enum: cmp-ops + - + name: data + type: nest + nested-attributes: data-attrs + - + name: data-attrs + attributes: + - + name: value + type: binary + # sub-type: u8 + - + name: verdict + type: nest + nested-attributes: verdict-attrs + - + name: verdict-attrs + attributes: + - + name: code + type: u32 + byte-order: big-endian + - + name: chain + type: string + - + name: chain-id + type: u32 + - + name: expr-counter-attrs + attributes: + - + name: bytes + type: u64 + doc: Number of bytes + - + name: packets + type: u64 + doc: Number of packets + - + name: pad + type: pad + - + name: expr-flow-offload-attrs + attributes: + - + name: name + type: string + doc: Flow offload table name + - + name: expr-immediate-attrs + attributes: + - + name: dreg + type: u32 + byte-order: big-endian + - + name: data + type: nest + nested-attributes: data-attrs + - + name: expr-meta-attrs + attributes: + - + name: dreg + type: u32 + byte-order: big-endian + - + name: key + type: u32 + byte-order: big-endian + enum: meta-keys + - + name: sreg + type: u32 + byte-order: big-endian + - + name: expr-nat-attrs + attributes: + - + name: type + type: u32 + byte-order: big-endian + - + name: family + type: u32 + byte-order: big-endian + - + name: reg-addr-min + type: u32 + byte-order: big-endian + - + name: reg-addr-max + type: u32 + byte-order: big-endian + - + name: reg-proto-min + type: u32 + byte-order: big-endian + - + name: reg-proto-max + type: u32 + byte-order: big-endian + - + name: flags + type: u32 + byte-order: big-endian + enum: nat-range-flags + enum-as-flags: true + - + name: expr-payload-attrs + attributes: + - + name: dreg + type: u32 + byte-order: big-endian + - + name: base + type: u32 + byte-order: big-endian + - + name: offset + type: u32 + byte-order: big-endian + - + name: len + type: u32 + byte-order: big-endian + - + name: sreg + type: u32 + byte-order: big-endian + - + name: csum-type + type: u32 + byte-order: big-endian + - + name: csum-offset + type: u32 + byte-order: big-endian + - + name: csum-flags + type: u32 + byte-order: big-endian + - + name: expr-tproxy-attrs + attributes: + - + name: family + type: u32 + byte-order: big-endian + - + name: reg-addr + type: u32 + byte-order: big-endian + - + name: reg-port + type: u32 + byte-order: big-endian + +sub-messages: + - + name: expr-ops + formats: + - + value: bitwise # TODO + - + value: cmp + attribute-set: expr-cmp-attrs + - + value: counter + attribute-set: expr-counter-attrs + - + value: ct # TODO + - + value: flow_offload + attribute-set: expr-flow-offload-attrs + - + value: immediate + attribute-set: expr-immediate-attrs + - + value: lookup # TODO + - + value: meta + attribute-set: expr-meta-attrs + - + value: nat + attribute-set: expr-nat-attrs + - + value: payload + attribute-set: expr-payload-attrs + - + value: tproxy + attribute-set: expr-tproxy-attrs + - + name: obj-data + formats: + - + value: counter + attribute-set: counter-attrs + - + value: quota + attribute-set: quota-attrs + +operations: + enum-model: directional + list: + - + name: batch-begin + doc: Start a batch of operations + attribute-set: batch-attrs + fixed-header: nfgenmsg + do: + request: + value: 0x10 + attributes: + - genid + reply: + value: 0x10 + attributes: + - genid + - + name: batch-end + doc: Finish a batch of operations + attribute-set: batch-attrs + fixed-header: nfgenmsg + do: + request: + value: 0x11 + attributes: + - genid + - + name: newtable + doc: Create a new table. + attribute-set: table-attrs + fixed-header: nfgenmsg + do: + request: + value: 0xa00 + attributes: + - name + - + name: gettable + doc: Get / dump tables. + attribute-set: table-attrs + fixed-header: nfgenmsg + do: + request: + value: 0xa01 + attributes: + - name + reply: + value: 0xa00 + attributes: + - name + - + name: deltable + doc: Delete an existing table. + attribute-set: table-attrs + fixed-header: nfgenmsg + do: + request: + value: 0xa02 + attributes: + - name + - + name: destroytable + doc: Delete an existing table with destroy semantics (ignoring ENOENT errors). + attribute-set: table-attrs + fixed-header: nfgenmsg + do: + request: + value: 0xa1a + attributes: + - name + - + name: newchain + doc: Create a new chain. + attribute-set: chain-attrs + fixed-header: nfgenmsg + do: + request: + value: 0xa03 + attributes: + - name + - + name: getchain + doc: Get / dump chains. + attribute-set: chain-attrs + fixed-header: nfgenmsg + do: + request: + value: 0xa04 + attributes: + - name + reply: + value: 0xa03 + attributes: + - name + - + name: delchain + doc: Delete an existing chain. + attribute-set: chain-attrs + fixed-header: nfgenmsg + do: + request: + value: 0xa05 + attributes: + - name + - + name: destroychain + doc: Delete an existing chain with destroy semantics (ignoring ENOENT errors). + attribute-set: chain-attrs + fixed-header: nfgenmsg + do: + request: + value: 0xa1b + attributes: + - name + - + name: newrule + doc: Create a new rule. + attribute-set: rule-attrs + fixed-header: nfgenmsg + do: + request: + value: 0xa06 + attributes: + - name + - + name: getrule + doc: Get / dump rules. + attribute-set: rule-attrs + fixed-header: nfgenmsg + do: + request: + value: 0xa07 + attributes: + - name + reply: + value: 0xa06 + attributes: + - name + - + name: getrule-reset + doc: Get / dump rules and reset stateful expressions. + attribute-set: rule-attrs + fixed-header: nfgenmsg + do: + request: + value: 0xa19 + attributes: + - name + reply: + value: 0xa06 + attributes: + - name + - + name: delrule + doc: Delete an existing rule. + attribute-set: rule-attrs + fixed-header: nfgenmsg + do: + request: + value: 0xa08 + attributes: + - name + - + name: destroyrule + doc: Delete an existing rule with destroy semantics (ignoring ENOENT errors). + attribute-set: rule-attrs + fixed-header: nfgenmsg + do: + request: + value: 0xa1c + attributes: + - name + - + name: newset + doc: Create a new set. + attribute-set: set-attrs + fixed-header: nfgenmsg + do: + request: + value: 0xa09 + attributes: + - name + - + name: getset + doc: Get / dump sets. + attribute-set: set-attrs + fixed-header: nfgenmsg + do: + request: + value: 0xa0a + attributes: + - name + reply: + value: 0xa09 + attributes: + - name + - + name: delset + doc: Delete an existing set. + attribute-set: set-attrs + fixed-header: nfgenmsg + do: + request: + value: 0xa0b + attributes: + - name + - + name: destroyset + doc: Delete an existing set with destroy semantics (ignoring ENOENT errors). + attribute-set: set-attrs + fixed-header: nfgenmsg + do: + request: + value: 0xa1d + attributes: + - name + - + name: newsetelem + doc: Create a new set element. + attribute-set: setelem-list-attrs + fixed-header: nfgenmsg + do: + request: + value: 0xa0c + attributes: + - name + - + name: getsetelem + doc: Get / dump set elements. + attribute-set: setelem-list-attrs + fixed-header: nfgenmsg + do: + request: + value: 0xa0d + attributes: + - name + reply: + value: 0xa0c + attributes: + - name + - + name: getsetelem-reset + doc: Get / dump set elements and reset stateful expressions. + attribute-set: setelem-list-attrs + fixed-header: nfgenmsg + do: + request: + value: 0xa21 + attributes: + - name + reply: + value: 0xa0c + attributes: + - name + - + name: delsetelem + doc: Delete an existing set element. + attribute-set: setelem-list-attrs + fixed-header: nfgenmsg + do: + request: + value: 0xa0e + attributes: + - name + - + name: destroysetelem + doc: Delete an existing set element with destroy semantics. + attribute-set: setelem-list-attrs + fixed-header: nfgenmsg + do: + request: + value: 0xa1e + attributes: + - name + - + name: getgen + doc: Get / dump rule-set generation. + attribute-set: gen-attrs + fixed-header: nfgenmsg + do: + request: + value: 0xa10 + attributes: + - name + reply: + value: 0xa0f + attributes: + - name + - + name: newobj + doc: Create a new stateful object. + attribute-set: obj-attrs + fixed-header: nfgenmsg + do: + request: + value: 0xa12 + attributes: + - name + - + name: getobj + doc: Get / dump stateful objects. + attribute-set: obj-attrs + fixed-header: nfgenmsg + do: + request: + value: 0xa13 + attributes: + - name + reply: + value: 0xa12 + attributes: + - name + - + name: delobj + doc: Delete an existing stateful object. + attribute-set: obj-attrs + fixed-header: nfgenmsg + do: + request: + value: 0xa14 + attributes: + - name + - + name: destroyobj + doc: Delete an existing stateful object with destroy semantics. + attribute-set: obj-attrs + fixed-header: nfgenmsg + do: + request: + value: 0xa1f + attributes: + - name + - + name: newflowtable + doc: Create a new flow table. + attribute-set: flowtable-attrs + fixed-header: nfgenmsg + do: + request: + value: 0xa16 + attributes: + - name + - + name: getflowtable + doc: Get / dump flow tables. + attribute-set: flowtable-attrs + fixed-header: nfgenmsg + do: + request: + value: 0xa17 + attributes: + - name + reply: + value: 0xa16 + attributes: + - name + - + name: delflowtable + doc: Delete an existing flow table. + attribute-set: flowtable-attrs + fixed-header: nfgenmsg + do: + request: + value: 0xa18 + attributes: + - name + - + name: destroyflowtable + doc: Delete an existing flow table with destroy semantics. + attribute-set: flowtable-attrs + fixed-header: nfgenmsg + do: + request: + value: 0xa20 + attributes: + - name + +mcast-groups: + list: + - + name: mgmt
Signature · 1 line
2.44.0
Donald Hunter
maintainerPATCH v3 2/4 tools/net/ynl: Add multi message support to ynl
In reply to Donald HunterAdd a "--multi <do-op> <json>" command line to ynl that makes it possible to add several operations to a single netlink request payload. The --multi command line option is repeated for each operation.
This is used by the nftables family for transaction batches. For example:
./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/nftables.yaml \
--multi batch-begin '{"res-id": 10}' \
--multi newtable '{"name": "test", "nfgen-family": 1}' \
--multi newchain '{"name": "chain", "table": "test", "nfgen-family": 1}' \
--multi batch-end '{"res-id": 10}'
[None, None, None, None]
It can also be used for bundling get requests:
./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/nftables.yaml \
--multi gettable '{"name": "test", "nfgen-family": 1}' \
--multi getchain '{"name": "chain", "table": "test", "nfgen-family": 1}' \
--output-json
[{"name": "test", "use": 1, "handle": 1, "flags": [],
"nfgen-family": 1, "version": 0, "res-id": 2},
{"table": "test", "name": "chain", "handle": 1, "use": 0, "nfgen-family": 1, "version": 0, "res-id": 2}]
--- tools/net/ynl/cli.py | 25 ++++++++++++-- tools/net/ynl/lib/ynl.py | 70 ++++++++++++++++++++++++++++------------ 2 files changed, 71 insertions(+), 24 deletions(-)
tools/net/ynl/cli.py +22 -3
@@ -19,13 +19,28 @@ class YnlEncoder(json.JSONEncoder): def main(): - parser = argparse.ArgumentParser(description='YNL CLI sample') + description = """ + YNL CLI utility - a general purpose netlink utility that uses YAML + specs to drive protocol encoding and decoding. + """ + epilog = """ + The --multi option can be repeated to include several do operations + in the same netlink payload. + """ + + parser = argparse.ArgumentParser(description=description, + epilog=epilog) parser.add_argument('--spec', dest='spec', type=str, required=True) parser.add_argument('--schema', dest='schema', type=str) parser.add_argument('--no-schema', action='store_true') parser.add_argument('--json', dest='json_text', type=str) - parser.add_argument('--do', dest='do', type=str) - parser.add_argument('--dump', dest='dump', type=str) + + group = parser.add_mutually_exclusive_group() + group.add_argument('--do', dest='do', metavar='DO-OPERATION', type=str) + group.add_argument('--multi', dest='multi', nargs=2, action='append', + metavar=('DO-OPERATION', 'JSON_TEXT'), type=str) + group.add_argument('--dump', dest='dump', metavar='DUMP-OPERATION', type=str) + parser.add_argument('--sleep', dest='sleep', type=int) parser.add_argument('--subscribe', dest='ntf', type=str) parser.add_argument('--replace', dest='flags', action='append_const',
@@ -73,6 +88,10 @@ def main(): if args.dump: reply = ynl.dump(args.dump, attrs) output(reply) + if args.multi: + ops = [ (item[0], json.loads(item[1]), args.flags or []) for item in args.multi ] + reply = ynl.do_multi(ops) + output(reply) except NlError as e: print(e) exit(1)
tools/net/ynl/lib/ynl.py +49 -21
117 lines not on this page · raw message
Signature · 1 line
2.44.0
Donald Hunter
maintainerPATCH v3 3/4 tools/net/ynl: Handle acks that use req_value
In reply to Donald HunterThe nfnetlink family uses the directional op model but errors get reported using the request value instead of the reply value.
Add a method get_op_by_value that falls back to returning the request op for directional ops.
--- tools/net/ynl/lib/nlspec.py | 12 ++++++++++++ tools/net/ynl/lib/ynl.py | 2 +- 2 files changed, 13 insertions(+), 1 deletion(-)
tools/net/ynl/lib/nlspec.py +12 -0
@@ -567,6 +567,18 @@ class SpecFamily(SpecElement): return op return None + def get_op_by_value(self, value): + """ + For a given operation value, look up operation spec. Search + by response value first then fall back to request value. This + is required for handling failure cases. + """ + if value in self.rsp_by_value: + return self.rsp_by_value[value] + if self.msg_id_model == 'directional' and value in self.req_by_value: + return self.req_by_value[value] + return None + def resolve(self): self.resolve_up(super())
tools/net/ynl/lib/ynl.py +1 -1
@@ -390,7 +390,7 @@ class NetlinkProtocol: msg = self._decode(nl_msg) fixed_header_size = 0 if ynl: - op = ynl.rsp_by_value[msg.cmd()] + op = ynl.get_op_by_value(msg.cmd()) fixed_header_size = ynl._struct_size(op.fixed_header) msg.raw_attrs = NlAttrs(msg.raw, fixed_header_size) return msg
Signature · 1 line
2.44.0
Jakub Kicinski
maintainerRe: [PATCH net-next v3 3/4] tools/net/ynl: Handle acks that use req_value
Quoted 2 lines · On Tue, 16 Apr 2024 20:32:14 +0100 Donald Hunter wrote:
The nfnetlink family uses the directional op model but errors get reported using the request value instead of the reply value.
What's an error in this case ? "Normal" errors come via NLMSG_ERROR
tools/net/ynl/lib/nlspec.py class SpecFamily(SpecElement): · line 574
Quoted 13 lines
tools/net/ynl/lib/nlspec.py +5
-0@@ -567,6 +567,18 @@ class SpecFamily(SpecElement): return op return None + def get_op_by_value(self, value): + """ + For a given operation value, look up operation spec. Search + by response value first then fall back to request value. This + is required for handling failure cases.
Looks like we're only going to need it in NetlinkProtocol, so that's fine. But let's somehow call out that this is a bit of a hack, so that people don't feel like this is the more correct way of finding the op than direct access to rsp_by_value[].
Donald Hunter
maintainerRe: [PATCH net-next v3 3/4] tools/net/ynl: Handle acks that use req_value
Quoted 5 lines · Jakub Kicinski
Quoted 2 lines · On Tue, 16 Apr 2024 20:32:14 +0100 Donald Hunter wrote:
The nfnetlink family uses the directional op model but errors get reported using the request value instead of the reply value.
What's an error in this case ? "Normal" errors come via
NLMSG_ERROR
Thanks for pointing out what should have been obvious. Looking at it again today, I realise I missed the root cause which was a bug in the extack decoding for directional ops. When I fix that issue, this patch can be dropped.
Quoted 18 lines
tools/net/ynl/lib/nlspec.py class SpecFamily(SpecElement): · line 574
Quoted 13 lines
tools/net/ynl/lib/nlspec.py +5
-0@@ -567,6 +567,18 @@ class SpecFamily(SpecElement): return op return None + def get_op_by_value(self, value): + """ + For a given operation value, look up operation spec. Search + by response value first then fall back to request value. This + is required for handling failure cases.Looks like we're only going to need it in NetlinkProtocol, so that's fine. But let's somehow call out that this is a bit of a hack, so that people don't feel like this is the more correct way of finding the op than direct access to rsp_by_value[].
Jakub Kicinski
maintainerRe: [PATCH net-next v3 3/4] tools/net/ynl: Handle acks that use req_value
Quoted 10 lines · On Wed, 17 Apr 2024 13:51:38 +0100 Donald Hunter wrote:
Quoted 5 lines · On Tue, 16 Apr 2024 20:32:14 +0100 Donald Hunter wrote:
Quoted 2 lines
The nfnetlink family uses the directional op model but errors get reported using the request value instead of the reply value.
What's an error in this case ? "Normal" errors come via
NLMSG_ERRORThanks for pointing out what should have been obvious. Looking at it again today, I realise I missed the root cause which was a bug in the extack decoding for directional ops. When I fix that issue, this patch can be dropped.
Ha :) Feel free to post v4 as soon as ready.
Donald Hunter
maintainerPATCH v3 4/4 netfilter: nfnetlink: Handle ACK flags for batch messages
In reply to Donald HunterThe NLM_F_ACK flag is ignored for nfnetlink batch begin and end messages. This is a problem for ynl which wants to receive an ack for every message it sends, not just the commands in between the begin/end messages.
Add processing for ACKs for begin/end messages and provide responses when requested.
I have checked that iproute2, pyroute2 and systemd are unaffected by this change since none of them use NLM_F_ACK for batch begin/end.
--- net/netfilter/nfnetlink.c | 5 +++++ 1 file changed, 5 insertions(+)
net/netfilter/nfnetlink.c +5 -0
@@ -427,6 +427,9 @@ static void nfnetlink_rcv_batch(struct sk_buff *skb, struct nlmsghdr *nlh,nfnl_unlock (subsys_id); +if (nlh->nlmsg_flags &NLM_F_ACK ) +nfnl_err_add (&err_list, nlh,0 , &extack); +while (skb->len >=nlmsg_total_size (0 )) {int msglen, type;
@@ -573,6 +576,8 @@ static void nfnetlink_rcv_batch(struct sk_buff *skb, struct nlmsghdr *nlh, }else if (err) { ss->abort (net, oskb,NFNL_ABORT_NONE );netlink_ack (oskb,nlmsg_hdr (oskb), err,NULL ); + }else if (nlh->nlmsg_flags &NLM_F_ACK ) { +nfnl_err_add (&err_list, nlh,0 , &extack); } }else {enum nfnl_abort_action abort_action;
Signature · 1 line
2.44.0