Skip to contentSkip to conversation

net: stmmac: Fix MAC-capabilities procedure

PATCH Superseded Serge Semin 3 participants 7 messages Apr 17, 2024 – Apr 19, 2024

Subsystems (5)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

v2 cover net: stmmac: Fix MAC-capabilities procedure

The series got born as a result of the discussions around the recent Yanteng' series adding the Loongson LS7A1000, LS2K1000, LS7A2000, LS2K2000 MACs support:

In particular the Yanteng' patchset needed to implement the Loongson MAC-specific constraints applied to the link speed and link duplex mode. As a result of the discussion with Russel the next preliminary patch was born:

The patch above was a temporal solution utilized by Yanteng for further developments and to move on with the on-going review. This patchset is a refactored version of that single patch with formatting required for the fixes patches.

The main part of the series has already been merged in on v1 stage. The leftover is the cleanup patches which rename stmmac_ops::phylink_get_caps() callback to stmmac_ops::update_caps() and move the MAC-capabilities init/re-init to the phylink MAC-capabilities getter.

Changelog v2:
- Add a new patch (Romain):
[PATCH net-next v2 1/2] net: stmmac: Rename phylink_get_caps() callback to update_caps()
- Resubmit the leftover patches to net-next tree (Paolo).

Serge Semin (2):
net: stmmac: Rename phylink_get_caps() callback to update_caps()
net: stmmac: Move MAC caps init to phylink MAC caps getter

 .../net/ethernet/stmicro/stmmac/dwmac4_core.c |  8 ++---
 drivers/net/ethernet/stmicro/stmmac/hwif.h    |  8 ++---
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 36 +++++++++----------
 3 files changed, 25 insertions(+), 27 deletions(-)
Signature · 1 line
2.43.0
#1 lore raw

PATCH v2 1/2 net: stmmac: Rename phylink_get_caps() callback to update_caps()

Since recent commits the stmmac_ops::phylink_get_caps() callback has no longer been responsible for the phylink MAC capabilities getting, but merely updates the MAC capabilities in the mac_device_info::link::caps field. Rename the callback to comply with the what the method does now.

---

Changelog v2:
- This is a new patch created based on the discussion around patch #4 in the series above.

---
 drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 8 ++++----
 drivers/net/ethernet/stmicro/stmmac/hwif.h        | 8 ++++----
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 +++---
 3 files changed, 11 insertions(+), 11 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c +4 -4
index a38226d7cc6a..b25774d69195 100644
@@ -68,7 +68,7 @@ static void dwmac4_core_init(struct mac_device_info *hw,
 		init_waitqueue_head(&priv->tstamp_busy_wait);
 }
 
-static void dwmac4_phylink_get_caps(struct stmmac_priv *priv)
+static void dwmac4_update_caps(struct stmmac_priv *priv)
 {
 	if (priv->plat->tx_queues_to_use > 1)
 		priv->hw->link.caps &= ~(MAC_10HD | MAC_100HD | MAC_1000HD);
@@ -1190,7 +1190,7 @@ static void dwmac4_set_hw_vlan_mode(struct mac_device_info *hw)
 
 const struct stmmac_ops dwmac4_ops = {
 	.core_init = dwmac4_core_init,
-	.phylink_get_caps = dwmac4_phylink_get_caps,
+	.update_caps = dwmac4_update_caps,
 	.set_mac = stmmac_set_mac,
 	.rx_ipc = dwmac4_rx_ipc_enable,
 	.rx_queue_enable = dwmac4_rx_queue_enable,
@@ -1235,7 +1235,7 @@ const struct stmmac_ops dwmac4_ops = {
 
 const struct stmmac_ops dwmac410_ops = {
 	.core_init = dwmac4_core_init,
-	.phylink_get_caps = dwmac4_phylink_get_caps,
+	.update_caps = dwmac4_update_caps,
 	.set_mac = stmmac_dwmac4_set_mac,
 	.rx_ipc = dwmac4_rx_ipc_enable,
 	.rx_queue_enable = dwmac4_rx_queue_enable,
@@ -1284,7 +1284,7 @@ const struct stmmac_ops dwmac410_ops = {
 
 const struct stmmac_ops dwmac510_ops = {
 	.core_init = dwmac4_core_init,
-	.phylink_get_caps = dwmac4_phylink_get_caps,
+	.update_caps = dwmac4_update_caps,
 	.set_mac = stmmac_dwmac4_set_mac,
 	.rx_ipc = dwmac4_rx_ipc_enable,
 	.rx_queue_enable = dwmac4_rx_queue_enable,
drivers/net/ethernet/stmicro/stmmac/hwif.h +4 -4
index 7be04b54738b..90384db228b5 100644
@@ -308,8 +308,8 @@ struct stmmac_est;
 struct stmmac_ops {
 	/* MAC core initialization */
 	void (*core_init)(struct mac_device_info *hw, struct net_device *dev);
-	/* Get phylink capabilities */
-	void (*phylink_get_caps)(struct stmmac_priv *priv);
+	/* Update MAC capabilities */
+	void (*update_caps)(struct stmmac_priv *priv);
 	/* Enable the MAC RX/TX */
 	void (*set_mac)(void __iomem *ioaddr, bool enable);
 	/* Enable and verify that the IPC module is supported */
@@ -430,8 +430,8 @@ struct stmmac_ops {
 
 #define stmmac_core_init(__priv, __args...) \
 	stmmac_do_void_callback(__priv, mac, core_init, __args)
-#define stmmac_mac_phylink_get_caps(__priv) \
-	stmmac_do_void_callback(__priv, mac, phylink_get_caps, __priv)
+#define stmmac_mac_update_caps(__priv) \
+	stmmac_do_void_callback(__priv, mac, update_caps, __priv)
 #define stmmac_mac_set(__priv, __args...) \
 	stmmac_do_void_callback(__priv, mac, set_mac, __args)
 #define stmmac_rx_ipc(__priv, __args...) \
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +3 -3
index 7c6fb14b5555..b810f6b69bf5 100644
@@ -1225,8 +1225,8 @@ static int stmmac_phy_setup(struct stmmac_priv *priv)
 		xpcs_get_interfaces(priv->hw->xpcs,
 				    priv->phylink_config.supported_interfaces);
 
-	/* Get the MAC specific capabilities */
-	stmmac_mac_phylink_get_caps(priv);
+	/* Refresh the MAC-specific capabilities */
+	stmmac_mac_update_caps(priv);
 
 	priv->phylink_config.mac_capabilities = priv->hw->link.caps;
 
@@ -7341,7 +7341,7 @@ int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt)
 			priv->rss.table[i] = ethtool_rxfh_indir_default(i,
 									rx_cnt);
 
-	stmmac_mac_phylink_get_caps(priv);
+	stmmac_mac_update_caps(priv);
 
 	priv->phylink_config.mac_capabilities = priv->hw->link.caps;
 
Signature · 1 line
2.43.0
Reviewed-by on v2 1/2
#2 lore raw

Re: [PATCH net-next v2 1/2] net: stmmac: Rename phylink_get_caps() callback to update_caps()

Quoted 113 lines · Serge Semin

Since recent commits the stmmac_ops::phylink_get_caps() callback has no longer been responsible for the phylink MAC capabilities getting, but merely updates the MAC capabilities in the mac_device_info::link::caps field. Rename the callback to comply with the what the method does now.

---

Changelog v2:
- This is a new patch created based on the discussion around patch #4 in the series above.

---
 drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 8 ++++----
 drivers/net/ethernet/stmicro/stmmac/hwif.h        | 8 ++++----
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 +++---
 3 files changed, 11 insertions(+), 11 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c +4 -4
index a38226d7cc6a..b25774d69195 100644
@@ -68,7 +68,7 @@ static void dwmac4_core_init(struct mac_device_info *hw,
 		init_waitqueue_head(&priv->tstamp_busy_wait);
 }
 
-static void dwmac4_phylink_get_caps(struct stmmac_priv *priv)
+static void dwmac4_update_caps(struct stmmac_priv *priv)
 {
 	if (priv->plat->tx_queues_to_use > 1)
 		priv->hw->link.caps &= ~(MAC_10HD | MAC_100HD | MAC_1000HD);
@@ -1190,7 +1190,7 @@ static void dwmac4_set_hw_vlan_mode(struct mac_device_info *hw)
 
 const struct stmmac_ops dwmac4_ops = {
 	.core_init = dwmac4_core_init,
-	.phylink_get_caps = dwmac4_phylink_get_caps,
+	.update_caps = dwmac4_update_caps,
 	.set_mac = stmmac_set_mac,
 	.rx_ipc = dwmac4_rx_ipc_enable,
 	.rx_queue_enable = dwmac4_rx_queue_enable,
@@ -1235,7 +1235,7 @@ const struct stmmac_ops dwmac4_ops = {
 
 const struct stmmac_ops dwmac410_ops = {
 	.core_init = dwmac4_core_init,
-	.phylink_get_caps = dwmac4_phylink_get_caps,
+	.update_caps = dwmac4_update_caps,
 	.set_mac = stmmac_dwmac4_set_mac,
 	.rx_ipc = dwmac4_rx_ipc_enable,
 	.rx_queue_enable = dwmac4_rx_queue_enable,
@@ -1284,7 +1284,7 @@ const struct stmmac_ops dwmac410_ops = {
 
 const struct stmmac_ops dwmac510_ops = {
 	.core_init = dwmac4_core_init,
-	.phylink_get_caps = dwmac4_phylink_get_caps,
+	.update_caps = dwmac4_update_caps,
 	.set_mac = stmmac_dwmac4_set_mac,
 	.rx_ipc = dwmac4_rx_ipc_enable,
 	.rx_queue_enable = dwmac4_rx_queue_enable,
drivers/net/ethernet/stmicro/stmmac/hwif.h +4 -4
index 7be04b54738b..90384db228b5 100644
@@ -308,8 +308,8 @@ struct stmmac_est;
 struct stmmac_ops {
 	/* MAC core initialization */
 	void (*core_init)(struct mac_device_info *hw, struct net_device *dev);
-	/* Get phylink capabilities */
-	void (*phylink_get_caps)(struct stmmac_priv *priv);
+	/* Update MAC capabilities */
+	void (*update_caps)(struct stmmac_priv *priv);
 	/* Enable the MAC RX/TX */
 	void (*set_mac)(void __iomem *ioaddr, bool enable);
 	/* Enable and verify that the IPC module is supported */
@@ -430,8 +430,8 @@ struct stmmac_ops {
 
 #define stmmac_core_init(__priv, __args...) \
 	stmmac_do_void_callback(__priv, mac, core_init, __args)
-#define stmmac_mac_phylink_get_caps(__priv) \
-	stmmac_do_void_callback(__priv, mac, phylink_get_caps, __priv)
+#define stmmac_mac_update_caps(__priv) \
+	stmmac_do_void_callback(__priv, mac, update_caps, __priv)
 #define stmmac_mac_set(__priv, __args...) \
 	stmmac_do_void_callback(__priv, mac, set_mac, __args)
 #define stmmac_rx_ipc(__priv, __args...) \
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +3 -3
index 7c6fb14b5555..b810f6b69bf5 100644
@@ -1225,8 +1225,8 @@ static int stmmac_phy_setup(struct stmmac_priv *priv)
 		xpcs_get_interfaces(priv->hw->xpcs,
 				    priv->phylink_config.supported_interfaces);
 
-	/* Get the MAC specific capabilities */
-	stmmac_mac_phylink_get_caps(priv);
+	/* Refresh the MAC-specific capabilities */
+	stmmac_mac_update_caps(priv);
 
 	priv->phylink_config.mac_capabilities = priv->hw->link.caps;
 
@@ -7341,7 +7341,7 @@ int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt)
 			priv->rss.table[i] = ethtool_rxfh_indir_default(i,
 									rx_cnt);
 
-	stmmac_mac_phylink_get_caps(priv);
+	stmmac_mac_update_caps(priv);
 
 	priv->phylink_config.mac_capabilities = priv->hw->link.caps;
 
Signature · 1 line
2.43.0

Thanks,

Signature · 3 lines
Romain Gantois, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
#3 lore raw

PATCH v2 2/2 net: stmmac: Move MAC caps init to phylink MAC caps getter

In reply to Serge Semin

After a set of recent fixes the stmmac_phy_setup() and stmmac_reinit_queues() methods have turned to having some duplicated code. Let's get rid from the duplication by moving the MAC-capabilities initialization to the PHYLINK MAC-capabilities getter. The getter is called during each network device interface open/close cycle. So the MAC-capabilities will be initialized in generic device open procedure and in case of the Tx/Rx queues re-initialization as the original code semantics implies.

---

Changelog v2:
- Resubmit the patch to net-next separately from the main patchset (Paolo)

---
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 36 +++++++++----------
 1 file changed, 17 insertions(+), 19 deletions(-)
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +17 -19
index b810f6b69bf5..0d6cd1704e6a 100644
@@ -936,6 +936,22 @@ static void stmmac_mac_flow_ctrl(struct stmmac_priv *priv, u32 duplex)
 			priv->pause, tx_cnt);
 }
 
+static unsigned long stmmac_mac_get_caps(struct phylink_config *config,
+					 phy_interface_t interface)
+{
+	struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev));
+
+	/* Refresh the MAC-specific capabilities */
+	stmmac_mac_update_caps(priv);
+
+	config->mac_capabilities = priv->hw->link.caps;
+
+	if (priv->plat->max_speed)
+		phylink_limit_mac_speed(config, priv->plat->max_speed);
+
+	return config->mac_capabilities;
+}
+
 static struct phylink_pcs *stmmac_mac_select_pcs(struct phylink_config *config,
 						 phy_interface_t interface)
 {
@@ -1105,6 +1121,7 @@ static void stmmac_mac_link_up(struct phylink_config *config,
 }
 
 static const struct phylink_mac_ops stmmac_phylink_mac_ops = {
+	.mac_get_caps = stmmac_mac_get_caps,
 	.mac_select_pcs = stmmac_mac_select_pcs,
 	.mac_config = stmmac_mac_config,
 	.mac_link_down = stmmac_mac_link_down,
@@ -1204,7 +1221,6 @@ static int stmmac_phy_setup(struct stmmac_priv *priv)
 	int mode = priv->plat->phy_interface;
 	struct fwnode_handle *fwnode;
 	struct phylink *phylink;
-	int max_speed;
 
 	priv->phylink_config.dev = &priv->dev->dev;
 	priv->phylink_config.type = PHYLINK_NETDEV;
@@ -1225,15 +1241,6 @@ static int stmmac_phy_setup(struct stmmac_priv *priv)
 		xpcs_get_interfaces(priv->hw->xpcs,
 				    priv->phylink_config.supported_interfaces);
 
-	/* Refresh the MAC-specific capabilities */
-	stmmac_mac_update_caps(priv);
-
-	priv->phylink_config.mac_capabilities = priv->hw->link.caps;
-
-	max_speed = priv->plat->max_speed;
-	if (max_speed)
-		phylink_limit_mac_speed(&priv->phylink_config, max_speed);
-
 	fwnode = priv->plat->port_node;
 	if (!fwnode)
 		fwnode = dev_fwnode(priv->device);
@@ -7327,7 +7334,6 @@ int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt)
 {
 	struct stmmac_priv *priv = netdev_priv(dev);
 	int ret = 0, i;
-	int max_speed;
 
 	if (netif_running(dev))
 		stmmac_release(dev);
@@ -7341,14 +7347,6 @@ int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt)
 			priv->rss.table[i] = ethtool_rxfh_indir_default(i,
 									rx_cnt);
 
-	stmmac_mac_update_caps(priv);
-
-	priv->phylink_config.mac_capabilities = priv->hw->link.caps;
-
-	max_speed = priv->plat->max_speed;
-	if (max_speed)
-		phylink_limit_mac_speed(&priv->phylink_config, max_speed);
-
 	stmmac_napi_add(dev);
 
 	if (netif_running(dev))
Signature · 1 line
2.43.0
Reviewed-by on v2 2/2
#4 lore raw

Re: [PATCH net-next v2 2/2] net: stmmac: Move MAC caps init to phylink MAC caps getter

Quoted 106 lines · Serge Semin

After a set of recent fixes the stmmac_phy_setup() and stmmac_reinit_queues() methods have turned to having some duplicated code. Let's get rid from the duplication by moving the MAC-capabilities initialization to the PHYLINK MAC-capabilities getter. The getter is called during each network device interface open/close cycle. So the MAC-capabilities will be initialized in generic device open procedure and in case of the Tx/Rx queues re-initialization as the original code semantics implies.

---

Changelog v2:
- Resubmit the patch to net-next separately from the main patchset (Paolo)

---
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 36 +++++++++----------
 1 file changed, 17 insertions(+), 19 deletions(-)
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +17 -19
index b810f6b69bf5..0d6cd1704e6a 100644
@@ -936,6 +936,22 @@ static void stmmac_mac_flow_ctrl(struct stmmac_priv *priv, u32 duplex)
 			priv->pause, tx_cnt);
 }
 
+static unsigned long stmmac_mac_get_caps(struct phylink_config *config,
+					 phy_interface_t interface)
+{
+	struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev));
+
+	/* Refresh the MAC-specific capabilities */
+	stmmac_mac_update_caps(priv);
+
+	config->mac_capabilities = priv->hw->link.caps;
+
+	if (priv->plat->max_speed)
+		phylink_limit_mac_speed(config, priv->plat->max_speed);
+
+	return config->mac_capabilities;
+}
+
 static struct phylink_pcs *stmmac_mac_select_pcs(struct phylink_config *config,
 						 phy_interface_t interface)
 {
@@ -1105,6 +1121,7 @@ static void stmmac_mac_link_up(struct phylink_config *config,
 }
 
 static const struct phylink_mac_ops stmmac_phylink_mac_ops = {
+	.mac_get_caps = stmmac_mac_get_caps,
 	.mac_select_pcs = stmmac_mac_select_pcs,
 	.mac_config = stmmac_mac_config,
 	.mac_link_down = stmmac_mac_link_down,
@@ -1204,7 +1221,6 @@ static int stmmac_phy_setup(struct stmmac_priv *priv)
 	int mode = priv->plat->phy_interface;
 	struct fwnode_handle *fwnode;
 	struct phylink *phylink;
-	int max_speed;
 
 	priv->phylink_config.dev = &priv->dev->dev;
 	priv->phylink_config.type = PHYLINK_NETDEV;
@@ -1225,15 +1241,6 @@ static int stmmac_phy_setup(struct stmmac_priv *priv)
 		xpcs_get_interfaces(priv->hw->xpcs,
 				    priv->phylink_config.supported_interfaces);
 
-	/* Refresh the MAC-specific capabilities */
-	stmmac_mac_update_caps(priv);
-
-	priv->phylink_config.mac_capabilities = priv->hw->link.caps;
-
-	max_speed = priv->plat->max_speed;
-	if (max_speed)
-		phylink_limit_mac_speed(&priv->phylink_config, max_speed);
-
 	fwnode = priv->plat->port_node;
 	if (!fwnode)
 		fwnode = dev_fwnode(priv->device);
@@ -7327,7 +7334,6 @@ int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt)
 {
 	struct stmmac_priv *priv = netdev_priv(dev);
 	int ret = 0, i;
-	int max_speed;
 
 	if (netif_running(dev))
 		stmmac_release(dev);
@@ -7341,14 +7347,6 @@ int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt)
 			priv->rss.table[i] = ethtool_rxfh_indir_default(i,
 									rx_cnt);
 
-	stmmac_mac_update_caps(priv);
-
-	priv->phylink_config.mac_capabilities = priv->hw->link.caps;
-
-	max_speed = priv->plat->max_speed;
-	if (max_speed)
-		phylink_limit_mac_speed(&priv->phylink_config, max_speed);
-
 	stmmac_napi_add(dev);
 
 	if (netif_running(dev))
Signature · 1 line
2.43.0

Thanks,

Signature · 3 lines
Romain Gantois, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
maintainer
#5 lore raw
In reply to Serge Semin
Quoted 16 lines · On Wed, 17 Apr 2024 17:00:06 +0300 Serge Semin wrote:

The series got born as a result of the discussions around the recent Yanteng' series adding the Loongson LS7A1000, LS2K1000, LS7A2000, LS2K2000 MACs support:

In particular the Yanteng' patchset needed to implement the Loongson MAC-specific constraints applied to the link speed and link duplex mode. As a result of the discussion with Russel the next preliminary patch was born:

The patch above was a temporal solution utilized by Yanteng for further developments and to move on with the on-going review. This patchset is a refactored version of that single patch with formatting required for the fixes patches.

Quoted 5 lines

The main part of the series has already been merged in on v1 stage. The leftover is the cleanup patches which rename stmmac_ops::phylink_get_caps() callback to stmmac_ops::update_caps() and move the MAC-capabilities init/re-init to the phylink MAC-capabilities getter.

According to the build bot it didn't apply at the time of posting :S It does apply now but the bot doesn't have a "retry now" button. Could you repost?

Signature · 1 line
pw-bot: cr
#6 lore raw
Quoted 17 lines · Jakub Kicinski
Quoted 16 lines · On Wed, 17 Apr 2024 17:00:06 +0300 Serge Semin wrote:

The series got born as a result of the discussions around the recent Yanteng' series adding the Loongson LS7A1000, LS2K1000, LS7A2000, LS2K2000 MACs support:

In particular the Yanteng' patchset needed to implement the Loongson MAC-specific constraints applied to the link speed and link duplex mode. As a result of the discussion with Russel the next preliminary patch was born:

The patch above was a temporal solution utilized by Yanteng for further developments and to move on with the on-going review. This patchset is a refactored version of that single patch with formatting required for the fixes patches.

Quoted 8 lines
Quoted 5 lines

The main part of the series has already been merged in on v1 stage. The leftover is the cleanup patches which rename stmmac_ops::phylink_get_caps() callback to stmmac_ops::update_caps() and move the MAC-capabilities init/re-init to the phylink MAC-capabilities getter.

According to the build bot it didn't apply at the time of posting :S

Most likely it happened because the first three patches
https://lore.kernel.org/netdev/[email protected]/
hadn't been merged in yet back then. They are now.

Quoted 2 lines

It does apply now but the bot doesn't have a "retry now" button. Could you repost?

Sure. I'll do that in an instant.

-Serge(y)

Quoted 2 lines
Signature · 1 line
pw-bot: cr