SRAT/CEDT fixes and updates
v3 cover SRAT/CEDT fixes and updates
Some fixes and updates for SRAT/CEDT parsing code. Patches can be applied individually and are independent.
First patch fixes a page fault during boot. It should be marked stable.
2nd patch adds diagnostic printouts for CEDT.
Patches 3 to 5 remove architectural code no longer needed.
Changelog:
v3:
* Rebased onto v6.9-rc1
* Fixing x86 build error in sparsemem.h [Dan/Alison]
* Added CEDT node info [Alison]
* Use pr_debug() for table output [Dan]
* Refactoring split in 3 patches [Dan]
* Fixed performance regression introduced [kbot]
* Fixed checkpatch issues [Dan]
Bases on v6.9-rc1.
Robert Richter (5):
x86/numa: Fix SRAT lookup of CFMWS ranges with numa_fill_memblks() ACPI/NUMA: Print CXL Early Discovery Table (CEDT) ACPI/NUMA: Remove architecture dependent remainings ACPI/NUMA: Squash acpi_numa_slit_init() into acpi_parse_slit() ACPI/NUMA: Squash acpi_numa_memory_affinity_init() into
acpi_parse_memory_affinity()
arch/x86/include/asm/sparsemem.h | 2 +- arch/x86/mm/numa.c | 4 +- drivers/acpi/numa/srat.c | 198 +++++++++++++++++++++++-------- include/linux/acpi.h | 5 - 4 files changed, 150 insertions(+), 59 deletions(-)
Signature · 1 line
2.39.2
PATCH v3 1/5 x86/numa: Fix SRAT lookup of CFMWS ranges with numa_fill_memblks()
For configurations that have the kconfig option NUMA_KEEP_MEMINFO disabled, the SRAT lookup done with numa_fill_memblks() fails returning NUMA_NO_MEMBLK (-1). An existing SRAT memory range cannot be found for a CFMWS address range. This causes the addition of a duplicate numa_memblk with a different node id and a subsequent page fault and kernel crash during boot.
numa_fill_memblks() is implemented and used in the init section only. The option NUMA_KEEP_MEMINFO is only for the case when NUMA data will be used outside of init. So fix the SRAT lookup by moving numa_fill_memblks() out of the NUMA_KEEP_MEMINFO block to make it always available in the init section.
Note that the issue was initially introduced with [1]. But since phys_to_target_node() was originally used that returned the valid node 0, an additional numa_memblk was not added. Though, the node id was wrong too.
[1] commit fd49f99c1809 ("ACPI: NUMA: Add a node and memblk for each CFMWS not in SRAT")
--- arch/x86/include/asm/sparsemem.h | 2 +- arch/x86/mm/numa.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-)
arch/x86/include/asm/sparsemem.h +1 -1
@@ -37,9 +37,9 @@ extern int phys_to_target_node(phys_addr_t start);#define phys_to_target_node phys_to_target_nodeextern int memory_add_physaddr_to_nid (u64 start);#define memory_add_physaddr_to_nid memory_add_physaddr_to_nid +#endif extern int numa_fill_memblks (u64 start,u64 end);#define numa_fill_memblks numa_fill_memblks -#endif #endif /* __ASSEMBLY__ */ #endif /* _ASM_X86_SPARSEMEM_H */
arch/x86/mm/numa.c +2 -2
@@ -929,6 +929,8 @@ int memory_add_physaddr_to_nid(u64 start) }EXPORT_SYMBOL_GPL (memory_add_physaddr_to_nid); +#endif +static int __init cmp_memblk (const void *a,const void *b) {const struct numa_memblk *ma = *(const struct numa_memblk **)a;
@@ -1001,5 +1003,3 @@ int __init numa_fill_memblks(u64 start, u64 end) }return 0 ; } - -#endif
Signature · 1 line
2.39.2
Re: [PATCH v3 1/5] x86/numa: Fix SRAT lookup of CFMWS ranges with numa_fill_memblks()
Quoted 21 lines · Robert Richter
For configurations that have the kconfig option
NUMA_KEEP_MEMINFOdisabled, the SRAT lookup done withnuma_fill_memblks()fails returningNUMA_NO_MEMBLK(-1). An existing SRAT memory range cannot be found for a CFMWS address range. This causes the addition of a duplicatenuma_memblkwith a different node id and a subsequent page fault and kernel crash during boot.
numa_fill_memblks()is implemented and used in the init section only. The optionNUMA_KEEP_MEMINFOis only for the case when NUMA data will be used outside of init. So fix the SRAT lookup by movingnuma_fill_memblks()out of theNUMA_KEEP_MEMINFOblock to make it always available in the init section.Note that the issue was initially introduced with [1]. But since
phys_to_target_node()was originally used that returned the valid node 0, an additionalnuma_memblkwas not added. Though, the node id was wrong too.[1] commit
fd49f99c1809("ACPI: NUMA: Add a node and memblk for each CFMWS not in SRAT")
Quoted 6 lines
Fixes 8f1004679987 ("ACPI/NUMA: Apply SRAT proximity domain to entire CFMWS window")Cc Derick Marks <[email protected]>Cc Dan Williams <[email protected]>Cc Alison Schofield <[email protected]>Signed-off-by Robert Richter <[email protected]>---
with the assumption that this is passing 0-day builds...
Quoted 41 lines
arch/x86/include/asm/sparsemem.h | 2 +- arch/x86/mm/numa.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-)arch/x86/include/asm/sparsemem.h +1
-1@@ -37,9 +37,9 @@ extern int phys_to_target_node(phys_addr_t start);#define phys_to_target_node phys_to_target_nodeextern int memory_add_physaddr_to_nid (u64 start);#define memory_add_physaddr_to_nid memory_add_physaddr_to_nid +#endif extern int numa_fill_memblks (u64 start,u64 end);#define numa_fill_memblks numa_fill_memblks -#endif #endif /* __ASSEMBLY__ */ #endif /* _ASM_X86_SPARSEMEM_H */ arch/x86/mm/numa.c +2
-2@@ -929,6 +929,8 @@ int memory_add_physaddr_to_nid(u64 start) }EXPORT_SYMBOL_GPL (memory_add_physaddr_to_nid); +#endif +static int __init cmp_memblk (const void *a,const void *b) {const struct numa_memblk *ma = *(const struct numa_memblk **)a;@@ -1001,5 +1003,3 @@ int __init numa_fill_memblks(u64 start, u64 end) }return 0 ; } - -#endif Signature · 1 line
2.39.2
RE: [PATCH v3 1/5] x86/numa: Fix SRAT lookup of CFMWS ranges with numa_fill_memblks()
In reply to Robert RichterQuoted 13 lines · Robert Richter
For configurations that have the kconfig option
NUMA_KEEP_MEMINFOdisabled, the SRAT lookup done withnuma_fill_memblks()fails returningNUMA_NO_MEMBLK(-1). An existing SRAT memory range cannot be found for a CFMWS address range. This causes the addition of a duplicatenuma_memblkwith a different node id and a subsequent page fault and kernel crash during boot.
numa_fill_memblks()is implemented and used in the init section only. The optionNUMA_KEEP_MEMINFOis only for the case when NUMA data will be used outside of init. So fix the SRAT lookup by movingnuma_fill_memblks()out of theNUMA_KEEP_MEMINFOblock to make it always available in the init section.
Quoted 4 lines
Note that the issue was initially introduced with [1]. But since
phys_to_target_node()was originally used that returned the valid node 0, an additionalnuma_memblkwas not added. Though, the node id was wrong too.
Wrong node seems worth notifying and we can figure out on the backend where the backport makes sense.
Quoted 19 lines
[1] commit
fd49f99c1809("ACPI: NUMA: Add a node and memblk for each CFMWS not in SRAT")Fixes 8f1004679987 ("ACPI/NUMA: Apply SRAT proximity domain to entire CFMWS window")Cc Derick Marks <[email protected]>Cc Dan Williams <[email protected]>Cc Alison Schofield <[email protected]>Signed-off-by Robert Richter <[email protected]>--- arch/x86/include/asm/sparsemem.h | 2 +- arch/x86/mm/numa.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-)arch/x86/include/asm/sparsemem.h +0
-0
arch/x86/include/asm/sparsemem.h extern int phys_to_target_node(phys_addr_t start); · line 42
Quoted 6 lines
arch/x86/include/asm/sparsemem.h +1
-0@@ -37,9 +37,9 @@ extern int phys_to_target_node(phys_addr_t start);#define phys_to_target_node phys_to_target_nodeextern int memory_add_physaddr_to_nid (u64 start);#define memory_add_physaddr_to_nid memory_add_physaddr_to_nid +#endif extern int numa_fill_memblks (u64 start,u64 end);#define numa_fill_memblks numa_fill_memblks
It just feels like numa_fill_memblks() has absolutely no business being defined in arch/x86/include/asm/sparsemem.h.
The only use for numa_fill_memblks() is to arrange for NUMA nodes to be applied to memory ranges hot-onlined by the CXL driver.
It belongs right next to numa_add_memblk(), and I suspect arch/x86/include/asm/sparsemem.h was only chosen to avoid figuring out what to do about the fact that linux/numa.h does not include asm/numa.h and that all implementations either provide numa_add_memblk() or select the generic implementation.
So I would prefer that this do the proper fix and get numa_fill_memblks() completely out of the sparsemem.h path.
Something like the following which boots for me:
arch/x86/include/asm/numa.h +1 -0
@@ -26,6 +26,7 @@ extern s16 __apicid_to_node[MAX_LOCAL_APIC];extern nodemask_t numa_nodes_parsed__initdata ;extern int __init numa_add_memblk (int nodeid,u64 start,u64 end); +extern int __init numa_fill_memblks (u64 start,u64 end);extern void __init numa_set_distance (int from,int to,int distance);static inline void set_apicid_to_node (int apicid,s16 node)
arch/x86/include/asm/sparsemem.h +0 -2
@@ -37,8 +37,6 @@ extern int phys_to_target_node(phys_addr_t start);#define phys_to_target_node phys_to_target_nodeextern int memory_add_physaddr_to_nid (u64 start);#define memory_add_physaddr_to_nid memory_add_physaddr_to_nid -extern int numa_fill_memblks (u64 start,u64 end); -#define numa_fill_memblks numa_fill_memblks#endif #endif /* __ASSEMBLY__ */
drivers/acpi/numa/srat.c +5 -0
@@ -208,6 +208,11 @@ int __init srat_disabled(void)return acpi_numa <0 ; } +__weak int __init numa_fill_memblks (u64 start,u64 end) +{ +return NUMA_NO_MEMBLK ; +} +#if defined(CONFIG_X86 ) || defined(CONFIG_ARM64 ) || defined(CONFIG_LOONGARCH )/* * Callback for SLIT parsing. pxm_to_node() returns NUMA_NO_NODE for
include/linux/numa.h +0 -7
@@ -36,13 +36,6 @@ int memory_add_physaddr_to_nid(u64 start);int phys_to_target_node (u64 start);#endif -#ifndef numa_fill_memblks -static inline int __init numa_fill_memblks (u64 start,u64 end) -{ -return NUMA_NO_MEMBLK ; -} -#endif -#else /* !CONFIG_NUMA */ static inline int numa_nearest_node (int node,unsigned int state) {
Re: [PATCH v3 1/5] x86/numa: Fix SRAT lookup of CFMWS ranges with numa_fill_memblks()
Quoted 14 lines · Dan Williams
Quoted 13 lines · Robert Richter
For configurations that have the kconfig option
NUMA_KEEP_MEMINFOdisabled, the SRAT lookup done withnuma_fill_memblks()fails returningNUMA_NO_MEMBLK(-1). An existing SRAT memory range cannot be found for a CFMWS address range. This causes the addition of a duplicatenuma_memblkwith a different node id and a subsequent page fault and kernel crash during boot.
numa_fill_memblks()is implemented and used in the init section only. The optionNUMA_KEEP_MEMINFOis only for the case when NUMA data will be used outside of init. So fix the SRAT lookup by movingnuma_fill_memblks()out of theNUMA_KEEP_MEMINFOblock to make it always available in the init section.
Quoted 7 lines
Quoted 4 lines
Note that the issue was initially introduced with [1]. But since
phys_to_target_node()was originally used that returned the valid node 0, an additionalnuma_memblkwas not added. Though, the node id was wrong too.Wrong node seems worth notifying and we can figure out on the backend where the backport makes sense.
Updating the description here.
Quoted 39 lines
Quoted 20 lines
[1] commit
fd49f99c1809("ACPI: NUMA: Add a node and memblk for each CFMWS not in SRAT")Fixes 8f1004679987 ("ACPI/NUMA: Apply SRAT proximity domain to entire CFMWS window")Cc Derick Marks <[email protected]>Cc Dan Williams <[email protected]>Cc Alison Schofield <[email protected]>Signed-off-by Robert Richter <[email protected]>--- arch/x86/include/asm/sparsemem.h | 2 +- arch/x86/mm/numa.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-)arch/x86/include/asm/sparsemem.h +0
-0arch/x86/include/asm/sparsemem.h extern int phys_to_target_node(phys_addr_t start); · line 42
Quoted 6 lines
arch/x86/include/asm/sparsemem.h +1
-0@@ -37,9 +37,9 @@ extern int phys_to_target_node(phys_addr_t start);#define phys_to_target_node phys_to_target_nodeextern int memory_add_physaddr_to_nid (u64 start);#define memory_add_physaddr_to_nid memory_add_physaddr_to_nid +#endif extern int numa_fill_memblks (u64 start,u64 end);#define numa_fill_memblks numa_fill_memblksIt just feels like
numa_fill_memblks()has absolutely no business being defined inarch/x86/include/asm/sparsemem.h.The only use for
numa_fill_memblks()is to arrange for NUMA nodes to be applied to memory ranges hot-onlined by the CXL driver.It belongs right next to
numa_add_memblk(), and I suspectarch/x86/include/asm/sparsemem.hwas only chosen to avoid figuring out what to do about the fact thatlinux/numa.hdoes not includeasm/numa.hand that all implementations either providenuma_add_memblk()or select the generic implementation.
Quoted 4 lines
So I would prefer that this do the proper fix and get
numa_fill_memblks()completely out of thesparsemem.hpath.Something like the following which boots for me:
I have kept this patch as a stable change but took your patch on top.
Thanks,
-Robert
PATCH v3 2/5 ACPI/NUMA: Print CXL Early Discovery Table (CEDT)
In reply to Robert RichterThe CEDT contains similar entries as the SRAT. For diagnostic reasons print the CEDT same style as the SRAT.
Adding also a pr_info() when successfully adding a CFMWS memory range.
--- drivers/acpi/numa/srat.c | 122 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 121 insertions(+), 1 deletion(-)
drivers/acpi/numa/srat.c +121 -1
@@ -300,6 +300,114 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)return -EINVAL ; } +static int __init +__acpi_table_print_cedt_entry (union acpi_subtable_headers *__header, +void *arg,const unsigned long table_end) +{ +struct acpi_cedt_header *header = (struct acpi_cedt_header *)__header; + +switch (header->type) { +case ACPI_CEDT_TYPE_CHBS : + { +struct acpi_cedt_chbs *p = + (struct acpi_cedt_chbs *)header; + +if (header->length <sizeof (struct acpi_cedt_chbs )) { +pr_warn ("CEDT: unsupported CHBS entry: size %d\n" , + header->length); +break ; + } + +pr_debug ("CEDT: CHBS (0x%llx length 0x%llx uid %lu) %s (%d)\n" , + (unsigned long long )p->base, + (unsigned long long )p->length, + (unsigned long )p->uid, + (p->cxl_version ==ACPI_CEDT_CHBS_VERSION_CXL11 ) ? +"cxl11" : + (p->cxl_version ==ACPI_CEDT_CHBS_VERSION_CXL20 ) ? +"cxl20" : +"unsupported version" , + p->cxl_version); + } +break ; +case ACPI_CEDT_TYPE_CFMWS : + { +struct acpi_cedt_cfmws *p = + (struct acpi_cedt_cfmws *)header; +int eiw_to_ways[] = {1 ,2 ,4 ,8 ,16 ,3 ,6 ,12 }; +int targets =-1 ; + +if (header->length <sizeof (struct acpi_cedt_cfmws )) { +pr_warn ("CEDT: unsupported CFMWS entry: size %d\n" , + header->length); +break ; + } + +if (p->interleave_ways <ARRAY_SIZE (eiw_to_ways)) + targets = eiw_to_ways[p->interleave_ways]; +if (header->length <struct_size ( + p, interleave_targets, targets)) + targets =-1 ; + +pr_debug ("CEDT: CFMWS (0x%llx length 0x%llx) with %d target%s" , + (unsigned long long )p->base_hpa, + (unsigned long long )p->window_size, + targets, targets >1 ?"s" :"" ); +for (int i =0 ; i < targets; i++) +pr_cont ("%s%lu" , i ?", " :" (" , + (unsigned long )p->interleave_targets[i]); +pr_cont ("%s%s%s%s%s%s\n" , + targets >0 ?")" :"" , + (p->restrictions &ACPI_CEDT_CFMWS_RESTRICT_TYPE2 ) ? +" type2" :"" , + (p->restrictions &ACPI_CEDT_CFMWS_RESTRICT_TYPE3 ) ? +" type3" :"" , + (p->restrictions &ACPI_CEDT_CFMWS_RESTRICT_VOLATILE ) ? +" volatile" :"" , + (p->restrictions &ACPI_CEDT_CFMWS_RESTRICT_PMEM ) ? +" pmem" :"" , + (p->restrictions &ACPI_CEDT_CFMWS_RESTRICT_FIXED ) ? +" fixed" :"" ); + } +break ; +case ACPI_CEDT_TYPE_CXIMS : + { +struct acpi_cedt_cxims *p = + (struct acpi_cedt_cxims *)header; + +if (header->length <sizeof (struct acpi_cedt_cxims )) { +pr_warn ("CEDT: unsupported CXIMS entry: size %d\n" , + header->length); +break ; + } + +pr_debug ("CEDT: CXIMS (hbig %u nr_xormaps %u)\n" , + (unsigned int )p->hbig, + (unsigned int )p->nr_xormaps); + } +break ; +default : +pr_warn ("CEDT: Found unsupported entry (type = 0x%x)\n" , + header->type); +break ; + } + +return 0 ; +} + +static void __init acpi_table_print_cedt_entry (enum acpi_cedt_type id) +{ +acpi_table_parse_cedt (id, __acpi_table_print_cedt_entry,NULL ); +} + +static void __init acpi_table_print_cedt (void ) +{ +/* Print only implemented CEDT types */ +acpi_table_print_cedt_entry (ACPI_CEDT_TYPE_CHBS ); +acpi_table_print_cedt_entry (ACPI_CEDT_TYPE_CFMWS ); +acpi_table_print_cedt_entry (ACPI_CEDT_TYPE_CXIMS ); +} +static int __init acpi_parse_cfmws (union acpi_subtable_headers *header,void *arg,const unsigned long table_end) {
@@ -318,8 +426,11 @@ static int __init acpi_parse_cfmws(union acpi_subtable_headers *header,* found for any portion of the window to cover the entire * window. */ -if (!numa_fill_memblks (start, end)) +if (!numa_fill_memblks (start, end)) { +pr_info ("CEDT: memblk extended [mem %#010Lx-%#010Lx]\n" , + (unsigned long long ) start, (unsigned long long ) end -1 );return 0 ; + }/* No SRAT description. Create a new node. */ node =acpi_map_pxm_to_node (*fake_pxm);
@@ -334,13 +445,19 @@ static int __init acpi_parse_cfmws(union acpi_subtable_headers *header,pr_warn ("ACPI NUMA: Failed to add memblk for CFMWS node %d [mem %#llx-%#llx]\n" , node, start, end); } +node_set (node, numa_nodes_parsed); +pr_info ("CEDT: Node %u PXM %u [mem %#010Lx-%#010Lx]\n" , + node, *fake_pxm, + (unsigned long long ) start, (unsigned long long ) end -1 ); +/* Set the next available fake_pxm value */ (*fake_pxm)++;return 0 ; }#else +static inline void acpi_table_print_cedt (void ) {}static int __init acpi_parse_cfmws (union acpi_subtable_headers *header,void *arg,const unsigned long table_end) {
@@ -526,6 +643,9 @@ int __init acpi_numa_init(void)/* SLIT: System Locality Information Table */ acpi_table_parse (ACPI_SIG_SLIT , acpi_parse_slit); +/* CEDT: CXL Early Discovery Table */ +acpi_table_print_cedt (); +/* * CXL Fixed Memory Window Structures (CFMWS) must be parsed * after the SRAT. Create NUMA Nodes for CXL memory ranges that
Signature · 1 line
2.39.2
Re: [PATCH v3 2/5] ACPI/NUMA: Print CXL Early Discovery Table (CEDT)
Quoted 7 lines · On Fri, 19 Apr 2024 16:02:00 +0200 Robert Richter <[email protected]> wrote:
The CEDT contains similar entries as the SRAT. For diagnostic reasons print the CEDT same style as the SRAT.
Adding also a
pr_info()when successfully adding a CFMWS memory range.Signed-off-by Robert Richter <[email protected]>
Hi Robert,
Comments inline,
Jonathan
Quoted 9 lines
--- drivers/acpi/numa/srat.c | 122 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 121 insertions(+), 1 deletion(-)drivers/acpi/numa/srat.c +0
-0
drivers/acpi/numa/srat.c acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) · line 307
Quoted 8 lines
drivers/acpi/numa/srat.c +5
-0@@ -300,6 +300,114 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)return -EINVAL ; } +static int __init +__acpi_table_print_cedt_entry (union acpi_subtable_headers *__header, +void *arg,const unsigned long table_end) +{ +struct acpi_cedt_header *header = (struct acpi_cedt_header *)__header;
As below. There is very little shred by the different types in here, so I'd break it up into separate functions and just call the relevant one.
drivers/acpi/numa/srat.c acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) · line 315
Quoted 8 lines
drivers/acpi/numa/srat.c +8
-0+ +switch (header->type) { +case ACPI_CEDT_TYPE_CHBS : + { +struct acpi_cedt_chbs *p = + (struct acpi_cedt_chbs *)header; + +if (header->length <sizeof (struct acpi_cedt_chbs )) {
sizeof(*p) perhaps?
Quoted 15 lines
drivers/acpi/numa/srat.c +15
-0+pr_warn ("CEDT: unsupported CHBS entry: size %d\n" , + header->length); +break ; + } + +pr_debug ("CEDT: CHBS (0x%llx length 0x%llx uid %lu) %s (%d)\n" , + (unsigned long long )p->base, + (unsigned long long )p->length, + (unsigned long )p->uid, + (p->cxl_version ==ACPI_CEDT_CHBS_VERSION_CXL11 ) ? +"cxl11" : + (p->cxl_version ==ACPI_CEDT_CHBS_VERSION_CXL20 ) ? +"cxl20" : +"unsupported version" , + p->cxl_version);
drivers/acpi/numa/srat.c acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) · line 340
Quoted 10 lines
drivers/acpi/numa/srat.c +10
-0+ } +break ; +case ACPI_CEDT_TYPE_CFMWS : + { +struct acpi_cedt_cfmws *p = + (struct acpi_cedt_cfmws *)header; +int eiw_to_ways[] = {1 ,2 ,4 ,8 ,16 ,3 ,6 ,12 }; +int targets =-1 ; + +if (header->length <sizeof (struct acpi_cedt_cfmws )) {
sizeof(*p) perhaps?
drivers/acpi/numa/srat.c acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) · line 350
Quoted 10 lines
drivers/acpi/numa/srat.c +10
-0+pr_warn ("CEDT: unsupported CFMWS entry: size %d\n" , + header->length); +break ; + } + +if (p->interleave_ways <ARRAY_SIZE (eiw_to_ways)) + targets = eiw_to_ways[p->interleave_ways]; +if (header->length <struct_size ( + p, interleave_targets, targets)) + targets =-1 ;
Not a warning?
drivers/acpi/numa/srat.c acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) · line 358
Quoted 8 lines
drivers/acpi/numa/srat.c +8
-0+ +pr_debug ("CEDT: CFMWS (0x%llx length 0x%llx) with %d target%s" , + (unsigned long long )p->base_hpa, + (unsigned long long )p->window_size, + targets, targets >1 ?"s" :"" ); +for (int i =0 ; i < targets; i++) +pr_cont ("%s%lu" , i ?", " :" (" , + (unsigned long )p->interleave_targets[i]);
This seems odd. I don't think there is a good way to do combined pr_debug() and pr_cont() There was a discussion about this a few years ago...
Quoted 10 lines
drivers/acpi/numa/srat.c +10
-0+ pr_cont("%s%s%s%s%s%s\n", + targets > 0 ? ")" : "", + (p->restrictions & ACPI_CEDT_CFMWS_RESTRICT_TYPE2) ? + " type2" : "", + (p->restrictions & ACPI_CEDT_CFMWS_RESTRICT_TYPE3) ? + " type3" : "", + (p->restrictions & ACPI_CEDT_CFMWS_RESTRICT_VOLATILE) ? + " volatile" : "", + (p->restrictions & ACPI_CEDT_CFMWS_RESTRICT_PMEM) ? + " pmem" : "",
drivers/acpi/numa/srat.c acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) · line 378
Quoted 10 lines
drivers/acpi/numa/srat.c +10
-0+ (p->restrictions &ACPI_CEDT_CFMWS_RESTRICT_FIXED ) ? + " fixed" : ""); + } +break ; +case ACPI_CEDT_TYPE_CXIMS : + { +struct acpi_cedt_cxims *p = + (struct acpi_cedt_cxims *)header; + +if (header->length <sizeof (struct acpi_cedt_cxims )) {
sizeof(*p) perhaps?
drivers/acpi/numa/srat.c acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) · line 381
Quoted 3 lines
drivers/acpi/numa/srat.c +3
-0+pr_warn ("CEDT: unsupported CXIMS entry: size %d\n" , + header->length); +break ;
I'd go with direct returns in these to make the code flow easier to read.
Quoted 17 lines
drivers/acpi/numa/srat.c +17
-0+ } + +pr_debug ("CEDT: CXIMS (hbig %u nr_xormaps %u)\n" , + (unsigned int )p->hbig, + (unsigned int )p->nr_xormaps); + } +break ; +default : +pr_warn ("CEDT: Found unsupported entry (type = 0x%x)\n" , + header->type); +break ; + } + +return 0 ; +} + +static void __init acpi_table_print_cedt_entry (enum acpi_cedt_type id)
drivers/acpi/numa/srat.c acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) · line 408
Quoted 10 lines
drivers/acpi/numa/srat.c +10
-0+{ +acpi_table_parse_cedt (id, __acpi_table_print_cedt_entry,NULL ); +} + +static void __init acpi_table_print_cedt (void ) +{ +/* Print only implemented CEDT types */ +acpi_table_print_cedt_entry (ACPI_CEDT_TYPE_CHBS ); +acpi_table_print_cedt_entry (ACPI_CEDT_TYPE_CFMWS ); +acpi_table_print_cedt_entry (ACPI_CEDT_TYPE_CXIMS );
Would this be cleaner just breaking these up?
acpi_table_parse_cedt(ACPI_CEDT_TYPE_CHBS, print_chbs_entry, NULL); acpi_table_parse_cedt(ACPI_CEDT_TYPE_CFMWS, print_cfmws_entry, NULL); acpi_table_parse_cedt(ACPI_CEDT_TYPE_CXIMS, print_cxims_entry, NULL);
Quoted 19 lines
drivers/acpi/numa/srat.c +6
-1+} +static int __init acpi_parse_cfmws (union acpi_subtable_headers *header,void *arg,const unsigned long table_end) {@@ -318,8 +426,11 @@ static int __init acpi_parse_cfmws(union acpi_subtable_headers *header,* found for any portion of the window to cover the entire * window. */ -if (!numa_fill_memblks (start, end)) +if (!numa_fill_memblks (start, end)) { +pr_info ("CEDT: memblk extended [mem %#010Lx-%#010Lx]\n" , + (unsigned long long ) start, (unsigned long long ) end -1 );return 0 ; + }/* No SRAT description. Create a new node. */ node =acpi_map_pxm_to_node (*fake_pxm);
drivers/acpi/numa/srat.c static int __init acpi_parse_cfmws(union acpi_subtable_headers *header, · line 448
Quoted 4 lines
drivers/acpi/numa/srat.c +1
-0@@ -334,13 +445,19 @@ static int __init acpi_parse_cfmws(union acpi_subtable_headers *header,pr_warn ("ACPI NUMA: Failed to add memblk for CFMWS node %d [mem %#llx-%#llx]\n" , node, start, end); } +
Unrelated changed. Best to clean this out to avoid the (really minor) noise.
Quoted 25 lines
drivers/acpi/numa/srat.c +8
-0node_set (node, numa_nodes_parsed); +pr_info ("CEDT: Node %u PXM %u [mem %#010Lx-%#010Lx]\n" , + node, *fake_pxm, + (unsigned long long ) start, (unsigned long long ) end -1 ); +/* Set the next available fake_pxm value */ (*fake_pxm)++; return 0; }#else +static inline void acpi_table_print_cedt (void ) {}static int __init acpi_parse_cfmws (union acpi_subtable_headers *header,void *arg,const unsigned long table_end) {@@ -526,6 +643,9 @@ int __init acpi_numa_init(void)/* SLIT: System Locality Information Table */ acpi_table_parse (ACPI_SIG_SLIT , acpi_parse_slit); +/* CEDT: CXL Early Discovery Table */ +acpi_table_print_cedt (); +/* * CXL Fixed Memory Window Structures (CFMWS) must be parsed * after the SRAT. Create NUMA Nodes for CXL memory ranges that
Re: [PATCH v3 2/5] ACPI/NUMA: Print CXL Early Discovery Table (CEDT)
In reply to Robert RichterQuoted 6 lines · Robert Richter
The CEDT contains similar entries as the SRAT. For diagnostic reasons print the CEDT same style as the SRAT.
Adding also a
pr_info()when successfully adding a CFMWS memory range.
Ah, I see you annotated the Suggested-by. I did suggest the pr_info when we extend or add a node during CFMWS parsing.
There is an update in acpitools for CEDT decode and dump[1] offering pretty dumps of this info. Is this printing for convenience or for something else?
[1] https://github.com/acpica/acpica/pull/939
-- Alison
Quoted 170 lines
Signed-off-by Robert Richter <[email protected]>--- drivers/acpi/numa/srat.c | 122 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 121 insertions(+), 1 deletion(-)drivers/acpi/numa/srat.c +121
-1@@ -300,6 +300,114 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)return -EINVAL ; } +static int __init +__acpi_table_print_cedt_entry (union acpi_subtable_headers *__header, +void *arg,const unsigned long table_end) +{ +struct acpi_cedt_header *header = (struct acpi_cedt_header *)__header; + +switch (header->type) { +case ACPI_CEDT_TYPE_CHBS : + { +struct acpi_cedt_chbs *p = + (struct acpi_cedt_chbs *)header; + +if (header->length <sizeof (struct acpi_cedt_chbs )) { +pr_warn ("CEDT: unsupported CHBS entry: size %d\n" , + header->length); +break ; + } + +pr_debug ("CEDT: CHBS (0x%llx length 0x%llx uid %lu) %s (%d)\n" , + (unsigned long long )p->base, + (unsigned long long )p->length, + (unsigned long )p->uid, + (p->cxl_version ==ACPI_CEDT_CHBS_VERSION_CXL11 ) ? +"cxl11" : + (p->cxl_version ==ACPI_CEDT_CHBS_VERSION_CXL20 ) ? +"cxl20" : +"unsupported version" , + p->cxl_version); + } +break ; +case ACPI_CEDT_TYPE_CFMWS : + { +struct acpi_cedt_cfmws *p = + (struct acpi_cedt_cfmws *)header; +int eiw_to_ways[] = {1 ,2 ,4 ,8 ,16 ,3 ,6 ,12 }; +int targets =-1 ; + +if (header->length <sizeof (struct acpi_cedt_cfmws )) { +pr_warn ("CEDT: unsupported CFMWS entry: size %d\n" , + header->length); +break ; + } + +if (p->interleave_ways <ARRAY_SIZE (eiw_to_ways)) + targets = eiw_to_ways[p->interleave_ways]; +if (header->length <struct_size ( + p, interleave_targets, targets)) + targets =-1 ; + +pr_debug ("CEDT: CFMWS (0x%llx length 0x%llx) with %d target%s" , + (unsigned long long )p->base_hpa, + (unsigned long long )p->window_size, + targets, targets >1 ?"s" :"" ); +for (int i =0 ; i < targets; i++) +pr_cont ("%s%lu" , i ?", " :" (" , + (unsigned long )p->interleave_targets[i]); +pr_cont ("%s%s%s%s%s%s\n" , + targets >0 ?")" :"" , + (p->restrictions &ACPI_CEDT_CFMWS_RESTRICT_TYPE2 ) ? +" type2" :"" , + (p->restrictions &ACPI_CEDT_CFMWS_RESTRICT_TYPE3 ) ? +" type3" :"" , + (p->restrictions &ACPI_CEDT_CFMWS_RESTRICT_VOLATILE ) ? +" volatile" :"" , + (p->restrictions &ACPI_CEDT_CFMWS_RESTRICT_PMEM ) ? +" pmem" :"" , + (p->restrictions &ACPI_CEDT_CFMWS_RESTRICT_FIXED ) ? +" fixed" :"" ); + } +break ; +case ACPI_CEDT_TYPE_CXIMS : + { +struct acpi_cedt_cxims *p = + (struct acpi_cedt_cxims *)header; + +if (header->length <sizeof (struct acpi_cedt_cxims )) { +pr_warn ("CEDT: unsupported CXIMS entry: size %d\n" , + header->length); +break ; + } + +pr_debug ("CEDT: CXIMS (hbig %u nr_xormaps %u)\n" , + (unsigned int )p->hbig, + (unsigned int )p->nr_xormaps); + } +break ; +default : +pr_warn ("CEDT: Found unsupported entry (type = 0x%x)\n" , + header->type); +break ; + } + +return 0 ; +} + +static void __init acpi_table_print_cedt_entry (enum acpi_cedt_type id) +{ +acpi_table_parse_cedt (id, __acpi_table_print_cedt_entry,NULL ); +} + +static void __init acpi_table_print_cedt (void ) +{ +/* Print only implemented CEDT types */ +acpi_table_print_cedt_entry (ACPI_CEDT_TYPE_CHBS ); +acpi_table_print_cedt_entry (ACPI_CEDT_TYPE_CFMWS ); +acpi_table_print_cedt_entry (ACPI_CEDT_TYPE_CXIMS ); +} +static int __init acpi_parse_cfmws (union acpi_subtable_headers *header,void *arg,const unsigned long table_end) {@@ -318,8 +426,11 @@ static int __init acpi_parse_cfmws(union acpi_subtable_headers *header,* found for any portion of the window to cover the entire * window. */ -if (!numa_fill_memblks (start, end)) +if (!numa_fill_memblks (start, end)) { +pr_info ("CEDT: memblk extended [mem %#010Lx-%#010Lx]\n" , + (unsigned long long ) start, (unsigned long long ) end -1 );return 0 ; + }/* No SRAT description. Create a new node. */ node =acpi_map_pxm_to_node (*fake_pxm);@@ -334,13 +445,19 @@ static int __init acpi_parse_cfmws(union acpi_subtable_headers *header,pr_warn ("ACPI NUMA: Failed to add memblk for CFMWS node %d [mem %#llx-%#llx]\n" , node, start, end); } +node_set (node, numa_nodes_parsed); +pr_info ("CEDT: Node %u PXM %u [mem %#010Lx-%#010Lx]\n" , + node, *fake_pxm, + (unsigned long long ) start, (unsigned long long ) end -1 ); +/* Set the next available fake_pxm value */ (*fake_pxm)++;return 0 ; }#else +static inline void acpi_table_print_cedt (void ) {}static int __init acpi_parse_cfmws (union acpi_subtable_headers *header,void *arg,const unsigned long table_end) {@@ -526,6 +643,9 @@ int __init acpi_numa_init(void)/* SLIT: System Locality Information Table */ acpi_table_parse (ACPI_SIG_SLIT , acpi_parse_slit); +/* CEDT: CXL Early Discovery Table */ +acpi_table_print_cedt (); +/* * CXL Fixed Memory Window Structures (CFMWS) must be parsed * after the SRAT. Create NUMA Nodes for CXL memory ranges that Signature · 1 line
2.39.2
Re: [PATCH v3 2/5] ACPI/NUMA: Print CXL Early Discovery Table (CEDT)
Quoted 10 lines · Alison Schofield
Quoted 6 lines · Robert Richter
The CEDT contains similar entries as the SRAT. For diagnostic reasons print the CEDT same style as the SRAT.
Adding also a
pr_info()when successfully adding a CFMWS memory range.Ah, I see you annotated the Suggested-by. I did suggest the
pr_infowhen we extend or add a node during CFMWS parsing.
That's what I meant here and what I have added to this patch with this update.
Quoted 4 lines
There is an update in acpitools for CEDT decode and dump[1] offering pretty dumps of this info. Is this printing for convenience or for something else?
No, this helped early boot debugging of kernel and ACPI issues since CEDT entries are important for this. For acpitools you need the machine to be up already. If it is not part of the kernel log there would be a 2nd step needed to get this information from. The patch also lifts CEDT logging to the same level as for SRAT.
I hope that makes sense?
Thanks,
-Robert
Quoted 4 lines
[1] https://github.com/acpica/acpica/pull/939
-- Alison
RE: [PATCH v3 2/5] ACPI/NUMA: Print CXL Early Discovery Table (CEDT)
In reply to Robert RichterQuoted 7 lines · Robert Richter
The CEDT contains similar entries as the SRAT. For diagnostic reasons print the CEDT same style as the SRAT.
Adding also a
pr_info()when successfully adding a CFMWS memory range.Signed-off-by Robert Richter <[email protected]>
This patch feels out of place with the rest. At a minimum it should come at the end. For me, I would just drop it altogether unless there is some motivation to enable more bootup debug messages.
PATCH v3 3/5 ACPI/NUMA: Remove architecture dependent remainings
In reply to Robert RichterWith the removal of the Itanium architecture [1] the last architecture dependent functions:
acpi_numa_slit_init(), acpi_numa_memory_affinity_init()
were removed. Remove its remainings in the header files too an make them static.
[1] commit cf8e8658100d ("arch: Remove Itanium (IA-64) architecture")
--- drivers/acpi/numa/srat.c | 17 ++--------------- include/linux/acpi.h | 5 ----- 2 files changed, 2 insertions(+), 20 deletions(-)
drivers/acpi/numa/srat.c +2 -15
@@ -208,13 +208,12 @@ int __init srat_disabled(void)return acpi_numa <0 ; } -#if defined(CONFIG_X86 ) || defined(CONFIG_ARM64 ) || defined(CONFIG_LOONGARCH )/* * Callback for SLIT parsing. pxm_to_node() returns NUMA_NO_NODE for * I/O localities since SRAT does not list them. I/O localities are * not supported at this point. */ -void __init acpi_numa_slit_init (struct acpi_table_slit *slit) +static void __init acpi_numa_slit_init (struct acpi_table_slit *slit) {int i, j;
@@ -236,11 +235,7 @@ void __init acpi_numa_slit_init(struct acpi_table_slit *slit) } } -/* -* Default callback for parsing of the Proximity Domain <-> Memory -* Area mappings -*/ -int __init +static int __init acpi_numa_memory_affinity_init (struct acpi_srat_mem_affinity *ma) {u64 start, end;
@@ -456,14 +451,6 @@ static int __init acpi_parse_cfmws(union acpi_subtable_headers *header, (*fake_pxm)++;return 0 ; } -#else -static inline void acpi_table_print_cedt (void ) {} -static int __init acpi_parse_cfmws (union acpi_subtable_headers *header, -void *arg,const unsigned long table_end) -{ -return 0 ; -} -#endif /* defined(CONFIG_X86) || defined (CONFIG_ARM64) */ static int __init acpi_parse_slit (struct acpi_table_header *table) {
include/linux/acpi.h +0 -5
@@ -242,9 +242,6 @@ static inline bool acpi_gicc_is_usable(struct acpi_madt_generic_interrupt *gicc)return gicc->flags &ACPI_MADT_ENABLED ; } -/* the following numa functions are architecture-dependent */ -void acpi_numa_slit_init (struct acpi_table_slit *slit); -#if defined(CONFIG_X86 ) || defined(CONFIG_LOONGARCH )void acpi_numa_processor_affinity_init (struct acpi_srat_cpu_affinity *pa);#else
@@ -267,8 +264,6 @@ static inline void acpi_numa_gicc_affinity_init(struct acpi_srat_gicc_affinity *pa) { }#endif -int acpi_numa_memory_affinity_init (struct acpi_srat_mem_affinity *ma); -#ifndef PHYS_CPUID_INVALID typedef u32 phys_cpuid_t ;#define PHYS_CPUID_INVALID (phys_cpuid_t)(-1)
Signature · 1 line
2.39.2
Re: [PATCH v3 3/5] ACPI/NUMA: Remove architecture dependent remainings
Quoted 11 lines · On Fri, 19 Apr 2024 16:02:01 +0200 Robert Richter <[email protected]> wrote:
With the removal of the Itanium architecture [1] the last architecture dependent functions:
acpi_numa_slit_init(),acpi_numa_memory_affinity_init()were removed. Remove its remainings in the header files too an make them static.
[1] commit
cf8e8658100d("arch: Remove Itanium (IA-64) architecture")Signed-off-by Robert Richter <[email protected]>
The slit change is fine, but what about the cfmws function in here where a stub was removed as well. Looks sensible as it relied on the implementation details of acpi_numa_memory_affinity_init() but should probably call it out in the description and say why it no longer needs to be protected like this.
Jonathan
Quoted 75 lines
--- drivers/acpi/numa/srat.c | 17 ++--------------- include/linux/acpi.h | 5 ----- 2 files changed, 2 insertions(+), 20 deletions(-)drivers/acpi/numa/srat.c +2
-15@@ -208,13 +208,12 @@ int __init srat_disabled(void)return acpi_numa <0 ; } -#if defined(CONFIG_X86 ) || defined(CONFIG_ARM64 ) || defined(CONFIG_LOONGARCH )/* * Callback for SLIT parsing. pxm_to_node() returns NUMA_NO_NODE for * I/O localities since SRAT does not list them. I/O localities are * not supported at this point. */ -void __init acpi_numa_slit_init (struct acpi_table_slit *slit) +static void __init acpi_numa_slit_init (struct acpi_table_slit *slit) {int i, j;@@ -236,11 +235,7 @@ void __init acpi_numa_slit_init(struct acpi_table_slit *slit) } } -/* -* Default callback for parsing of the Proximity Domain <-> Memory -* Area mappings -*/ -int __init +static int __init acpi_numa_memory_affinity_init (struct acpi_srat_mem_affinity *ma) {u64 start, end;@@ -456,14 +451,6 @@ static int __init acpi_parse_cfmws(union acpi_subtable_headers *header, (*fake_pxm)++;return 0 ; } -#else -static inline void acpi_table_print_cedt (void ) {} -static int __init acpi_parse_cfmws (union acpi_subtable_headers *header, -void *arg,const unsigned long table_end) -{ -return 0 ; -} -#endif /* defined(CONFIG_X86) || defined (CONFIG_ARM64) */ static int __init acpi_parse_slit (struct acpi_table_header *table) {include/linux/acpi.h +0
-5@@ -242,9 +242,6 @@ static inline bool acpi_gicc_is_usable(struct acpi_madt_generic_interrupt *gicc)return gicc->flags &ACPI_MADT_ENABLED ; } -/* the following numa functions are architecture-dependent */ -void acpi_numa_slit_init (struct acpi_table_slit *slit); -#if defined(CONFIG_X86 ) || defined(CONFIG_LOONGARCH )void acpi_numa_processor_affinity_init (struct acpi_srat_cpu_affinity *pa);#else @@ -267,8 +264,6 @@ static inline void acpi_numa_gicc_affinity_init(struct acpi_srat_gicc_affinity *pa) { }#endif -int acpi_numa_memory_affinity_init (struct acpi_srat_mem_affinity *ma); -#ifndef PHYS_CPUID_INVALID typedef u32 phys_cpuid_t ;#define PHYS_CPUID_INVALID (phys_cpuid_t)(-1)
RE: [PATCH v3 3/5] ACPI/NUMA: Remove architecture dependent remainings
In reply to Robert RichterQuoted 8 lines · Robert Richter
With the removal of the Itanium architecture [1] the last architecture dependent functions:
acpi_numa_slit_init(),acpi_numa_memory_affinity_init()were removed. Remove its remainings in the header files too an make them static.
Quoted 7 lines
[1] commit
cf8e8658100d("arch: Remove Itanium (IA-64) architecture")Signed-off-by Robert Richter <[email protected]>--- drivers/acpi/numa/srat.c | 17 ++--------------- include/linux/acpi.h | 5 ----- 2 files changed, 2 insertions(+), 20 deletions(-)
Looks good,
RE: [PATCH v3 3/5] ACPI/NUMA: Remove architecture dependent remainings
In reply to Robert RichterQuoted 8 lines · Robert Richter
With the removal of the Itanium architecture [1] the last architecture dependent functions:
acpi_numa_slit_init(),acpi_numa_memory_affinity_init()were removed. Remove its remainings in the header files too an make them static.
Quoted 7 lines
[1] commit
cf8e8658100d("arch: Remove Itanium (IA-64) architecture")Signed-off-by Robert Richter <[email protected]>--- drivers/acpi/numa/srat.c | 17 ++--------------- include/linux/acpi.h | 5 ----- 2 files changed, 2 insertions(+), 20 deletions(-)
Looks good,
Re: [PATCH v3 3/5] ACPI/NUMA: Remove architecture dependent remainings
Quoted 17 lines · Dan Williams
Quoted 8 lines · Robert Richter
With the removal of the Itanium architecture [1] the last architecture dependent functions:
acpi_numa_slit_init(),acpi_numa_memory_affinity_init()were removed. Remove its remainings in the header files too an make them static.
Quoted 7 lines
[1] commit
cf8e8658100d("arch: Remove Itanium (IA-64) architecture")Signed-off-by Robert Richter <[email protected]>--- drivers/acpi/numa/srat.c | 17 ++--------------- include/linux/acpi.h | 5 ----- 2 files changed, 2 insertions(+), 20 deletions(-)
Quoted 3 lines
Looks good,
Reviewed-by Dan Williams <[email protected]>
I assume this is for 4/5?
Thanks for review.
-Robert
PATCH v3 4/5 ACPI/NUMA: Squash acpi_numa_slit_init() into acpi_parse_slit()
In reply to Robert RichterAfter removing architectural code the helper function acpi_numa_slit_init() is no longer needed. Squash it into acpi_parse_slit(). No functional changes intended.
--- drivers/acpi/numa/srat.c | 23 +++++++++-------------- 1 file changed, 9 insertions(+), 14 deletions(-)
drivers/acpi/numa/srat.c +9 -14
@@ -213,10 +213,16 @@ int __init srat_disabled(void)* I/O localities since SRAT does not list them. I/O localities are * not supported at this point. */ -static void __init acpi_numa_slit_init (struct acpi_table_slit *slit) +static int __init acpi_parse_slit (struct acpi_table_header *table) { +struct acpi_table_slit *slit = (struct acpi_table_slit *)table;int i, j; +if (!slit_valid (slit)) { +pr_info ("SLIT table looks invalid. Not used.\n" ); +return -EINVAL ; + } +for (i =0 ; i < slit->locality_count; i++) {const int from_node =pxm_to_node (i);
@@ -233,6 +239,8 @@ static void __init acpi_numa_slit_init(struct acpi_table_slit *slit) slit->entry[slit->locality_count * i + j]); } } + +return 0 ; } static int __init
@@ -452,19 +460,6 @@ static int __init acpi_parse_cfmws(union acpi_subtable_headers *header,return 0 ; } -static int __init acpi_parse_slit (struct acpi_table_header *table) -{ -struct acpi_table_slit *slit = (struct acpi_table_slit *)table; - -if (!slit_valid (slit)) { -pr_info ("SLIT table looks invalid. Not used.\n" ); -return -EINVAL ; - } -acpi_numa_slit_init (slit); - -return 0 ; -} -void __init __weak acpi_numa_x2apic_affinity_init (struct acpi_srat_x2apic_cpu_affinity *pa) {
Signature · 1 line
2.39.2
Re: [PATCH v3 4/5] ACPI/NUMA: Squash acpi_numa_slit_init() into acpi_parse_slit()
Quoted 5 lines · On Fri, 19 Apr 2024 16:02:02 +0200 Robert Richter <[email protected]> wrote:
After removing architectural code the helper function
acpi_numa_slit_init()is no longer needed. Squash it intoacpi_parse_slit(). No functional changes intended.Signed-off-by Robert Richter <[email protected]>
RE: [PATCH v3 4/5] ACPI/NUMA: Squash acpi_numa_slit_init() into acpi_parse_slit()
In reply to Robert RichterQuoted 8 lines · Robert Richter
After removing architectural code the helper function
acpi_numa_slit_init()is no longer needed. Squash it intoacpi_parse_slit(). No functional changes intended.Signed-off-by Robert Richter <[email protected]>--- drivers/acpi/numa/srat.c | 23 +++++++++-------------- 1 file changed, 9 insertions(+), 14 deletions(-)
Looks like I fumble fingered and replied to patch 3/5 twice. For this one as well:
PATCH v3 5/5 ACPI/NUMA: Squash acpi_numa_memory_affinity_init() into acpi_parse_memory_affinity()
In reply to Robert RichterAfter removing architectural code the helper function acpi_numa_memory_affinity_init() is no longer needed. Squash it into acpi_parse_memory_affinity(). No functional changes intended.
While at it, fixing checkpatch complaints in code moved.
--- drivers/acpi/numa/srat.c | 40 +++++++++++++++++----------------------- 1 file changed, 17 insertions(+), 23 deletions(-)
drivers/acpi/numa/srat.c +17 -23
@@ -243,22 +243,30 @@ static int __init acpi_parse_slit(struct acpi_table_header *table)return 0 ; } +static int parsed_numa_memblks__initdata ; +static int __init -acpi_numa_memory_affinity_init (struct acpi_srat_mem_affinity *ma) +acpi_parse_memory_affinity (union acpi_subtable_headers *header, +const unsigned long table_end) { +struct acpi_srat_mem_affinity *ma;u64 start, end;u32 hotpluggable;int node, pxm; + ma = (struct acpi_srat_mem_affinity *)header; + +acpi_table_print_srat_entry (&header->common); +if (srat_disabled ()) - goto out_err; +return 0 ;if (ma->header.length <sizeof (struct acpi_srat_mem_affinity )) {pr_err ("SRAT: Unexpected header length: %d\n" , ma->header.length); goto out_err_bad_srat; }if ((ma->flags &ACPI_SRAT_MEM_ENABLED ) ==0 ) - goto out_err; +return 0 ; hotpluggable =IS_ENABLED (CONFIG_MEMORY_HOTPLUG ) && (ma->flags &ACPI_SRAT_MEM_HOT_PLUGGABLE );
@@ -296,11 +304,15 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) max_possible_pfn =max (max_possible_pfn,PFN_UP (end -1 )); + parsed_numa_memblks++; +return 0 ; + out_err_bad_srat: +/* Just disable SRAT, but do not fail and ignore errors. */ bad_srat (); -out_err: -return -EINVAL ; + +return 0 ; } static int __init
@@ -549,24 +561,6 @@ acpi_parse_gi_affinity(union acpi_subtable_headers *header, }#endif /* defined(CONFIG_X86) || defined (CONFIG_ARM64) */ -static int __initdata parsed_numa_memblks; - -static int __init -acpi_parse_memory_affinity (union acpi_subtable_headers * header, -const unsigned long end) -{ -struct acpi_srat_mem_affinity *memory_affinity; - - memory_affinity = (struct acpi_srat_mem_affinity *)header; - -acpi_table_print_srat_entry (&header->common); - -/* let architecture-dependent part to do it */ -if (!acpi_numa_memory_affinity_init (memory_affinity)) - parsed_numa_memblks++; -return 0 ; -} -static int __init acpi_parse_srat (struct acpi_table_header *table) {struct acpi_table_srat *srat = (struct acpi_table_srat *)table;
Signature · 1 line
2.39.2
Re: [PATCH v3 5/5] ACPI/NUMA: Squash acpi_numa_memory_affinity_init() into acpi_parse_memory_affinity()
Quoted 9 lines · On Fri, 19 Apr 2024 16:02:03 +0200 Robert Richter <[email protected]> wrote:
After removing architectural code the helper function
acpi_numa_memory_affinity_init()is no longer needed. Squash it intoacpi_parse_memory_affinity(). No functional changes intended.While at it, fixing checkpatch complaints in code moved.
Reported-by kernel test robot <[email protected]>Signed-off-by Robert Richter <[email protected]>
RE: [PATCH v3 5/5] ACPI/NUMA: Squash acpi_numa_memory_affinity_init() into acpi_parse_memory_affinity()
In reply to Robert RichterQuoted 4 lines · Robert Richter
After removing architectural code the helper function
acpi_numa_memory_affinity_init()is no longer needed. Squash it intoacpi_parse_memory_affinity(). No functional changes intended.
Quoted 8 lines
While at it, fixing checkpatch complaints in code moved.
Reported-by kernel test robot <[email protected]>Signed-off-by Robert Richter <[email protected]>--- drivers/acpi/numa/srat.c | 40 +++++++++++++++++----------------------- 1 file changed, 17 insertions(+), 23 deletions(-)
Looks good,