board: sophgo: milkv_duo: Add ethernet support for Milk-V Duo board
Subsystems (3)
v2 cover board: sophgo: milkv_duo: Add ethernet support for Milk-V Duo board
This series add init code for cv1800b ethernet phy and enable ethernet support for Sophgo Milk-V Duo board.
In cv1800b, as the PHY register phy_id being initialized to 0, it is necessary to initialize the PHY before the ethernet driver initialization. Therefore, the initialization code is placed in the board_init function.
For the Linux kernel, due to the presence of a hibernation mechanism, whether the phy id will be reset to 0 after hibernation and how to reassign it thereafter remains an issue to consider. Once this issue is resolved, the Ethernet driver for the Milk-V Duo will be sent to the kernel.
Changes in v2:
- Change compatible
- Add clocks and interrupt properties.
Kongyang Liu (3):
board: milkv_duo: Add init code for Milk-V Duo ethernet
riscv: dts: sophgo: Add ethernet node
configs: milkv_duo: Add ethernet configs
arch/riscv/dts/cv1800b-milkv-duo.dts | 7 ++- arch/riscv/dts/cv18xx.dtsi | 23 ++++++++ board/sophgo/milkv_duo/Makefile | 3 +- board/sophgo/milkv_duo/board.c | 4 ++ board/sophgo/milkv_duo/ethernet.c | 79 ++++++++++++++++++++++++++++ board/sophgo/milkv_duo/ethernet.h | 11 ++++ configs/milkv_duo_defconfig | 4 ++ drivers/net/designware.c | 1 + 8 files changed, 130 insertions(+), 2 deletions(-) create mode 100644 board/sophgo/milkv_duo/ethernet.c create mode 100644 board/sophgo/milkv_duo/ethernet.h
Signature · 1 line
2.41.0
PATCH v2 1/3 board: milkv_duo: Add init code for Milk-V Duo ethernet
Initialize register in cv1800b ethernet phy to make it compatible with generic phy driver
---
(no changes since v1)
board/sophgo/milkv_duo/Makefile | 3 +- board/sophgo/milkv_duo/board.c | 4 ++ board/sophgo/milkv_duo/ethernet.c | 79 +++++++++++++++++++++++++++++++ board/sophgo/milkv_duo/ethernet.h | 11 +++++ drivers/net/designware.c | 1 + 5 files changed, 97 insertions(+), 1 deletion(-) create mode 100644 board/sophgo/milkv_duo/ethernet.c create mode 100644 board/sophgo/milkv_duo/ethernet.h
board/sophgo/milkv_duo/Makefile +2 -1
@@ -2,4 +2,5 @@ # # Copyright (c) 2024, Kongyang Liu <[email protected]> -obj-y := board.o +obj-y += board.o +obj-$(CONFIG_NET) += ethernet.o
board/sophgo/milkv_duo/board.c +4 -0
@@ -3,7 +3,11 @@* Copyright (c) 2024, Kongyang Liu <[email protected]> */ +#include "ethernet.h" +int board_init (void ) { +if (IS_ENABLED (CONFIG_NET )) +cv1800b_ephy_init ();return 0 ; }
board/sophgo/milkv_duo/ethernet.c new file +79 -0
79 lines not on this page · raw message
board/sophgo/milkv_duo/ethernet.h new file +11 -0
@@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright (c) 2024, Kongyang Liu <[email protected]> +*/ + +#ifndef __CV1800B_ETHERNET_H +#define __CV1800B_ETHERNET_H + +void cv1800b_ephy_init (void ); + +#endif
drivers/net/designware.c +1 -0
@@ -871,6 +871,7 @@ static const struct udevice_id designware_eth_ids[] = { { .compatible = "amlogic,meson6-dwmac" }, { .compatible = "st,stm32-dwmac" }, { .compatible = "snps,arc-dwmac-3.70a" }, + { .compatible = "sophgo,cv1800b-dwmac" }, { } };
Signature · 1 line
2.41.0
PATCH v2 2/3 riscv: dts: sophgo: Add ethernet node
In reply to Kongyang LiuAdd ethernet node for cv1800b SoC
---
Changes in v2:
- Change compatible
- Add clocks and interrupt properties.
arch/riscv/dts/cv1800b-milkv-duo.dts | 7 ++++++- arch/riscv/dts/cv18xx.dtsi | 23 +++++++++++++++++++++++ 2 files changed, 29 insertions(+), 1 deletion(-)
arch/riscv/dts/cv1800b-milkv-duo.dts +6 -1
@@ -29,6 +29,11 @@ }; }; +ðernet0 { + status = "okay"; + phy-mode = "rmii"; +}; + &osc { clock-frequency = <25000000>; };
@@ -39,7 +44,7 @@ no-1-8-v; no-mmc; no-sdio; -}; +} &uart0 { status = "okay";
arch/riscv/dts/cv18xx.dtsi +23 -0
@@ -50,6 +50,20 @@ clock-frequency = <375000000>; clock-output-names = "sdhci_clk"; #clock-cells = <0>; + } + + eth_csrclk: eth-csrclk { + compatible = "fixed-clock"; + clock-frequency = <250000000>; + clock-output-names = "eth_csrclk"; + #clock-cells = <0x0>; + }; + + eth_ptpclk: eth-ptpclk { + compatible = "fixed-clock"; + clock-frequency = <50000000>; + clock-output-names = "eth_ptpclk"; + #clock-cells = <0x0>; }; soc {
@@ -138,6 +152,15 @@ }; }; + ethernet0: ethernet@4070000 { + compatible = "sophgo,cv1800b-dwmac"; + reg = <0x04070000 0x10000>; + interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <ð_csrclk>, <ð_ptpclk>; + clock-names = "stmmaceth", "ptp_ref"; + status = "disabled"; + }; + uart0: serial@4140000 { compatible = "snps,dw-apb-uart"; reg = <0x04140000 0x100>;
Signature · 1 line
2.41.0
Re: [PATCH v2 2/3] riscv: dts: sophgo: Add ethernet node
Quoted 5 lines · Kongyang Liu
Add ethernet node for cv1800b SoC
Signed-off-by Kongyang Liu <[email protected]>---
Quoted 7 lines
Changes in v2:
- Change compatible
- Add clocks and interrupt properties.arch/riscv/dts/cv1800b-milkv-duo.dts | 7 ++++++- arch/riscv/dts/cv18xx.dtsi | 23 +++++++++++++++++++++++ 2 files changed, 29 insertions(+), 1 deletion(-)
PATCH v2 3/3 configs: milkv_duo: Add ethernet configs
In reply to Kongyang LiuAdd configs related to ethernet and ethernet boot command for Sophgo Milk-V Duo board
---
(no changes since v1)
configs/milkv_duo_defconfig | 4 ++++ 1 file changed, 4 insertions(+)
configs/milkv_duo_defconfig +4 -0
@@ -19,14 +19,18 @@ CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="milkv_duo# " CONFIG_CMD_MMC=y CONFIG_CMD_PART=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_PXE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_ENV_OVERWRITE=y +CONFIG_NET_RANDOM_ETHADDR=y CONFIG_MMC=y CONFIG_MMC_IO_VOLTAGE=y CONFIG_MMC_UHS_SUPPORT=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ADMA=y CONFIG_MMC_SDHCI_CV1800B=y +CONFIG_ETH_DESIGNWARE=y CONFIG_SYS_NS16550=y CONFIG_SYS_NS16550_MEM32=y
Signature · 1 line
2.41.0