Skip to contentSkip to conversation

Bluetooth: qca: fix NULL-deref on non-serdev setup

PATCH RESEND Applied Johan Hovold 3 participants 5 messages Apr 22, 2024

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

cover Bluetooth: qca: fix NULL-deref on non-serdev setup

Qualcomm Bluetooth controllers can be registered either from a serdev driver or from the Bluetooth line discipline. In the latter case, the HCI UART serdev pointer is NULL, something which the driver needs to handle without crashing.

This series fixes one such issue at setup() time which incidentally masked a similar crash at suspend. Fix this in two separate patches so that the latter issue is addressed in pre-6.2 stable kernels.

Johan

Johan Hovold (2):
Bluetooth: qca: fix NULL-deref on non-serdev suspend
Bluetooth: qca: fix NULL-deref on non-serdev setup

 drivers/bluetooth/hci_qca.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
Signature · 1 line
2.43.2
#1 lore raw

PATCH RESEND 1/2 Bluetooth: qca: fix NULL-deref on non-serdev suspend

Qualcomm ROME controllers can be registered from the Bluetooth line discipline and in this case the HCI UART serdev pointer is NULL.

Add the missing sanity check to prevent a NULL-pointer dereference when wakeup() is called for a non-serdev controller during suspend.

Just return true for now to restore the original behaviour and address the crash with pre-6.2 kernels, which do not have commit e9b3e5b8c657 ("Bluetooth: hci_qca: only assign wakeup with serial port support") that causes the crash to happen already at setup() time.

Fixes c1a74160eaf1 ("Bluetooth: hci_qca: Add device_may_wakeup support")
---
 drivers/bluetooth/hci_qca.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/bluetooth/hci_qca.c +3 -0
index 92fa20f5ac7d..94c85f4fbf3b 100644
@@ -1672,6 +1672,9 @@ static bool qca_wakeup(struct hci_dev *hdev)
 	struct hci_uart *hu = hci_get_drvdata(hdev);
 	bool wakeup;
 
+	if (!hu->serdev)
+		return true;
+
 	/* BT SoC attached through the serial bus is handled by the serdev driver.
 	 * So we need to use the device handle of the serdev driver to get the
 	 * status of device may wakeup.
Signature · 1 line
2.43.2
#2 lore raw

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=846689

---Test result---

Test Summary:

CheckPatch                    PASS      1.25 seconds
GitLint                       PASS      0.55 seconds
SubjectPrefix                 PASS      0.20 seconds
BuildKernel                   PASS      30.52 seconds
CheckAllWarning               PASS      33.41 seconds
CheckSparse                   PASS      39.05 seconds
CheckSmatch                   FAIL      35.60 seconds
BuildKernel32                 PASS      29.92 seconds
TestRunnerSetup               PASS      532.50 seconds
TestRunner_l2cap-tester       PASS      18.42 seconds
TestRunner_iso-tester         FAIL      31.55 seconds
TestRunner_bnep-tester        PASS      4.68 seconds
TestRunner_mgmt-tester        FAIL      112.15 seconds
TestRunner_rfcomm-tester      PASS      7.39 seconds
TestRunner_sco-tester         PASS      15.04 seconds
TestRunner_ioctl-tester       PASS      7.75 seconds
TestRunner_mesh-tester        PASS      5.84 seconds
TestRunner_smp-tester         PASS      6.80 seconds
TestRunner_userchan-tester    PASS      4.99 seconds
IncrementalBuild              PASS      33.50 seconds

Details
##############################
Test: CheckSmatch - FAIL
Desc: Run smatch tool with source
Output:

Segmentation fault (core dumped)
make[4]: *** [scripts/Makefile.build:244: net/bluetooth/hci_core.o] Error 139 make[4]: *** Deleting file 'net/bluetooth/hci_core.o'
make[3]: *** [scripts/Makefile.build:485: net/bluetooth] Error 2 make[2]: *** [scripts/Makefile.build:485: net] Error 2
make[2]: *** Waiting for unfinished jobs....
Segmentation fault (core dumped)
make[4]: *** [scripts/Makefile.build:244: drivers/bluetooth/bcm203x.o] Error 139 make[4]: *** Deleting file 'drivers/bluetooth/bcm203x.o'
make[4]: *** Waiting for unfinished jobs....
make[3]: *** [scripts/Makefile.build:485: drivers/bluetooth] Error 2 make[2]: *** [scripts/Makefile.build:485: drivers] Error 2
make[1]: *** [/github/workspace/src/src/Makefile:1919: .] Error 2
make: *** [Makefile:240: __sub-make] Error 2
##############################
Test: TestRunner_iso-tester - FAIL
Desc: Run iso-tester with test-runner
Output:
Total: 122, Passed: 121 (99.2%), Failed: 1, Not Run: 0

Failed Test Cases
ISO Connect2 Suspend - Success Failed 4.245 seconds
##############################
Test: TestRunner_mgmt-tester - FAIL
Desc: Run mgmt-tester with test-runner Output:
Total: 492, Passed: 489 (99.4%), Failed: 1, Not Run: 2

Failed Test Cases
LL Privacy - Add Device 7 (AL is full) Failed 0.195 seconds

---
Regards,
Linux Bluetooth

#3 lore raw

PATCH RESEND 2/2 Bluetooth: qca: fix NULL-deref on non-serdev setup

In reply to Johan Hovold

Qualcomm ROME controllers can be registered from the Bluetooth line discipline and in this case the HCI UART serdev pointer is NULL.

Add the missing sanity check to prevent a NULL-pointer dereference when setup() is called for a non-serdev controller.

Fixes e9b3e5b8c657 ("Bluetooth: hci_qca: only assign wakeup with serial port support")
Cc Zhengping Jiang <[email protected]>
---
 drivers/bluetooth/hci_qca.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/bluetooth/hci_qca.c +4 -2
index 94c85f4fbf3b..b621a0a40ea4 100644
@@ -1958,8 +1958,10 @@ static int qca_setup(struct hci_uart *hu)
 		qca_debugfs_init(hdev);
 		hu->hdev->hw_error = qca_hw_error;
 		hu->hdev->cmd_timeout = qca_cmd_timeout;
-		if (device_can_wakeup(hu->serdev->ctrl->dev.parent))
-			hu->hdev->wakeup = qca_wakeup;
+		if (hu->serdev) {
+			if (device_can_wakeup(hu->serdev->ctrl->dev.parent))
+				hu->hdev->wakeup = qca_wakeup;
+		}
 	} else if (ret == -ENOENT) {
 		/* No patch/nvm-config found, run with original fw/config */
 		set_bit(QCA_ROM_FW, &qca->flags);
Signature · 1 line
2.43.2
#4 lore raw
In reply to Johan Hovold
This series was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:

Hello:

This series was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:

Quoted 10 lines · On Mon, 22 Apr 2024 15:57:46 +0200 you wrote:

Qualcomm Bluetooth controllers can be registered either from a serdev driver or from the Bluetooth line discipline. In the latter case, the HCI UART serdev pointer is NULL, something which the driver needs to handle without crashing.

This series fixes one such issue at setup() time which incidentally masked a similar crash at suspend. Fix this in two separate patches so that the latter issue is addressed in pre-6.2 stable kernels.

[...]

Here is the summary with links:
- [RESEND,1/2] Bluetooth: qca: fix NULL-deref on non-serdev suspend

    https://git.kernel.org/bluetooth/bluetooth-next/c/8185331e953d
  - [RESEND,2/2] Bluetooth: qca: fix NULL-deref on non-serdev setup
    https://git.kernel.org/bluetooth/bluetooth-next/c/9201f29be2c9

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html