Skip to contentSkip to conversation

tools/power turbostat: Fix added raw MSR output

PATCH New Sasha Levin 1 participant 9 messages Apr 22, 2024

Subsystems (9)
lore
Share & tools
lore

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/9 tools/power turbostat: Fix added raw MSR output

From: Doug Smythies <[email protected]>

[ Upstream commit e5f4e68eed85fa8495d78cd966eecc2b27bb9e53 ]

When using --Summary mode, added MSRs in raw mode always print zeros. Print the actual register contents.

Example, with patch:

note the added column:
--add msr0x64f,u32,package,raw,REASON

Where:

0x64F is MSR_CORE_PERF_LIMIT_REASONS

Busy%   Bzy_MHz PkgTmp  PkgWatt CorWatt     REASON
0.00    4800    35      1.42    0.76    0x00000000
0.00    4801    34      1.42    0.76    0x00000000
80.08   4531    66      108.17  107.52  0x08000000
98.69   4530    66      133.21  132.54  0x08000000
99.28   4505    66      128.26  127.60  0x0c000400
99.65   4486    68      124.91  124.25  0x0c000400
99.63   4483    68      124.90  124.25  0x0c000400
79.34   4481    41      99.80   99.13   0x0c000000
0.00    4801    41      1.40    0.73    0x0c000000

Where, for the test processor (i5-10600K):

PKG Limit #1: 125.000 Watts, 8.000000 sec
MSR bit 26 = log; bit 10 = status

PKG Limit #2: 136.000 Watts, 0.002441 sec
MSR bit 27 = log; bit 11 = status

Example, without patch:

Busy%   Bzy_MHz PkgTmp  PkgWatt CorWatt     REASON
0.01    4800    35      1.43    0.77    0x00000000
0.00    4801    35      1.39    0.73    0x00000000
83.49   4531    66      112.71  112.06  0x00000000
98.69   4530    68      133.35  132.69  0x00000000
99.31   4500    67      127.96  127.30  0x00000000
99.63   4483    69      124.91  124.25  0x00000000
99.61   4481    69      124.90  124.25  0x00000000
99.61   4481    71      124.92  124.25  0x00000000
59.35   4479    42      75.03   74.37   0x00000000
0.00    4800    42      1.39    0.73    0x00000000
0.00    4801    42      1.42    0.76    0x00000000

c000000

[lenb: simplified patch to apply only to package scope]

---
 tools/power/x86/turbostat/turbostat.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
tools/power/x86/turbostat/turbostat.c +4 -3
index 9d4a249cc98bb..11f1b6288e123 100644
@@ -1685,9 +1685,10 @@ int sum_counters(struct thread_data *t, struct core_data *c,
 	average.packages.rapl_dram_perf_status += p->rapl_dram_perf_status;
 
 	for (i = 0, mp = sys.pp; mp; i++, mp = mp->next) {
-		if (mp->format == FORMAT_RAW)
-			continue;
-		average.packages.counter[i] += p->counter[i];
+		if ((mp->format == FORMAT_RAW) && (topo.num_packages == 0))
+			average.packages.counter[i] = p->counter[i];
+		else
+			average.packages.counter[i] += p->counter[i];
 	}
 	return 0;
 }
Signature · 1 line
2.43.0
author maintainer
#1 lore raw

PATCH 2/9 tools/power turbostat: Fix Bzy_MHz documentation typo

From: Peng Liu <[email protected]>

[ Upstream commit 0b13410b52c4636aacb6964a4253a797c0fa0d16 ]

The code calculates Bzy_MHz by multiplying TSC_delta * APERF_delta/MPERF_delta The man page erroneously showed that TSC_delta was divided.

---
 tools/power/x86/turbostat/turbostat.8 | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/power/x86/turbostat/turbostat.8 +1 -1
index 71e3f3a68b9df..f8cc88c56ae8f 100644
@@ -320,7 +320,7 @@ below the processor's base frequency.
 
 Busy% = MPERF_delta/TSC_delta
 
-Bzy_MHz = TSC_delta/APERF_delta/MPERF_delta/measurement_interval
+Bzy_MHz = TSC_delta*APERF_delta/MPERF_delta/measurement_interval
 
 Note that these calculations depend on TSC_delta, so they
 are not reliable during intervals when TSC_MHz is not running at the base frequency.
Signature · 1 line
2.43.0
author maintainer
#2 lore raw

PATCH 3/9 btrfs: make btrfs_clear_delalloc_extent() free delalloc reserve

In reply to Sasha Levin

From: Boris Burkov <[email protected]>

[ Upstream commit 3c6f0c5ecc8910d4ffb0dfe85609ebc0c91c8f34 ]

Currently, this call site in btrfs_clear_delalloc_extent() only converts the reservation. We are marking it not delalloc, so I don't think it makes sense to keep the rsv around. This is a path where we are not sure to join a transaction, so it leads to incorrect free-ing during umount.

Helps with the pass rate of generic/269 and generic/475.

---
 fs/btrfs/inode.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/btrfs/inode.c +1 -1
index 591caac2bf814..1f99d7dced17a 100644
@@ -2070,7 +2070,7 @@ void btrfs_clear_delalloc_extent(struct inode *vfs_inode,
 		 */
 		if (*bits & EXTENT_CLEAR_META_RESV &&
 		    root != fs_info->tree_root)
-			btrfs_delalloc_release_metadata(inode, len, false);
+			btrfs_delalloc_release_metadata(inode, len, true);
 
 		/* For sanity tests. */
 		if (btrfs_is_testing(fs_info))
Signature · 1 line
2.43.0
author maintainer
#3 lore raw

PATCH 4/9 btrfs: always clear PERTRANS metadata during commit

In reply to Sasha Levin

From: Boris Burkov <[email protected]>

[ Upstream commit 6e68de0bb0ed59e0554a0c15ede7308c47351e2d ]

It is possible to clear a root's IN_TRANS tag from the radix tree, but not clear its PERTRANS, if there is some error in between. Eliminate that possibility by moving the free up to where we clear the tag.

---
 fs/btrfs/transaction.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/btrfs/transaction.c +1 -1
index d23047b23005c..8cefe11c57dbc 100644
@@ -1343,6 +1343,7 @@ static noinline int commit_fs_roots(struct btrfs_trans_handle *trans)
 			radix_tree_tag_clear(&fs_info->fs_roots_radix,
 					(unsigned long)root->root_key.objectid,
 					BTRFS_ROOT_TRANS_TAG);
+			btrfs_qgroup_free_meta_all_pertrans(root);
 			spin_unlock(&fs_info->fs_roots_radix_lock);
 
 			btrfs_free_log(trans, root);
@@ -1367,7 +1368,6 @@ static noinline int commit_fs_roots(struct btrfs_trans_handle *trans)
 			if (ret2)
 				return ret2;
 			spin_lock(&fs_info->fs_roots_radix_lock);
-			btrfs_qgroup_free_meta_all_pertrans(root);
 		}
 	}
 	spin_unlock(&fs_info->fs_roots_radix_lock);
Signature · 1 line
2.43.0
author maintainer
#4 lore raw

PATCH 5/9 scsi: target: Fix SELinux error when systemd-modules loads the target module

In reply to Sasha Levin

From: Maurizio Lombardi <[email protected]>

[ Upstream commit 97a54ef596c3fd24ec2b227ba8aaf2cf5415e779 ]

If the systemd-modules service loads the target module, the credentials of that userspace process will be used to validate the access to the target db directory. SELinux will prevent it, reporting an error like the following:

kernel: audit: type=1400 audit(1676301082.205:4): avc: denied { read } for pid=1020 comm="systemd-modules" name="target" dev="dm-3" ino=4657583 scontext=system_u:system_r:systemd_modules_load_t:s0 tcontext=system_u:object_r:targetd_etc_rw_t:s0 tclass=dir permissive=0

Fix the error by using the kernel credentials to access the db directory

---
 drivers/target/target_core_configfs.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)
drivers/target/target_core_configfs.c +12 -0
index 56ae882fb7b39..4d2fbe1429b69 100644
@@ -3532,6 +3532,8 @@ static int __init target_core_init_configfs(void)
 {
 	struct configfs_subsystem *subsys = &target_core_fabrics;
 	struct t10_alua_lu_gp *lu_gp;
+	struct cred *kern_cred;
+	const struct cred *old_cred;
 	int ret;
 
 	pr_debug("TARGET_CORE[0]: Loading Generic Kernel Storage"
@@ -3608,11 +3610,21 @@ static int __init target_core_init_configfs(void)
 	if (ret < 0)
 		goto out;
 
+	/* We use the kernel credentials to access the target directory */
+	kern_cred = prepare_kernel_cred(&init_task);
+	if (!kern_cred) {
+		ret = -ENOMEM;
+		goto out;
+	}
+	old_cred = override_creds(kern_cred);
 	target_init_dbroot();
+	revert_creds(old_cred);
+	put_cred(kern_cred);
 
 	return 0;
 
 out:
+	target_xcopy_release_pt();
 	configfs_unregister_subsystem(subsys);
 	core_dev_release_virtual_lun0();
 	rd_module_exit();
Signature · 1 line
2.43.0
author maintainer
#5 lore raw

PATCH 6/9 blk-iocost: avoid out of bounds shift

In reply to Sasha Levin

From: Rik van Riel <[email protected]>

[ Upstream commit beaa51b36012fad5a4d3c18b88a617aea7a9b96d ]

UBSAN catches undefined behavior in blk-iocost, where sometimes iocg->delay is shifted right by a number that is too large, resulting in undefined behavior on some architectures.

[  186.556576] ------------[ cut here ]------------
UBSAN: shift-out-of-bounds in block/blk-iocost.c:1366:23
shift exponent 64 is too large for 64-bit type 'u64' (aka 'unsigned long long')
CPU: 16 PID: 0 Comm: swapper/16 Tainted: G S          E    N 6.9.0-0_fbk700_debug_rc2_kbuilder_0_gc85af715cac0 #1
Hardware name: Quanta Twin Lakes MP/Twin Lakes Passive MP, BIOS F09_3A23 12/08/2020
Call Trace:
 <IRQ>
 dump_stack_lvl+0x8f/0xe0
 __ubsan_handle_shift_out_of_bounds+0x22c/0x280
 iocg_kick_delay+0x30b/0x310
 ioc_timer_fn+0x2fb/0x1f80
 __run_timer_base+0x1b6/0x250

...

Avoid that undefined behavior by simply taking the "delay = 0" branch if the shift is too large.

I am not sure what the symptoms of an undefined value delay will be, but I suspect it could be more than a little annoying to debug.

---
 block/blk-iocost.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
block/blk-iocost.c +4 -3
index 63a8fb456b283..fe5b0c79e5411 100644
@@ -1290,7 +1290,7 @@ static bool iocg_kick_delay(struct ioc_gq *iocg, struct ioc_now *now)
 {
 	struct ioc *ioc = iocg->ioc;
 	struct blkcg_gq *blkg = iocg_to_blkg(iocg);
-	u64 tdelta, delay, new_delay;
+	u64 tdelta, delay, new_delay, shift;
 	s64 vover, vover_pct;
 	u32 hwa;
 
@@ -1305,8 +1305,9 @@ static bool iocg_kick_delay(struct ioc_gq *iocg, struct ioc_now *now)
 
 	/* calculate the current delay in effect - 1/2 every second */
 	tdelta = now->now - iocg->delay_at;
-	if (iocg->delay)
-		delay = iocg->delay >> div64_u64(tdelta, USEC_PER_SEC);
+	shift = div64_u64(tdelta, USEC_PER_SEC);
+	if (iocg->delay && shift < BITS_PER_LONG)
+		delay = iocg->delay >> shift;
 	else
 		delay = 0;
 
Signature · 1 line
2.43.0
author maintainer
#6 lore raw

PATCH 7/9 gpu: host1x: Do not setup DMA for virtual devices

In reply to Sasha Levin

From: Thierry Reding <[email protected]>

[ Upstream commit 8ab58f6841b19423231c5db3378691ec80c778f8 ]

The host1x devices are virtual compound devices and do not perform DMA accesses themselves, so they do not need to be set up for DMA.

Ideally we would also not need to set up DMA masks for the virtual devices, but we currently still need those for legacy support on old hardware.

---
 drivers/gpu/host1x/bus.c | 8 --------
 1 file changed, 8 deletions(-)
drivers/gpu/host1x/bus.c +0 -8
index 6e3b49d0de66d..b113c8e0acd02 100644
@@ -335,11 +335,6 @@ static int host1x_device_uevent(struct device *dev,
 	return 0;
 }
 
-static int host1x_dma_configure(struct device *dev)
-{
-	return of_dma_configure(dev, dev->of_node, true);
-}
-
 static const struct dev_pm_ops host1x_device_pm_ops = {
 	.suspend = pm_generic_suspend,
 	.resume = pm_generic_resume,
@@ -353,7 +348,6 @@ struct bus_type host1x_bus_type = {
 	.name = "host1x",
 	.match = host1x_device_match,
 	.uevent = host1x_device_uevent,
-	.dma_configure = host1x_dma_configure,
 	.pm = &host1x_device_pm_ops,
 };
 
@@ -442,8 +436,6 @@ static int host1x_device_add(struct host1x *host1x,
 	device->dev.bus = &host1x_bus_type;
 	device->dev.parent = host1x->dev;
 
-	of_dma_configure(&device->dev, host1x->dev->of_node, true);
-
 	device->dev.dma_parms = &device->dma_parms;
 	dma_set_max_seg_size(&device->dev, UINT_MAX);
 
Signature · 1 line
2.43.0
author maintainer
#7 lore raw

PATCH 8/9 MIPS: scall: Save thread_info.syscall unconditionally on entry

In reply to Sasha Levin

From: Jiaxun Yang <[email protected]>

[ Upstream commit 4370b673ccf240bf7587b0cb8e6726a5ccaf1f17 ]

thread_info.syscall is used by syscall_get_nr to supply syscall nr over a thread stack frame.

Previously, thread_info.syscall is only saved at syscall_trace_enter when syscall tracing is enabled. However rest of the kernel code do expect syscall_get_nr to be available without syscall tracing. The previous design breaks collect_syscall.

Move saving process to syscall entry to fix it.

---
 arch/mips/include/asm/ptrace.h |  2 +-
 arch/mips/kernel/asm-offsets.c |  1 +
 arch/mips/kernel/ptrace.c      | 15 ++++++---------
 arch/mips/kernel/scall32-o32.S | 23 +++++++++++++----------
 arch/mips/kernel/scall64-n32.S |  3 ++-
 arch/mips/kernel/scall64-n64.S |  3 ++-
 arch/mips/kernel/scall64-o32.S | 33 +++++++++++++++++----------------
 7 files changed, 42 insertions(+), 38 deletions(-)
arch/mips/include/asm/ptrace.h +1 -1
index 2849a9b65a055..ae578860f7295 100644
@@ -157,7 +157,7 @@ static inline long regs_return_value(struct pt_regs *regs)
 #define instruction_pointer(regs) ((regs)->cp0_epc)
 #define profile_pc(regs) instruction_pointer(regs)
 
-extern asmlinkage long syscall_trace_enter(struct pt_regs *regs, long syscall);
+extern asmlinkage long syscall_trace_enter(struct pt_regs *regs);
 extern asmlinkage void syscall_trace_leave(struct pt_regs *regs);
 
 extern void die(const char *, struct pt_regs *) __noreturn;
arch/mips/kernel/asm-offsets.c +1 -0
index aebfda81120a1..6c5269d3aacba 100644
@@ -100,6 +100,7 @@ void output_thread_info_defines(void)
 	OFFSET(TI_PRE_COUNT, thread_info, preempt_count);
 	OFFSET(TI_ADDR_LIMIT, thread_info, addr_limit);
 	OFFSET(TI_REGS, thread_info, regs);
+	OFFSET(TI_SYSCALL, thread_info, syscall);
 	DEFINE(_THREAD_SIZE, THREAD_SIZE);
 	DEFINE(_THREAD_MASK, THREAD_MASK);
 	DEFINE(_IRQ_STACK_SIZE, IRQ_STACK_SIZE);
arch/mips/kernel/ptrace.c +6 -9
index db7c5be1d4a35..dd454b429ff73 100644
@@ -1310,16 +1310,13 @@ long arch_ptrace(struct task_struct *child, long request,
  * Notification of system call entry/exit
  * - triggered by current->work.syscall_trace
  */
-asmlinkage long syscall_trace_enter(struct pt_regs *regs, long syscall)
+asmlinkage long syscall_trace_enter(struct pt_regs *regs)
 {
 	user_exit();
 
-	current_thread_info()->syscall = syscall;
-
 	if (test_thread_flag(TIF_SYSCALL_TRACE)) {
 		if (tracehook_report_syscall_entry(regs))
 			return -1;
-		syscall = current_thread_info()->syscall;
 	}
 
 #ifdef CONFIG_SECCOMP
@@ -1328,7 +1325,7 @@ asmlinkage long syscall_trace_enter(struct pt_regs *regs, long syscall)
 		struct seccomp_data sd;
 		unsigned long args[6];
 
-		sd.nr = syscall;
+		sd.nr = current_thread_info()->syscall;
 		sd.arch = syscall_get_arch(current);
 		syscall_get_arguments(current, regs, args);
 		for (i = 0; i < 6; i++)
@@ -1338,23 +1335,23 @@ asmlinkage long syscall_trace_enter(struct pt_regs *regs, long syscall)
 		ret = __secure_computing(&sd);
 		if (ret == -1)
 			return ret;
-		syscall = current_thread_info()->syscall;
 	}
 #endif
 
 	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
 		trace_sys_enter(regs, regs->regs[2]);
 
-	audit_syscall_entry(syscall, regs->regs[4], regs->regs[5],
+	audit_syscall_entry(current_thread_info()->syscall,
+			    regs->regs[4], regs->regs[5],
 			    regs->regs[6], regs->regs[7]);
 
 	/*
 	 * Negative syscall numbers are mistaken for rejected syscalls, but
 	 * won't have had the return value set appropriately, so we do so now.
 	 */
-	if (syscall < 0)
+	if (current_thread_info()->syscall < 0)
 		syscall_set_return_value(current, regs, -ENOSYS, 0);
-	return syscall;
+	return current_thread_info()->syscall;
 }
 
 /*
arch/mips/kernel/scall32-o32.S +13 -10
index b449b68662a9a..80747719a35ca 100644
@@ -80,6 +80,18 @@ loads_done:
 	PTR	load_a7, bad_stack_a7
 	.previous
 
+	/*
+	 * syscall number is in v0 unless we called syscall(__NR_###)
+	 * where the real syscall number is in a0
+	 */
+	subu	t2, v0,  __NR_O32_Linux
+	bnez	t2, 1f /* __NR_syscall at offset 0 */
+	LONG_S	a0, TI_SYSCALL($28)	# Save a0 as syscall number
+	b	2f
+1:
+	LONG_S	v0, TI_SYSCALL($28)	# Save v0 as syscall number
+2:
+
 	lw	t0, TI_FLAGS($28)	# syscall tracing enabled?
 	li	t1, _TIF_WORK_SYSCALL_ENTRY
 	and	t0, t1
@@ -117,16 +129,7 @@ syscall_trace_entry:
 	SAVE_STATIC
 	move	a0, sp
 
-	/*
-	 * syscall number is in v0 unless we called syscall(__NR_###)
-	 * where the real syscall number is in a0
-	 */
-	move	a1, v0
-	subu	t2, v0,  __NR_O32_Linux
-	bnez	t2, 1f /* __NR_syscall at offset 0 */
-	lw	a1, PT_R4(sp)
-
-1:	jal	syscall_trace_enter
+	jal	syscall_trace_enter
 
 	bltz	v0, 1f			# seccomp failed? Skip syscall
 
arch/mips/kernel/scall64-n32.S +2 -1
index 35d8c86b160ea..a8679e34c95e3 100644
@@ -44,6 +44,8 @@ NESTED(handle_sysn32, PT_SIZE, sp)
 
 	sd	a3, PT_R26(sp)		# save a3 for syscall restarting
 
+	LONG_S	v0, TI_SYSCALL($28)     # Store syscall number
+
 	li	t1, _TIF_WORK_SYSCALL_ENTRY
 	LONG_L	t0, TI_FLAGS($28)	# syscall tracing enabled?
 	and	t0, t1, t0
@@ -72,7 +74,6 @@ syscall_common:
 n32_syscall_trace_entry:
 	SAVE_STATIC
 	move	a0, sp
-	move	a1, v0
 	jal	syscall_trace_enter
 
 	bltz	v0, 1f			# seccomp failed? Skip syscall
arch/mips/kernel/scall64-n64.S +2 -1
index 23b2e2b1609cf..a3b5ab509b412 100644
@@ -47,6 +47,8 @@ NESTED(handle_sys64, PT_SIZE, sp)
 
 	sd	a3, PT_R26(sp)		# save a3 for syscall restarting
 
+	LONG_S	v0, TI_SYSCALL($28)     # Store syscall number
+
 	li	t1, _TIF_WORK_SYSCALL_ENTRY
 	LONG_L	t0, TI_FLAGS($28)	# syscall tracing enabled?
 	and	t0, t1, t0
@@ -83,7 +85,6 @@ n64_syscall_exit:
 syscall_trace_entry:
 	SAVE_STATIC
 	move	a0, sp
-	move	a1, v0
 	jal	syscall_trace_enter
 
 	bltz	v0, 1f			# seccomp failed? Skip syscall
arch/mips/kernel/scall64-o32.S +17 -16
index 50c9a57e0d3ad..6757368e9c940 100644
@@ -79,6 +79,22 @@ loads_done:
 	PTR	load_a7, bad_stack_a7
 	.previous
 
+	/*
+	 * absolute syscall number is in v0 unless we called syscall(__NR_###)
+	 * where the real syscall number is in a0
+	 * note: NR_syscall is the first O32 syscall but the macro is
+	 * only defined when compiling with -mabi=32 (CONFIG_32BIT)
+	 * therefore __NR_O32_Linux is used (4000)
+	 */
+
+	subu	t2, v0,  __NR_O32_Linux
+	bnez	t2, 1f /* __NR_syscall at offset 0 */
+	LONG_S	a0, TI_SYSCALL($28)	# Save a0 as syscall number
+	b	2f
+1:
+	LONG_S	v0, TI_SYSCALL($28)	# Save v0 as syscall number
+2:
+
 	li	t1, _TIF_WORK_SYSCALL_ENTRY
 	LONG_L	t0, TI_FLAGS($28)	# syscall tracing enabled?
 	and	t0, t1, t0
@@ -113,22 +129,7 @@ trace_a_syscall:
 	sd	a7, PT_R11(sp)		# For indirect syscalls
 
 	move	a0, sp
-	/*
-	 * absolute syscall number is in v0 unless we called syscall(__NR_###)
-	 * where the real syscall number is in a0
-	 * note: NR_syscall is the first O32 syscall but the macro is
-	 * only defined when compiling with -mabi=32 (CONFIG_32BIT)
-	 * therefore __NR_O32_Linux is used (4000)
-	 */
-	.set	push
-	.set	reorder
-	subu	t1, v0,  __NR_O32_Linux
-	move	a1, v0
-	bnez	t1, 1f /* __NR_syscall at offset 0 */
-	ld	a1, PT_R4(sp) /* Arg1 for __NR_syscall case */
-	.set	pop
-
-1:	jal	syscall_trace_enter
+	jal	syscall_trace_enter
 
 	bltz	v0, 1f			# seccomp failed? Skip syscall
 
Signature · 1 line
2.43.0
author maintainer
#8 lore raw

PATCH 9/9 selftests: timers: Fix valid-adjtimex signed left-shift undefined behavior

In reply to Sasha Levin

From: John Stultz <[email protected]>

[ Upstream commit 076361362122a6d8a4c45f172ced5576b2d4a50d ]

The struct adjtimex freq field takes a signed value who's units are in shifted (<<16) parts-per-million.

Unfortunately for negative adjustments, the straightforward use of:

freq = ppm << 16 trips undefined behavior warnings with clang:

valid-adjtimex.c:66:6: warning: shifting a negative signed value is undefined [-Wshift-negative-value]

        -499<<16,
        ~~~~^
valid-adjtimex.c:67:6: warning: shifting a negative signed value is undefined [-Wshift-negative-value]
        -450<<16,
        ~~~~^

..

Fix it by using a multiply by (1 << 16) instead of shifting negative values in the valid-adjtimex test case. Align the values for better readability.

---
 .../testing/selftests/timers/valid-adjtimex.c | 73 +++++++++----------
 1 file changed, 36 insertions(+), 37 deletions(-)
tools/testing/selftests/timers/valid-adjtimex.c +36 -37
index 48b9a803235a8..d13ebde203221 100644
@@ -21,9 +21,6 @@
  *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *   GNU General Public License for more details.
  */
-
-
-
 #include <stdio.h>
 #include <stdlib.h>
 #include <time.h>
@@ -62,45 +59,47 @@ int clear_time_state(void)
 #define NUM_FREQ_OUTOFRANGE 4
 #define NUM_FREQ_INVALID 2
 
+#define SHIFTED_PPM (1 << 16)
+
 long valid_freq[NUM_FREQ_VALID] = {
-	-499<<16,
-	-450<<16,
-	-400<<16,
-	-350<<16,
-	-300<<16,
-	-250<<16,
-	-200<<16,
-	-150<<16,
-	-100<<16,
-	-75<<16,
-	-50<<16,
-	-25<<16,
-	-10<<16,
-	-5<<16,
-	-1<<16,
+	 -499 * SHIFTED_PPM,
+	 -450 * SHIFTED_PPM,
+	 -400 * SHIFTED_PPM,
+	 -350 * SHIFTED_PPM,
+	 -300 * SHIFTED_PPM,
+	 -250 * SHIFTED_PPM,
+	 -200 * SHIFTED_PPM,
+	 -150 * SHIFTED_PPM,
+	 -100 * SHIFTED_PPM,
+	  -75 * SHIFTED_PPM,
+	  -50 * SHIFTED_PPM,
+	  -25 * SHIFTED_PPM,
+	  -10 * SHIFTED_PPM,
+	   -5 * SHIFTED_PPM,
+	   -1 * SHIFTED_PPM,
 	-1000,
-	1<<16,
-	5<<16,
-	10<<16,
-	25<<16,
-	50<<16,
-	75<<16,
-	100<<16,
-	150<<16,
-	200<<16,
-	250<<16,
-	300<<16,
-	350<<16,
-	400<<16,
-	450<<16,
-	499<<16,
+	    1 * SHIFTED_PPM,
+	    5 * SHIFTED_PPM,
+	   10 * SHIFTED_PPM,
+	   25 * SHIFTED_PPM,
+	   50 * SHIFTED_PPM,
+	   75 * SHIFTED_PPM,
+	  100 * SHIFTED_PPM,
+	  150 * SHIFTED_PPM,
+	  200 * SHIFTED_PPM,
+	  250 * SHIFTED_PPM,
+	  300 * SHIFTED_PPM,
+	  350 * SHIFTED_PPM,
+	  400 * SHIFTED_PPM,
+	  450 * SHIFTED_PPM,
+	  499 * SHIFTED_PPM,
 };
 
 long outofrange_freq[NUM_FREQ_OUTOFRANGE] = {
-	-1000<<16,
-	-550<<16,
-	550<<16,
-	1000<<16,
+	-1000 * SHIFTED_PPM,
+	 -550 * SHIFTED_PPM,
+	  550 * SHIFTED_PPM,
+	 1000 * SHIFTED_PPM,
 };
 
 #define LONG_MAX (~0UL>>1)
Signature · 1 line
2.43.0