Adding main esm Address range
Subsystems (2)
cover Adding main esm Address range
This series adds address range for main domain esm for J721S2 and J784S4 SOC.
Udit Kumar (2):
arm64: dts: ti: k3-j721s2: Add main esm address range
arm64: dts: ti: k3-j784s4: Add main esm address range
arch/arm64/boot/dts/ti/k3-j721s2.dtsi | 1 + arch/arm64/boot/dts/ti/k3-j784s4.dtsi | 1 + 2 files changed, 2 insertions(+)
Signature · 1 line
2.34.1
PATCH 1/2 arm64: dts: ti: k3-j721s2: Add main esm address range
Main ESM address change was missing for J721S2 SOC, So adding main ESM address mapping.
--- arch/arm64/boot/dts/ti/k3-j721s2.dtsi | 1 + 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/ti/k3-j721s2.dtsi +1 -0
@@ -117,6 +117,7 @@ cbass_main: bus@100000 { #size-cells = <2>; ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */ <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */ + <0x00 0x00700000 0x00 0x00700000 0x00 0x00001000>, /* ESM */ <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */ <0x00 0x0d800000 0x00 0x0d800000 0x00 0x00800000>, /* PCIe Core*/ <0x00 0x18000000 0x00 0x18000000 0x00 0x08000000>, /* PCIe1 DAT0 */
Signature · 1 line
2.34.1
PATCH 2/2 arm64: dts: ti: k3-j784s4: Add main esm address range
In reply to Udit KumarMain ESM address change was missing for J784S4 SOC, So adding main ESM address mapping.
--- arch/arm64/boot/dts/ti/k3-j784s4.dtsi | 1 + 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/ti/k3-j784s4.dtsi +1 -0
@@ -234,6 +234,7 @@ cbass_main: bus@100000 { #size-cells = <2>; ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */ <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */ + <0x00 0x00700000 0x00 0x00700000 0x00 0x00001000>, /* ESM */ <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */ <0x00 0x04210000 0x00 0x04210000 0x00 0x00010000>, /* VPU0 */ <0x00 0x04220000 0x00 0x04220000 0x00 0x00010000>, /* VPU1 */
Signature · 1 line
2.34.1
Hi Udit Kumar,
Quoted 8 lines · Udit Kumar
This series adds address range for main domain esm for J721S2 and J784S4 SOC.
Udit Kumar (2):
arm64: dts: ti: k3-j721s2: Add main esm address range
arm64: dts: ti: k3-j784s4: Add main esm address range[...]
I have applied the following to branch ti-k3-dts-next on [1]. Thank you!
[1/2] arm64: dts: ti: k3-j721s2: Add main esm address range
commit: db4d62037d90c6c8f70884651acb3b532c688e54
[2/2] arm64: dts: ti: k3-j784s4: Add main esm address range
commit: cc58233a29809aa841a29c2729a2786bc57abd9fAll being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent up the chain during the next merge window (or sooner if it is a relevant bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
Signature · 3 lines
Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D