conf: am57/am33/am43: Add/fix DEVICETREE_FILE
PATCH 1/1 conf: am57/am33/am43: Add/fix DEVICETREE_FILE
The new kernel directory stucture for the DTBs is causing problems when assembing the image files. It produces errors like this:
output: install: cannot stat 'deploy-ti/images/XXXX-evm/omap/XXXX.dtb': No such file or directory
or
output: install: cannot stat 'deploy-ti/images/XXXX-evm/ti/omap/XXXX.dtb': No such file or directory
The issue comes from the UBOOT_EXTLINUX_BOOT_FILES list. am57 already had a mechanism but it was missing the omap/ dir to remove, and am33 and am43 were just takeing KERNEL_DEVICETREE directly. This patch fixes both cases.
Signed-off-by Ryan Eatmon <[email protected]>
--- meta-ti-bsp/conf/machine/include/omap-a15.inc | 2 +- meta-ti-bsp/conf/machine/include/ti33x.inc | 4 +++- meta-ti-bsp/conf/machine/include/ti43x.inc | 4 +++- 3 files changed, 7 insertions(+), 3 deletions(-)
meta-ti-bsp/conf/machine/include/omap-a15.inc +1 -1
@@ -24,7 +24,7 @@ UBOOT_ARCH = "arm" UBOOT_ENTRYPOINT = "0x80008000" UBOOT_LOADADDRESS = "0x80008000" -DEVICETREE_FILE = "${@(d.getVar('KERNEL_DEVICETREE') or "").replace("ti/","")}" +DEVICETREE_FILE = "${@(d.getVar('KERNEL_DEVICETREE') or "").replace("ti/omap/","").replace("ti/","")}" # Generate an extlinux.conf file UBOOT_EXTLINUX = "1"
meta-ti-bsp/conf/machine/include/ti33x.inc +3 -1
@@ -44,6 +44,8 @@ UBOOT_MACHINE = "am335x_evm_config" UBOOT_ENTRYPOINT = "0x80008000" UBOOT_LOADADDRESS = "0x80008000" +DEVICETREE_FILE = "${@(d.getVar('KERNEL_DEVICETREE') or "").replace("ti/omap/","")}" + # Generate an extlinux.conf file UBOOT_EXTLINUX = "1" UBOOT_EXTLINUX_ROOT = "root=PARTUUID=${uuid}"
@@ -51,7 +53,7 @@ UBOOT_EXTLINUX_KERNEL_ARGS = "rootwait rw earlycon" UBOOT_EXTLINUX_BOOT_FILES = " \ extlinux.conf;extlinux/extlinux.conf \ ${KERNEL_IMAGETYPE} \ - ${KERNEL_DEVICETREE} \ + ${DEVICETREE_FILE} \ " SPL_BINARY = "MLO"
meta-ti-bsp/conf/machine/include/ti43x.inc +3 -1
@@ -41,13 +41,15 @@ UBOOT_MACHINE = "am43xx_evm_config" UBOOT_ENTRYPOINT = "0x80008000" UBOOT_LOADADDRESS = "0x80008000" +DEVICETREE_FILE = "${@(d.getVar('KERNEL_DEVICETREE') or "").replace("ti/omap/","")}" + # Generate an extlinux.conf file UBOOT_EXTLINUX = "1" UBOOT_EXTLINUX_ROOT = "root=PARTUUID=${uuid}" UBOOT_EXTLINUX_BOOT_FILES = " \ extlinux.conf;extlinux/extlinux.conf \ ${KERNEL_IMAGETYPE} \ - ${KERNEL_DEVICETREE} \ + ${DEVICETREE_FILE} \ " SPL_BINARY = "MLO"
Signature · 1 line
2.17.1