Skip to contentSkip to conversation

qmi: lte: Remove magic number use

PATCH Applied Denis Kenzior 2 participants 7 messages Apr 29, 2024 Kbuild

lore
Share & tools
lore
#0 lore raw

PATCH 1/6 qmi: lte: Remove magic number use

Several commands were invoked using magic numbers, even though they're defined inside wds.h. Remove magic numbers from enumerations by introducing appropriate enums to wds.h. Similarly, use defined constants for parameter and result ids.

---
 drivers/qmimodem/lte.c | 29 +++++++++++++++--------------
 drivers/qmimodem/wds.h | 14 +++++++++++++-
 2 files changed, 28 insertions(+), 15 deletions(-)
drivers/qmimodem/lte.c +15 -14
index 6c08c312b3cb..7633572b39ef 100644
@@ -73,24 +73,23 @@ static void qmimodem_lte_set_default_attach_info(const struct ofono_lte *lte,
 		uint8_t type;
 		uint8_t index;
 	} __attribute__((packed)) p = {
-		.type = 0, /* 3GPP */
+		.type = QMI_WDS_PROFILE_TYPE_3GPP,
+		.index = ldd->default_profile,
 	};
 
 	DBG("");
 
-	p.index = ldd->default_profile;
-
 	param = qmi_param_new();
 
 	/* Profile selector */
-	qmi_param_append(param, 0x01, sizeof(p), &p);
+	qmi_param_append(param, QMI_WDS_PARAM_PROFILE_TYPE, sizeof(p), &p);
 
 	/* WDS APN Name */
 	qmi_param_append(param, QMI_WDS_PARAM_APN,
 				strlen(info->apn), info->apn);
 
 	/* Modify profile */
-	if (qmi_service_send(ldd->wds, 0x28, param,
+	if (qmi_service_send(ldd->wds, QMI_WDS_MODIFY_PROFILE, param,
 					modify_profile_cb, cbd, l_free) > 0)
 		return;
 
@@ -114,6 +113,7 @@ static void reset_profile_cb(struct qmi_result *result, void *user_data)
 
 static void get_default_profile_cb(struct qmi_result *result, void *user_data)
 {
+	static const uint8_t RESULT_DEFAULT_PROFILE_NUMBER = 0x1;
 	struct ofono_lte *lte = user_data;
 	struct lte_data *ldd = ofono_lte_get_data(lte);
 	uint16_t error;
@@ -123,7 +123,7 @@ static void get_default_profile_cb(struct qmi_result *result, void *user_data)
 		uint8_t type;
 		uint8_t index;
 	} __attribute__((packed)) p = {
-		.type = 0, /* 3GPP */
+		.type = QMI_WDS_PROFILE_TYPE_3GPP,
 	};
 
 	DBG("");
@@ -134,7 +134,8 @@ static void get_default_profile_cb(struct qmi_result *result, void *user_data)
 	}
 
 	/* Profile index */
-	if (!qmi_result_get_uint8(result, 0x01, &index)) {
+	if (!qmi_result_get_uint8(result, RESULT_DEFAULT_PROFILE_NUMBER,
+								&index)) {
 		ofono_error("Failed query default profile");
 		goto error;
 	}
@@ -148,10 +149,10 @@ static void get_default_profile_cb(struct qmi_result *result, void *user_data)
 	param = qmi_param_new();
 
 	/* Profile selector */
-	qmi_param_append(param, 0x01, sizeof(p), &p);
+	qmi_param_append(param, QMI_WDS_PARAM_PROFILE_TYPE, sizeof(p), &p);
 
 	/* Reset profile */
-	if (qmi_service_send(ldd->wds, 0x4b, param,
+	if (qmi_service_send(ldd->wds, QMI_WDS_RESET_PROFILE, param,
 				reset_profile_cb, lte, NULL) > 0)
 		return;
 
@@ -171,8 +172,8 @@ static void create_wds_cb(struct qmi_service *service, void *user_data)
 		uint8_t type;
 		uint8_t family;
 	} __attribute((packed)) p = {
-		.type = 0,   /* 3GPP */
-		.family = 0, /* embedded */
+		.type = QMI_WDS_PROFILE_TYPE_3GPP,
+		.family = QMI_WDS_PROFILE_FAMILY_EMBEDDED,
 	};
 
 	DBG("");
@@ -189,11 +190,11 @@ static void create_wds_cb(struct qmi_service *service, void *user_data)
 	param = qmi_param_new();
 
 	/* Profile type */
-	qmi_param_append(param, 0x1, sizeof(p), &p);
+	qmi_param_append(param, QMI_WDS_PARAM_PROFILE_TYPE, sizeof(p), &p);
 
 	/* Get default profile */
-	if (qmi_service_send(ldd->wds, 0x49, param,
-				get_default_profile_cb, lte, NULL) > 0)
+	if (qmi_service_send(ldd->wds, QMI_WDS_GET_DEFAULT_PROFILE_NUMBER,
+				param, get_default_profile_cb, lte, NULL) > 0)
 		return;
 
 	qmi_param_free(param);
drivers/qmimodem/wds.h +13 -1
index 3c9b534c1f82..6d7071fe244f 100644
@@ -20,13 +20,13 @@
  */
 
 /* Start WDS network interface */
+#define QMI_WDS_PARAM_PROFILE_TYPE		0x01
 #define QMI_WDS_PARAM_APN			0x14	/* string */
 #define QMI_WDS_PARAM_IP_FAMILY			0x19	/* uint8 */
 #define QMI_WDS_PARAM_USERNAME			0x17	/* string */
 #define QMI_WDS_PARAM_PASSWORD			0x18	/* string */
 #define QMI_WDS_PARAM_AUTHENTICATION_PREFERENCE	0x16	/* uint8 */
 
-
 enum qmi_wds_authentication {
 	QMI_WDS_AUTHENTICATION_PAP	= 0x1,
 	QMI_WDS_AUTHENTICATION_CHAP	= 0x2,
@@ -57,6 +57,17 @@ enum qmi_wds_client_type {
 	QMI_WDS_CLIENT_TYPE_TETHERED = 0x01,
 };
 
+enum qmi_wds_profile_type {
+	QMI_WDS_PROFILE_TYPE_3GPP =	0x00,
+	QMI_WDS_PROFILE_TYPE_3GPP2 =	0x01,
+	QMI_WDS_PROFILE_TYPE_EPC =	0x02,
+};
+
+enum qmi_wds_profile_family {
+	QMI_WDS_PROFILE_FAMILY_EMBEDDED =	0x00,
+	QMI_WDS_PROFILE_FAMILY_TETHERED =	0x01,
+};
+
 enum qmi_wds_command {
 	QMI_WDS_RESET					= 0x00,
 	QMI_WDS_EVENT_REPORT				= 0x01,
@@ -83,6 +94,7 @@ enum qmi_wds_command {
 	QMI_WDS_GET_CURRENT_DATA_BEARER_TECHNOLOGY 	= 0x44,
 	QMI_WDS_GET_DEFAULT_PROFILE_NUMBER		= 0x49,
 	QMI_WDS_SET_DEFAULT_PROFILE_NUMBER		= 0x4A,
+	QMI_WDS_RESET_PROFILE				= 0x4B,
 	QMI_WDS_SET_IP_FAMILY				= 0x4D,
 	QMI_WDS_SET_AUTOCONNECT_SETTINGS		= 0x51,
 	QMI_WDS_GET_PDN_THROTTLE_INFO			= 0x6C,
Signature · 1 line
2.44.0
#1 lore raw

PATCH 2/6 qmi: wds: Move enum conversion into wds.c

Introduce a new wds.c file which will house various utilities, such as enumeration conversion, that could be shared between multiple QMI based atom drivers. Move ofono_gprs_auth_method conversion here.

---
 Makefile.am                     |  1 +
 drivers/qmimodem/gprs-context.c | 17 +----------------
 drivers/qmimodem/wds.c          | 25 +++++++++++++++++++++++++
 drivers/qmimodem/wds.h          |  2 ++
 4 files changed, 29 insertions(+), 16 deletions(-)
 create mode 100644 drivers/qmimodem/wds.c
Makefile.am +1 -0
index b5a32fac1c89..815d96904943 100644
@@ -362,6 +362,7 @@ qmi_sources = drivers/qmimodem/qmi.h drivers/qmimodem/qmi.c \
 					drivers/qmimodem/pds.h \
 					drivers/qmimodem/common.h \
 					drivers/qmimodem/wda.h \
+					drivers/qmimodem/wds.c \
 					drivers/qmimodem/voice.h
 
 builtin_sources += $(qmi_sources) \
drivers/qmimodem/gprs-context.c +1 -16
index 4004876bab87..9ac57c893725 100644
@@ -239,21 +239,6 @@ static void qmi_gprs_read_settings(struct ofono_gprs_context* gc,
 	l_free(cbd);
 }
 
-static uint8_t auth_method_to_qmi_auth(enum ofono_gprs_auth_method method)
-{
-	/* QMI uses a bitmap */
-	switch (method) {
-	case OFONO_GPRS_AUTH_METHOD_CHAP:
-		return QMI_WDS_AUTHENTICATION_CHAP;
-	case OFONO_GPRS_AUTH_METHOD_PAP:
-		return QMI_WDS_AUTHENTICATION_PAP;
-	case OFONO_GPRS_AUTH_METHOD_NONE:
-		return 0;
-	}
-
-	return 0;
-}
-
 static void qmi_activate_primary(struct ofono_gprs_context *gc,
 				const struct ofono_gprs_primary_context *ctx,
 				ofono_gprs_context_cb_t cb, void *user_data)
@@ -288,7 +273,7 @@ static void qmi_activate_primary(struct ofono_gprs_context *gc,
 
 	qmi_param_append_uint8(param, QMI_WDS_PARAM_IP_FAMILY, ip_family);
 
-	auth = auth_method_to_qmi_auth(ctx->auth_method);
+	auth = qmi_wds_auth_from_ofono(ctx->auth_method);
 
 	qmi_param_append_uint8(param, QMI_WDS_PARAM_AUTHENTICATION_PREFERENCE,
 					auth);
drivers/qmimodem/wds.c new file +25 -0
new file mode 100644
index 000000000000..748ad867c2cc
@@ -0,0 +1,25 @@
+/*
+ * oFono - Open Source Telephony
+ * Copyright (C) 2024  Cruise, LLC
+ *
+ * SPDX-License-Identifier: LGPL-2.1-or-later
+ */
+
+#include "src/common.h"
+
+#include "wds.h"
+
+int qmi_wds_auth_from_ofono(enum ofono_gprs_auth_method method)
+{
+	/* QMI uses a bitmap */
+	switch (method) {
+	case OFONO_GPRS_AUTH_METHOD_CHAP:
+		return QMI_WDS_AUTHENTICATION_CHAP;
+	case OFONO_GPRS_AUTH_METHOD_PAP:
+		return QMI_WDS_AUTHENTICATION_PAP;
+	case OFONO_GPRS_AUTH_METHOD_NONE:
+		return 0;
+	}
+
+	return -ENOENT;
+}
drivers/qmimodem/wds.h +2 -0
index 6d7071fe244f..c8aeefe430bb 100644
@@ -108,3 +108,5 @@ enum qmi_wds_command {
 	QMI_WDS_CONFIGURE_PROFILE_EVENT_LIST		= 0xA7,
 	QMI_WDS_PROFILE_CHANGED				= 0xA8,
 };
+
+int qmi_wds_auth_from_ofono(enum ofono_gprs_auth_method method);
Signature · 1 line
2.44.0
#2 lore raw

PATCH 3/6 qmi: lte: Support additional attributes

In reply to Denis Kenzior

Add support for setting APN Type (IPV4, IPV6 or Dual), Username and Password attributes of the profile used for the default bearer.

---
 drivers/qmimodem/lte.c | 21 +++++++++++++++++----
 drivers/qmimodem/wds.c | 14 ++++++++++++++
 drivers/qmimodem/wds.h |  1 +
 3 files changed, 32 insertions(+), 4 deletions(-)
drivers/qmimodem/lte.c +17 -4
index 7633572b39ef..70efaf04c8f5 100644
@@ -66,6 +66,10 @@ static void qmimodem_lte_set_default_attach_info(const struct ofono_lte *lte,
 			const struct ofono_lte_default_attach_info *info,
 			ofono_lte_cb_t cb, void *data)
 {
+	static const uint8_t PARAM_PDP_TYPE = 0x11;
+	static const uint8_t PARAM_USERNAME = 0x1B;
+	static const uint8_t PARAM_PASSWORD = 0x1C;
+	static const uint8_t PARAM_AUTHENTICATION_PREFERENCE = 0x1D;
 	struct lte_data *ldd = ofono_lte_get_data(lte);
 	struct cb_data *cbd = cb_data_new(cb, data);
 	struct qmi_param* param;
@@ -76,19 +80,28 @@ static void qmimodem_lte_set_default_attach_info(const struct ofono_lte *lte,
 		.type = QMI_WDS_PROFILE_TYPE_3GPP,
 		.index = ldd->default_profile,
 	};
+	uint8_t auth = qmi_wds_auth_from_ofono(info->auth_method);
 
 	DBG("");
 
 	param = qmi_param_new();
 
-	/* Profile selector */
 	qmi_param_append(param, QMI_WDS_PARAM_PROFILE_TYPE, sizeof(p), &p);
-
-	/* WDS APN Name */
+	qmi_param_append_uint8(param, PARAM_PDP_TYPE,
+				qmi_wds_pdp_type_from_ofono(info->proto));
 	qmi_param_append(param, QMI_WDS_PARAM_APN,
 				strlen(info->apn), info->apn);
 
-	/* Modify profile */
+	qmi_param_append_uint8(param, PARAM_AUTHENTICATION_PREFERENCE, auth);
+
+	if (auth && info->username[0])
+		qmi_param_append(param, PARAM_USERNAME,
+					strlen(info->username), info->username);
+
+	if (auth && info->password[0])
+		qmi_param_append(param, PARAM_PASSWORD,
+					strlen(info->password), info->password);
+
 	if (qmi_service_send(ldd->wds, QMI_WDS_MODIFY_PROFILE, param,
 					modify_profile_cb, cbd, l_free) > 0)
 		return;
drivers/qmimodem/wds.c +14 -0
index 748ad867c2cc..d126f4712921 100644
@@ -23,3 +23,17 @@ int qmi_wds_auth_from_ofono(enum ofono_gprs_auth_method method)
 
 	return -ENOENT;
 }
+
+int qmi_wds_pdp_type_from_ofono(enum ofono_gprs_proto proto)
+{
+	switch (proto) {
+	case OFONO_GPRS_PROTO_IP:
+		return QMI_WDS_PDP_TYPE_IPV4;
+	case OFONO_GPRS_PROTO_IPV6:
+		return QMI_WDS_PDP_TYPE_IPV6;
+	case OFONO_GPRS_PROTO_IPV4V6:
+		return QMI_WDS_PDP_TYPE_IPV4V6;
+	}
+
+	return -ENOENT;
+}
drivers/qmimodem/wds.h +1 -0
index c8aeefe430bb..d896fd8cc535 100644
@@ -110,3 +110,4 @@ enum qmi_wds_command {
 };
 
 int qmi_wds_auth_from_ofono(enum ofono_gprs_auth_method method);
+int qmi_wds_pdp_type_from_ofono(enum ofono_gprs_proto proto);
Signature · 1 line
2.44.0
#3 lore raw

PATCH 4/6 qmi: gprs: Query default profile number at init

In reply to Denis Kenzior

The current logic queries the default profile id every time the driver believes the default bearer has been attached. However, oFono does not modify the default profile number during its runtime. Query the default profile id at initialization time instead.

While here, remove some magic numbers in favor of defined constants.

---
 drivers/qmimodem/gprs.c | 136 ++++++++++++++++++----------------------
 1 file changed, 61 insertions(+), 75 deletions(-)
drivers/qmimodem/gprs.c +61 -75
index 72509d433bc6..738271905848 100644
@@ -38,7 +38,7 @@ struct gprs_data {
 	struct qmi_device *dev;
 	struct qmi_service *nas;
 	struct qmi_service *wds;
-	unsigned int last_auto_context_id;
+	unsigned int default_profile;
 	uint16_t serving_system_indication_id;
 };
 
@@ -116,46 +116,12 @@ static void get_lte_attach_param_cb(struct qmi_result *result, void *user_data)
 	if (qmi_result_get_uint8(result, 0x11, &iptype))
 		ofono_info("LTE attach IP type: %hhd", iptype);
 
-	ofono_gprs_cid_activated(gprs, data->last_auto_context_id, apn);
+	ofono_gprs_cid_activated(gprs, data->default_profile, apn);
 	l_free(apn);
 
 	return;
 
 noapn:
-	data->last_auto_context_id = 0;
-	ofono_error("LTE bearer established but APN not set");
-}
-
-static void get_default_profile_cb(struct qmi_result *result, void *user_data)
-{
-	struct ofono_gprs* gprs = user_data;
-	struct gprs_data *data = ofono_gprs_get_data(gprs);
-	uint16_t error;
-	uint8_t index;
-
-	DBG("");
-
-	if (qmi_result_set_error(result, &error)) {
-		ofono_error("Get default profile error: %hd", error);
-		goto error;
-	}
-
-	/* Profile index */
-	if (!qmi_result_get_uint8(result, 0x01, &index)) {
-		ofono_error("Failed query default profile");
-		goto error;
-	}
-
-	DBG("Default profile index: %hhd", index);
-
-	data->last_auto_context_id = index;
-
-	if (qmi_service_send(data->wds, QMI_WDS_GET_LTE_ATTACH_PARAMETERS,
-				NULL, get_lte_attach_param_cb, gprs, NULL) > 0)
-		return;
-
-error:
-	data->last_auto_context_id = 0;
 	ofono_error("LTE bearer established but APN not set");
 }
 
@@ -167,41 +133,16 @@ error:
 static void get_lte_attach_params(struct ofono_gprs* gprs)
 {
 	struct gprs_data *data = ofono_gprs_get_data(gprs);
-	struct {
-		uint8_t type;
-		uint8_t family;
-	} __attribute((packed)) p = {
-		.type = 0,   /* 3GPP */
-		.family = 0, /* embedded */
-	};
-	struct qmi_param *param;
 
 	DBG("");
 
-	if (data->last_auto_context_id != 0)
-		return; /* Established or in progress */
-
-	/* Set query in progress */
-	data->last_auto_context_id = -1;
-
-	/* First we query the default profile in order to find out which
-	 * context the modem has activated.
-	 */
-	param = qmi_param_new();
-
-	/* Profile type */
-	qmi_param_append(param, 0x1, sizeof(p), &p);
-
-	if (qmi_service_send(data->wds, QMI_WDS_GET_DEFAULT_PROFILE_NUMBER,
-				param, get_default_profile_cb, gprs, NULL) > 0)
+	if (qmi_service_send(data->wds, QMI_WDS_GET_LTE_ATTACH_PARAMETERS,
+				NULL, get_lte_attach_param_cb, gprs, NULL) > 0)
 		return;
-
-	qmi_param_free(param);
 }
 
 static int handle_ss_info(struct qmi_result *result, struct ofono_gprs *gprs)
 {
-	struct gprs_data *data = ofono_gprs_get_data(gprs);
 	int status;
 	int tech;
 	int bearer_tech;
@@ -222,8 +163,6 @@ static int handle_ss_info(struct qmi_result *result, struct ofono_gprs *gprs)
 			 */
 			get_lte_attach_params(gprs);
 		}
-	} else {
-		data->last_auto_context_id = 0;
 	}
 
 	/* DC is optional so only notify on successful extraction */
@@ -337,20 +276,29 @@ static void qmi_attached_status(struct ofono_gprs *gprs,
 	l_free(cbd);
 }
 
-static void create_wds_cb(struct qmi_service *service, void *user_data)
+static void get_default_profile_cb(struct qmi_result *result, void *user_data)
 {
+	static const uint8_t RESULT_DEFAULT_PROFILE_NUMBER = 0x1;
 	struct ofono_gprs *gprs = user_data;
 	struct gprs_data *data = ofono_gprs_get_data(gprs);
+	uint16_t error;
+	uint8_t index;
 
-	DBG("");
+	if (qmi_result_set_error(result, &error)) {
+		ofono_error("Get default profile error: %hd", error);
+		goto error;
+	}
 
-	if (!service) {
-		ofono_error("Failed to request WDS service");
-		ofono_gprs_remove(gprs);
-		return;
+	/* Profile index */
+	if (!qmi_result_get_uint8(result, RESULT_DEFAULT_PROFILE_NUMBER,
+								&index)) {
+		ofono_error("Failed query default profile");
+		goto error;
 	}
 
-	data->wds = service;
+	DBG("Default profile index: %hhd", index);
+	data->default_profile = index;
+	ofono_gprs_set_cid_range(gprs, index, index);
 
 	/*
 	 * First get the SS info - the modem may already be connected,
@@ -358,15 +306,53 @@ static void create_wds_cb(struct qmi_service *service, void *user_data)
 	 */
 	qmi_service_send(data->nas, QMI_NAS_GET_SERVING_SYSTEM, NULL,
 					ss_info_notify, gprs, NULL);
-
 	data->serving_system_indication_id =
 		qmi_service_register(data->nas,
 					QMI_NAS_SERVING_SYSTEM_INDICATION,
 					ss_info_notify, gprs, NULL);
 
-	ofono_gprs_set_cid_range(gprs, 1, 1);
-
 	ofono_gprs_register(gprs);
+	return;
+error:
+	ofono_gprs_remove(gprs);
+}
+
+static void create_wds_cb(struct qmi_service *service, void *user_data)
+{
+	struct ofono_gprs *gprs = user_data;
+	struct gprs_data *data = ofono_gprs_get_data(gprs);
+	struct {
+		uint8_t type;
+		uint8_t family;
+	} __attribute((packed)) p = {
+		.type = QMI_WDS_PROFILE_TYPE_3GPP,
+		.family = QMI_WDS_PROFILE_FAMILY_EMBEDDED,
+	};
+	struct qmi_param *param;
+
+	DBG("");
+
+	if (!service) {
+		ofono_error("Failed to request WDS service");
+		goto error;
+	}
+
+	data->wds = service;
+
+	/*
+	 * Query the default profile.  We never change the default profile
+	 * number, so querying it once should be sufficient
+	 */
+	param = qmi_param_new();
+	qmi_param_append(param, QMI_WDS_PARAM_PROFILE_TYPE, sizeof(p), &p);
+
+	if (qmi_service_send(data->wds, QMI_WDS_GET_DEFAULT_PROFILE_NUMBER,
+				param, get_default_profile_cb, gprs, NULL) > 0)
+		return;
+
+	qmi_param_free(param);
+error:
+	ofono_gprs_remove(gprs);
 }
 
 static void create_nas_cb(struct qmi_service *service, void *user_data)
Signature · 1 line
2.44.0
#4 lore raw

PATCH 5/6 udevng: Add "option" module managed ports to gobi driver

In reply to Denis Kenzior

This makes sure that any tty ports that are managed / created by the "option" module can still be utilized by the gobi driver.

---
 plugins/udevng.c | 1 +
 1 file changed, 1 insertion(+)
plugins/udevng.c +1 -0
index 14ae2f392da4..1aa9f2e4b4b0 100644
@@ -2014,6 +2014,7 @@ static struct {
 	{ "hso",	"hso"				},
 	{ "gobi",	"qmi_wwan"			},
 	{ "gobi",	"qcserial"			},
+	{ "gobi",	"option"			},
 	{ "sierra",	"qmi_wwan",	"1199"		},
 	{ "sierra",	"qcserial",	"1199"		},
 	{ "sierra",	"sierra"			},
Signature · 1 line
2.44.0
#5 lore raw

PATCH 6/6 udevng: Support Quectel RM502Q

In reply to Denis Kenzior
[37312.033140] usb 4-1: New USB device found, idVendor=2c7c, idProduct=0800, bcdDevice= 4.14
[37312.033149] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[37312.033151] usb 4-1: Product: RM502Q-AE
[37312.033153] usb 4-1: Manufacturer: Quectel
---
 plugins/udevng.c | 3 +++
 1 file changed, 3 insertions(+)
plugins/udevng.c +3 -0
index 1aa9f2e4b4b0..b9d115f16b7d 100644
@@ -2053,6 +2053,9 @@ static struct {
 	{ "quectelqmi",	"qcserial",	"2c7c", "0195"	},
 	{ "quectelqmi",	"qmi_wwan",	"2c7c", "0296"	},
 	{ "quectelqmi",	"qcserial",	"2c7c", "0296"	},
+	{ "quectelqmi", "qmi_wwan",	"2c7c", "0800"	},
+	{ "quectelqmi", "qcserial",	"2c7c", "0800"	},
+	{ "quectelqmi", "option",	"2c7c", "0800"	},
 	{ "quectelqmi", "qmi_wwan_q",	"2c7c", "0452"	},
 	{ "ublox",	"cdc_acm",	"1546", "1010"	},
 	{ "ublox",	"cdc_ncm",	"1546", "1010"	},
Signature · 1 line
2.44.0
#6 lore raw
In reply to Denis Kenzior
This series was applied to ofono.git (master) by Denis Kenzior <[email protected]>:

Hello:

This series was applied to ofono.git (master)
by Denis Kenzior <[email protected]>:

Quoted 8 lines · On Mon, 29 Apr 2024 10:56:53 -0500 you wrote:

Several commands were invoked using magic numbers, even though they're defined inside wds.h. Remove magic numbers from enumerations by introducing appropriate enums to wds.h. Similarly, use defined constants for parameter and result ids.

---
 drivers/qmimodem/lte.c | 29 +++++++++++++++--------------
 drivers/qmimodem/wds.h | 14 +++++++++++++-
 2 files changed, 28 insertions(+), 15 deletions(-)

Here is the summary with links:
- [1/6] qmi: lte: Remove magic number use

    https://git.kernel.org/pub/scm/network/ofono/ofono.git/?id=758a6ea7faed
  - [2/6] qmi: wds: Move enum conversion into wds.c
    https://git.kernel.org/pub/scm/network/ofono/ofono.git/?id=e1756a883d8a
  - [3/6] qmi: lte: Support additional attributes
    https://git.kernel.org/pub/scm/network/ofono/ofono.git/?id=901835d0f265
  - [4/6] qmi: gprs: Query default profile number at init
    https://git.kernel.org/pub/scm/network/ofono/ofono.git/?id=63a6b34de475
  - [5/6] udevng: Add "option" module managed ports to gobi driver
    https://git.kernel.org/pub/scm/network/ofono/ofono.git/?id=cb4f0876de81
  - [6/6] udevng: Support Quectel RM502Q
    https://git.kernel.org/pub/scm/network/ofono/ofono.git/?id=8254e8ff1553

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html