Skip to contentSkip to conversation

platform/x86: ISST: Support SST-BF and SST-TF per level

PATCH In review Srinivas Pandruvada 2 participants 2 messages Apr 30, 2024 – May 1, 2024

Subsystems (2)
lore
Share & tools
lore

Srinivas Pandruvada

author maintainer
#0 lore raw

PATCH 1/1 platform/x86: ISST: Support SST-BF and SST-TF per level

SST SST-BF and SST-TF can be enabled/disabled per SST-PP level. So return a mask of all levels, where the feature is supported, instead of just for level 0.

Since the return value returns all levels mask, not just level 0, update API version.

---
 .../intel/speed_select_if/isst_tpmi_core.c    | 38 +++++++++++++++----
 1 file changed, 31 insertions(+), 7 deletions(-)
drivers/platform/x86/intel/speed_select_if/isst_tpmi_core.c +31 -7
index 6bcbb97b0101..7bac7841ff0a 100644
@@ -847,6 +847,8 @@ static int isst_if_get_perf_level(void __user *argp)
 {
 	struct isst_perf_level_info perf_level;
 	struct tpmi_per_power_domain_info *power_domain_info;
+	unsigned long level_mask;
+	u8 level, support;
 
 	if (copy_from_user(&perf_level, argp, sizeof(perf_level)))
 		return -EFAULT;
@@ -866,12 +868,34 @@ static int isst_if_get_perf_level(void __user *argp)
 		      SST_PP_FEATURE_STATE_START, SST_PP_FEATURE_STATE_WIDTH, SST_MUL_FACTOR_NONE)
 	perf_level.enabled = !!(power_domain_info->sst_header.cap_mask & BIT(1));
 
-	_read_bf_level_info("bf_support", perf_level.sst_bf_support, 0, 0,
-			    SST_BF_FEATURE_SUPPORTED_START, SST_BF_FEATURE_SUPPORTED_WIDTH,
-			    SST_MUL_FACTOR_NONE);
-	_read_tf_level_info("tf_support", perf_level.sst_tf_support, 0, 0,
-			    SST_TF_FEATURE_SUPPORTED_START, SST_TF_FEATURE_SUPPORTED_WIDTH,
-			    SST_MUL_FACTOR_NONE);
+	level_mask = perf_level.level_mask;
+	perf_level.sst_bf_support = 0;
+	for_each_set_bit(level, &level_mask, BITS_PER_BYTE) {
+		/*
+		 * Read BF support for a level. Read output is updated
+		 * to "support" variable by the below macro.
+		 */
+		_read_bf_level_info("bf_support", support, level, 0, SST_BF_FEATURE_SUPPORTED_START,
+				    SST_BF_FEATURE_SUPPORTED_WIDTH, SST_MUL_FACTOR_NONE);
+
+		/* If supported set the bit for the level */
+		if (support)
+			perf_level.sst_bf_support |= BIT(level);
+	}
+
+	perf_level.sst_tf_support = 0;
+	for_each_set_bit(level, &level_mask, BITS_PER_BYTE) {
+		/*
+		 * Read TF support for a level. Read output is updated
+		 * to "support" variable by the below macro.
+		 */
+		_read_tf_level_info("tf_support", support, level, 0, SST_TF_FEATURE_SUPPORTED_START,
+				    SST_TF_FEATURE_SUPPORTED_WIDTH, SST_MUL_FACTOR_NONE);
+
+		/* If supported set the bit for the level */
+		if (support)
+			perf_level.sst_tf_support |= BIT(level);
+	}
 
 	if (copy_to_user(argp, &perf_level, sizeof(perf_level)))
 		return -EFAULT;
@@ -1648,7 +1672,7 @@ void tpmi_sst_dev_resume(struct auxiliary_device *auxdev)
 }
 EXPORT_SYMBOL_NS_GPL(tpmi_sst_dev_resume, INTEL_TPMI_SST);
 
-#define ISST_TPMI_API_VERSION	0x02
+#define ISST_TPMI_API_VERSION	0x03
 
 int tpmi_sst_init(void)
 {
Signature · 1 line
2.44.0
#1 lore raw

Hi,

Quoted 9 lines · Srinivas Pandruvada

SST SST-BF and SST-TF can be enabled/disabled per SST-PP level. So return a mask of all levels, where the feature is supported, instead of just for level 0.

Since the return value returns all levels mask, not just level 0, update API version.

Thank you for your patch, I've applied this patch to my review-hans branch:
https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=review-hans

Once I've run some tests on this branch the patches there will be added to the platform-drivers-x86/for-next branch and eventually will be included in the pdx86 pull-request to Linus for the next merge-window.

Regards,

Hans

Quoted 67 lines
---
 .../intel/speed_select_if/isst_tpmi_core.c    | 38 +++++++++++++++----
 1 file changed, 31 insertions(+), 7 deletions(-)
drivers/platform/x86/intel/speed_select_if/isst_tpmi_core.c +31 -7
index 6bcbb97b0101..7bac7841ff0a 100644
@@ -847,6 +847,8 @@ static int isst_if_get_perf_level(void __user *argp)
 {
 	struct isst_perf_level_info perf_level;
 	struct tpmi_per_power_domain_info *power_domain_info;
+	unsigned long level_mask;
+	u8 level, support;
 
 	if (copy_from_user(&perf_level, argp, sizeof(perf_level)))
 		return -EFAULT;
@@ -866,12 +868,34 @@ static int isst_if_get_perf_level(void __user *argp)
 		      SST_PP_FEATURE_STATE_START, SST_PP_FEATURE_STATE_WIDTH, SST_MUL_FACTOR_NONE)
 	perf_level.enabled = !!(power_domain_info->sst_header.cap_mask & BIT(1));
 
-	_read_bf_level_info("bf_support", perf_level.sst_bf_support, 0, 0,
-			    SST_BF_FEATURE_SUPPORTED_START, SST_BF_FEATURE_SUPPORTED_WIDTH,
-			    SST_MUL_FACTOR_NONE);
-	_read_tf_level_info("tf_support", perf_level.sst_tf_support, 0, 0,
-			    SST_TF_FEATURE_SUPPORTED_START, SST_TF_FEATURE_SUPPORTED_WIDTH,
-			    SST_MUL_FACTOR_NONE);
+	level_mask = perf_level.level_mask;
+	perf_level.sst_bf_support = 0;
+	for_each_set_bit(level, &level_mask, BITS_PER_BYTE) {
+		/*
+		 * Read BF support for a level. Read output is updated
+		 * to "support" variable by the below macro.
+		 */
+		_read_bf_level_info("bf_support", support, level, 0, SST_BF_FEATURE_SUPPORTED_START,
+				    SST_BF_FEATURE_SUPPORTED_WIDTH, SST_MUL_FACTOR_NONE);
+
+		/* If supported set the bit for the level */
+		if (support)
+			perf_level.sst_bf_support |= BIT(level);
+	}
+
+	perf_level.sst_tf_support = 0;
+	for_each_set_bit(level, &level_mask, BITS_PER_BYTE) {
+		/*
+		 * Read TF support for a level. Read output is updated
+		 * to "support" variable by the below macro.
+		 */
+		_read_tf_level_info("tf_support", support, level, 0, SST_TF_FEATURE_SUPPORTED_START,
+				    SST_TF_FEATURE_SUPPORTED_WIDTH, SST_MUL_FACTOR_NONE);
+
+		/* If supported set the bit for the level */
+		if (support)
+			perf_level.sst_tf_support |= BIT(level);
+	}
 
 	if (copy_to_user(argp, &perf_level, sizeof(perf_level)))
 		return -EFAULT;
@@ -1648,7 +1672,7 @@ void tpmi_sst_dev_resume(struct auxiliary_device *auxdev)
 }
 EXPORT_SYMBOL_NS_GPL(tpmi_sst_dev_resume, INTEL_TPMI_SST);
 
-#define ISST_TPMI_API_VERSION	0x02
+#define ISST_TPMI_API_VERSION	0x03
 
 int tpmi_sst_init(void)
 {