Skip to contentSkip to conversation

Qualcomm clock updates for v6.10

GIT PULL Bjorn Andersson 2 participants 2 messages May 8, 2024 – May 9, 2024

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

The following changes since commit 4cece764965020c22cff7665b18a012006359095:

Linux 6.9-rc1 (2024-03-24 14:10:05 -0700)

are available in the Git repository at:

https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git tags/qcom-clk-for-6.10

for you to fetch changes up to 3c5b3e17b8fd1f1add5a9477306c355fab126977:

clk: qcom: clk-alpha-pll: fix rate setting for Stromer PLLs (2024-05-07 21:10:18 -0500)

----------------------------------------------------------------
Qualcomm clock updates for v6.10

Support in RCG and RCG2 are added for supporting setups where the same frequency can be reached through multiple configurations. This is then used to rework the IPQ8074 NSS port 5 and 6 clocks to resolve issues with certain frequencies.

The APSS IPQ5018 PLL type is corrected, to resolve an issue with some boards failing to boot. The configuration is further corrected, to reduce the max CPU frequency to its expected value. This comes with a few more cleanups and corrections for Stromer PLLs.

Kconfig dependencies are corrected for SM8650 GPU and SC8280XP camera clock controllers.

The MSM8998 Venus clocks are corrected, to make Venus functional.

Downstream remnants related to DisplayPort are cleaned up across SM8450, SM6350, SM8550, and SM8650.

The MSM8996 CBF PLL is cleaned up by reusing the Huayra APSS register map.

The seemingly generic configuration of HFPLL is replaced by adding a QCS404-specific compatible.

On SM8150 the CPUSS AHB clock source clock is removed, as this is not controlled by Linux.

An unused field is removed in the RPM clock controller context. Missing MODULE_DEVICE_TABLE is added to MSM8917 and MSM8953 global clock controller drivers.

----------------------------------------------------------------
Abel Vesa (1):
clk: qcom: clk-alpha-pll: Skip reconfiguring the running Lucid Evo

Bjorn Andersson (1):

      Merge branch '[email protected]' into clk-for-6.10

Christian Marangi (3):
clk: qcom: clk-rcg: introduce support for multiple conf for same freq
clk: qcom: clk-rcg2: add support for rcg2 freq multi ops
clk: qcom: gcc-ipq8074: rework nss_port5/6 clock to multiple conf

Christophe JAILLET (1):
clk: qcom: rpm: Remove an unused field in struct rpm_cc

Dmitry Baryshkov (4):
clk: qcom: dispcc-sm8450: fix DisplayPort clocks
clk: qcom: dispcc-sm6350: fix DisplayPort clocks
clk: qcom: dispcc-sm8550: fix DisplayPort clocks
clk: qcom: dispcc-sm8650: fix DisplayPort clocks

Gabor Juhos (11):
clk: qcom: clk-alpha-pll: remove invalid Stromer register offset
clk: qcom: clk-alpha-pll: reorder Stromer register offsets
clk: qcom: clk-alpha-pll: fix kerneldoc of struct clk_alpha_pll
clk: qcom: apss-ipq-pll: use stromer ops for IPQ5018 to fix boot failure
clk: qcom: apss-ipq-pll: reuse Stromer reg offsets from 'clk_alpha_pll_regs'
clk: qcom: apss-ipq-pll: move Huayra register map to 'clk_alpha_pll_regs'
clk: qcom: apss-ipq-pll: constify match data structures
clk: qcom: apss-ipq-pll: constify clk_init_data structures
clk: qcom: clk-cbf-8996: use HUAYRA_APSS register map for cbf_pll
clk: qcom: apss-ipq-pll: fix PLL rate for IPQ5018
clk: qcom: clk-alpha-pll: fix rate setting for Stromer PLLs

Krzysztof Kozlowski (1):
clk: qcom: fix module autoloading

Luca Weiss (2):
dt-bindings: clock: qcom,hfpll: Convert to YAML
clk: qcom: hfpll: Add QCS404-specific compatible

Marc Gonzalez (1):
clk: qcom: mmcc-msm8998: fix venus clock issue

Nathan Chancellor (2):
clk: qcom: Fix SC_CAMCC_8280XP dependencies
clk: qcom: Fix SM_GPUCC_8650 dependencies

Satya Priya Kakitapalli (1):
clk: qcom: gcc-sm8150: De-register gcc_cpuss_ahb_clk_src

 .../devicetree/bindings/clock/qcom,hfpll.txt       |  63 --------
 .../devicetree/bindings/clock/qcom,hfpll.yaml      |  69 +++++++++
 drivers/clk/qcom/Kconfig                           |   2 +
 drivers/clk/qcom/apss-ipq-pll.c                    |  75 +++++-----
 drivers/clk/qcom/clk-alpha-pll.c                   |  24 ++-
 drivers/clk/qcom/clk-alpha-pll.h                   |   5 +-
 drivers/clk/qcom/clk-cbf-8996.c                    |  13 +-
 drivers/clk/qcom/clk-rcg.h                         |  24 ++-
 drivers/clk/qcom/clk-rcg2.c                        | 166 +++++++++++++++++++++
 drivers/clk/qcom/clk-rpm.c                         |   1 -
 drivers/clk/qcom/common.c                          |  18 +++
 drivers/clk/qcom/common.h                          |   2 +
 drivers/clk/qcom/dispcc-sm6350.c                   |  11 +-
 drivers/clk/qcom/dispcc-sm8450.c                   |  20 +--
 drivers/clk/qcom/dispcc-sm8550.c                   |  20 +--
 drivers/clk/qcom/dispcc-sm8650.c                   |  20 +--
 drivers/clk/qcom/gcc-ipq8074.c                     | 120 +++++++++------
 drivers/clk/qcom/gcc-msm8917.c                     |   1 +
 drivers/clk/qcom/gcc-msm8953.c                     |   1 +
 drivers/clk/qcom/gcc-sm8150.c                      |  61 --------
 drivers/clk/qcom/hfpll.c                           |   6 +-
 drivers/clk/qcom/mmcc-msm8998.c                    |   8 +
 22 files changed, 445 insertions(+), 285 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/qcom,hfpll.txt
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,hfpll.yaml
maintainer
#1 lore raw

Quoting Bjorn Andersson (2024-05-07 19:36:48)

Quoted 7 lines

The following changes since commit 4cece764965020c22cff7665b18a012006359095:

Linux 6.9-rc1 (2024-03-24 14:10:05 -0700)

are available in the Git repository at:

Quoted 7 lines

https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git tags/qcom-clk-for-6.10

for you to fetch changes up to 3c5b3e17b8fd1f1add5a9477306c355fab126977:

clk: qcom: clk-alpha-pll: fix rate setting for Stromer PLLs (2024-05-07 21:10:18 -0500)

----------------------------------------------------------------

Thanks. Pulled into clk-next