hwmon: (lm80) Add support for Texas Instruments AMC80
Subsystems (2)
Add support for AMC80 which is register compatible with LM96080
PS -let me know if you'd like me to update other broken links in docs.
Signed-off-by Andrei Aldea <[email protected]>
--- Documentation/hwmon/lm80.rst | 20 +++++++++++++++----- drivers/hwmon/Kconfig | 4 ++-- drivers/hwmon/lm80.c | 6 ++++++ 3 files changed, 23 insertions(+), 7 deletions(-)
Documentation/hwmon/lm80.rst +15 -5
@@ -9,9 +9,9 @@ Supported chips: Addresses scanned: I2C 0x28 - 0x2f - Datasheet: Publicly available at the National Semiconductor website + Datasheet: Publicly available at the Texas Instruments website - http://www.national.com/ + http://www.ti.com/product/LM80 * National Semiconductor LM96080
@@ -19,10 +19,19 @@ Supported chips: Addresses scanned: I2C 0x28 - 0x2f - Datasheet: Publicly available at the National Semiconductor website + Datasheet: Publicly available at the Texas Instruments website - http://www.national.com/ + http://www.ti.com/product/LM96080 + * Texas Instruments AMC80 + + Prefix: "amc80" + + Addresses scanned: I2C 0x28 - 0x2f + + Datasheet: Publicly available at the Texas Instruments website + + http://www.ti.com/product/AMC80 Authors: - Frodo Looijaard <[email protected]>,
@@ -35,7 +44,8 @@ This driver implements support for the National Semiconductor LM80. It is described as a 'Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor'. The LM96080 is a more recent incarnation, it is pin and register compatible, with a few additional features not -yet supported by the driver. +yet supported by the driver. The AMC80 is pin and register compatible +with the LM96080 and only changes the manufacturer ID. The LM80 implements one temperature sensor, two fan rotation speed sensors, seven voltage sensors, alarms, and some miscellaneous stuff.
drivers/hwmon/Kconfig +2 -2
@@ -1446,11 +1446,11 @@ config SENSORS_LM78 will be called lm78. config SENSORS_LM80 - tristate "National Semiconductor LM80 and LM96080" + tristate "National Semiconductor LM80 and compatibles" depends on I2C help If you say yes here you get support for National Semiconductor - LM80 and LM96080 sensor chips. + LM80, LM96080 and Texas Instruments AMC80 sensor chips. This driver can also be built as a module. If so, the module will be called lm80.
drivers/hwmon/lm80.c +6 -0
@@ -573,6 +573,11 @@ static int lm80_detect(struct i2c_client *client, struct i2c_board_info *info)return -ENODEV ; name ="lm96080" ; + +/* Check for AMC80 version which is register compatible with lm96080 */ + }else if (man_id ==0x80 && dev_id ==0x08 ) { + name ="amc80" ; + }else {/* Check 6-bit addressing */ for (i =0x2a ; i <=0x3d ; i++) {
@@ -624,6 +629,7 @@ static int lm80_probe(struct i2c_client *client)static const struct i2c_device_id lm80_id[] = { {"lm80" ,0 }, {"lm96080" ,1 }, + {"amc80" ,2 }, { } };MODULE_DEVICE_TABLE (i2c, lm80_id);
Signature · 1 line
2.39.3 (Apple Git-146)