wifi: rtw89: 8852b: restore setting for RFE type 5 after device resume
Ping-Ke Shih
maintainerPATCH 1/1 wifi: rtw89: 8852b: restore setting for RFE type 5 after device resume
The RFE type 5 set SPS analog parameters only once at probe stage, but the setting is missing after suspend/resume, so remove restriction and set the value when card power on/off.
Fixes 3ef60f44830a ("wifi: rtw89: 8852b: update hardware parameters for RFE type 5")
Signed-off-by Ping-Ke Shih <[email protected]>
--- drivers/net/wireless/realtek/rtw89/rtw8852b.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/net/wireless/realtek/rtw89/rtw8852b.c +3 -3
@@ -403,6 +403,8 @@ static int rtw8852b_pwr_on_func(struct rtw89_dev *rtwdev)u32 val32;u32 ret; +rtw8852b_pwr_sps_ana (rtwdev); +rtw89_write32_clr (rtwdev,R_AX_SYS_PW_CTRL ,B_AX_AFSM_WLSUS_EN |B_AX_AFSM_PCIE_SUS_EN );rtw89_write32_set (rtwdev,R_AX_SYS_PW_CTRL ,B_AX_DIS_WLBT_PDNSUSEN_SOPC );
@@ -530,9 +532,7 @@ static int rtw8852b_pwr_off_func(struct rtw89_dev *rtwdev)u32 val32;u32 ret; -/* Only do once during probe stage after reading efuse */ -if (!test_bit (RTW89_FLAG_PROBE_DONE , rtwdev->flags)) -rtw8852b_pwr_sps_ana (rtwdev); +rtw8852b_pwr_sps_ana (rtwdev); ret =rtw89_mac_write_xtal_si (rtwdev,XTAL_SI_ANAPAR_WL ,XTAL_SI_RFC2RF ,XTAL_SI_RFC2RF );
Signature · 1 line
2.25.1
Ping-Ke Shih
maintainerQuoted 6 lines · Ping-Ke Shih
The RFE type 5 set SPS analog parameters only once at probe stage, but the setting is missing after suspend/resume, so remove restriction and set the value when card power on/off.
Fixes 3ef60f44830a ("wifi: rtw89: 8852b: update hardware parameters for RFE type 5")Signed-off-by Ping-Ke Shih <[email protected]>
1 patch(es) applied to rtw-next branch of rtw.git, thanks.
2c1fc7c24cd4 wifi: rtw89: 8852b: restore setting for RFE type 5 after device resume