Skip to contentSkip to conversation

drm/rockchip: vop: clear DMA stop bit on flush on RK3066

PATCH Superseded Val Packett 3 participants 11 messages May 19, 2024 – May 27, 2024

Subsystems (5)

v1 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 drm/rockchip: vop: clear DMA stop bit on flush on RK3066

On the RK3066, there is a bit that must be cleared on flush, otherwise we do not get display output (at least for RGB).

---
Hi! This was required to get display working on an old RK3066 tablet, along with the next tiny patch in the series enabling the RGB output.

I have spent quite a lot of time banging my head against the wall debugging that display (especially since at the same time a scaler chip is used for LVDS encoding), but finally adding debug prints showed that RK3066_SYS_CTRL0 ended up being reset to all-zero after being written correctly upon init. Looking at the register definitions in the vendor driver revealed that the reason was pretty self-explanatory: "dma_stop".

---
 drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 3 +++
 drivers/gpu/drm/rockchip/rockchip_drm_vop.h | 1 +
 drivers/gpu/drm/rockchip/rockchip_vop_reg.c | 1 +
 3 files changed, 5 insertions(+)
drivers/gpu/drm/rockchip/rockchip_drm_vop.c +3 -0
index a13473b2d..d4daeba74 100644
@@ -1578,6 +1578,9 @@ static void vop_crtc_atomic_flush(struct drm_crtc *crtc,
 
 	spin_lock(&vop->reg_lock);
 
+	/* If the chip has a DMA stop bit (RK3066), it must be cleared. */
+	VOP_REG_SET(vop, common, dma_stop, 0);
+
 	/* Enable AFBC if there is some AFBC window, disable otherwise. */
 	s = to_rockchip_crtc_state(crtc->state);
 	VOP_AFBC_SET(vop, enable, s->enable_afbc);
drivers/gpu/drm/rockchip/rockchip_drm_vop.h +1 -0
index b33e5bdc2..0cf512cc1 100644
@@ -122,6 +122,7 @@ struct vop_common {
 	struct vop_reg lut_buffer_index;
 	struct vop_reg gate_en;
 	struct vop_reg mmu_en;
+	struct vop_reg dma_stop;
 	struct vop_reg out_mode;
 	struct vop_reg standby;
 };
drivers/gpu/drm/rockchip/rockchip_vop_reg.c +1 -0
index b9ee02061..9bcb40a64 100644
@@ -466,6 +466,7 @@ static const struct vop_output rk3066_output = {
 };
 
 static const struct vop_common rk3066_common = {
+	.dma_stop = VOP_REG(RK3066_SYS_CTRL0, 0x1, 0),
 	.standby = VOP_REG(RK3066_SYS_CTRL0, 0x1, 1),
 	.out_mode = VOP_REG(RK3066_DSP_CTRL0, 0xf, 0),
 	.cfg_done = VOP_REG(RK3066_REG_CFG_DONE, 0x1, 0),
Signature · 1 line
2.45.0
#1 lore raw

PATCH 2/2 drm/rockchip: vop: enable VOP_FEATURE_INTERNAL_RGB on RK3066

---
 drivers/gpu/drm/rockchip/rockchip_vop_reg.c | 1 +
 1 file changed, 1 insertion(+)
drivers/gpu/drm/rockchip/rockchip_vop_reg.c +1 -0
index 9bcb40a64..e2c6ba26f 100644
@@ -515,6 +515,7 @@ static const struct vop_data rk3066_vop = {
 	.output = &rk3066_output,
 	.win = rk3066_vop_win_data,
 	.win_size = ARRAY_SIZE(rk3066_vop_win_data),
+	.feature = VOP_FEATURE_INTERNAL_RGB,
 	.max_output = { 1920, 1080 },
 };
 
Signature · 1 line
2.45.0
maintainer
#2 lore raw

Re: [PATCH 2/2] drm/rockchip: vop: enable VOP_FEATURE_INTERNAL_RGB on RK3066

Quoted 5 lines · Val Packett
---
 drivers/gpu/drm/rockchip/rockchip_vop_reg.c | 1 +
 1 file changed, 1 insertion(+)

Maybe the DRM subsystem has more lax rules, but I know I can't take patches without any changelog text at all, sorry.

greg k-h

maintainer
#3 lore raw
In reply to Val Packett
Quoted 9 lines · Val Packett

On the RK3066, there is a bit that must be cleared on flush, otherwise we do not get display output (at least for RGB).

---
Hi! This was required to get display working on an old RK3066 tablet, along with the next tiny patch in the series enabling the RGB output.

Quoted 6 lines

I have spent quite a lot of time banging my head against the wall debugging that display (especially since at the same time a scaler chip is used for LVDS encoding), but finally adding debug prints showed that RK3066_SYS_CTRL0 ended up being reset to all-zero after being written correctly upon init. Looking at the register definitions in the vendor driver revealed that the reason was pretty self-explanatory: "dma_stop".

What commit id does this fix?

thanks,

greg k-h

#4 lore raw
Quoted 6 lines · Greg KH
Quoted 3 lines · Val Packett

On the RK3066, there is a bit that must be cleared on flush,
otherwise
we do not get display output (at least for RGB).

What commit id does this fix?

I guess: f4a6de855e "drm: rockchip: vop: add rk3066 vop definitions" ?

But similar changes like:
742203cd "drm: rockchip: add missing registers for RK3066" 8d544233 "drm/rockchip: vop: Add directly output rgb feature for px30" did not have any "Fixes" reference.

~val

maintainer
#5 lore raw
Quoted 4 lines · Val Packett

On Sun, May 19 2024 at 09:59:47 +02:00:00, Greg KH <[email protected]> wrote:

Quoted 8 lines
Quoted 6 lines · Val Packett
Quoted 3 lines

On the RK3066, there is a bit that must be cleared on flush,
otherwise
we do not get display output (at least for RGB).

What commit id does this fix?

I guess: f4a6de855e "drm: rockchip: vop: add rk3066 vop definitions" ?

Great, can you add a Fixes: tag when you resend these?

Quoted 4 lines

But similar changes like:
742203cd "drm: rockchip: add missing registers for RK3066" 8d544233 "drm/rockchip: vop: Add directly output rgb feature for px30" did not have any "Fixes" reference.

Just because people didn't properly tag things in the past, doesn't mean you should perpetuate that problem :)

thanks,

greg k-h

#6 lore raw

PATCH v2 1/2 drm/rockchip: vop: clear DMA stop bit upon vblank on RK3066

On the RK3066, there is a bit that must be cleared, otherwise the picture does not show up on the display (at least for RGB).

Fixes f4a6de8 ("drm: rockchip: vop: add rk3066 vop definitions")

---
v2: doing this on vblank makes more sense; added fixes tag

---
 drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 6 ++++++
 drivers/gpu/drm/rockchip/rockchip_drm_vop.h | 1 +
 drivers/gpu/drm/rockchip/rockchip_vop_reg.c | 1 +
 3 files changed, 8 insertions(+)
drivers/gpu/drm/rockchip/rockchip_drm_vop.c +6 -0
index a13473b2d..2731fe2b2 100644
@@ -1766,6 +1766,12 @@ static void vop_handle_vblank(struct vop *vop)
 	}
 	spin_unlock(&drm->event_lock);
 
+	if (VOP_HAS_REG(vop, common, dma_stop)) {
+		spin_lock(&vop->reg_lock);
+		VOP_REG_SET(vop, common, dma_stop, 0);
+		spin_unlock(&vop->reg_lock);
+	}
+
 	if (test_and_clear_bit(VOP_PENDING_FB_UNREF, &vop->pending))
 		drm_flip_work_commit(&vop->fb_unref_work, system_unbound_wq);
 }
drivers/gpu/drm/rockchip/rockchip_drm_vop.h +1 -0
index b33e5bdc2..0cf512cc1 100644
@@ -122,6 +122,7 @@ struct vop_common {
 	struct vop_reg lut_buffer_index;
 	struct vop_reg gate_en;
 	struct vop_reg mmu_en;
+	struct vop_reg dma_stop;
 	struct vop_reg out_mode;
 	struct vop_reg standby;
 };
drivers/gpu/drm/rockchip/rockchip_vop_reg.c +1 -0
index b9ee02061..9bcb40a64 100644
@@ -466,6 +466,7 @@ static const struct vop_output rk3066_output = {
 };
 
 static const struct vop_common rk3066_common = {
+	.dma_stop = VOP_REG(RK3066_SYS_CTRL0, 0x1, 0),
 	.standby = VOP_REG(RK3066_SYS_CTRL0, 0x1, 1),
 	.out_mode = VOP_REG(RK3066_DSP_CTRL0, 0xf, 0),
 	.cfg_done = VOP_REG(RK3066_REG_CFG_DONE, 0x1, 0),
Signature · 1 line
2.45.1
#7 lore raw

PATCH v2 2/2 drm/rockchip: vop: enable VOP_FEATURE_INTERNAL_RGB on RK3066

The RK3066 does have RGB display output, so it should be marked as such.

Fixes f4a6de8 ("drm: rockchip: vop: add rk3066 vop definitions")

---
v2: expanded commit message

---
 drivers/gpu/drm/rockchip/rockchip_vop_reg.c | 1 +
 1 file changed, 1 insertion(+)
drivers/gpu/drm/rockchip/rockchip_vop_reg.c +1 -0
index 9bcb40a64..e2c6ba26f 100644
@@ -515,6 +515,7 @@ static const struct vop_data rk3066_vop = {
 	.output = &rk3066_output,
 	.win = rk3066_vop_win_data,
 	.win_size = ARRAY_SIZE(rk3066_vop_win_data),
+	.feature = VOP_FEATURE_INTERNAL_RGB,
 	.max_output = { 1920, 1080 },
 };
 
Signature · 1 line
2.45.1
maintainer
#8 lore raw

Re: [PATCH v2 1/2] drm/rockchip: vop: clear DMA stop bit upon vblank on RK3066

In reply to Val Packett

Hi Val,

Am Montag, 27. Mai 2024, 09:16:33 CEST schrieb Val Packett:

Quoted 8 lines

On the RK3066, there is a bit that must be cleared, otherwise the picture does not show up on the display (at least for RGB).

Fixes f4a6de8 ("drm: rockchip: vop: add rk3066 vop definitions")

---
v2: doing this on vblank makes more sense; added fixes tag

can you give a rationale for this please?

I.e. does this dma-stop bit need to be set on each vblank that happens to push this frame to the display somehow?

Because at least in theory atomic_flush where this was living in in v1, might happen at a slower interval?

Thanks
Heiko

Quoted 48 lines
---
 drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 6 ++++++
 drivers/gpu/drm/rockchip/rockchip_drm_vop.h | 1 +
 drivers/gpu/drm/rockchip/rockchip_vop_reg.c | 1 +
 3 files changed, 8 insertions(+)
drivers/gpu/drm/rockchip/rockchip_drm_vop.c +6 -0
index a13473b2d..2731fe2b2 100644
@@ -1766,6 +1766,12 @@ static void vop_handle_vblank(struct vop *vop)
 	}
 	spin_unlock(&drm->event_lock);
 
+	if (VOP_HAS_REG(vop, common, dma_stop)) {
+		spin_lock(&vop->reg_lock);
+		VOP_REG_SET(vop, common, dma_stop, 0);
+		spin_unlock(&vop->reg_lock);
+	}
+
 	if (test_and_clear_bit(VOP_PENDING_FB_UNREF, &vop->pending))
 		drm_flip_work_commit(&vop->fb_unref_work, system_unbound_wq);
 }
drivers/gpu/drm/rockchip/rockchip_drm_vop.h +1 -0
index b33e5bdc2..0cf512cc1 100644
@@ -122,6 +122,7 @@ struct vop_common {
 	struct vop_reg lut_buffer_index;
 	struct vop_reg gate_en;
 	struct vop_reg mmu_en;
+	struct vop_reg dma_stop;
 	struct vop_reg out_mode;
 	struct vop_reg standby;
 };
drivers/gpu/drm/rockchip/rockchip_vop_reg.c +1 -0
index b9ee02061..9bcb40a64 100644
@@ -466,6 +466,7 @@ static const struct vop_output rk3066_output = {
 };
 
 static const struct vop_common rk3066_common = {
+	.dma_stop = VOP_REG(RK3066_SYS_CTRL0, 0x1, 0),
 	.standby = VOP_REG(RK3066_SYS_CTRL0, 0x1, 1),
 	.out_mode = VOP_REG(RK3066_DSP_CTRL0, 0xf, 0),
 	.cfg_done = VOP_REG(RK3066_REG_CFG_DONE, 0x1, 0),
#9 lore raw

Re: [PATCH v2 1/2] drm/rockchip: vop: clear DMA stop bit upon vblank on RK3066

Quoted 13 lines · Heiko Stübner

Hi Val,

Am Montag, 27. Mai 2024, 09:16:33 CEST schrieb Val Packett:

Quoted 9 lines

On the RK3066, there is a bit that must be cleared, otherwise the picture does not show up
on the display (at least for RGB).

Fixes f4a6de8 ("drm: rockchip: vop: add rk3066 vop definitions")

---
v2: doing this on vblank makes more sense; added fixes tag

Quoted 4 lines

can you give a rationale for this please?

I.e. does this dma-stop bit need to be set on each vblank that happens to push this frame to the display somehow?

The only things I'm 100% sure about:

- that bit is called dma_stop in the Android kernel's header;
- without ever setting that bit to 1, it was getting set to 1 by the chip itself, as logging the register on flush was showing a 1 in that position (it was the only set bit - I guess others aren't readable after cfg_done?);
- without clearing it "between" frames, the whole screen is always filled with noise, the picture is not visible.

The rest is at least a bit (ha) speculative:

As I understand from what the name implies, the hardware sets it to indicate that it has scanned out the frame and is waiting for acknowledgment (clearing) to be able to scan out the next frame. I guess it's a redundant synchronization mechanism that was removed in later iterations of the VOP hardware block.

I've been trying to see if moving where I clear the bit affects the sort-of-tearing-but-vertical glitches that sometimes happen, especially early on after the system has just booted, but that seems to be completely unrelated pixel clock craziness (the Android kernel runs the screen at 66 fps, interestingly).

I'm fairly confident that both places are "correct". The reason I'm more on the side of vblank now is that it made logical sense to me when I thought about it more: acknowledging that the frame has been scanned out is a reaction to the frame having been scanned out. It's a consequence of *that* that the acknowledgment is required for the next frame to be drawn.

Unless we can get the opinion of someone closely familiar with this decade-old hardware, we only have this reasoning to go off of :)

~val

Quoted 1 line
maintainer
#10 lore raw

Re: [PATCH v2 1/2] drm/rockchip: vop: clear DMA stop bit upon vblank on RK3066

Hey,

Am Dienstag, 28. Mai 2024, 00:13:59 CEST schrieb Val Packett:

Quoted 50 lines
Quoted 11 lines · Heiko Stübner

Am Montag, 27. Mai 2024, 09:16:33 CEST schrieb Val Packett:

Quoted 9 lines

On the RK3066, there is a bit that must be cleared, otherwise the picture does not show up
on the display (at least for RGB).

Fixes f4a6de8 ("drm: rockchip: vop: add rk3066 vop definitions")

---
v2: doing this on vblank makes more sense; added fixes tag

Quoted 4 lines

can you give a rationale for this please?

I.e. does this dma-stop bit need to be set on each vblank that happens to push this frame to the display somehow?

The only things I'm 100% sure about:

- that bit is called dma_stop in the Android kernel's header;
- without ever setting that bit to 1, it was getting set to 1 by the chip itself, as logging the register on flush was showing a 1 in that position (it was the only set bit - I guess others aren't readable after cfg_done?);
- without clearing it "between" frames, the whole screen is always filled with noise, the picture is not visible.

The rest is at least a bit (ha) speculative:

As I understand from what the name implies, the hardware sets it to indicate that it has scanned out the frame and is waiting for acknowledgment (clearing) to be able to scan out the next frame. I guess it's a redundant synchronization mechanism that was removed in later iterations of the VOP hardware block.

I've been trying to see if moving where I clear the bit affects the sort-of-tearing-but-vertical glitches that sometimes happen, especially early on after the system has just booted, but that seems to be completely unrelated pixel clock craziness (the Android kernel runs the screen at 66 fps, interestingly).

I'm fairly confident that both places are "correct". The reason I'm more on the side of vblank now is that it made logical sense to me when I thought about it more: acknowledging that the frame has been scanned out is a reaction to the frame having been scanned out. It's a consequence of *that* that the acknowledgment is required for the next frame to be drawn.

Quoted 2 lines

Unless we can get the opinion of someone closely familiar with this decade-old hardware, we only have this reasoning to go off of :)

Actually that reasoning was exactly what I was hoping for :-) . And it actually also makes perfect sense.

I was somehow thinking this needs to be set only when starting output and not as sort of an Ack.

Could you do a v3 with:
- the findings from above slightly condensed in the commit message It's really helpful when someone stumbles onto that commit 10 years from now and can get this really helpful explanation from the commit message.
- sending it as a _new_ thread
Having v2 as reply to v1 patches confuses tooling that then can't distinguish what is actually part of this v2

Thanks a lot
Heiko