Skip to contentSkip to conversation

perf docs: Fix typos

PATCH Applied Ian Rogers 3 participants 3 messages May 21, 2024 – May 29, 2024 perf events

lore
Share & tools
lore

Ian Rogers

author reviewer
#0 lore raw

PATCH 1/1 perf docs: Fix typos

Assorted typo fixes.

---
 tools/perf/Documentation/perf-kwork.txt  | 4 ++--
 tools/perf/Documentation/perf-mem.txt    | 2 +-
 tools/perf/Documentation/perf-record.txt | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)
tools/perf/Documentation/perf-kwork.txt +2 -2
index 109ace1d5e90..21e607669d78 100644
@@ -1,4 +1,4 @@
-perf-kowrk(1)
+perf-kwork(1)
 =============
 
 NAME
@@ -35,7 +35,7 @@ There are several variants of 'perf kwork':
         perf kwork top
         perf kwork top -b
 
-   By default it shows the individual work events such as irq, workqeueu,
+   By default it shows the individual work events such as irq, workqueue,
    including the run time and delay (time between raise and actually entry):
 
       Runtime start      Runtime end        Cpu     Kwork name                 Runtime     Delaytime
tools/perf/Documentation/perf-mem.txt +1 -1
index 19862572e3f2..47456b212e99 100644
@@ -21,7 +21,7 @@ and stores are sampled. Use the -t option to limit to loads or stores.
 
 Note that on Intel systems the memory latency reported is the use-latency,
 not the pure load (or store latency). Use latency includes any pipeline
-queueing delays in addition to the memory subsystem latency.
+queuing delays in addition to the memory subsystem latency.
 
 On Arm64 this uses SPE to sample load and store operations, therefore hardware
 and kernel support is required. See linkperf:perf-arm-spe[1] for a setup guide.
tools/perf/Documentation/perf-record.txt +1 -1
index 6015fdd08fb6..77578c0a142a 100644
@@ -311,7 +311,7 @@ OPTIONS
 	User can change the size by passing the size after comma like
 	"--call-graph dwarf,4096".
 
-	When "fp" recording is used, perf tries to save stack enties
+	When "fp" recording is used, perf tries to save stack entries
 	up to the number specified in sysctl.kernel.perf_event_max_stack
 	by default.  User can change the number by passing it after comma
 	like "--call-graph fp,32".
Signature · 1 line
2.45.1.288.g0e0cd299f1-goog
Reviewed-by on v1 1/1
#1 lore raw
Quoted 3 lines · Ian Rogers

Assorted typo fixes.

Quoted 51 lines
---
 tools/perf/Documentation/perf-kwork.txt  | 4 ++--
 tools/perf/Documentation/perf-mem.txt    | 2 +-
 tools/perf/Documentation/perf-record.txt | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)
tools/perf/Documentation/perf-kwork.txt +2 -2
index 109ace1d5e90..21e607669d78 100644
@@ -1,4 +1,4 @@
-perf-kowrk(1)
+perf-kwork(1)
 =============
 
 NAME
@@ -35,7 +35,7 @@ There are several variants of 'perf kwork':
         perf kwork top
         perf kwork top -b
 
-   By default it shows the individual work events such as irq, workqeueu,
+   By default it shows the individual work events such as irq, workqueue,
    including the run time and delay (time between raise and actually entry):
 
       Runtime start      Runtime end        Cpu     Kwork name                 Runtime     Delaytime
tools/perf/Documentation/perf-mem.txt +1 -1
index 19862572e3f2..47456b212e99 100644
@@ -21,7 +21,7 @@ and stores are sampled. Use the -t option to limit to loads or stores.
 
 Note that on Intel systems the memory latency reported is the use-latency,
 not the pure load (or store latency). Use latency includes any pipeline
-queueing delays in addition to the memory subsystem latency.
+queuing delays in addition to the memory subsystem latency.
 
 On Arm64 this uses SPE to sample load and store operations, therefore hardware
 and kernel support is required. See linkperf:perf-arm-spe[1] for a setup guide.
tools/perf/Documentation/perf-record.txt +1 -1
index 6015fdd08fb6..77578c0a142a 100644
@@ -311,7 +311,7 @@ OPTIONS
 	User can change the size by passing the size after comma like
 	"--call-graph dwarf,4096".
 
-	When "fp" recording is used, perf tries to save stack enties
+	When "fp" recording is used, perf tries to save stack entries
 	up to the number specified in sysctl.kernel.perf_event_max_stack
 	by default.  User can change the number by passing it after comma
 	like "--call-graph fp,32".